From: Marcel Holtmann <marcel@holtmann.org>
To: Aaron Ma <aaron.ma@canonical.com>
Cc: Johan Hedberg <johan.hedberg@gmail.com>,
Luiz Augusto von Dentz <luiz.dentz@gmail.com>,
matthias.bgg@gmail.com,
linux-bluetooth <linux-bluetooth@vger.kernel.org>,
open list <linux-kernel@vger.kernel.org>,
linux-mediatek@lists.infradead.org
Subject: Re: [PATCH v2] Bluetooth: btusb: Add support for Foxconn Mediatek Chip
Date: Thu, 29 Jul 2021 13:48:46 +0200 [thread overview]
Message-ID: <117CE889-33B8-4D1D-A81F-AC2AC9A0371D@holtmann.org> (raw)
In-Reply-To: <20210722171718.134034-1-aaron.ma@canonical.com>
Hi Aaron,
> Add support for another Foxconn / Hon Hai device with MT7921 chip.
>
> T: Bus=05 Lev=01 Prnt=01 Port=03 Cnt=02 Dev#= 3 Spd=480 MxCh= 0
> D: Ver= 2.10 Cls=ef(misc ) Sub=02 Prot=01 MxPS=64 #Cfgs= 1
> P: Vendor=0489 ProdID=e0cd Rev= 1.00
> S: Manufacturer=MediaTek Inc.
> S: Product=Wireless_Device
> S: SerialNumber=000000000
> C:* #Ifs= 3 Cfg#= 1 Atr=e0 MxPwr=100mA
> A: FirstIf#= 0 IfCount= 3 Cls=e0(wlcon) Sub=01 Prot=01
> I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
> E: Ad=81(I) Atr=03(Int.) MxPS= 16 Ivl=125us
> E: Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
> E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
> I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
> E: Ad=83(I) Atr=01(Isoc) MxPS= 0 Ivl=1ms
> E: Ad=03(O) Atr=01(Isoc) MxPS= 0 Ivl=1ms
> I: If#= 1 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
> E: Ad=83(I) Atr=01(Isoc) MxPS= 9 Ivl=1ms
> E: Ad=03(O) Atr=01(Isoc) MxPS= 9 Ivl=1ms
> I: If#= 1 Alt= 2 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
> E: Ad=83(I) Atr=01(Isoc) MxPS= 17 Ivl=1ms
> E: Ad=03(O) Atr=01(Isoc) MxPS= 17 Ivl=1ms
> I: If#= 1 Alt= 3 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
> E: Ad=83(I) Atr=01(Isoc) MxPS= 25 Ivl=1ms
> E: Ad=03(O) Atr=01(Isoc) MxPS= 25 Ivl=1ms
> I: If#= 1 Alt= 4 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
> E: Ad=83(I) Atr=01(Isoc) MxPS= 33 Ivl=1ms
> E: Ad=03(O) Atr=01(Isoc) MxPS= 33 Ivl=1ms
> I: If#= 1 Alt= 5 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
> E: Ad=83(I) Atr=01(Isoc) MxPS= 49 Ivl=1ms
> E: Ad=03(O) Atr=01(Isoc) MxPS= 49 Ivl=1ms
> I: If#= 1 Alt= 6 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
> E: Ad=83(I) Atr=01(Isoc) MxPS= 63 Ivl=1ms
> E: Ad=03(O) Atr=01(Isoc) MxPS= 63 Ivl=1ms
> I:* If#= 2 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=(none)
> E: Ad=8a(I) Atr=03(Int.) MxPS= 64 Ivl=125us
> E: Ad=0a(O) Atr=03(Int.) MxPS= 64 Ivl=125us
> I: If#= 2 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=(none)
> E: Ad=8a(I) Atr=03(Int.) MxPS= 512 Ivl=125us
> E: Ad=0a(O) Atr=03(Int.) MxPS= 512 Ivl=125us
>
> Signed-off-by: Aaron Ma <aaron.ma@canonical.com>
> ---
> drivers/bluetooth/btusb.c | 3 +++
> 1 file changed, 3 insertions(+)
I can’t apply this cleanly to bluetooth-next tree. Please rebase it.
Regards
Marcel
WARNING: multiple messages have this Message-ID (diff)
From: Marcel Holtmann <marcel@holtmann.org>
To: Aaron Ma <aaron.ma@canonical.com>
Cc: Johan Hedberg <johan.hedberg@gmail.com>,
Luiz Augusto von Dentz <luiz.dentz@gmail.com>,
matthias.bgg@gmail.com,
linux-bluetooth <linux-bluetooth@vger.kernel.org>,
open list <linux-kernel@vger.kernel.org>,
linux-mediatek@lists.infradead.org
Subject: Re: [PATCH v2] Bluetooth: btusb: Add support for Foxconn Mediatek Chip
Date: Thu, 29 Jul 2021 13:48:46 +0200 [thread overview]
Message-ID: <117CE889-33B8-4D1D-A81F-AC2AC9A0371D@holtmann.org> (raw)
In-Reply-To: <20210722171718.134034-1-aaron.ma@canonical.com>
Hi Aaron,
> Add support for another Foxconn / Hon Hai device with MT7921 chip.
>
> T: Bus=05 Lev=01 Prnt=01 Port=03 Cnt=02 Dev#= 3 Spd=480 MxCh= 0
> D: Ver= 2.10 Cls=ef(misc ) Sub=02 Prot=01 MxPS=64 #Cfgs= 1
> P: Vendor=0489 ProdID=e0cd Rev= 1.00
> S: Manufacturer=MediaTek Inc.
> S: Product=Wireless_Device
> S: SerialNumber=000000000
> C:* #Ifs= 3 Cfg#= 1 Atr=e0 MxPwr=100mA
> A: FirstIf#= 0 IfCount= 3 Cls=e0(wlcon) Sub=01 Prot=01
> I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
> E: Ad=81(I) Atr=03(Int.) MxPS= 16 Ivl=125us
> E: Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
> E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
> I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
> E: Ad=83(I) Atr=01(Isoc) MxPS= 0 Ivl=1ms
> E: Ad=03(O) Atr=01(Isoc) MxPS= 0 Ivl=1ms
> I: If#= 1 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
> E: Ad=83(I) Atr=01(Isoc) MxPS= 9 Ivl=1ms
> E: Ad=03(O) Atr=01(Isoc) MxPS= 9 Ivl=1ms
> I: If#= 1 Alt= 2 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
> E: Ad=83(I) Atr=01(Isoc) MxPS= 17 Ivl=1ms
> E: Ad=03(O) Atr=01(Isoc) MxPS= 17 Ivl=1ms
> I: If#= 1 Alt= 3 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
> E: Ad=83(I) Atr=01(Isoc) MxPS= 25 Ivl=1ms
> E: Ad=03(O) Atr=01(Isoc) MxPS= 25 Ivl=1ms
> I: If#= 1 Alt= 4 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
> E: Ad=83(I) Atr=01(Isoc) MxPS= 33 Ivl=1ms
> E: Ad=03(O) Atr=01(Isoc) MxPS= 33 Ivl=1ms
> I: If#= 1 Alt= 5 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
> E: Ad=83(I) Atr=01(Isoc) MxPS= 49 Ivl=1ms
> E: Ad=03(O) Atr=01(Isoc) MxPS= 49 Ivl=1ms
> I: If#= 1 Alt= 6 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
> E: Ad=83(I) Atr=01(Isoc) MxPS= 63 Ivl=1ms
> E: Ad=03(O) Atr=01(Isoc) MxPS= 63 Ivl=1ms
> I:* If#= 2 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=(none)
> E: Ad=8a(I) Atr=03(Int.) MxPS= 64 Ivl=125us
> E: Ad=0a(O) Atr=03(Int.) MxPS= 64 Ivl=125us
> I: If#= 2 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=(none)
> E: Ad=8a(I) Atr=03(Int.) MxPS= 512 Ivl=125us
> E: Ad=0a(O) Atr=03(Int.) MxPS= 512 Ivl=125us
>
> Signed-off-by: Aaron Ma <aaron.ma@canonical.com>
> ---
> drivers/bluetooth/btusb.c | 3 +++
> 1 file changed, 3 insertions(+)
I can’t apply this cleanly to bluetooth-next tree. Please rebase it.
Regards
Marcel
_______________________________________________
Linux-mediatek mailing list
Linux-mediatek@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-mediatek
next prev parent reply other threads:[~2021-07-29 11:49 UTC|newest]
Thread overview: 14+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-07-08 13:12 [PATCH] Bluetooth: btusb: Add support for Foxconn Mediatek Chip Aaron Ma
2021-07-08 13:12 ` Aaron Ma
2021-07-08 14:10 ` bluez.test.bot
2021-07-22 14:15 ` [PATCH] " Marcel Holtmann
2021-07-22 14:15 ` Marcel Holtmann
2021-07-22 17:17 ` [PATCH v2] " Aaron Ma
2021-07-22 17:17 ` Aaron Ma
2021-07-22 18:00 ` Marcel Holtmann
2021-07-22 18:00 ` Marcel Holtmann
2021-07-27 2:09 ` [v2] " bluez.test.bot
2021-07-29 11:48 ` Marcel Holtmann [this message]
2021-07-29 11:48 ` [PATCH v2] " Marcel Holtmann
2021-07-29 12:24 ` Aaron Ma
2021-07-29 12:24 ` Aaron Ma
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=117CE889-33B8-4D1D-A81F-AC2AC9A0371D@holtmann.org \
--to=marcel@holtmann.org \
--cc=aaron.ma@canonical.com \
--cc=johan.hedberg@gmail.com \
--cc=linux-bluetooth@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mediatek@lists.infradead.org \
--cc=luiz.dentz@gmail.com \
--cc=matthias.bgg@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.