* [PULL 00/11] Q800 branch patches
@ 2019-10-28 18:16 Laurent Vivier
2019-10-28 18:16 ` [PULL 01/11] esp: move handle_ti_cmd() cleanup code to esp_do_dma() Laurent Vivier
` (12 more replies)
0 siblings, 13 replies; 27+ messages in thread
From: Laurent Vivier @ 2019-10-28 18:16 UTC (permalink / raw)
To: qemu-devel
Cc: Fam Zheng, Kevin Wolf, qemu-block, Jason Wang, Laurent Vivier,
Max Reitz, Paolo Bonzini
The following changes since commit 7bc8f9734213b76e76631a483be13d6737c2adbc:
Merge remote-tracking branch 'remotes/pmaydell/tags/pull-target-arm-20191025' into staging (2019-10-25 13:12:16 +0100)
are available in the Git repository at:
git://github.com/vivier/qemu-m68k.git tags/q800-branch-pull-request
for you to fetch changes up to f7d85525f14b99aaa7bf561c9f3cf11c85a080c9:
BootLinuxConsoleTest: Test the Quadra 800 (2019-10-28 19:07:22 +0100)
----------------------------------------------------------------
Add Macintosh Quadra 800 machine in hw/m68k
----------------------------------------------------------------
Laurent Vivier (10):
esp: move handle_ti_cmd() cleanup code to esp_do_dma().
esp: move get_cmd() post-DMA code to get_cmd_cb()
esp: add pseudo-DMA as used by Macintosh
dp8393x: manage big endian bus
hw/m68k: add VIA support
hw/m68k: implement ADB bus support for via
hw/m68k: add Nubus support
hw/m68k: add Nubus macfb video card
hw/m68k: add a dummy SWIM floppy controller
hw/m68k: define Macintosh Quadra 800
Philippe Mathieu-Daudé (1):
BootLinuxConsoleTest: Test the Quadra 800
default-configs/m68k-softmmu.mak | 1 +
hw/m68k/bootinfo.h | 114 +++
include/hw/block/swim.h | 76 ++
include/hw/display/macfb.h | 64 ++
include/hw/misc/mac_via.h | 115 +++
include/hw/nubus/mac-nubus-bridge.h | 24 +
include/hw/nubus/nubus.h | 69 ++
include/hw/scsi/esp.h | 15 +
arch_init.c | 4 +
hw/block/swim.c | 489 +++++++++++++
hw/display/macfb.c | 477 ++++++++++++
hw/m68k/q800.c | 401 ++++++++++
hw/misc/mac_via.c | 964 +++++++++++++++++++++++++
hw/net/dp8393x.c | 88 ++-
hw/nubus/mac-nubus-bridge.c | 45 ++
hw/nubus/nubus-bridge.c | 34 +
hw/nubus/nubus-bus.c | 111 +++
hw/nubus/nubus-device.c | 215 ++++++
hw/scsi/esp.c | 336 ++++++++-
vl.c | 3 +-
MAINTAINERS | 14 +
hw/Kconfig | 1 +
hw/Makefile.objs | 1 +
hw/block/Kconfig | 3 +
hw/block/Makefile.objs | 1 +
hw/display/Kconfig | 5 +
hw/display/Makefile.objs | 1 +
hw/m68k/Kconfig | 10 +
hw/m68k/Makefile.objs | 1 +
hw/misc/Kconfig | 5 +
hw/misc/Makefile.objs | 1 +
hw/nubus/Kconfig | 2 +
hw/nubus/Makefile.objs | 4 +
qemu-options.hx | 2 +-
tests/acceptance/boot_linux_console.py | 24 +
35 files changed, 3659 insertions(+), 61 deletions(-)
create mode 100644 hw/m68k/bootinfo.h
create mode 100644 include/hw/block/swim.h
create mode 100644 include/hw/display/macfb.h
create mode 100644 include/hw/misc/mac_via.h
create mode 100644 include/hw/nubus/mac-nubus-bridge.h
create mode 100644 include/hw/nubus/nubus.h
create mode 100644 hw/block/swim.c
create mode 100644 hw/display/macfb.c
create mode 100644 hw/m68k/q800.c
create mode 100644 hw/misc/mac_via.c
create mode 100644 hw/nubus/mac-nubus-bridge.c
create mode 100644 hw/nubus/nubus-bridge.c
create mode 100644 hw/nubus/nubus-bus.c
create mode 100644 hw/nubus/nubus-device.c
create mode 100644 hw/nubus/Kconfig
create mode 100644 hw/nubus/Makefile.objs
--
2.21.0
^ permalink raw reply [flat|nested] 27+ messages in thread
* [PULL 01/11] esp: move handle_ti_cmd() cleanup code to esp_do_dma().
2019-10-28 18:16 [PULL 00/11] Q800 branch patches Laurent Vivier
@ 2019-10-28 18:16 ` Laurent Vivier
2019-10-28 18:16 ` [PULL 02/11] esp: move get_cmd() post-DMA code to get_cmd_cb() Laurent Vivier
` (11 subsequent siblings)
12 siblings, 0 replies; 27+ messages in thread
From: Laurent Vivier @ 2019-10-28 18:16 UTC (permalink / raw)
To: qemu-devel
Cc: Fam Zheng, Kevin Wolf, qemu-block, Jason Wang, Laurent Vivier,
Max Reitz, Paolo Bonzini
To prepare following patches move do_cmd and DMA special case
from handle_ti() to esp_do_dma().
This part of the code must be only executed with real DMA, not with
pseudo-DMA. And PDMA is detected in esp_do_dma(), so move this part
of the code in esp_do_dma(). We keep the code in handle_ti_cmd()
in the case no DMA is done.
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20191026164546.30020-2-laurent@vivier.eu>
---
hw/scsi/esp.c | 12 ++++++++++--
1 file changed, 10 insertions(+), 2 deletions(-)
diff --git a/hw/scsi/esp.c b/hw/scsi/esp.c
index 841d79b60e..09b28cba17 100644
--- a/hw/scsi/esp.c
+++ b/hw/scsi/esp.c
@@ -249,10 +249,19 @@ static void esp_do_dma(ESPState *s)
len = s->dma_left;
if (s->do_cmd) {
+ /*
+ * handle_ti_cmd() case: esp_do_dma() is called only from
+ * handle_ti_cmd() with do_cmd != NULL (see the assert())
+ */
trace_esp_do_dma(s->cmdlen, len);
assert (s->cmdlen <= sizeof(s->cmdbuf) &&
len <= sizeof(s->cmdbuf) - s->cmdlen);
s->dma_memory_read(s->dma_opaque, &s->cmdbuf[s->cmdlen], len);
+ trace_esp_handle_ti_cmd(s->cmdlen);
+ s->ti_size = 0;
+ s->cmdlen = 0;
+ s->do_cmd = 0;
+ do_cmd(s, s->cmdbuf);
return;
}
if (s->async_len == 0) {
@@ -373,8 +382,7 @@ static void handle_ti(ESPState *s)
s->dma_left = minlen;
s->rregs[ESP_RSTAT] &= ~STAT_TC;
esp_do_dma(s);
- }
- if (s->do_cmd) {
+ } else if (s->do_cmd) {
trace_esp_handle_ti_cmd(s->cmdlen);
s->ti_size = 0;
s->cmdlen = 0;
--
2.21.0
^ permalink raw reply related [flat|nested] 27+ messages in thread
* [PULL 02/11] esp: move get_cmd() post-DMA code to get_cmd_cb()
2019-10-28 18:16 [PULL 00/11] Q800 branch patches Laurent Vivier
2019-10-28 18:16 ` [PULL 01/11] esp: move handle_ti_cmd() cleanup code to esp_do_dma() Laurent Vivier
@ 2019-10-28 18:16 ` Laurent Vivier
2019-10-28 18:16 ` [PULL 03/11] esp: add pseudo-DMA as used by Macintosh Laurent Vivier
` (10 subsequent siblings)
12 siblings, 0 replies; 27+ messages in thread
From: Laurent Vivier @ 2019-10-28 18:16 UTC (permalink / raw)
To: qemu-devel
Cc: Fam Zheng, Kevin Wolf, qemu-block, Jason Wang, Laurent Vivier,
Max Reitz, Paolo Bonzini, Philippe Mathieu-Daudé
This will be needed to implement pseudo-DMA
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20191026164546.30020-3-laurent@vivier.eu>
---
hw/scsi/esp.c | 46 +++++++++++++++++++++++++++++-----------------
1 file changed, 29 insertions(+), 17 deletions(-)
diff --git a/hw/scsi/esp.c b/hw/scsi/esp.c
index 09b28cba17..0230ede21d 100644
--- a/hw/scsi/esp.c
+++ b/hw/scsi/esp.c
@@ -84,6 +84,34 @@ void esp_request_cancelled(SCSIRequest *req)
}
}
+static int get_cmd_cb(ESPState *s)
+{
+ int target;
+
+ target = s->wregs[ESP_WBUSID] & BUSID_DID;
+
+ s->ti_size = 0;
+ s->ti_rptr = 0;
+ s->ti_wptr = 0;
+
+ if (s->current_req) {
+ /* Started a new command before the old one finished. Cancel it. */
+ scsi_req_cancel(s->current_req);
+ s->async_len = 0;
+ }
+
+ s->current_dev = scsi_device_find(&s->bus, 0, target, 0);
+ if (!s->current_dev) {
+ /* No such drive */
+ s->rregs[ESP_RSTAT] = 0;
+ s->rregs[ESP_RINTR] = INTR_DC;
+ s->rregs[ESP_RSEQ] = SEQ_0;
+ esp_raise_irq(s);
+ return -1;
+ }
+ return 0;
+}
+
static uint32_t get_cmd(ESPState *s, uint8_t *buf, uint8_t buflen)
{
uint32_t dmalen;
@@ -108,23 +136,7 @@ static uint32_t get_cmd(ESPState *s, uint8_t *buf, uint8_t buflen)
}
trace_esp_get_cmd(dmalen, target);
- s->ti_size = 0;
- s->ti_rptr = 0;
- s->ti_wptr = 0;
-
- if (s->current_req) {
- /* Started a new command before the old one finished. Cancel it. */
- scsi_req_cancel(s->current_req);
- s->async_len = 0;
- }
-
- s->current_dev = scsi_device_find(&s->bus, 0, target, 0);
- if (!s->current_dev) {
- // No such drive
- s->rregs[ESP_RSTAT] = 0;
- s->rregs[ESP_RINTR] = INTR_DC;
- s->rregs[ESP_RSEQ] = SEQ_0;
- esp_raise_irq(s);
+ if (get_cmd_cb(s) < 0) {
return 0;
}
return dmalen;
--
2.21.0
^ permalink raw reply related [flat|nested] 27+ messages in thread
* [PULL 03/11] esp: add pseudo-DMA as used by Macintosh
2019-10-28 18:16 [PULL 00/11] Q800 branch patches Laurent Vivier
2019-10-28 18:16 ` [PULL 01/11] esp: move handle_ti_cmd() cleanup code to esp_do_dma() Laurent Vivier
2019-10-28 18:16 ` [PULL 02/11] esp: move get_cmd() post-DMA code to get_cmd_cb() Laurent Vivier
@ 2019-10-28 18:16 ` Laurent Vivier
2019-10-28 18:16 ` [PULL 04/11] dp8393x: manage big endian bus Laurent Vivier
` (9 subsequent siblings)
12 siblings, 0 replies; 27+ messages in thread
From: Laurent Vivier @ 2019-10-28 18:16 UTC (permalink / raw)
To: qemu-devel
Cc: Fam Zheng, Kevin Wolf, qemu-block, Jason Wang, Mark Cave-Ayland,
Laurent Vivier, Max Reitz, Paolo Bonzini,
Dr . David Alan Gilbert
There is no DMA in Quadra 800, so the CPU reads/writes the data from the
PDMA register (offset 0x100, ESP_PDMA in hw/m68k/q800.c) and copies them
to/from the memory.
There is a nice assembly loop in the kernel to do that, see
linux/drivers/scsi/mac_esp.c:MAC_ESP_PDMA_LOOP().
The start of the transfer is triggered by the DREQ interrupt (see linux
mac_esp_send_pdma_cmd()), the CPU polls on the IRQ flag to start the
transfer after a SCSI command has been sent (in Quadra 800 it goes
through the VIA2, the via2-irq line and the vIFR register)
The Macintosh hardware includes hardware handshaking to prevent the CPU
from reading invalid data or writing data faster than the peripheral
device can accept it.
This is the "blind mode", and from the doc:
"Approximate maximum SCSI transfer rates within a blocks are 1.4 MB per
second for blind transfers in the Macintosh II"
Some references can be found in:
Apple Macintosh Family Hardware Reference, ISBN 0-201-19255-1
Guide to the Macintosh Family Hardware, ISBN-0-201-52405-8
Acked-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Co-developed-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20191026164546.30020-4-laurent@vivier.eu>
---
include/hw/scsi/esp.h | 15 +++
hw/scsi/esp.c | 278 ++++++++++++++++++++++++++++++++++++++++--
2 files changed, 284 insertions(+), 9 deletions(-)
diff --git a/include/hw/scsi/esp.h b/include/hw/scsi/esp.h
index adab63d1c9..6ba47dac41 100644
--- a/include/hw/scsi/esp.h
+++ b/include/hw/scsi/esp.h
@@ -14,10 +14,18 @@ typedef void (*ESPDMAMemoryReadWriteFunc)(void *opaque, uint8_t *buf, int len);
typedef struct ESPState ESPState;
+enum pdma_origin_id {
+ PDMA,
+ TI,
+ CMD,
+ ASYNC,
+};
+
struct ESPState {
uint8_t rregs[ESP_REGS];
uint8_t wregs[ESP_REGS];
qemu_irq irq;
+ qemu_irq irq_data;
uint8_t chip_id;
bool tchi_written;
int32_t ti_size;
@@ -48,6 +56,12 @@ struct ESPState {
ESPDMAMemoryReadWriteFunc dma_memory_write;
void *dma_opaque;
void (*dma_cb)(ESPState *s);
+ uint8_t pdma_buf[32];
+ int pdma_origin;
+ uint32_t pdma_len;
+ uint32_t pdma_start;
+ uint32_t pdma_cur;
+ void (*pdma_cb)(ESPState *s);
};
#define TYPE_ESP "esp"
@@ -59,6 +73,7 @@ typedef struct {
/*< public >*/
MemoryRegion iomem;
+ MemoryRegion pdma;
uint32_t it_shift;
ESPState esp;
} SysBusESPState;
diff --git a/hw/scsi/esp.c b/hw/scsi/esp.c
index 0230ede21d..f8fc30cccb 100644
--- a/hw/scsi/esp.c
+++ b/hw/scsi/esp.c
@@ -38,6 +38,8 @@
* http://www.ibiblio.org/pub/historic-linux/early-ports/Sparc/NCR/NCR89C100.txt
* and
* http://www.ibiblio.org/pub/historic-linux/early-ports/Sparc/NCR/NCR53C9X.txt
+ *
+ * On Macintosh Quadra it is a NCR53C96.
*/
static void esp_raise_irq(ESPState *s)
@@ -58,6 +60,16 @@ static void esp_lower_irq(ESPState *s)
}
}
+static void esp_raise_drq(ESPState *s)
+{
+ qemu_irq_raise(s->irq_data);
+}
+
+static void esp_lower_drq(ESPState *s)
+{
+ qemu_irq_lower(s->irq_data);
+}
+
void esp_dma_enable(ESPState *s, int irq, int level)
{
if (level) {
@@ -84,6 +96,30 @@ void esp_request_cancelled(SCSIRequest *req)
}
}
+static void set_pdma(ESPState *s, enum pdma_origin_id origin,
+ uint32_t index, uint32_t len)
+{
+ s->pdma_origin = origin;
+ s->pdma_start = index;
+ s->pdma_cur = index;
+ s->pdma_len = len;
+}
+
+static uint8_t *get_pdma_buf(ESPState *s)
+{
+ switch (s->pdma_origin) {
+ case PDMA:
+ return s->pdma_buf;
+ case TI:
+ return s->ti_buf;
+ case CMD:
+ return s->cmdbuf;
+ case ASYNC:
+ return s->async_buf;
+ }
+ return NULL;
+}
+
static int get_cmd_cb(ESPState *s)
{
int target;
@@ -125,7 +161,14 @@ static uint32_t get_cmd(ESPState *s, uint8_t *buf, uint8_t buflen)
if (dmalen > buflen) {
return 0;
}
- s->dma_memory_read(s->dma_opaque, buf, dmalen);
+ if (s->dma_memory_read) {
+ s->dma_memory_read(s->dma_opaque, buf, dmalen);
+ } else {
+ memcpy(s->pdma_buf, buf, dmalen);
+ set_pdma(s, PDMA, 0, dmalen);
+ esp_raise_drq(s);
+ return 0;
+ }
} else {
dmalen = s->ti_size;
if (dmalen > TI_BUFSZ) {
@@ -177,6 +220,16 @@ static void do_cmd(ESPState *s, uint8_t *buf)
do_busid_cmd(s, &buf[1], busid);
}
+static void satn_pdma_cb(ESPState *s)
+{
+ if (get_cmd_cb(s) < 0) {
+ return;
+ }
+ if (s->pdma_cur != s->pdma_start) {
+ do_cmd(s, get_pdma_buf(s) + s->pdma_start);
+ }
+}
+
static void handle_satn(ESPState *s)
{
uint8_t buf[32];
@@ -186,11 +239,22 @@ static void handle_satn(ESPState *s)
s->dma_cb = handle_satn;
return;
}
+ s->pdma_cb = satn_pdma_cb;
len = get_cmd(s, buf, sizeof(buf));
if (len)
do_cmd(s, buf);
}
+static void s_without_satn_pdma_cb(ESPState *s)
+{
+ if (get_cmd_cb(s) < 0) {
+ return;
+ }
+ if (s->pdma_cur != s->pdma_start) {
+ do_busid_cmd(s, get_pdma_buf(s) + s->pdma_start, 0);
+ }
+}
+
static void handle_s_without_atn(ESPState *s)
{
uint8_t buf[32];
@@ -200,18 +264,36 @@ static void handle_s_without_atn(ESPState *s)
s->dma_cb = handle_s_without_atn;
return;
}
+ s->pdma_cb = s_without_satn_pdma_cb;
len = get_cmd(s, buf, sizeof(buf));
if (len) {
do_busid_cmd(s, buf, 0);
}
}
+static void satn_stop_pdma_cb(ESPState *s)
+{
+ if (get_cmd_cb(s) < 0) {
+ return;
+ }
+ s->cmdlen = s->pdma_cur - s->pdma_start;
+ if (s->cmdlen) {
+ trace_esp_handle_satn_stop(s->cmdlen);
+ s->do_cmd = 1;
+ s->rregs[ESP_RSTAT] = STAT_TC | STAT_CD;
+ s->rregs[ESP_RINTR] = INTR_BS | INTR_FC;
+ s->rregs[ESP_RSEQ] = SEQ_CD;
+ esp_raise_irq(s);
+ }
+}
+
static void handle_satn_stop(ESPState *s)
{
if (s->dma && !s->dma_enabled) {
s->dma_cb = handle_satn_stop;
return;
}
+ s->pdma_cb = satn_stop_pdma_cb;;
s->cmdlen = get_cmd(s, s->cmdbuf, sizeof(s->cmdbuf));
if (s->cmdlen) {
trace_esp_handle_satn_stop(s->cmdlen);
@@ -223,16 +305,31 @@ static void handle_satn_stop(ESPState *s)
}
}
+static void write_response_pdma_cb(ESPState *s)
+{
+ s->rregs[ESP_RSTAT] = STAT_TC | STAT_ST;
+ s->rregs[ESP_RINTR] = INTR_BS | INTR_FC;
+ s->rregs[ESP_RSEQ] = SEQ_CD;
+ esp_raise_irq(s);
+}
+
static void write_response(ESPState *s)
{
trace_esp_write_response(s->status);
s->ti_buf[0] = s->status;
s->ti_buf[1] = 0;
if (s->dma) {
- s->dma_memory_write(s->dma_opaque, s->ti_buf, 2);
- s->rregs[ESP_RSTAT] = STAT_TC | STAT_ST;
- s->rregs[ESP_RINTR] = INTR_BS | INTR_FC;
- s->rregs[ESP_RSEQ] = SEQ_CD;
+ if (s->dma_memory_write) {
+ s->dma_memory_write(s->dma_opaque, s->ti_buf, 2);
+ s->rregs[ESP_RSTAT] = STAT_TC | STAT_ST;
+ s->rregs[ESP_RINTR] = INTR_BS | INTR_FC;
+ s->rregs[ESP_RSEQ] = SEQ_CD;
+ } else {
+ set_pdma(s, TI, 0, 2);
+ s->pdma_cb = write_response_pdma_cb;
+ esp_raise_drq(s);
+ return;
+ }
} else {
s->ti_size = 2;
s->ti_rptr = 0;
@@ -254,6 +351,41 @@ static void esp_dma_done(ESPState *s)
esp_raise_irq(s);
}
+static void do_dma_pdma_cb(ESPState *s)
+{
+ int to_device = (s->ti_size < 0);
+ int len = s->pdma_cur - s->pdma_start;
+ if (s->do_cmd) {
+ s->ti_size = 0;
+ s->cmdlen = 0;
+ s->do_cmd = 0;
+ do_cmd(s, s->cmdbuf);
+ return;
+ }
+ s->dma_left -= len;
+ s->async_buf += len;
+ s->async_len -= len;
+ if (to_device) {
+ s->ti_size += len;
+ } else {
+ s->ti_size -= len;
+ }
+ if (s->async_len == 0) {
+ scsi_req_continue(s->current_req);
+ /*
+ * If there is still data to be read from the device then
+ * complete the DMA operation immediately. Otherwise defer
+ * until the scsi layer has completed.
+ */
+ if (to_device || s->dma_left != 0 || s->ti_size == 0) {
+ return;
+ }
+ }
+
+ /* Partially filled a scsi buffer. Complete immediately. */
+ esp_dma_done(s);
+}
+
static void esp_do_dma(ESPState *s)
{
uint32_t len;
@@ -268,7 +400,14 @@ static void esp_do_dma(ESPState *s)
trace_esp_do_dma(s->cmdlen, len);
assert (s->cmdlen <= sizeof(s->cmdbuf) &&
len <= sizeof(s->cmdbuf) - s->cmdlen);
- s->dma_memory_read(s->dma_opaque, &s->cmdbuf[s->cmdlen], len);
+ if (s->dma_memory_read) {
+ s->dma_memory_read(s->dma_opaque, &s->cmdbuf[s->cmdlen], len);
+ } else {
+ set_pdma(s, CMD, s->cmdlen, len);
+ s->pdma_cb = do_dma_pdma_cb;
+ esp_raise_drq(s);
+ return;
+ }
trace_esp_handle_ti_cmd(s->cmdlen);
s->ti_size = 0;
s->cmdlen = 0;
@@ -285,9 +424,23 @@ static void esp_do_dma(ESPState *s)
}
to_device = (s->ti_size < 0);
if (to_device) {
- s->dma_memory_read(s->dma_opaque, s->async_buf, len);
+ if (s->dma_memory_read) {
+ s->dma_memory_read(s->dma_opaque, s->async_buf, len);
+ } else {
+ set_pdma(s, ASYNC, 0, len);
+ s->pdma_cb = do_dma_pdma_cb;
+ esp_raise_drq(s);
+ return;
+ }
} else {
- s->dma_memory_write(s->dma_opaque, s->async_buf, len);
+ if (s->dma_memory_write) {
+ s->dma_memory_write(s->dma_opaque, s->async_buf, len);
+ } else {
+ set_pdma(s, ASYNC, 0, len);
+ s->pdma_cb = do_dma_pdma_cb;
+ esp_raise_drq(s);
+ return;
+ }
}
s->dma_left -= len;
s->async_buf += len;
@@ -421,6 +574,7 @@ void esp_hard_reset(ESPState *s)
static void esp_soft_reset(ESPState *s)
{
qemu_irq_lower(s->irq);
+ qemu_irq_lower(s->irq_data);
esp_hard_reset(s);
}
@@ -610,6 +764,28 @@ static bool esp_mem_accepts(void *opaque, hwaddr addr,
return (size == 1) || (is_write && size == 4);
}
+static bool esp_pdma_needed(void *opaque)
+{
+ ESPState *s = opaque;
+ return s->dma_memory_read == NULL && s->dma_memory_write == NULL &&
+ s->dma_enabled;
+}
+
+static const VMStateDescription vmstate_esp_pdma = {
+ .name = "esp/pdma",
+ .version_id = 1,
+ .minimum_version_id = 1,
+ .needed = esp_pdma_needed,
+ .fields = (VMStateField[]) {
+ VMSTATE_BUFFER(pdma_buf, ESPState),
+ VMSTATE_INT32(pdma_origin, ESPState),
+ VMSTATE_UINT32(pdma_len, ESPState),
+ VMSTATE_UINT32(pdma_start, ESPState),
+ VMSTATE_UINT32(pdma_cur, ESPState),
+ VMSTATE_END_OF_LIST()
+ }
+};
+
const VMStateDescription vmstate_esp = {
.name ="esp",
.version_id = 4,
@@ -631,6 +807,10 @@ const VMStateDescription vmstate_esp = {
VMSTATE_UINT32(do_cmd, ESPState),
VMSTATE_UINT32(dma_left, ESPState),
VMSTATE_END_OF_LIST()
+ },
+ .subsections = (const VMStateDescription * []) {
+ &vmstate_esp_pdma,
+ NULL
}
};
@@ -661,6 +841,82 @@ static const MemoryRegionOps sysbus_esp_mem_ops = {
.valid.accepts = esp_mem_accepts,
};
+static void sysbus_esp_pdma_write(void *opaque, hwaddr addr,
+ uint64_t val, unsigned int size)
+{
+ SysBusESPState *sysbus = opaque;
+ ESPState *s = &sysbus->esp;
+ uint32_t dmalen;
+ uint8_t *buf = get_pdma_buf(s);
+
+ dmalen = s->rregs[ESP_TCLO];
+ dmalen |= s->rregs[ESP_TCMID] << 8;
+ dmalen |= s->rregs[ESP_TCHI] << 16;
+ if (dmalen == 0 || s->pdma_len == 0) {
+ return;
+ }
+ switch (size) {
+ case 1:
+ buf[s->pdma_cur++] = val;
+ s->pdma_len--;
+ dmalen--;
+ break;
+ case 2:
+ buf[s->pdma_cur++] = val >> 8;
+ buf[s->pdma_cur++] = val;
+ s->pdma_len -= 2;
+ dmalen -= 2;
+ break;
+ }
+ s->rregs[ESP_TCLO] = dmalen & 0xff;
+ s->rregs[ESP_TCMID] = dmalen >> 8;
+ s->rregs[ESP_TCHI] = dmalen >> 16;
+ if (s->pdma_len == 0 && s->pdma_cb) {
+ esp_lower_drq(s);
+ s->pdma_cb(s);
+ s->pdma_cb = NULL;
+ }
+}
+
+static uint64_t sysbus_esp_pdma_read(void *opaque, hwaddr addr,
+ unsigned int size)
+{
+ SysBusESPState *sysbus = opaque;
+ ESPState *s = &sysbus->esp;
+ uint8_t *buf = get_pdma_buf(s);
+ uint64_t val = 0;
+
+ if (s->pdma_len == 0) {
+ return 0;
+ }
+ switch (size) {
+ case 1:
+ val = buf[s->pdma_cur++];
+ s->pdma_len--;
+ break;
+ case 2:
+ val = buf[s->pdma_cur++];
+ val = (val << 8) | buf[s->pdma_cur++];
+ s->pdma_len -= 2;
+ break;
+ }
+
+ if (s->pdma_len == 0 && s->pdma_cb) {
+ esp_lower_drq(s);
+ s->pdma_cb(s);
+ s->pdma_cb = NULL;
+ }
+ return val;
+}
+
+static const MemoryRegionOps sysbus_esp_pdma_ops = {
+ .read = sysbus_esp_pdma_read,
+ .write = sysbus_esp_pdma_write,
+ .endianness = DEVICE_NATIVE_ENDIAN,
+ .valid.min_access_size = 1,
+ .valid.max_access_size = 2,
+};
+
static const struct SCSIBusInfo esp_scsi_info = {
.tcq = false,
.max_target = ESP_MAX_DEVS,
@@ -693,12 +949,16 @@ static void sysbus_esp_realize(DeviceState *dev, Error **errp)
ESPState *s = &sysbus->esp;
sysbus_init_irq(sbd, &s->irq);
+ sysbus_init_irq(sbd, &s->irq_data);
assert(sysbus->it_shift != -1);
s->chip_id = TCHI_FAS100A;
memory_region_init_io(&sysbus->iomem, OBJECT(sysbus), &sysbus_esp_mem_ops,
- sysbus, "esp", ESP_REGS << sysbus->it_shift);
+ sysbus, "esp-regs", ESP_REGS << sysbus->it_shift);
sysbus_init_mmio(sbd, &sysbus->iomem);
+ memory_region_init_io(&sysbus->pdma, OBJECT(sysbus), &sysbus_esp_pdma_ops,
+ sysbus, "esp-pdma", 2);
+ sysbus_init_mmio(sbd, &sysbus->pdma);
qdev_init_gpio_in(dev, sysbus_esp_gpio_demux, 2);
--
2.21.0
^ permalink raw reply related [flat|nested] 27+ messages in thread
* [PULL 04/11] dp8393x: manage big endian bus
2019-10-28 18:16 [PULL 00/11] Q800 branch patches Laurent Vivier
` (2 preceding siblings ...)
2019-10-28 18:16 ` [PULL 03/11] esp: add pseudo-DMA as used by Macintosh Laurent Vivier
@ 2019-10-28 18:16 ` Laurent Vivier
2019-10-28 18:16 ` [PULL 05/11] hw/m68k: add VIA support Laurent Vivier
` (8 subsequent siblings)
12 siblings, 0 replies; 27+ messages in thread
From: Laurent Vivier @ 2019-10-28 18:16 UTC (permalink / raw)
To: qemu-devel
Cc: Fam Zheng, Kevin Wolf, qemu-block, Jason Wang, Laurent Vivier,
Max Reitz, Hervé Poussineau, Paolo Bonzini,
Philippe Mathieu-Daudé
This is needed by Quadra 800, this card can run on little-endian
or big-endian bus.
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Tested-by: Hervé Poussineau <hpoussin@reactos.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Hervé Poussineau <hpoussin@reactos.org>
Message-Id: <20191026164546.30020-5-laurent@vivier.eu>
---
hw/net/dp8393x.c | 88 +++++++++++++++++++++++++++++++-----------------
1 file changed, 57 insertions(+), 31 deletions(-)
diff --git a/hw/net/dp8393x.c b/hw/net/dp8393x.c
index a5678e11fa..693e244ce6 100644
--- a/hw/net/dp8393x.c
+++ b/hw/net/dp8393x.c
@@ -153,6 +153,7 @@ typedef struct dp8393xState {
/* Hardware */
uint8_t it_shift;
+ bool big_endian;
qemu_irq irq;
#ifdef DEBUG_SONIC
int irq_level;
@@ -223,6 +224,29 @@ static uint32_t dp8393x_wt(dp8393xState *s)
return s->regs[SONIC_WT1] << 16 | s->regs[SONIC_WT0];
}
+static uint16_t dp8393x_get(dp8393xState *s, int width, uint16_t *base,
+ int offset)
+{
+ uint16_t val;
+
+ if (s->big_endian) {
+ val = be16_to_cpu(base[offset * width + width - 1]);
+ } else {
+ val = le16_to_cpu(base[offset * width]);
+ }
+ return val;
+}
+
+static void dp8393x_put(dp8393xState *s, int width, uint16_t *base, int offset,
+ uint16_t val)
+{
+ if (s->big_endian) {
+ base[offset * width + width - 1] = cpu_to_be16(val);
+ } else {
+ base[offset * width] = cpu_to_le16(val);
+ }
+}
+
static void dp8393x_update_irq(dp8393xState *s)
{
int level = (s->regs[SONIC_IMR] & s->regs[SONIC_ISR]) ? 1 : 0;
@@ -254,12 +278,12 @@ static void dp8393x_do_load_cam(dp8393xState *s)
/* Fill current entry */
address_space_rw(&s->as, dp8393x_cdp(s),
MEMTXATTRS_UNSPECIFIED, (uint8_t *)data, size, 0);
- s->cam[index][0] = data[1 * width] & 0xff;
- s->cam[index][1] = data[1 * width] >> 8;
- s->cam[index][2] = data[2 * width] & 0xff;
- s->cam[index][3] = data[2 * width] >> 8;
- s->cam[index][4] = data[3 * width] & 0xff;
- s->cam[index][5] = data[3 * width] >> 8;
+ s->cam[index][0] = dp8393x_get(s, width, data, 1) & 0xff;
+ s->cam[index][1] = dp8393x_get(s, width, data, 1) >> 8;
+ s->cam[index][2] = dp8393x_get(s, width, data, 2) & 0xff;
+ s->cam[index][3] = dp8393x_get(s, width, data, 2) >> 8;
+ s->cam[index][4] = dp8393x_get(s, width, data, 3) & 0xff;
+ s->cam[index][5] = dp8393x_get(s, width, data, 3) >> 8;
DPRINTF("load cam[%d] with %02x%02x%02x%02x%02x%02x\n", index,
s->cam[index][0], s->cam[index][1], s->cam[index][2],
s->cam[index][3], s->cam[index][4], s->cam[index][5]);
@@ -272,7 +296,7 @@ static void dp8393x_do_load_cam(dp8393xState *s)
/* Read CAM enable */
address_space_rw(&s->as, dp8393x_cdp(s),
MEMTXATTRS_UNSPECIFIED, (uint8_t *)data, size, 0);
- s->regs[SONIC_CE] = data[0 * width];
+ s->regs[SONIC_CE] = dp8393x_get(s, width, data, 0);
DPRINTF("load cam done. cam enable mask 0x%04x\n", s->regs[SONIC_CE]);
/* Done */
@@ -293,10 +317,10 @@ static void dp8393x_do_read_rra(dp8393xState *s)
MEMTXATTRS_UNSPECIFIED, (uint8_t *)data, size, 0);
/* Update SONIC registers */
- s->regs[SONIC_CRBA0] = data[0 * width];
- s->regs[SONIC_CRBA1] = data[1 * width];
- s->regs[SONIC_RBWC0] = data[2 * width];
- s->regs[SONIC_RBWC1] = data[3 * width];
+ s->regs[SONIC_CRBA0] = dp8393x_get(s, width, data, 0);
+ s->regs[SONIC_CRBA1] = dp8393x_get(s, width, data, 1);
+ s->regs[SONIC_RBWC0] = dp8393x_get(s, width, data, 2);
+ s->regs[SONIC_RBWC1] = dp8393x_get(s, width, data, 3);
DPRINTF("CRBA0/1: 0x%04x/0x%04x, RBWC0/1: 0x%04x/0x%04x\n",
s->regs[SONIC_CRBA0], s->regs[SONIC_CRBA1],
s->regs[SONIC_RBWC0], s->regs[SONIC_RBWC1]);
@@ -411,12 +435,12 @@ static void dp8393x_do_transmit_packets(dp8393xState *s)
tx_len = 0;
/* Update registers */
- s->regs[SONIC_TCR] = data[0 * width] & 0xf000;
- s->regs[SONIC_TPS] = data[1 * width];
- s->regs[SONIC_TFC] = data[2 * width];
- s->regs[SONIC_TSA0] = data[3 * width];
- s->regs[SONIC_TSA1] = data[4 * width];
- s->regs[SONIC_TFS] = data[5 * width];
+ s->regs[SONIC_TCR] = dp8393x_get(s, width, data, 0) & 0xf000;
+ s->regs[SONIC_TPS] = dp8393x_get(s, width, data, 1);
+ s->regs[SONIC_TFC] = dp8393x_get(s, width, data, 2);
+ s->regs[SONIC_TSA0] = dp8393x_get(s, width, data, 3);
+ s->regs[SONIC_TSA1] = dp8393x_get(s, width, data, 4);
+ s->regs[SONIC_TFS] = dp8393x_get(s, width, data, 5);
/* Handle programmable interrupt */
if (s->regs[SONIC_TCR] & SONIC_TCR_PINT) {
@@ -442,9 +466,9 @@ static void dp8393x_do_transmit_packets(dp8393xState *s)
address_space_rw(&s->as,
dp8393x_ttda(s) + sizeof(uint16_t) * (4 + 3 * i) * width,
MEMTXATTRS_UNSPECIFIED, (uint8_t *)data, size, 0);
- s->regs[SONIC_TSA0] = data[0 * width];
- s->regs[SONIC_TSA1] = data[1 * width];
- s->regs[SONIC_TFS] = data[2 * width];
+ s->regs[SONIC_TSA0] = dp8393x_get(s, width, data, 0);
+ s->regs[SONIC_TSA1] = dp8393x_get(s, width, data, 1);
+ s->regs[SONIC_TFS] = dp8393x_get(s, width, data, 2);
}
}
@@ -471,7 +495,8 @@ static void dp8393x_do_transmit_packets(dp8393xState *s)
s->regs[SONIC_TCR] |= SONIC_TCR_PTX;
/* Write status */
- data[0 * width] = s->regs[SONIC_TCR] & 0x0fff; /* status */
+ dp8393x_put(s, width, data, 0,
+ s->regs[SONIC_TCR] & 0x0fff); /* status */
size = sizeof(uint16_t) * width;
address_space_rw(&s->as,
dp8393x_ttda(s),
@@ -485,8 +510,8 @@ static void dp8393x_do_transmit_packets(dp8393xState *s)
sizeof(uint16_t) *
(4 + 3 * s->regs[SONIC_TFC]) * width,
MEMTXATTRS_UNSPECIFIED, (uint8_t *)data, size, 0);
- s->regs[SONIC_CTDA] = data[0 * width] & ~0x1;
- if (data[0 * width] & 0x1) {
+ s->regs[SONIC_CTDA] = dp8393x_get(s, width, data, 0) & ~0x1;
+ if (dp8393x_get(s, width, data, 0) & 0x1) {
/* EOL detected */
break;
}
@@ -749,7 +774,7 @@ static ssize_t dp8393x_receive(NetClientState *nc, const uint8_t * buf,
address = dp8393x_crda(s) + sizeof(uint16_t) * 5 * width;
address_space_rw(&s->as, address, MEMTXATTRS_UNSPECIFIED,
(uint8_t *)data, size, 0);
- if (data[0 * width] & 0x1) {
+ if (dp8393x_get(s, width, data, 0) & 0x1) {
/* Still EOL ; stop reception */
return -1;
} else {
@@ -793,11 +818,11 @@ static ssize_t dp8393x_receive(NetClientState *nc, const uint8_t * buf,
/* Write status to memory */
DPRINTF("Write status at %08x\n", dp8393x_crda(s));
- data[0 * width] = s->regs[SONIC_RCR]; /* status */
- data[1 * width] = rx_len; /* byte count */
- data[2 * width] = s->regs[SONIC_TRBA0]; /* pkt_ptr0 */
- data[3 * width] = s->regs[SONIC_TRBA1]; /* pkt_ptr1 */
- data[4 * width] = s->regs[SONIC_RSC]; /* seq_no */
+ dp8393x_put(s, width, data, 0, s->regs[SONIC_RCR]); /* status */
+ dp8393x_put(s, width, data, 1, rx_len); /* byte count */
+ dp8393x_put(s, width, data, 2, s->regs[SONIC_TRBA0]); /* pkt_ptr0 */
+ dp8393x_put(s, width, data, 3, s->regs[SONIC_TRBA1]); /* pkt_ptr1 */
+ dp8393x_put(s, width, data, 4, s->regs[SONIC_RSC]); /* seq_no */
size = sizeof(uint16_t) * 5 * width;
address_space_rw(&s->as, dp8393x_crda(s),
MEMTXATTRS_UNSPECIFIED, (uint8_t *)data, size, 1);
@@ -806,12 +831,12 @@ static ssize_t dp8393x_receive(NetClientState *nc, const uint8_t * buf,
size = sizeof(uint16_t) * width;
address_space_rw(&s->as, dp8393x_crda(s) + sizeof(uint16_t) * 5 * width,
MEMTXATTRS_UNSPECIFIED, (uint8_t *)data, size, 0);
- s->regs[SONIC_LLFA] = data[0 * width];
+ s->regs[SONIC_LLFA] = dp8393x_get(s, width, data, 0);
if (s->regs[SONIC_LLFA] & 0x1) {
/* EOL detected */
s->regs[SONIC_ISR] |= SONIC_ISR_RDE;
} else {
- data[0 * width] = 0; /* in_use */
+ dp8393x_put(s, width, data, 0, 0); /* in_use */
address_space_rw(&s->as, dp8393x_crda(s) + sizeof(uint16_t) * 6 * width,
MEMTXATTRS_UNSPECIFIED, (uint8_t *)data, sizeof(uint16_t), 1);
s->regs[SONIC_CRDA] = s->regs[SONIC_LLFA];
@@ -924,6 +949,7 @@ static Property dp8393x_properties[] = {
DEFINE_NIC_PROPERTIES(dp8393xState, conf),
DEFINE_PROP_PTR("dma_mr", dp8393xState, dma_mr),
DEFINE_PROP_UINT8("it_shift", dp8393xState, it_shift, 0),
+ DEFINE_PROP_BOOL("big_endian", dp8393xState, big_endian, false),
DEFINE_PROP_END_OF_LIST(),
};
--
2.21.0
^ permalink raw reply related [flat|nested] 27+ messages in thread
* [PULL 05/11] hw/m68k: add VIA support
2019-10-28 18:16 [PULL 00/11] Q800 branch patches Laurent Vivier
` (3 preceding siblings ...)
2019-10-28 18:16 ` [PULL 04/11] dp8393x: manage big endian bus Laurent Vivier
@ 2019-10-28 18:16 ` Laurent Vivier
2019-10-28 18:16 ` [PULL 06/11] hw/m68k: implement ADB bus support for via Laurent Vivier
` (7 subsequent siblings)
12 siblings, 0 replies; 27+ messages in thread
From: Laurent Vivier @ 2019-10-28 18:16 UTC (permalink / raw)
To: qemu-devel
Cc: Fam Zheng, Kevin Wolf, qemu-block, Jason Wang, Mark Cave-Ayland,
Laurent Vivier, Max Reitz, Hervé Poussineau, Paolo Bonzini
Inside the 680x0 Macintosh, VIA (Versatile Interface Adapter) is used
to interface the keyboard, Mouse, and real-time clock. It also provides
control line for the floppy disk driver, video interface, sound circuitry
and serial interface.
This implementation is based on the MOS6522 object.
Co-developed-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Reviewed-by: Hervé Poussineau <hpoussin@reactos.org>
Message-Id: <20191026164546.30020-6-laurent@vivier.eu>
---
default-configs/m68k-softmmu.mak | 1 +
include/hw/misc/mac_via.h | 108 +++++
hw/misc/mac_via.c | 767 +++++++++++++++++++++++++++++++
MAINTAINERS | 6 +
hw/m68k/Kconfig | 4 +
hw/misc/Kconfig | 4 +
hw/misc/Makefile.objs | 1 +
7 files changed, 891 insertions(+)
create mode 100644 include/hw/misc/mac_via.h
create mode 100644 hw/misc/mac_via.c
diff --git a/default-configs/m68k-softmmu.mak b/default-configs/m68k-softmmu.mak
index d67ab8b96d..6629fd2aa3 100644
--- a/default-configs/m68k-softmmu.mak
+++ b/default-configs/m68k-softmmu.mak
@@ -7,3 +7,4 @@ CONFIG_SEMIHOSTING=y
CONFIG_AN5206=y
CONFIG_MCF5208=y
CONFIG_NEXTCUBE=y
+CONFIG_Q800=y
diff --git a/include/hw/misc/mac_via.h b/include/hw/misc/mac_via.h
new file mode 100644
index 0000000000..efc8ef3ce3
--- /dev/null
+++ b/include/hw/misc/mac_via.h
@@ -0,0 +1,108 @@
+/*
+ *
+ * Copyright (c) 2011-2018 Laurent Vivier
+ *
+ * This work is licensed under the terms of the GNU GPL, version 2 or later.
+ * See the COPYING file in the top-level directory.
+ */
+
+#ifndef HW_MISC_MAC_VIA_H
+#define HW_MISC_MAC_VIA_H
+
+#include "exec/memory.h"
+#include "hw/sysbus.h"
+#include "hw/misc/mos6522.h"
+
+
+/* VIA 1 */
+#define VIA1_IRQ_ONE_SECOND_BIT 0
+#define VIA1_IRQ_VBLANK_BIT 1
+#define VIA1_IRQ_ADB_READY_BIT 2
+#define VIA1_IRQ_ADB_DATA_BIT 3
+#define VIA1_IRQ_ADB_CLOCK_BIT 4
+
+#define VIA1_IRQ_NB 8
+
+#define VIA1_IRQ_ONE_SECOND (1 << VIA1_IRQ_ONE_SECOND_BIT)
+#define VIA1_IRQ_VBLANK (1 << VIA1_IRQ_VBLANK_BIT)
+#define VIA1_IRQ_ADB_READY (1 << VIA1_IRQ_ADB_READY_BIT)
+#define VIA1_IRQ_ADB_DATA (1 << VIA1_IRQ_ADB_DATA_BIT)
+#define VIA1_IRQ_ADB_CLOCK (1 << VIA1_IRQ_ADB_CLOCK_BIT)
+
+
+#define TYPE_MOS6522_Q800_VIA1 "mos6522-q800-via1"
+#define MOS6522_Q800_VIA1(obj) OBJECT_CHECK(MOS6522Q800VIA1State, (obj), \
+ TYPE_MOS6522_Q800_VIA1)
+
+typedef struct MOS6522Q800VIA1State {
+ /*< private >*/
+ MOS6522State parent_obj;
+
+ qemu_irq irqs[VIA1_IRQ_NB];
+ uint8_t last_b;
+ uint8_t PRAM[256];
+
+ /* external timers */
+ QEMUTimer *one_second_timer;
+ int64_t next_second;
+ QEMUTimer *VBL_timer;
+ int64_t next_VBL;
+} MOS6522Q800VIA1State;
+
+
+/* VIA 2 */
+#define VIA2_IRQ_SCSI_DATA_BIT 0
+#define VIA2_IRQ_SLOT_BIT 1
+#define VIA2_IRQ_UNUSED_BIT 2
+#define VIA2_IRQ_SCSI_BIT 3
+#define VIA2_IRQ_ASC_BIT 4
+
+#define VIA2_IRQ_NB 8
+
+#define VIA2_IRQ_SCSI_DATA (1 << VIA2_IRQ_SCSI_DATA_BIT)
+#define VIA2_IRQ_SLOT (1 << VIA2_IRQ_SLOT_BIT)
+#define VIA2_IRQ_UNUSED (1 << VIA2_IRQ_SCSI_BIT)
+#define VIA2_IRQ_SCSI (1 << VIA2_IRQ_UNUSED_BIT)
+#define VIA2_IRQ_ASC (1 << VIA2_IRQ_ASC_BIT)
+
+#define TYPE_MOS6522_Q800_VIA2 "mos6522-q800-via2"
+#define MOS6522_Q800_VIA2(obj) OBJECT_CHECK(MOS6522Q800VIA2State, (obj), \
+ TYPE_MOS6522_Q800_VIA2)
+
+typedef struct MOS6522Q800VIA2State {
+ /*< private >*/
+ MOS6522State parent_obj;
+} MOS6522Q800VIA2State;
+
+
+#define TYPE_MAC_VIA "mac_via"
+#define MAC_VIA(obj) OBJECT_CHECK(MacVIAState, (obj), TYPE_MAC_VIA)
+
+typedef struct MacVIAState {
+ SysBusDevice busdev;
+
+ /* MMIO */
+ MemoryRegion mmio;
+ MemoryRegion via1mem;
+ MemoryRegion via2mem;
+
+ /* VIAs */
+ MOS6522Q800VIA1State mos6522_via1;
+ MOS6522Q800VIA2State mos6522_via2;
+
+ /* RTC */
+ uint32_t tick_offset;
+
+ uint8_t data_out;
+ int data_out_cnt;
+ uint8_t data_in;
+ uint8_t data_in_cnt;
+ uint8_t cmd;
+ int wprotect;
+ int alt;
+
+ /* ADB */
+ ADBBusState adb_bus;
+} MacVIAState;
+
+#endif
diff --git a/hw/misc/mac_via.c b/hw/misc/mac_via.c
new file mode 100644
index 0000000000..d2da8b8e60
--- /dev/null
+++ b/hw/misc/mac_via.c
@@ -0,0 +1,767 @@
+/*
+ * QEMU m68k Macintosh VIA device support
+ *
+ * Copyright (c) 2011-2018 Laurent Vivier
+ * Copyright (c) 2018 Mark Cave-Ayland
+ *
+ * Some parts from hw/misc/macio/cuda.c
+ *
+ * Copyright (c) 2004-2007 Fabrice Bellard
+ * Copyright (c) 2007 Jocelyn Mayer
+ *
+ * some parts from linux-2.6.29, arch/m68k/include/asm/mac_via.h
+ *
+ * This work is licensed under the terms of the GNU GPL, version 2 or later.
+ * See the COPYING file in the top-level directory.
+ */
+
+#include "qemu/osdep.h"
+#include "qemu-common.h"
+#include "migration/vmstate.h"
+#include "hw/sysbus.h"
+#include "hw/irq.h"
+#include "qemu/timer.h"
+#include "hw/misc/mac_via.h"
+#include "hw/misc/mos6522.h"
+#include "hw/input/adb.h"
+#include "sysemu/runstate.h"
+#include "qapi/error.h"
+#include "qemu/cutils.h"
+
+
+/*
+ * VIAs: There are two in every machine,
+ */
+
+#define VIA_SIZE (0x2000)
+
+/*
+ * Not all of these are true post MacII I think.
+ * CSA: probably the ones CHRP marks as 'unused' change purposes
+ * when the IWM becomes the SWIM.
+ * http://www.rs6000.ibm.com/resource/technology/chrpio/via5.mak.html
+ * ftp://ftp.austin.ibm.com/pub/technology/spec/chrp/inwork/CHRP_IORef_1.0.pdf
+ *
+ * also, http://developer.apple.com/technotes/hw/hw_09.html claims the
+ * following changes for IIfx:
+ * VIA1A_vSccWrReq not available and that VIA1A_vSync has moved to an IOP.
+ * Also, "All of the functionality of VIA2 has been moved to other chips".
+ */
+
+#define VIA1A_vSccWrReq 0x80 /*
+ * SCC write. (input)
+ * [CHRP] SCC WREQ: Reflects the state of the
+ * Wait/Request pins from the SCC.
+ * [Macintosh Family Hardware]
+ * as CHRP on SE/30,II,IIx,IIcx,IIci.
+ * on IIfx, "0 means an active request"
+ */
+#define VIA1A_vRev8 0x40 /*
+ * Revision 8 board ???
+ * [CHRP] En WaitReqB: Lets the WaitReq_L
+ * signal from port B of the SCC appear on
+ * the PA7 input pin. Output.
+ * [Macintosh Family] On the SE/30, this
+ * is the bit to flip screen buffers.
+ * 0=alternate, 1=main.
+ * on II,IIx,IIcx,IIci,IIfx this is a bit
+ * for Rev ID. 0=II,IIx, 1=IIcx,IIci,IIfx
+ */
+#define VIA1A_vHeadSel 0x20 /*
+ * Head select for IWM.
+ * [CHRP] unused.
+ * [Macintosh Family] "Floppy disk
+ * state-control line SEL" on all but IIfx
+ */
+#define VIA1A_vOverlay 0x10 /*
+ * [Macintosh Family] On SE/30,II,IIx,IIcx
+ * this bit enables the "Overlay" address
+ * map in the address decoders as it is on
+ * reset for mapping the ROM over the reset
+ * vector. 1=use overlay map.
+ * On the IIci,IIfx it is another bit of the
+ * CPU ID: 0=normal IIci, 1=IIci with parity
+ * feature or IIfx.
+ * [CHRP] En WaitReqA: Lets the WaitReq_L
+ * signal from port A of the SCC appear
+ * on the PA7 input pin (CHRP). Output.
+ * [MkLinux] "Drive Select"
+ * (with 0x20 being 'disk head select')
+ */
+#define VIA1A_vSync 0x08 /*
+ * [CHRP] Sync Modem: modem clock select:
+ * 1: select the external serial clock to
+ * drive the SCC's /RTxCA pin.
+ * 0: Select the 3.6864MHz clock to drive
+ * the SCC cell.
+ * [Macintosh Family] Correct on all but IIfx
+ */
+
+/*
+ * Macintosh Family Hardware sez: bits 0-2 of VIA1A are volume control
+ * on Macs which had the PWM sound hardware. Reserved on newer models.
+ * On IIci,IIfx, bits 1-2 are the rest of the CPU ID:
+ * bit 2: 1=IIci, 0=IIfx
+ * bit 1: 1 on both IIci and IIfx.
+ * MkLinux sez bit 0 is 'burnin flag' in this case.
+ * CHRP sez: VIA1A bits 0-2 and 5 are 'unused': if programmed as
+ * inputs, these bits will read 0.
+ */
+#define VIA1A_vVolume 0x07 /* Audio volume mask for PWM */
+#define VIA1A_CPUID0 0x02 /* CPU id bit 0 on RBV, others */
+#define VIA1A_CPUID1 0x04 /* CPU id bit 0 on RBV, others */
+#define VIA1A_CPUID2 0x10 /* CPU id bit 0 on RBV, others */
+#define VIA1A_CPUID3 0x40 /* CPU id bit 0 on RBV, others */
+
+/*
+ * Info on VIA1B is from Macintosh Family Hardware & MkLinux.
+ * CHRP offers no info.
+ */
+#define VIA1B_vSound 0x80 /*
+ * Sound enable (for compatibility with
+ * PWM hardware) 0=enabled.
+ * Also, on IIci w/parity, shows parity error
+ * 0=error, 1=OK.
+ */
+#define VIA1B_vMystery 0x40 /*
+ * On IIci, parity enable. 0=enabled,1=disabled
+ * On SE/30, vertical sync interrupt enable.
+ * 0=enabled. This vSync interrupt shows up
+ * as a slot $E interrupt.
+ */
+#define VIA1B_vADBS2 0x20 /* ADB state input bit 1 (unused on IIfx) */
+#define VIA1B_vADBS1 0x10 /* ADB state input bit 0 (unused on IIfx) */
+#define VIA1B_vADBInt 0x08 /* ADB interrupt 0=interrupt (unused on IIfx)*/
+#define VIA1B_vRTCEnb 0x04 /* Enable Real time clock. 0=enabled. */
+#define VIA1B_vRTCClk 0x02 /* Real time clock serial-clock line. */
+#define VIA1B_vRTCData 0x01 /* Real time clock serial-data line. */
+
+/*
+ * VIA2 A register is the interrupt lines raised off the nubus
+ * slots.
+ * The below info is from 'Macintosh Family Hardware.'
+ * MkLinux calls the 'IIci internal video IRQ' below the 'RBV slot 0 irq.'
+ * It also notes that the slot $9 IRQ is the 'Ethernet IRQ' and
+ * defines the 'Video IRQ' as 0x40 for the 'EVR' VIA work-alike.
+ * Perhaps OSS uses vRAM1 and vRAM2 for ADB.
+ */
+
+#define VIA2A_vRAM1 0x80 /* RAM size bit 1 (IIci: reserved) */
+#define VIA2A_vRAM0 0x40 /* RAM size bit 0 (IIci: internal video IRQ) */
+#define VIA2A_vIRQE 0x20 /* IRQ from slot $E */
+#define VIA2A_vIRQD 0x10 /* IRQ from slot $D */
+#define VIA2A_vIRQC 0x08 /* IRQ from slot $C */
+#define VIA2A_vIRQB 0x04 /* IRQ from slot $B */
+#define VIA2A_vIRQA 0x02 /* IRQ from slot $A */
+#define VIA2A_vIRQ9 0x01 /* IRQ from slot $9 */
+
+/*
+ * RAM size bits decoded as follows:
+ * bit1 bit0 size of ICs in bank A
+ * 0 0 256 kbit
+ * 0 1 1 Mbit
+ * 1 0 4 Mbit
+ * 1 1 16 Mbit
+ */
+
+/*
+ * Register B has the fun stuff in it
+ */
+
+#define VIA2B_vVBL 0x80 /*
+ * VBL output to VIA1 (60.15Hz) driven by
+ * timer T1.
+ * on IIci, parity test: 0=test mode.
+ * [MkLinux] RBV_PARODD: 1=odd,0=even.
+ */
+#define VIA2B_vSndJck 0x40 /*
+ * External sound jack status.
+ * 0=plug is inserted. On SE/30, always 0
+ */
+#define VIA2B_vTfr0 0x20 /* Transfer mode bit 0 ack from NuBus */
+#define VIA2B_vTfr1 0x10 /* Transfer mode bit 1 ack from NuBus */
+#define VIA2B_vMode32 0x08 /*
+ * 24/32bit switch - doubles as cache flush
+ * on II, AMU/PMMU control.
+ * if AMU, 0=24bit to 32bit translation
+ * if PMMU, 1=PMMU is accessing page table.
+ * on SE/30 tied low.
+ * on IIx,IIcx,IIfx, unused.
+ * on IIci/RBV, cache control. 0=flush cache.
+ */
+#define VIA2B_vPower 0x04 /*
+ * Power off, 0=shut off power.
+ * on SE/30 this signal sent to PDS card.
+ */
+#define VIA2B_vBusLk 0x02 /*
+ * Lock NuBus transactions, 0=locked.
+ * on SE/30 sent to PDS card.
+ */
+#define VIA2B_vCDis 0x01 /*
+ * Cache control. On IIci, 1=disable cache card
+ * on others, 0=disable processor's instruction
+ * and data caches.
+ */
+
+/* interrupt flags */
+
+#define IRQ_SET 0x80
+
+/* common */
+
+#define VIA_IRQ_TIMER1 0x40
+#define VIA_IRQ_TIMER2 0x20
+
+/*
+ * Apple sez: http://developer.apple.com/technotes/ov/ov_04.html
+ * Another example of a valid function that has no ROM support is the use
+ * of the alternate video page for page-flipping animation. Since there
+ * is no ROM call to flip pages, it is necessary to go play with the
+ * right bit in the VIA chip (6522 Versatile Interface Adapter).
+ * [CSA: don't know which one this is, but it's one of 'em!]
+ */
+
+/*
+ * 6522 registers - see databook.
+ * CSA: Assignments for VIA1 confirmed from CHRP spec.
+ */
+
+/* partial address decode. 0xYYXX : XX part for RBV, YY part for VIA */
+/* Note: 15 VIA regs, 8 RBV regs */
+
+#define vBufB 0x0000 /* [VIA/RBV] Register B */
+#define vBufAH 0x0200 /* [VIA only] Buffer A, with handshake. DON'T USE! */
+#define vDirB 0x0400 /* [VIA only] Data Direction Register B. */
+#define vDirA 0x0600 /* [VIA only] Data Direction Register A. */
+#define vT1CL 0x0800 /* [VIA only] Timer one counter low. */
+#define vT1CH 0x0a00 /* [VIA only] Timer one counter high. */
+#define vT1LL 0x0c00 /* [VIA only] Timer one latches low. */
+#define vT1LH 0x0e00 /* [VIA only] Timer one latches high. */
+#define vT2CL 0x1000 /* [VIA only] Timer two counter low. */
+#define vT2CH 0x1200 /* [VIA only] Timer two counter high. */
+#define vSR 0x1400 /* [VIA only] Shift register. */
+#define vACR 0x1600 /* [VIA only] Auxilary control register. */
+#define vPCR 0x1800 /* [VIA only] Peripheral control register. */
+ /*
+ * CHRP sez never ever to *write* this.
+ * Mac family says never to *change* this.
+ * In fact we need to initialize it once at start.
+ */
+#define vIFR 0x1a00 /* [VIA/RBV] Interrupt flag register. */
+#define vIER 0x1c00 /* [VIA/RBV] Interrupt enable register. */
+#define vBufA 0x1e00 /* [VIA/RBV] register A (no handshake) */
+
+/* from linux 2.6 drivers/macintosh/via-macii.c */
+
+/* Bits in ACR */
+
+#define VIA1ACR_vShiftCtrl 0x1c /* Shift register control bits */
+#define VIA1ACR_vShiftExtClk 0x0c /* Shift on external clock */
+#define VIA1ACR_vShiftOut 0x10 /* Shift out if 1 */
+
+/*
+ * Apple Macintosh Family Hardware Refenece
+ * Table 19-10 ADB transaction states
+ */
+
+#define VIA1B_vADB_StateMask (VIA1B_vADBS1 | VIA1B_vADBS2)
+#define VIA1B_vADB_StateShift 4
+
+#define VIA_TIMER_FREQ (783360)
+
+/* VIA returns time offset from Jan 1, 1904, not 1970 */
+#define RTC_OFFSET 2082844800
+
+static void via1_VBL_update(MOS6522Q800VIA1State *v1s)
+{
+ MOS6522State *s = MOS6522(v1s);
+
+ /* 60 Hz irq */
+ v1s->next_VBL = (qemu_clock_get_ns(QEMU_CLOCK_VIRTUAL) + 16630) /
+ 16630 * 16630;
+
+ if (s->ier & VIA1_IRQ_VBLANK) {
+ timer_mod(v1s->VBL_timer, v1s->next_VBL);
+ } else {
+ timer_del(v1s->VBL_timer);
+ }
+}
+
+static void via1_one_second_update(MOS6522Q800VIA1State *v1s)
+{
+ MOS6522State *s = MOS6522(v1s);
+
+ v1s->next_second = (qemu_clock_get_ms(QEMU_CLOCK_VIRTUAL) + 1000) /
+ 1000 * 1000;
+ if (s->ier & VIA1_IRQ_ONE_SECOND) {
+ timer_mod(v1s->one_second_timer, v1s->next_second);
+ } else {
+ timer_del(v1s->one_second_timer);
+ }
+}
+
+static void via1_VBL(void *opaque)
+{
+ MOS6522Q800VIA1State *v1s = opaque;
+ MOS6522State *s = MOS6522(v1s);
+ MOS6522DeviceClass *mdc = MOS6522_DEVICE_GET_CLASS(s);
+
+ s->ifr |= VIA1_IRQ_VBLANK;
+ mdc->update_irq(s);
+
+ via1_VBL_update(v1s);
+}
+
+static void via1_one_second(void *opaque)
+{
+ MOS6522Q800VIA1State *v1s = opaque;
+ MOS6522State *s = MOS6522(v1s);
+ MOS6522DeviceClass *mdc = MOS6522_DEVICE_GET_CLASS(s);
+
+ s->ifr |= VIA1_IRQ_ONE_SECOND;
+ mdc->update_irq(s);
+
+ via1_one_second_update(v1s);
+}
+
+static void via1_irq_request(void *opaque, int irq, int level)
+{
+ MOS6522Q800VIA1State *v1s = opaque;
+ MOS6522State *s = MOS6522(v1s);
+ MOS6522DeviceClass *mdc = MOS6522_DEVICE_GET_CLASS(s);
+
+ if (level) {
+ s->ifr |= 1 << irq;
+ } else {
+ s->ifr &= ~(1 << irq);
+ }
+
+ mdc->update_irq(s);
+}
+
+static void via2_irq_request(void *opaque, int irq, int level)
+{
+ MOS6522Q800VIA2State *v2s = opaque;
+ MOS6522State *s = MOS6522(v2s);
+ MOS6522DeviceClass *mdc = MOS6522_DEVICE_GET_CLASS(s);
+
+ if (level) {
+ s->ifr |= 1 << irq;
+ } else {
+ s->ifr &= ~(1 << irq);
+ }
+
+ mdc->update_irq(s);
+}
+
+static void via1_rtc_update(MacVIAState *m)
+{
+ MOS6522Q800VIA1State *v1s = &m->mos6522_via1;
+ MOS6522State *s = MOS6522(v1s);
+
+ if (s->b & VIA1B_vRTCEnb) {
+ return;
+ }
+
+ if (s->dirb & VIA1B_vRTCData) {
+ /* send bits to the RTC */
+ if (!(v1s->last_b & VIA1B_vRTCClk) && (s->b & VIA1B_vRTCClk)) {
+ m->data_out <<= 1;
+ m->data_out |= s->b & VIA1B_vRTCData;
+ m->data_out_cnt++;
+ }
+ } else {
+ /* receive bits from the RTC */
+ if ((v1s->last_b & VIA1B_vRTCClk) &&
+ !(s->b & VIA1B_vRTCClk) &&
+ m->data_in_cnt) {
+ s->b = (s->b & ~VIA1B_vRTCData) |
+ ((m->data_in >> 7) & VIA1B_vRTCData);
+ m->data_in <<= 1;
+ m->data_in_cnt--;
+ }
+ }
+
+ if (m->data_out_cnt == 8) {
+ m->data_out_cnt = 0;
+
+ if (m->cmd == 0) {
+ if (m->data_out & 0x80) {
+ /* this is a read command */
+ uint32_t time = m->tick_offset +
+ (qemu_clock_get_ns(QEMU_CLOCK_VIRTUAL) /
+ NANOSECONDS_PER_SECOND);
+ if (m->data_out == 0x81) { /* seconds register 0 */
+ m->data_in = time & 0xff;
+ m->data_in_cnt = 8;
+ } else if (m->data_out == 0x85) { /* seconds register 1 */
+ m->data_in = (time >> 8) & 0xff;
+ m->data_in_cnt = 8;
+ } else if (m->data_out == 0x89) { /* seconds register 2 */
+ m->data_in = (time >> 16) & 0xff;
+ m->data_in_cnt = 8;
+ } else if (m->data_out == 0x8d) { /* seconds register 3 */
+ m->data_in = (time >> 24) & 0xff;
+ m->data_in_cnt = 8;
+ } else if ((m->data_out & 0xf3) == 0xa1) {
+ /* PRAM address 0x10 -> 0x13 */
+ int addr = (m->data_out >> 2) & 0x03;
+ m->data_in = v1s->PRAM[addr];
+ m->data_in_cnt = 8;
+ } else if ((m->data_out & 0xf3) == 0xa1) {
+ /* PRAM address 0x00 -> 0x0f */
+ int addr = (m->data_out >> 2) & 0x0f;
+ m->data_in = v1s->PRAM[addr];
+ m->data_in_cnt = 8;
+ } else if ((m->data_out & 0xf8) == 0xb8) {
+ /* extended memory designator and sector number */
+ m->cmd = m->data_out;
+ }
+ } else {
+ /* this is a write command */
+ m->cmd = m->data_out;
+ }
+ } else {
+ if (m->cmd & 0x80) {
+ if ((m->cmd & 0xf8) == 0xb8) {
+ /* extended memory designator and sector number */
+ int sector = m->cmd & 0x07;
+ int addr = (m->data_out >> 2) & 0x1f;
+
+ m->data_in = v1s->PRAM[sector * 8 + addr];
+ m->data_in_cnt = 8;
+ }
+ } else if (!m->wprotect) {
+ /* this is a write command */
+ if (m->alt != 0) {
+ /* extended memory designator and sector number */
+ int sector = m->cmd & 0x07;
+ int addr = (m->alt >> 2) & 0x1f;
+
+ v1s->PRAM[sector * 8 + addr] = m->data_out;
+
+ m->alt = 0;
+ } else if (m->cmd == 0x01) { /* seconds register 0 */
+ /* FIXME */
+ } else if (m->cmd == 0x05) { /* seconds register 1 */
+ /* FIXME */
+ } else if (m->cmd == 0x09) { /* seconds register 2 */
+ /* FIXME */
+ } else if (m->cmd == 0x0d) { /* seconds register 3 */
+ /* FIXME */
+ } else if (m->cmd == 0x31) {
+ /* Test Register */
+ } else if (m->cmd == 0x35) {
+ /* Write Protect register */
+ m->wprotect = m->data_out & 1;
+ } else if ((m->cmd & 0xf3) == 0xa1) {
+ /* PRAM address 0x10 -> 0x13 */
+ int addr = (m->cmd >> 2) & 0x03;
+ v1s->PRAM[addr] = m->data_out;
+ } else if ((m->cmd & 0xf3) == 0xa1) {
+ /* PRAM address 0x00 -> 0x0f */
+ int addr = (m->cmd >> 2) & 0x0f;
+ v1s->PRAM[addr] = m->data_out;
+ } else if ((m->cmd & 0xf8) == 0xb8) {
+ /* extended memory designator and sector number */
+ m->alt = m->cmd;
+ }
+ }
+ }
+ m->data_out = 0;
+ }
+}
+
+static uint64_t mos6522_q800_via1_read(void *opaque, hwaddr addr, unsigned size)
+{
+ MOS6522Q800VIA1State *s = MOS6522_Q800_VIA1(opaque);
+ MOS6522State *ms = MOS6522(s);
+ int64_t now = qemu_clock_get_ms(QEMU_CLOCK_VIRTUAL);
+
+ /*
+ * If IRQs are disabled, timers are disabled, but we need to update
+ * VIA1_IRQ_VBLANK and VIA1_IRQ_ONE_SECOND bits in the IFR
+ */
+
+ if (now >= s->next_VBL) {
+ ms->ifr |= VIA1_IRQ_VBLANK;
+ via1_VBL_update(s);
+ }
+ if (now >= s->next_second) {
+ ms->ifr |= VIA1_IRQ_ONE_SECOND;
+ via1_one_second_update(s);
+ }
+
+ addr = (addr >> 9) & 0xf;
+ return mos6522_read(ms, addr, size);
+}
+
+static void mos6522_q800_via1_write(void *opaque, hwaddr addr, uint64_t val,
+ unsigned size)
+{
+ MOS6522Q800VIA1State *v1s = MOS6522_Q800_VIA1(opaque);
+ MOS6522State *ms = MOS6522(v1s);
+
+ addr = (addr >> 9) & 0xf;
+ mos6522_write(ms, addr, val, size);
+
+ via1_one_second_update(v1s);
+ via1_VBL_update(v1s);
+}
+
+static const MemoryRegionOps mos6522_q800_via1_ops = {
+ .read = mos6522_q800_via1_read,
+ .write = mos6522_q800_via1_write,
+ .endianness = DEVICE_BIG_ENDIAN,
+ .valid = {
+ .min_access_size = 1,
+ .max_access_size = 1,
+ },
+};
+
+static uint64_t mos6522_q800_via2_read(void *opaque, hwaddr addr, unsigned size)
+{
+ MOS6522Q800VIA2State *s = MOS6522_Q800_VIA2(opaque);
+ MOS6522State *ms = MOS6522(s);
+
+ addr = (addr >> 9) & 0xf;
+ return mos6522_read(ms, addr, size);
+}
+
+static void mos6522_q800_via2_write(void *opaque, hwaddr addr, uint64_t val,
+ unsigned size)
+{
+ MOS6522Q800VIA2State *s = MOS6522_Q800_VIA2(opaque);
+ MOS6522State *ms = MOS6522(s);
+
+ addr = (addr >> 9) & 0xf;
+ mos6522_write(ms, addr, val, size);
+}
+
+static const MemoryRegionOps mos6522_q800_via2_ops = {
+ .read = mos6522_q800_via2_read,
+ .write = mos6522_q800_via2_write,
+ .endianness = DEVICE_BIG_ENDIAN,
+ .valid = {
+ .min_access_size = 1,
+ .max_access_size = 1,
+ },
+};
+
+static void mac_via_reset(DeviceState *dev)
+{
+ MacVIAState *m = MAC_VIA(dev);
+ MOS6522Q800VIA1State *v1s = &m->mos6522_via1;
+
+ timer_del(v1s->VBL_timer);
+ v1s->next_VBL = 0;
+ timer_del(v1s->one_second_timer);
+ v1s->next_second = 0;
+}
+
+static void mac_via_realize(DeviceState *dev, Error **errp)
+{
+ MacVIAState *m = MAC_VIA(dev);
+ MOS6522State *ms;
+ struct tm tm;
+
+ /* Init VIAs 1 and 2 */
+ sysbus_init_child_obj(OBJECT(dev), "via1", &m->mos6522_via1,
+ sizeof(m->mos6522_via1), TYPE_MOS6522_Q800_VIA1);
+
+ sysbus_init_child_obj(OBJECT(dev), "via2", &m->mos6522_via2,
+ sizeof(m->mos6522_via2), TYPE_MOS6522_Q800_VIA2);
+
+ /* Pass through mos6522 output IRQs */
+ ms = MOS6522(&m->mos6522_via1);
+ object_property_add_alias(OBJECT(dev), "irq[0]", OBJECT(ms),
+ SYSBUS_DEVICE_GPIO_IRQ "[0]", &error_abort);
+ ms = MOS6522(&m->mos6522_via2);
+ object_property_add_alias(OBJECT(dev), "irq[1]", OBJECT(ms),
+ SYSBUS_DEVICE_GPIO_IRQ "[0]", &error_abort);
+
+ /* Pass through mos6522 input IRQs */
+ qdev_pass_gpios(DEVICE(&m->mos6522_via1), dev, "via1-irq");
+ qdev_pass_gpios(DEVICE(&m->mos6522_via2), dev, "via2-irq");
+
+ /* VIA 1 */
+ m->mos6522_via1.one_second_timer = timer_new_ms(QEMU_CLOCK_VIRTUAL,
+ via1_one_second,
+ &m->mos6522_via1);
+ m->mos6522_via1.VBL_timer = timer_new_ns(QEMU_CLOCK_VIRTUAL, via1_VBL,
+ &m->mos6522_via1);
+
+ qemu_get_timedate(&tm, 0);
+ m->tick_offset = (uint32_t)mktimegm(&tm) + RTC_OFFSET;
+}
+
+static void mac_via_init(Object *obj)
+{
+ SysBusDevice *sbd = SYS_BUS_DEVICE(obj);
+ MacVIAState *m = MAC_VIA(obj);
+
+ /* MMIO */
+ memory_region_init(&m->mmio, obj, "mac-via", 2 * VIA_SIZE);
+ sysbus_init_mmio(sbd, &m->mmio);
+
+ memory_region_init_io(&m->via1mem, obj, &mos6522_q800_via1_ops,
+ &m->mos6522_via1, "via1", VIA_SIZE);
+ memory_region_add_subregion(&m->mmio, 0x0, &m->via1mem);
+
+ memory_region_init_io(&m->via2mem, obj, &mos6522_q800_via2_ops,
+ &m->mos6522_via2, "via2", VIA_SIZE);
+ memory_region_add_subregion(&m->mmio, VIA_SIZE, &m->via2mem);
+
+ /* ADB */
+ qbus_create_inplace((BusState *)&m->adb_bus, sizeof(m->adb_bus),
+ TYPE_ADB_BUS, DEVICE(obj), "adb.0");
+}
+
+static const VMStateDescription vmstate_mac_via = {
+ .name = "mac-via",
+ .version_id = 1,
+ .minimum_version_id = 1,
+ .fields = (VMStateField[]) {
+ /* VIAs */
+ VMSTATE_STRUCT(mos6522_via1.parent_obj, MacVIAState, 0, vmstate_mos6522,
+ MOS6522State),
+ VMSTATE_UINT8(mos6522_via1.last_b, MacVIAState),
+ VMSTATE_BUFFER(mos6522_via1.PRAM, MacVIAState),
+ VMSTATE_TIMER_PTR(mos6522_via1.one_second_timer, MacVIAState),
+ VMSTATE_INT64(mos6522_via1.next_second, MacVIAState),
+ VMSTATE_TIMER_PTR(mos6522_via1.VBL_timer, MacVIAState),
+ VMSTATE_INT64(mos6522_via1.next_VBL, MacVIAState),
+ VMSTATE_STRUCT(mos6522_via2.parent_obj, MacVIAState, 0, vmstate_mos6522,
+ MOS6522State),
+ /* RTC */
+ VMSTATE_UINT32(tick_offset, MacVIAState),
+ VMSTATE_UINT8(data_out, MacVIAState),
+ VMSTATE_INT32(data_out_cnt, MacVIAState),
+ VMSTATE_UINT8(data_in, MacVIAState),
+ VMSTATE_UINT8(data_in_cnt, MacVIAState),
+ VMSTATE_UINT8(cmd, MacVIAState),
+ VMSTATE_INT32(wprotect, MacVIAState),
+ VMSTATE_INT32(alt, MacVIAState),
+ VMSTATE_END_OF_LIST()
+ }
+};
+
+static void mac_via_class_init(ObjectClass *oc, void *data)
+{
+ DeviceClass *dc = DEVICE_CLASS(oc);
+
+ dc->realize = mac_via_realize;
+ dc->reset = mac_via_reset;
+ dc->vmsd = &vmstate_mac_via;
+}
+
+static TypeInfo mac_via_info = {
+ .name = TYPE_MAC_VIA,
+ .parent = TYPE_SYS_BUS_DEVICE,
+ .instance_size = sizeof(MacVIAState),
+ .instance_init = mac_via_init,
+ .class_init = mac_via_class_init,
+};
+
+/* VIA 1 */
+static void mos6522_q800_via1_portB_write(MOS6522State *s)
+{
+ MOS6522Q800VIA1State *v1s = container_of(s, MOS6522Q800VIA1State,
+ parent_obj);
+ MacVIAState *m = container_of(v1s, MacVIAState, mos6522_via1);
+
+ via1_rtc_update(m);
+
+ v1s->last_b = s->b;
+}
+
+static void mos6522_q800_via1_reset(DeviceState *dev)
+{
+ MOS6522State *ms = MOS6522(dev);
+ MOS6522DeviceClass *mdc = MOS6522_DEVICE_GET_CLASS(ms);
+
+ mdc->parent_reset(dev);
+
+ ms->timers[0].frequency = VIA_TIMER_FREQ;
+ ms->timers[1].frequency = VIA_TIMER_FREQ;
+
+ ms->b = VIA1B_vADB_StateMask | VIA1B_vADBInt | VIA1B_vRTCEnb;
+}
+
+static void mos6522_q800_via1_init(Object *obj)
+{
+ qdev_init_gpio_in_named(DEVICE(obj), via1_irq_request, "via1-irq",
+ VIA1_IRQ_NB);
+}
+
+static void mos6522_q800_via1_class_init(ObjectClass *oc, void *data)
+{
+ DeviceClass *dc = DEVICE_CLASS(oc);
+ MOS6522DeviceClass *mdc = MOS6522_DEVICE_CLASS(oc);
+
+ dc->reset = mos6522_q800_via1_reset;
+ mdc->portB_write = mos6522_q800_via1_portB_write;
+}
+
+static const TypeInfo mos6522_q800_via1_type_info = {
+ .name = TYPE_MOS6522_Q800_VIA1,
+ .parent = TYPE_MOS6522,
+ .instance_size = sizeof(MOS6522Q800VIA1State),
+ .instance_init = mos6522_q800_via1_init,
+ .class_init = mos6522_q800_via1_class_init,
+};
+
+/* VIA 2 */
+static void mos6522_q800_via2_portB_write(MOS6522State *s)
+{
+ if (s->dirb & VIA2B_vPower && (s->b & VIA2B_vPower) == 0) {
+ /* shutdown */
+ qemu_system_shutdown_request(SHUTDOWN_CAUSE_GUEST_SHUTDOWN);
+ }
+}
+
+static void mos6522_q800_via2_reset(DeviceState *dev)
+{
+ MOS6522State *ms = MOS6522(dev);
+ MOS6522DeviceClass *mdc = MOS6522_DEVICE_GET_CLASS(ms);
+
+ mdc->parent_reset(dev);
+
+ ms->timers[0].frequency = VIA_TIMER_FREQ;
+ ms->timers[1].frequency = VIA_TIMER_FREQ;
+
+ ms->dirb = 0;
+ ms->b = 0;
+}
+
+static void mos6522_q800_via2_init(Object *obj)
+{
+ qdev_init_gpio_in_named(DEVICE(obj), via2_irq_request, "via2-irq",
+ VIA2_IRQ_NB);
+}
+
+static void mos6522_q800_via2_class_init(ObjectClass *oc, void *data)
+{
+ DeviceClass *dc = DEVICE_CLASS(oc);
+ MOS6522DeviceClass *mdc = MOS6522_DEVICE_CLASS(oc);
+
+ dc->reset = mos6522_q800_via2_reset;
+ mdc->portB_write = mos6522_q800_via2_portB_write;
+}
+
+static const TypeInfo mos6522_q800_via2_type_info = {
+ .name = TYPE_MOS6522_Q800_VIA2,
+ .parent = TYPE_MOS6522,
+ .instance_size = sizeof(MOS6522Q800VIA2State),
+ .instance_init = mos6522_q800_via2_init,
+ .class_init = mos6522_q800_via2_class_init,
+};
+
+static void mac_via_register_types(void)
+{
+ type_register_static(&mos6522_q800_via1_type_info);
+ type_register_static(&mos6522_q800_via2_type_info);
+ type_register_static(&mac_via_info);
+}
+
+type_init(mac_via_register_types);
diff --git a/MAINTAINERS b/MAINTAINERS
index ed41d7d1b6..3ce8d10b58 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -917,6 +917,12 @@ F: hw/m68k/next-*.c
F: hw/display/next-fb.c
F: include/hw/m68k/next-cube.h
+q800
+M: Laurent Vivier <laurent@vivier.eu>
+S: Maintained
+F: hw/misc/mac_via.c
+F: include/hw/misc/mac_via.h
+
MicroBlaze Machines
-------------------
petalogix_s3adsp1800
diff --git a/hw/m68k/Kconfig b/hw/m68k/Kconfig
index a74fac5abd..22a357609c 100644
--- a/hw/m68k/Kconfig
+++ b/hw/m68k/Kconfig
@@ -12,3 +12,7 @@ config NEXTCUBE
bool
select FRAMEBUFFER
select ESCC
+
+config Q800
+ bool
+ select MAC_VIA
diff --git a/hw/misc/Kconfig b/hw/misc/Kconfig
index 51754bb47c..18a5dc9c09 100644
--- a/hw/misc/Kconfig
+++ b/hw/misc/Kconfig
@@ -120,4 +120,8 @@ config AUX
config UNIMP
bool
+config MAC_VIA
+ bool
+ select MOS6522
+
source macio/Kconfig
diff --git a/hw/misc/Makefile.objs b/hw/misc/Makefile.objs
index c89f3816a5..ba898a5781 100644
--- a/hw/misc/Makefile.objs
+++ b/hw/misc/Makefile.objs
@@ -79,5 +79,6 @@ common-obj-$(CONFIG_ASPEED_SOC) += aspeed_xdma.o
common-obj-$(CONFIG_ASPEED_SOC) += aspeed_scu.o aspeed_sdmc.o
common-obj-$(CONFIG_MSF2) += msf2-sysreg.o
common-obj-$(CONFIG_NRF51_SOC) += nrf51_rng.o
+obj-$(CONFIG_MAC_VIA) += mac_via.o
common-obj-$(CONFIG_GRLIB) += grlib_ahb_apb_pnp.o
--
2.21.0
^ permalink raw reply related [flat|nested] 27+ messages in thread
* [PULL 06/11] hw/m68k: implement ADB bus support for via
2019-10-28 18:16 [PULL 00/11] Q800 branch patches Laurent Vivier
` (4 preceding siblings ...)
2019-10-28 18:16 ` [PULL 05/11] hw/m68k: add VIA support Laurent Vivier
@ 2019-10-28 18:16 ` Laurent Vivier
2019-10-28 18:16 ` [PULL 07/11] hw/m68k: add Nubus support Laurent Vivier
` (6 subsequent siblings)
12 siblings, 0 replies; 27+ messages in thread
From: Laurent Vivier @ 2019-10-28 18:16 UTC (permalink / raw)
To: qemu-devel
Cc: Fam Zheng, Kevin Wolf, qemu-block, Thomas Huth, Jason Wang,
Mark Cave-Ayland, Laurent Vivier, Max Reitz,
Hervé Poussineau, Paolo Bonzini
VIA needs to be able to poll the ADB interface and to read/write data
from/to the bus.
This patch adds functions allowing that.
Co-developed-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Reviewed-by: Hervé Poussineau <hpoussin@reactos.org>
Reviewed-by: Thomas Huth <huth@tuxfamily.org>
Message-Id: <20191026164546.30020-7-laurent@vivier.eu>
---
include/hw/misc/mac_via.h | 7 ++
hw/misc/mac_via.c | 197 ++++++++++++++++++++++++++++++++++++++
hw/misc/Kconfig | 1 +
3 files changed, 205 insertions(+)
diff --git a/include/hw/misc/mac_via.h b/include/hw/misc/mac_via.h
index efc8ef3ce3..3f86fcb7e1 100644
--- a/include/hw/misc/mac_via.h
+++ b/include/hw/misc/mac_via.h
@@ -103,6 +103,13 @@ typedef struct MacVIAState {
/* ADB */
ADBBusState adb_bus;
+ QEMUTimer *adb_poll_timer;
+ qemu_irq adb_data_ready;
+ int adb_data_in_size;
+ int adb_data_in_index;
+ int adb_data_out_index;
+ uint8_t adb_data_in[128];
+ uint8_t adb_data_out[16];
} MacVIAState;
#endif
diff --git a/hw/misc/mac_via.c b/hw/misc/mac_via.c
index d2da8b8e60..f3f130ad96 100644
--- a/hw/misc/mac_via.c
+++ b/hw/misc/mac_via.c
@@ -264,10 +264,16 @@
* Table 19-10 ADB transaction states
*/
+#define ADB_STATE_NEW 0
+#define ADB_STATE_EVEN 1
+#define ADB_STATE_ODD 2
+#define ADB_STATE_IDLE 3
+
#define VIA1B_vADB_StateMask (VIA1B_vADBS1 | VIA1B_vADBS2)
#define VIA1B_vADB_StateShift 4
#define VIA_TIMER_FREQ (783360)
+#define VIA_ADB_POLL_FREQ 50 /* XXX: not real */
/* VIA returns time offset from Jan 1, 1904, not 1970 */
#define RTC_OFFSET 2082844800
@@ -472,6 +478,181 @@ static void via1_rtc_update(MacVIAState *m)
}
}
+static int adb_via_poll(MacVIAState *s, int state, uint8_t *data)
+{
+ if (state != ADB_STATE_IDLE) {
+ return 0;
+ }
+
+ if (s->adb_data_in_size < s->adb_data_in_index) {
+ return 0;
+ }
+
+ if (s->adb_data_out_index != 0) {
+ return 0;
+ }
+
+ s->adb_data_in_index = 0;
+ s->adb_data_out_index = 0;
+ s->adb_data_in_size = adb_poll(&s->adb_bus, s->adb_data_in, 0xffff);
+
+ if (s->adb_data_in_size) {
+ *data = s->adb_data_in[s->adb_data_in_index++];
+ qemu_irq_raise(s->adb_data_ready);
+ }
+
+ return s->adb_data_in_size;
+}
+
+static int adb_via_send(MacVIAState *s, int state, uint8_t data)
+{
+ switch (state) {
+ case ADB_STATE_NEW:
+ s->adb_data_out_index = 0;
+ break;
+ case ADB_STATE_EVEN:
+ if ((s->adb_data_out_index & 1) == 0) {
+ return 0;
+ }
+ break;
+ case ADB_STATE_ODD:
+ if (s->adb_data_out_index & 1) {
+ return 0;
+ }
+ break;
+ case ADB_STATE_IDLE:
+ return 0;
+ }
+
+ assert(s->adb_data_out_index < sizeof(s->adb_data_out) - 1);
+
+ s->adb_data_out[s->adb_data_out_index++] = data;
+ qemu_irq_raise(s->adb_data_ready);
+ return 1;
+}
+
+static int adb_via_receive(MacVIAState *s, int state, uint8_t *data)
+{
+ switch (state) {
+ case ADB_STATE_NEW:
+ return 0;
+
+ case ADB_STATE_EVEN:
+ if (s->adb_data_in_size <= 0) {
+ qemu_irq_raise(s->adb_data_ready);
+ return 0;
+ }
+
+ if (s->adb_data_in_index >= s->adb_data_in_size) {
+ *data = 0;
+ qemu_irq_raise(s->adb_data_ready);
+ return 1;
+ }
+
+ if ((s->adb_data_in_index & 1) == 0) {
+ return 0;
+ }
+
+ break;
+
+ case ADB_STATE_ODD:
+ if (s->adb_data_in_size <= 0) {
+ qemu_irq_raise(s->adb_data_ready);
+ return 0;
+ }
+
+ if (s->adb_data_in_index >= s->adb_data_in_size) {
+ *data = 0;
+ qemu_irq_raise(s->adb_data_ready);
+ return 1;
+ }
+
+ if (s->adb_data_in_index & 1) {
+ return 0;
+ }
+
+ break;
+
+ case ADB_STATE_IDLE:
+ if (s->adb_data_out_index == 0) {
+ return 0;
+ }
+
+ s->adb_data_in_size = adb_request(&s->adb_bus, s->adb_data_in,
+ s->adb_data_out,
+ s->adb_data_out_index);
+ s->adb_data_out_index = 0;
+ s->adb_data_in_index = 0;
+ if (s->adb_data_in_size < 0) {
+ *data = 0xff;
+ qemu_irq_raise(s->adb_data_ready);
+ return -1;
+ }
+
+ if (s->adb_data_in_size == 0) {
+ return 0;
+ }
+
+ break;
+ }
+
+ assert(s->adb_data_in_index < sizeof(s->adb_data_in) - 1);
+
+ *data = s->adb_data_in[s->adb_data_in_index++];
+ qemu_irq_raise(s->adb_data_ready);
+ if (*data == 0xff || *data == 0) {
+ return 0;
+ }
+ return 1;
+}
+
+static void via1_adb_update(MacVIAState *m)
+{
+ MOS6522Q800VIA1State *v1s = MOS6522_Q800_VIA1(&m->mos6522_via1);
+ MOS6522State *s = MOS6522(v1s);
+ int state;
+ int ret;
+
+ state = (s->b & VIA1B_vADB_StateMask) >> VIA1B_vADB_StateShift;
+
+ if (s->acr & VIA1ACR_vShiftOut) {
+ /* output mode */
+ ret = adb_via_send(m, state, s->sr);
+ if (ret > 0) {
+ s->b &= ~VIA1B_vADBInt;
+ } else {
+ s->b |= VIA1B_vADBInt;
+ }
+ } else {
+ /* input mode */
+ ret = adb_via_receive(m, state, &s->sr);
+ if (ret > 0 && s->sr != 0xff) {
+ s->b &= ~VIA1B_vADBInt;
+ } else {
+ s->b |= VIA1B_vADBInt;
+ }
+ }
+}
+
+static void via_adb_poll(void *opaque)
+{
+ MacVIAState *m = opaque;
+ MOS6522Q800VIA1State *v1s = MOS6522_Q800_VIA1(&m->mos6522_via1);
+ MOS6522State *s = MOS6522(v1s);
+ int state;
+
+ if (s->b & VIA1B_vADBInt) {
+ state = (s->b & VIA1B_vADB_StateMask) >> VIA1B_vADB_StateShift;
+ if (adb_via_poll(m, state, &s->sr)) {
+ s->b &= ~VIA1B_vADBInt;
+ }
+ }
+
+ timer_mod(m->adb_poll_timer,
+ qemu_clock_get_ns(QEMU_CLOCK_VIRTUAL) +
+ (NANOSECONDS_PER_SECOND / VIA_ADB_POLL_FREQ));
+}
+
static uint64_t mos6522_q800_via1_read(void *opaque, hwaddr addr, unsigned size)
{
MOS6522Q800VIA1State *s = MOS6522_Q800_VIA1(opaque);
@@ -553,6 +734,10 @@ static void mac_via_reset(DeviceState *dev)
MacVIAState *m = MAC_VIA(dev);
MOS6522Q800VIA1State *v1s = &m->mos6522_via1;
+ timer_mod(m->adb_poll_timer,
+ qemu_clock_get_ns(QEMU_CLOCK_VIRTUAL) +
+ (NANOSECONDS_PER_SECOND / VIA_ADB_POLL_FREQ));
+
timer_del(v1s->VBL_timer);
v1s->next_VBL = 0;
timer_del(v1s->one_second_timer);
@@ -593,6 +778,10 @@ static void mac_via_realize(DeviceState *dev, Error **errp)
qemu_get_timedate(&tm, 0);
m->tick_offset = (uint32_t)mktimegm(&tm) + RTC_OFFSET;
+
+ m->adb_poll_timer = timer_new_ns(QEMU_CLOCK_VIRTUAL, via_adb_poll, m);
+ m->adb_data_ready = qdev_get_gpio_in_named(dev, "via1-irq",
+ VIA1_IRQ_ADB_READY_BIT);
}
static void mac_via_init(Object *obj)
@@ -642,6 +831,13 @@ static const VMStateDescription vmstate_mac_via = {
VMSTATE_UINT8(cmd, MacVIAState),
VMSTATE_INT32(wprotect, MacVIAState),
VMSTATE_INT32(alt, MacVIAState),
+ /* ADB */
+ VMSTATE_TIMER_PTR(adb_poll_timer, MacVIAState),
+ VMSTATE_INT32(adb_data_in_size, MacVIAState),
+ VMSTATE_INT32(adb_data_in_index, MacVIAState),
+ VMSTATE_INT32(adb_data_out_index, MacVIAState),
+ VMSTATE_BUFFER(adb_data_in, MacVIAState),
+ VMSTATE_BUFFER(adb_data_out, MacVIAState),
VMSTATE_END_OF_LIST()
}
};
@@ -671,6 +867,7 @@ static void mos6522_q800_via1_portB_write(MOS6522State *s)
MacVIAState *m = container_of(v1s, MacVIAState, mos6522_via1);
via1_rtc_update(m);
+ via1_adb_update(m);
v1s->last_b = s->b;
}
diff --git a/hw/misc/Kconfig b/hw/misc/Kconfig
index 18a5dc9c09..2164646553 100644
--- a/hw/misc/Kconfig
+++ b/hw/misc/Kconfig
@@ -123,5 +123,6 @@ config UNIMP
config MAC_VIA
bool
select MOS6522
+ select ADB
source macio/Kconfig
--
2.21.0
^ permalink raw reply related [flat|nested] 27+ messages in thread
* [PULL 07/11] hw/m68k: add Nubus support
2019-10-28 18:16 [PULL 00/11] Q800 branch patches Laurent Vivier
` (5 preceding siblings ...)
2019-10-28 18:16 ` [PULL 06/11] hw/m68k: implement ADB bus support for via Laurent Vivier
@ 2019-10-28 18:16 ` Laurent Vivier
2019-10-28 18:16 ` [PULL 08/11] hw/m68k: add Nubus macfb video card Laurent Vivier
` (5 subsequent siblings)
12 siblings, 0 replies; 27+ messages in thread
From: Laurent Vivier @ 2019-10-28 18:16 UTC (permalink / raw)
To: qemu-devel
Cc: Fam Zheng, Kevin Wolf, qemu-block, Thomas Huth, Jason Wang,
Mark Cave-Ayland, Laurent Vivier, Max Reitz, Paolo Bonzini
This patch adds basic support for the NuBus bus. This is used by 680x0
Macintosh.
Co-developed-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Reviewed-by: Thomas Huth <huth@tuxfamily.org>
Message-Id: <20191026164546.30020-8-laurent@vivier.eu>
---
include/hw/nubus/mac-nubus-bridge.h | 24 ++++
include/hw/nubus/nubus.h | 69 +++++++++
hw/nubus/mac-nubus-bridge.c | 45 ++++++
hw/nubus/nubus-bridge.c | 34 +++++
hw/nubus/nubus-bus.c | 111 ++++++++++++++
hw/nubus/nubus-device.c | 215 ++++++++++++++++++++++++++++
MAINTAINERS | 2 +
hw/Kconfig | 1 +
hw/Makefile.objs | 1 +
hw/m68k/Kconfig | 1 +
hw/nubus/Kconfig | 2 +
hw/nubus/Makefile.objs | 4 +
12 files changed, 509 insertions(+)
create mode 100644 include/hw/nubus/mac-nubus-bridge.h
create mode 100644 include/hw/nubus/nubus.h
create mode 100644 hw/nubus/mac-nubus-bridge.c
create mode 100644 hw/nubus/nubus-bridge.c
create mode 100644 hw/nubus/nubus-bus.c
create mode 100644 hw/nubus/nubus-device.c
create mode 100644 hw/nubus/Kconfig
create mode 100644 hw/nubus/Makefile.objs
diff --git a/include/hw/nubus/mac-nubus-bridge.h b/include/hw/nubus/mac-nubus-bridge.h
new file mode 100644
index 0000000000..ce9c789d99
--- /dev/null
+++ b/include/hw/nubus/mac-nubus-bridge.h
@@ -0,0 +1,24 @@
+/*
+ * Copyright (c) 2013-2018 Laurent Vivier <laurent@vivier.eu>
+ *
+ * This work is licensed under the terms of the GNU GPL, version 2 or later.
+ * See the COPYING file in the top-level directory.
+ *
+ */
+
+#ifndef HW_NUBUS_MAC_H
+#define HW_NUBUS_MAC_H
+
+#include "hw/nubus/nubus.h"
+
+#define TYPE_MAC_NUBUS_BRIDGE "mac-nubus-bridge"
+#define MAC_NUBUS_BRIDGE(obj) OBJECT_CHECK(MacNubusState, (obj), \
+ TYPE_MAC_NUBUS_BRIDGE)
+
+typedef struct MacNubusState {
+ SysBusDevice sysbus_dev;
+
+ NubusBus *bus;
+} MacNubusState;
+
+#endif
diff --git a/include/hw/nubus/nubus.h b/include/hw/nubus/nubus.h
new file mode 100644
index 0000000000..a8634e54c5
--- /dev/null
+++ b/include/hw/nubus/nubus.h
@@ -0,0 +1,69 @@
+/*
+ * Copyright (c) 2013-2018 Laurent Vivier <laurent@vivier.eu>
+ *
+ * This work is licensed under the terms of the GNU GPL, version 2 or later.
+ * See the COPYING file in the top-level directory.
+ *
+ */
+
+#ifndef HW_NUBUS_NUBUS_H
+#define HW_NUBUS_NUBUS_H
+
+#include "hw/qdev-properties.h"
+#include "exec/address-spaces.h"
+
+#define NUBUS_SUPER_SLOT_SIZE 0x10000000U
+#define NUBUS_SUPER_SLOT_NB 0x9
+
+#define NUBUS_SLOT_SIZE 0x01000000
+#define NUBUS_SLOT_NB 0xF
+
+#define NUBUS_FIRST_SLOT 0x9
+#define NUBUS_LAST_SLOT 0xF
+
+#define TYPE_NUBUS_DEVICE "nubus-device"
+#define NUBUS_DEVICE(obj) \
+ OBJECT_CHECK(NubusDevice, (obj), TYPE_NUBUS_DEVICE)
+
+#define TYPE_NUBUS_BUS "nubus-bus"
+#define NUBUS_BUS(obj) OBJECT_CHECK(NubusBus, (obj), TYPE_NUBUS_BUS)
+
+#define TYPE_NUBUS_BRIDGE "nubus-bridge"
+#define NUBUS_BRIDGE(obj) OBJECT_CHECK(NubusBridge, (obj), TYPE_NUBUS_BRIDGE)
+
+typedef struct NubusBus {
+ BusState qbus;
+
+ MemoryRegion super_slot_io;
+ MemoryRegion slot_io;
+
+ int current_slot;
+} NubusBus;
+
+typedef struct NubusDevice {
+ DeviceState qdev;
+
+ int slot_nb;
+ MemoryRegion slot_mem;
+
+ /* Format Block */
+
+ MemoryRegion fblock_io;
+
+ uint32_t rom_length;
+ uint32_t rom_crc;
+ uint8_t rom_rev;
+ uint8_t rom_format;
+ uint8_t byte_lanes;
+ int32_t directory_offset;
+
+ /* ROM */
+
+ MemoryRegion rom_io;
+ const uint8_t *rom;
+} NubusDevice;
+
+void nubus_register_rom(NubusDevice *dev, const uint8_t *rom, uint32_t size,
+ int revision, int format, uint8_t byte_lanes);
+
+#endif
diff --git a/hw/nubus/mac-nubus-bridge.c b/hw/nubus/mac-nubus-bridge.c
new file mode 100644
index 0000000000..7c329300b8
--- /dev/null
+++ b/hw/nubus/mac-nubus-bridge.c
@@ -0,0 +1,45 @@
+/*
+ * Copyright (c) 2013-2018 Laurent Vivier <laurent@vivier.eu>
+ *
+ * This work is licensed under the terms of the GNU GPL, version 2 or later.
+ * See the COPYING file in the top-level directory.
+ *
+ */
+
+#include "qemu/osdep.h"
+#include "hw/sysbus.h"
+#include "hw/nubus/mac-nubus-bridge.h"
+
+
+static void mac_nubus_bridge_init(Object *obj)
+{
+ MacNubusState *s = MAC_NUBUS_BRIDGE(obj);
+ SysBusDevice *sbd = SYS_BUS_DEVICE(obj);
+
+ s->bus = NUBUS_BUS(qbus_create(TYPE_NUBUS_BUS, DEVICE(s), NULL));
+
+ sysbus_init_mmio(sbd, &s->bus->super_slot_io);
+ sysbus_init_mmio(sbd, &s->bus->slot_io);
+}
+
+static void mac_nubus_bridge_class_init(ObjectClass *klass, void *data)
+{
+ DeviceClass *dc = DEVICE_CLASS(klass);
+
+ dc->desc = "Nubus bridge";
+}
+
+static const TypeInfo mac_nubus_bridge_info = {
+ .name = TYPE_MAC_NUBUS_BRIDGE,
+ .parent = TYPE_NUBUS_BRIDGE,
+ .instance_init = mac_nubus_bridge_init,
+ .instance_size = sizeof(MacNubusState),
+ .class_init = mac_nubus_bridge_class_init,
+};
+
+static void mac_nubus_bridge_register_types(void)
+{
+ type_register_static(&mac_nubus_bridge_info);
+}
+
+type_init(mac_nubus_bridge_register_types)
diff --git a/hw/nubus/nubus-bridge.c b/hw/nubus/nubus-bridge.c
new file mode 100644
index 0000000000..cd8c6a91eb
--- /dev/null
+++ b/hw/nubus/nubus-bridge.c
@@ -0,0 +1,34 @@
+/*
+ * QEMU Macintosh Nubus
+ *
+ * Copyright (c) 2013-2018 Laurent Vivier <laurent@vivier.eu>
+ *
+ * This work is licensed under the terms of the GNU GPL, version 2 or later.
+ * See the COPYING file in the top-level directory.
+ *
+ */
+
+#include "qemu/osdep.h"
+#include "hw/sysbus.h"
+#include "hw/nubus/nubus.h"
+
+static void nubus_bridge_class_init(ObjectClass *klass, void *data)
+{
+ DeviceClass *dc = DEVICE_CLASS(klass);
+
+ dc->fw_name = "nubus";
+}
+
+static const TypeInfo nubus_bridge_info = {
+ .name = TYPE_NUBUS_BRIDGE,
+ .parent = TYPE_SYS_BUS_DEVICE,
+ .instance_size = sizeof(SysBusDevice),
+ .class_init = nubus_bridge_class_init,
+};
+
+static void nubus_register_types(void)
+{
+ type_register_static(&nubus_bridge_info);
+}
+
+type_init(nubus_register_types)
diff --git a/hw/nubus/nubus-bus.c b/hw/nubus/nubus-bus.c
new file mode 100644
index 0000000000..942a6d5342
--- /dev/null
+++ b/hw/nubus/nubus-bus.c
@@ -0,0 +1,111 @@
+/*
+ * QEMU Macintosh Nubus
+ *
+ * Copyright (c) 2013-2018 Laurent Vivier <laurent@vivier.eu>
+ *
+ * This work is licensed under the terms of the GNU GPL, version 2 or later.
+ * See the COPYING file in the top-level directory.
+ *
+ */
+
+#include "qemu/osdep.h"
+#include "hw/nubus/nubus.h"
+#include "hw/sysbus.h"
+#include "qapi/error.h"
+
+
+static NubusBus *nubus_find(void)
+{
+ /* Returns NULL unless there is exactly one nubus device */
+ return NUBUS_BUS(object_resolve_path_type("", TYPE_NUBUS_BUS, NULL));
+}
+
+static void nubus_slot_write(void *opaque, hwaddr addr, uint64_t val,
+ unsigned int size)
+{
+ /* read only */
+}
+
+
+static uint64_t nubus_slot_read(void *opaque, hwaddr addr,
+ unsigned int size)
+{
+ return 0;
+}
+
+static const MemoryRegionOps nubus_slot_ops = {
+ .read = nubus_slot_read,
+ .write = nubus_slot_write,
+ .endianness = DEVICE_BIG_ENDIAN,
+ .valid = {
+ .min_access_size = 1,
+ .max_access_size = 1,
+ },
+};
+
+static void nubus_super_slot_write(void *opaque, hwaddr addr, uint64_t val,
+ unsigned int size)
+{
+ /* read only */
+}
+
+static uint64_t nubus_super_slot_read(void *opaque, hwaddr addr,
+ unsigned int size)
+{
+ return 0;
+}
+
+static const MemoryRegionOps nubus_super_slot_ops = {
+ .read = nubus_super_slot_read,
+ .write = nubus_super_slot_write,
+ .endianness = DEVICE_BIG_ENDIAN,
+ .valid = {
+ .min_access_size = 1,
+ .max_access_size = 1,
+ },
+};
+
+static void nubus_realize(BusState *bus, Error **errp)
+{
+ if (!nubus_find()) {
+ error_setg(errp, "at most one %s device is permitted", TYPE_NUBUS_BUS);
+ return;
+ }
+}
+
+static void nubus_init(Object *obj)
+{
+ NubusBus *nubus = NUBUS_BUS(obj);
+
+ memory_region_init_io(&nubus->super_slot_io, obj, &nubus_super_slot_ops,
+ nubus, "nubus-super-slots",
+ NUBUS_SUPER_SLOT_NB * NUBUS_SUPER_SLOT_SIZE);
+
+ memory_region_init_io(&nubus->slot_io, obj, &nubus_slot_ops,
+ nubus, "nubus-slots",
+ NUBUS_SLOT_NB * NUBUS_SLOT_SIZE);
+
+ nubus->current_slot = NUBUS_FIRST_SLOT;
+}
+
+static void nubus_class_init(ObjectClass *oc, void *data)
+{
+ BusClass *bc = BUS_CLASS(oc);
+
+ bc->realize = nubus_realize;
+}
+
+static const TypeInfo nubus_bus_info = {
+ .name = TYPE_NUBUS_BUS,
+ .parent = TYPE_BUS,
+ .instance_size = sizeof(NubusBus),
+ .instance_init = nubus_init,
+ .class_init = nubus_class_init,
+};
+
+static void nubus_register_types(void)
+{
+ type_register_static(&nubus_bus_info);
+}
+
+type_init(nubus_register_types)
diff --git a/hw/nubus/nubus-device.c b/hw/nubus/nubus-device.c
new file mode 100644
index 0000000000..01ccad9e8e
--- /dev/null
+++ b/hw/nubus/nubus-device.c
@@ -0,0 +1,215 @@
+/*
+ * QEMU Macintosh Nubus
+ *
+ * Copyright (c) 2013-2018 Laurent Vivier <laurent@vivier.eu>
+ *
+ * This work is licensed under the terms of the GNU GPL, version 2 or later.
+ * See the COPYING file in the top-level directory.
+ *
+ */
+
+#include "qemu/osdep.h"
+#include "hw/nubus/nubus.h"
+#include "qapi/error.h"
+
+
+/* The Format Block Structure */
+
+#define FBLOCK_DIRECTORY_OFFSET 0
+#define FBLOCK_LENGTH 4
+#define FBLOCK_CRC 8
+#define FBLOCK_REVISION_LEVEL 12
+#define FBLOCK_FORMAT 13
+#define FBLOCK_TEST_PATTERN 14
+#define FBLOCK_RESERVED 18
+#define FBLOCK_BYTE_LANES 19
+
+#define FBLOCK_SIZE 20
+#define FBLOCK_PATTERN_VAL 0x5a932bc7
+
+static uint64_t nubus_fblock_read(void *opaque, hwaddr addr, unsigned int size)
+{
+ NubusDevice *dev = opaque;
+ uint64_t val;
+
+#define BYTE(v, b) (((v) >> (24 - 8 * (b))) & 0xff)
+ switch (addr) {
+ case FBLOCK_BYTE_LANES:
+ val = dev->byte_lanes;
+ val |= (val ^ 0xf) << 4;
+ break;
+ case FBLOCK_RESERVED:
+ val = 0x00;
+ break;
+ case FBLOCK_TEST_PATTERN...FBLOCK_TEST_PATTERN + 3:
+ val = BYTE(FBLOCK_PATTERN_VAL, addr - FBLOCK_TEST_PATTERN);
+ break;
+ case FBLOCK_FORMAT:
+ val = dev->rom_format;
+ break;
+ case FBLOCK_REVISION_LEVEL:
+ val = dev->rom_rev;
+ break;
+ case FBLOCK_CRC...FBLOCK_CRC + 3:
+ val = BYTE(dev->rom_crc, addr - FBLOCK_CRC);
+ break;
+ case FBLOCK_LENGTH...FBLOCK_LENGTH + 3:
+ val = BYTE(dev->rom_length, addr - FBLOCK_LENGTH);
+ break;
+ case FBLOCK_DIRECTORY_OFFSET...FBLOCK_DIRECTORY_OFFSET + 3:
+ val = BYTE(dev->directory_offset, addr - FBLOCK_DIRECTORY_OFFSET);
+ break;
+ default:
+ val = 0;
+ break;
+ }
+ return val;
+}
+
+static void nubus_fblock_write(void *opaque, hwaddr addr, uint64_t val,
+ unsigned int size)
+{
+ /* read only */
+}
+
+static const MemoryRegionOps nubus_format_block_ops = {
+ .read = nubus_fblock_read,
+ .write = nubus_fblock_write,
+ .endianness = DEVICE_BIG_ENDIAN,
+ .valid = {
+ .min_access_size = 1,
+ .max_access_size = 1,
+ }
+};
+
+static void nubus_register_format_block(NubusDevice *dev)
+{
+ char *fblock_name;
+
+ fblock_name = g_strdup_printf("nubus-slot-%d-format-block",
+ dev->slot_nb);
+
+ hwaddr fblock_offset = memory_region_size(&dev->slot_mem) - FBLOCK_SIZE;
+ memory_region_init_io(&dev->fblock_io, NULL, &nubus_format_block_ops,
+ dev, fblock_name, FBLOCK_SIZE);
+ memory_region_add_subregion(&dev->slot_mem, fblock_offset,
+ &dev->fblock_io);
+
+ g_free(fblock_name);
+}
+
+static void mac_nubus_rom_write(void *opaque, hwaddr addr, uint64_t val,
+ unsigned int size)
+{
+ /* read only */
+}
+
+static uint64_t mac_nubus_rom_read(void *opaque, hwaddr addr,
+ unsigned int size)
+{
+ NubusDevice *dev = opaque;
+
+ return dev->rom[addr];
+}
+
+static const MemoryRegionOps mac_nubus_rom_ops = {
+ .read = mac_nubus_rom_read,
+ .write = mac_nubus_rom_write,
+ .endianness = DEVICE_BIG_ENDIAN,
+ .valid = {
+ .min_access_size = 1,
+ .max_access_size = 1,
+ },
+};
+
+
+void nubus_register_rom(NubusDevice *dev, const uint8_t *rom, uint32_t size,
+ int revision, int format, uint8_t byte_lanes)
+{
+ hwaddr rom_offset;
+ char *rom_name;
+
+ /* FIXME : really compute CRC */
+ dev->rom_length = 0;
+ dev->rom_crc = 0;
+
+ dev->rom_rev = revision;
+ dev->rom_format = format;
+
+ dev->byte_lanes = byte_lanes;
+ dev->directory_offset = -size;
+
+ /* ROM */
+
+ dev->rom = rom;
+ rom_name = g_strdup_printf("nubus-slot-%d-rom", dev->slot_nb);
+ memory_region_init_io(&dev->rom_io, NULL, &mac_nubus_rom_ops,
+ dev, rom_name, size);
+ memory_region_set_readonly(&dev->rom_io, true);
+
+ rom_offset = memory_region_size(&dev->slot_mem) - FBLOCK_SIZE +
+ dev->directory_offset;
+ memory_region_add_subregion(&dev->slot_mem, rom_offset, &dev->rom_io);
+
+ g_free(rom_name);
+}
+
+static void nubus_device_realize(DeviceState *dev, Error **errp)
+{
+ NubusBus *nubus = NUBUS_BUS(qdev_get_parent_bus(DEVICE(dev)));
+ NubusDevice *nd = NUBUS_DEVICE(dev);
+ char *name;
+ hwaddr slot_offset;
+
+ if (nubus->current_slot < NUBUS_FIRST_SLOT ||
+ nubus->current_slot > NUBUS_LAST_SLOT) {
+ error_setg(errp, "Cannot register nubus card, not enough slots");
+ return;
+ }
+
+ nd->slot_nb = nubus->current_slot++;
+ name = g_strdup_printf("nubus-slot-%d", nd->slot_nb);
+
+ if (nd->slot_nb < NUBUS_FIRST_SLOT) {
+ /* Super */
+ slot_offset = (nd->slot_nb - 6) * NUBUS_SUPER_SLOT_SIZE;
+
+ memory_region_init(&nd->slot_mem, OBJECT(dev), name,
+ NUBUS_SUPER_SLOT_SIZE);
+ memory_region_add_subregion(&nubus->super_slot_io, slot_offset,
+ &nd->slot_mem);
+ } else {
+ /* Normal */
+ slot_offset = nd->slot_nb * NUBUS_SLOT_SIZE;
+
+ memory_region_init(&nd->slot_mem, OBJECT(dev), name, NUBUS_SLOT_SIZE);
+ memory_region_add_subregion(&nubus->slot_io, slot_offset,
+ &nd->slot_mem);
+ }
+
+ g_free(name);
+ nubus_register_format_block(nd);
+}
+
+static void nubus_device_class_init(ObjectClass *oc, void *data)
+{
+ DeviceClass *dc = DEVICE_CLASS(oc);
+
+ dc->realize = nubus_device_realize;
+ dc->bus_type = TYPE_NUBUS_BUS;
+}
+
+static const TypeInfo nubus_device_type_info = {
+ .name = TYPE_NUBUS_DEVICE,
+ .parent = TYPE_DEVICE,
+ .abstract = true,
+ .instance_size = sizeof(NubusDevice),
+ .class_init = nubus_device_class_init,
+};
+
+static void nubus_register_types(void)
+{
+ type_register_static(&nubus_device_type_info);
+}
+
+type_init(nubus_register_types)
diff --git a/MAINTAINERS b/MAINTAINERS
index 3ce8d10b58..7892ab5f02 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -921,7 +921,9 @@ q800
M: Laurent Vivier <laurent@vivier.eu>
S: Maintained
F: hw/misc/mac_via.c
+F: hw/nubus/*
F: include/hw/misc/mac_via.h
+F: include/hw/nubus/*
MicroBlaze Machines
-------------------
diff --git a/hw/Kconfig b/hw/Kconfig
index b45db3c813..0501a55315 100644
--- a/hw/Kconfig
+++ b/hw/Kconfig
@@ -21,6 +21,7 @@ source isa/Kconfig
source mem/Kconfig
source misc/Kconfig
source net/Kconfig
+source nubus/Kconfig
source nvram/Kconfig
source pci-bridge/Kconfig
source pci-host/Kconfig
diff --git a/hw/Makefile.objs b/hw/Makefile.objs
index ece6cc3755..457b95e28d 100644
--- a/hw/Makefile.objs
+++ b/hw/Makefile.objs
@@ -37,6 +37,7 @@ devices-dirs-y += virtio/
devices-dirs-y += watchdog/
devices-dirs-y += xen/
devices-dirs-$(CONFIG_MEM_DEVICE) += mem/
+devices-dirs-$(CONFIG_NUBUS) += nubus/
devices-dirs-y += semihosting/
devices-dirs-y += smbios/
endif
diff --git a/hw/m68k/Kconfig b/hw/m68k/Kconfig
index 22a357609c..947cd42c01 100644
--- a/hw/m68k/Kconfig
+++ b/hw/m68k/Kconfig
@@ -16,3 +16,4 @@ config NEXTCUBE
config Q800
bool
select MAC_VIA
+ select NUBUS
diff --git a/hw/nubus/Kconfig b/hw/nubus/Kconfig
new file mode 100644
index 0000000000..8fb8b22189
--- /dev/null
+++ b/hw/nubus/Kconfig
@@ -0,0 +1,2 @@
+config NUBUS
+ bool
diff --git a/hw/nubus/Makefile.objs b/hw/nubus/Makefile.objs
new file mode 100644
index 0000000000..135ba7878d
--- /dev/null
+++ b/hw/nubus/Makefile.objs
@@ -0,0 +1,4 @@
+common-obj-y += nubus-device.o
+common-obj-y += nubus-bus.o
+common-obj-y += nubus-bridge.o
+common-obj-$(CONFIG_Q800) += mac-nubus-bridge.o
--
2.21.0
^ permalink raw reply related [flat|nested] 27+ messages in thread
* [PULL 08/11] hw/m68k: add Nubus macfb video card
2019-10-28 18:16 [PULL 00/11] Q800 branch patches Laurent Vivier
` (6 preceding siblings ...)
2019-10-28 18:16 ` [PULL 07/11] hw/m68k: add Nubus support Laurent Vivier
@ 2019-10-28 18:16 ` Laurent Vivier
2019-10-28 18:16 ` [PULL 09/11] hw/m68k: add a dummy SWIM floppy controller Laurent Vivier
` (4 subsequent siblings)
12 siblings, 0 replies; 27+ messages in thread
From: Laurent Vivier @ 2019-10-28 18:16 UTC (permalink / raw)
To: qemu-devel
Cc: Fam Zheng, Kevin Wolf, qemu-block, Thomas Huth, Jason Wang,
Mark Cave-Ayland, Laurent Vivier, Max Reitz,
Hervé Poussineau, Paolo Bonzini
This patch adds support for a graphic framebuffer device.
This device can be added as a sysbus device or as a NuBus device.
It is accessed as a framebuffer but the color palette can be set.
Co-developed-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Reviewed-by: Hervé Poussineau <hpoussin@reactos.org>
Reviewed-by: Thomas Huth <huth@tuxfamily.org>
Message-Id: <20191026164546.30020-9-laurent@vivier.eu>
---
include/hw/display/macfb.h | 64 +++++
arch_init.c | 4 +
hw/display/macfb.c | 477 +++++++++++++++++++++++++++++++++++++
vl.c | 3 +-
MAINTAINERS | 2 +
hw/display/Kconfig | 5 +
hw/display/Makefile.objs | 1 +
hw/m68k/Kconfig | 1 +
qemu-options.hx | 2 +-
9 files changed, 557 insertions(+), 2 deletions(-)
create mode 100644 include/hw/display/macfb.h
create mode 100644 hw/display/macfb.c
diff --git a/include/hw/display/macfb.h b/include/hw/display/macfb.h
new file mode 100644
index 0000000000..26367ae2c4
--- /dev/null
+++ b/include/hw/display/macfb.h
@@ -0,0 +1,64 @@
+/*
+ * QEMU Motorola 680x0 Macintosh Video Card Emulation
+ * Copyright (c) 2012-2018 Laurent Vivier
+ *
+ * some parts from QEMU G364 framebuffer Emulator.
+ * Copyright (c) 2007-2011 Herve Poussineau
+ *
+ * This work is licensed under the terms of the GNU GPL, version 2 or later.
+ * See the COPYING file in the top-level directory.
+ *
+ */
+
+#ifndef MACFB_H
+#define MACFB_H
+
+#include "qemu/osdep.h"
+#include "exec/memory.h"
+#include "ui/console.h"
+
+typedef struct MacfbState {
+ MemoryRegion mem_vram;
+ MemoryRegion mem_ctrl;
+ QemuConsole *con;
+
+ uint8_t *vram;
+ uint32_t vram_bit_mask;
+ uint32_t palette_current;
+ uint8_t color_palette[256 * 3];
+ uint32_t width, height; /* in pixels */
+ uint8_t depth;
+} MacfbState;
+
+#define TYPE_MACFB "sysbus-macfb"
+#define MACFB(obj) \
+ OBJECT_CHECK(MacfbSysBusState, (obj), TYPE_MACFB)
+
+typedef struct {
+ SysBusDevice busdev;
+
+ MacfbState macfb;
+} MacfbSysBusState;
+
+#define MACFB_NUBUS_DEVICE_CLASS(class) \
+ OBJECT_CLASS_CHECK(MacfbNubusDeviceClass, (class), TYPE_NUBUS_MACFB)
+#define MACFB_NUBUS_GET_CLASS(obj) \
+ OBJECT_GET_CLASS(MacfbNubusDeviceClass, (obj), TYPE_NUBUS_MACFB)
+
+typedef struct MacfbNubusDeviceClass {
+ DeviceClass parent_class;
+
+ DeviceRealize parent_realize;
+} MacfbNubusDeviceClass;
+
+#define TYPE_NUBUS_MACFB "nubus-macfb"
+#define NUBUS_MACFB(obj) \
+ OBJECT_CHECK(MacfbNubusState, (obj), TYPE_NUBUS_MACFB)
+
+typedef struct {
+ NubusDevice busdev;
+
+ MacfbState macfb;
+} MacfbNubusState;
+
+#endif
diff --git a/arch_init.c b/arch_init.c
index 0a1531124c..705d0b94ad 100644
--- a/arch_init.c
+++ b/arch_init.c
@@ -38,6 +38,10 @@
int graphic_width = 1024;
int graphic_height = 768;
int graphic_depth = 8;
+#elif defined(TARGET_M68K)
+int graphic_width = 800;
+int graphic_height = 600;
+int graphic_depth = 8;
#else
int graphic_width = 800;
int graphic_height = 600;
diff --git a/hw/display/macfb.c b/hw/display/macfb.c
new file mode 100644
index 0000000000..f4fa8e3206
--- /dev/null
+++ b/hw/display/macfb.c
@@ -0,0 +1,477 @@
+/*
+ * QEMU Motorola 680x0 Macintosh Video Card Emulation
+ * Copyright (c) 2012-2018 Laurent Vivier
+ *
+ * some parts from QEMU G364 framebuffer Emulator.
+ * Copyright (c) 2007-2011 Herve Poussineau
+ *
+ * This work is licensed under the terms of the GNU GPL, version 2 or later.
+ * See the COPYING file in the top-level directory.
+ *
+ */
+
+#include "qemu/osdep.h"
+#include "qemu/units.h"
+#include "hw/sysbus.h"
+#include "ui/console.h"
+#include "ui/pixel_ops.h"
+#include "hw/nubus/nubus.h"
+#include "hw/display/macfb.h"
+#include "qapi/error.h"
+#include "hw/qdev-properties.h"
+#include "migration/vmstate.h"
+
+#define VIDEO_BASE 0x00001000
+#define DAFB_BASE 0x00800000
+
+#define MACFB_PAGE_SIZE 4096
+#define MACFB_VRAM_SIZE (4 * MiB)
+
+#define DAFB_RESET 0x200
+#define DAFB_LUT 0x213
+
+
+typedef void macfb_draw_line_func(MacfbState *s, uint8_t *d, uint32_t addr,
+ int width);
+
+static inline uint8_t macfb_read_byte(MacfbState *s, uint32_t addr)
+{
+ return s->vram[addr & s->vram_bit_mask];
+}
+
+/* 1-bit color */
+static void macfb_draw_line1(MacfbState *s, uint8_t *d, uint32_t addr,
+ int width)
+{
+ uint8_t r, g, b;
+ int x;
+
+ for (x = 0; x < width; x++) {
+ int bit = x & 7;
+ int idx = (macfb_read_byte(s, addr) >> (7 - bit)) & 1;
+ r = g = b = ((1 - idx) << 7);
+ addr += (bit == 7);
+
+ *(uint32_t *)d = rgb_to_pixel32(r, g, b);
+ d += 4;
+ }
+}
+
+/* 2-bit color */
+static void macfb_draw_line2(MacfbState *s, uint8_t *d, uint32_t addr,
+ int width)
+{
+ uint8_t r, g, b;
+ int x;
+
+ for (x = 0; x < width; x++) {
+ int bit = (x & 3);
+ int idx = (macfb_read_byte(s, addr) >> ((3 - bit) << 1)) & 3;
+ r = s->color_palette[idx * 3];
+ g = s->color_palette[idx * 3 + 1];
+ b = s->color_palette[idx * 3 + 2];
+ addr += (bit == 3);
+
+ *(uint32_t *)d = rgb_to_pixel32(r, g, b);
+ d += 4;
+ }
+}
+
+/* 4-bit color */
+static void macfb_draw_line4(MacfbState *s, uint8_t *d, uint32_t addr,
+ int width)
+{
+ uint8_t r, g, b;
+ int x;
+
+ for (x = 0; x < width; x++) {
+ int bit = x & 1;
+ int idx = (macfb_read_byte(s, addr) >> ((1 - bit) << 2)) & 15;
+ r = s->color_palette[idx * 3];
+ g = s->color_palette[idx * 3 + 1];
+ b = s->color_palette[idx * 3 + 2];
+ addr += (bit == 1);
+
+ *(uint32_t *)d = rgb_to_pixel32(r, g, b);
+ d += 4;
+ }
+}
+
+/* 8-bit color */
+static void macfb_draw_line8(MacfbState *s, uint8_t *d, uint32_t addr,
+ int width)
+{
+ uint8_t r, g, b;
+ int x;
+
+ for (x = 0; x < width; x++) {
+ r = s->color_palette[macfb_read_byte(s, addr) * 3];
+ g = s->color_palette[macfb_read_byte(s, addr) * 3 + 1];
+ b = s->color_palette[macfb_read_byte(s, addr) * 3 + 2];
+ addr++;
+
+ *(uint32_t *)d = rgb_to_pixel32(r, g, b);
+ d += 4;
+ }
+}
+
+/* 16-bit color */
+static void macfb_draw_line16(MacfbState *s, uint8_t *d, uint32_t addr,
+ int width)
+{
+ uint8_t r, g, b;
+ int x;
+
+ for (x = 0; x < width; x++) {
+ uint16_t pixel;
+ pixel = (macfb_read_byte(s, addr) << 8) | macfb_read_byte(s, addr + 1);
+ r = ((pixel >> 10) & 0x1f) << 3;
+ g = ((pixel >> 5) & 0x1f) << 3;
+ b = (pixel & 0x1f) << 3;
+ addr += 2;
+
+ *(uint32_t *)d = rgb_to_pixel32(r, g, b);
+ d += 4;
+ }
+}
+
+/* 24-bit color */
+static void macfb_draw_line24(MacfbState *s, uint8_t *d, uint32_t addr,
+ int width)
+{
+ uint8_t r, g, b;
+ int x;
+
+ for (x = 0; x < width; x++) {
+ r = macfb_read_byte(s, addr);
+ g = macfb_read_byte(s, addr + 1);
+ b = macfb_read_byte(s, addr + 2);
+ addr += 3;
+
+ *(uint32_t *)d = rgb_to_pixel32(r, g, b);
+ d += 4;
+ }
+}
+
+
+enum {
+ MACFB_DRAW_LINE1,
+ MACFB_DRAW_LINE2,
+ MACFB_DRAW_LINE4,
+ MACFB_DRAW_LINE8,
+ MACFB_DRAW_LINE16,
+ MACFB_DRAW_LINE24,
+ MACFB_DRAW_LINE_NB,
+};
+
+static macfb_draw_line_func * const
+ macfb_draw_line_table[MACFB_DRAW_LINE_NB] = {
+ macfb_draw_line1,
+ macfb_draw_line2,
+ macfb_draw_line4,
+ macfb_draw_line8,
+ macfb_draw_line16,
+ macfb_draw_line24,
+};
+
+static int macfb_check_dirty(MacfbState *s, DirtyBitmapSnapshot *snap,
+ ram_addr_t addr, int len)
+{
+ return memory_region_snapshot_get_dirty(&s->mem_vram, snap, addr, len);
+}
+
+static void macfb_draw_graphic(MacfbState *s)
+{
+ DisplaySurface *surface = qemu_console_surface(s->con);
+ DirtyBitmapSnapshot *snap = NULL;
+ ram_addr_t page;
+ uint32_t v = 0;
+ int y, ymin;
+ int macfb_stride = (s->depth * s->width + 7) / 8;
+ macfb_draw_line_func *macfb_draw_line;
+
+ switch (s->depth) {
+ case 1:
+ v = MACFB_DRAW_LINE1;
+ break;
+ case 2:
+ v = MACFB_DRAW_LINE2;
+ break;
+ case 4:
+ v = MACFB_DRAW_LINE4;
+ break;
+ case 8:
+ v = MACFB_DRAW_LINE8;
+ break;
+ case 16:
+ v = MACFB_DRAW_LINE16;
+ break;
+ case 24:
+ v = MACFB_DRAW_LINE24;
+ break;
+ }
+
+ macfb_draw_line = macfb_draw_line_table[v];
+ assert(macfb_draw_line != NULL);
+
+ snap = memory_region_snapshot_and_clear_dirty(&s->mem_vram, 0x0,
+ memory_region_size(&s->mem_vram),
+ DIRTY_MEMORY_VGA);
+
+ ymin = -1;
+ page = 0;
+ for (y = 0; y < s->height; y++, page += macfb_stride) {
+ if (macfb_check_dirty(s, snap, page, macfb_stride)) {
+ uint8_t *data_display;
+
+ data_display = surface_data(surface) + y * surface_stride(surface);
+ macfb_draw_line(s, data_display, page, s->width);
+
+ if (ymin < 0) {
+ ymin = y;
+ }
+ } else {
+ if (ymin >= 0) {
+ dpy_gfx_update(s->con, 0, ymin, s->width, y - ymin);
+ ymin = -1;
+ }
+ }
+ }
+
+ if (ymin >= 0) {
+ dpy_gfx_update(s->con, 0, ymin, s->width, y - ymin);
+ }
+
+ g_free(snap);
+}
+
+static void macfb_invalidate_display(void *opaque)
+{
+ MacfbState *s = opaque;
+
+ memory_region_set_dirty(&s->mem_vram, 0, MACFB_VRAM_SIZE);
+}
+
+static void macfb_update_display(void *opaque)
+{
+ MacfbState *s = opaque;
+ DisplaySurface *surface = qemu_console_surface(s->con);
+
+ qemu_flush_coalesced_mmio_buffer();
+
+ if (s->width == 0 || s->height == 0) {
+ return;
+ }
+
+ if (s->width != surface_width(surface) ||
+ s->height != surface_height(surface)) {
+ qemu_console_resize(s->con, s->width, s->height);
+ }
+
+ macfb_draw_graphic(s);
+}
+
+static void macfb_reset(MacfbState *s)
+{
+ int i;
+
+ s->palette_current = 0;
+ for (i = 0; i < 256; i++) {
+ s->color_palette[i * 3] = 255 - i;
+ s->color_palette[i * 3 + 1] = 255 - i;
+ s->color_palette[i * 3 + 2] = 255 - i;
+ }
+ memset(s->vram, 0, MACFB_VRAM_SIZE);
+ macfb_invalidate_display(s);
+}
+
+static uint64_t macfb_ctrl_read(void *opaque,
+ hwaddr addr,
+ unsigned int size)
+{
+ return 0;
+}
+
+static void macfb_ctrl_write(void *opaque,
+ hwaddr addr,
+ uint64_t val,
+ unsigned int size)
+{
+ MacfbState *s = opaque;
+ switch (addr) {
+ case DAFB_RESET:
+ s->palette_current = 0;
+ break;
+ case DAFB_LUT:
+ s->color_palette[s->palette_current++] = val;
+ if (s->palette_current % 3) {
+ macfb_invalidate_display(s);
+ }
+ break;
+ }
+}
+
+static const MemoryRegionOps macfb_ctrl_ops = {
+ .read = macfb_ctrl_read,
+ .write = macfb_ctrl_write,
+ .endianness = DEVICE_BIG_ENDIAN,
+ .impl.min_access_size = 1,
+ .impl.max_access_size = 4,
+};
+
+static int macfb_post_load(void *opaque, int version_id)
+{
+ macfb_invalidate_display(opaque);
+ return 0;
+}
+
+static const VMStateDescription vmstate_macfb = {
+ .name = "macfb",
+ .version_id = 1,
+ .minimum_version_id = 1,
+ .minimum_version_id_old = 1,
+ .post_load = macfb_post_load,
+ .fields = (VMStateField[]) {
+ VMSTATE_UINT8_ARRAY(color_palette, MacfbState, 256 * 3),
+ VMSTATE_UINT32(palette_current, MacfbState),
+ VMSTATE_END_OF_LIST()
+ }
+};
+
+static const GraphicHwOps macfb_ops = {
+ .invalidate = macfb_invalidate_display,
+ .gfx_update = macfb_update_display,
+};
+
+static void macfb_common_realize(DeviceState *dev, MacfbState *s, Error **errp)
+{
+ DisplaySurface *surface;
+
+ if (s->depth != 1 && s->depth != 2 && s->depth != 4 && s->depth != 8 &&
+ s->depth != 16 && s->depth != 24) {
+ error_setg(errp, "unknown guest depth %d", s->depth);
+ return;
+ }
+
+ s->con = graphic_console_init(dev, 0, &macfb_ops, s);
+ surface = qemu_console_surface(s->con);
+
+ if (surface_bits_per_pixel(surface) != 32) {
+ error_setg(errp, "unknown host depth %d",
+ surface_bits_per_pixel(surface));
+ return;
+ }
+
+ memory_region_init_io(&s->mem_ctrl, NULL, &macfb_ctrl_ops, s, "macfb-ctrl",
+ 0x1000);
+
+ memory_region_init_ram_nomigrate(&s->mem_vram, OBJECT(s), "macfb-vram",
+ MACFB_VRAM_SIZE, errp);
+ s->vram = memory_region_get_ram_ptr(&s->mem_vram);
+ s->vram_bit_mask = MACFB_VRAM_SIZE - 1;
+ vmstate_register_ram(&s->mem_vram, dev);
+ memory_region_set_coalescing(&s->mem_vram);
+}
+
+static void macfb_sysbus_realize(DeviceState *dev, Error **errp)
+{
+ MacfbSysBusState *s = MACFB(dev);
+ MacfbState *ms = &s->macfb;
+
+ macfb_common_realize(dev, ms, errp);
+ sysbus_init_mmio(SYS_BUS_DEVICE(s), &ms->mem_ctrl);
+ sysbus_init_mmio(SYS_BUS_DEVICE(s), &ms->mem_vram);
+}
+
+const uint8_t macfb_rom[] = {
+ 255, 0, 0, 0,
+};
+
+static void macfb_nubus_realize(DeviceState *dev, Error **errp)
+{
+ NubusDevice *nd = NUBUS_DEVICE(dev);
+ MacfbNubusState *s = NUBUS_MACFB(dev);
+ MacfbNubusDeviceClass *ndc = MACFB_NUBUS_GET_CLASS(dev);
+ MacfbState *ms = &s->macfb;
+
+ ndc->parent_realize(dev, errp);
+
+ macfb_common_realize(dev, ms, errp);
+ memory_region_add_subregion(&nd->slot_mem, DAFB_BASE, &ms->mem_ctrl);
+ memory_region_add_subregion(&nd->slot_mem, VIDEO_BASE, &ms->mem_vram);
+
+ nubus_register_rom(nd, macfb_rom, sizeof(macfb_rom), 1, 9, 0xf);
+}
+
+static void macfb_sysbus_reset(DeviceState *d)
+{
+ MacfbSysBusState *s = MACFB(d);
+ macfb_reset(&s->macfb);
+}
+
+static void macfb_nubus_reset(DeviceState *d)
+{
+ MacfbNubusState *s = NUBUS_MACFB(d);
+ macfb_reset(&s->macfb);
+}
+
+static Property macfb_sysbus_properties[] = {
+ DEFINE_PROP_UINT32("width", MacfbSysBusState, macfb.width, 640),
+ DEFINE_PROP_UINT32("height", MacfbSysBusState, macfb.height, 480),
+ DEFINE_PROP_UINT8("depth", MacfbSysBusState, macfb.depth, 8),
+ DEFINE_PROP_END_OF_LIST(),
+};
+
+static Property macfb_nubus_properties[] = {
+ DEFINE_PROP_UINT32("width", MacfbNubusState, macfb.width, 640),
+ DEFINE_PROP_UINT32("height", MacfbNubusState, macfb.height, 480),
+ DEFINE_PROP_UINT8("depth", MacfbNubusState, macfb.depth, 8),
+ DEFINE_PROP_END_OF_LIST(),
+};
+
+static void macfb_sysbus_class_init(ObjectClass *klass, void *data)
+{
+ DeviceClass *dc = DEVICE_CLASS(klass);
+
+ dc->realize = macfb_sysbus_realize;
+ dc->desc = "SysBus Macintosh framebuffer";
+ dc->reset = macfb_sysbus_reset;
+ dc->vmsd = &vmstate_macfb;
+ dc->props = macfb_sysbus_properties;
+}
+
+static void macfb_nubus_class_init(ObjectClass *klass, void *data)
+{
+ DeviceClass *dc = DEVICE_CLASS(klass);
+ MacfbNubusDeviceClass *ndc = MACFB_NUBUS_DEVICE_CLASS(klass);
+
+ device_class_set_parent_realize(dc, macfb_nubus_realize,
+ &ndc->parent_realize);
+ dc->desc = "Nubus Macintosh framebuffer";
+ dc->reset = macfb_nubus_reset;
+ dc->vmsd = &vmstate_macfb;
+ dc->props = macfb_nubus_properties;
+}
+
+static TypeInfo macfb_sysbus_info = {
+ .name = TYPE_MACFB,
+ .parent = TYPE_SYS_BUS_DEVICE,
+ .instance_size = sizeof(MacfbSysBusState),
+ .class_init = macfb_sysbus_class_init,
+};
+
+static TypeInfo macfb_nubus_info = {
+ .name = TYPE_NUBUS_MACFB,
+ .parent = TYPE_NUBUS_DEVICE,
+ .instance_size = sizeof(MacfbNubusState),
+ .class_init = macfb_nubus_class_init,
+ .class_size = sizeof(MacfbNubusDeviceClass),
+};
+
+static void macfb_register_types(void)
+{
+ type_register_static(&macfb_sysbus_info);
+ type_register_static(&macfb_nubus_info);
+}
+
+type_init(macfb_register_types)
diff --git a/vl.c b/vl.c
index 4489cfb2bb..59e82fba35 100644
--- a/vl.c
+++ b/vl.c
@@ -3226,7 +3226,8 @@ int main(int argc, char **argv, char **envp)
if (*p == 'x') {
p++;
depth = strtol(p, (char **)&p, 10);
- if (depth != 8 && depth != 15 && depth != 16 &&
+ if (depth != 1 && depth != 2 && depth != 4 &&
+ depth != 8 && depth != 15 && depth != 16 &&
depth != 24 && depth != 32)
goto graphic_error;
} else if (*p == '\0') {
diff --git a/MAINTAINERS b/MAINTAINERS
index 7892ab5f02..bd0df67e62 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -922,8 +922,10 @@ M: Laurent Vivier <laurent@vivier.eu>
S: Maintained
F: hw/misc/mac_via.c
F: hw/nubus/*
+F: hw/display/macfb.c
F: include/hw/misc/mac_via.h
F: include/hw/nubus/*
+F: include/hw/display/macfb.h
MicroBlaze Machines
-------------------
diff --git a/hw/display/Kconfig b/hw/display/Kconfig
index cbdf7b1a67..c500d1fc6d 100644
--- a/hw/display/Kconfig
+++ b/hw/display/Kconfig
@@ -132,3 +132,8 @@ config ATI_VGA
select VGA
select BITBANG_I2C
select DDC
+
+config MACFB
+ bool
+ select FRAMEBUFFER
+ depends on NUBUS
diff --git a/hw/display/Makefile.objs b/hw/display/Makefile.objs
index 5a4066383b..f2182e3bef 100644
--- a/hw/display/Makefile.objs
+++ b/hw/display/Makefile.objs
@@ -26,6 +26,7 @@ common-obj-$(CONFIG_EXYNOS4) += exynos4210_fimd.o
common-obj-$(CONFIG_FRAMEBUFFER) += framebuffer.o
obj-$(CONFIG_MILKYMIST) += milkymist-vgafb.o
common-obj-$(CONFIG_ZAURUS) += tc6393xb.o
+common-obj-$(CONFIG_MACFB) += macfb.o
obj-$(CONFIG_MILKYMIST_TMU2) += milkymist-tmu2.o
milkymist-tmu2.o-cflags := $(X11_CFLAGS) $(OPENGL_CFLAGS)
diff --git a/hw/m68k/Kconfig b/hw/m68k/Kconfig
index 947cd42c01..ef4917dee6 100644
--- a/hw/m68k/Kconfig
+++ b/hw/m68k/Kconfig
@@ -17,3 +17,4 @@ config Q800
bool
select MAC_VIA
select NUBUS
+ select MACFB
diff --git a/qemu-options.hx b/qemu-options.hx
index 996b6fba74..1c5bc8ae99 100644
--- a/qemu-options.hx
+++ b/qemu-options.hx
@@ -1839,7 +1839,7 @@ ETEXI
DEF("g", 1, QEMU_OPTION_g ,
"-g WxH[xDEPTH] Set the initial graphical resolution and depth\n",
- QEMU_ARCH_PPC | QEMU_ARCH_SPARC)
+ QEMU_ARCH_PPC | QEMU_ARCH_SPARC | QEMU_ARCH_M68K)
STEXI
@item -g @var{width}x@var{height}[x@var{depth}]
@findex -g
--
2.21.0
^ permalink raw reply related [flat|nested] 27+ messages in thread
* [PULL 09/11] hw/m68k: add a dummy SWIM floppy controller
2019-10-28 18:16 [PULL 00/11] Q800 branch patches Laurent Vivier
` (7 preceding siblings ...)
2019-10-28 18:16 ` [PULL 08/11] hw/m68k: add Nubus macfb video card Laurent Vivier
@ 2019-10-28 18:16 ` Laurent Vivier
2019-10-28 18:16 ` [PULL 10/11] hw/m68k: define Macintosh Quadra 800 Laurent Vivier
` (3 subsequent siblings)
12 siblings, 0 replies; 27+ messages in thread
From: Laurent Vivier @ 2019-10-28 18:16 UTC (permalink / raw)
To: qemu-devel
Cc: Fam Zheng, Kevin Wolf, qemu-block, Jason Wang, Mark Cave-Ayland,
Laurent Vivier, Max Reitz, Hervé Poussineau, Paolo Bonzini
SWIM (Sander-Wozniak Integrated Machine) is the floppy controller of
the 680x0 Macintosh.
This patch introduces only the basic support: it allows to switch from
IWM (Integrated WOZ Machine) mode to the SWIM mode and makes the linux
driver happy.
It cannot read any floppy image.
Co-developed-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Reviewed-by: Hervé Poussineau <hpoussin@reactos.org>
Message-Id: <20191026164546.30020-10-laurent@vivier.eu>
---
include/hw/block/swim.h | 76 +++++++
hw/block/swim.c | 489 ++++++++++++++++++++++++++++++++++++++++
MAINTAINERS | 2 +
hw/block/Kconfig | 3 +
hw/block/Makefile.objs | 1 +
hw/m68k/Kconfig | 1 +
6 files changed, 572 insertions(+)
create mode 100644 include/hw/block/swim.h
create mode 100644 hw/block/swim.c
diff --git a/include/hw/block/swim.h b/include/hw/block/swim.h
new file mode 100644
index 0000000000..6add3499d0
--- /dev/null
+++ b/include/hw/block/swim.h
@@ -0,0 +1,76 @@
+/*
+ * QEMU Macintosh floppy disk controller emulator (SWIM)
+ *
+ * Copyright (c) 2014-2018 Laurent Vivier <laurent@vivier.eu>
+ *
+ * This work is licensed under the terms of the GNU GPL, version 2. See
+ * the COPYING file in the top-level directory.
+ *
+ */
+
+#ifndef SWIM_H
+#define SWIM_H
+
+#include "qemu/osdep.h"
+#include "hw/sysbus.h"
+
+#define SWIM_MAX_FD 2
+
+typedef struct SWIMDrive SWIMDrive;
+typedef struct SWIMBus SWIMBus;
+typedef struct SWIMCtrl SWIMCtrl;
+
+#define TYPE_SWIM_DRIVE "swim-drive"
+#define SWIM_DRIVE(obj) OBJECT_CHECK(SWIMDrive, (obj), TYPE_SWIM_DRIVE)
+
+struct SWIMDrive {
+ DeviceState qdev;
+ int32_t unit;
+ BlockConf conf;
+};
+
+#define TYPE_SWIM_BUS "swim-bus"
+#define SWIM_BUS(obj) OBJECT_CHECK(SWIMBus, (obj), TYPE_SWIM_BUS)
+
+struct SWIMBus {
+ BusState bus;
+ struct SWIMCtrl *ctrl;
+};
+
+typedef struct FDrive {
+ SWIMCtrl *swimctrl;
+ BlockBackend *blk;
+ BlockConf *conf;
+} FDrive;
+
+struct SWIMCtrl {
+ MemoryRegion iomem;
+ FDrive drives[SWIM_MAX_FD];
+ int mode;
+ /* IWM mode */
+ int iwm_switch;
+ uint16_t regs[8];
+#define IWM_PH0 0
+#define IWM_PH1 1
+#define IWM_PH2 2
+#define IWM_PH3 3
+#define IWM_MTR 4
+#define IWM_DRIVE 5
+#define IWM_Q6 6
+#define IWM_Q7 7
+ uint8_t iwm_data;
+ uint8_t iwm_mode;
+ /* SWIM mode */
+ uint8_t swim_phase;
+ uint8_t swim_mode;
+ SWIMBus bus;
+};
+
+#define TYPE_SWIM "swim"
+#define SWIM(obj) OBJECT_CHECK(SWIM, (obj), TYPE_SWIM)
+
+typedef struct SWIM {
+ SysBusDevice parent_obj;
+ SWIMCtrl ctrl;
+} SWIM;
+#endif
diff --git a/hw/block/swim.c b/hw/block/swim.c
new file mode 100644
index 0000000000..c6d117e89b
--- /dev/null
+++ b/hw/block/swim.c
@@ -0,0 +1,489 @@
+/*
+ * QEMU Macintosh floppy disk controller emulator (SWIM)
+ *
+ * Copyright (c) 2014-2018 Laurent Vivier <laurent@vivier.eu>
+ *
+ * This work is licensed under the terms of the GNU GPL, version 2. See
+ * the COPYING file in the top-level directory.
+ *
+ * Only the basic support: it allows to switch from IWM (Integrated WOZ
+ * Machine) mode to the SWIM mode and makes the linux driver happy.
+ */
+
+#include "qemu/osdep.h"
+#include "qemu/main-loop.h"
+#include "qapi/error.h"
+#include "sysemu/block-backend.h"
+#include "hw/sysbus.h"
+#include "migration/vmstate.h"
+#include "hw/block/block.h"
+#include "hw/block/swim.h"
+#include "hw/qdev-properties.h"
+
+/* IWM registers */
+
+#define IWM_PH0L 0
+#define IWM_PH0H 1
+#define IWM_PH1L 2
+#define IWM_PH1H 3
+#define IWM_PH2L 4
+#define IWM_PH2H 5
+#define IWM_PH3L 6
+#define IWM_PH3H 7
+#define IWM_MTROFF 8
+#define IWM_MTRON 9
+#define IWM_INTDRIVE 10
+#define IWM_EXTDRIVE 11
+#define IWM_Q6L 12
+#define IWM_Q6H 13
+#define IWM_Q7L 14
+#define IWM_Q7H 15
+
+/* SWIM registers */
+
+#define SWIM_WRITE_DATA 0
+#define SWIM_WRITE_MARK 1
+#define SWIM_WRITE_CRC 2
+#define SWIM_WRITE_PARAMETER 3
+#define SWIM_WRITE_PHASE 4
+#define SWIM_WRITE_SETUP 5
+#define SWIM_WRITE_MODE0 6
+#define SWIM_WRITE_MODE1 7
+
+#define SWIM_READ_DATA 8
+#define SWIM_READ_MARK 9
+#define SWIM_READ_ERROR 10
+#define SWIM_READ_PARAMETER 11
+#define SWIM_READ_PHASE 12
+#define SWIM_READ_SETUP 13
+#define SWIM_READ_STATUS 14
+#define SWIM_READ_HANDSHAKE 15
+
+#define REG_SHIFT 9
+
+#define SWIM_MODE_IWM 0
+#define SWIM_MODE_SWIM 1
+
+/* bits in phase register */
+
+#define SWIM_SEEK_NEGATIVE 0x074
+#define SWIM_STEP 0x071
+#define SWIM_MOTOR_ON 0x072
+#define SWIM_MOTOR_OFF 0x076
+#define SWIM_INDEX 0x073
+#define SWIM_EJECT 0x077
+#define SWIM_SETMFM 0x171
+#define SWIM_SETGCR 0x175
+#define SWIM_RELAX 0x033
+#define SWIM_LSTRB 0x008
+#define SWIM_CA_MASK 0x077
+
+/* Select values for swim_select and swim_readbit */
+
+#define SWIM_READ_DATA_0 0x074
+#define SWIM_TWOMEG_DRIVE 0x075
+#define SWIM_SINGLE_SIDED 0x076
+#define SWIM_DRIVE_PRESENT 0x077
+#define SWIM_DISK_IN 0x170
+#define SWIM_WRITE_PROT 0x171
+#define SWIM_TRACK_ZERO 0x172
+#define SWIM_TACHO 0x173
+#define SWIM_READ_DATA_1 0x174
+#define SWIM_MFM_MODE 0x175
+#define SWIM_SEEK_COMPLETE 0x176
+#define SWIM_ONEMEG_MEDIA 0x177
+
+/* Bits in handshake register */
+
+#define SWIM_MARK_BYTE 0x01
+#define SWIM_CRC_ZERO 0x02
+#define SWIM_RDDATA 0x04
+#define SWIM_SENSE 0x08
+#define SWIM_MOTEN 0x10
+#define SWIM_ERROR 0x20
+#define SWIM_DAT2BYTE 0x40
+#define SWIM_DAT1BYTE 0x80
+
+/* bits in setup register */
+
+#define SWIM_S_INV_WDATA 0x01
+#define SWIM_S_3_5_SELECT 0x02
+#define SWIM_S_GCR 0x04
+#define SWIM_S_FCLK_DIV2 0x08
+#define SWIM_S_ERROR_CORR 0x10
+#define SWIM_S_IBM_DRIVE 0x20
+#define SWIM_S_GCR_WRITE 0x40
+#define SWIM_S_TIMEOUT 0x80
+
+/* bits in mode register */
+
+#define SWIM_CLFIFO 0x01
+#define SWIM_ENBL1 0x02
+#define SWIM_ENBL2 0x04
+#define SWIM_ACTION 0x08
+#define SWIM_WRITE_MODE 0x10
+#define SWIM_HEDSEL 0x20
+#define SWIM_MOTON 0x80
+
+static void fd_recalibrate(FDrive *drive)
+{
+}
+
+static void swim_change_cb(void *opaque, bool load, Error **errp)
+{
+ FDrive *drive = opaque;
+
+ if (!load) {
+ blk_set_perm(drive->blk, 0, BLK_PERM_ALL, &error_abort);
+ } else {
+ if (!blkconf_apply_backend_options(drive->conf,
+ blk_is_read_only(drive->blk), false,
+ errp)) {
+ return;
+ }
+ }
+}
+
+static const BlockDevOps swim_block_ops = {
+ .change_media_cb = swim_change_cb,
+};
+
+static Property swim_drive_properties[] = {
+ DEFINE_PROP_INT32("unit", SWIMDrive, unit, -1),
+ DEFINE_BLOCK_PROPERTIES(SWIMDrive, conf),
+ DEFINE_PROP_END_OF_LIST(),
+};
+
+static void swim_drive_realize(DeviceState *qdev, Error **errp)
+{
+ SWIMDrive *dev = SWIM_DRIVE(qdev);
+ SWIMBus *bus = SWIM_BUS(qdev->parent_bus);
+ FDrive *drive;
+ int ret;
+
+ if (dev->unit == -1) {
+ for (dev->unit = 0; dev->unit < SWIM_MAX_FD; dev->unit++) {
+ drive = &bus->ctrl->drives[dev->unit];
+ if (!drive->blk) {
+ break;
+ }
+ }
+ }
+
+ if (dev->unit >= SWIM_MAX_FD) {
+ error_setg(errp, "Can't create floppy unit %d, bus supports "
+ "only %d units", dev->unit, SWIM_MAX_FD);
+ return;
+ }
+
+ drive = &bus->ctrl->drives[dev->unit];
+ if (drive->blk) {
+ error_setg(errp, "Floppy unit %d is in use", dev->unit);
+ return;
+ }
+
+ if (!dev->conf.blk) {
+ /* Anonymous BlockBackend for an empty drive */
+ dev->conf.blk = blk_new(qemu_get_aio_context(), 0, BLK_PERM_ALL);
+ ret = blk_attach_dev(dev->conf.blk, qdev);
+ assert(ret == 0);
+ }
+
+ blkconf_blocksizes(&dev->conf);
+ if (dev->conf.logical_block_size != 512 ||
+ dev->conf.physical_block_size != 512)
+ {
+ error_setg(errp, "Physical and logical block size must "
+ "be 512 for floppy");
+ return;
+ }
+
+ /*
+ * rerror/werror aren't supported by fdc and therefore not even registered
+ * with qdev. So set the defaults manually before they are used in
+ * blkconf_apply_backend_options().
+ */
+ dev->conf.rerror = BLOCKDEV_ON_ERROR_AUTO;
+ dev->conf.werror = BLOCKDEV_ON_ERROR_AUTO;
+
+ if (!blkconf_apply_backend_options(&dev->conf,
+ blk_is_read_only(dev->conf.blk),
+ false, errp)) {
+ return;
+ }
+
+ /*
+ * 'enospc' is the default for -drive, 'report' is what blk_new() gives us
+ * for empty drives.
+ */
+ if (blk_get_on_error(dev->conf.blk, 0) != BLOCKDEV_ON_ERROR_ENOSPC &&
+ blk_get_on_error(dev->conf.blk, 0) != BLOCKDEV_ON_ERROR_REPORT) {
+ error_setg(errp, "fdc doesn't support drive option werror");
+ return;
+ }
+ if (blk_get_on_error(dev->conf.blk, 1) != BLOCKDEV_ON_ERROR_REPORT) {
+ error_setg(errp, "fdc doesn't support drive option rerror");
+ return;
+ }
+
+ drive->conf = &dev->conf;
+ drive->blk = dev->conf.blk;
+ drive->swimctrl = bus->ctrl;
+
+ blk_set_dev_ops(drive->blk, &swim_block_ops, drive);
+}
+
+static void swim_drive_class_init(ObjectClass *klass, void *data)
+{
+ DeviceClass *k = DEVICE_CLASS(klass);
+ k->realize = swim_drive_realize;
+ set_bit(DEVICE_CATEGORY_STORAGE, k->categories);
+ k->bus_type = TYPE_SWIM_BUS;
+ k->props = swim_drive_properties;
+ k->desc = "virtual SWIM drive";
+}
+
+static const TypeInfo swim_drive_info = {
+ .name = TYPE_SWIM_DRIVE,
+ .parent = TYPE_DEVICE,
+ .instance_size = sizeof(SWIMDrive),
+ .class_init = swim_drive_class_init,
+};
+
+static const TypeInfo swim_bus_info = {
+ .name = TYPE_SWIM_BUS,
+ .parent = TYPE_BUS,
+ .instance_size = sizeof(SWIMBus),
+};
+
+static void iwmctrl_write(void *opaque, hwaddr reg, uint64_t value,
+ unsigned size)
+{
+ SWIMCtrl *swimctrl = opaque;
+
+ reg >>= REG_SHIFT;
+
+ swimctrl->regs[reg >> 1] = reg & 1;
+
+ if (swimctrl->regs[IWM_Q6] &&
+ swimctrl->regs[IWM_Q7]) {
+ if (swimctrl->regs[IWM_MTR]) {
+ /* data register */
+ swimctrl->iwm_data = value;
+ } else {
+ /* mode register */
+ swimctrl->iwm_mode = value;
+ /* detect sequence to switch from IWM mode to SWIM mode */
+ switch (swimctrl->iwm_switch) {
+ case 0:
+ if (value == 0x57) {
+ swimctrl->iwm_switch++;
+ }
+ break;
+ case 1:
+ if (value == 0x17) {
+ swimctrl->iwm_switch++;
+ }
+ break;
+ case 2:
+ if (value == 0x57) {
+ swimctrl->iwm_switch++;
+ }
+ break;
+ case 3:
+ if (value == 0x57) {
+ swimctrl->mode = SWIM_MODE_SWIM;
+ swimctrl->iwm_switch = 0;
+ }
+ break;
+ }
+ }
+ }
+}
+
+static uint64_t iwmctrl_read(void *opaque, hwaddr reg, unsigned size)
+{
+ SWIMCtrl *swimctrl = opaque;
+
+ reg >>= REG_SHIFT;
+
+ swimctrl->regs[reg >> 1] = reg & 1;
+
+ return 0;
+}
+
+static void swimctrl_write(void *opaque, hwaddr reg, uint64_t value,
+ unsigned size)
+{
+ SWIMCtrl *swimctrl = opaque;
+
+ if (swimctrl->mode == SWIM_MODE_IWM) {
+ iwmctrl_write(opaque, reg, value, size);
+ return;
+ }
+
+ reg >>= REG_SHIFT;
+
+ switch (reg) {
+ case SWIM_WRITE_PHASE:
+ swimctrl->swim_phase = value;
+ break;
+ case SWIM_WRITE_MODE0:
+ swimctrl->swim_mode &= ~value;
+ break;
+ case SWIM_WRITE_MODE1:
+ swimctrl->swim_mode |= value;
+ break;
+ case SWIM_WRITE_DATA:
+ case SWIM_WRITE_MARK:
+ case SWIM_WRITE_CRC:
+ case SWIM_WRITE_PARAMETER:
+ case SWIM_WRITE_SETUP:
+ break;
+ }
+}
+
+static uint64_t swimctrl_read(void *opaque, hwaddr reg, unsigned size)
+{
+ SWIMCtrl *swimctrl = opaque;
+ uint32_t value = 0;
+
+ if (swimctrl->mode == SWIM_MODE_IWM) {
+ return iwmctrl_read(opaque, reg, size);
+ }
+
+ reg >>= REG_SHIFT;
+
+ switch (reg) {
+ case SWIM_READ_PHASE:
+ value = swimctrl->swim_phase;
+ break;
+ case SWIM_READ_HANDSHAKE:
+ if (swimctrl->swim_phase == SWIM_DRIVE_PRESENT) {
+ /* always answer "no drive present" */
+ value = SWIM_SENSE;
+ }
+ break;
+ case SWIM_READ_DATA:
+ case SWIM_READ_MARK:
+ case SWIM_READ_ERROR:
+ case SWIM_READ_PARAMETER:
+ case SWIM_READ_SETUP:
+ case SWIM_READ_STATUS:
+ break;
+ }
+
+ return value;
+}
+
+static const MemoryRegionOps swimctrl_mem_ops = {
+ .write = swimctrl_write,
+ .read = swimctrl_read,
+ .endianness = DEVICE_NATIVE_ENDIAN,
+};
+
+static void sysbus_swim_reset(DeviceState *d)
+{
+ SWIM *sys = SWIM(d);
+ SWIMCtrl *ctrl = &sys->ctrl;
+ int i;
+
+ ctrl->mode = 0;
+ ctrl->iwm_switch = 0;
+ for (i = 0; i < 8; i++) {
+ ctrl->regs[i] = 0;
+ }
+ ctrl->iwm_data = 0;
+ ctrl->iwm_mode = 0;
+ ctrl->swim_phase = 0;
+ ctrl->swim_mode = 0;
+ for (i = 0; i < SWIM_MAX_FD; i++) {
+ fd_recalibrate(&ctrl->drives[i]);
+ }
+}
+
+static void sysbus_swim_init(Object *obj)
+{
+ SysBusDevice *sbd = SYS_BUS_DEVICE(obj);
+ SWIM *sbs = SWIM(obj);
+ SWIMCtrl *swimctrl = &sbs->ctrl;
+
+ memory_region_init_io(&swimctrl->iomem, obj, &swimctrl_mem_ops, swimctrl,
+ "swim", 0x2000);
+ sysbus_init_mmio(sbd, &swimctrl->iomem);
+}
+
+static void sysbus_swim_realize(DeviceState *dev, Error **errp)
+{
+ SWIM *sys = SWIM(dev);
+ SWIMCtrl *swimctrl = &sys->ctrl;
+
+ qbus_create_inplace(&swimctrl->bus, sizeof(SWIMBus), TYPE_SWIM_BUS, dev,
+ NULL);
+ swimctrl->bus.ctrl = swimctrl;
+}
+
+static const VMStateDescription vmstate_fdrive = {
+ .name = "fdrive",
+ .version_id = 1,
+ .minimum_version_id = 1,
+ .fields = (VMStateField[]) {
+ VMSTATE_END_OF_LIST()
+ },
+};
+
+static const VMStateDescription vmstate_swim = {
+ .name = "swim",
+ .version_id = 1,
+ .minimum_version_id = 1,
+ .fields = (VMStateField[]) {
+ VMSTATE_INT32(mode, SWIMCtrl),
+ /* IWM mode */
+ VMSTATE_INT32(iwm_switch, SWIMCtrl),
+ VMSTATE_UINT16_ARRAY(regs, SWIMCtrl, 8),
+ VMSTATE_UINT8(iwm_data, SWIMCtrl),
+ VMSTATE_UINT8(iwm_mode, SWIMCtrl),
+ /* SWIM mode */
+ VMSTATE_UINT8(swim_phase, SWIMCtrl),
+ VMSTATE_UINT8(swim_mode, SWIMCtrl),
+ /* Drives */
+ VMSTATE_STRUCT_ARRAY(drives, SWIMCtrl, SWIM_MAX_FD, 1,
+ vmstate_fdrive, FDrive),
+ VMSTATE_END_OF_LIST()
+ },
+};
+
+static const VMStateDescription vmstate_sysbus_swim = {
+ .name = "SWIM",
+ .version_id = 1,
+ .fields = (VMStateField[]) {
+ VMSTATE_STRUCT(ctrl, SWIM, 0, vmstate_swim, SWIMCtrl),
+ VMSTATE_END_OF_LIST()
+ }
+};
+
+static void sysbus_swim_class_init(ObjectClass *oc, void *data)
+{
+ DeviceClass *dc = DEVICE_CLASS(oc);
+
+ dc->realize = sysbus_swim_realize;
+ dc->reset = sysbus_swim_reset;
+ dc->vmsd = &vmstate_sysbus_swim;
+}
+
+static const TypeInfo sysbus_swim_info = {
+ .name = TYPE_SWIM,
+ .parent = TYPE_SYS_BUS_DEVICE,
+ .instance_size = sizeof(SWIM),
+ .instance_init = sysbus_swim_init,
+ .class_init = sysbus_swim_class_init,
+};
+
+static void swim_register_types(void)
+{
+ type_register_static(&sysbus_swim_info);
+ type_register_static(&swim_bus_info);
+ type_register_static(&swim_drive_info);
+}
+
+type_init(swim_register_types)
diff --git a/MAINTAINERS b/MAINTAINERS
index bd0df67e62..7f806eb1b2 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -923,9 +923,11 @@ S: Maintained
F: hw/misc/mac_via.c
F: hw/nubus/*
F: hw/display/macfb.c
+F: hw/block/swim.c
F: include/hw/misc/mac_via.h
F: include/hw/nubus/*
F: include/hw/display/macfb.h
+F: include/hw/block/swim.h
MicroBlaze Machines
-------------------
diff --git a/hw/block/Kconfig b/hw/block/Kconfig
index df96dc5dcc..2d17f481ad 100644
--- a/hw/block/Kconfig
+++ b/hw/block/Kconfig
@@ -37,3 +37,6 @@ config VHOST_USER_BLK
# Only PCI devices are provided for now
default y if VIRTIO_PCI
depends on VIRTIO && VHOST_USER && LINUX
+
+config SWIM
+ bool
diff --git a/hw/block/Makefile.objs b/hw/block/Makefile.objs
index f5f643f0cc..28c2495a00 100644
--- a/hw/block/Makefile.objs
+++ b/hw/block/Makefile.objs
@@ -8,6 +8,7 @@ common-obj-$(CONFIG_XEN) += xen-block.o
common-obj-$(CONFIG_ECC) += ecc.o
common-obj-$(CONFIG_ONENAND) += onenand.o
common-obj-$(CONFIG_NVME_PCI) += nvme.o
+common-obj-$(CONFIG_SWIM) += swim.o
obj-$(CONFIG_SH4) += tc58128.o
diff --git a/hw/m68k/Kconfig b/hw/m68k/Kconfig
index ef4917dee6..bab4885ca5 100644
--- a/hw/m68k/Kconfig
+++ b/hw/m68k/Kconfig
@@ -18,3 +18,4 @@ config Q800
select MAC_VIA
select NUBUS
select MACFB
+ select SWIM
--
2.21.0
^ permalink raw reply related [flat|nested] 27+ messages in thread
* [PULL 10/11] hw/m68k: define Macintosh Quadra 800
2019-10-28 18:16 [PULL 00/11] Q800 branch patches Laurent Vivier
` (8 preceding siblings ...)
2019-10-28 18:16 ` [PULL 09/11] hw/m68k: add a dummy SWIM floppy controller Laurent Vivier
@ 2019-10-28 18:16 ` Laurent Vivier
2019-10-28 18:16 ` [PULL 11/11] BootLinuxConsoleTest: Test the " Laurent Vivier
` (2 subsequent siblings)
12 siblings, 0 replies; 27+ messages in thread
From: Laurent Vivier @ 2019-10-28 18:16 UTC (permalink / raw)
To: qemu-devel
Cc: Fam Zheng, Kevin Wolf, qemu-block, Jason Wang, Mark Cave-Ayland,
Laurent Vivier, Max Reitz, Paolo Bonzini,
Philippe Mathieu-Daudé
If you want to test the machine, it doesn't yet boot a MacROM, but you can
boot a linux kernel from the command line.
You can install your own disk using debian-installer with:
./qemu-system-m68k \
-M q800 \
-serial none -serial mon:stdio \
-m 1000M -drive file=m68k.qcow2,format=qcow2 \
-net nic,model=dp83932,addr=09:00:07:12:34:57 \
-append "console=ttyS0 vga=off" \
-kernel vmlinux-4.15.0-2-m68k \
-initrd initrd.gz \
-drive file=debian-9.0-m68k-NETINST-1.iso \
-drive file=m68k.qcow2,format=qcow2 \
-nographic
If you use a graphic adapter instead of "-nographic", you can use "-g"
to set the size of the display (I use "-g 1600x800x24").
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Co-developed-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <20191026164546.30020-11-laurent@vivier.eu>
---
hw/m68k/bootinfo.h | 114 ++++++++++++
hw/m68k/q800.c | 401 ++++++++++++++++++++++++++++++++++++++++++
MAINTAINERS | 2 +
hw/m68k/Kconfig | 3 +
hw/m68k/Makefile.objs | 1 +
5 files changed, 521 insertions(+)
create mode 100644 hw/m68k/bootinfo.h
create mode 100644 hw/m68k/q800.c
diff --git a/hw/m68k/bootinfo.h b/hw/m68k/bootinfo.h
new file mode 100644
index 0000000000..5f8ded2686
--- /dev/null
+++ b/hw/m68k/bootinfo.h
@@ -0,0 +1,114 @@
+/*
+ * SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note
+ *
+ * Bootinfo tags from linux bootinfo.h and bootinfo-mac.h:
+ * This is an easily parsable and extendable structure containing all
+ * information to be passed from the bootstrap to the kernel
+ *
+ * This structure is copied right after the kernel by the bootstrap
+ * routine.
+ */
+
+#ifndef HW_M68K_BOOTINFO_H
+#define HW_M68K_BOOTINFO_H
+struct bi_record {
+ uint16_t tag; /* tag ID */
+ uint16_t size; /* size of record */
+ uint32_t data[0]; /* data */
+};
+
+/* machine independent tags */
+
+#define BI_LAST 0x0000 /* last record */
+#define BI_MACHTYPE 0x0001 /* machine type (u_long) */
+#define BI_CPUTYPE 0x0002 /* cpu type (u_long) */
+#define BI_FPUTYPE 0x0003 /* fpu type (u_long) */
+#define BI_MMUTYPE 0x0004 /* mmu type (u_long) */
+#define BI_MEMCHUNK 0x0005 /* memory chunk address and size */
+ /* (struct mem_info) */
+#define BI_RAMDISK 0x0006 /* ramdisk address and size */
+ /* (struct mem_info) */
+#define BI_COMMAND_LINE 0x0007 /* kernel command line parameters */
+ /* (string) */
+
+/* Macintosh-specific tags (all u_long) */
+
+#define BI_MAC_MODEL 0x8000 /* Mac Gestalt ID (model type) */
+#define BI_MAC_VADDR 0x8001 /* Mac video base address */
+#define BI_MAC_VDEPTH 0x8002 /* Mac video depth */
+#define BI_MAC_VROW 0x8003 /* Mac video rowbytes */
+#define BI_MAC_VDIM 0x8004 /* Mac video dimensions */
+#define BI_MAC_VLOGICAL 0x8005 /* Mac video logical base */
+#define BI_MAC_SCCBASE 0x8006 /* Mac SCC base address */
+#define BI_MAC_BTIME 0x8007 /* Mac boot time */
+#define BI_MAC_GMTBIAS 0x8008 /* Mac GMT timezone offset */
+#define BI_MAC_MEMSIZE 0x8009 /* Mac RAM size (sanity check) */
+#define BI_MAC_CPUID 0x800a /* Mac CPU type (sanity check) */
+#define BI_MAC_ROMBASE 0x800b /* Mac system ROM base address */
+
+/* Macintosh hardware profile data */
+
+#define BI_MAC_VIA1BASE 0x8010 /* Mac VIA1 base address (always present) */
+#define BI_MAC_VIA2BASE 0x8011 /* Mac VIA2 base address (type varies) */
+#define BI_MAC_VIA2TYPE 0x8012 /* Mac VIA2 type (VIA, RBV, OSS) */
+#define BI_MAC_ADBTYPE 0x8013 /* Mac ADB interface type */
+#define BI_MAC_ASCBASE 0x8014 /* Mac Apple Sound Chip base address */
+#define BI_MAC_SCSI5380 0x8015 /* Mac NCR 5380 SCSI (base address, multi) */
+#define BI_MAC_SCSIDMA 0x8016 /* Mac SCSI DMA (base address) */
+#define BI_MAC_SCSI5396 0x8017 /* Mac NCR 53C96 SCSI (base address, multi) */
+#define BI_MAC_IDETYPE 0x8018 /* Mac IDE interface type */
+#define BI_MAC_IDEBASE 0x8019 /* Mac IDE interface base address */
+#define BI_MAC_NUBUS 0x801a /* Mac Nubus type (none, regular, pseudo) */
+#define BI_MAC_SLOTMASK 0x801b /* Mac Nubus slots present */
+#define BI_MAC_SCCTYPE 0x801c /* Mac SCC serial type (normal, IOP) */
+#define BI_MAC_ETHTYPE 0x801d /* Mac builtin ethernet type (Sonic, MACE */
+#define BI_MAC_ETHBASE 0x801e /* Mac builtin ethernet base address */
+#define BI_MAC_PMU 0x801f /* Mac power management / poweroff hardware */
+#define BI_MAC_IOP_SWIM 0x8020 /* Mac SWIM floppy IOP */
+#define BI_MAC_IOP_ADB 0x8021 /* Mac ADB IOP */
+
+#define BOOTINFO0(as, base, id) \
+ do { \
+ stw_phys(as, base, id); \
+ base += 2; \
+ stw_phys(as, base, sizeof(struct bi_record)); \
+ base += 2; \
+ } while (0)
+
+#define BOOTINFO1(as, base, id, value) \
+ do { \
+ stw_phys(as, base, id); \
+ base += 2; \
+ stw_phys(as, base, sizeof(struct bi_record) + 4); \
+ base += 2; \
+ stl_phys(as, base, value); \
+ base += 4; \
+ } while (0)
+
+#define BOOTINFO2(as, base, id, value1, value2) \
+ do { \
+ stw_phys(as, base, id); \
+ base += 2; \
+ stw_phys(as, base, sizeof(struct bi_record) + 8); \
+ base += 2; \
+ stl_phys(as, base, value1); \
+ base += 4; \
+ stl_phys(as, base, value2); \
+ base += 4; \
+ } while (0)
+
+#define BOOTINFOSTR(as, base, id, string) \
+ do { \
+ int i; \
+ stw_phys(as, base, id); \
+ base += 2; \
+ stw_phys(as, base, \
+ (sizeof(struct bi_record) + strlen(string) + 2) & ~1); \
+ base += 2; \
+ for (i = 0; string[i]; i++) { \
+ stb_phys(as, base++, string[i]); \
+ } \
+ stb_phys(as, base++, 0); \
+ base = (parameters_base + 1) & ~1; \
+ } while (0)
+#endif
diff --git a/hw/m68k/q800.c b/hw/m68k/q800.c
new file mode 100644
index 0000000000..2b4842f8c6
--- /dev/null
+++ b/hw/m68k/q800.c
@@ -0,0 +1,401 @@
+/*
+ * QEMU Motorla 680x0 Macintosh hardware System Emulator
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a copy
+ * of this software and associated documentation files (the "Software"), to deal
+ * in the Software without restriction, including without limitation the rights
+ * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+ * copies of the Software, and to permit persons to whom the Software is
+ * furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
+ * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+ * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
+ * THE SOFTWARE.
+ */
+
+#include "qemu/osdep.h"
+#include "qemu/units.h"
+#include "qemu-common.h"
+#include "sysemu/sysemu.h"
+#include "cpu.h"
+#include "hw/hw.h"
+#include "hw/boards.h"
+#include "hw/irq.h"
+#include "elf.h"
+#include "hw/loader.h"
+#include "ui/console.h"
+#include "exec/address-spaces.h"
+#include "hw/char/escc.h"
+#include "hw/sysbus.h"
+#include "hw/scsi/esp.h"
+#include "bootinfo.h"
+#include "hw/misc/mac_via.h"
+#include "hw/input/adb.h"
+#include "hw/nubus/mac-nubus-bridge.h"
+#include "hw/display/macfb.h"
+#include "hw/block/swim.h"
+#include "net/net.h"
+#include "qapi/error.h"
+#include "sysemu/qtest.h"
+#include "sysemu/runstate.h"
+#include "sysemu/reset.h"
+
+#define MACROM_ADDR 0x40000000
+#define MACROM_SIZE 0x00100000
+
+#define MACROM_FILENAME "MacROM.bin"
+
+#define Q800_MACHINE_ID 35
+#define Q800_CPU_ID (1 << 2)
+#define Q800_FPU_ID (1 << 2)
+#define Q800_MMU_ID (1 << 2)
+
+#define MACH_MAC 3
+#define Q800_MAC_CPU_ID 2
+
+#define VIA_BASE 0x50f00000
+#define SONIC_PROM_BASE 0x50f08000
+#define SONIC_BASE 0x50f0a000
+#define SCC_BASE 0x50f0c020
+#define ESP_BASE 0x50f10000
+#define ESP_PDMA 0x50f10100
+#define ASC_BASE 0x50F14000
+#define SWIM_BASE 0x50F1E000
+#define NUBUS_SUPER_SLOT_BASE 0x60000000
+#define NUBUS_SLOT_BASE 0xf0000000
+
+/*
+ * the video base, whereas it a Nubus address,
+ * is needed by the kernel to have early display and
+ * thus provided by the bootloader
+ */
+#define VIDEO_BASE 0xf9001000
+
+#define MAC_CLOCK 3686418
+
+/*
+ * The GLUE (General Logic Unit) is an Apple custom integrated circuit chip
+ * that performs a variety of functions (RAM management, clock generation, ...).
+ * The GLUE chip receives interrupt requests from various devices,
+ * assign priority to each, and asserts one or more interrupt line to the
+ * CPU.
+ */
+
+typedef struct {
+ M68kCPU *cpu;
+ uint8_t ipr;
+} GLUEState;
+
+static void GLUE_set_irq(void *opaque, int irq, int level)
+{
+ GLUEState *s = opaque;
+ int i;
+
+ if (level) {
+ s->ipr |= 1 << irq;
+ } else {
+ s->ipr &= ~(1 << irq);
+ }
+
+ for (i = 7; i >= 0; i--) {
+ if ((s->ipr >> i) & 1) {
+ m68k_set_irq_level(s->cpu, i + 1, i + 25);
+ return;
+ }
+ }
+ m68k_set_irq_level(s->cpu, 0, 0);
+}
+
+static void main_cpu_reset(void *opaque)
+{
+ M68kCPU *cpu = opaque;
+ CPUState *cs = CPU(cpu);
+
+ cpu_reset(cs);
+ cpu->env.aregs[7] = ldl_phys(cs->as, 0);
+ cpu->env.pc = ldl_phys(cs->as, 4);
+}
+
+static void q800_init(MachineState *machine)
+{
+ M68kCPU *cpu = NULL;
+ int linux_boot;
+ int32_t kernel_size;
+ uint64_t elf_entry;
+ char *filename;
+ int bios_size;
+ ram_addr_t initrd_base;
+ int32_t initrd_size;
+ MemoryRegion *rom;
+ MemoryRegion *ram;
+ ram_addr_t ram_size = machine->ram_size;
+ const char *kernel_filename = machine->kernel_filename;
+ const char *initrd_filename = machine->initrd_filename;
+ const char *kernel_cmdline = machine->kernel_cmdline;
+ hwaddr parameters_base;
+ CPUState *cs;
+ DeviceState *dev;
+ DeviceState *via_dev;
+ SysBusESPState *sysbus_esp;
+ ESPState *esp;
+ SysBusDevice *sysbus;
+ BusState *adb_bus;
+ NubusBus *nubus;
+ GLUEState *irq;
+ qemu_irq *pic;
+
+ linux_boot = (kernel_filename != NULL);
+
+ if (ram_size > 1 * GiB) {
+ error_report("Too much memory for this machine: %" PRId64 " MiB, "
+ "maximum 1024 MiB", ram_size / MiB);
+ exit(1);
+ }
+
+ /* init CPUs */
+ cpu = M68K_CPU(cpu_create(machine->cpu_type));
+ qemu_register_reset(main_cpu_reset, cpu);
+
+ ram = g_malloc(sizeof(*ram));
+ memory_region_init_ram(ram, NULL, "m68k_mac.ram", ram_size, &error_abort);
+ memory_region_add_subregion(get_system_memory(), 0, ram);
+
+ /* IRQ Glue */
+
+ irq = g_new0(GLUEState, 1);
+ irq->cpu = cpu;
+ pic = qemu_allocate_irqs(GLUE_set_irq, irq, 8);
+
+ /* VIA */
+
+ via_dev = qdev_create(NULL, TYPE_MAC_VIA);
+ qdev_init_nofail(via_dev);
+ sysbus = SYS_BUS_DEVICE(via_dev);
+ sysbus_mmio_map(sysbus, 0, VIA_BASE);
+ qdev_connect_gpio_out_named(DEVICE(sysbus), "irq", 0, pic[0]);
+ qdev_connect_gpio_out_named(DEVICE(sysbus), "irq", 1, pic[1]);
+
+
+ adb_bus = qdev_get_child_bus(via_dev, "adb.0");
+ dev = qdev_create(adb_bus, TYPE_ADB_KEYBOARD);
+ qdev_init_nofail(dev);
+ dev = qdev_create(adb_bus, TYPE_ADB_MOUSE);
+ qdev_init_nofail(dev);
+
+ /* MACSONIC */
+
+ if (nb_nics > 1) {
+ error_report("q800 can only have one ethernet interface");
+ exit(1);
+ }
+
+ qemu_check_nic_model(&nd_table[0], "dp83932");
+
+ /*
+ * MacSonic driver needs an Apple MAC address
+ * Valid prefix are:
+ * 00:05:02 Apple
+ * 00:80:19 Dayna Communications, Inc.
+ * 00:A0:40 Apple
+ * 08:00:07 Apple
+ * (Q800 use the last one)
+ */
+ nd_table[0].macaddr.a[0] = 0x08;
+ nd_table[0].macaddr.a[1] = 0x00;
+ nd_table[0].macaddr.a[2] = 0x07;
+
+ dev = qdev_create(NULL, "dp8393x");
+ qdev_set_nic_properties(dev, &nd_table[0]);
+ qdev_prop_set_uint8(dev, "it_shift", 2);
+ qdev_prop_set_bit(dev, "big_endian", true);
+ qdev_prop_set_ptr(dev, "dma_mr", get_system_memory());
+ qdev_init_nofail(dev);
+ sysbus = SYS_BUS_DEVICE(dev);
+ sysbus_mmio_map(sysbus, 0, SONIC_BASE);
+ sysbus_mmio_map(sysbus, 1, SONIC_PROM_BASE);
+ sysbus_connect_irq(sysbus, 0, pic[2]);
+
+ /* SCC */
+
+ dev = qdev_create(NULL, TYPE_ESCC);
+ qdev_prop_set_uint32(dev, "disabled", 0);
+ qdev_prop_set_uint32(dev, "frequency", MAC_CLOCK);
+ qdev_prop_set_uint32(dev, "it_shift", 1);
+ qdev_prop_set_bit(dev, "bit_swap", true);
+ qdev_prop_set_chr(dev, "chrA", serial_hd(0));
+ qdev_prop_set_chr(dev, "chrB", serial_hd(1));
+ qdev_prop_set_uint32(dev, "chnBtype", 0);
+ qdev_prop_set_uint32(dev, "chnAtype", 0);
+ qdev_init_nofail(dev);
+ sysbus = SYS_BUS_DEVICE(dev);
+ sysbus_connect_irq(sysbus, 0, pic[3]);
+ sysbus_connect_irq(sysbus, 1, pic[3]);
+ sysbus_mmio_map(sysbus, 0, SCC_BASE);
+
+ /* SCSI */
+
+ dev = qdev_create(NULL, TYPE_ESP);
+ sysbus_esp = ESP_STATE(dev);
+ esp = &sysbus_esp->esp;
+ esp->dma_memory_read = NULL;
+ esp->dma_memory_write = NULL;
+ esp->dma_opaque = NULL;
+ sysbus_esp->it_shift = 4;
+ esp->dma_enabled = 1;
+ qdev_init_nofail(dev);
+
+ sysbus = SYS_BUS_DEVICE(dev);
+ sysbus_connect_irq(sysbus, 0, qdev_get_gpio_in_named(via_dev,
+ "via2-irq",
+ VIA2_IRQ_SCSI_BIT));
+ sysbus_connect_irq(sysbus, 1,
+ qdev_get_gpio_in_named(via_dev, "via2-irq",
+ VIA2_IRQ_SCSI_DATA_BIT));
+ sysbus_mmio_map(sysbus, 0, ESP_BASE);
+ sysbus_mmio_map(sysbus, 1, ESP_PDMA);
+
+ scsi_bus_legacy_handle_cmdline(&esp->bus);
+
+ /* SWIM floppy controller */
+
+ dev = qdev_create(NULL, TYPE_SWIM);
+ qdev_init_nofail(dev);
+ sysbus_mmio_map(SYS_BUS_DEVICE(dev), 0, SWIM_BASE);
+
+ /* NuBus */
+
+ dev = qdev_create(NULL, TYPE_MAC_NUBUS_BRIDGE);
+ qdev_init_nofail(dev);
+ sysbus_mmio_map(SYS_BUS_DEVICE(dev), 0, NUBUS_SUPER_SLOT_BASE);
+ sysbus_mmio_map(SYS_BUS_DEVICE(dev), 1, NUBUS_SLOT_BASE);
+
+ nubus = MAC_NUBUS_BRIDGE(dev)->bus;
+
+ /* framebuffer in nubus slot #9 */
+
+ dev = qdev_create(BUS(nubus), TYPE_NUBUS_MACFB);
+ qdev_prop_set_uint32(dev, "width", graphic_width);
+ qdev_prop_set_uint32(dev, "height", graphic_height);
+ qdev_prop_set_uint8(dev, "depth", graphic_depth);
+ qdev_init_nofail(dev);
+
+ cs = CPU(cpu);
+ if (linux_boot) {
+ uint64_t high;
+ kernel_size = load_elf(kernel_filename, NULL, NULL, NULL,
+ &elf_entry, NULL, &high, 1,
+ EM_68K, 0, 0);
+ if (kernel_size < 0) {
+ error_report("could not load kernel '%s'", kernel_filename);
+ exit(1);
+ }
+ stl_phys(cs->as, 4, elf_entry); /* reset initial PC */
+ parameters_base = (high + 1) & ~1;
+
+ BOOTINFO1(cs->as, parameters_base, BI_MACHTYPE, MACH_MAC);
+ BOOTINFO1(cs->as, parameters_base, BI_FPUTYPE, Q800_FPU_ID);
+ BOOTINFO1(cs->as, parameters_base, BI_MMUTYPE, Q800_MMU_ID);
+ BOOTINFO1(cs->as, parameters_base, BI_CPUTYPE, Q800_CPU_ID);
+ BOOTINFO1(cs->as, parameters_base, BI_MAC_CPUID, Q800_MAC_CPU_ID);
+ BOOTINFO1(cs->as, parameters_base, BI_MAC_MODEL, Q800_MACHINE_ID);
+ BOOTINFO1(cs->as, parameters_base,
+ BI_MAC_MEMSIZE, ram_size >> 20); /* in MB */
+ BOOTINFO2(cs->as, parameters_base, BI_MEMCHUNK, 0, ram_size);
+ BOOTINFO1(cs->as, parameters_base, BI_MAC_VADDR, VIDEO_BASE);
+ BOOTINFO1(cs->as, parameters_base, BI_MAC_VDEPTH, graphic_depth);
+ BOOTINFO1(cs->as, parameters_base, BI_MAC_VDIM,
+ (graphic_height << 16) | graphic_width);
+ BOOTINFO1(cs->as, parameters_base, BI_MAC_VROW,
+ (graphic_width * graphic_depth + 7) / 8);
+ BOOTINFO1(cs->as, parameters_base, BI_MAC_SCCBASE, SCC_BASE);
+
+ if (kernel_cmdline) {
+ BOOTINFOSTR(cs->as, parameters_base, BI_COMMAND_LINE,
+ kernel_cmdline);
+ }
+
+ /* load initrd */
+ if (initrd_filename) {
+ initrd_size = get_image_size(initrd_filename);
+ if (initrd_size < 0) {
+ error_report("could not load initial ram disk '%s'",
+ initrd_filename);
+ exit(1);
+ }
+
+ initrd_base = (ram_size - initrd_size) & TARGET_PAGE_MASK;
+ load_image_targphys(initrd_filename, initrd_base,
+ ram_size - initrd_base);
+ BOOTINFO2(cs->as, parameters_base, BI_RAMDISK, initrd_base,
+ initrd_size);
+ } else {
+ initrd_base = 0;
+ initrd_size = 0;
+ }
+ BOOTINFO0(cs->as, parameters_base, BI_LAST);
+ } else {
+ uint8_t *ptr;
+ /* allocate and load BIOS */
+ rom = g_malloc(sizeof(*rom));
+ memory_region_init_ram(rom, NULL, "m68k_mac.rom", MACROM_SIZE,
+ &error_abort);
+ if (bios_name == NULL) {
+ bios_name = MACROM_FILENAME;
+ }
+ filename = qemu_find_file(QEMU_FILE_TYPE_BIOS, bios_name);
+ memory_region_set_readonly(rom, true);
+ memory_region_add_subregion(get_system_memory(), MACROM_ADDR, rom);
+
+ /* Load MacROM binary */
+ if (filename) {
+ bios_size = load_image_targphys(filename, MACROM_ADDR, MACROM_SIZE);
+ g_free(filename);
+ } else {
+ bios_size = -1;
+ }
+
+ /* Remove qtest_enabled() check once firmware files are in the tree */
+ if (!qtest_enabled()) {
+ if (bios_size < 0 || bios_size > MACROM_SIZE) {
+ error_report("could not load MacROM '%s'", bios_name);
+ exit(1);
+ }
+
+ ptr = rom_ptr(MACROM_ADDR, MACROM_SIZE);
+ stl_phys(cs->as, 0, ldl_p(ptr)); /* reset initial SP */
+ stl_phys(cs->as, 4,
+ MACROM_ADDR + ldl_p(ptr + 4)); /* reset initial PC */
+ }
+ }
+}
+
+static void q800_machine_class_init(ObjectClass *oc, void *data)
+{
+ MachineClass *mc = MACHINE_CLASS(oc);
+ mc->desc = "Macintosh Quadra 800";
+ mc->init = q800_init;
+ mc->default_cpu_type = M68K_CPU_TYPE_NAME("m68040");
+ mc->max_cpus = 1;
+ mc->is_default = 0;
+ mc->block_default_type = IF_SCSI;
+}
+
+static const TypeInfo q800_machine_typeinfo = {
+ .name = MACHINE_TYPE_NAME("q800"),
+ .parent = TYPE_MACHINE,
+ .class_init = q800_machine_class_init,
+};
+
+static void q800_machine_register_types(void)
+{
+ type_register_static(&q800_machine_typeinfo);
+}
+
+type_init(q800_machine_register_types)
diff --git a/MAINTAINERS b/MAINTAINERS
index 7f806eb1b2..afe9dc5b57 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -920,10 +920,12 @@ F: include/hw/m68k/next-cube.h
q800
M: Laurent Vivier <laurent@vivier.eu>
S: Maintained
+F: hw/m68k/q800.c
F: hw/misc/mac_via.c
F: hw/nubus/*
F: hw/display/macfb.c
F: hw/block/swim.c
+F: hw/m68k/bootinfo.h
F: include/hw/misc/mac_via.h
F: include/hw/nubus/*
F: include/hw/display/macfb.h
diff --git a/hw/m68k/Kconfig b/hw/m68k/Kconfig
index bab4885ca5..c757e7dfa4 100644
--- a/hw/m68k/Kconfig
+++ b/hw/m68k/Kconfig
@@ -19,3 +19,6 @@ config Q800
select NUBUS
select MACFB
select SWIM
+ select ESCC
+ select ESP
+ select DP8393X
diff --git a/hw/m68k/Makefile.objs b/hw/m68k/Makefile.objs
index f25854730d..b2c9e5ab12 100644
--- a/hw/m68k/Makefile.objs
+++ b/hw/m68k/Makefile.objs
@@ -1,3 +1,4 @@
obj-$(CONFIG_AN5206) += an5206.o mcf5206.o
obj-$(CONFIG_MCF5208) += mcf5208.o mcf_intc.o
obj-$(CONFIG_NEXTCUBE) += next-kbd.o next-cube.o
+obj-$(CONFIG_Q800) += q800.o
--
2.21.0
^ permalink raw reply related [flat|nested] 27+ messages in thread
* [PULL 11/11] BootLinuxConsoleTest: Test the Quadra 800
2019-10-28 18:16 [PULL 00/11] Q800 branch patches Laurent Vivier
` (9 preceding siblings ...)
2019-10-28 18:16 ` [PULL 10/11] hw/m68k: define Macintosh Quadra 800 Laurent Vivier
@ 2019-10-28 18:16 ` Laurent Vivier
2019-10-29 23:23 ` [PATCH 0/2] Acceptance test: update kernel used on m68k/q800 test Cleber Rosa
2019-10-28 23:55 ` [PULL 00/11] Q800 branch patches no-reply
2019-10-29 18:06 ` Peter Maydell
12 siblings, 1 reply; 27+ messages in thread
From: Laurent Vivier @ 2019-10-28 18:16 UTC (permalink / raw)
To: qemu-devel
Cc: Fam Zheng, Kevin Wolf, qemu-block, Jason Wang, Laurent Vivier,
Max Reitz, Cleber Rosa, Paolo Bonzini,
Philippe Mathieu-Daudé
From: Philippe Mathieu-Daudé <f4bug@amsat.org>
This test boots a Linux kernel on a Quadra 800 board
and verify the serial is working.
Example:
$ avocado --show=app,console run -t machine:q800 tests/acceptance/boot_linux_console.py
console: ABCFGHIJK
console: Linux version 5.2.0-2-m68k (debian-kernel@lists.debian.org) (gcc version 8.3.0 (Debian 8.3.0-21)) #1 Debian 5.2.9-2 (2019-08-21)
console: Detected Macintosh model: 35
console: Apple Macintosh Quadra 800
console: Built 1 zonelists, mobility grouping on. Total pages: 32448
console: Kernel command line: printk.time=0 console=ttyS0 vga=off
[...]
console: Calibrating delay loop... 1236.99 BogoMIPS (lpj=6184960)
[...]
console: NuBus: Scanning NuBus slots.
console: Slot 9: Board resource not found!
console: SCSI subsystem initialized
console: clocksource: Switched to clocksource via1
[...]
console: macfb: framebuffer at 0xf9001000, mapped to 0x(ptrval), size 468k
console: macfb: mode is 800x600x8, linelength=800
console: Console: switching to colour frame buffer device 100x37
console: fb0: DAFB frame buffer device
console: pmac_zilog: 0.6 (Benjamin Herrenschmidt <benh@kernel.crashing.org>)
console: scc.0: ttyS0 at MMIO 0x50f0c022 (irq = 4, base_baud = 230400) is a Z85c30 ESCC - Serial port
console: scc.1: ttyS1 at MMIO 0x50f0c020 (irq = 4, base_baud = 230400) is a Z85c30 ESCC - Serial port
console: Non-volatile memory driver v1.3
console: adb: Mac II ADB Driver v1.0 for Unified ADB
console: mousedev: PS/2 mouse device common for all mice
console: random: fast init done
console: Detected ADB keyboard, type <unknown>.
console: input: ADB keyboard as /devices/virtual/input/input0
console: input: ADB mouse as /devices/virtual/input/input1
console: rtc-generic rtc-generic: registered as rtc0
console: ledtrig-cpu: registered to indicate activity on CPUs
[...]
console: rtc-generic rtc-generic: setting system clock to 2019-09-10T16:20:25 UTC (1568132425)
console: List of all partitions:
console: No filesystem could mount root, tried:
JOB TIME : 2.91 s
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Tested-by: Cleber Rosa <crosa@redhat.com>
Reviewed-by: Cleber Rosa <crosa@redhat.com>
Message-Id: <20190910163430.11326-1-f4bug@amsat.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <20191026164546.30020-12-laurent@vivier.eu>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
---
tests/acceptance/boot_linux_console.py | 24 ++++++++++++++++++++++++
1 file changed, 24 insertions(+)
diff --git a/tests/acceptance/boot_linux_console.py b/tests/acceptance/boot_linux_console.py
index 8a9a314ab4..df27813c78 100644
--- a/tests/acceptance/boot_linux_console.py
+++ b/tests/acceptance/boot_linux_console.py
@@ -378,3 +378,27 @@ class BootLinuxConsole(Test):
self.vm.launch()
console_pattern = 'Kernel command line: %s' % kernel_command_line
self.wait_for_console_pattern(console_pattern)
+
+ def test_m68k_q800(self):
+ """
+ :avocado: tags=arch:m68k
+ :avocado: tags=machine:q800
+ """
+ deb_url = ('http://ftp.ports.debian.org/debian-ports/pool-m68k/main'
+ '/l/linux/kernel-image-5.2.0-2-m68k-di_5.2.9-2_m68k.udeb')
+ deb_hash = '0797e05129595f22f3c0142db5e199769a723bf9'
+ deb_path = self.fetch_asset(deb_url, asset_hash=deb_hash)
+ kernel_path = self.extract_from_deb(deb_path,
+ '/boot/vmlinux-5.2.0-2-m68k')
+
+ self.vm.set_machine('q800')
+ self.vm.set_console()
+ kernel_command_line = (self.KERNEL_COMMON_COMMAND_LINE +
+ 'console=ttyS0 vga=off')
+ self.vm.add_args('-kernel', kernel_path,
+ '-append', kernel_command_line)
+ self.vm.launch()
+ console_pattern = 'Kernel command line: %s' % kernel_command_line
+ self.wait_for_console_pattern(console_pattern)
+ console_pattern = 'No filesystem could mount root'
+ self.wait_for_console_pattern(console_pattern)
--
2.21.0
^ permalink raw reply related [flat|nested] 27+ messages in thread
* Re: [PULL 00/11] Q800 branch patches
2019-10-28 18:16 [PULL 00/11] Q800 branch patches Laurent Vivier
` (10 preceding siblings ...)
2019-10-28 18:16 ` [PULL 11/11] BootLinuxConsoleTest: Test the " Laurent Vivier
@ 2019-10-28 23:55 ` no-reply
2019-10-29 18:06 ` Peter Maydell
12 siblings, 0 replies; 27+ messages in thread
From: no-reply @ 2019-10-28 23:55 UTC (permalink / raw)
To: laurent
Cc: fam, kwolf, qemu-block, jasowang, qemu-devel, laurent, pbonzini, mreitz
Patchew URL: https://patchew.org/QEMU/20191028181643.5143-1-laurent@vivier.eu/
Hi,
This series seems to have some coding style problems. See output below for
more information:
Subject: [PULL 00/11] Q800 branch patches
Type: series
Message-id: 20191028181643.5143-1-laurent@vivier.eu
=== TEST SCRIPT BEGIN ===
#!/bin/bash
git rev-parse base > /dev/null || exit 0
git config --local diff.renamelimit 0
git config --local diff.renames True
git config --local diff.algorithm histogram
./scripts/checkpatch.pl --mailback base..
=== TEST SCRIPT END ===
Switched to a new branch 'test'
0aafe33 BootLinuxConsoleTest: Test the Quadra 800
6578d05 hw/m68k: define Macintosh Quadra 800
8d92411 hw/m68k: add a dummy SWIM floppy controller
33e127e hw/m68k: add Nubus macfb video card
9e5413f hw/m68k: add Nubus support
777b85a hw/m68k: implement ADB bus support for via
d23cb98 hw/m68k: add VIA support
477391a dp8393x: manage big endian bus
a5915a5 esp: add pseudo-DMA as used by Macintosh
324dd11 esp: move get_cmd() post-DMA code to get_cmd_cb()
447e0b9 esp: move handle_ti_cmd() cleanup code to esp_do_dma().
=== OUTPUT BEGIN ===
1/11 Checking commit 447e0b9e7e82 (esp: move handle_ti_cmd() cleanup code to esp_do_dma().)
2/11 Checking commit 324dd11bd843 (esp: move get_cmd() post-DMA code to get_cmd_cb())
3/11 Checking commit a5915a587841 (esp: add pseudo-DMA as used by Macintosh)
4/11 Checking commit 477391a3299a (dp8393x: manage big endian bus)
5/11 Checking commit d23cb98ca175 (hw/m68k: add VIA support)
WARNING: added, moved or deleted file(s), does MAINTAINERS need updating?
#84:
new file mode 100644
ERROR: space prohibited after that '&&' (ctx:WxW)
#456: FILE: hw/misc/mac_via.c:368:
+ if (!(v1s->last_b & VIA1B_vRTCClk) && (s->b & VIA1B_vRTCClk)) {
^
total: 1 errors, 1 warnings, 912 lines checked
Patch 5/11 has style problems, please review. If any of these errors
are false positives report them to the maintainer, see
CHECKPATCH in MAINTAINERS.
6/11 Checking commit 777b85a4403d (hw/m68k: implement ADB bus support for via)
7/11 Checking commit 9e5413fe652c (hw/m68k: add Nubus support)
WARNING: added, moved or deleted file(s), does MAINTAINERS need updating?
#65:
new file mode 100644
total: 0 errors, 1 warnings, 531 lines checked
Patch 7/11 has style problems, please review. If any of these errors
are false positives report them to the maintainer, see
CHECKPATCH in MAINTAINERS.
8/11 Checking commit 33e127ea8c90 (hw/m68k: add Nubus macfb video card)
WARNING: added, moved or deleted file(s), does MAINTAINERS need updating?
#76:
new file mode 100644
total: 0 errors, 1 warnings, 597 lines checked
Patch 8/11 has style problems, please review. If any of these errors
are false positives report them to the maintainer, see
CHECKPATCH in MAINTAINERS.
9/11 Checking commit 8d9241120f8f (hw/m68k: add a dummy SWIM floppy controller)
WARNING: added, moved or deleted file(s), does MAINTAINERS need updating?
#63:
new file mode 100644
total: 0 errors, 1 warnings, 593 lines checked
Patch 9/11 has style problems, please review. If any of these errors
are false positives report them to the maintainer, see
CHECKPATCH in MAINTAINERS.
10/11 Checking commit 6578d05b2deb (hw/m68k: define Macintosh Quadra 800)
WARNING: added, moved or deleted file(s), does MAINTAINERS need updating?
#72:
new file mode 100644
total: 0 errors, 1 warnings, 537 lines checked
Patch 10/11 has style problems, please review. If any of these errors
are false positives report them to the maintainer, see
CHECKPATCH in MAINTAINERS.
11/11 Checking commit 0aafe3328f0b (BootLinuxConsoleTest: Test the Quadra 800)
=== OUTPUT END ===
Test command exited with code: 1
The full log is available at
http://patchew.org/logs/20191028181643.5143-1-laurent@vivier.eu/testing.checkpatch/?type=message.
---
Email generated automatically by Patchew [https://patchew.org/].
Please send your feedback to patchew-devel@redhat.com
^ permalink raw reply [flat|nested] 27+ messages in thread
* Re: [PULL 00/11] Q800 branch patches
2019-10-28 18:16 [PULL 00/11] Q800 branch patches Laurent Vivier
` (11 preceding siblings ...)
2019-10-28 23:55 ` [PULL 00/11] Q800 branch patches no-reply
@ 2019-10-29 18:06 ` Peter Maydell
12 siblings, 0 replies; 27+ messages in thread
From: Peter Maydell @ 2019-10-29 18:06 UTC (permalink / raw)
To: Laurent Vivier
Cc: Fam Zheng, Kevin Wolf, Qemu-block, Jason Wang, QEMU Developers,
Max Reitz, Paolo Bonzini
On Mon, 28 Oct 2019 at 18:48, Laurent Vivier <laurent@vivier.eu> wrote:
>
> The following changes since commit 7bc8f9734213b76e76631a483be13d6737c2adbc:
>
> Merge remote-tracking branch 'remotes/pmaydell/tags/pull-target-arm-20191025' into staging (2019-10-25 13:12:16 +0100)
>
> are available in the Git repository at:
>
> git://github.com/vivier/qemu-m68k.git tags/q800-branch-pull-request
>
> for you to fetch changes up to f7d85525f14b99aaa7bf561c9f3cf11c85a080c9:
>
> BootLinuxConsoleTest: Test the Quadra 800 (2019-10-28 19:07:22 +0100)
>
> ----------------------------------------------------------------
> Add Macintosh Quadra 800 machine in hw/m68k
>
> ----------------------------------------------------------------
Applied, thanks.
Please update the changelog at https://wiki.qemu.org/ChangeLog/4.2
for any user-visible changes.
-- PMM
^ permalink raw reply [flat|nested] 27+ messages in thread
* [PATCH 0/2] Acceptance test: update kernel used on m68k/q800 test
2019-10-28 18:16 ` [PULL 11/11] BootLinuxConsoleTest: Test the " Laurent Vivier
@ 2019-10-29 23:23 ` Cleber Rosa
2019-10-29 23:23 ` [PATCH 1/2] Acceptance test: cancel test if m68k kernel packages goes missing Cleber Rosa
` (3 more replies)
0 siblings, 4 replies; 27+ messages in thread
From: Cleber Rosa @ 2019-10-29 23:23 UTC (permalink / raw)
To: qemu-devel
Cc: Peter Maydell, Eduardo Habkost, Philippe Mathieu-Daudé,
Wainer dos Santos Moschetta, Laurent Vivier, Willian Rampazzo,
Cleber Rosa, Philippe Mathieu-Daudé
The boot_linux_console.py:BootLinuxConsole.test_m68k_q800 was very
recently merged, but between its last review and now, the Kernel
package used went missing.
This updates the Kernel package, and protects the test from failing
if it gets updated again.
Cleber Rosa (2):
Acceptance test: cancel test if m68k kernel packages goes missing
Acceptance test: update kernel for m68k/q800 test
tests/acceptance/boot_linux_console.py | 11 +++++++----
1 file changed, 7 insertions(+), 4 deletions(-)
--
2.21.0
^ permalink raw reply [flat|nested] 27+ messages in thread
* [PATCH 1/2] Acceptance test: cancel test if m68k kernel packages goes missing
2019-10-29 23:23 ` [PATCH 0/2] Acceptance test: update kernel used on m68k/q800 test Cleber Rosa
@ 2019-10-29 23:23 ` Cleber Rosa
2019-10-31 8:06 ` Alex Bennée
2019-10-29 23:23 ` [PATCH 2/2] Acceptance test: update kernel for m68k/q800 test Cleber Rosa
` (2 subsequent siblings)
3 siblings, 1 reply; 27+ messages in thread
From: Cleber Rosa @ 2019-10-29 23:23 UTC (permalink / raw)
To: qemu-devel
Cc: Peter Maydell, Eduardo Habkost, Philippe Mathieu-Daudé,
Wainer dos Santos Moschetta, Laurent Vivier, Willian Rampazzo,
Cleber Rosa, Philippe Mathieu-Daudé
The Linux kernel that is extracted from a Debian package for the q800
machine test is hosted on a "pool" location. AFAICT, it gets updated
without too much ceremony, and I don't see any archival location that
is stable enough.
For now, to avoid test errors, let's cancel the test if fetching the
package fails.
Signed-off-by: Cleber Rosa <crosa@redhat.com>
---
tests/acceptance/boot_linux_console.py | 5 ++++-
1 file changed, 4 insertions(+), 1 deletion(-)
diff --git a/tests/acceptance/boot_linux_console.py b/tests/acceptance/boot_linux_console.py
index df27813c78..c439fd90fc 100644
--- a/tests/acceptance/boot_linux_console.py
+++ b/tests/acceptance/boot_linux_console.py
@@ -387,7 +387,10 @@ class BootLinuxConsole(Test):
deb_url = ('http://ftp.ports.debian.org/debian-ports/pool-m68k/main'
'/l/linux/kernel-image-5.2.0-2-m68k-di_5.2.9-2_m68k.udeb')
deb_hash = '0797e05129595f22f3c0142db5e199769a723bf9'
- deb_path = self.fetch_asset(deb_url, asset_hash=deb_hash)
+ try:
+ deb_path = self.fetch_asset(deb_url, asset_hash=deb_hash)
+ except OSError as exp:
+ self.cancel(exp)
kernel_path = self.extract_from_deb(deb_path,
'/boot/vmlinux-5.2.0-2-m68k')
--
2.21.0
^ permalink raw reply related [flat|nested] 27+ messages in thread
* [PATCH 2/2] Acceptance test: update kernel for m68k/q800 test
2019-10-29 23:23 ` [PATCH 0/2] Acceptance test: update kernel used on m68k/q800 test Cleber Rosa
2019-10-29 23:23 ` [PATCH 1/2] Acceptance test: cancel test if m68k kernel packages goes missing Cleber Rosa
@ 2019-10-29 23:23 ` Cleber Rosa
2019-10-31 6:08 ` Alex Bennée
2019-10-31 8:06 ` Alex Bennée
2019-10-31 9:57 ` [PATCH 0/2] Acceptance test: update kernel used on " Alex Bennée
2019-11-07 15:43 ` Eric Blake
3 siblings, 2 replies; 27+ messages in thread
From: Cleber Rosa @ 2019-10-29 23:23 UTC (permalink / raw)
To: qemu-devel
Cc: Peter Maydell, Eduardo Habkost, Philippe Mathieu-Daudé,
Wainer dos Santos Moschetta, Laurent Vivier, Willian Rampazzo,
Cleber Rosa, Philippe Mathieu-Daudé
There's an updated version of the Debian package containing the m68k
Kernel.
Now, if the package gets updated again, the test won't fail, but will
be canceled. A more permanent solution is certainly needed.
Signed-off-by: Cleber Rosa <crosa@redhat.com>
---
tests/acceptance/boot_linux_console.py | 6 +++---
1 file changed, 3 insertions(+), 3 deletions(-)
diff --git a/tests/acceptance/boot_linux_console.py b/tests/acceptance/boot_linux_console.py
index c439fd90fc..8f676d8e92 100644
--- a/tests/acceptance/boot_linux_console.py
+++ b/tests/acceptance/boot_linux_console.py
@@ -385,14 +385,14 @@ class BootLinuxConsole(Test):
:avocado: tags=machine:q800
"""
deb_url = ('http://ftp.ports.debian.org/debian-ports/pool-m68k/main'
- '/l/linux/kernel-image-5.2.0-2-m68k-di_5.2.9-2_m68k.udeb')
- deb_hash = '0797e05129595f22f3c0142db5e199769a723bf9'
+ '/l/linux/kernel-image-5.3.0-1-m68k-di_5.3.7-1_m68k.udeb')
+ deb_hash = '044954bb9be4160a3ce81f8bc1b5e856b75cccd1'
try:
deb_path = self.fetch_asset(deb_url, asset_hash=deb_hash)
except OSError as exp:
self.cancel(exp)
kernel_path = self.extract_from_deb(deb_path,
- '/boot/vmlinux-5.2.0-2-m68k')
+ '/boot/vmlinux-5.3.0-1-m68k')
self.vm.set_machine('q800')
self.vm.set_console()
--
2.21.0
^ permalink raw reply related [flat|nested] 27+ messages in thread
* Re: [PATCH 2/2] Acceptance test: update kernel for m68k/q800 test
2019-10-29 23:23 ` [PATCH 2/2] Acceptance test: update kernel for m68k/q800 test Cleber Rosa
@ 2019-10-31 6:08 ` Alex Bennée
2019-11-07 15:08 ` Wainer dos Santos Moschetta
2019-10-31 8:06 ` Alex Bennée
1 sibling, 1 reply; 27+ messages in thread
From: Alex Bennée @ 2019-10-31 6:08 UTC (permalink / raw)
To: qemu-devel
Cc: Peter Maydell, Eduardo Habkost, Laurent Vivier,
Wainer dos Santos Moschetta, Philippe Mathieu-Daudé,
Willian Rampazzo, Cleber Rosa, Philippe Mathieu-Daudé
Cleber Rosa <crosa@redhat.com> writes:
> There's an updated version of the Debian package containing the m68k
> Kernel.
>
> Now, if the package gets updated again, the test won't fail, but will
> be canceled. A more permanent solution is certainly needed.
At least for open source blobs can't we do something similar to the
firmware and host a blob mirror on our infrastructure as a fallback?
>
> Signed-off-by: Cleber Rosa <crosa@redhat.com>
> ---
> tests/acceptance/boot_linux_console.py | 6 +++---
> 1 file changed, 3 insertions(+), 3 deletions(-)
>
> diff --git a/tests/acceptance/boot_linux_console.py b/tests/acceptance/boot_linux_console.py
> index c439fd90fc..8f676d8e92 100644
> --- a/tests/acceptance/boot_linux_console.py
> +++ b/tests/acceptance/boot_linux_console.py
> @@ -385,14 +385,14 @@ class BootLinuxConsole(Test):
> :avocado: tags=machine:q800
> """
> deb_url = ('http://ftp.ports.debian.org/debian-ports/pool-m68k/main'
> - '/l/linux/kernel-image-5.2.0-2-m68k-di_5.2.9-2_m68k.udeb')
> - deb_hash = '0797e05129595f22f3c0142db5e199769a723bf9'
> + '/l/linux/kernel-image-5.3.0-1-m68k-di_5.3.7-1_m68k.udeb')
> + deb_hash = '044954bb9be4160a3ce81f8bc1b5e856b75cccd1'
> try:
> deb_path = self.fetch_asset(deb_url, asset_hash=deb_hash)
> except OSError as exp:
> self.cancel(exp)
> kernel_path = self.extract_from_deb(deb_path,
> - '/boot/vmlinux-5.2.0-2-m68k')
> + '/boot/vmlinux-5.3.0-1-m68k')
>
> self.vm.set_machine('q800')
> self.vm.set_console()
--
Alex Bennée
^ permalink raw reply [flat|nested] 27+ messages in thread
* Re: [PATCH 1/2] Acceptance test: cancel test if m68k kernel packages goes missing
2019-10-29 23:23 ` [PATCH 1/2] Acceptance test: cancel test if m68k kernel packages goes missing Cleber Rosa
@ 2019-10-31 8:06 ` Alex Bennée
0 siblings, 0 replies; 27+ messages in thread
From: Alex Bennée @ 2019-10-31 8:06 UTC (permalink / raw)
To: qemu-devel
Cc: Peter Maydell, Eduardo Habkost, Laurent Vivier,
Wainer dos Santos Moschetta, Philippe Mathieu-Daudé,
Willian Rampazzo, Cleber Rosa, Philippe Mathieu-Daudé
Cleber Rosa <crosa@redhat.com> writes:
> The Linux kernel that is extracted from a Debian package for the q800
> machine test is hosted on a "pool" location. AFAICT, it gets updated
> without too much ceremony, and I don't see any archival location that
> is stable enough.
>
> For now, to avoid test errors, let's cancel the test if fetching the
> package fails.
>
> Signed-off-by: Cleber Rosa <crosa@redhat.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
> ---
> tests/acceptance/boot_linux_console.py | 5 ++++-
> 1 file changed, 4 insertions(+), 1 deletion(-)
>
> diff --git a/tests/acceptance/boot_linux_console.py b/tests/acceptance/boot_linux_console.py
> index df27813c78..c439fd90fc 100644
> --- a/tests/acceptance/boot_linux_console.py
> +++ b/tests/acceptance/boot_linux_console.py
> @@ -387,7 +387,10 @@ class BootLinuxConsole(Test):
> deb_url = ('http://ftp.ports.debian.org/debian-ports/pool-m68k/main'
> '/l/linux/kernel-image-5.2.0-2-m68k-di_5.2.9-2_m68k.udeb')
> deb_hash = '0797e05129595f22f3c0142db5e199769a723bf9'
> - deb_path = self.fetch_asset(deb_url, asset_hash=deb_hash)
> + try:
> + deb_path = self.fetch_asset(deb_url, asset_hash=deb_hash)
> + except OSError as exp:
> + self.cancel(exp)
> kernel_path = self.extract_from_deb(deb_path,
> '/boot/vmlinux-5.2.0-2-m68k')
--
Alex Bennée
^ permalink raw reply [flat|nested] 27+ messages in thread
* Re: [PATCH 2/2] Acceptance test: update kernel for m68k/q800 test
2019-10-29 23:23 ` [PATCH 2/2] Acceptance test: update kernel for m68k/q800 test Cleber Rosa
2019-10-31 6:08 ` Alex Bennée
@ 2019-10-31 8:06 ` Alex Bennée
1 sibling, 0 replies; 27+ messages in thread
From: Alex Bennée @ 2019-10-31 8:06 UTC (permalink / raw)
To: qemu-devel
Cc: Peter Maydell, Eduardo Habkost, Laurent Vivier,
Wainer dos Santos Moschetta, Philippe Mathieu-Daudé,
Willian Rampazzo, Cleber Rosa, Philippe Mathieu-Daudé
Cleber Rosa <crosa@redhat.com> writes:
> There's an updated version of the Debian package containing the m68k
> Kernel.
>
> Now, if the package gets updated again, the test won't fail, but will
> be canceled. A more permanent solution is certainly needed.
>
> Signed-off-by: Cleber Rosa <crosa@redhat.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Tested-by: Alex Bennée <alex.bennee@linaro.org>
> ---
> tests/acceptance/boot_linux_console.py | 6 +++---
> 1 file changed, 3 insertions(+), 3 deletions(-)
>
> diff --git a/tests/acceptance/boot_linux_console.py b/tests/acceptance/boot_linux_console.py
> index c439fd90fc..8f676d8e92 100644
> --- a/tests/acceptance/boot_linux_console.py
> +++ b/tests/acceptance/boot_linux_console.py
> @@ -385,14 +385,14 @@ class BootLinuxConsole(Test):
> :avocado: tags=machine:q800
> """
> deb_url = ('http://ftp.ports.debian.org/debian-ports/pool-m68k/main'
> - '/l/linux/kernel-image-5.2.0-2-m68k-di_5.2.9-2_m68k.udeb')
> - deb_hash = '0797e05129595f22f3c0142db5e199769a723bf9'
> + '/l/linux/kernel-image-5.3.0-1-m68k-di_5.3.7-1_m68k.udeb')
> + deb_hash = '044954bb9be4160a3ce81f8bc1b5e856b75cccd1'
> try:
> deb_path = self.fetch_asset(deb_url, asset_hash=deb_hash)
> except OSError as exp:
> self.cancel(exp)
> kernel_path = self.extract_from_deb(deb_path,
> - '/boot/vmlinux-5.2.0-2-m68k')
> + '/boot/vmlinux-5.3.0-1-m68k')
>
> self.vm.set_machine('q800')
> self.vm.set_console()
--
Alex Bennée
^ permalink raw reply [flat|nested] 27+ messages in thread
* Re: [PATCH 0/2] Acceptance test: update kernel used on m68k/q800 test
2019-10-29 23:23 ` [PATCH 0/2] Acceptance test: update kernel used on m68k/q800 test Cleber Rosa
2019-10-29 23:23 ` [PATCH 1/2] Acceptance test: cancel test if m68k kernel packages goes missing Cleber Rosa
2019-10-29 23:23 ` [PATCH 2/2] Acceptance test: update kernel for m68k/q800 test Cleber Rosa
@ 2019-10-31 9:57 ` Alex Bennée
2019-11-07 15:43 ` Eric Blake
3 siblings, 0 replies; 27+ messages in thread
From: Alex Bennée @ 2019-10-31 9:57 UTC (permalink / raw)
To: qemu-devel
Cc: Peter Maydell, Eduardo Habkost, Laurent Vivier,
Wainer dos Santos Moschetta, Philippe Mathieu-Daudé,
Willian Rampazzo, Cleber Rosa, Philippe Mathieu-Daudé
Cleber Rosa <crosa@redhat.com> writes:
> The boot_linux_console.py:BootLinuxConsole.test_m68k_q800 was very
> recently merged, but between its last review and now, the Kernel
> package used went missing.
>
> This updates the Kernel package, and protects the test from failing
> if it gets updated again.
Queued to testing/next, thanks. I'll roll it up with Daniel's fix to get
green again.
>
> Cleber Rosa (2):
> Acceptance test: cancel test if m68k kernel packages goes missing
> Acceptance test: update kernel for m68k/q800 test
>
> tests/acceptance/boot_linux_console.py | 11 +++++++----
> 1 file changed, 7 insertions(+), 4 deletions(-)
--
Alex Bennée
^ permalink raw reply [flat|nested] 27+ messages in thread
* Re: [PATCH 2/2] Acceptance test: update kernel for m68k/q800 test
2019-10-31 6:08 ` Alex Bennée
@ 2019-11-07 15:08 ` Wainer dos Santos Moschetta
0 siblings, 0 replies; 27+ messages in thread
From: Wainer dos Santos Moschetta @ 2019-11-07 15:08 UTC (permalink / raw)
To: qemu-devel
Cc: Peter Maydell, Eduardo Habkost, Philippe Mathieu-Daudé,
Philippe Mathieu-Daudé,
Laurent Vivier, Willian Rampazzo, Cleber Rosa, Alex Bennée
On 10/31/19 3:08 AM, Alex Bennée wrote:
> Cleber Rosa <crosa@redhat.com> writes:
>
>> There's an updated version of the Debian package containing the m68k
>> Kernel.
>>
>> Now, if the package gets updated again, the test won't fail, but will
>> be canceled. A more permanent solution is certainly needed.
> At least for open source blobs can't we do something similar to the
> firmware and host a blob mirror on our infrastructure as a fallback?
I support that idea. Some of those kernels used on our acceptance tests
are moving targets.
- Wainer
>
>> Signed-off-by: Cleber Rosa <crosa@redhat.com>
>> ---
>> tests/acceptance/boot_linux_console.py | 6 +++---
>> 1 file changed, 3 insertions(+), 3 deletions(-)
>>
>> diff --git a/tests/acceptance/boot_linux_console.py b/tests/acceptance/boot_linux_console.py
>> index c439fd90fc..8f676d8e92 100644
>> --- a/tests/acceptance/boot_linux_console.py
>> +++ b/tests/acceptance/boot_linux_console.py
>> @@ -385,14 +385,14 @@ class BootLinuxConsole(Test):
>> :avocado: tags=machine:q800
>> """
>> deb_url = ('http://ftp.ports.debian.org/debian-ports/pool-m68k/main'
>> - '/l/linux/kernel-image-5.2.0-2-m68k-di_5.2.9-2_m68k.udeb')
>> - deb_hash = '0797e05129595f22f3c0142db5e199769a723bf9'
>> + '/l/linux/kernel-image-5.3.0-1-m68k-di_5.3.7-1_m68k.udeb')
>> + deb_hash = '044954bb9be4160a3ce81f8bc1b5e856b75cccd1'
>> try:
>> deb_path = self.fetch_asset(deb_url, asset_hash=deb_hash)
>> except OSError as exp:
>> self.cancel(exp)
>> kernel_path = self.extract_from_deb(deb_path,
>> - '/boot/vmlinux-5.2.0-2-m68k')
>> + '/boot/vmlinux-5.3.0-1-m68k')
>>
>> self.vm.set_machine('q800')
>> self.vm.set_console()
>
> --
> Alex Bennée
>
^ permalink raw reply [flat|nested] 27+ messages in thread
* Re: [PATCH 0/2] Acceptance test: update kernel used on m68k/q800 test
2019-10-29 23:23 ` [PATCH 0/2] Acceptance test: update kernel used on m68k/q800 test Cleber Rosa
` (2 preceding siblings ...)
2019-10-31 9:57 ` [PATCH 0/2] Acceptance test: update kernel used on " Alex Bennée
@ 2019-11-07 15:43 ` Eric Blake
2019-11-07 16:38 ` Cleber Rosa
3 siblings, 1 reply; 27+ messages in thread
From: Eric Blake @ 2019-11-07 15:43 UTC (permalink / raw)
To: Cleber Rosa, qemu-devel
Cc: Peter Maydell, Eduardo Habkost, Laurent Vivier,
Wainer dos Santos Moschetta, Philippe Mathieu-Daudé,
Willian Rampazzo, Philippe Mathieu-Daudé
On 10/29/19 6:23 PM, Cleber Rosa wrote:
> The boot_linux_console.py:BootLinuxConsole.test_m68k_q800 was very
> recently merged, but between its last review and now, the Kernel
> package used went missing.
>
meta-question: Why was this series posted in-reply-to the pull request,
rather than as a new top-level thread? I nearly missed it because I
don't expect to see unreviewed patches buried in threading like that.
My workflow would have been to post the series in isolation, then
manually reply to the pull request to mention the message-id of the
related series proposed as a followup.
--
Eric Blake, Principal Software Engineer
Red Hat, Inc. +1-919-301-3226
Virtualization: qemu.org | libvirt.org
^ permalink raw reply [flat|nested] 27+ messages in thread
* Re: [PATCH 0/2] Acceptance test: update kernel used on m68k/q800 test
2019-11-07 15:43 ` Eric Blake
@ 2019-11-07 16:38 ` Cleber Rosa
2019-11-07 17:18 ` Laurent Vivier
0 siblings, 1 reply; 27+ messages in thread
From: Cleber Rosa @ 2019-11-07 16:38 UTC (permalink / raw)
To: Eric Blake
Cc: Peter Maydell, Eduardo Habkost, qemu-devel,
Philippe Mathieu-Daudé,
Wainer dos Santos Moschetta, Laurent Vivier, Willian Rampazzo,
Philippe Mathieu-Daudé
----- Original Message -----
> From: "Eric Blake" <eblake@redhat.com>
> To: "Cleber Rosa" <crosa@redhat.com>, qemu-devel@nongnu.org
> Cc: "Peter Maydell" <peter.maydell@linaro.org>, "Eduardo Habkost" <ehabkost@redhat.com>, "Philippe Mathieu-Daudé"
> <f4bug@amsat.org>, "Wainer dos Santos Moschetta" <wainersm@redhat.com>, "Laurent Vivier" <laurent@vivier.eu>,
> "Willian Rampazzo" <wrampazz@redhat.com>, "Philippe Mathieu-Daudé" <philmd@redhat.com>
> Sent: Thursday, November 7, 2019 10:43:08 AM
> Subject: Re: [PATCH 0/2] Acceptance test: update kernel used on m68k/q800 test
>
> On 10/29/19 6:23 PM, Cleber Rosa wrote:
> > The boot_linux_console.py:BootLinuxConsole.test_m68k_q800 was very
> > recently merged, but between its last review and now, the Kernel
> > package used went missing.
> >
>
> meta-question: Why was this series posted in-reply-to the pull request,
> rather than as a new top-level thread? I nearly missed it because I
> don't expect to see unreviewed patches buried in threading like that.
> My workflow would have been to post the series in isolation, then
> manually reply to the pull request to mention the message-id of the
> related series proposed as a followup.
>
Hi Eric,
That was my attempt to signal that it was a fix to something which had *just*
being merged as part of that pull request (though now caused by it).
I basically did not know how to act properly, so I thank you for the workflow
suggestion. I'll certainly follow it next time.
Thanks a lot!
- Cleber.
> --
> Eric Blake, Principal Software Engineer
> Red Hat, Inc. +1-919-301-3226
> Virtualization: qemu.org | libvirt.org
>
^ permalink raw reply [flat|nested] 27+ messages in thread
* Re: [PATCH 0/2] Acceptance test: update kernel used on m68k/q800 test
2019-11-07 16:38 ` Cleber Rosa
@ 2019-11-07 17:18 ` Laurent Vivier
2019-11-07 18:00 ` Philippe Mathieu-Daudé
0 siblings, 1 reply; 27+ messages in thread
From: Laurent Vivier @ 2019-11-07 17:18 UTC (permalink / raw)
To: Cleber Rosa, Eric Blake
Cc: Peter Maydell, Eduardo Habkost, Philippe Mathieu-Daudé,
Wainer dos Santos Moschetta, qemu-devel, Willian Rampazzo,
Philippe Mathieu-Daudé
Le 07/11/2019 à 17:38, Cleber Rosa a écrit :
>
>
> ----- Original Message -----
>> From: "Eric Blake" <eblake@redhat.com>
>> To: "Cleber Rosa" <crosa@redhat.com>, qemu-devel@nongnu.org
>> Cc: "Peter Maydell" <peter.maydell@linaro.org>, "Eduardo Habkost" <ehabkost@redhat.com>, "Philippe Mathieu-Daudé"
>> <f4bug@amsat.org>, "Wainer dos Santos Moschetta" <wainersm@redhat.com>, "Laurent Vivier" <laurent@vivier.eu>,
>> "Willian Rampazzo" <wrampazz@redhat.com>, "Philippe Mathieu-Daudé" <philmd@redhat.com>
>> Sent: Thursday, November 7, 2019 10:43:08 AM
>> Subject: Re: [PATCH 0/2] Acceptance test: update kernel used on m68k/q800 test
>>
>> On 10/29/19 6:23 PM, Cleber Rosa wrote:
>>> The boot_linux_console.py:BootLinuxConsole.test_m68k_q800 was very
>>> recently merged, but between its last review and now, the Kernel
>>> package used went missing.
>>>
>>
>> meta-question: Why was this series posted in-reply-to the pull request,
>> rather than as a new top-level thread? I nearly missed it because I
>> don't expect to see unreviewed patches buried in threading like that.
>> My workflow would have been to post the series in isolation, then
>> manually reply to the pull request to mention the message-id of the
>> related series proposed as a followup.
>>
>
> Hi Eric,
>
> That was my attempt to signal that it was a fix to something which had *just*
> being merged as part of that pull request (though now caused by it).
>
> I basically did not know how to act properly, so I thank you for the workflow
> suggestion. I'll certainly follow it next time.
IMHO, you should send your series and then replies to the pull request
to tell you have sent your series that fixes the patch in the pull
request, or vice-versa.
But your series has been queued by Alex, so there is no problem...
Thanks,
Laurent
^ permalink raw reply [flat|nested] 27+ messages in thread
* Re: [PATCH 0/2] Acceptance test: update kernel used on m68k/q800 test
2019-11-07 17:18 ` Laurent Vivier
@ 2019-11-07 18:00 ` Philippe Mathieu-Daudé
2019-11-07 18:25 ` Laurent Vivier
0 siblings, 1 reply; 27+ messages in thread
From: Philippe Mathieu-Daudé @ 2019-11-07 18:00 UTC (permalink / raw)
To: Laurent Vivier, Cleber Rosa, Eric Blake
Cc: Peter Maydell, Eduardo Habkost, Philippe Mathieu-Daudé,
Wainer dos Santos Moschetta, qemu-devel, Willian Rampazzo
On 11/7/19 6:18 PM, Laurent Vivier wrote:
> Le 07/11/2019 à 17:38, Cleber Rosa a écrit :
>> ----- Original Message -----
>>> From: "Eric Blake" <eblake@redhat.com>
>>> To: "Cleber Rosa" <crosa@redhat.com>, qemu-devel@nongnu.org
>>> Cc: "Peter Maydell" <peter.maydell@linaro.org>, "Eduardo Habkost" <ehabkost@redhat.com>, "Philippe Mathieu-Daudé"
>>> <f4bug@amsat.org>, "Wainer dos Santos Moschetta" <wainersm@redhat.com>, "Laurent Vivier" <laurent@vivier.eu>,
>>> "Willian Rampazzo" <wrampazz@redhat.com>, "Philippe Mathieu-Daudé" <philmd@redhat.com>
>>> Sent: Thursday, November 7, 2019 10:43:08 AM
>>> Subject: Re: [PATCH 0/2] Acceptance test: update kernel used on m68k/q800 test
>>>
>>> On 10/29/19 6:23 PM, Cleber Rosa wrote:
>>>> The boot_linux_console.py:BootLinuxConsole.test_m68k_q800 was very
>>>> recently merged, but between its last review and now, the Kernel
>>>> package used went missing.
>>>>
>>>
>>> meta-question: Why was this series posted in-reply-to the pull request,
>>> rather than as a new top-level thread? I nearly missed it because I
>>> don't expect to see unreviewed patches buried in threading like that.
>>> My workflow would have been to post the series in isolation, then
>>> manually reply to the pull request to mention the message-id of the
>>> related series proposed as a followup.
>>>
>>
>> Hi Eric,
>>
>> That was my attempt to signal that it was a fix to something which had *just*
>> being merged as part of that pull request (though now caused by it).
>>
>> I basically did not know how to act properly, so I thank you for the workflow
>> suggestion. I'll certainly follow it next time.
>
> IMHO, you should send your series and then replies to the pull request
> to tell you have sent your series that fixes the patch in the pull
> request, or vice-versa.
>
> But your series has been queued by Alex, so there is no problem...
I prepared a different fix around the same time, but closed my laptop
before the patch was sent and noticed the next day:
https://lists.gnu.org/archive/html/qemu-devel/2019-10/msg08120.html
Laurent, are you OK with the new kernel being tested?
^ permalink raw reply [flat|nested] 27+ messages in thread
* Re: [PATCH 0/2] Acceptance test: update kernel used on m68k/q800 test
2019-11-07 18:00 ` Philippe Mathieu-Daudé
@ 2019-11-07 18:25 ` Laurent Vivier
0 siblings, 0 replies; 27+ messages in thread
From: Laurent Vivier @ 2019-11-07 18:25 UTC (permalink / raw)
To: Philippe Mathieu-Daudé, Cleber Rosa, Eric Blake
Cc: Peter Maydell, Eduardo Habkost, qemu-devel,
Wainer dos Santos Moschetta, Philippe Mathieu-Daudé,
Willian Rampazzo
Le 07/11/2019 à 19:00, Philippe Mathieu-Daudé a écrit :
> On 11/7/19 6:18 PM, Laurent Vivier wrote:
>> Le 07/11/2019 à 17:38, Cleber Rosa a écrit :
>>> ----- Original Message -----
>>>> From: "Eric Blake" <eblake@redhat.com>
>>>> To: "Cleber Rosa" <crosa@redhat.com>, qemu-devel@nongnu.org
>>>> Cc: "Peter Maydell" <peter.maydell@linaro.org>, "Eduardo Habkost"
>>>> <ehabkost@redhat.com>, "Philippe Mathieu-Daudé"
>>>> <f4bug@amsat.org>, "Wainer dos Santos Moschetta"
>>>> <wainersm@redhat.com>, "Laurent Vivier" <laurent@vivier.eu>,
>>>> "Willian Rampazzo" <wrampazz@redhat.com>, "Philippe Mathieu-Daudé"
>>>> <philmd@redhat.com>
>>>> Sent: Thursday, November 7, 2019 10:43:08 AM
>>>> Subject: Re: [PATCH 0/2] Acceptance test: update kernel used on
>>>> m68k/q800 test
>>>>
>>>> On 10/29/19 6:23 PM, Cleber Rosa wrote:
>>>>> The boot_linux_console.py:BootLinuxConsole.test_m68k_q800 was very
>>>>> recently merged, but between its last review and now, the Kernel
>>>>> package used went missing.
>>>>>
>>>>
>>>> meta-question: Why was this series posted in-reply-to the pull request,
>>>> rather than as a new top-level thread? I nearly missed it because I
>>>> don't expect to see unreviewed patches buried in threading like that.
>>>> My workflow would have been to post the series in isolation, then
>>>> manually reply to the pull request to mention the message-id of the
>>>> related series proposed as a followup.
>>>>
>>>
>>> Hi Eric,
>>>
>>> That was my attempt to signal that it was a fix to something which
>>> had *just*
>>> being merged as part of that pull request (though now caused by it).
>>>
>>> I basically did not know how to act properly, so I thank you for the
>>> workflow
>>> suggestion. I'll certainly follow it next time.
>>
>> IMHO, you should send your series and then replies to the pull request
>> to tell you have sent your series that fixes the patch in the pull
>> request, or vice-versa.
>>
>> But your series has been queued by Alex, so there is no problem...
>
> I prepared a different fix around the same time, but closed my laptop
> before the patch was sent and noticed the next day:
> https://lists.gnu.org/archive/html/qemu-devel/2019-10/msg08120.html
>
> Laurent, are you OK with the new kernel being tested?
>
I'm fine. We could have problems with 5.4 because the address mapping
has been changed for SWIM (aee6bff1c325 "m68k: mac: Revisit floppy disc
controller base addresses), but this has been fixed by my patch that has
been merged today in QEMU (653901ca2b "q800: fix I/O memory map").
Thanks,
Laurent
^ permalink raw reply [flat|nested] 27+ messages in thread
end of thread, other threads:[~2019-11-07 18:32 UTC | newest]
Thread overview: 27+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2019-10-28 18:16 [PULL 00/11] Q800 branch patches Laurent Vivier
2019-10-28 18:16 ` [PULL 01/11] esp: move handle_ti_cmd() cleanup code to esp_do_dma() Laurent Vivier
2019-10-28 18:16 ` [PULL 02/11] esp: move get_cmd() post-DMA code to get_cmd_cb() Laurent Vivier
2019-10-28 18:16 ` [PULL 03/11] esp: add pseudo-DMA as used by Macintosh Laurent Vivier
2019-10-28 18:16 ` [PULL 04/11] dp8393x: manage big endian bus Laurent Vivier
2019-10-28 18:16 ` [PULL 05/11] hw/m68k: add VIA support Laurent Vivier
2019-10-28 18:16 ` [PULL 06/11] hw/m68k: implement ADB bus support for via Laurent Vivier
2019-10-28 18:16 ` [PULL 07/11] hw/m68k: add Nubus support Laurent Vivier
2019-10-28 18:16 ` [PULL 08/11] hw/m68k: add Nubus macfb video card Laurent Vivier
2019-10-28 18:16 ` [PULL 09/11] hw/m68k: add a dummy SWIM floppy controller Laurent Vivier
2019-10-28 18:16 ` [PULL 10/11] hw/m68k: define Macintosh Quadra 800 Laurent Vivier
2019-10-28 18:16 ` [PULL 11/11] BootLinuxConsoleTest: Test the " Laurent Vivier
2019-10-29 23:23 ` [PATCH 0/2] Acceptance test: update kernel used on m68k/q800 test Cleber Rosa
2019-10-29 23:23 ` [PATCH 1/2] Acceptance test: cancel test if m68k kernel packages goes missing Cleber Rosa
2019-10-31 8:06 ` Alex Bennée
2019-10-29 23:23 ` [PATCH 2/2] Acceptance test: update kernel for m68k/q800 test Cleber Rosa
2019-10-31 6:08 ` Alex Bennée
2019-11-07 15:08 ` Wainer dos Santos Moschetta
2019-10-31 8:06 ` Alex Bennée
2019-10-31 9:57 ` [PATCH 0/2] Acceptance test: update kernel used on " Alex Bennée
2019-11-07 15:43 ` Eric Blake
2019-11-07 16:38 ` Cleber Rosa
2019-11-07 17:18 ` Laurent Vivier
2019-11-07 18:00 ` Philippe Mathieu-Daudé
2019-11-07 18:25 ` Laurent Vivier
2019-10-28 23:55 ` [PULL 00/11] Q800 branch patches no-reply
2019-10-29 18:06 ` Peter Maydell
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.