All of lore.kernel.org
 help / color / mirror / Atom feed
From: Tony Lindgren <tony@atomide.com>
To: linux-omap-open-source@linux.omap.com
Subject: [PATCH 11/52] musb_hdrc: Search and replace wCount with len
Date: Mon, 13 Aug 2007 06:48:46 -0700	[thread overview]
Message-ID: <1187012995338-git-send-email-tony@atomide.com> (raw)
In-Reply-To: <11870129934099-git-send-email-tony@atomide.com>

Search and replace wCount with len

Signed-off-by: Tony Lindgren <tony@atomide.com>
---
 drivers/usb/musb/g_ep0.c       |   10 ++++----
 drivers/usb/musb/musb_gadget.c |   12 +++++-----
 drivers/usb/musb/musb_host.c   |   16 +++++++-------
 drivers/usb/musb/musbdefs.h    |    4 +-
 drivers/usb/musb/plat_uds.c    |   44 ++++++++++++++++++++--------------------
 5 files changed, 43 insertions(+), 43 deletions(-)

--- a/drivers/usb/musb/g_ep0.c
+++ b/drivers/usb/musb/g_ep0.c
@@ -599,17 +599,17 @@ __acquires(musb->Lock)
 irqreturn_t musb_g_ep0_irq(struct musb *musb)
 {
 	u16		wCsrVal;
-	u16		wCount;
+	u16		len;
 	void __iomem	*mbase = musb->mregs;
 	void __iomem	*regs = musb->aLocalEnd[0].regs;
 	irqreturn_t	retval = IRQ_NONE;
 
 	MGC_SelectEnd(mbase, 0);	/* select ep0 */
 	wCsrVal = musb_readw(regs, MGC_O_HDRC_CSR0);
-	wCount = musb_readb(regs, MGC_O_HDRC_COUNT0);
+	len = musb_readb(regs, MGC_O_HDRC_COUNT0);
 
 	DBG(4, "csr %04x, count %d, myaddr %d, ep0stage %s\n",
-			wCsrVal, wCount,
+			wCsrVal, len,
 			musb_readb(mbase, MGC_O_HDRC_FADDR),
 			decode_ep0stage(musb->ep0_state));
 
@@ -696,8 +696,8 @@ irqreturn_t musb_g_ep0_irq(struct musb *musb)
 			struct usb_ctrlrequest	setup;
 			int			handled = 0;
 
-			if (wCount != 8) {
-				ERR("SETUP packet len %d != 8 ?\n", wCount);
+			if (len != 8) {
+				ERR("SETUP packet len %d != 8 ?\n", len);
 				break;
 			}
 			musb_read_setup(musb, &setup);
--- a/drivers/usb/musb/musb_gadget.c
+++ b/drivers/usb/musb/musb_gadget.c
@@ -578,7 +578,7 @@ static void rxstate(struct musb *musb, struct musb_request *req)
 	struct musb_ep		*musb_ep = &musb->aLocalEnd[bEnd].ep_out;
 	void __iomem		*epio = musb->aLocalEnd[bEnd].regs;
 	u16			fifo_count = 0;
-	u16			wCount = musb_ep->wPacketSize;
+	u16			len = musb_ep->wPacketSize;
 
 	wCsrVal = musb_readw(epio, MGC_O_HDRC_RXCSR);
 
@@ -610,7 +610,7 @@ static void rxstate(struct musb *musb, struct musb_request *req)
 	}
 
 	if (wCsrVal & MGC_M_RXCSR_RXPKTRDY) {
-		wCount = musb_readw(epio, MGC_O_HDRC_RXCOUNT);
+		len = musb_readw(epio, MGC_O_HDRC_RXCOUNT);
 		if (pRequest->actual < pRequest->length) {
 #ifdef CONFIG_USB_INVENTRA_DMA
 			if (is_dma_capable() && musb_ep->dma) {
@@ -663,7 +663,7 @@ static void rxstate(struct musb *musb, struct musb_request *req)
 					transfer_size = min(pRequest->length,
 							channel->dwMaxLength);
 #else
-					transfer_size = wCount;
+					transfer_size = len;
 #endif
 					if (transfer_size <= musb_ep->wPacketSize)
 						musb_ep->dma->bDesiredMode = 0;
@@ -687,10 +687,10 @@ static void rxstate(struct musb *musb, struct musb_request *req)
 			fifo_count = pRequest->length - pRequest->actual;
 			DBG(3, "%s OUT/RX pio fifo %d/%d, maxpacket %d\n",
 					musb_ep->end_point.name,
-					wCount, fifo_count,
+					len, fifo_count,
 					musb_ep->wPacketSize);
 
-			fifo_count = min(wCount, fifo_count);
+			fifo_count = min(len, fifo_count);
 
 #ifdef	CONFIG_USB_TUSB_OMAP_DMA
 			if (tusb_dma_omap() && musb_ep->dma) {
@@ -725,7 +725,7 @@ static void rxstate(struct musb *musb, struct musb_request *req)
 	}
 
 	/* reach the end or short packet detected */
-	if (pRequest->actual == pRequest->length || wCount < musb_ep->wPacketSize)
+	if (pRequest->actual == pRequest->length || len < musb_ep->wPacketSize)
 		musb_g_giveback(musb_ep, pRequest, 0);
 }
 
--- a/drivers/usb/musb/musb_host.c
+++ b/drivers/usb/musb/musb_host.c
@@ -943,7 +943,7 @@ static void musb_ep_program(struct musb *musb, u8 bEnd,
  * Return TRUE until it's time to start the status stage.
  */
 static int musb_h_ep0_continue(struct musb *musb,
-				u16 wCount, struct urb *pUrb)
+				u16 len, struct urb *pUrb)
 {
 	int			 bMore = FALSE;
 	u8 *pFifoDest = NULL;
@@ -955,15 +955,15 @@ static int musb_h_ep0_continue(struct musb *musb,
 	switch (musb->bEnd0Stage) {
 	case MGC_END0_IN:
 		pFifoDest = pUrb->transfer_buffer + pUrb->actual_length;
-		fifo_count = min(wCount, ((u16) (pUrb->transfer_buffer_length
+		fifo_count = min(len, ((u16) (pUrb->transfer_buffer_length
 					- pUrb->actual_length)));
-		if (fifo_count < wCount)
+		if (fifo_count < len)
 			pUrb->status = -EOVERFLOW;
 
 		musb_read_fifo(hw_ep, fifo_count, pFifoDest);
 
 		pUrb->actual_length += fifo_count;
-		if (wCount < qh->maxpacket) {
+		if (len < qh->maxpacket) {
 			/* always terminate on short read; it's
 			 * rarely reported as an error.
 			 */
@@ -1021,7 +1021,7 @@ static int musb_h_ep0_continue(struct musb *musb,
 irqreturn_t musb_h_ep0_irq(struct musb *musb)
 {
 	struct urb		*pUrb;
-	u16			wCsrVal, wCount;
+	u16			wCsrVal, len;
 	int			status = 0;
 	void __iomem		*mbase = musb->mregs;
 	struct musb_hw_ep	*hw_ep = musb->control_ep;
@@ -1035,12 +1035,12 @@ irqreturn_t musb_h_ep0_irq(struct musb *musb)
 
 	MGC_SelectEnd(mbase, 0);
 	wCsrVal = musb_readw(epio, MGC_O_HDRC_CSR0);
-	wCount = (wCsrVal & MGC_M_CSR0_RXPKTRDY)
+	len = (wCsrVal & MGC_M_CSR0_RXPKTRDY)
 			? musb_readb(epio, MGC_O_HDRC_COUNT0)
 			: 0;
 
 	DBG(4, "<== csr0 %04x, qh %p, count %d, urb %p, stage %d\n",
-		wCsrVal, qh, wCount, pUrb, musb->bEnd0Stage);
+		wCsrVal, qh, len, pUrb, musb->bEnd0Stage);
 
 	/* if we just did status stage, we are done */
 	if (MGC_END0_STATUS == musb->bEnd0Stage) {
@@ -1112,7 +1112,7 @@ irqreturn_t musb_h_ep0_irq(struct musb *musb)
 
 	if (!bComplete) {
 		/* call common logic and prepare response */
-		if (musb_h_ep0_continue(musb, wCount, pUrb)) {
+		if (musb_h_ep0_continue(musb, len, pUrb)) {
 			/* more packets required */
 			wCsrVal = (MGC_END0_IN == musb->bEnd0Stage)
 				?  MGC_M_CSR0_H_REQPKT : MGC_M_CSR0_TXPKTRDY;
--- a/drivers/usb/musb/musbdefs.h
+++ b/drivers/usb/musb/musbdefs.h
@@ -500,9 +500,9 @@ extern void musb_start(struct musb *musb);
 extern void musb_stop(struct musb *musb);
 
 extern void musb_write_fifo(struct musb_hw_ep *ep,
-			     u16 wCount, const u8 * src);
+			     u16 len, const u8 * src);
 extern void musb_read_fifo(struct musb_hw_ep *ep,
-			       u16 wCount, u8 * dst);
+			       u16 len, u8 * dst);
 
 extern void musb_load_testpacket(struct musb *);
 
--- a/drivers/usb/musb/plat_uds.c
+++ b/drivers/usb/musb/plat_uds.c
@@ -169,14 +169,14 @@ static inline struct musb *dev_to_musb(struct device *dev)
 /*
  * Load an endpoint's FIFO
  */
-void musb_write_fifo(struct musb_hw_ep *hw_ep, u16 wCount, const u8 *src)
+void musb_write_fifo(struct musb_hw_ep *hw_ep, u16 len, const u8 *src)
 {
 	void __iomem *fifo = hw_ep->fifo;
 
 	prefetch((u8 *)src);
 
 	DBG(4, "%cX ep%d fifo %p count %d buf %p\n",
-			'T', hw_ep->bLocalEnd, fifo, wCount, src);
+			'T', hw_ep->bLocalEnd, fifo, len, src);
 
 	/* we can't assume unaligned reads work */
 	if (likely((0x01 & (unsigned long) src) == 0)) {
@@ -184,37 +184,37 @@ void musb_write_fifo(struct musb_hw_ep *hw_ep, u16 wCount, const u8 *src)
 
 		/* best case is 32bit-aligned source address */
 		if ((0x02 & (unsigned long) src) == 0) {
-			if (wCount >= 4) {
-				writesl(fifo, src + index, wCount >> 2);
-				index += wCount & ~0x03;
+			if (len >= 4) {
+				writesl(fifo, src + index, len >> 2);
+				index += len & ~0x03;
 			}
-			if (wCount & 0x02) {
+			if (len & 0x02) {
 				musb_writew(fifo, 0, *(u16*)&src[index]);
 				index += 2;
 			}
 		} else {
-			if (wCount >= 2) {
-				writesw(fifo, src + index, wCount >> 1);
-				index += wCount & ~0x01;
+			if (len >= 2) {
+				writesw(fifo, src + index, len >> 1);
+				index += len & ~0x01;
 			}
 		}
-		if (wCount & 0x01)
+		if (len & 0x01)
 			musb_writeb(fifo, 0, src[index]);
 	} else  {
 		/* byte aligned */
-		writesb(fifo, src, wCount);
+		writesb(fifo, src, len);
 	}
 }
 
 /*
  * Unload an endpoint's FIFO
  */
-void musb_read_fifo(struct musb_hw_ep *hw_ep, u16 wCount, u8 *dst)
+void musb_read_fifo(struct musb_hw_ep *hw_ep, u16 len, u8 *dst)
 {
 	void __iomem *fifo = hw_ep->fifo;
 
 	DBG(4, "%cX ep%d fifo %p count %d buf %p\n",
-			'R', hw_ep->bLocalEnd, fifo, wCount, dst);
+			'R', hw_ep->bLocalEnd, fifo, len, dst);
 
 	/* we can't assume unaligned writes work */
 	if (likely((0x01 & (unsigned long) dst) == 0)) {
@@ -222,25 +222,25 @@ void musb_read_fifo(struct musb_hw_ep *hw_ep, u16 wCount, u8 *dst)
 
 		/* best case is 32bit-aligned destination address */
 		if ((0x02 & (unsigned long) dst) == 0) {
-			if (wCount >= 4) {
-				readsl(fifo, dst, wCount >> 2);
-				index = wCount & ~0x03;
+			if (len >= 4) {
+				readsl(fifo, dst, len >> 2);
+				index = len & ~0x03;
 			}
-			if (wCount & 0x02) {
+			if (len & 0x02) {
 				*(u16*)&dst[index] = musb_readw(fifo, 0);
 				index += 2;
 			}
 		} else {
-			if (wCount >= 2) {
-				readsw(fifo, dst, wCount >> 1);
-				index = wCount & ~0x01;
+			if (len >= 2) {
+				readsw(fifo, dst, len >> 1);
+				index = len & ~0x01;
 			}
 		}
-		if (wCount & 0x01)
+		if (len & 0x01)
 			dst[index] = musb_readb(fifo, 0);
 	} else  {
 		/* byte aligned */
-		readsb(fifo, dst, wCount);
+		readsb(fifo, dst, len);
 	}
 }
 
-- 
1.5.2.3

  reply	other threads:[~2007-08-13 13:48 UTC|newest]

Thread overview: 57+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2007-08-13 13:48 (no subject) Tony Lindgren
2007-08-13 13:48 ` [PATCH 1/52] musb_hdrc: Search and replace pThis with musb Tony Lindgren
2007-08-13 13:48   ` [PATCH 2/52] musb_hdrc: Search and replace pEndPt with hw_ep Tony Lindgren
2007-08-13 13:48     ` [PATCH 3/52] musb_hdrc: Search and replace pEnd with musb_ep when struct musb_ep Tony Lindgren
2007-08-13 13:48       ` [PATCH 4/52] musb_hdrc: Search and replace pEnd with musb_ep when struct musb_hw_ep Tony Lindgren
2007-08-13 13:48         ` [PATCH 5/52] musb_hdrc: Search and replace pRegs with mregs Tony Lindgren
2007-08-13 13:48           ` [PATCH 6/52] musb_hdrc: Search and replace pBase with mbase Tony Lindgren
2007-08-13 13:48             ` [PATCH 7/52] musb_hdrc: Search and replace pSource with src Tony Lindgren
2007-08-13 13:48               ` [PATCH 8/52] musb_hdrc: Search and replace pDest with dst Tony Lindgren
2007-08-13 13:48                 ` [PATCH 9/52] musb_hdrc: Search and replace dwCount with len Tony Lindgren
2007-08-13 13:48                   ` [PATCH 10/52] musb_hdrc: Search and replace wFifoCount with fifo_count Tony Lindgren
2007-08-13 13:48                     ` Tony Lindgren [this message]
2007-08-13 13:48                       ` [PATCH 12/52] musb_hdrc: Search and replace bLocalEnd with epnum Tony Lindgren
2007-08-13 13:48                         ` [PATCH 13/52] musb_hdrc: Search and replace aLocalEnd with endpoints Tony Lindgren
2007-08-13 13:48                           ` [PATCH 14/52] musb_hdrc: Search and replace bEndCount with nr_endpoints Tony Lindgren
2007-08-13 13:48                             ` [PATCH 15/52] musb_hdrc: Search and replace bEndNumber with current_epnum Tony Lindgren
2007-08-13 13:48                               ` [PATCH 16/52] musb_hdrc: Search and replace bEnd0Stage with ep0_stage Tony Lindgren
2007-08-13 13:48                                 ` [PATCH 17/52] musb_hdrc: Search and replace bEnd with epnum Tony Lindgren
2007-08-13 13:48                                   ` [PATCH 18/52] musb_hdrc: Search and replace Lock with lock Tony Lindgren
2007-08-13 13:48                                     ` [PATCH 19/52] musb_hdrc: Search and replace MGC_SelectEnd with musb_ep_select Tony Lindgren
2007-08-13 13:48                                       ` [PATCH 20/52] musb_hdrc: Search and replace _pthis with _musb Tony Lindgren
2007-08-13 13:48                                         ` [PATCH 21/52] musb_hdrc: Search and replace bIsHost with is_host Tony Lindgren
2007-08-13 13:48                                           ` [PATCH 22/52] musb_hdrc: Get rid of old unused MUSB_EpFifoDescriptor Tony Lindgren
2007-08-13 13:48                                             ` [PATCH 23/52] musb_hdrc: Search and replace bIsSharedFifo with is_shared_fifo Tony Lindgren
2007-08-13 13:48                                               ` [PATCH 24/52] musb_hdrc: Search and replace wMaxPacketSizeTx with max_packet_sz_tx Tony Lindgren
2007-08-13 13:49                                                 ` [PATCH 25/52] musb_hdrc: Search and replace wMaxPacketSizeRx with max_packet_sz_rx Tony Lindgren
2007-08-13 13:49                                                   ` [PATCH 26/52] musb_hdrc: Search and replace pDmaController with dma_controller Tony Lindgren
2007-08-13 13:49                                                     ` [PATCH 27/52] musb_hdrc: Search and replace bIsMultipoint with is_multipoint Tony Lindgren
2007-08-13 13:49                                                       ` [PATCH 28/52] musb_hdrc: Search and replace bIgnoreDisconnect with ignore_disconnect Tony Lindgren
2007-08-13 13:49                                                         ` [PATCH 29/52] musb_hdrc: Search and replace bBulkSplit with bulk_split Tony Lindgren
2007-08-13 13:49                                                           ` [PATCH 30/52] musb_hdrc: Search and replace bBulkCombine with bulk_combine Tony Lindgren
2007-08-13 13:49                                                             ` [PATCH 31/52] musb_hdrc: Search and replace bAddress with address Tony Lindgren
2007-08-13 13:49                                                               ` [PATCH 32/52] musb_hdrc: Search and replace bTestModeValue with test_mode_nr Tony Lindgren
2007-08-13 13:49                                                                 ` [PATCH 33/52] musb_hdrc: Search and replace bTestMode with test_mode Tony Lindgren
2007-08-13 13:49                                                                   ` [PATCH 34/52] musb_hdrc: Search and replace pGadgetDriver with gadget_driver Tony Lindgren
2007-08-13 13:49                                                                     ` [PATCH 35/52] musb_hdrc: Search and replace bDelayPortPowerOff with delay_port_power_off Tony Lindgren
2007-08-13 13:49                                                                       ` [PATCH 36/52] musb_hdrc: Search and replace pProcEntry with proc_entry Tony Lindgren
2007-08-13 13:49                                                                         ` [PATCH 37/52] musb_hdrc: Search and replace pPrivateData with private_data Tony Lindgren
2007-08-13 13:49                                                                           ` [PATCH 38/52] musb_hdrc: Search and replace dwMaxLength with max_len Tony Lindgren
2007-08-13 13:49                                                                             ` [PATCH 39/52] musb_hdrc: Search and replace dwActualLength with actual_len Tony Lindgren
2007-08-13 13:49                                                                               ` [PATCH 40/52] musb_hdrc: Search and replace bStatus with status Tony Lindgren
2007-08-13 13:49                                                                                 ` [PATCH 41/52] musb_hdrc: Search and replace bDesiredMode with desired_mode Tony Lindgren
2007-08-13 13:49                                                                                   ` [PATCH 42/52] musb_hdrc: Search and replace bMode with mode Tony Lindgren
2007-08-13 13:49                                                                                     ` [PATCH 43/52] musb_hdrc: Search and replace MGC_pfDmaProgramChannel with dma_program_channel Tony Lindgren
2007-08-13 13:49                                                                                       ` [PATCH 44/52] musb_hdrc: Search and replace pControlRequest with ctrlrequest Tony Lindgren
2007-08-13 13:49                                                                                         ` [PATCH 45/52] musb_hdrc: Search and replace bResult with result Tony Lindgren
2007-08-13 13:49                                                                                           ` [PATCH 46/52] musb_hdrc: Search and replace bSetAddress with set_address Tony Lindgren
2007-08-13 13:49                                                                                             ` [PATCH 47/52] musb_hdrc: Search and replace bRecip with recip Tony Lindgren
2007-08-13 13:49                                                                                               ` [PATCH 48/52] musb_hdrc: Search and replace pRequest with request Tony Lindgren
2007-08-13 13:49                                                                                                 ` [PATCH 49/52] musb_hdrc: Search and replace wCsrVal with csr Tony Lindgren
2007-08-13 13:49                                                                                                   ` [PATCH 50/52] musb_hdrc: Search and replace bTx with tx Tony Lindgren
2007-08-13 13:49                                                                                                     ` [PATCH 51/52] musb_hdrc: Search and replace wPacketSize with packet_sz Tony Lindgren
2007-08-13 13:49                                                                                                       ` [PATCH 52/52] musb_hdrc: Search and replace channelNum with chnum Tony Lindgren
2007-08-14  9:23         ` [PATCH 4/52] musb_hdrc: Search and replace pEnd with musb_ep when struct musb_hw_ep Tony Lindgren
2007-08-13 13:58 ` (no subject) Felipe Balbi
2007-08-14  8:06 ` musb CaMeLcAsEnOmOre (was: (no subject)) David Brownell
2007-08-14  8:55   ` Tony Lindgren

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1187012995338-git-send-email-tony@atomide.com \
    --to=tony@atomide.com \
    --cc=linux-omap-open-source@linux.omap.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.