* [git patches] libata updates 1 of 3
@ 2007-02-10 1:09 Jeff Garzik
2007-02-10 5:46 ` Markus Trippelsdorf
0 siblings, 1 reply; 12+ messages in thread
From: Jeff Garzik @ 2007-02-10 1:09 UTC (permalink / raw)
To: linux-ide; +Cc: LKML
(just sent this upstream to Andrew and Linus)
This is libata push 1 of 3. This is largely the "accumulated driver
updates" push: lots of minor changes. A few new drivers.
The most notable thing is "devres", an optional subsystem for drivers
that greatly simplifies the task of driver housekeeping, if you have
to acquire+map then later unmap+free a bunch of MMIO resources,
some PIO resources, an IRQ (or two or three) like we do with ATA
host controllers. devres is only used by libata drivers at the moment,
but the APIs are generic enough to be used by any driver. This should
enable the elimination of several highly common code patterns in various
drivers.
devres, in turn, has enabled us to finally merge the patches that convert
libata to using the lib/iomap.c stuff. Anyone with eyes can see the
code savings in libata-sff that iomap brings.
Kudos to Tejun Heo for the devres work.
I will be pushing ACPI support on Saturday or Sunday, in order to stage
it into a separate 2.6.20-gitX snapshot. That's libata push 2 of 3.
The third push will eliminate the ugly split-driver configuration
created by quirk_intel_ide_combined() and ____request_resource(),
whereby libata claims one half of a controller (SATA), and old-IDE
claims the other half (PATA). libata wins the battle for DMA and IRQ,
and so old-IDE (PATA) is driven via the slower PIO data xfer methods.
Was necessary at the time, as libata lacked ATAPI support and old-IDE
failed to handle irq storms created by newer Intel IDE irq-ack behavior.
But times have changed, and neither conditions remain true. So we can
remove the hacks.
Please pull from 'upstream-linus' branch of
master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/libata-dev.git upstream-linus
to receive the following updates:
Documentation/driver-model/devres.txt | 268 +++++++++++
drivers/ata/Kconfig | 41 ++-
drivers/ata/Makefile | 3 +
drivers/ata/ahci.c | 236 +++-------
drivers/ata/ata_generic.c | 8 +-
drivers/ata/ata_piix.c | 56 ++--
drivers/ata/libata-core.c | 591 ++++++++-----------------
drivers/ata/libata-eh.c | 7 +-
drivers/ata/libata-scsi.c | 98 +++--
drivers/ata/libata-sff.c | 641 ++++++++-------------------
drivers/ata/libata.h | 4 +-
drivers/ata/pata_ali.c | 32 +-
drivers/ata/pata_amd.c | 36 +-
drivers/ata/pata_artop.c | 12 +-
drivers/ata/pata_atiixp.c | 6 +-
drivers/ata/pata_cmd64x.c | 18 +-
drivers/ata/pata_cs5520.c | 41 ++-
drivers/ata/pata_cs5530.c | 41 +-
drivers/ata/pata_cs5535.c | 6 +-
drivers/ata/pata_cypress.c | 6 +-
drivers/ata/pata_efar.c | 6 +-
drivers/ata/pata_hpt366.c | 26 +-
drivers/ata/pata_hpt37x.c | 61 +--
drivers/ata/pata_hpt3x2n.c | 26 +-
drivers/ata/pata_hpt3x3.c | 8 +-
drivers/ata/pata_isapnp.c | 21 +-
drivers/ata/pata_it8213.c | 354 +++++++++++++++
drivers/ata/pata_it821x.c | 58 +--
drivers/ata/pata_ixp4xx_cf.c | 50 +--
drivers/ata/pata_jmicron.c | 8 +-
drivers/ata/pata_legacy.c | 166 ++++----
drivers/ata/pata_marvell.c | 12 +-
drivers/ata/pata_mpc52xx.c | 538 +++++++++++++++++++++++
drivers/ata/pata_mpiix.c | 113 ++---
drivers/ata/pata_netcell.c | 6 +-
drivers/ata/pata_ns87410.c | 6 +-
drivers/ata/pata_oldpiix.c | 24 +-
drivers/ata/pata_opti.c | 24 +-
drivers/ata/pata_optidma.c | 40 +-
drivers/ata/pata_pcmcia.c | 27 +-
drivers/ata/pata_pdc2027x.c | 122 ++---
drivers/ata/pata_pdc202xx_old.c | 41 +-
drivers/ata/pata_platform.c | 67 +---
drivers/ata/pata_qdi.c | 50 ++-
drivers/ata/pata_radisys.c | 6 +-
drivers/ata/pata_rz1000.c | 6 +-
drivers/ata/pata_sc1200.c | 6 +-
drivers/ata/pata_serverworks.c | 31 +-
drivers/ata/pata_sil680.c | 8 +-
drivers/ata/pata_sis.c | 70 +++-
drivers/ata/pata_sl82c105.c | 10 +-
drivers/ata/pata_triflex.c | 6 +-
drivers/ata/pata_via.c | 22 +-
drivers/ata/pata_winbond.c | 49 ++-
drivers/ata/pdc_adma.c | 120 ++----
drivers/ata/sata_inic162x.c | 781 +++++++++++++++++++++++++++++++++
drivers/ata/sata_mv.c | 200 +++------
drivers/ata/sata_nv.c | 629 ++++++++++++++++-----------
drivers/ata/sata_promise.c | 379 +++++++++++-----
drivers/ata/sata_qstor.c | 138 ++----
drivers/ata/sata_sil.c | 99 ++---
drivers/ata/sata_sil24.c | 178 +++-----
drivers/ata/sata_sis.c | 161 +++++---
drivers/ata/sata_svw.c | 127 +++---
drivers/ata/sata_sx4.c | 207 +++------
drivers/ata/sata_uli.c | 66 ++--
drivers/ata/sata_via.c | 193 ++++++---
drivers/ata/sata_vsc.c | 134 +++---
drivers/base/Kconfig | 12 +
drivers/base/Makefile | 1 +
drivers/base/base.h | 1 +
drivers/base/core.c | 2 +
drivers/base/dd.c | 3 +
drivers/base/devres.c | 644 +++++++++++++++++++++++++++
drivers/base/dma-mapping.c | 218 +++++++++
drivers/base/dmapool.c | 59 +++
drivers/pci/pci.c | 127 ++++++-
drivers/pci/quirks.c | 2 +-
include/linux/ata.h | 13 +-
include/linux/device.h | 38 ++
include/linux/dma-mapping.h | 29 ++-
include/linux/dmapool.h | 7 +
include/linux/interrupt.h | 6 +
include/linux/io.h | 21 +
include/linux/ioport.h | 20 +
include/linux/libata.h | 131 ++----
include/linux/pci.h | 9 +
include/linux/pci_ids.h | 3 +
kernel/irq/manage.c | 86 ++++
kernel/resource.c | 62 +++
lib/Makefile | 3 +-
lib/iomap.c | 299 +++++++++++++-
92 files changed, 6210 insertions(+), 3217 deletions(-)
create mode 100644 Documentation/driver-model/devres.txt
create mode 100644 drivers/ata/pata_it8213.c
create mode 100644 drivers/ata/pata_mpc52xx.c
create mode 100644 drivers/ata/sata_inic162x.c
create mode 100644 drivers/base/devres.c
create mode 100644 drivers/base/dma-mapping.c
Adrian Bunk (2):
drivers/ata/: make 4 functions static
fix CONFIG_SATA_SIS=y compile error
Akira Iguchi (2):
libata: add another IRQ calls (core and headers)
libata: add another IRQ calls (libata drivers)
Alan (10):
pata_it8213: Add new driver for the IT8213 card
sata_via: PATA support
libata-sff: Don't try and activate channels which are not in use
ahci: Remove jmicron fixup
libata: PIIX3 support
libata: trivial stuff
sata_sis: Support for PATA supports
Kconfig: clarify ATA_PIIX description
ata: Add defines for the iordy bits
libata: Early CFA adapters are not required to support mode setting
Alan Cox (1):
pci: Move PCI_VDEVICE from libata to core
Andrew Morton (2):
libata piix3 support warning fix
git-libata-all: forward declare struct device
Arjan van de Ven (1):
user of the jiffies rounding patch: ATA subsystem
Conke Hu (1):
Add pci class code for SATA & AHCI, and replace some magic numbers.
Dan Wolstenholme (1):
[libata] sata_vsc: support PCI MSI
Eric D. Mudama (1):
libata: rearrange dmesg info to add full ATA revision
J J (1):
ata_piix: add ICH7 on Acer 3682WLMi to laptop list
Jakub W. Jozwicki J (1):
pata_sis: implement laptop list and add ASUS A6K/A6U
Jeff Garzik (5):
[libata] trim trailing whitespace
[libata] sata_vsc: build fix after PCI MSI feature addition
[libata] Shuffle DRV_xxx in core and SiS drivers, to kill warnings
libata: build fix after dmesg probe output changes
libata: kill ATA_ENABLE_PATA
Mikael Pettersson (5):
sata_promise: TX2plus PATA support
sata_promise: ATAPI support
sata_promise: ATAPI cleanup
sata_promise: issue ATAPI commands as normal packets
sata_promise: handle ATAPI_NODATA ourselves
Robert Hancock (5):
sata_nv: add suspend/resume support v3 (Resubmit)
sata_nv: cleanup ADMA error handling
sata_nv: use ADMA for NODATA commands
sata_nv: wait for response on entering/leaving ADMA mode
sata_nv: propagate ata_pci_device_do_resume return value
Sergei Shtylyov (4):
pata_sl82c105: wrong assumptions about compatible PIO modes
(2.6.20) pata_oldpiix: fix PIO2 underclocking
(2.6.20) pata_mpiix: fix PIO setup issues
(2.6.20) pata_mpiix: probing cleanup (resend)
Sylvain Munaut (1):
libata: Add support for the MPC52xx ATA controller
Tejun Heo (18):
libata: straighten out ATA_ID_* constants
libata: use ata_id_c_string()
libata: handle pci_enable_device() failure while resuming
libata: kill qc->nsect and cursect
sata_inic162x: finally, driver for initio 162x SATA controllers, take #2
sata_promise: kill qc->nsect
libata: implement HDIO_GET_IDENTITY
devres: device resource management
libata: implement ata_host_detach()
libata: update libata core layer to use devres
libata: update libata LLDs to use devres
libata: remove unused functions
devres: implement pcim_iomap_regions()
iomap: iomap should be in obj-y not in lib-y
pata_platform: fix devres conversion
libata: convert to iomap
libata: add 150ms between completion of hardreset and status checking
sata_inic162x: fix a few glitches in hardreset
Uwe Koziolek (1):
sata_sis: support SiS966/966L
^ permalink raw reply [flat|nested] 12+ messages in thread* Re: [git patches] libata updates 1 of 3 2007-02-10 1:09 [git patches] libata updates 1 of 3 Jeff Garzik @ 2007-02-10 5:46 ` Markus Trippelsdorf 2007-02-10 10:20 ` David Woodhouse 2007-02-11 22:08 ` Tejun Heo 0 siblings, 2 replies; 12+ messages in thread From: Markus Trippelsdorf @ 2007-02-10 5:46 UTC (permalink / raw) To: Jeff Garzik; +Cc: linux-ide, LKML This update breaks sata_via on my VIA K8T800Pro machine: sata_via 0000:00:0f.0 : failed to iomap PCI BAR 0 sata_via 0000:00:0f.0 : out of memory sata_via probe of 0000:00:0f.0 failed with error -12 -- Markus ^ permalink raw reply [flat|nested] 12+ messages in thread
* Re: [git patches] libata updates 1 of 3 2007-02-10 5:46 ` Markus Trippelsdorf @ 2007-02-10 10:20 ` David Woodhouse 2007-02-11 22:08 ` Tejun Heo 1 sibling, 0 replies; 12+ messages in thread From: David Woodhouse @ 2007-02-10 10:20 UTC (permalink / raw) To: Markus Trippelsdorf; +Cc: Jeff Garzik, linux-ide, LKML On Sat, 2007-02-10 at 06:46 +0100, Markus Trippelsdorf wrote: > sata_via 0000:00:0f.0 : failed to iomap PCI BAR 0 Zero probably isn't allowed any more. We have to use PCI BAR 1 and upwards only or the poor driver authors will get confused :) -- dwmw2 ^ permalink raw reply [flat|nested] 12+ messages in thread
* Re: [git patches] libata updates 1 of 3 2007-02-10 5:46 ` Markus Trippelsdorf 2007-02-10 10:20 ` David Woodhouse @ 2007-02-11 22:08 ` Tejun Heo 2007-02-12 2:58 ` Markus Trippelsdorf 1 sibling, 1 reply; 12+ messages in thread From: Tejun Heo @ 2007-02-11 22:08 UTC (permalink / raw) To: Markus Trippelsdorf; +Cc: Jeff Garzik, linux-ide, LKML Markus Trippelsdorf wrote: > This update breaks sata_via on my VIA K8T800Pro machine: > > sata_via 0000:00:0f.0 : failed to iomap PCI BAR 0 > sata_via 0000:00:0f.0 : out of memory > sata_via probe of 0000:00:0f.0 failed with error -12 Please post full dmesg and the result of 'lspci -nnvvvxxx'. -- tejun ^ permalink raw reply [flat|nested] 12+ messages in thread
* Re: [git patches] libata updates 1 of 3 2007-02-11 22:08 ` Tejun Heo @ 2007-02-12 2:58 ` Markus Trippelsdorf 2007-02-12 18:51 ` [PATCH] sata_via: fix resource-managed iomap conversion Tejun Heo 0 siblings, 1 reply; 12+ messages in thread From: Markus Trippelsdorf @ 2007-02-12 2:58 UTC (permalink / raw) To: Tejun Heo; +Cc: Jeff Garzik, linux-ide, LKML [-- Attachment #1: Type: text/plain, Size: 593 bytes --] On Sun, Feb 11, 2007 at 05:08:17PM -0500, Tejun Heo wrote: > Markus Trippelsdorf wrote: > >This update breaks sata_via on my VIA K8T800Pro machine: > > > > sata_via 0000:00:0f.0 : failed to iomap PCI BAR 0 > > sata_via 0000:00:0f.0 : out of memory > > sata_via probe of 0000:00:0f.0 failed with error -12 > > Please post full dmesg and the result of 'lspci -nnvvvxxx'. > I attach the output of both commands from the last working kernel. Because my root directory lies on the sata drive I get a kernel panic otherwise. I have no possibility to do remote debugging at the moment. -- Markus [-- Attachment #2: lspci --] [-- Type: text/plain, Size: 34818 bytes --] 00:00.0 Host bridge [0600]: VIA Technologies, Inc. K8T800Pro Host Bridge [1106:0282] Subsystem: ASUSTeK Computer Inc. A8V Deluxe [1043:80a3] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ >SERR- <PERR- Latency: 64 Region 0: Memory at <ignored> (32-bit, prefetchable) Capabilities: [80] AGP version 3.0 Status: RQ=32 Iso- ArqSz=0 Cal=2 SBA+ ITACoh- GART64- HTrans- 64bit- FW- AGP3+ Rate=x4,x8 Command: RQ=1 ArqSz=0 Cal=0 SBA+ AGP+ GART64- 64bit- FW- Rate=x8 Capabilities: [50] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 PME-Enable- DSel=0 DScale=0 PME- Capabilities: [60] HyperTransport: Slave or Primary Interface !!! Possibly incomplete decoding Command: BaseUnitID=0 UnitCnt=3 MastHost- DefDir- Link Control 0: CFlE- CST- CFE- <LkFail- Init+ EOC- TXO- <CRCErr=0 Link Config 0: MLWI=16bit MLWO=16bit LWI=16bit LWO=16bit Link Control 1: CFlE- CST- CFE- <LkFail+ Init- EOC+ TXO+ <CRCErr=0 Link Config 1: MLWI=8bit MLWO=8bit LWI=8bit LWO=8bit Revision ID: 1.02 Capabilities: [58] HyperTransport: Interrupt Discovery and Configuration 00: 06 11 82 02 06 01 30 22 00 00 00 06 00 40 80 00 10: 08 00 00 d8 00 00 00 00 00 00 00 00 00 00 00 00 20: 00 00 00 00 00 00 00 00 00 00 00 00 43 10 a3 80 30: 00 00 00 00 80 00 00 00 00 00 00 00 00 00 00 00 40: 7f 11 21 00 00 00 00 00 00 00 1f c4 00 04 00 01 50: 01 60 02 00 00 00 00 00 08 00 01 80 00 00 00 00 60: 08 58 60 00 20 00 11 11 d0 00 00 00 22 05 75 00 70: 02 00 00 00 00 00 00 00 00 00 00 00 08 00 00 00 80: 02 50 30 00 0b 0a 00 1f 02 03 00 00 28 00 00 00 90: 80 03 00 00 20 0f 01 00 00 00 00 00 00 00 00 00 a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 b0: 00 00 00 00 00 00 00 00 00 40 00 00 06 08 00 88 c0: 51 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00:00.1 Host bridge [0600]: VIA Technologies, Inc. K8T800Pro Host Bridge [1106:1282] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 0 00: 06 11 82 12 06 00 00 02 00 00 00 06 00 00 00 00 10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00:00.2 Host bridge [0600]: VIA Technologies, Inc. K8T800Pro Host Bridge [1106:2282] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 0 00: 06 11 82 22 06 00 00 02 00 00 00 06 00 00 00 00 10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 a0: 13 87 20 31 30 2c 80 86 7f 8f 44 22 45 00 22 40 b0: 1f 13 00 00 03 00 00 00 00 00 00 00 00 00 00 00 c0: 20 00 00 00 50 50 00 00 00 00 00 00 00 00 00 00 d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00:00.3 Host bridge [0600]: VIA Technologies, Inc. K8T800Pro Host Bridge [1106:3282] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 0 00: 06 11 82 32 06 00 00 02 00 00 00 06 00 00 00 00 10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 40: 00 00 00 00 00 00 00 80 00 00 00 00 00 00 00 00 50: 22 22 00 00 00 00 e4 00 00 00 00 00 00 00 00 00 60: 00 00 00 00 00 00 00 00 00 00 00 10 00 00 00 00 70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 80: 00 00 c0 00 00 ff 19 00 00 00 00 00 00 00 00 00 90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 a0: 00 00 00 00 00 20 00 00 00 00 00 00 00 00 00 00 b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00:00.4 Host bridge [0600]: VIA Technologies, Inc. K8T800Pro Host Bridge [1106:4282] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 0 00: 06 11 82 42 06 00 00 02 00 00 00 06 00 00 00 00 10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 a0: 80 00 ff 00 00 00 00 00 00 00 00 00 00 00 00 00 b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00:00.7 Host bridge [0600]: VIA Technologies, Inc. K8T800Pro Host Bridge [1106:7282] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 0 00: 06 11 82 72 06 00 00 02 00 00 00 06 00 00 00 00 10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 30: 00 00 00 00 a0 00 00 00 00 00 00 00 00 00 00 00 40: 00 19 88 80 82 44 00 22 1b 39 88 80 82 44 00 00 50: 00 00 00 00 00 00 01 80 08 00 01 80 00 00 00 00 60: 00 00 00 c0 00 00 00 00 00 00 00 00 00 00 00 00 70: c0 c8 ee 01 24 07 50 00 01 00 00 00 7f 00 00 0a 80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 b0: 05 00 00 f2 25 46 46 02 89 a4 aa 01 00 00 00 00 c0: 01 00 02 00 00 00 00 00 00 00 00 00 00 00 00 00 d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 e0: 00 00 00 00 00 00 19 00 00 00 00 00 00 00 00 00 f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00:01.0 PCI bridge [0604]: VIA Technologies, Inc. VT8237 PCI bridge [K8T800/K8T890 South] [1106:b188] (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 0 Bus: primary=00, secondary=01, subordinate=01, sec-latency=0 I/O behind bridge: 0000e000-0000efff Memory behind bridge: fbd00000-fbffffff Prefetchable memory behind bridge: e8000000-faffffff Secondary status: 66MHz+ FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- <SERR- <PERR- BridgeCtl: Parity- SERR+ NoISA- VGA+ MAbort- >Reset- FastB2B- Capabilities: [80] Power Management version 2 Flags: PMEClk- DSI- D1+ D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 PME-Enable- DSel=0 DScale=0 PME- 00: 06 11 88 b1 07 01 30 02 00 00 04 06 00 00 01 00 10: 00 00 00 00 00 00 00 00 00 01 01 00 e0 e0 20 02 20: d0 fb f0 fb 00 e8 f0 fa 00 00 00 00 00 00 00 00 30: 00 00 00 00 80 00 00 00 00 00 00 00 00 00 0a 00 40: 91 40 80 44 35 3a 88 b1 00 00 00 00 00 00 00 00 50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 80: 01 00 02 02 00 00 00 00 00 00 00 00 00 00 00 00 90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00:0c.0 Multimedia video controller [0400]: Brooktree Corporation Bt878 Video Capture [109e:036e] (rev 11) Subsystem: Pinnacle Systems Inc. PCTV pro (TV + FM stereo receiver) [11bd:0012] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 64 (4000ns min, 10000ns max) Interrupt: pin A routed to IRQ 17 Region 0: Memory at e7e00000 (32-bit, prefetchable) [size=4K] Capabilities: [44] Vital Product Data Capabilities: [4c] Power Management version 2 Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 PME-Enable- DSel=0 DScale=0 PME- 00: 9e 10 6e 03 06 01 90 02 11 00 00 04 00 40 80 00 10: 08 00 e0 e7 00 00 00 00 00 00 00 00 00 00 00 00 20: 00 00 00 00 00 00 00 00 00 00 00 00 bd 11 12 00 30: 00 00 00 00 44 00 00 00 00 00 00 00 0a 01 10 28 40: 00 00 00 00 03 4c 00 00 00 00 00 00 01 00 22 00 50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00:0c.1 Multimedia controller [0480]: Brooktree Corporation Bt878 Audio Capture [109e:0878] (rev 11) Subsystem: Pinnacle Systems Inc. PCTV pro (TV + FM stereo receiver, audio section) [11bd:0012] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 64 (1000ns min, 63750ns max) Interrupt: pin A routed to IRQ 10 Region 0: Memory at e7f00000 (32-bit, prefetchable) [size=4K] Capabilities: [44] Vital Product Data Capabilities: [4c] Power Management version 2 Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 PME-Enable- DSel=0 DScale=0 PME- 00: 9e 10 78 08 06 01 90 02 11 00 80 04 00 40 80 00 10: 08 00 f0 e7 00 00 00 00 00 00 00 00 00 00 00 00 20: 00 00 00 00 00 00 00 00 00 00 00 00 bd 11 12 00 30: 00 00 00 00 44 00 00 00 00 00 00 00 0a 01 04 ff 40: 00 00 00 00 03 4c 00 00 00 00 00 00 01 00 22 00 50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00:0e.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL-8169 Gigabit Ethernet [10ec:8169] (rev 10) Subsystem: Realtek Semiconductor Co., Ltd. RTL-8169 Gigabit Ethernet [10ec:8169] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B- Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 64 (8000ns min, 16000ns max), Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 19 Region 0: I/O ports at a800 [size=256] Region 1: Memory at fba00000 (32-bit, non-prefetchable) [size=256] Expansion ROM at fb900000 [disabled] [size=128K] Capabilities: [dc] Power Management version 2 Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=375mA PME(D0-,D1+,D2+,D3hot+,D3cold+) Status: D0 PME-Enable- DSel=0 DScale=0 PME- 00: ec 10 69 81 17 01 b0 02 10 00 00 02 10 40 00 00 10: 01 a8 00 00 00 00 a0 fb 00 00 00 00 00 00 00 00 20: 00 00 00 00 00 00 00 00 00 00 00 00 ec 10 69 81 30: 00 00 90 fb dc 00 00 00 00 00 00 00 03 01 20 40 40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 d0: 00 00 00 00 00 00 00 00 00 00 00 00 01 00 c2 f7 e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00:0f.0 RAID bus controller [0104]: VIA Technologies, Inc. VIA VT6420 SATA RAID Controller [1106:3149] (rev 80) Subsystem: ASUSTeK Computer Inc. A7V600/K8V Deluxe/K8V-X/A8V Deluxe motherboard [1043:80ed] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 64 Interrupt: pin B routed to IRQ 20 Region 0: I/O ports at c800 [size=8] Region 1: I/O ports at c400 [size=4] Region 2: I/O ports at c000 [size=8] Region 3: I/O ports at b800 [size=4] Region 4: I/O ports at b400 [size=16] Region 5: I/O ports at b000 [size=256] Capabilities: [c0] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 PME-Enable- DSel=0 DScale=0 PME- 00: 06 11 49 31 07 00 90 02 80 00 04 01 00 40 80 00 10: 01 c8 00 00 01 c4 00 00 01 c0 00 00 01 b8 00 00 20: 01 b4 00 00 01 b0 00 00 00 00 00 00 43 10 ed 80 30: 00 00 00 00 c0 00 00 00 00 00 00 00 0a 02 00 00 40: 33 03 f1 44 06 af 00 00 10 82 65 03 00 00 00 00 50: 00 00 00 00 00 00 04 04 00 10 10 00 05 00 10 00 60: 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 70: 00 00 00 00 00 00 00 00 01 00 01 10 10 00 00 00 80: 00 00 00 00 00 00 00 00 00 e0 73 7f 00 00 00 00 90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 c0: 01 00 02 00 00 00 00 00 00 00 00 00 00 00 00 00 d0: 80 02 49 31 43 10 ed 80 00 00 00 00 00 00 00 00 e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00:0f.1 IDE interface [0101]: VIA Technologies, Inc. VT82C586A/B/VT82C686/A/B/VT823x/A/C PIPC Bus Master IDE [1106:0571] (rev 06) (prog-if 8a [Master SecP PriP]) Subsystem: ASUSTeK Computer Inc. A7V600/K8V-X/A8V Deluxe motherboard [1043:80ed] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 32 Interrupt: pin A routed to IRQ 20 Region 0: [virtual] Memory at 000001f0 (32-bit, non-prefetchable) [size=8] Region 1: [virtual] Memory at 000003f0 (type 3, non-prefetchable) [size=1] Region 2: [virtual] Memory at 00000170 (32-bit, non-prefetchable) [size=8] Region 3: [virtual] Memory at 00000370 (type 3, non-prefetchable) [size=1] Region 4: I/O ports at fc00 [size=16] Capabilities: [c0] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 PME-Enable- DSel=0 DScale=0 PME- 00: 06 11 71 05 07 00 90 02 06 8a 01 01 00 20 00 00 10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 20: 01 fc 00 00 00 00 00 00 00 00 00 00 43 10 ed 80 30: 00 00 00 00 c0 00 00 00 00 00 00 00 ff 01 00 00 40: 3b f2 09 05 18 8c c0 00 a8 20 a8 a8 ff 00 20 b6 50: 17 e2 07 07 0c 00 00 00 a8 a8 a8 a8 00 00 00 00 60: 00 02 00 00 00 00 00 00 00 02 00 00 00 00 00 00 70: 82 01 00 00 00 00 00 00 02 01 00 00 00 00 00 00 80: 00 00 00 00 00 00 00 00 00 40 74 7f 00 00 00 00 90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 c0: 01 00 02 00 00 00 00 00 00 00 00 00 00 00 00 00 d0: 06 00 71 05 43 10 ed 80 00 00 00 00 00 00 00 00 e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 f0: 00 00 00 00 00 00 09 00 00 00 00 00 00 00 00 00 00:10.0 USB Controller [0c03]: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller [1106:3038] (rev 81) (prog-if 00 [UHCI]) Subsystem: ASUSTeK Computer Inc. A7V600/K8V-X/A8V Deluxe motherboard [1043:80ed] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 64, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 21 Region 4: I/O ports at d000 [size=32] Capabilities: [80] Power Management version 2 Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=375mA PME(D0+,D1+,D2+,D3hot+,D3cold+) Status: D0 PME-Enable- DSel=0 DScale=0 PME- 00: 06 11 38 30 17 00 10 02 81 00 03 0c 10 40 80 00 10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 20: 01 d0 00 00 00 00 00 00 00 00 00 00 43 10 ed 80 30: 00 00 00 00 80 00 00 00 00 00 00 00 0b 01 00 00 40: 40 12 03 00 00 00 00 00 a0 0b a0 00 00 00 00 00 50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 60: 10 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 80: 01 00 c2 ff 00 00 00 00 00 00 00 00 00 00 00 00 90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 c0: 00 20 00 00 00 00 00 00 00 00 00 00 00 00 00 00 d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 f0: 00 00 00 00 00 00 00 03 00 00 00 00 00 00 00 00 00:10.1 USB Controller [0c03]: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller [1106:3038] (rev 81) (prog-if 00 [UHCI]) Subsystem: ASUSTeK Computer Inc. A7V600/K8V-X/A8V Deluxe motherboard [1043:80ed] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 64, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 21 Region 4: I/O ports at d400 [size=32] Capabilities: [80] Power Management version 2 Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=375mA PME(D0+,D1+,D2+,D3hot+,D3cold+) Status: D0 PME-Enable- DSel=0 DScale=0 PME- 00: 06 11 38 30 17 00 10 02 81 00 03 0c 10 40 80 00 10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 20: 01 d4 00 00 00 00 00 00 00 00 00 00 43 10 ed 80 30: 00 00 00 00 80 00 00 00 00 00 00 00 0b 01 00 00 40: 40 12 03 00 00 00 00 00 a0 0b a0 00 00 00 00 00 50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 60: 10 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 80: 01 00 c2 ff 00 00 00 00 00 00 00 00 00 00 00 00 90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 c0: 00 20 00 00 00 00 00 00 00 00 00 00 00 00 00 00 d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 f0: 00 00 00 00 00 00 00 03 00 00 00 00 00 00 00 00 00:10.4 USB Controller [0c03]: VIA Technologies, Inc. USB 2.0 [1106:3104] (rev 86) (prog-if 20 [EHCI]) Subsystem: ASUSTeK Computer Inc. A7V600/K8V-X/A8V Deluxe motherboard [1043:80ed] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 64, Cache Line Size: 64 bytes Interrupt: pin C routed to IRQ 21 Region 0: Memory at fbc00000 (32-bit, non-prefetchable) [size=256] Capabilities: [80] Power Management version 2 Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=375mA PME(D0+,D1+,D2+,D3hot+,D3cold+) Status: D0 PME-Enable- DSel=0 DScale=0 PME- 00: 06 11 04 31 17 00 10 02 86 20 03 0c 10 40 80 00 10: 00 00 c0 fb 00 00 00 00 00 00 00 00 00 00 00 00 20: 00 00 00 00 00 00 00 00 00 00 00 00 43 10 ed 80 30: 00 00 00 00 80 00 00 00 00 00 00 00 05 03 00 00 40: 00 00 03 00 00 00 00 00 80 10 00 09 00 00 00 00 50: 00 5a 00 80 00 00 00 00 04 0b 88 88 33 88 88 00 60: 20 20 01 00 00 00 00 00 01 00 00 01 00 00 08 00 70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 80: 01 00 c2 ff 00 00 00 00 00 00 00 00 00 00 00 00 90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 f0: 00 00 00 00 00 00 88 00 00 00 00 00 00 00 00 00 00:11.0 ISA bridge [0601]: VIA Technologies, Inc. VT8237 ISA bridge [KT600/K8T800/K8T890 South] [1106:3227] Subsystem: ASUSTeK Computer Inc. A7V600/K8V-X/A8V Deluxe motherboard [1043:80ed] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping+ SERR- FastB2B- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 0 Capabilities: [c0] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 PME-Enable- DSel=0 DScale=0 PME- 00: 06 11 27 32 87 00 10 02 00 00 01 06 00 00 80 00 10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 20: 00 00 00 00 00 00 00 00 00 00 00 00 43 10 ed 80 30: 00 00 00 00 c0 00 00 00 00 00 00 00 00 00 00 00 40: 44 00 f8 00 00 00 00 00 0c 20 00 00 44 00 08 08 50: 05 8d 09 00 00 00 00 00 43 80 00 09 00 00 04 08 60: 00 00 00 00 10 00 02 04 00 00 00 00 00 00 00 00 70: 43 10 ed 80 00 00 00 00 00 00 00 00 20 00 00 00 80: 20 84 49 00 02 00 00 00 01 08 00 00 00 18 00 00 90: 00 00 b3 00 b0 c1 07 00 10 1f 00 00 00 00 00 00 a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 c0: 01 00 02 00 00 00 00 00 00 00 00 00 00 00 00 00 d0: 01 04 01 00 00 00 00 00 00 00 00 00 00 00 00 00 e0: 00 00 00 00 55 09 00 00 00 00 00 00 00 00 00 00 f0: 00 00 00 00 00 00 05 00 00 00 00 00 00 00 00 00 00:11.5 Multimedia audio controller [0401]: VIA Technologies, Inc. VT8233/A/8235/8237 AC97 Audio Controller [1106:3059] (rev 60) Subsystem: ASUSTeK Computer Inc. A8V Deluxe motherboard (Realtek ALC850 codec) [1043:812a] Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Interrupt: pin C routed to IRQ 22 Region 0: I/O ports at d800 [size=256] Capabilities: [c0] Power Management version 2 Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 PME-Enable- DSel=0 DScale=0 PME- 00: 06 11 59 30 01 00 10 02 60 00 01 04 00 00 00 00 10: 01 d8 00 00 00 00 00 00 00 00 00 00 00 00 00 00 20: 00 00 00 00 00 00 00 00 00 00 00 00 43 10 2a 81 30: 00 00 00 00 c0 00 00 00 00 00 00 00 05 03 00 00 40: 01 cc 00 00 50 00 00 00 00 00 00 00 00 00 00 00 50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 c0: 01 00 02 06 00 00 00 00 00 00 00 00 00 00 00 00 d0: 01 00 02 00 00 00 00 00 00 00 00 00 00 00 00 00 e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00:11.6 Communication controller [0780]: VIA Technologies, Inc. AC'97 Modem Controller [1106:3068] (rev 80) Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Interrupt: pin C routed to IRQ 0 Region 0: I/O ports at 1000 [disabled] [size=256] Capabilities: [d0] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 PME-Enable- DSel=0 DScale=0 PME- 00: 06 11 68 30 00 00 10 02 80 00 80 07 00 00 00 00 10: 01 10 00 00 00 00 00 00 00 00 00 00 00 00 00 00 20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 30: 00 00 00 00 d0 00 00 00 00 00 00 00 00 03 00 00 40: 01 cc 00 00 50 00 00 00 00 00 00 00 00 00 00 00 50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 c0: 01 00 02 06 00 00 00 00 00 00 00 00 00 00 00 00 d0: 01 00 02 00 00 00 00 00 00 00 00 00 00 00 00 00 e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00:18.0 Host bridge [0600]: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] HyperTransport Technology Configuration [1022:1100] Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- Capabilities: [80] HyperTransport: Host or Secondary Interface !!! Possibly incomplete decoding Command: WarmRst+ DblEnd- Link Control: CFlE- CST- CFE- <LkFail- Init+ EOC- TXO- <CRCErr=0 Link Config: MLWI=16bit MLWO=16bit LWI=16bit LWO=16bit Revision ID: 1.02 00: 22 10 00 11 00 00 10 00 00 00 00 06 00 00 80 00 10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 30: 00 00 00 00 80 00 00 00 00 00 00 00 00 00 00 00 40: 01 01 01 00 01 01 01 00 01 01 01 00 01 01 01 00 50: 01 01 01 00 01 01 01 00 01 01 01 00 01 01 01 00 60: 00 00 00 00 e4 00 00 00 20 c8 0e 0f 1c 00 00 00 70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 80: 08 00 01 21 20 00 11 11 22 05 75 80 02 00 00 00 90: 56 04 51 02 00 00 ff 00 07 00 00 00 00 00 00 00 a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00:18.1 Host bridge [0600]: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Address Map [1022:1101] Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- 00: 22 10 01 11 00 00 00 00 00 00 00 06 00 00 80 00 10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 40: 03 00 00 00 00 00 7f 00 00 00 00 00 01 00 00 00 50: 00 00 00 00 02 00 00 00 00 00 00 00 03 00 00 00 60: 00 00 00 00 04 00 00 00 00 00 00 00 05 00 00 00 70: 00 00 00 00 06 00 00 00 00 00 00 00 07 00 00 00 80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 b0: 03 0a 00 00 00 0b 00 00 03 00 80 00 00 ff ff 00 c0: 13 10 00 00 00 f0 ff 00 00 00 00 00 00 00 00 00 d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 e0: 03 00 00 ff 00 00 00 00 00 00 00 00 00 00 00 00 f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00:18.2 Host bridge [0600]: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] DRAM Controller [1022:1102] Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- 00: 22 10 02 11 00 00 00 00 00 00 00 06 00 00 80 00 10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 40: 01 00 00 00 00 00 00 00 01 00 00 04 01 00 00 06 50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 60: 00 fe e0 03 00 00 00 00 00 fe e0 01 00 fe e0 01 70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 80: 47 00 00 00 00 00 00 00 35 33 72 13 30 0a 00 00 90: 80 8c 05 38 07 08 5b 3e 00 00 00 00 0b 02 00 00 a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 b0: 55 6b 1a 98 81 00 00 00 c2 d8 16 b7 bd 6e cb 5f c0: 00 00 01 00 00 00 00 00 00 00 00 00 00 00 00 00 d0: a6 9a bb f5 6c 3a bd d7 af be fd 6d b3 2e 13 5e e0: 8d ca 9a fa f2 55 2d aa e5 af fa 73 a9 26 ce 9a f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00:18.3 Host bridge [0600]: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Miscellaneous Control [1022:1103] Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- 00: 22 10 03 11 00 00 00 00 00 00 00 06 00 00 80 00 10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 40: ff 3b 00 00 40 00 40 08 00 00 00 00 00 00 00 00 50: 00 00 00 00 00 00 00 00 00 00 02 00 00 48 a1 ef 60: 90 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 70: 11 01 02 51 11 80 00 50 00 38 00 08 1a 22 00 00 80: 00 00 07 23 13 21 13 21 00 00 00 00 00 00 00 00 90: 05 00 00 00 6c 00 00 00 00 fc 02 00 00 00 00 00 a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 b0: 00 00 00 00 00 00 00 00 37 00 00 00 01 70 20 58 c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 d0: 00 00 00 00 01 a7 0d 00 00 00 60 00 00 00 00 00 e0: 00 00 00 00 24 0c 54 10 19 11 00 00 00 00 00 00 f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 01:00.0 VGA compatible controller [0300]: ATI Technologies Inc RV280 [Radeon 9200 PRO] [1002:5960] (rev 01) (prog-if 00 [VGA]) Subsystem: Hightech Information System Ltd. Unknown device [17af:2020] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 64 (2000ns min), Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 16 Region 0: Memory at e8000000 (32-bit, prefetchable) [size=128M] Region 1: I/O ports at e000 [size=256] Region 2: Memory at fbe00000 (32-bit, non-prefetchable) [size=64K] Expansion ROM at fbd00000 [disabled] [size=128K] Capabilities: [58] AGP version 3.0 Status: RQ=256 Iso- ArqSz=0 Cal=0 SBA+ ITACoh- GART64- HTrans- 64bit- FW+ AGP3+ Rate=x4,x8 Command: RQ=32 ArqSz=0 Cal=0 SBA+ AGP+ GART64- 64bit- FW- Rate=x8 Capabilities: [50] Power Management version 2 Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 PME-Enable- DSel=0 DScale=0 PME- 00: 02 10 60 59 07 01 b0 02 01 00 00 03 10 40 80 00 10: 08 00 00 e8 01 e0 00 00 00 00 e0 fb 00 00 00 00 20: 00 00 00 00 00 00 00 00 00 00 00 00 af 17 20 20 30: 00 00 d0 fb 58 00 00 00 00 00 00 00 0b 01 08 00 40: 00 00 00 00 00 00 00 00 00 00 00 00 af 17 20 20 50: 01 00 02 06 00 00 00 00 02 50 30 00 1b 02 00 ff 60: 02 03 00 1f 00 00 00 00 00 00 00 00 00 00 00 00 70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 80: 05 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 01:00.1 Display controller [0380]: ATI Technologies Inc RV280 [Radeon 9200 PRO] (Secondary) [1002:5940] (rev 01) Subsystem: Hightech Information System Ltd. Unknown device [17af:2021] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 64 (2000ns min), Cache Line Size: 64 bytes Region 0: Memory at f0000000 (32-bit, prefetchable) [size=128M] Region 1: Memory at fbf00000 (32-bit, non-prefetchable) [size=64K] Capabilities: [50] Power Management version 2 Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 PME-Enable- DSel=0 DScale=0 PME- 00: 02 10 40 59 07 00 b0 02 01 00 80 03 10 40 00 00 10: 08 00 00 f0 00 00 f0 fb 00 00 00 00 00 00 00 00 20: 00 00 00 00 00 00 00 00 00 00 00 00 af 17 21 20 30: 00 00 00 00 50 00 00 00 00 00 00 00 ff 00 08 00 40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 50: 01 00 02 06 00 00 00 00 02 50 30 00 1b 02 00 ff 60: 00 02 00 00 00 00 00 00 00 00 00 00 00 00 00 00 70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [-- Attachment #3: dmesg --] [-- Type: text/plain, Size: 14440 bytes --] Linux version 2.6.20-g0670afdf (root@gentoox2.trippelsdorf.de) (gcc version 4.1.1 (Gentoo 4.1.1-r3)) #56 SMP Wed Feb 7 15:10:00 CET 2007 Command line: root=/dev/sda1 BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) BIOS-e820: 00000000000e4000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 000000007ffb0000 (usable) BIOS-e820: 000000007ffb0000 - 000000007ffc0000 (ACPI data) BIOS-e820: 000000007ffc0000 - 000000007fff0000 (ACPI NVS) BIOS-e820: 000000007fff0000 - 0000000080000000 (reserved) BIOS-e820: 00000000ff780000 - 0000000100000000 (reserved) Entering add_active_range(0, 0, 159) 0 entries of 256 used Entering add_active_range(0, 256, 524208) 1 entries of 256 used end_pfn_map = 1048576 DMI 2.3 present. ACPI: RSDP (v002 ACPIAM ) @ 0x00000000000fa7c0 ACPI: XSDT (v001 A M I OEMXSDT 0x11000514 MSFT 0x00000097) @ 0x000000007ffb0100 ACPI: FADT (v003 A M I OEMFACP 0x11000514 MSFT 0x00000097) @ 0x000000007ffb0290 ACPI: MADT (v001 A M I OEMAPIC 0x11000514 MSFT 0x00000097) @ 0x000000007ffb0390 ACPI: OEMB (v001 A M I OEMBIOS 0x11000514 MSFT 0x00000097) @ 0x000000007ffc0040 ACPI: DSDT (v001 A0036 A0036001 0x00000001 MSFT 0x0100000d) @ 0x0000000000000000 Entering add_active_range(0, 0, 159) 0 entries of 256 used Entering add_active_range(0, 256, 524208) 1 entries of 256 used Zone PFN ranges: DMA 0 -> 4096 DMA32 4096 -> 1048576 Normal 1048576 -> 1048576 early_node_map[2] active PFN ranges 0: 0 -> 159 0: 256 -> 524208 On node 0 totalpages: 524111 DMA zone: 56 pages used for memmap DMA zone: 1123 pages reserved DMA zone: 2820 pages, LIFO batch:0 DMA32 zone: 7110 pages used for memmap DMA32 zone: 513002 pages, LIFO batch:31 Normal zone: 0 pages used for memmap ACPI: PM-Timer IO Port: 0x808 ACPI: Local APIC address 0xfee00000 ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) Processor #0 (Bootup-CPU) ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled) Processor #1 ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) IOAPIC[0]: apic_id 2, address 0xfec00000, GSI 0-23 ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) ACPI: IRQ0 used by override. ACPI: IRQ2 used by override. ACPI: IRQ9 used by override. Setting APIC routing to flat Using ACPI (MADT) for SMP configuration information Nosave address range: 000000000009f000 - 00000000000a0000 Nosave address range: 00000000000a0000 - 00000000000e4000 Nosave address range: 00000000000e4000 - 0000000000100000 Allocating PCI resources starting at 88000000 (gap: 80000000:7f780000) PERCPU: Allocating 23488 bytes of per cpu data Built 1 zonelists. Total pages: 515822 Kernel command line: root=/dev/sda1 Initializing CPU#0 PID hash table entries: 4096 (order: 12, 32768 bytes) Console: colour VGA+ 80x25 Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes) Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes) Checking aperture... CPU 0: aperture @ d8000000 size 128 MB Memory: 2059760k/2096832k available (2786k kernel code, 36384k reserved, 1066k data, 220k init) Calibrating delay using timer specific routine.. 4805.05 BogoMIPS (lpj=2402528) Mount-cache hash table entries: 256 CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) CPU: L2 Cache: 512K (64 bytes/line) CPU: Physical Processor ID: 0 CPU: Processor Core ID: 0 Freeing SMP alternatives: 28k freed ACPI: Core revision 20060707 Using local APIC timer interrupts. result 15004525 Detected 15.004 MHz APIC timer. Booting processor 1/2 APIC 0x1 Initializing CPU#1 Calibrating delay using timer specific routine.. 4800.60 BogoMIPS (lpj=2400303) CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) CPU: L2 Cache: 512K (64 bytes/line) CPU: Physical Processor ID: 0 CPU: Processor Core ID: 1 AMD Athlon(tm) 64 X2 Dual Core Processor 3800+ stepping 01 CPU 1: Syncing TSC to CPU 0. CPU 1: synchronized TSC with CPU 0 (last diff 80 cycles, maxerr 411 cycles) Brought up 2 CPUs testing NMI watchdog ... OK. Disabling vsyscall due to use of PM timer time.c: Using 3.579545 MHz WALL PM GTOD PM timer. time.c: Detected 2400.721 MHz processor. migration_cost=199 NET: Registered protocol family 16 ACPI: bus type pci registered PCI: Using configuration type 1 ACPI: Interpreter enabled ACPI: Using IOAPIC for interrupt routing ACPI: PCI Root Bridge [PCI0] (0000:00) PCI: Probing PCI hardware (bus 00) PCI: enabled onboard AC97/MC97 devices Boot video device is 0000:01:00.0 ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 10 *11 14 15) ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 *10 11 14 15) ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 7 10 11 14 15) ACPI: PCI Interrupt Link [LNKD] (IRQs *3 4 5 7 10 11 14 15) ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 10 11 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 10 11 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 7 10 11 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 7 10 11 14 15) *0, disabled. SCSI subsystem initialized libata version 2.00 loaded. usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb PCI: Using ACPI for IRQ routing PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report PCI: Cannot allocate resource region 0 of device 0000:00:00.0 agpgart: Detected AGP bridge 0 agpgart: AGP aperture is 128M @ 0xd8000000 PCI: Bridge: 0000:00:01.0 IO window: e000-efff MEM window: fbd00000-fbffffff PREFETCH window: e8000000-faffffff PCI: Setting latency timer of device 0000:00:01.0 to 64 NET: Registered protocol family 2 IP route cache hash table entries: 65536 (order: 7, 524288 bytes) TCP established hash table entries: 262144 (order: 10, 4194304 bytes) TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) TCP: Hash tables configured (established 262144 bind 65536) TCP reno registered io scheduler noop registered io scheduler anticipatory registered io scheduler deadline registered io scheduler cfq registered (default) ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 16 radeonfb: Found Intel x86 BIOS ROM Image radeonfb: Retrieved PLL infos from BIOS radeonfb: Reference=27.00 MHz (RefDiv=12) Memory=240.00 Mhz, System=166.00 MHz radeonfb: PLL min 20000 max 40000 i2c_adapter i2c-2: unable to read EDID block. i2c_adapter i2c-2: unable to read EDID block. i2c_adapter i2c-2: unable to read EDID block. i2c_adapter i2c-3: unable to read EDID block. i2c_adapter i2c-3: unable to read EDID block. i2c_adapter i2c-3: unable to read EDID block. radeonfb: Monitor 1 type DFP found radeonfb: EDID probed radeonfb: Monitor 2 type no found Console: switching to colour frame buffer device 210x65 radeonfb (0000:01:00.0): ATI Radeon Y` input: Power Button (FF) as /class/input/input0 ACPI: Power Button (FF) [PWRF] input: Power Button (CM) as /class/input/input1 ACPI: Power Button (CM) [PWRB] input: Sleep Button (CM) as /class/input/input2 ACPI: Sleep Button (CM) [SLPB] Real Time Clock Driver v1.12ac Software Watchdog Timer: 0.07 initialized. soft_noboot=0 soft_margin=60 sec (nowayout= 0) Linux agpgart interface v0.101 (c) Dave Jones [drm] Initialized drm 1.1.0 20060810 [drm] Initialized radeon 1.25.0 20060524 on minor 0 Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing disabled serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A loop: loaded (max 8 devices) r8169 Gigabit Ethernet driver 2.2LK loaded ACPI: PCI Interrupt 0000:00:0e.0[A] -> GSI 19 (level, low) -> IRQ 19 eth0: RTL8169s/8110s at 0xffffc20000004000, 00:08:54:36:f2:2f, IRQ 19 Linux video capture interface: v2.00 bttv: driver version 0.9.16 loaded bttv: using 8 buffers with 2080k (520 pages) each for capture bttv: Bt8xx card found (0). ACPI: PCI Interrupt 0000:00:0c.0[A] -> GSI 17 (level, low) -> IRQ 17 bttv0: Bt878 (rev 17) at 0000:00:0c.0, irq: 17, latency: 64, mmio: 0xe7e00000 bttv0: detected: Pinnacle PCTV [card=39], PCI subsystem ID is 11bd:0012 bttv0: using: Pinnacle PCTV Studio/Rave [card=39,autodetected] bttv0: gpio: en=00000000, out=00000000 in=00ffffff [init] bttv0: i2c: checking for MSP34xx @ 0x80... not found bttv0: pinnacle/mt: id=1 info="PAL / mono" radio=no bttv0: using tuner=33 bttv0: registered device video0 bttv0: registered device vbi0 bttv0: PLL: 28636363 => 35468950 .. ok tuner 4-0043: chip found @ 0x86 (bt878 #0 [sw]) tda9887 4-0043: tda988[5/6/7] found @ 0x43 (tuner) tuner 4-0060: Chip ID is not zero. It is not a TEA5767 tuner 4-0060: chip found @ 0xc0 (bt878 #0 [sw]) tuner 4-0060: microtune: companycode=4d54 part=04 rev=04 tuner 4-0060: microtune MT2032 found, OK tuner 4-0060: microtune: companycode=4d54 part=04 rev=04 tuner 4-0060: microtune MT2032 found, OK sata_via 0000:00:0f.0: version 2.0 ACPI: PCI Interrupt 0000:00:0f.0[B] -> GSI 20 (level, low) -> IRQ 20 sata_via 0000:00:0f.0: routed to hard irq line 10 ata1: SATA max UDMA/133 cmd 0xC800 ctl 0xC402 bmdma 0xB400 irq 20 ata2: SATA max UDMA/133 cmd 0xC000 ctl 0xB802 bmdma 0xB408 irq 20 scsi0 : sata_via ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300) ATA: abnormal status 0x7F on port 0xC807 ATA: abnormal status 0x7F on port 0xC807 ata1.00: ATA-7, max UDMA7, 781422768 sectors: LBA48 NCQ (depth 0/32) ata1.00: ata1: dev 0 multi count 16 ata1.00: configured for UDMA/133 scsi1 : sata_via ata2: SATA link down 1.5 Gbps (SStatus 0 SControl 300) ATA: abnormal status 0x7F on port 0xC007 scsi 0:0:0:0: Direct-Access ATA SAMSUNG HD401LJ ZZ10 PQ: 0 ANSI: 5 SCSI device sda: 781422768 512-byte hdwr sectors (400088 MB) sda: Write Protect is off sda: Mode Sense: 00 3a 00 00 SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA SCSI device sda: 781422768 512-byte hdwr sectors (400088 MB) sda: Write Protect is off sda: Mode Sense: 00 3a 00 00 SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA sda: sda1 sda2 sda3 sda4 sd 0:0:0:0: Attached scsi disk sda sd 0:0:0:0: Attached scsi generic sg0 type 0 pata_via 0000:00:0f.1: version 0.2.1 ACPI: PCI Interrupt 0000:00:0f.1[A] -> GSI 20 (level, low) -> IRQ 20 ata3: PATA max UDMA/133 cmd 0x1F0 ctl 0x3F6 bmdma 0xFC00 irq 14 ata4: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xFC08 irq 15 scsi2 : pata_via ATA: abnormal status 0x8 on port 0x1F7 scsi3 : pata_via ata4.00: ATAPI, max UDMA/66 ata4.00: configured for UDMA/66 scsi 3:0:0:0: CD-ROM LITE-ON DVDRW SHW-16H5S LS0R PQ: 0 ANSI: 5 sr0: scsi3-mmc drive: 48x/48x writer cd/rw xa/form2 cdda tray Uniform CD-ROM driver Revision: 3.20 sr 3:0:0:0: Attached scsi CD-ROM sr0 sr 3:0:0:0: Attached scsi generic sg1 type 5 ACPI: PCI Interrupt 0000:00:10.4[C] -> GSI 21 (level, low) -> IRQ 21 ehci_hcd 0000:00:10.4: EHCI Host Controller ehci_hcd 0000:00:10.4: new USB bus registered, assigned bus number 1 ehci_hcd 0000:00:10.4: irq 21, io mem 0xfbc00000 ehci_hcd 0000:00:10.4: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 usb usb1: configuration #1 chosen from 1 choice hub 1-0:1.0: USB hub found hub 1-0:1.0: 4 ports detected ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI) USB Universal Host Controller Interface driver v3.0 ACPI: PCI Interrupt 0000:00:10.0[A] -> GSI 21 (level, low) -> IRQ 21 uhci_hcd 0000:00:10.0: UHCI Host Controller uhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 2 uhci_hcd 0000:00:10.0: irq 21, io base 0x0000d000 usb usb2: configuration #1 chosen from 1 choice hub 2-0:1.0: USB hub found hub 2-0:1.0: 2 ports detected ACPI: PCI Interrupt 0000:00:10.1[A] -> GSI 21 (level, low) -> IRQ 21 uhci_hcd 0000:00:10.1: UHCI Host Controller uhci_hcd 0000:00:10.1: new USB bus registered, assigned bus number 3 uhci_hcd 0000:00:10.1: irq 21, io base 0x0000d400 usb usb3: configuration #1 chosen from 1 choice hub 3-0:1.0: USB hub found hub 3-0:1.0: 2 ports detected usb 2-1: new low speed USB device using uhci_hcd and address 2 usb 2-1: configuration #1 chosen from 1 choice usb 3-1: new low speed USB device using uhci_hcd and address 2 usb 3-1: configuration #1 chosen from 1 choice usbcore: registered new interface driver usblp drivers/usb/class/usblp.c: v0.13: USB Printer Device Class driver input: HID 046a:0021 as /class/input/input3 input: USB HID v1.11 Keyboard [HID 046a:0021] on usb-0000:00:10.0-1 input: HID 046a:0021 as /class/input/input4 input: USB HID v1.11 Device [HID 046a:0021] on usb-0000:00:10.0-1 input: Logitech USB-PS/2 Optical Mouse as /class/input/input5 input: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:00:10.1-1 usbcore: registered new interface driver usbhid drivers/usb/input/hid-core.c: v2.6:USB HID core driver serio: i8042 KBD port at 0x60,0x64 irq 1 serio: i8042 AUX port at 0x60,0x64 irq 12 mice: PS/2 mouse device common for all mice i2c /dev entries driver w83627hf 9191-0290: Reading VID from GPIO5 Advanced Linux Sound Architecture Driver Version 1.0.14rc1 (Tue Jan 09 09:56:17 2007 UTC). ACPI: PCI Interrupt 0000:00:11.5[C] -> GSI 22 (level, low) -> IRQ 22 PCI: Setting latency timer of device 0000:00:11.5 to 64 ALSA device list: #0: VIA 8237 with ALC850 at 0xd800, irq 22 TCP cubic registered NET: Registered protocol family 1 NET: Registered protocol family 17 kjournald starting. Commit interval 5 seconds EXT3-fs: mounted filesystem with ordered data mode. VFS: Mounted root (ext3 filesystem) readonly. Freeing unused kernel memory: 220k freed EXT3 FS on sda1, internal journal kjournald starting. Commit interval 5 seconds EXT3 FS on sda4, internal journal EXT3-fs: mounted filesystem with ordered data mode. Adding 1959920k swap on /dev/sda2. Priority:-1 extents:1 across:1959920k r8169: eth0: link up agpgart: Found an AGP 3.0 compliant device at 0000:00:00.0. agpgart: Putting AGP V3 device at 0000:00:00.0 into 8x mode agpgart: Putting AGP V3 device at 0000:01:00.0 into 8x mode [drm] Setting GART location based on new memory map [drm] Loading R200 Microcode [drm] writeback test succeeded in 1 usecs agpgart: Found an AGP 3.0 compliant device at 0000:00:00.0. agpgart: Putting AGP V3 device at 0000:00:00.0 into 8x mode agpgart: Putting AGP V3 device at 0000:01:00.0 into 8x mode [drm] Setting GART location based on new memory map [drm] Loading R200 Microcode [drm] writeback test succeeded in 1 usecs ^ permalink raw reply [flat|nested] 12+ messages in thread
* [PATCH] sata_via: fix resource-managed iomap conversion 2007-02-12 2:58 ` Markus Trippelsdorf @ 2007-02-12 18:51 ` Tejun Heo 2007-02-12 19:33 ` Markus Trippelsdorf 2007-02-20 11:01 ` Tejun Heo 0 siblings, 2 replies; 12+ messages in thread From: Tejun Heo @ 2007-02-12 18:51 UTC (permalink / raw) To: Markus Trippelsdorf; +Cc: Jeff Garzik, linux-ide, LKML Conversion to resource-managed iomap was buggy causing init failures on both vt6420 and 6421 - BAR5 wasn't mapped for both controllers while on vt6420 sata_via tried to map BAR0-4 twice. Fix it. DO NOT APPLY YET. --- Markus, does this fix your problem? diff --git a/drivers/ata/sata_via.c b/drivers/ata/sata_via.c index baca6d7..fe9101a 100644 --- a/drivers/ata/sata_via.c +++ b/drivers/ata/sata_via.c @@ -423,16 +423,21 @@ static struct ata_probe_ent *vt6420_init_probe_ent(struct pci_dev *pdev) { struct ata_probe_ent *probe_ent; struct ata_port_info *ppi[2]; - void __iomem * const *iomap; + void __iomem *bar5; ppi[0] = ppi[1] = &vt6420_port_info; probe_ent = ata_pci_init_native_mode(pdev, ppi, ATA_PORT_PRIMARY | ATA_PORT_SECONDARY); if (!probe_ent) return NULL; - iomap = pcim_iomap_table(pdev); - probe_ent->port[0].scr_addr = svia_scr_addr(iomap[5], 0); - probe_ent->port[1].scr_addr = svia_scr_addr(iomap[5], 1); + bar5 = pcim_iomap(pdev, 5, 0); + if (!bar5) { + dev_printk(KERN_ERR, &pdev->dev, "failed to iomap PCI BAR 5\n"); + return NULL; + } + + probe_ent->port[0].scr_addr = svia_scr_addr(bar5, 0); + probe_ent->port[1].scr_addr = svia_scr_addr(bar5, 1); return probe_ent; } @@ -460,6 +465,13 @@ static struct ata_probe_ent *vt6421_init_probe_ent(struct pci_dev *pdev) probe_ent->mwdma_mask = 0x07; probe_ent->udma_mask = 0x7f; + for (i = 0; i < 6; i++) + if (!pcim_iomap(pdev, i, 0)) { + dev_printk(KERN_ERR, &pdev->dev, + "failed to iomap PCI BAR %d\n", i); + return NULL; + } + for (i = 0; i < N_PORTS; i++) vt6421_init_addrs(probe_ent, pcim_iomap_table(pdev), i); @@ -522,7 +534,7 @@ static int svia_init_one (struct pci_dev *pdev, const struct pci_device_id *ent) if (rc) return rc; - rc = pcim_iomap_regions(pdev, 0x1f, DRV_NAME); + rc = pci_request_regions(pdev, DRV_NAME); if (rc) { pcim_pin_device(pdev); return rc; ^ permalink raw reply related [flat|nested] 12+ messages in thread
* Re: [PATCH] sata_via: fix resource-managed iomap conversion 2007-02-12 18:51 ` [PATCH] sata_via: fix resource-managed iomap conversion Tejun Heo @ 2007-02-12 19:33 ` Markus Trippelsdorf 2007-02-12 20:10 ` Tejun Heo 2007-02-20 11:01 ` Tejun Heo 1 sibling, 1 reply; 12+ messages in thread From: Markus Trippelsdorf @ 2007-02-12 19:33 UTC (permalink / raw) To: Tejun Heo; +Cc: Jeff Garzik, linux-ide, LKML On Mon, Feb 12, 2007 at 10:51:44AM -0800, Tejun Heo wrote: > Conversion to resource-managed iomap was buggy causing init failures > on both vt6420 and 6421 - BAR5 wasn't mapped for both controllers > while on vt6420 sata_via tried to map BAR0-4 twice. Fix it. > > DO NOT APPLY YET. > --- > Markus, does this fix your problem? Yes it does. Thank you very much. I appreciate your work. -- Markus ^ permalink raw reply [flat|nested] 12+ messages in thread
* Re: [PATCH] sata_via: fix resource-managed iomap conversion 2007-02-12 19:33 ` Markus Trippelsdorf @ 2007-02-12 20:10 ` Tejun Heo 2007-02-15 11:29 ` Jarek Poplawski 2007-02-17 18:12 ` Jay Cliburn 0 siblings, 2 replies; 12+ messages in thread From: Tejun Heo @ 2007-02-12 20:10 UTC (permalink / raw) To: Markus Trippelsdorf; +Cc: Jeff Garzik, linux-ide, LKML Markus Trippelsdorf wrote: > On Mon, Feb 12, 2007 at 10:51:44AM -0800, Tejun Heo wrote: >> Conversion to resource-managed iomap was buggy causing init failures >> on both vt6420 and 6421 - BAR5 wasn't mapped for both controllers >> while on vt6420 sata_via tried to map BAR0-4 twice. Fix it. Great, can anyone verify this on vt6421? -- tejun ^ permalink raw reply [flat|nested] 12+ messages in thread
* Re: [PATCH] sata_via: fix resource-managed iomap conversion 2007-02-12 20:10 ` Tejun Heo @ 2007-02-15 11:29 ` Jarek Poplawski 2007-02-17 18:12 ` Jay Cliburn 1 sibling, 0 replies; 12+ messages in thread From: Jarek Poplawski @ 2007-02-15 11:29 UTC (permalink / raw) To: Tejun Heo; +Cc: Markus Trippelsdorf, Jeff Garzik, linux-ide, LKML On 12-02-2007 21:10, Tejun Heo wrote: > Markus Trippelsdorf wrote: >> On Mon, Feb 12, 2007 at 10:51:44AM -0800, Tejun Heo wrote: >>> Conversion to resource-managed iomap was buggy causing init failures >>> on both vt6420 and 6421 - BAR5 wasn't mapped for both controllers >>> while on vt6420 sata_via tried to map BAR0-4 twice. Fix it. > > Great, can anyone verify this on vt6421? I'm sure they will. I can only confirm with vt6420 too and presume it can't be worse, so please apply. Thanks & regards, Jarek P. ^ permalink raw reply [flat|nested] 12+ messages in thread
* Re: [PATCH] sata_via: fix resource-managed iomap conversion 2007-02-12 20:10 ` Tejun Heo 2007-02-15 11:29 ` Jarek Poplawski @ 2007-02-17 18:12 ` Jay Cliburn 1 sibling, 0 replies; 12+ messages in thread From: Jay Cliburn @ 2007-02-17 18:12 UTC (permalink / raw) To: Tejun Heo; +Cc: Markus Trippelsdorf, Jeff Garzik, linux-ide, LKML [-- Attachment #1: Type: text/plain, Size: 645 bytes --] On Mon, 12 Feb 2007 12:10:08 -0800 Tejun Heo <htejun@gmail.com> wrote: > Markus Trippelsdorf wrote: > > On Mon, Feb 12, 2007 at 10:51:44AM -0800, Tejun Heo wrote: > >> Conversion to resource-managed iomap was buggy causing init > >> failures on both vt6420 and 6421 - BAR5 wasn't mapped for both > >> controllers while on vt6420 sata_via tried to map BAR0-4 twice. > >> Fix it. > > Great, can anyone verify this on vt6421? > Tejun, I've verified your patch works on a vt8237a (1106:0591). Kernel 2.6.20-git10 (Fedora rawhide kernel-2.6.20-1.2932.fc7) would not boot without the patch. Dmesg and lspci attached. Thanks for the patch. Jay [-- Attachment #2: dmesg-20070217.txt --] [-- Type: text/plain, Size: 20519 bytes --] Linux version 2.6.20-1.2932 (jcliburn@hawk.hogchain.net) (gcc version 4.1.2 20070214 (Red Hat 4.1.2-1)) #1 SMP Sat Feb 17 09:48:58 CST 2007 Command line: ro root=/dev/VolGroup00/LogVol00 console=ttyS0,38400 console=tty0 debug BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) BIOS-e820: 00000000000e4000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 000000003ffb0000 (usable) BIOS-e820: 000000003ffb0000 - 000000003ffbe000 (ACPI data) BIOS-e820: 000000003ffbe000 - 000000003ffe0000 (ACPI NVS) BIOS-e820: 000000003ffe0000 - 0000000040000000 (reserved) BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved) BIOS-e820: 00000000fecc0000 - 00000000fecc1000 (reserved) BIOS-e820: 00000000ff780000 - 0000000100000000 (reserved) Entering add_active_range(0, 0, 159) 0 entries of 3200 used Entering add_active_range(0, 256, 262064) 1 entries of 3200 used end_pfn_map = 1048576 DMI present. ACPI: RSDP 000FA960, 0014 (r0 ACPIAM) ACPI: RSDT 3FFB0000, 0038 (r1 A M I OEMRSDT 7000611 MSFT 97) ACPI: FACP 3FFB0200, 0084 (r2 A M I OEMFACP 7000611 MSFT 97) ACPI: DSDT 3FFB0440, 4CCB (r1 A0498 A0498000 0 INTL 20060113) ACPI: FACS 3FFBE000, 0040 ACPI: APIC 3FFB0390, 0068 (r1 A M I OEMAPIC 7000611 MSFT 97) ACPI: MCFG 3FFB0400, 003C (r1 A M I OEMMCFG 7000611 MSFT 97) ACPI: OEMB 3FFBE040, 0060 (r1 A M I AMI_OEM 7000611 MSFT 97) ACPI: SSDT 3FFB5110, 01C4 (r1 A M I POWERNOW 1 AMD 1) Scanning NUMA topology in Northbridge 24 Number of nodes 1 Node 0 MemBase 0000000000000000 Limit 000000003ffb0000 Entering add_active_range(0, 0, 159) 0 entries of 3200 used Entering add_active_range(0, 256, 262064) 1 entries of 3200 used NUMA: Using 63 for the hash shift. Using node hash shift of 63 Bootmem setup node 0 0000000000000000-000000003ffb0000 Zone PFN ranges: DMA 0 -> 4096 DMA32 4096 -> 1048576 Normal 1048576 -> 1048576 early_node_map[2] active PFN ranges 0: 0 -> 159 0: 256 -> 262064 On node 0 totalpages: 261967 DMA zone: 88 pages used for memmap DMA zone: 2316 pages reserved DMA zone: 1595 pages, LIFO batch:0 DMA32 zone: 5542 pages used for memmap DMA32 zone: 252426 pages, LIFO batch:31 Normal zone: 0 pages used for memmap ACPI: PM-Timer IO Port: 0x808 ACPI: Local APIC address 0xfee00000 ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) Processor #0 (Bootup-CPU) ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled) Processor #1 ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) IOAPIC[0]: apic_id 2, address 0xfec00000, GSI 0-23 ACPI: IOAPIC (id[0x03] address[0xfecc0000] gsi_base[24]) IOAPIC[1]: apic_id 3, address 0xfecc0000, GSI 24-47 ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level) ACPI: IRQ0 used by override. ACPI: IRQ2 used by override. ACPI: IRQ9 used by override. Setting APIC routing to physical flat Using ACPI (MADT) for SMP configuration information Nosave address range: 000000000009f000 - 00000000000a0000 Nosave address range: 00000000000a0000 - 00000000000e4000 Nosave address range: 00000000000e4000 - 0000000000100000 Allocating PCI resources starting at 50000000 (gap: 40000000:bec00000) SMP: Allowing 2 CPUs, 0 hotplug CPUs PERCPU: Allocating 44416 bytes of per cpu data Built 1 zonelists. Total pages: 254021 Kernel command line: ro root=/dev/VolGroup00/LogVol00 console=ttyS0,38400 console=tty0 debug Initializing CPU#0 PID hash table entries: 4096 (order: 12, 32768 bytes) Console: colour VGA+ 80x25 Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar ... MAX_LOCKDEP_SUBCLASSES: 8 ... MAX_LOCK_DEPTH: 30 ... MAX_LOCKDEP_KEYS: 2048 ... CLASSHASH_SIZE: 1024 ... MAX_LOCKDEP_ENTRIES: 8192 ... MAX_LOCKDEP_CHAINS: 16384 ... CHAINHASH_SIZE: 8192 memory used by lock dependency info: 1648 kB per task-struct memory footprint: 1680 bytes Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes) Inode-cache hash table entries: 65536 (order: 7, 524288 bytes) Checking aperture... CPU 0: aperture @ 1046000000 size 32 MB Aperture too small (32 MB) No AGP bridge found Memory: 1010552k/1048256k available (2447k kernel code, 37316k reserved, 1426k data, 328k init) Calibrating delay using timer specific routine.. 4001.02 BogoMIPS (lpj=2000514) Security Framework v1.0.0 initialized SELinux: Initializing. SELinux: Starting in permissive mode selinux_register_security: Registering secondary module capability Capability LSM initialized as secondary Mount-cache hash table entries: 256 CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) CPU: L2 Cache: 512K (64 bytes/line) CPU 0/0 -> Node 0 CPU: Physical Processor ID: 0 CPU: Processor Core ID: 0 lockdep: not fixing up alternatives. ACPI: Core revision 20070126 Using local APIC timer interrupts. result 12498862 Detected 12.498 MHz APIC timer. lockdep: not fixing up alternatives. Booting processor 1/2 APIC 0x1 Initializing CPU#1 Calibrating delay using timer specific routine.. 3998.98 BogoMIPS (lpj=1999493) CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) CPU: L2 Cache: 512K (64 bytes/line) CPU 1/1 -> Node 0 CPU: Physical Processor ID: 0 CPU: Processor Core ID: 1 AMD Athlon(tm) 64 X2 Dual Core Processor 3800+ stepping 02 CPU 1: Syncing TSC to CPU 0. CPU 1: synchronized TSC with CPU 0 (last diff 1 cycles, maxerr 491 cycles) Brought up 2 CPUs Disabling vsyscall due to use of PM timer time.c: Using 3.579545 MHz WALL PM GTOD PM timer. time.c: Detected 1999.818 MHz processor. sizeof(vma)=176 bytes sizeof(page)=88 bytes sizeof(inode)=1008 bytes sizeof(dentry)=248 bytes sizeof(ext3inode)=1376 bytes sizeof(buffer_head)=104 bytes sizeof(skbuff)=248 bytes sizeof(task_struct)=3776 bytes migration_cost=351 NET: Registered protocol family 16 ACPI: bus type pci registered PCI: BIOS Bug: MCFG area at e0000000 is not E820-reserved PCI: Not using MMCONFIG. PCI: Using configuration type 1 ACPI: Interpreter enabled ACPI: Using IOAPIC for interrupt routing Error attaching device data Error attaching device data ACPI: PCI Root Bridge [PCI0] (0000:00) PCI: Probing PCI hardware (bus 00) Boot video device is 0000:02:00.0 PCI: Transparent bridge - 0000:00:13.1 ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.NBPG._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.NBP0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.NBP1._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.NBP2._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.NBP3._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P7._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0PA._PRT] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15) ACPI: PCI Interrupt Link [LNKB] (IRQs<7>Losing some ticks... checking if CPU frequency changed. 3 4 5 6 7 *10 11 12 14 15) ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 6 7 10 11 12 14 15) ACPI: PCI Interrupt Link [LNKD] (IRQs *3 4 5 6 7 10 11 12 14 15) ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 10 *11 12 14 15) Linux Plug and Play Support v0.97 (c) Adam Belay pnp: PnP ACPI init pnp: PnP ACPI: found 16 devices usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb PCI: Using ACPI for IRQ routing PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report NetLabel: Initializing NetLabel: domain hash size = 128 NetLabel: protocols = UNLABELED CIPSOv4 NetLabel: unlabeled traffic allowed by default pnp: 00:07: ioport range 0xc00-0xc0f has been reserved pnp: 00:07: ioport range 0xd00-0xd0f has been reserved pnp: 00:07: ioport range 0xa20-0xa2f has been reserved pnp: 00:07: ioport range 0xa30-0xa3f has been reserved pnp: 00:0a: iomem range 0xfec00000-0xfec00fff has been reserved pnp: 00:0a: iomem range 0xfee00000-0xfee00fff has been reserved pnp: 00:0e: iomem range 0xe0000000-0xefffffff has been reserved pnp: 00:0f: iomem range 0x0-0x9ffff could not be reserved pnp: 00:0f: iomem range 0xc0000-0xcffff could not be reserved pnp: 00:0f: iomem range 0xe0000-0xfffff could not be reserved pnp: 00:0f: iomem range 0x100000-0x3fffffff could not be reserved PCI: Bridge: 0000:00:01.0 IO window: disabled. MEM window: disabled. PREFETCH window: disabled. PCI: Bridge: 0000:00:02.0 IO window: disabled. MEM window: f9000000-fbdfffff PREFETCH window: d0000000-dfffffff PCI: Bridge: 0000:00:03.0 IO window: disabled. MEM window: disabled. PREFETCH window: f7f00000-f7ffffff PCI: Bridge: 0000:00:03.1 IO window: disabled. MEM window: disabled. PREFETCH window: f7e00000-f7efffff PCI: Bridge: 0000:00:03.2 IO window: disabled. MEM window: fbe00000-fbefffff PREFETCH window: disabled. PCI: Bridge: 0000:00:03.3 IO window: disabled. MEM window: disabled. PREFETCH window: f7d00000-f7dfffff PCI: Bridge: 0000:00:13.0 IO window: disabled. MEM window: fbf00000-fbffffff PREFETCH window: disabled. PCI: Bridge: 0000:00:13.1 IO window: disabled. MEM window: disabled. PREFETCH window: disabled. PCI: Setting latency timer of device 0000:00:01.0 to 64 ACPI: PCI Interrupt 0000:00:02.0[A] -> GSI 27 (level, low) -> IRQ 27 PCI: Setting latency timer of device 0000:00:02.0 to 64 ACPI: PCI Interrupt 0000:00:03.0[A] -> GSI 31 (level, low) -> IRQ 31 PCI: Setting latency timer of device 0000:00:03.0 to 64 ACPI: PCI Interrupt 0000:00:03.1[B] -> GSI 35 (level, low) -> IRQ 35 PCI: Setting latency timer of device 0000:00:03.1 to 64 ACPI: PCI Interrupt 0000:00:03.2[C] -> GSI 39 (level, low) -> IRQ 39 PCI: Setting latency timer of device 0000:00:03.2 to 64 ACPI: PCI Interrupt 0000:00:03.3[D] -> GSI 43 (level, low) -> IRQ 43 PCI: Setting latency timer of device 0000:00:03.3 to 64 PCI: Setting latency timer of device 0000:00:13.0 to 64 PCI: Setting latency timer of device 0000:00:13.1 to 64 NET: Registered protocol family 2 IP route cache hash table entries: 32768 (order: 6, 262144 bytes) TCP established hash table entries: 65536 (order: 10, 4194304 bytes) TCP bind hash table entries: 65536 (order: 9, 3670016 bytes) TCP: Hash tables configured (established 65536 bind 65536) TCP reno registered checking if image is initramfs... it is Freeing initrd memory: 3698k freed audit: initializing netlink socket (disabled) audit(1171713241.877:1): initialized Total HugeTLB memory allocated, 0 VFS: Disk quotas dquot_6.5.1 Dquot-cache hash table entries: 512 (order 0, 4096 bytes) SELinux: Registering netfilter hooks ksign: Installing public key data Loading keyring - Added public key 87B885CDE4968314 - key was been created 13843 seconds in future - User ID: Red Hat, Inc. (Kernel Module GPG key) io scheduler noop registered io scheduler anticipatory registered io scheduler deadline registered io scheduler cfq registered (default) PCI: Setting latency timer of device 0000:00:02.0 to 64 assign_interrupt_mode Found MSI capability Allocate Port Service[0000:00:02.0:pcie00] Allocate Port Service[0000:00:02.0:pcie02] PCI: Setting latency timer of device 0000:00:03.0 to 64 assign_interrupt_mode Found MSI capability Allocate Port Service[0000:00:03.0:pcie00] Allocate Port Service[0000:00:03.0:pcie02] PCI: Setting latency timer of device 0000:00:03.1 to 64 assign_interrupt_mode Found MSI capability Allocate Port Service[0000:00:03.1:pcie00] Allocate Port Service[0000:00:03.1:pcie02] PCI: Setting latency timer of device 0000:00:03.2 to 64 assign_interrupt_mode Found MSI capability Allocate Port Service[0000:00:03.2:pcie00] Allocate Port Service[0000:00:03.2:pcie02] PCI: Setting latency timer of device 0000:00:03.3 to 64 assign_interrupt_mode Found MSI capability Allocate Port Service[0000:00:03.3:pcie00] Allocate Port Service[0000:00:03.3:pcie02] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 ACPI: Processor [P001] (supports 16 throttling states) Real Time Clock Driver v1.12ac Non-volatile memory driver v1.2 Linux agpgart interface v0.101 (c) Dave Jones Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A 00:0b: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A RAMDISK driver initialized: 16 RAM disks of 16384K size 4096 blocksize input: Macintosh mouse button emulation as /class/input/input0 usbcore: registered new interface driver libusual usbcore: registered new interface driver hiddev usbcore: registered new interface driver usbhid drivers/usb/input/hid-core.c: v2.6:USB HID core driver PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12 serio: i8042 KBD port at 0x60,0x64 irq 1 serio: i8042 AUX port at 0x60,0x64 irq 12 mice: PS/2 mouse device common for all mice input: AT Translated Set 2 keyboard as /class/input/input1 TCP bic registered Initializing XFRM netlink socket NET: Registered protocol family 1 NET: Registered protocol family 17 powernow-k8: Found 2 AMD Athlon(tm) 64 X2 Dual Core Processor 3800+ processors (version 2.00.00) powernow-k8: 0 : fid 0xc (2000 MHz), vid 0x8 powernow-k8: 1 : fid 0xa (1800 MHz), vid 0xa powernow-k8: 2 : fid 0x2 (1000 MHz), vid 0x12 ACPI: (supports S0 S1 S3 S4 S5) Freeing unused kernel memory: 328k freed Write protecting the kernel read-only data: 1043k USB Universal Host Controller Interface driver v3.0 ACPI: PCI Interrupt 0000:00:10.0[A] -> GSI 20 (level, low) -> IRQ 20 uhci_hcd 0000:00:10.0: UHCI Host Controller uhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 1 uhci_hcd 0000:00:10.0: irq 20, io base 0x0000d480 usb usb1: configuration #1 chosen from 1 choice hub 1-0:1.0: USB hub found hub 1-0:1.0: 2 ports detected ACPI: PCI Interrupt 0000:00:10.1[B] -> GSI 22 (level, low) -> IRQ 22 uhci_hcd 0000:00:10.1: UHCI Host Controller uhci_hcd 0000:00:10.1: new USB bus registered, assigned bus number 2 uhci_hcd 0000:00:10.1: irq 22, io base 0x0000d800 usb usb2: configuration #1 chosen from 1 choice hub 2-0:1.0: USB hub found hub 2-0:1.0: 2 ports detected ACPI: PCI Interrupt 0000:00:10.2[C] -> GSI 21 (level, low) -> IRQ 21 uhci_hcd 0000:00:10.2: UHCI Host Controller uhci_hcd 0000:00:10.2: new USB bus registered, assigned bus number 3 uhci_hcd 0000:00:10.2: irq 21, io base 0x0000d880 usb usb3: configuration #1 chosen from 1 choice hub 3-0:1.0: USB hub found hub 3-0:1.0: 2 ports detected ACPI: PCI Interrupt 0000:00:10.3[D] -> GSI 23 (level, low) -> IRQ 23 uhci_hcd 0000:00:10.3: UHCI Host Controller uhci_hcd 0000:00:10.3: new USB bus registered, assigned bus number 4 uhci_hcd 0000:00:10.3: irq 23, io base 0x0000dc00 usb usb4: configuration #1 chosen from 1 choice usb 2-1: new low speed USB device using uhci_hcd and address 2 hub 4-0:1.0: USB hub found hub 4-0:1.0: 2 ports detected ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver ACPI: PCI Interrupt 0000:00:10.4[C] -> GSI 21 (level, low) -> IRQ 21 ehci_hcd 0000:00:10.4: EHCI Host Controller usb 2-1: configuration #1 chosen from 1 choice input: Microsoft Basic Optical Mouse as /class/input/input2 input: USB HID v1.10 Mouse [Microsoft Basic Optical Mouse] on usb-0000:00:10.1-1 ehci_hcd 0000:00:10.4: new USB bus registered, assigned bus number 5 ehci_hcd 0000:00:10.4: irq 21, io mem 0xf8fffc00 ehci_hcd 0000:00:10.4: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 usb usb5: configuration #1 chosen from 1 choice hub 5-0:1.0: USB hub found hub 5-0:1.0: 8 ports detected SCSI subsystem initialized libata version 2.10 loaded. sata_via 0000:00:0f.0: version 2.0 usb 2-1: USB disconnect, address 2 ACPI: PCI Interrupt 0000:00:0f.0[B] -> GSI 21 (level, low) -> IRQ 21 sata_via 0000:00:0f.0: routed to hard irq line 10 ata1: SATA max UDMA/133 cmd 0x000000000001ec00 ctl 0x000000000001e882 bmdma 0x000000000001e400 irq 21 ata2: SATA max UDMA/133 cmd 0x000000000001e800 ctl 0x000000000001e482 bmdma 0x000000000001e408 irq 21 scsi0 : sata_via ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300) ATA: abnormal status 0x7F on port 0x000000000001ec07 ATA: abnormal status 0x7F on port 0x000000000001ec07 ata1.00: ATA-7: WDC WD2500KS-00MJB0, 02.01C03, max UDMA/133 ata1.00: 488397168 sectors, multi 16: LBA48 ata1.00: configured for UDMA/133 scsi1 : sata_via usb 2-1: new low speed USB device using uhci_hcd and address 3 ata2: SATA link down 1.5 Gbps (SStatus 0 SControl 300) ATA: abnormal status 0x7F on port 0x000000000001e807 scsi 0:0:0:0: Direct-Access ATA WDC WD2500KS-00M 02.0 PQ: 0 ANSI: 5 SCSI device sda: 488397168 512-byte hdwr sectors (250059 MB) sda: Write Protect is off sda: Mode Sense: 00 3a 00 00 usb 2-1: configuration #1 chosen from 1 choice input: Microsoft Basic Optical Mouse as /class/input/input3 input: USB HID v1.10 Mouse [Microsoft Basic Optical Mouse] on usb-0000:00:10.1-1 SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA SCSI device sda: 488397168 512-byte hdwr sectors (250059 MB) sda: Write Protect is off sda: Mode Sense: 00 3a 00 00 SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA sda: sda1 sda2 sda3 sd 0:0:0:0: Attached scsi disk sda device-mapper: ioctl: 4.11.0-ioctl (2006-10-12) initialised: dm-devel@redhat.com kjournald starting. Commit interval 5 seconds EXT3-fs: mounted filesystem with ordered data mode. SELinux: Disabled at runtime. SELinux: Unregistering netfilter hooks audit(1171713248.186:2): selinux=0 auid=4294967295 sd 0:0:0:0: Attached scsi generic sg0 type 0 Floppy drive(s): fd0 is 1.44M FDC 0 is a post-1991 82077 shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 pata_via 0000:00:0f.1: version 0.2.1 ata3: PATA max UDMA/133 cmd 0x00000000000101f0 ctl 0x00000000000103f6 bmdma 0x000000000001fc00 irq 14 ata4: PATA max UDMA/133 cmd 0x0000000000010170 ctl 0x0000000000010376 bmdma 0x000000000001fc08 irq 15 scsi2 : pata_via ata3.00: ATAPI, max UDMA/33 ata3.00: configured for UDMA/33 scsi3 : pata_via EDAC MC: Ver: 2.0.1 Feb 17 2007 parport: PnPBIOS parport detected. parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE,EPP] input: PC Speaker as /class/input/input4 parport0: Printer, HEWLETT-PACKARD DESKJET 840C ATA: abnormal status 0x8 on port 0x0000000000010177 Attansic L1 Ethernet Network Driver - version 2.0.6 Copyright(c) 2005-2006 Attansic Corporation. scsi 2:0:0:0: CD-ROM _NEC DVD_RW ND-3550A 1.05 PQ: 0 ANSI: 5 scsi 2:0:0:0: Attached scsi generic sg1 type 5 ACPI: PCI Interrupt 0000:04:00.0[A] -> GSI 36 (level, low) -> IRQ 36 PCI: Setting latency timer of device 0000:04:00.0 to 64 EDAC MC0: Giving out device to k8_edac Athlon64/Opteron: DEV 0000:00:18.2 rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0 pnp: Device 00:02 does not support disabling. rtc_cmos: probe of 00:02 failed with error -16 sr0: scsi3-mmc drive: 48x/48x writer cd/rw xa/form2 cdda tray Uniform CD-ROM driver Revision: 3.20 sr 2:0:0:0: Attached scsi CD-ROM sr0 ACPI: PCI Interrupt 0000:08:01.0[A] -> GSI 17 (level, low) -> IRQ 17 PCI: Setting latency timer of device 0000:08:01.0 to 64 lp0: using parport0 (interrupt-driven). lp0: console ready No dock devices found. input: Power Button (FF) as /class/input/input5 ACPI: Power Button (FF) [PWRF] input: Sleep Button (CM) as /class/input/input6 ACPI: Sleep Button (CM) [SLPB] input: Power Button (CM) as /class/input/input7 ACPI: Power Button (CM) [PWRB] ibm_acpi: ec object not found md: Autodetecting RAID arrays. md: autorun ... md: ... autorun DONE. loop: loaded (max 8 devices) EXT3 FS on dm-0, internal journal kjournald starting. Commit interval 5 seconds EXT3 FS on sda2, internal journal EXT3-fs: mounted filesystem with ordered data mode. Adding 2031608k swap on /dev/VolGroup00/LogVol01. Priority:-1 extents:1 across:2031608k ip_tables: (C) 2000-2006 Netfilter Core Team Netfilter messages via NETLINK v0.30. nf_conntrack version 0.5.0 (4094 buckets, 32752 max) NET: Registered protocol family 10 lo: Disabled Privacy Extensions Mobile IPv6 process `sysctl' is using deprecated sysctl (syscall) net.ipv6.neigh.lo.retrans_time; Use net.ipv6.neigh.lo.retrans_time_ms instead. atl1: eth0 link is up 100 Mbps full duplex atl1: eth0 link is up 1000 Mbps full duplex eth0: no IPv6 routers present [-- Attachment #3: lspci-20070217.txt --] [-- Type: text/plain, Size: 49910 bytes --] 00:00.0 0600: 1106:0351 Subsystem: 1106:0351 Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 64, Cache Line Size: 64 bytes Capabilities: [50] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 PME-Enable- DSel=0 DScale=0 PME- Capabilities: [60] HyperTransport: Slave or Primary Interface !!! Possibly incomplete decoding Command: BaseUnitID=0 UnitCnt=3 MastHost- DefDir- Link Control 0: CFlE- CST- CFE- <LkFail- Init+ EOC- TXO- <CRCErr=0 Link Config 0: MLWI=16bit MLWO=16bit LWI=16bit LWO=16bit Link Control 1: CFlE- CST- CFE- <LkFail+ Init- EOC+ TXO+ <CRCErr=0 Link Config 1: MLWI=8bit MLWO=8bit LWI=8bit LWO=8bit Revision ID: 1.02 Capabilities: [58] #00 [0000] 00: 06 11 51 03 06 01 10 02 00 00 00 06 10 40 80 00 10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 20: 00 00 00 00 00 00 00 00 00 00 00 00 06 11 51 03 30: 00 00 00 00 50 00 00 00 00 00 00 00 00 00 00 00 40: 3f 63 08 00 00 00 00 00 00 00 1f c4 00 0c 00 01 50: 01 60 02 00 00 00 00 00 00 00 00 00 00 00 00 00 60: 08 58 60 00 20 00 11 11 d0 00 00 00 22 06 75 00 70: 02 00 00 00 00 00 00 00 00 00 00 00 08 00 00 00 80: 02 50 30 00 07 02 00 1f 00 00 00 00 28 00 00 00 90: 80 01 00 00 20 0f 01 00 00 00 00 00 00 00 00 00 a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 b0: 00 00 00 00 00 00 00 00 00 40 00 00 06 08 00 00 c0: 08 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 e0: 08 00 00 98 00 00 00 00 00 00 00 00 00 00 00 00 f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00:00.1 0600: 1106:1351 Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 0, Cache Line Size: 64 bytes 00: 06 11 51 13 06 00 00 02 00 00 00 06 10 00 00 00 10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00:00.2 0600: 1106:2351 Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 0, Cache Line Size: 64 bytes 00: 06 11 51 23 06 00 00 02 00 00 00 06 10 00 00 00 10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 a0: 03 8a 10 31 30 3c 80 86 7f cf 44 22 24 00 22 30 b0: 3f 13 c0 00 02 00 00 00 00 00 00 00 00 00 0e 00 c0: 20 aa 00 00 50 50 00 00 00 00 00 00 00 00 00 00 d0: 33 33 02 30 00 00 33 00 00 00 00 00 00 00 00 00 e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00:00.3 0600: 1106:3351 Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 0, Cache Line Size: 64 bytes 00: 06 11 51 33 06 00 00 02 00 00 00 06 10 00 00 00 10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 50: 22 22 00 00 00 00 e4 00 00 00 00 00 00 00 00 00 60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 80: aa 00 c0 20 00 ff 19 00 40 00 00 00 00 00 00 00 90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00:00.4 0600: 1106:4351 Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 0, Cache Line Size: 64 bytes 00: 06 11 51 43 06 00 00 02 00 00 00 06 10 00 00 00 10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 40: 40 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 a0: 00 00 ff 00 00 00 00 00 1f 00 04 40 00 10 00 00 b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00:00.5 0800: 1106:5351 (prog-if 20) Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 0, Cache Line Size: 64 bytes 00: 06 11 51 53 06 00 00 00 00 20 00 08 10 00 80 00 10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 40: 8c 00 05 00 02 40 c0 00 00 00 00 00 00 00 00 00 50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 60: 2b 0e 00 00 23 00 00 00 00 00 00 00 00 00 00 00 70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 80: 85 00 00 11 08 00 00 00 00 00 00 00 00 00 00 00 90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 a0: 40 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 f0: 7e 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00:00.6 0600: 1106:6238 Subsystem: 0008:0000 Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 0, Cache Line Size: 64 bytes 00: 06 11 38 62 06 00 00 02 00 00 00 06 10 00 00 00 10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 20: 00 00 00 00 00 00 00 00 00 00 00 00 08 00 00 00 30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00:00.7 0600: 1106:7351 Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 0, Cache Line Size: 64 bytes 00: 06 11 51 73 06 00 00 02 00 00 00 06 10 00 00 00 10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 40: 70 3b 88 82 82 44 00 30 00 00 00 00 00 00 00 00 50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 b0: 06 01 00 82 97 88 88 61 00 00 00 00 00 00 00 00 c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00:01.0 0604: 1106:b999 Control: I/O- Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 0, Cache Line Size: 64 bytes Bus: primary=00, secondary=01, subordinate=01, sec-latency=0 I/O behind bridge: 0000f000-00000fff Memory behind bridge: fff00000-000fffff Prefetchable memory behind bridge: fff00000-000fffff Secondary status: 66MHz+ FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- <SERR- <PERR- BridgeCtl: Parity+ SERR+ NoISA- VGA- MAbort- >Reset- FastB2B- Capabilities: [70] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 PME-Enable- DSel=0 DScale=0 PME- 00: 06 11 99 b9 04 00 30 02 00 00 04 06 10 00 01 00 10: 00 00 00 00 00 00 00 00 00 01 01 00 f0 00 20 02 20: f0 ff 00 00 f0 ff 00 00 00 00 00 00 00 00 00 00 30: 00 00 00 00 70 00 00 00 00 00 00 00 00 00 03 00 40: 91 40 00 44 31 3a 99 b9 00 00 00 00 00 00 00 00 50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 70: 01 00 02 00 00 00 00 00 00 00 00 00 00 00 00 00 80: 0e 70 35 00 07 02 00 1f 00 00 00 00 28 00 00 00 90: 80 00 00 00 00 08 01 00 00 00 00 00 00 00 00 00 a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 b0: bf 63 08 00 00 00 00 00 00 00 1f c4 00 04 00 00 c0: 08 00 0b ff 00 00 00 00 00 00 00 00 00 00 00 00 d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00:02.0 0604: 1106:a238 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 0, Cache Line Size: 64 bytes Bus: primary=00, secondary=02, subordinate=02, sec-latency=0 I/O behind bridge: 0000f000-00000fff Memory behind bridge: f9000000-fbdfffff Prefetchable memory behind bridge: 00000000d0000000-00000000dff00000 Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR- BridgeCtl: Parity- SERR- NoISA+ VGA+ MAbort- >Reset- FastB2B- Capabilities: [40] Express Root Port (Slot+) IRQ 0 Device: Supported: MaxPayload 256 bytes, PhantFunc 0, ExtTag- Device: Latency L0s <1us, L1 unlimited Device: Errors: Correctable+ Non-Fatal+ Fatal+ Unsupported+ Device: RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop- Device: MaxPayload 128 bytes, MaxReadReq 128 bytes Link: Supported Speed 2.5Gb/s, Width x16, ASPM L0s L1, Port 0 Link: Latency L0s <64ns, L1 <1us Link: ASPM Disabled RCB 64 bytes CommClk- ExtSynch- Link: Speed 2.5Gb/s, Width x16 Slot: AtnBtn- PwrCtrl- MRL- AtnInd- PwrInd- HotPlug+ Surpise+ Slot: Number 0, PowerLimit 0.000000 Slot: Enabled AtnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- Slot: AttnInd Unknown, PwrInd Unknown, Power- Root: Correctable- Non-Fatal- Fatal- PME- Capabilities: [68] Power Management version 2 Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+) Status: D0 PME-Enable- DSel=0 DScale=0 PME- Capabilities: [70] Message Signalled Interrupts: 64bit+ Queue=0/0 Enable+ Address: 00000000fee00000 Data: 4061 00: 06 11 38 a2 07 04 10 00 00 00 04 06 10 00 01 00 10: 00 00 00 00 00 00 00 00 00 02 02 00 f0 00 00 20 20: 00 f9 d0 fb 01 d0 f1 df 00 00 00 00 00 00 00 00 30: 00 00 00 00 40 00 00 00 00 00 00 00 0b 01 0c 00 40: 10 68 41 01 01 0f 00 00 0f 00 12 00 01 0d 18 00 50: 00 00 01 21 60 00 00 00 00 00 48 00 00 00 00 00 60: 00 00 00 00 00 00 00 00 01 70 22 c8 00 00 00 00 70: 05 00 81 01 00 00 e0 fe 00 00 00 00 61 40 00 00 80: 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 a0: 01 54 30 f0 6c ff 7f 0c 00 00 00 00 00 00 00 00 b0: 0c 12 41 81 04 00 03 00 00 00 00 00 00 00 00 00 c0: 03 00 27 8a 44 44 44 44 44 44 44 44 00 00 00 00 d0: 50 20 00 50 02 00 00 00 00 00 00 00 08 00 02 a8 e0: 0c 06 80 92 f8 00 00 00 80 82 f8 00 00 00 00 00 f0: 00 00 00 06 00 00 00 00 00 00 00 00 00 00 00 00 00:03.0 0604: 1106:c238 Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 0, Cache Line Size: 64 bytes Bus: primary=00, secondary=06, subordinate=06, sec-latency=0 I/O behind bridge: 0000f000-00000fff Memory behind bridge: fff00000-000fffff Prefetchable memory behind bridge: 00000000f7f00000-00000000f7f00000 Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR- BridgeCtl: Parity+ SERR+ NoISA- VGA- MAbort- >Reset- FastB2B- Capabilities: [40] Express Root Port (Slot+) IRQ 0 Device: Supported: MaxPayload 256 bytes, PhantFunc 0, ExtTag- Device: Latency L0s <512ns, L1 unlimited Device: Errors: Correctable+ Non-Fatal+ Fatal+ Unsupported+ Device: RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop- Device: MaxPayload 128 bytes, MaxReadReq 128 bytes Link: Supported Speed 2.5Gb/s, Width x4, ASPM L0s L1, Port 1 Link: Latency L0s <64ns, L1 <1us Link: ASPM Disabled RCB 64 bytes Disabled CommClk- ExtSynch- Link: Speed unknown, Width x1 Slot: AtnBtn- PwrCtrl- MRL- AtnInd- PwrInd- HotPlug+ Surpise+ Slot: Number 0, PowerLimit 0.000000 Slot: Enabled AtnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- Slot: AttnInd Unknown, PwrInd Unknown, Power- Root: Correctable- Non-Fatal- Fatal- PME- Capabilities: [68] Power Management version 2 Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+) Status: D0 PME-Enable- DSel=0 DScale=0 PME- Capabilities: [70] Message Signalled Interrupts: 64bit+ Queue=0/0 Enable+ Address: 00000000fee00000 Data: 4069 00: 06 11 38 c2 06 05 10 00 00 00 04 06 10 00 81 00 10: 00 00 00 00 00 00 00 00 00 06 06 00 f0 00 00 00 20: f0 ff 00 00 f1 f7 f1 f7 00 00 00 00 00 00 00 00 30: 00 00 00 00 40 00 00 00 00 00 00 00 0b 01 03 00 40: 10 68 41 01 c1 0e 00 00 0f 00 10 00 41 0c 18 01 50: 10 00 10 00 60 00 00 00 00 00 48 00 00 00 00 00 60: 00 00 00 00 00 00 00 00 01 70 22 c8 00 00 00 00 70: 05 00 81 01 00 00 e0 fe 00 00 00 00 69 40 00 00 80: 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 a0: 01 44 30 f0 7c ff 7f 0c 00 00 00 00 00 00 00 00 b0: 12 1b 41 81 04 00 03 00 00 00 00 00 00 00 00 00 c0: 03 00 27 8a 44 44 00 00 00 00 00 00 00 00 00 00 d0: 50 00 00 00 02 00 00 00 00 00 00 00 08 00 02 a8 e0: 00 0f 00 93 08 00 00 00 00 00 00 00 00 00 00 00 f0: 00 00 00 06 00 00 00 00 00 00 00 00 00 00 00 00 00:03.1 0604: 1106:d238 Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 0, Cache Line Size: 64 bytes Bus: primary=00, secondary=05, subordinate=05, sec-latency=0 I/O behind bridge: 0000f000-00000fff Memory behind bridge: fff00000-000fffff Prefetchable memory behind bridge: 00000000f7e00000-00000000f7e00000 Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR- BridgeCtl: Parity+ SERR+ NoISA- VGA- MAbort- >Reset- FastB2B- Capabilities: [40] Express Root Port (Slot+) IRQ 0 Device: Supported: MaxPayload 256 bytes, PhantFunc 0, ExtTag- Device: Latency L0s <64ns, L1 unlimited Device: Errors: Correctable+ Non-Fatal+ Fatal+ Unsupported+ Device: RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop- Device: MaxPayload 128 bytes, MaxReadReq 128 bytes Link: Supported Speed 2.5Gb/s, Width x1, ASPM L0s L1, Port 2 Link: Latency L0s <64ns, L1 <1us Link: ASPM Disabled RCB 64 bytes CommClk- ExtSynch- Link: Speed unknown, Width x0 Slot: AtnBtn- PwrCtrl- MRL- AtnInd- PwrInd- HotPlug+ Surpise+ Slot: Number 0, PowerLimit 0.000000 Slot: Enabled AtnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- Slot: AttnInd Unknown, PwrInd Unknown, Power- Root: Correctable- Non-Fatal- Fatal- PME- Capabilities: [68] Power Management version 2 Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+) Status: D0 PME-Enable- DSel=0 DScale=0 PME- Capabilities: [70] Message Signalled Interrupts: 64bit+ Queue=0/0 Enable+ Address: 00000000fee00000 Data: 4071 00: 06 11 38 d2 06 05 10 00 00 00 04 06 10 00 81 00 10: 00 00 00 00 00 00 00 00 00 05 05 00 f0 00 00 00 20: f0 ff 00 00 e1 f7 e1 f7 00 00 00 00 00 00 00 00 30: 00 00 00 00 40 00 00 00 00 00 00 00 0b 02 03 00 40: 10 68 41 01 01 0e 00 00 0f 00 10 00 11 0c 18 02 50: 00 00 00 00 60 00 00 00 00 00 00 00 00 00 00 00 60: 00 00 00 00 00 00 00 00 01 70 22 c8 00 00 00 00 70: 05 00 81 01 00 00 e0 fe 00 00 00 00 71 40 00 00 80: 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 a0: 01 44 30 f0 7c ff 7f 0c 00 00 00 00 00 00 00 00 b0: 12 1b 41 81 04 00 03 00 00 00 00 00 00 00 00 00 c0: 03 00 00 8a 44 44 44 44 00 00 00 00 00 00 00 00 d0: 50 00 00 00 00 00 00 00 00 00 00 00 08 00 02 a8 e0: 00 0f 00 02 00 00 00 00 00 00 00 00 00 00 00 00 f0: 00 00 00 06 00 00 00 00 00 00 00 00 00 00 00 00 00:03.2 0604: 1106:e238 Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR+ <PERR- Latency: 0, Cache Line Size: 64 bytes Bus: primary=00, secondary=04, subordinate=04, sec-latency=0 I/O behind bridge: 0000f000-00000fff Memory behind bridge: fbe00000-fbefffff Prefetchable memory behind bridge: 00000000fff00000-0000000000000000 Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR- BridgeCtl: Parity+ SERR+ NoISA- VGA- MAbort- >Reset- FastB2B- Capabilities: [40] Express Root Port (Slot+) IRQ 0 Device: Supported: MaxPayload 256 bytes, PhantFunc 0, ExtTag- Device: Latency L0s <4us, L1 unlimited Device: Errors: Correctable+ Non-Fatal+ Fatal+ Unsupported+ Device: RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop- Device: MaxPayload 128 bytes, MaxReadReq 128 bytes Link: Supported Speed 2.5Gb/s, Width x1, ASPM L0s L1, Port 3 Link: Latency L0s <64ns, L1 <1us Link: ASPM Disabled RCB 64 bytes CommClk- ExtSynch- Link: Speed 2.5Gb/s, Width x1 Slot: AtnBtn- PwrCtrl- MRL- AtnInd- PwrInd- HotPlug+ Surpise+ Slot: Number 0, PowerLimit 0.000000 Slot: Enabled AtnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- Slot: AttnInd Unknown, PwrInd Unknown, Power- Root: Correctable- Non-Fatal- Fatal- PME- Capabilities: [68] Power Management version 2 Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+) Status: D0 PME-Enable- DSel=0 DScale=0 PME- Capabilities: [70] Message Signalled Interrupts: 64bit+ Queue=0/0 Enable+ Address: 00000000fee00000 Data: 4079 00: 06 11 38 e2 06 05 10 40 00 00 04 06 10 00 81 00 10: 00 00 00 00 00 00 00 00 00 04 04 00 f0 00 00 20 20: e0 fb e0 fb f1 ff 01 00 00 00 00 00 00 00 00 00 30: 00 00 00 00 40 00 00 00 00 00 00 00 0b 03 03 00 40: 10 68 41 01 81 0f 00 00 0f 00 12 00 11 0c 18 03 50: 00 00 11 20 60 00 00 00 00 00 48 00 00 00 00 00 60: 00 00 00 00 00 00 00 00 01 70 22 c8 00 00 00 00 70: 05 00 81 01 00 00 e0 fe 00 00 00 00 79 40 00 00 80: 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 a0: 01 44 30 f0 7c ff 7f 0c 00 00 00 00 00 00 00 00 b0: 12 1b 41 81 04 00 03 00 00 00 00 00 00 00 00 00 c0: 00 00 00 8a 04 00 00 00 00 00 00 00 00 00 00 00 d0: 50 00 00 00 00 00 00 00 00 00 00 00 08 00 02 a8 e0: 00 0f 00 02 00 00 00 00 00 00 00 00 00 00 00 00 f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00:03.3 0604: 1106:f238 Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 0, Cache Line Size: 64 bytes Bus: primary=00, secondary=03, subordinate=03, sec-latency=0 I/O behind bridge: 0000f000-00000fff Memory behind bridge: fff00000-000fffff Prefetchable memory behind bridge: 00000000f7d00000-00000000f7d00000 Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR- BridgeCtl: Parity+ SERR+ NoISA- VGA- MAbort- >Reset- FastB2B- Capabilities: [40] Express Root Port (Slot+) IRQ 0 Device: Supported: MaxPayload 256 bytes, PhantFunc 0, ExtTag- Device: Latency L0s <64ns, L1 unlimited Device: Errors: Correctable+ Non-Fatal+ Fatal+ Unsupported+ Device: RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop- Device: MaxPayload 128 bytes, MaxReadReq 128 bytes Link: Supported Speed 2.5Gb/s, Width x1, ASPM L0s L1, Port 4 Link: Latency L0s <64ns, L1 <1us Link: ASPM Disabled RCB 64 bytes CommClk- ExtSynch- Link: Speed unknown, Width x0 Slot: AtnBtn- PwrCtrl- MRL- AtnInd- PwrInd- HotPlug+ Surpise+ Slot: Number 0, PowerLimit 0.000000 Slot: Enabled AtnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- Slot: AttnInd Unknown, PwrInd Unknown, Power- Root: Correctable- Non-Fatal- Fatal- PME- Capabilities: [68] Power Management version 2 Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+) Status: D0 PME-Enable- DSel=0 DScale=0 PME- Capabilities: [70] Message Signalled Interrupts: 64bit+ Queue=0/0 Enable+ Address: 00000000fee00000 Data: 4081 00: 06 11 38 f2 06 05 10 00 00 00 04 06 10 00 81 00 10: 00 00 00 00 00 00 00 00 00 03 03 00 f0 00 00 00 20: f0 ff 00 00 d1 f7 d1 f7 00 00 00 00 00 00 00 00 30: 00 00 00 00 40 00 00 00 00 00 00 00 0b 04 03 00 40: 10 68 41 01 01 0e 00 00 0f 00 10 00 11 0c 18 04 50: 00 00 00 00 60 00 00 00 00 00 00 00 00 00 00 00 60: 00 00 00 00 00 00 00 00 01 70 22 c8 00 00 00 00 70: 05 00 81 01 00 00 e0 fe 00 00 00 00 81 40 00 00 80: 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 a0: 01 44 30 f0 7c ff 7f 0c 00 00 00 00 00 00 00 00 b0: 12 1b 41 81 04 00 03 00 00 00 00 00 00 00 00 00 c0: 00 00 00 8a 04 00 00 00 00 00 00 00 00 00 00 00 d0: 50 00 00 00 00 00 00 00 00 00 00 00 08 00 02 a8 e0: 00 0f 00 02 00 00 00 00 00 00 00 00 00 00 00 00 f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00:0f.0 0101: 1106:0591 (rev 80) (prog-if 8f) Subsystem: 1106:0591 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 64 Interrupt: pin B routed to IRQ 21 Region 0: I/O ports at ec00 [size=8] Region 1: I/O ports at e880 [size=4] Region 2: I/O ports at e800 [size=8] Region 3: I/O ports at e480 [size=4] Region 4: I/O ports at e400 [size=16] Region 5: I/O ports at e000 [size=256] Capabilities: [c0] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 PME-Enable- DSel=0 DScale=0 PME- 00: 06 11 91 05 07 00 90 02 80 8f 01 01 00 40 80 00 10: 01 ec 00 00 81 e8 00 00 01 e8 00 00 81 e4 00 00 20: 01 e4 00 00 01 e0 00 00 00 00 00 00 06 11 91 05 30: 00 00 00 00 c0 00 00 00 00 00 00 00 0a 02 00 00 40: 03 03 f1 44 06 af 40 00 00 80 00 00 00 00 00 00 50: 00 00 00 00 00 00 00 22 00 10 00 00 00 00 20 00 60: 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 70: 00 00 00 00 00 00 00 00 01 00 01 10 04 00 00 00 80: 00 00 00 00 00 00 00 00 00 60 a6 3e 00 00 00 00 90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 c0: 01 00 02 00 00 00 00 00 00 00 00 00 00 00 00 00 d0: 80 02 91 05 06 11 91 05 00 00 00 00 00 00 00 00 e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00:0f.1 0101: 1106:0571 (rev 07) (prog-if 8a) Subsystem: 1106:0571 Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 32 Region 0: [virtual] Memory at 000001f0 (32-bit, non-prefetchable) [disabled] [size=8] Region 1: [virtual] Memory at 000003f0 (type 3, non-prefetchable) [disabled] [size=1] Region 2: [virtual] Memory at 00000170 (32-bit, non-prefetchable) [disabled] [size=8] Region 3: [virtual] Memory at 00000370 (type 3, non-prefetchable) [disabled] [size=1] Region 4: I/O ports at fc00 [size=16] Capabilities: [c0] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 PME-Enable- DSel=0 DScale=0 PME- 00: 06 11 71 05 05 00 90 02 07 8a 01 01 00 20 00 00 10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 20: 01 fc 00 00 00 00 00 00 00 00 00 00 06 11 71 05 30: 00 00 00 00 c0 00 00 00 00 00 00 00 ff 00 00 00 40: 0b f2 09 05 18 8c c4 00 a8 a8 a8 20 ff 00 b6 20 50: 07 07 17 e6 0c 03 00 00 a8 a8 a8 a8 00 00 00 00 60: 00 02 00 00 00 00 00 00 00 02 00 00 00 00 00 00 70: 02 01 25 00 00 00 00 00 82 01 00 00 00 00 00 00 80: 00 c0 8d 3d 00 00 00 00 00 00 00 00 00 00 00 00 90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 c0: 01 00 02 00 00 00 00 00 00 00 00 00 00 00 00 00 d0: 07 01 71 05 06 11 71 05 00 00 00 00 00 00 00 00 e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00:10.0 0c03: 1106:3038 (rev a0) Subsystem: 1106:3038 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 64, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 20 Region 4: I/O ports at d480 [size=32] Capabilities: [80] Power Management version 2 Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=375mA PME(D0+,D1+,D2+,D3hot+,D3cold+) Status: D0 PME-Enable- DSel=0 DScale=0 PME- 00: 06 11 38 30 17 00 10 02 a0 00 03 0c 10 40 80 00 10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 20: 81 d4 00 00 00 00 00 00 00 00 00 00 06 11 38 30 30: 00 00 00 00 80 00 00 00 00 00 00 00 0b 01 00 00 40: 40 12 03 00 00 00 00 00 00 0b a0 03 00 00 00 00 50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 60: 10 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 80: 01 00 c2 ff 00 00 00 00 00 00 00 00 00 00 00 00 90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 c0: 00 20 00 00 00 00 00 00 00 00 00 00 00 00 00 00 d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00:10.1 0c03: 1106:3038 (rev a0) Subsystem: 1106:3038 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 64, Cache Line Size: 64 bytes Interrupt: pin B routed to IRQ 22 Region 4: I/O ports at d800 [size=32] Capabilities: [80] Power Management version 2 Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=375mA PME(D0+,D1+,D2+,D3hot+,D3cold+) Status: D0 PME-Enable- DSel=0 DScale=0 PME- 00: 06 11 38 30 17 00 10 02 a0 00 03 0c 10 40 80 00 10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 20: 01 d8 00 00 00 00 00 00 00 00 00 00 06 11 38 30 30: 00 00 00 00 80 00 00 00 00 00 00 00 0a 02 00 00 40: 40 12 03 00 00 00 00 00 00 0b a0 03 00 00 00 00 50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 60: 10 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 80: 01 00 c2 ff 00 00 00 00 00 00 00 00 00 00 00 00 90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 c0: 00 20 00 00 00 00 00 00 00 00 00 00 00 00 00 00 d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00:10.2 0c03: 1106:3038 (rev a0) Subsystem: 1106:3038 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 64, Cache Line Size: 64 bytes Interrupt: pin C routed to IRQ 21 Region 4: I/O ports at d880 [size=32] Capabilities: [80] Power Management version 2 Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=375mA PME(D0+,D1+,D2+,D3hot+,D3cold+) Status: D0 PME-Enable- DSel=0 DScale=0 PME- 00: 06 11 38 30 17 00 10 02 a0 00 03 0c 10 40 80 00 10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 20: 81 d8 00 00 00 00 00 00 00 00 00 00 06 11 38 30 30: 00 00 00 00 80 00 00 00 00 00 00 00 05 03 00 00 40: 40 12 03 00 00 00 00 00 00 0b a0 03 00 00 00 00 50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 60: 10 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 80: 01 00 c2 ff 00 00 00 00 00 00 00 00 00 00 00 00 90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 c0: 00 20 00 00 00 00 00 00 00 00 00 00 00 00 00 00 d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00:10.3 0c03: 1106:3038 (rev a0) Subsystem: 1106:3038 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 64, Cache Line Size: 64 bytes Interrupt: pin D routed to IRQ 23 Region 4: I/O ports at dc00 [size=32] Capabilities: [80] Power Management version 2 Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=375mA PME(D0+,D1+,D2+,D3hot+,D3cold+) Status: D0 PME-Enable- DSel=0 DScale=0 PME- 00: 06 11 38 30 17 00 10 02 a0 00 03 0c 10 40 80 00 10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 20: 01 dc 00 00 00 00 00 00 00 00 00 00 06 11 38 30 30: 00 00 00 00 80 00 00 00 00 00 00 00 03 04 00 00 40: 40 12 03 00 00 00 00 00 00 0b a0 03 00 00 00 00 50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 60: 10 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 80: 01 00 c2 ff 00 00 00 00 00 00 00 00 00 00 00 00 90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 c0: 00 20 00 00 00 00 00 00 00 00 00 00 00 00 00 00 d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00:10.4 0c03: 1106:3104 (rev 86) (prog-if 20) Subsystem: 1106:3104 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 64, Cache Line Size: 64 bytes Interrupt: pin C routed to IRQ 21 Region 0: Memory at f8fffc00 (32-bit, non-prefetchable) [size=256] Capabilities: [80] Power Management version 2 Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=375mA PME(D0+,D1+,D2+,D3hot+,D3cold+) Status: D0 PME-Enable- DSel=0 DScale=0 PME- 00: 06 11 04 31 17 00 10 02 86 20 03 0c 10 40 80 00 10: 00 fc ff f8 00 00 00 00 00 00 00 00 00 00 00 00 20: 00 00 00 00 00 00 00 00 00 00 00 00 06 11 04 31 30: 00 00 00 00 80 00 00 00 00 00 00 00 05 03 00 00 40: 00 00 03 00 00 00 00 00 80 20 00 09 00 00 00 00 50: 00 5a 00 80 00 00 00 00 04 0b 03 22 03 00 00 00 60: 20 20 01 00 00 00 00 00 01 00 00 00 00 00 08 80 70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 80: 01 00 c2 ff 00 00 00 00 00 00 00 00 00 00 00 00 90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 f0: 00 00 00 00 00 00 a0 00 00 00 00 00 00 00 00 00 00:11.0 0601: 1106:3337 Subsystem: 1106:3337 Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Capabilities: [c0] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 PME-Enable- DSel=0 DScale=0 PME- 00: 06 11 37 33 03 00 10 02 00 00 01 06 00 00 80 00 10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 20: 00 00 00 00 00 00 00 00 00 00 00 00 06 11 37 33 30: 00 00 00 00 c0 00 00 00 00 00 00 00 00 00 00 00 40: 44 40 f0 0b 00 00 10 00 0c 20 00 00 44 00 0a 00 50: 00 0d 09 00 00 00 00 00 62 00 00 0b 00 00 00 00 60: 00 00 00 00 00 00 00 05 00 00 00 00 00 00 00 00 70: 06 11 37 33 00 00 00 00 00 00 00 00 00 00 00 00 80: 20 84 59 00 88 00 00 00 01 08 00 00 05 18 00 00 90: 00 fe a4 88 30 c1 01 02 00 14 00 00 00 00 00 00 a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 c0: 01 00 02 00 00 00 00 00 00 00 00 00 00 00 00 00 d0: 01 04 05 00 00 00 00 00 00 00 00 00 00 00 00 00 e0: 00 00 06 00 24 69 ef 00 00 00 00 00 04 00 00 00 f0: 00 00 00 00 00 00 03 00 00 00 00 00 00 00 00 00 00:11.7 0600: 1106:287e Subsystem: 1106:337e Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 128 Capabilities: [58] HyperTransport: Interrupt Discovery and Configuration 00: 06 11 7e 28 06 01 10 02 00 00 00 06 00 80 00 00 10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 20: 00 00 00 00 00 00 00 00 00 00 00 00 06 11 7e 33 30: 00 00 00 00 58 00 00 00 00 00 00 00 00 00 00 00 40: f4 24 00 80 82 00 00 00 23 3b 88 80 82 44 80 43 50: 80 8f d3 03 00 04 01 40 08 00 01 80 00 00 00 00 60: 00 aa 00 20 ff 00 00 00 00 00 00 00 00 00 00 00 70: 42 c8 ee 01 3c 0f 50 48 01 00 00 00 77 00 12 02 80: 08 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 a0: fd 3f df 00 00 00 00 e0 00 00 00 00 00 00 00 00 b0: 00 00 00 00 00 00 00 50 68 88 8a 88 00 03 00 00 c0: 01 00 02 00 00 00 00 00 00 00 00 00 00 00 00 00 d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 e0: 00 00 00 00 00 00 19 00 00 00 00 00 00 00 00 00 f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00:13.0 0604: 1106:337b Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR- Latency: 0 Bus: primary=00, secondary=08, subordinate=08, sec-latency=0 I/O behind bridge: 0000f000-00000fff Memory behind bridge: fbf00000-fbffffff Prefetchable memory behind bridge: 00000000fff00000-0000000000000000 Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- <SERR- <PERR- BridgeCtl: Parity+ SERR+ NoISA- VGA- MAbort- >Reset- FastB2B- Capabilities: [60] HyperTransport: MSI Mapping Capabilities: [70] #0d [0000] 00: 06 11 7b 33 06 01 10 20 00 00 04 06 00 00 81 00 10: 00 00 00 00 00 00 00 00 00 08 08 00 f0 00 00 02 20: f0 fb f0 fb f1 ff 01 00 00 00 00 00 00 00 00 00 30: 00 00 00 00 60 00 00 00 00 00 00 00 00 00 03 00 40: 02 00 06 06 00 00 00 00 00 00 00 00 00 00 00 00 50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 60: 08 70 02 a8 00 00 00 00 00 00 00 00 00 00 00 00 70: 0d 00 00 00 86 6c db b6 00 00 00 00 00 00 00 00 80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00:13.1 0604: 1106:337a (prog-if 01) Control: I/O- Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR- Latency: 0 Bus: primary=00, secondary=07, subordinate=07, sec-latency=0 I/O behind bridge: 0000f000-00000fff Memory behind bridge: fff00000-000fffff Prefetchable memory behind bridge: 00000000fff00000-0000000000000000 Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- <SERR- <PERR- BridgeCtl: Parity+ SERR+ NoISA- VGA- MAbort- >Reset- FastB2B- Capabilities: [60] HyperTransport: MSI Mapping Capabilities: [70] #0d [0000] 00: 06 11 7a 33 04 01 10 20 00 01 04 06 00 00 01 00 10: 00 00 00 00 00 00 00 00 00 07 07 00 f0 00 00 02 20: f0 ff 00 00 f1 ff 01 00 00 00 00 00 00 00 00 00 30: 00 00 00 00 60 00 00 00 00 00 00 00 00 00 03 00 40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 60: 08 70 02 a8 00 00 00 00 00 00 00 00 00 00 00 00 70: 0d 00 00 00 40 84 6b 4c 00 00 00 00 00 00 00 00 80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00:18.0 0600: 1022:1100 Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- Capabilities: [80] HyperTransport: Host or Secondary Interface !!! Possibly incomplete decoding Command: WarmRst+ DblEnd- Link Control: CFlE- CST- CFE- <LkFail- Init+ EOC- TXO- <CRCErr=0 Link Config: MLWI=16bit MLWO=16bit LWI=16bit LWO=16bit Revision ID: 1.02 00: 22 10 00 11 00 00 10 00 00 00 00 06 00 00 80 00 10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 30: 00 00 00 00 80 00 00 00 00 00 00 00 00 00 00 00 40: 01 01 01 00 01 01 01 00 01 01 01 00 01 01 01 00 50: 01 01 01 00 01 01 01 00 01 01 01 00 01 01 01 00 60: 00 00 01 00 e4 00 00 00 20 c8 0e 0f 2c 00 00 00 70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 80: 08 00 01 21 20 00 11 11 22 06 75 80 02 00 00 00 90: 56 04 51 02 00 00 ff 00 07 00 00 00 00 00 00 00 a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00:18.1 0600: 1022:1101 Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- 00: 22 10 01 11 00 00 00 00 00 00 00 06 00 00 80 00 10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 40: 03 00 00 00 00 00 3f 00 00 00 00 00 01 00 00 00 50: 00 00 00 00 02 00 00 00 00 00 00 00 03 00 00 00 60: 00 00 00 00 04 00 00 00 00 00 00 00 05 00 00 00 70: 00 00 00 00 06 00 00 00 00 00 00 00 07 00 00 00 80: 03 00 e0 00 80 ff ef 00 00 00 00 00 00 00 00 00 90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 b0: 03 0a 00 00 00 0b 00 00 03 00 40 00 00 ff ff 00 c0: 13 10 00 00 00 f0 ff 00 00 00 00 00 00 00 00 00 d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 e0: 03 00 00 ff 00 00 00 00 00 00 00 00 00 00 00 00 f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00:18.2 0600: 1022:1102 Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- 00: 22 10 02 11 00 00 00 00 00 00 00 06 00 00 80 00 10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 40: 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 60: e0 3f 38 00 00 00 00 00 00 00 00 00 00 00 00 00 70: 00 00 00 00 00 00 00 00 46 00 00 00 00 00 00 00 80: 02 00 00 00 00 00 00 00 34 f3 ef 5d 20 13 13 00 90: 10 08 01 00 5a 80 00 64 21 00 00 80 17 17 17 16 a0: e9 02 00 5d 00 00 00 00 00 00 00 00 00 00 00 00 b0: 5c 72 95 8e be 00 00 00 20 c0 08 33 0e b0 46 80 c0: 00 00 03 00 00 00 00 00 00 00 00 00 00 00 00 00 d0: d5 60 0d 40 f4 43 0a cd c6 ac c5 1f 10 5c 01 f8 e0: c2 20 81 67 56 02 a0 ec 97 c8 e0 e6 ca c9 27 d1 f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00:18.3 0600: 1022:1103 Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- Capabilities: [f0] #0f [0010] 00: 22 10 03 11 00 00 10 00 00 00 00 06 00 00 80 00 10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 30: 00 00 00 00 f0 00 00 00 00 00 00 00 00 00 00 00 40: 03 00 00 00 40 00 50 0a 00 00 00 00 00 00 00 00 50: 00 00 00 00 00 00 00 00 00 00 00 00 40 f0 f3 9c 60: 59 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 70: 11 01 02 51 11 80 00 50 00 2a 00 08 2a 22 00 00 80: 00 00 07 23 13 21 13 21 00 00 00 00 00 00 00 00 90: 00 00 00 00 23 08 00 00 80 42 76 1d 00 00 00 00 a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 d0: 00 00 00 00 01 a7 0d 00 00 00 60 00 25 25 25 00 e0: 00 00 00 00 24 1b 46 00 19 17 00 00 00 00 00 00 f0: 0f 00 10 00 00 04 00 00 02 00 00 00 b2 0f 04 00 02:00.0 0300: 10de:0141 (rev a2) Subsystem: 1462:0410 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 0, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 11 Region 0: Memory at fa000000 (32-bit, non-prefetchable) [size=16M] Region 1: Memory at d0000000 (64-bit, prefetchable) [size=256M] Region 3: Memory at f9000000 (64-bit, non-prefetchable) [size=16M] Expansion ROM at fbde0000 [disabled] [size=128K] Capabilities: [60] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 PME-Enable- DSel=0 DScale=0 PME- Capabilities: [68] Message Signalled Interrupts: 64bit+ Queue=0/0 Enable- Address: 0000000000000000 Data: 0000 Capabilities: [78] Express Endpoint IRQ 0 Device: Supported: MaxPayload 128 bytes, PhantFunc 0, ExtTag- Device: Latency L0s <512ns, L1 <4us Device: AtnBtn- AtnInd- PwrInd- Device: Errors: Correctable- Non-Fatal- Fatal- Unsupported- Device: RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+ Device: MaxPayload 128 bytes, MaxReadReq 512 bytes Link: Supported Speed 2.5Gb/s, Width x16, ASPM L0s L1, Port 0 Link: Latency L0s <1us, L1 <4us Link: ASPM Disabled RCB 128 bytes CommClk- ExtSynch- Link: Speed 2.5Gb/s, Width x16 00: de 10 41 01 07 01 10 00 a2 00 00 03 10 00 00 00 10: 00 00 00 fa 0c 00 00 d0 00 00 00 00 04 00 00 f9 20: 00 00 00 00 00 00 00 00 00 00 00 00 62 14 10 04 30: 00 00 de fb 60 00 00 00 00 00 00 00 0b 01 00 00 40: 62 14 10 04 00 00 00 00 00 00 00 00 00 00 00 00 50: 01 00 00 00 01 00 00 00 ce d6 23 00 00 00 00 00 60: 01 68 02 00 00 00 00 00 05 78 80 00 00 00 00 00 70: 00 00 00 00 00 00 00 00 10 00 01 00 c0 04 00 00 80: 10 28 0a 00 01 4d 01 00 08 00 01 01 00 00 00 00 90: 00 00 00 00 00 00 00 00 0c 08 40 c1 01 04 40 c1 a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 04:00.0 0200: 1969:1048 (rev b0) Subsystem: 1043:8226 Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 0, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 2298 Region 0: Memory at fbec0000 (64-bit, non-prefetchable) [size=256K] Expansion ROM at fbea0000 [disabled] [size=128K] Capabilities: [40] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot+,D3cold+) Status: D0 PME-Enable- DSel=0 DScale=0 PME- Capabilities: [48] Message Signalled Interrupts: 64bit+ Queue=0/0 Enable+ Address: 00000000fee01000 Data: 40c9 Capabilities: [58] Express Endpoint IRQ 0 Device: Supported: MaxPayload 128 bytes, PhantFunc 0, ExtTag- Device: Latency L0s <4us, L1 unlimited Device: AtnBtn+ AtnInd+ PwrInd+ Device: Errors: Correctable- Non-Fatal- Fatal- Unsupported- Device: RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop- Device: MaxPayload 128 bytes, MaxReadReq 512 bytes Link: Supported Speed 2.5Gb/s, Width x1, ASPM L0s, Port 0 Link: Latency L0s unlimited, L1 unlimited Link: ASPM Disabled RCB 64 bytes CommClk- ExtSynch- Link: Speed 2.5Gb/s, Width x1 Capabilities: [6c] Vital Product Data 00: 69 19 48 10 06 05 10 00 b0 00 00 02 10 00 00 00 10: 04 00 ec fb 00 00 00 00 00 00 00 00 00 00 00 00 20: 00 00 00 00 00 00 00 00 00 00 00 00 43 10 26 82 30: 00 00 ea fb 40 00 00 00 00 00 00 00 0b 01 00 00 40: 01 48 02 c0 00 00 00 00 05 58 81 00 00 10 e0 fe 50: 00 00 00 00 c9 40 00 00 10 6c 01 00 80 7f 00 00 60: 00 20 1b 00 11 f4 03 00 00 00 11 10 03 00 28 81 70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 80: 00 00 00 00 69 19 48 10 00 00 00 00 00 00 00 00 90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 08:01.0 0403: 1106:3288 (rev 10) Subsystem: 1043:81e7 Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 0, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 17 Region 0: Memory at fbffc000 (64-bit, non-prefetchable) [size=16K] Capabilities: [50] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=55mA PME(D0+,D1-,D2-,D3hot+,D3cold+) Status: D0 PME-Enable- DSel=0 DScale=0 PME- Capabilities: [60] Message Signalled Interrupts: 64bit+ Queue=0/0 Enable- Address: 0000000000000000 Data: 0000 Capabilities: [70] Express Unknown type IRQ 0 Device: Supported: MaxPayload 128 bytes, PhantFunc 0, ExtTag- Device: Latency L0s <64ns, L1 <1us Device: Errors: Correctable- Non-Fatal- Fatal- Unsupported- Device: RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop- Device: MaxPayload 128 bytes, MaxReadReq 128 bytes Link: Supported Speed unknown, Width x0, ASPM unknown, Port 0 Link: Latency L0s <64ns, L1 <1us Link: ASPM Disabled CommClk- ExtSynch- Link: Speed unknown, Width x0 00: 06 11 88 32 06 00 10 00 10 00 03 04 10 00 00 00 10: 04 c0 ff fb 00 00 00 00 00 00 00 00 00 00 00 00 20: 00 00 00 00 00 00 00 00 00 00 00 00 43 10 e7 81 30: 00 00 00 00 50 00 00 00 00 00 00 00 0a 01 00 00 40: 00 30 00 00 00 00 00 00 00 00 00 00 00 00 00 00 50: 01 60 42 c8 00 00 00 00 00 00 00 00 00 00 00 00 60: 05 70 80 00 00 00 00 00 00 00 00 00 00 00 00 00 70: 10 00 91 00 00 00 00 00 00 00 30 00 00 00 00 00 80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ^ permalink raw reply [flat|nested] 12+ messages in thread
* [PATCH] sata_via: fix resource-managed iomap conversion 2007-02-12 18:51 ` [PATCH] sata_via: fix resource-managed iomap conversion Tejun Heo 2007-02-12 19:33 ` Markus Trippelsdorf @ 2007-02-20 11:01 ` Tejun Heo 2007-02-20 16:03 ` Jeff Garzik 1 sibling, 1 reply; 12+ messages in thread From: Tejun Heo @ 2007-02-20 11:01 UTC (permalink / raw) To: Jeff Garzik; +Cc: Markus Trippelsdorf, linux-ide, LKML Conversion to resource-managed iomap was buggy causing init failures on both vt6420 and 6421 - BAR5 wasn't mapped for both controllers while on vt6420 sata_via tried to map BAR0-4 twice. Fix it. Signed-off-by: Tejun Heo <htejun@gmail.com> --- I thought I have a vt6421 but mine too was a vt6420. So, the patch is verified only for vt6420 but, the vt6421 path is pretty obvious and should be correct. Please apply. diff --git a/drivers/ata/sata_via.c b/drivers/ata/sata_via.c index baca6d7..fe9101a 100644 --- a/drivers/ata/sata_via.c +++ b/drivers/ata/sata_via.c @@ -423,16 +423,21 @@ static struct ata_probe_ent *vt6420_init_probe_ent(struct pci_dev *pdev) { struct ata_probe_ent *probe_ent; struct ata_port_info *ppi[2]; - void __iomem * const *iomap; + void __iomem *bar5; ppi[0] = ppi[1] = &vt6420_port_info; probe_ent = ata_pci_init_native_mode(pdev, ppi, ATA_PORT_PRIMARY | ATA_PORT_SECONDARY); if (!probe_ent) return NULL; - iomap = pcim_iomap_table(pdev); - probe_ent->port[0].scr_addr = svia_scr_addr(iomap[5], 0); - probe_ent->port[1].scr_addr = svia_scr_addr(iomap[5], 1); + bar5 = pcim_iomap(pdev, 5, 0); + if (!bar5) { + dev_printk(KERN_ERR, &pdev->dev, "failed to iomap PCI BAR 5\n"); + return NULL; + } + + probe_ent->port[0].scr_addr = svia_scr_addr(bar5, 0); + probe_ent->port[1].scr_addr = svia_scr_addr(bar5, 1); return probe_ent; } @@ -460,6 +465,13 @@ static struct ata_probe_ent *vt6421_init_probe_ent(struct pci_dev *pdev) probe_ent->mwdma_mask = 0x07; probe_ent->udma_mask = 0x7f; + for (i = 0; i < 6; i++) + if (!pcim_iomap(pdev, i, 0)) { + dev_printk(KERN_ERR, &pdev->dev, + "failed to iomap PCI BAR %d\n", i); + return NULL; + } + for (i = 0; i < N_PORTS; i++) vt6421_init_addrs(probe_ent, pcim_iomap_table(pdev), i); @@ -522,7 +534,7 @@ static int svia_init_one (struct pci_dev *pdev, const struct pci_device_id *ent) if (rc) return rc; - rc = pcim_iomap_regions(pdev, 0x1f, DRV_NAME); + rc = pci_request_regions(pdev, DRV_NAME); if (rc) { pcim_pin_device(pdev); return rc; ^ permalink raw reply related [flat|nested] 12+ messages in thread
* Re: [PATCH] sata_via: fix resource-managed iomap conversion 2007-02-20 11:01 ` Tejun Heo @ 2007-02-20 16:03 ` Jeff Garzik 0 siblings, 0 replies; 12+ messages in thread From: Jeff Garzik @ 2007-02-20 16:03 UTC (permalink / raw) To: Tejun Heo; +Cc: Markus Trippelsdorf, linux-ide, LKML Tejun Heo wrote: > Conversion to resource-managed iomap was buggy causing init failures > on both vt6420 and 6421 - BAR5 wasn't mapped for both controllers > while on vt6420 sata_via tried to map BAR0-4 twice. Fix it. > > Signed-off-by: Tejun Heo <htejun@gmail.com> > --- > I thought I have a vt6421 but mine too was a vt6420. So, the patch is > verified only for vt6420 but, the vt6421 path is pretty obvious and > should be correct. Please apply. applied ^ permalink raw reply [flat|nested] 12+ messages in thread
end of thread, other threads:[~2007-02-20 16:03 UTC | newest] Thread overview: 12+ messages (download: mbox.gz / follow: Atom feed) -- links below jump to the message on this page -- 2007-02-10 1:09 [git patches] libata updates 1 of 3 Jeff Garzik 2007-02-10 5:46 ` Markus Trippelsdorf 2007-02-10 10:20 ` David Woodhouse 2007-02-11 22:08 ` Tejun Heo 2007-02-12 2:58 ` Markus Trippelsdorf 2007-02-12 18:51 ` [PATCH] sata_via: fix resource-managed iomap conversion Tejun Heo 2007-02-12 19:33 ` Markus Trippelsdorf 2007-02-12 20:10 ` Tejun Heo 2007-02-15 11:29 ` Jarek Poplawski 2007-02-17 18:12 ` Jay Cliburn 2007-02-20 11:01 ` Tejun Heo 2007-02-20 16:03 ` Jeff Garzik
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.