From: Joel Smith <joelsmith17@comcast.net>
To: Tomi Orava <Tomi.Orava@ncircle.nullnet.fi>, linux-kernel@vger.kernel.org
Subject: Re: HighPoint 374
Date: Sun, 19 Oct 2003 14:12:40 -0700 [thread overview]
Message-ID: <1066597959.7576.11.camel@milo.comcast.net> (raw)
In-Reply-To: <41102.192.168.9.10.1066584247.squirrel@ncircle.nullnet.fi>
> > In 2.4.21 and 2.4.22 it's working great for me. I'm using the
> > "experimental" IDE Raid with two disks on a HPT 374 controller with the
> > drivers that come with the kernel.
>
> I have tried these versions in the past as well without success.
> However, I don't use HPT-raid features at all ie. I'm using the
> disks as JBOD. What hardware do you have and have you enabled
> ACPI/local-apic/io-apic ? What brand & model of disk-drives you
> are using with HPT374 controller ? And finally what does
> the /proc/interrupts show for you ?
The disks are both 80 GB Western Digital 7200RPM/8 MB cache (WD800JB).
FWIW, the motherboard is an Abit IT7-Max 2 v. 2.0, and I'm currently
using 2.4.22-ck2. The HPT374 chip is on the motherboard. I don't have
any ACPI stuff enabled, and I'm not sure what apic is.
Here's my /proc/interrupts:
CPU0
0: 490407020 XT-PIC timer
1: 160679 XT-PIC keyboard
2: 0 XT-PIC cascade
4: 0 XT-PIC usb-uhci
5: 31664356 XT-PIC eth1, Intel 82801DB-ICH4
7: 35088687 XT-PIC usb-uhci, nvidia
9: 0 XT-PIC usb-uhci
11: 1895235 XT-PIC ide2, ide3
12: 4340909 XT-PIC PS/2 Mouse
15: 117429 XT-PIC ide1
NMI: 0
ERR: 0
HTH,
Joel Smith
next prev parent reply other threads:[~2003-10-19 21:12 UTC|newest]
Thread overview: 50+ messages / expand[flat|nested] mbox.gz Atom feed top
2003-10-18 9:44 HighPoint 374 Carlos Fernandez Sanz
2003-10-18 10:15 ` Måns Rullgård
2003-10-19 12:13 ` Tomi Orava
2003-10-19 16:48 ` Carlos Fernandez Sanz
2003-10-19 17:16 ` Tomi Orava
2003-10-19 17:39 ` Carlos Fernandez Sanz
2003-10-19 19:27 ` Tomi Orava
2003-10-19 19:35 ` Carlos Fernandez Sanz
2003-10-19 15:59 ` Joel Smith
2003-10-19 17:24 ` Tomi Orava
2003-10-19 17:42 ` Måns Rullgård
2003-10-19 19:14 ` Tomi Orava
2003-10-19 19:27 ` Carlos Fernandez Sanz
2003-10-19 19:39 ` Tomi Orava
2003-10-19 20:12 ` Carlos Fernandez Sanz
2003-10-19 19:39 ` Måns Rullgård
2003-10-19 19:54 ` David B. Stevens
2003-10-20 8:38 ` Geller Sandor
2003-10-19 21:12 ` Joel Smith [this message]
2003-10-19 17:28 ` Carlos Fernandez Sanz
2003-10-19 21:35 ` Joel Smith
2003-10-19 19:42 Christian Guggenberger
2003-10-19 19:54 ` Tomi Orava
2003-10-19 19:57 Svetoslav Slavtchev
2003-10-19 20:30 ` Andre Hedrick
2003-10-19 20:46 ` Svetoslav Slavtchev
2003-10-19 20:51 ` Bartlomiej Zolnierkiewicz
2003-10-19 20:54 ` Svetoslav Slavtchev
2003-10-20 6:48 ` Jens Axboe
2003-10-20 7:43 ` Tomi Orava
2003-10-20 8:10 ` Svetoslav Slavtchev
2003-10-20 8:21 ` Nick Piggin
2003-10-20 8:30 ` Svetoslav Slavtchev
2003-10-19 21:51 ` Tomi Orava
2003-10-19 22:00 ` Svetoslav Slavtchev
2003-10-19 22:11 ` Svetoslav Slavtchev
2003-10-19 22:24 ` Tomi Orava
2003-10-20 7:53 ` Svetoslav Slavtchev
2003-10-20 8:03 ` Tomi Orava
2003-10-20 9:03 ` Svetoslav Slavtchev
2003-10-20 17:02 ` Carlos Fernandez Sanz
2003-10-20 19:14 ` Svetoslav Slavtchev
2003-10-20 20:23 ` Carlos Fernandez Sanz
2003-10-20 21:07 ` Svetoslav Slavtchev
2003-10-20 21:25 ` Bartlomiej Zolnierkiewicz
2003-10-20 21:25 ` Svetoslav Slavtchev
2003-10-21 18:43 ` Tomi Orava
2003-10-21 18:50 ` Tomi Orava
2003-10-21 9:23 Jindrich Makovicka
2003-10-21 16:59 ` Tomi Orava
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1066597959.7576.11.camel@milo.comcast.net \
--to=joelsmith17@comcast.net \
--cc=Tomi.Orava@ncircle.nullnet.fi \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.