From mboxrd@z Thu Jan  1 00:00:00 1970
From: Marek Vasut <marex@denx.de>
Date: Thu, 29 Nov 2018 12:28:38 +0100
Subject: [U-Boot] [PATCH v5 3/4] arm: socfpga: stratix10: Add Stratix10
 FPGA into FPGA device table
In-Reply-To: <1543484415-26499-4-git-send-email-chee.hong.ang@intel.com>
References: <1543484415-26499-1-git-send-email-chee.hong.ang@intel.com>
 <1543484415-26499-4-git-send-email-chee.hong.ang@intel.com>
Message-ID: <11f9c66a-04a5-ff1f-9b04-6ca6b4e6c45c@denx.de>
List-Id: <u-boot.lists.denx.de>
MIME-Version: 1.0
Content-Type: text/plain; charset="us-ascii"
Content-Transfer-Encoding: 7bit
To: u-boot@lists.denx.de

On 11/29/2018 10:40 AM, chee.hong.ang at intel.com wrote:
> From: "Ang, Chee Hong" <chee.hong.ang@intel.com>
> 
> Enable 'fpga' command in u-boot. User will be able to use the FPGA
> command to program the FPGA on Stratix10 SoC.
> 
> Signed-off-by: Ang, Chee Hong <chee.hong.ang@intel.com>
> ---
>  arch/arm/mach-socfpga/Makefile                   |  4 ++
>  arch/arm/mach-socfpga/fpga_device.c              | 59 ++++++++++++++++++++++++
>  arch/arm/mach-socfpga/include/mach/fpga_device.h | 15 ++++++
>  arch/arm/mach-socfpga/include/mach/misc.h        |  6 ---
>  arch/arm/mach-socfpga/misc.c                     | 31 -------------
>  arch/arm/mach-socfpga/misc_arria10.c             |  1 +
>  arch/arm/mach-socfpga/misc_gen5.c                |  1 +
>  arch/arm/mach-socfpga/misc_s10.c                 |  3 ++
>  drivers/fpga/altera.c                            |  6 +++
>  include/altera.h                                 |  4 ++
>  10 files changed, 93 insertions(+), 37 deletions(-)
>  create mode 100644 arch/arm/mach-socfpga/fpga_device.c
>  create mode 100644 arch/arm/mach-socfpga/include/mach/fpga_device.h
> 
> diff --git a/arch/arm/mach-socfpga/Makefile b/arch/arm/mach-socfpga/Makefile
> index e667204..2ff1b3f 100644
> --- a/arch/arm/mach-socfpga/Makefile
> +++ b/arch/arm/mach-socfpga/Makefile
> @@ -10,6 +10,10 @@ obj-y	+= clock_manager.o
>  obj-y	+= misc.o
>  obj-y	+= reset_manager.o
>  
> +ifdef CONFIG_FPGA
> +obj-y	+= fpga_device.o
> +endif
> +
>  ifdef CONFIG_TARGET_SOCFPGA_GEN5
>  obj-y	+= clock_manager_gen5.o
>  obj-y	+= misc_gen5.o
> diff --git a/arch/arm/mach-socfpga/fpga_device.c b/arch/arm/mach-socfpga/fpga_device.c
> new file mode 100644
> index 0000000..97b27eb
> --- /dev/null
> +++ b/arch/arm/mach-socfpga/fpga_device.c
> @@ -0,0 +1,59 @@
> +// SPDX-License-Identifier: GPL-2.0+
> +/*
> + * Copyright (C) 2018 Intel Corporation <www.intel.com>
> + */
> +
> +#include <common.h>
> +#include <altera.h>
> +
> +#ifdef CONFIG_FPGA_STRATIX10
> +/*
> + * FPGA programming support for SoC FPGA Stratix 10
> + */
> +static Altera_desc altera_fpga[] = {
> +	{
> +		/* Family */
> +		Intel_FPGA_Stratix10,
> +		/* Interface type */
> +		secure_device_manager_mailbox,
> +		/* No limitation as additional data will be ignored */
> +		-1,
> +		/* No device function table */
> +		NULL,
> +		/* Base interface address specified in driver */
> +		NULL,
> +		/* No cookie implementation */
> +		0
> +	},
> +};
> +#else
> +/*
> + * FPGA programming support for SoC FPGA Cyclone V
> + */
> +static Altera_desc altera_fpga[] = {
> +	{
> +		/* Family */
> +		Altera_SoCFPGA,
> +		/* Interface type */
> +		fast_passive_parallel,
> +		/* No limitation as additional data will be ignored */
> +		-1,
> +		/* No device function table */
> +		NULL,
> +		/* Base interface address specified in driver */
> +		NULL,
> +		/* No cookie implementation */
> +		0
> +	},
> +};
> +#endif
> +
> +/* add device descriptor to FPGA device table */
> +void socfpga_fpga_add(void)
> +{
> +	int i;
> +
> +	fpga_init();
> +	for (i = 0; i < ARRAY_SIZE(altera_fpga); i++)
> +		fpga_add(fpga_altera, &altera_fpga[i]);

Why do we need this loop if there's only one entry in the array ?

btw this function could stay in misc.c , the altera_fpga tables could be
in misc_s10.c resp. something for Gen5 IMO, so you won't need another
new file.

-- 
Best regards,
Marek Vasut