From mboxrd@z Thu Jan 1 00:00:00 1970 Subject: Re: Boa Cross Compile for MPC8266ADS? From: Craig Hollabaugh To: C Doyle Cc: linuxppc-embedded@lists.linuxppc.org In-Reply-To: References: Content-Type: text/plain Date: 26 Jul 2003 08:38:40 -0600 Message-Id: <1059230320.506.11.camel@ch> Mime-Version: 1.0 Sender: owner-linuxppc-embedded@lists.linuxppc.org List-Id: Doyle, Sorry so long on the reply. This page http://www.embeddedlinuxinterfacing.com/projectboa.shtml explains how to cross compile boa Craig On Tue, 2003-07-22 at 08:19, C Doyle wrote: > > Hello all, > I'm a student working with Motorola for a dissertation project. I'm > using the MPC8266ADS-PCI development board to write a device driver for > a usb peripheral. What I'm intending to do is use the Boa Webserver to > throw up a webpage and run cgi-scripts to configure the device driver > from a remote host and also give some Tx/Rx/Error reporting. I'm quite > new to the embedded world and I can't seem to get Boa to cross compile > for the board. I'm using the hardahat devkit cross compiler but when I > point the Make file to the compiler its not happy. Is there anyone who > has already compiled this for the MPC8266 and can I use the ./configure > shell script with flags to tell it I want to cross compile? Any help > would be greatly appreciated as the homepage only describes the setup > with the default ./configure script. Thanx > > > -- ------------------------------------------------------------ Dr. Craig Hollabaugh, craig@hollabaugh.com Author of Embedded Linux: Hardware, Software and Interfacing www.embeddedlinuxinterfacing.com ** Sent via the linuxppc-embedded mail list. See http://lists.linuxppc.org/