From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S268899AbUJKMqg (ORCPT ); Mon, 11 Oct 2004 08:46:36 -0400 Received: (majordomo@vger.kernel.org) by vger.kernel.org id S268915AbUJKMpH (ORCPT ); Mon, 11 Oct 2004 08:45:07 -0400 Received: from mail.bfi-burgenland.at ([213.33.127.134]:26340 "EHLO mailrelay.bfi-burgenland.at") by vger.kernel.org with ESMTP id S268899AbUJKMmx (ORCPT ); Mon, 11 Oct 2004 08:42:53 -0400 Subject: Kernel hang when checking partitions on SATA drive (SCSI-libsata, VIA SATA) From: Andreas Grabner To: linux-kernel@vger.kernel.org Content-Type: text/plain Message-Id: <1097498573.20515.24.camel@sprint150> Mime-Version: 1.0 X-Mailer: Ximian Evolution 1.4.6 Date: Mon, 11 Oct 2004 14:42:53 +0200 Content-Transfer-Encoding: 7bit X-Spam-Score: 0.0 (/) X-Spam-Report: Spam detection software, running on the system "jupiter.ow.bfi-bgld.at", has identified this incoming email as possible spam. The original message has been attached to this so you can view it (if it isn't spam) or block similar future email. If you have any questions, see http://www.bfi-ma.at/spam/ for details. Content preview: Hello, please CC me to your replies as I'm not currently a subscriber; thanks in advance. I have a Problem with kernel 2.6.8.1 and maybe the sata_via driver. It hang while booting. The following messages appear: [...] Content analysis details: (0.0 points, 9.0 required) pts rule name description ---- ---------------------- -------------------------------------------------- Sender: linux-kernel-owner@vger.kernel.org X-Mailing-List: linux-kernel@vger.kernel.org Hello, please CC me to your replies as I'm not currently a subscriber; thanks in advance. I have a Problem with kernel 2.6.8.1 and maybe the sata_via driver. It hang while booting. The following messages appear: SCSI device sda: 390721968 512-byte hdwr sectors (2000050MB) SCSI device sda: drive cache: write back sda:<3>ata1: command 0x25 timeout, stat 0x50 host_stat 0x4 after 5 seconds: sda1 sda2 sda3 sda4 < then there is nothing more. Kernel 2.4.25 works so i think my Hardware (A7V600-X, Sempron 2800+, SEGATE ST3200822AS) is ok. Any hints what is wrong? Thanks in advance for your help. Best Regards, Andreas Grabner