* [BUG] network is broken on Orange Pi PC @ 2021-05-31 21:35 Heinrich Schuchardt 2021-06-02 13:08 ` Ramon Fried 0 siblings, 1 reply; 11+ messages in thread From: Heinrich Schuchardt @ 2021-05-31 21:35 UTC (permalink / raw) To: Joe Hershberger, Ramon Fried, Jagan Teki, Andre Przywara Cc: U-Boot Mailing List Dear all, network is broken in U-Boot on orangepi_pc_defconfig: U-Boot 2021.07-rc3-00059-gd8729a114e (May 31 2021 - 21:26:56 +0000) Allwinner Technology eth0: ethernet@1c30000 => dhcp sun8i_emac_eth_start: Timeout Best regards Heinrich ^ permalink raw reply [flat|nested] 11+ messages in thread
* Re: [BUG] network is broken on Orange Pi PC 2021-05-31 21:35 [BUG] network is broken on Orange Pi PC Heinrich Schuchardt @ 2021-06-02 13:08 ` Ramon Fried 2021-06-03 7:46 ` Heinrich Schuchardt 0 siblings, 1 reply; 11+ messages in thread From: Ramon Fried @ 2021-06-02 13:08 UTC (permalink / raw) To: Heinrich Schuchardt Cc: Joe Hershberger, Jagan Teki, Andre Przywara, U-Boot Mailing List On Tue, Jun 1, 2021 at 12:35 AM Heinrich Schuchardt <xypron.glpk@gmx.de> wrote: > > Dear all, > > network is broken in U-Boot on orangepi_pc_defconfig: > > U-Boot 2021.07-rc3-00059-gd8729a114e (May 31 2021 - 21:26:56 +0000) > Allwinner Technology > eth0: ethernet@1c30000 > => dhcp > sun8i_emac_eth_start: Timeout > > Best regards > > Heinrich > Hi Heinrich, I don't have OrangePi. can you bisect and tell me when it broke ? Thanks. Ramon. ^ permalink raw reply [flat|nested] 11+ messages in thread
* Re: [BUG] network is broken on Orange Pi PC 2021-06-02 13:08 ` Ramon Fried @ 2021-06-03 7:46 ` Heinrich Schuchardt 2021-06-03 9:04 ` Andre Przywara 0 siblings, 1 reply; 11+ messages in thread From: Heinrich Schuchardt @ 2021-06-03 7:46 UTC (permalink / raw) To: Ramon Fried Cc: Joe Hershberger, Jagan Teki, Andre Przywara, U-Boot Mailing List On 6/2/21 3:08 PM, Ramon Fried wrote: > On Tue, Jun 1, 2021 at 12:35 AM Heinrich Schuchardt <xypron.glpk@gmx.de> wrote: >> >> Dear all, >> >> network is broken in U-Boot on orangepi_pc_defconfig: >> >> U-Boot 2021.07-rc3-00059-gd8729a114e (May 31 2021 - 21:26:56 +0000) >> Allwinner Technology >> eth0: ethernet@1c30000 >> => dhcp >> sun8i_emac_eth_start: Timeout >> >> Best regards >> >> Heinrich >> > Hi Heinrich, I don't have OrangePi. can you bisect and tell me when it broke ? > Thanks. > Ramon. > Git bisect points to: commit 4f0278dac56a658ef1e0967fec0bb95372a875bd Author: Andre Przywara <andre.przywara@arm.com> Date: Mon Jul 6 01:40:45 2020 +0100 net: sun8i-emac: Lower MDIO frequency Reverting the patch solves the problem for the OrangePi PC. According to the commit message the change was only needed for needed for external PHYs. Can't we let the change depend on priv->use_internal_phy? diff --git a/drivers/net/sun8i_emac.c b/drivers/net/sun8i_emac.c index 5a1b38bf80..d7553fe163 100644 --- a/drivers/net/sun8i_emac.c +++ b/drivers/net/sun8i_emac.c @@ -211,7 +211,9 @@ static int sun8i_mdio_read(struct mii_dev *bus, int addr, int devad, int reg) * The EMAC clock is either 200 or 300 MHz, so we need a divider * of 128 to get the MDIO frequency below the required 2.5 MHz. */ - mii_cmd |= MDIO_CMD_MII_CLK_CSR_DIV_128 << MDIO_CMD_MII_CLK_CSR_SHIFT; + if (!priv->use_internal_phy) + mii_cmd |= MDIO_CMD_MII_CLK_CSR_DIV_128 << + MDIO_CMD_MII_CLK_CSR_SHIFT; mii_cmd |= MDIO_CMD_MII_BUSY; @@ -242,7 +244,9 @@ static int sun8i_mdio_write(struct mii_dev *bus, int addr, int devad, int reg, * The EMAC clock is either 200 or 300 MHz, so we need a divider * of 128 to get the MDIO frequency below the required 2.5 MHz. */ - mii_cmd |= MDIO_CMD_MII_CLK_CSR_DIV_128 << MDIO_CMD_MII_CLK_CSR_SHIFT; + if (!priv->use_internal_phy) + mii_cmd |= MDIO_CMD_MII_CLK_CSR_DIV_128 << + MDIO_CMD_MII_CLK_CSR_SHIFT; mii_cmd |= MDIO_CMD_MII_WRITE; mii_cmd |= MDIO_CMD_MII_BUSY; Best regards Heinrich I would assume the problem hits all H3 boards. Best regards Heinrich ^ permalink raw reply related [flat|nested] 11+ messages in thread
* Re: [BUG] network is broken on Orange Pi PC 2021-06-03 7:46 ` Heinrich Schuchardt @ 2021-06-03 9:04 ` Andre Przywara 2021-06-03 10:20 ` Heinrich Schuchardt 0 siblings, 1 reply; 11+ messages in thread From: Andre Przywara @ 2021-06-03 9:04 UTC (permalink / raw) To: Heinrich Schuchardt Cc: Ramon Fried, Joe Hershberger, Jagan Teki, U-Boot Mailing List, Andreas Rehn On Thu, 3 Jun 2021 09:46:48 +0200 Heinrich Schuchardt <xypron.glpk@gmx.de> wrote: Hi Heinrich, > On 6/2/21 3:08 PM, Ramon Fried wrote: > > On Tue, Jun 1, 2021 at 12:35 AM Heinrich Schuchardt <xypron.glpk@gmx.de> wrote: > >> > >> Dear all, > >> > >> network is broken in U-Boot on orangepi_pc_defconfig: Thanks for the report! > >> > >> U-Boot 2021.07-rc3-00059-gd8729a114e (May 31 2021 - 21:26:56 +0000) > >> Allwinner Technology > >> eth0: ethernet@1c30000 > >> => dhcp > >> sun8i_emac_eth_start: Timeout > >> > >> Best regards > >> > >> Heinrich > >> > > Hi Heinrich, I don't have OrangePi. can you bisect and tell me when it broke ? > > Thanks. > > Ramon. > > > > Git bisect points to: > > commit 4f0278dac56a658ef1e0967fec0bb95372a875bd > Author: Andre Przywara <andre.przywara@arm.com> > Date: Mon Jul 6 01:40:45 2020 +0100 > > net: sun8i-emac: Lower MDIO frequency > > Reverting the patch solves the problem for the OrangePi PC. > > According to the commit message the change was only needed for needed > for external PHYs. The external PHY on the Pine64 (non-plus) was the trigger, however both the manual and the Linux driver point to that we definitely need a higher divider. From what I can see, AHB2 (the EMAC clock) runs at 200 MHz (AHB2=AHB1/1=PLL6/3=200 MHz). So just having "/ 16" results in 12.5 MHz MDIO frequency. Can you check whether any other divider values fix this for you as well? > Can't we let the change depend on priv->use_internal_phy? > > diff --git a/drivers/net/sun8i_emac.c b/drivers/net/sun8i_emac.c > index 5a1b38bf80..d7553fe163 100644 > --- a/drivers/net/sun8i_emac.c > +++ b/drivers/net/sun8i_emac.c > @@ -211,7 +211,9 @@ static int sun8i_mdio_read(struct mii_dev *bus, int > addr, int devad, int reg) > * The EMAC clock is either 200 or 300 MHz, so we need a divider > * of 128 to get the MDIO frequency below the required 2.5 MHz. > */ > - mii_cmd |= MDIO_CMD_MII_CLK_CSR_DIV_128 << > MDIO_CMD_MII_CLK_CSR_SHIFT; > + if (!priv->use_internal_phy) > + mii_cmd |= MDIO_CMD_MII_CLK_CSR_DIV_128 << > + MDIO_CMD_MII_CLK_CSR_SHIFT; > > mii_cmd |= MDIO_CMD_MII_BUSY; > > @@ -242,7 +244,9 @@ static int sun8i_mdio_write(struct mii_dev *bus, int > addr, int devad, int reg, > * The EMAC clock is either 200 or 300 MHz, so we need a divider > * of 128 to get the MDIO frequency below the required 2.5 MHz. > */ > - mii_cmd |= MDIO_CMD_MII_CLK_CSR_DIV_128 << > MDIO_CMD_MII_CLK_CSR_SHIFT; > + if (!priv->use_internal_phy) > + mii_cmd |= MDIO_CMD_MII_CLK_CSR_DIV_128 << > + MDIO_CMD_MII_CLK_CSR_SHIFT; > > mii_cmd |= MDIO_CMD_MII_WRITE; > mii_cmd |= MDIO_CMD_MII_BUSY; > > Best regards > > Heinrich > > I would assume the problem hits all H3 boards. And that's the confusing part: it does not. I tested this on my OrangePi Zero (H2+ with internal PHY), both back then with the original MDIO frequency patch and also now after your report. It always worked reliably for me. Also: I am still puzzled how one influences the other: The error you get is from the *MAC* soft reset: I would think this is an independent operation from any communication attempts with the PHY. There is this thread here about the same symptom on a V3s: https://lists.denx.de/pipermail/u-boot/2021-May/450315.html v2 of this original patch (in the same thread) proposes some other solution, which I am also not very happy with. But just to get some more data points: can you check whether skipping the soft reset fixes this for you? I will have a closer look tonight to check the order of soft reset and PHY communication. Maybe we should only do the soft reset *once* when the MAC probes, and not on every .start call? Thanks, Andre ^ permalink raw reply [flat|nested] 11+ messages in thread
* Re: [BUG] network is broken on Orange Pi PC 2021-06-03 9:04 ` Andre Przywara @ 2021-06-03 10:20 ` Heinrich Schuchardt 2021-06-03 11:04 ` Andre Przywara 0 siblings, 1 reply; 11+ messages in thread From: Heinrich Schuchardt @ 2021-06-03 10:20 UTC (permalink / raw) To: Andre Przywara Cc: Ramon Fried, Joe Hershberger, Jagan Teki, U-Boot Mailing List, Andreas Rehn On 6/3/21 11:04 AM, Andre Przywara wrote: > On Thu, 3 Jun 2021 09:46:48 +0200 > Heinrich Schuchardt <xypron.glpk@gmx.de> wrote: > > Hi Heinrich, > >> On 6/2/21 3:08 PM, Ramon Fried wrote: >>> On Tue, Jun 1, 2021 at 12:35 AM Heinrich Schuchardt <xypron.glpk@gmx.de> wrote: >>>> >>>> Dear all, >>>> >>>> network is broken in U-Boot on orangepi_pc_defconfig: > > Thanks for the report! > >>>> >>>> U-Boot 2021.07-rc3-00059-gd8729a114e (May 31 2021 - 21:26:56 +0000) >>>> Allwinner Technology >>>> eth0: ethernet@1c30000 >>>> => dhcp >>>> sun8i_emac_eth_start: Timeout >>>> >>>> Best regards >>>> >>>> Heinrich >>>> >>> Hi Heinrich, I don't have OrangePi. can you bisect and tell me when it broke ? >>> Thanks. >>> Ramon. >>> >> >> Git bisect points to: >> >> commit 4f0278dac56a658ef1e0967fec0bb95372a875bd >> Author: Andre Przywara <andre.przywara@arm.com> >> Date: Mon Jul 6 01:40:45 2020 +0100 >> >> net: sun8i-emac: Lower MDIO frequency >> >> Reverting the patch solves the problem for the OrangePi PC. >> >> According to the commit message the change was only needed for needed >> for external PHYs. > > The external PHY on the Pine64 (non-plus) was the trigger, however > both the manual and the Linux driver point to that we definitely need a > higher divider. From what I can see, AHB2 (the EMAC clock) runs at 200 > MHz (AHB2=AHB1/1=PLL6/3=200 MHz). So just having "/ 16" results in 12.5 > MHz MDIO frequency. Can you check whether any other divider values fix > this for you as well? MDIO_CMD_MII_CLK_CSR_DIV_16 = 0 and this is the value that was used before your patch. MDIO_CMD_MII_CLK_CSR_DIV_16 = 0 => Waiting for PHY auto negotiation to complete. done MDIO_CMD_MII_CLK_CSR_DIV_32 = 1 => sun8i_emac_eth_start: Timeout MDIO_CMD_MII_CLK_CSR_DIV_64 = 2 => sun8i_emac_eth_start: Timeout MDIO_CMD_MII_CLK_CSR_DIV_128 = 3 => sun8i_emac_eth_start: Timeout What is wrong about the approach in [PATCH 1/1] net: sun8i-emac: fix MDIO frequency https://lists.denx.de/pipermail/u-boot/2021-June/451305.html ? The Linux 5.10 driver runs fine no matter what value we choose for the divider in U-Boot. But I see a message: dwmac-sun8i 1c30000.ethernet: Current syscon value is not the default 148000 (expect 58000) @default_syscon_value: The default value of the EMAC register in syscon This value is used for disabling properly EMAC and used as a good starting value in case of the boot process(uboot) leave some stuff. Best regards Heinrich > >> Can't we let the change depend on priv->use_internal_phy? >> >> diff --git a/drivers/net/sun8i_emac.c b/drivers/net/sun8i_emac.c >> index 5a1b38bf80..d7553fe163 100644 >> --- a/drivers/net/sun8i_emac.c >> +++ b/drivers/net/sun8i_emac.c >> @@ -211,7 +211,9 @@ static int sun8i_mdio_read(struct mii_dev *bus, int >> addr, int devad, int reg) >> * The EMAC clock is either 200 or 300 MHz, so we need a divider >> * of 128 to get the MDIO frequency below the required 2.5 MHz. >> */ >> - mii_cmd |= MDIO_CMD_MII_CLK_CSR_DIV_128 << >> MDIO_CMD_MII_CLK_CSR_SHIFT; >> + if (!priv->use_internal_phy) >> + mii_cmd |= MDIO_CMD_MII_CLK_CSR_DIV_128 << >> + MDIO_CMD_MII_CLK_CSR_SHIFT; >> >> mii_cmd |= MDIO_CMD_MII_BUSY; >> >> @@ -242,7 +244,9 @@ static int sun8i_mdio_write(struct mii_dev *bus, int >> addr, int devad, int reg, >> * The EMAC clock is either 200 or 300 MHz, so we need a divider >> * of 128 to get the MDIO frequency below the required 2.5 MHz. >> */ >> - mii_cmd |= MDIO_CMD_MII_CLK_CSR_DIV_128 << >> MDIO_CMD_MII_CLK_CSR_SHIFT; >> + if (!priv->use_internal_phy) >> + mii_cmd |= MDIO_CMD_MII_CLK_CSR_DIV_128 << >> + MDIO_CMD_MII_CLK_CSR_SHIFT; >> >> mii_cmd |= MDIO_CMD_MII_WRITE; >> mii_cmd |= MDIO_CMD_MII_BUSY; >> >> Best regards >> >> Heinrich >> >> I would assume the problem hits all H3 boards. > > And that's the confusing part: it does not. I tested this on my > OrangePi Zero (H2+ with internal PHY), both back then with the original > MDIO frequency patch and also now after your report. It always worked > reliably for me. > Also: I am still puzzled how one influences the other: The error you > get is from the *MAC* soft reset: I would think this is an independent > operation from any communication attempts with the PHY. > > There is this thread here about the same symptom on a V3s: > https://lists.denx.de/pipermail/u-boot/2021-May/450315.html > v2 of this original patch (in the same thread) proposes some other > solution, which I am also not very happy with. But just to get some more > data points: can you check whether skipping the soft reset fixes this > for you? I will have a closer look tonight to check the order of soft > reset and PHY communication. Maybe we should only do the soft reset > *once* when the MAC probes, and not on every .start call? > > Thanks, > Andre > ^ permalink raw reply [flat|nested] 11+ messages in thread
* Re: [BUG] network is broken on Orange Pi PC 2021-06-03 10:20 ` Heinrich Schuchardt @ 2021-06-03 11:04 ` Andre Przywara 2021-06-03 16:09 ` Heinrich Schuchardt 0 siblings, 1 reply; 11+ messages in thread From: Andre Przywara @ 2021-06-03 11:04 UTC (permalink / raw) To: Heinrich Schuchardt Cc: Ramon Fried, Joe Hershberger, Jagan Teki, U-Boot Mailing List, Andreas Rehn On Thu, 3 Jun 2021 12:20:34 +0200 Heinrich Schuchardt <xypron.glpk@gmx.de> wrote: Hi, > On 6/3/21 11:04 AM, Andre Przywara wrote: > > On Thu, 3 Jun 2021 09:46:48 +0200 > > Heinrich Schuchardt <xypron.glpk@gmx.de> wrote: > > > > Hi Heinrich, > > > >> On 6/2/21 3:08 PM, Ramon Fried wrote: > >>> On Tue, Jun 1, 2021 at 12:35 AM Heinrich Schuchardt <xypron.glpk@gmx.de> wrote: > >>>> > >>>> Dear all, > >>>> > >>>> network is broken in U-Boot on orangepi_pc_defconfig: > > > > Thanks for the report! > > > >>>> > >>>> U-Boot 2021.07-rc3-00059-gd8729a114e (May 31 2021 - 21:26:56 +0000) > >>>> Allwinner Technology > >>>> eth0: ethernet@1c30000 > >>>> => dhcp > >>>> sun8i_emac_eth_start: Timeout > >>>> > >>>> Best regards > >>>> > >>>> Heinrich > >>>> > >>> Hi Heinrich, I don't have OrangePi. can you bisect and tell me when it broke ? > >>> Thanks. > >>> Ramon. > >>> > >> > >> Git bisect points to: > >> > >> commit 4f0278dac56a658ef1e0967fec0bb95372a875bd > >> Author: Andre Przywara <andre.przywara@arm.com> > >> Date: Mon Jul 6 01:40:45 2020 +0100 > >> > >> net: sun8i-emac: Lower MDIO frequency > >> > >> Reverting the patch solves the problem for the OrangePi PC. > >> > >> According to the commit message the change was only needed for needed > >> for external PHYs. > > > > The external PHY on the Pine64 (non-plus) was the trigger, however > > both the manual and the Linux driver point to that we definitely need a > > higher divider. From what I can see, AHB2 (the EMAC clock) runs at 200 > > MHz (AHB2=AHB1/1=PLL6/3=200 MHz). So just having "/ 16" results in 12.5 > > MHz MDIO frequency. Can you check whether any other divider values fix > > this for you as well? > > MDIO_CMD_MII_CLK_CSR_DIV_16 = 0 and this is the value that was used > before your patch. > > MDIO_CMD_MII_CLK_CSR_DIV_16 = 0 => > Waiting for PHY auto negotiation to complete. done > MDIO_CMD_MII_CLK_CSR_DIV_32 = 1 => sun8i_emac_eth_start: Timeout > MDIO_CMD_MII_CLK_CSR_DIV_64 = 2 => sun8i_emac_eth_start: Timeout > MDIO_CMD_MII_CLK_CSR_DIV_128 = 3 => sun8i_emac_eth_start: Timeout > > What is wrong about the approach in > > [PATCH 1/1] net: sun8i-emac: fix MDIO frequency > https://lists.denx.de/pipermail/u-boot/2021-June/451305.html ? The MDIO spec says that the maximum frequency on the MDIO bus should be 2.5 MHz. On the H3 with 200 MHz AHB and with a divider of 16 it's 12.5 MHz. Apparently the internal H3 PHY can tolerate those high frequencies, but it's beyond the spec. And certainly it should not fail with lower frequencies. And indeed it works for me on the H2+ (which I understand is just a binned version of the H3). > The Linux 5.10 driver runs fine no matter what value we choose for the > divider in U-Boot. Because it programs the divider correctly: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/tree/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c#n316 I take it you have no problems with Linux, so the divider being too high cannot be the root cause of the problem. So I'd rather fix this problem properly and correctly, especially as it seems to be more related to the EMAC soft reset (where your error message comes from). > But I see a message: > > dwmac-sun8i 1c30000.ethernet: > Current syscon value is not the default 148000 (expect 58000) > > @default_syscon_value: > The default value of the EMAC register in syscon > This value is used for disabling properly EMAC > and used as a good starting value in case of the > boot process(uboot) leave some stuff. Yeah, I never got the reason for this message. If Linux wants a certain value, it should program that. Whatever was left by someone else (be it U-Boot or some other software/OS) should not matter. Cheers, Andre > > Best regards > > Heinrich > > > > >> Can't we let the change depend on priv->use_internal_phy? > >> > >> diff --git a/drivers/net/sun8i_emac.c b/drivers/net/sun8i_emac.c > >> index 5a1b38bf80..d7553fe163 100644 > >> --- a/drivers/net/sun8i_emac.c > >> +++ b/drivers/net/sun8i_emac.c > >> @@ -211,7 +211,9 @@ static int sun8i_mdio_read(struct mii_dev *bus, int > >> addr, int devad, int reg) > >> * The EMAC clock is either 200 or 300 MHz, so we need a divider > >> * of 128 to get the MDIO frequency below the required 2.5 MHz. > >> */ > >> - mii_cmd |= MDIO_CMD_MII_CLK_CSR_DIV_128 << > >> MDIO_CMD_MII_CLK_CSR_SHIFT; > >> + if (!priv->use_internal_phy) > >> + mii_cmd |= MDIO_CMD_MII_CLK_CSR_DIV_128 << > >> + MDIO_CMD_MII_CLK_CSR_SHIFT; > >> > >> mii_cmd |= MDIO_CMD_MII_BUSY; > >> > >> @@ -242,7 +244,9 @@ static int sun8i_mdio_write(struct mii_dev *bus, int > >> addr, int devad, int reg, > >> * The EMAC clock is either 200 or 300 MHz, so we need a divider > >> * of 128 to get the MDIO frequency below the required 2.5 MHz. > >> */ > >> - mii_cmd |= MDIO_CMD_MII_CLK_CSR_DIV_128 << > >> MDIO_CMD_MII_CLK_CSR_SHIFT; > >> + if (!priv->use_internal_phy) > >> + mii_cmd |= MDIO_CMD_MII_CLK_CSR_DIV_128 << > >> + MDIO_CMD_MII_CLK_CSR_SHIFT; > >> > >> mii_cmd |= MDIO_CMD_MII_WRITE; > >> mii_cmd |= MDIO_CMD_MII_BUSY; > >> > >> Best regards > >> > >> Heinrich > >> > >> I would assume the problem hits all H3 boards. > > > > And that's the confusing part: it does not. I tested this on my > > OrangePi Zero (H2+ with internal PHY), both back then with the original > > MDIO frequency patch and also now after your report. It always worked > > reliably for me. > > Also: I am still puzzled how one influences the other: The error you > > get is from the *MAC* soft reset: I would think this is an independent > > operation from any communication attempts with the PHY. > > > > There is this thread here about the same symptom on a V3s: > > https://lists.denx.de/pipermail/u-boot/2021-May/450315.html > > v2 of this original patch (in the same thread) proposes some other > > solution, which I am also not very happy with. But just to get some more > > data points: can you check whether skipping the soft reset fixes this > > for you? I will have a closer look tonight to check the order of soft > > reset and PHY communication. Maybe we should only do the soft reset > > *once* when the MAC probes, and not on every .start call? > > > > Thanks, > > Andre > > > ^ permalink raw reply [flat|nested] 11+ messages in thread
* Re: [BUG] network is broken on Orange Pi PC 2021-06-03 11:04 ` Andre Przywara @ 2021-06-03 16:09 ` Heinrich Schuchardt 2021-06-03 16:57 ` Andre Przywara 0 siblings, 1 reply; 11+ messages in thread From: Heinrich Schuchardt @ 2021-06-03 16:09 UTC (permalink / raw) To: Andre Przywara Cc: Ramon Fried, Joe Hershberger, Jagan Teki, U-Boot Mailing List, Andreas Rehn On 6/3/21 1:04 PM, Andre Przywara wrote: > On Thu, 3 Jun 2021 12:20:34 +0200 > Heinrich Schuchardt <xypron.glpk@gmx.de> wrote: > > Hi, > >> On 6/3/21 11:04 AM, Andre Przywara wrote: >>> On Thu, 3 Jun 2021 09:46:48 +0200 >>> Heinrich Schuchardt <xypron.glpk@gmx.de> wrote: >>> >>> Hi Heinrich, >>> >>>> On 6/2/21 3:08 PM, Ramon Fried wrote: >>>>> On Tue, Jun 1, 2021 at 12:35 AM Heinrich Schuchardt <xypron.glpk@gmx.de> wrote: >>>>>> >>>>>> Dear all, >>>>>> >>>>>> network is broken in U-Boot on orangepi_pc_defconfig: >>> >>> Thanks for the report! >>> >>>>>> >>>>>> U-Boot 2021.07-rc3-00059-gd8729a114e (May 31 2021 - 21:26:56 +0000) >>>>>> Allwinner Technology >>>>>> eth0: ethernet@1c30000 >>>>>> => dhcp >>>>>> sun8i_emac_eth_start: Timeout >>>>>> >>>>>> Best regards >>>>>> >>>>>> Heinrich >>>>>> >>>>> Hi Heinrich, I don't have OrangePi. can you bisect and tell me when it broke ? >>>>> Thanks. >>>>> Ramon. >>>>> >>>> >>>> Git bisect points to: >>>> >>>> commit 4f0278dac56a658ef1e0967fec0bb95372a875bd >>>> Author: Andre Przywara <andre.przywara@arm.com> >>>> Date: Mon Jul 6 01:40:45 2020 +0100 >>>> >>>> net: sun8i-emac: Lower MDIO frequency >>>> >>>> Reverting the patch solves the problem for the OrangePi PC. >>>> >>>> According to the commit message the change was only needed for needed >>>> for external PHYs. >>> >>> The external PHY on the Pine64 (non-plus) was the trigger, however >>> both the manual and the Linux driver point to that we definitely need a >>> higher divider. From what I can see, AHB2 (the EMAC clock) runs at 200 >>> MHz (AHB2=AHB1/1=PLL6/3=200 MHz). So just having "/ 16" results in 12.5 >>> MHz MDIO frequency. Can you check whether any other divider values fix >>> this for you as well? >> >> MDIO_CMD_MII_CLK_CSR_DIV_16 = 0 and this is the value that was used >> before your patch. >> >> MDIO_CMD_MII_CLK_CSR_DIV_16 = 0 => >> Waiting for PHY auto negotiation to complete. done >> MDIO_CMD_MII_CLK_CSR_DIV_32 = 1 => sun8i_emac_eth_start: Timeout >> MDIO_CMD_MII_CLK_CSR_DIV_64 = 2 => sun8i_emac_eth_start: Timeout >> MDIO_CMD_MII_CLK_CSR_DIV_128 = 3 => sun8i_emac_eth_start: Timeout >> >> What is wrong about the approach in >> >> [PATCH 1/1] net: sun8i-emac: fix MDIO frequency >> https://lists.denx.de/pipermail/u-boot/2021-June/451305.html ? > > The MDIO spec says that the maximum frequency on the MDIO bus should be > 2.5 MHz. On the H3 with 200 MHz AHB and with a divider of 16 it's 12.5 The dts says for the MDIO: int_mii_phy: ethernet-phy@1 { clocks = <&ccu CLK_BUS_EPHY>; "ahb" refers to CLK_BUS_SPI1: spi1: spi@1c69000 { clocks = <&ccu CLK_BUS_SPI1>, <&ccu CLK_SPI1>; clock-names = "ahb", "mod"; Why are you mentioning AHB? > MHz. Apparently the internal H3 PHY can tolerate those high > frequencies, but it's beyond the spec. And certainly it should not fail > with lower frequencies. And indeed it works for me on the H2+ (which I > understand is just a binned version of the H3). > >> The Linux 5.10 driver runs fine no matter what value we choose for the >> divider in U-Boot. > > Because it programs the divider correctly: > https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/tree/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c#n316 > I take it you have no problems with Linux, so the divider being too > high cannot be the root cause of the problem. Function stmmac_clk_csr_set() depends on the rate of the clock named "stmmaceth": ethernet@1c30000 { clocks = <&ccu CLK_BUS_EMAC>; clock-names = "stmmaceth"; How do we get the frequency of this clock? Best regards Heinrich > > So I'd rather fix this problem properly and correctly, especially as it > seems to be more related to the EMAC soft reset (where your error > message comes from). > >> But I see a message: >> >> dwmac-sun8i 1c30000.ethernet: >> Current syscon value is not the default 148000 (expect 58000) >> >> @default_syscon_value: >> The default value of the EMAC register in syscon >> This value is used for disabling properly EMAC >> and used as a good starting value in case of the >> boot process(uboot) leave some stuff. > > Yeah, I never got the reason for this message. If Linux wants a > certain value, it should program that. Whatever was left by someone > else (be it U-Boot or some other software/OS) should not matter. > > Cheers, > Andre > >> >> Best regards >> >> Heinrich >> >>> >>>> Can't we let the change depend on priv->use_internal_phy? >>>> >>>> diff --git a/drivers/net/sun8i_emac.c b/drivers/net/sun8i_emac.c >>>> index 5a1b38bf80..d7553fe163 100644 >>>> --- a/drivers/net/sun8i_emac.c >>>> +++ b/drivers/net/sun8i_emac.c >>>> @@ -211,7 +211,9 @@ static int sun8i_mdio_read(struct mii_dev *bus, int >>>> addr, int devad, int reg) >>>> * The EMAC clock is either 200 or 300 MHz, so we need a divider >>>> * of 128 to get the MDIO frequency below the required 2.5 MHz. >>>> */ >>>> - mii_cmd |= MDIO_CMD_MII_CLK_CSR_DIV_128 << >>>> MDIO_CMD_MII_CLK_CSR_SHIFT; >>>> + if (!priv->use_internal_phy) >>>> + mii_cmd |= MDIO_CMD_MII_CLK_CSR_DIV_128 << >>>> + MDIO_CMD_MII_CLK_CSR_SHIFT; >>>> >>>> mii_cmd |= MDIO_CMD_MII_BUSY; >>>> >>>> @@ -242,7 +244,9 @@ static int sun8i_mdio_write(struct mii_dev *bus, int >>>> addr, int devad, int reg, >>>> * The EMAC clock is either 200 or 300 MHz, so we need a divider >>>> * of 128 to get the MDIO frequency below the required 2.5 MHz. >>>> */ >>>> - mii_cmd |= MDIO_CMD_MII_CLK_CSR_DIV_128 << >>>> MDIO_CMD_MII_CLK_CSR_SHIFT; >>>> + if (!priv->use_internal_phy) >>>> + mii_cmd |= MDIO_CMD_MII_CLK_CSR_DIV_128 << >>>> + MDIO_CMD_MII_CLK_CSR_SHIFT; >>>> >>>> mii_cmd |= MDIO_CMD_MII_WRITE; >>>> mii_cmd |= MDIO_CMD_MII_BUSY; >>>> >>>> Best regards >>>> >>>> Heinrich >>>> >>>> I would assume the problem hits all H3 boards. >>> >>> And that's the confusing part: it does not. I tested this on my >>> OrangePi Zero (H2+ with internal PHY), both back then with the original >>> MDIO frequency patch and also now after your report. It always worked >>> reliably for me. >>> Also: I am still puzzled how one influences the other: The error you >>> get is from the *MAC* soft reset: I would think this is an independent >>> operation from any communication attempts with the PHY. >>> >>> There is this thread here about the same symptom on a V3s: >>> https://lists.denx.de/pipermail/u-boot/2021-May/450315.html >>> v2 of this original patch (in the same thread) proposes some other >>> solution, which I am also not very happy with. But just to get some more >>> data points: can you check whether skipping the soft reset fixes this >>> for you? I will have a closer look tonight to check the order of soft >>> reset and PHY communication. Maybe we should only do the soft reset >>> *once* when the MAC probes, and not on every .start call? >>> >>> Thanks, >>> Andre >>> >> > ^ permalink raw reply [flat|nested] 11+ messages in thread
* Re: [BUG] network is broken on Orange Pi PC 2021-06-03 16:09 ` Heinrich Schuchardt @ 2021-06-03 16:57 ` Andre Przywara 2021-06-03 18:00 ` Andreas Rehn 2021-06-03 20:09 ` Heinrich Schuchardt 0 siblings, 2 replies; 11+ messages in thread From: Andre Przywara @ 2021-06-03 16:57 UTC (permalink / raw) To: Heinrich Schuchardt Cc: Ramon Fried, Joe Hershberger, Jagan Teki, U-Boot Mailing List, Andreas Rehn On Thu, 3 Jun 2021 18:09:25 +0200 Heinrich Schuchardt <xypron.glpk@gmx.de> wrote: Hi, > On 6/3/21 1:04 PM, Andre Przywara wrote: > > On Thu, 3 Jun 2021 12:20:34 +0200 > > Heinrich Schuchardt <xypron.glpk@gmx.de> wrote: > > > > Hi, > > > >> On 6/3/21 11:04 AM, Andre Przywara wrote: > >>> On Thu, 3 Jun 2021 09:46:48 +0200 > >>> Heinrich Schuchardt <xypron.glpk@gmx.de> wrote: > >>> > >>> Hi Heinrich, > >>> > >>>> On 6/2/21 3:08 PM, Ramon Fried wrote: > >>>>> On Tue, Jun 1, 2021 at 12:35 AM Heinrich Schuchardt <xypron.glpk@gmx.de> wrote: > >>>>>> > >>>>>> Dear all, > >>>>>> > >>>>>> network is broken in U-Boot on orangepi_pc_defconfig: > >>> > >>> Thanks for the report! > >>> > >>>>>> > >>>>>> U-Boot 2021.07-rc3-00059-gd8729a114e (May 31 2021 - 21:26:56 +0000) > >>>>>> Allwinner Technology > >>>>>> eth0: ethernet@1c30000 > >>>>>> => dhcp > >>>>>> sun8i_emac_eth_start: Timeout > >>>>>> > >>>>>> Best regards > >>>>>> > >>>>>> Heinrich > >>>>>> > >>>>> Hi Heinrich, I don't have OrangePi. can you bisect and tell me when it broke ? > >>>>> Thanks. > >>>>> Ramon. > >>>>> > >>>> > >>>> Git bisect points to: > >>>> > >>>> commit 4f0278dac56a658ef1e0967fec0bb95372a875bd > >>>> Author: Andre Przywara <andre.przywara@arm.com> > >>>> Date: Mon Jul 6 01:40:45 2020 +0100 > >>>> > >>>> net: sun8i-emac: Lower MDIO frequency > >>>> > >>>> Reverting the patch solves the problem for the OrangePi PC. > >>>> > >>>> According to the commit message the change was only needed for needed > >>>> for external PHYs. > >>> > >>> The external PHY on the Pine64 (non-plus) was the trigger, however > >>> both the manual and the Linux driver point to that we definitely need a > >>> higher divider. From what I can see, AHB2 (the EMAC clock) runs at 200 > >>> MHz (AHB2=AHB1/1=PLL6/3=200 MHz). So just having "/ 16" results in 12.5 > >>> MHz MDIO frequency. Can you check whether any other divider values fix > >>> this for you as well? > >> > >> MDIO_CMD_MII_CLK_CSR_DIV_16 = 0 and this is the value that was used > >> before your patch. > >> > >> MDIO_CMD_MII_CLK_CSR_DIV_16 = 0 => > >> Waiting for PHY auto negotiation to complete. done > >> MDIO_CMD_MII_CLK_CSR_DIV_32 = 1 => sun8i_emac_eth_start: Timeout > >> MDIO_CMD_MII_CLK_CSR_DIV_64 = 2 => sun8i_emac_eth_start: Timeout > >> MDIO_CMD_MII_CLK_CSR_DIV_128 = 3 => sun8i_emac_eth_start: Timeout > >> > >> What is wrong about the approach in > >> > >> [PATCH 1/1] net: sun8i-emac: fix MDIO frequency > >> https://lists.denx.de/pipermail/u-boot/2021-June/451305.html ? > > > > The MDIO spec says that the maximum frequency on the MDIO bus should be > > 2.5 MHz. On the H3 with 200 MHz AHB and with a divider of 16 it's 12.5 > > The dts says for the MDIO: > > int_mii_phy: ethernet-phy@1 { > clocks = <&ccu CLK_BUS_EPHY>; I think that is the clock to drive the PHY logic, not the MDIO bus. It's a gate for AHB1, in this case, which seems to be 200 MHz as well (because rate(AHB2)=rate(AHB1)/1). > "ahb" refers to CLK_BUS_SPI1: > > spi1: spi@1c69000 { > clocks = <&ccu CLK_BUS_SPI1>, <&ccu CLK_SPI1>; > clock-names = "ahb", "mod"; > > Why are you mentioning AHB? AHB stands for "Advanced High-performance Bus", which is a traditional term for a (faster, data centric) bus interface in the ARM bus world. I am not sure the exact term is actually correct anymore with recent bus implementations, but the H3 manual refers to AHB everywhere, in particular as the bus name for the EMAC IP (figure 4-1 System Bus Tree). Apparently the bus clock is used as the clock source for the MDIO bus as well - after dividing it. > > MHz. Apparently the internal H3 PHY can tolerate those high > > frequencies, but it's beyond the spec. And certainly it should not fail > > with lower frequencies. And indeed it works for me on the H2+ (which I > > understand is just a binned version of the H3). > > > >> The Linux 5.10 driver runs fine no matter what value we choose for the > >> divider in U-Boot. > > > > Because it programs the divider correctly: > > https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/tree/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c#n316 > > I take it you have no problems with Linux, so the divider being too > > high cannot be the root cause of the problem. > > Function stmmac_clk_csr_set() depends on the rate of the clock named > "stmmaceth": > > ethernet@1c30000 { > clocks = <&ccu CLK_BUS_EMAC>; > clock-names = "stmmaceth"; > > How do we get the frequency of this clock? Have you checked /sys/kernel/debug/clk/clk_summary? You could also insert some printk to be sure. Otherwise the definition of bus_emac_clk and CLK_BUS_EMAC in drivers/clk/sunxi-ng/ccu-sun8i-h3.c tell you that it's a gate for ahb2. All of those point to 200 MHz on my OPi Zero. Hope that helps! Cheers, Andre > > Best regards > > Heinrich > > > > > So I'd rather fix this problem properly and correctly, especially as it > > seems to be more related to the EMAC soft reset (where your error > > message comes from). > > > >> But I see a message: > >> > >> dwmac-sun8i 1c30000.ethernet: > >> Current syscon value is not the default 148000 (expect 58000) > >> > >> @default_syscon_value: > >> The default value of the EMAC register in syscon > >> This value is used for disabling properly EMAC > >> and used as a good starting value in case of the > >> boot process(uboot) leave some stuff. > > > > Yeah, I never got the reason for this message. If Linux wants a > > certain value, it should program that. Whatever was left by someone > > else (be it U-Boot or some other software/OS) should not matter. > > > > Cheers, > > Andre > > > >> > >> Best regards > >> > >> Heinrich > >> > >>> > >>>> Can't we let the change depend on priv->use_internal_phy? > >>>> > >>>> diff --git a/drivers/net/sun8i_emac.c b/drivers/net/sun8i_emac.c > >>>> index 5a1b38bf80..d7553fe163 100644 > >>>> --- a/drivers/net/sun8i_emac.c > >>>> +++ b/drivers/net/sun8i_emac.c > >>>> @@ -211,7 +211,9 @@ static int sun8i_mdio_read(struct mii_dev *bus, int > >>>> addr, int devad, int reg) > >>>> * The EMAC clock is either 200 or 300 MHz, so we need a divider > >>>> * of 128 to get the MDIO frequency below the required 2.5 MHz. > >>>> */ > >>>> - mii_cmd |= MDIO_CMD_MII_CLK_CSR_DIV_128 << > >>>> MDIO_CMD_MII_CLK_CSR_SHIFT; > >>>> + if (!priv->use_internal_phy) > >>>> + mii_cmd |= MDIO_CMD_MII_CLK_CSR_DIV_128 << > >>>> + MDIO_CMD_MII_CLK_CSR_SHIFT; > >>>> > >>>> mii_cmd |= MDIO_CMD_MII_BUSY; > >>>> > >>>> @@ -242,7 +244,9 @@ static int sun8i_mdio_write(struct mii_dev *bus, int > >>>> addr, int devad, int reg, > >>>> * The EMAC clock is either 200 or 300 MHz, so we need a divider > >>>> * of 128 to get the MDIO frequency below the required 2.5 MHz. > >>>> */ > >>>> - mii_cmd |= MDIO_CMD_MII_CLK_CSR_DIV_128 << > >>>> MDIO_CMD_MII_CLK_CSR_SHIFT; > >>>> + if (!priv->use_internal_phy) > >>>> + mii_cmd |= MDIO_CMD_MII_CLK_CSR_DIV_128 << > >>>> + MDIO_CMD_MII_CLK_CSR_SHIFT; > >>>> > >>>> mii_cmd |= MDIO_CMD_MII_WRITE; > >>>> mii_cmd |= MDIO_CMD_MII_BUSY; > >>>> > >>>> Best regards > >>>> > >>>> Heinrich > >>>> > >>>> I would assume the problem hits all H3 boards. > >>> > >>> And that's the confusing part: it does not. I tested this on my > >>> OrangePi Zero (H2+ with internal PHY), both back then with the original > >>> MDIO frequency patch and also now after your report. It always worked > >>> reliably for me. > >>> Also: I am still puzzled how one influences the other: The error you > >>> get is from the *MAC* soft reset: I would think this is an independent > >>> operation from any communication attempts with the PHY. > >>> > >>> There is this thread here about the same symptom on a V3s: > >>> https://lists.denx.de/pipermail/u-boot/2021-May/450315.html > >>> v2 of this original patch (in the same thread) proposes some other > >>> solution, which I am also not very happy with. But just to get some more > >>> data points: can you check whether skipping the soft reset fixes this > >>> for you? I will have a closer look tonight to check the order of soft > >>> reset and PHY communication. Maybe we should only do the soft reset > >>> *once* when the MAC probes, and not on every .start call? > >>> > >>> Thanks, > >>> Andre > >>> > >> > > > ^ permalink raw reply [flat|nested] 11+ messages in thread
* Re: [BUG] network is broken on Orange Pi PC 2021-06-03 16:57 ` Andre Przywara @ 2021-06-03 18:00 ` Andreas Rehn 2021-06-03 20:19 ` Heinrich Schuchardt 2021-06-03 20:09 ` Heinrich Schuchardt 1 sibling, 1 reply; 11+ messages in thread From: Andreas Rehn @ 2021-06-03 18:00 UTC (permalink / raw) To: Andre Przywara Cc: Heinrich Schuchardt, Ramon Fried, Joe Hershberger, Jagan Teki, U-Boot Mailing List Am Do., 3. Juni 2021 um 18:58 Uhr schrieb Andre Przywara < andre.przywara@arm.com>: > On Thu, 3 Jun 2021 18:09:25 +0200 > Heinrich Schuchardt <xypron.glpk@gmx.de> wrote: > > Hi, > > > On 6/3/21 1:04 PM, Andre Przywara wrote: > > > On Thu, 3 Jun 2021 12:20:34 +0200 > > > Heinrich Schuchardt <xypron.glpk@gmx.de> wrote: > > > > > > Hi, > > > > > >> On 6/3/21 11:04 AM, Andre Przywara wrote: > > >>> On Thu, 3 Jun 2021 09:46:48 +0200 > > >>> Heinrich Schuchardt <xypron.glpk@gmx.de> wrote: > > >>> > > >>> Hi Heinrich, > > >>> > > >>>> On 6/2/21 3:08 PM, Ramon Fried wrote: > > >>>>> On Tue, Jun 1, 2021 at 12:35 AM Heinrich Schuchardt < > xypron.glpk@gmx.de> wrote: > > >>>>>> > > >>>>>> Dear all, > > >>>>>> > > >>>>>> network is broken in U-Boot on orangepi_pc_defconfig: > > >>> > > >>> Thanks for the report! > > >>> > > >>>>>> > > >>>>>> U-Boot 2021.07-rc3-00059-gd8729a114e (May 31 2021 - 21:26:56 > +0000) > > >>>>>> Allwinner Technology > > >>>>>> eth0: ethernet@1c30000 > > >>>>>> => dhcp > > >>>>>> sun8i_emac_eth_start: Timeout > > >>>>>> > > >>>>>> Best regards > > >>>>>> > > >>>>>> Heinrich > > >>>>>> > > >>>>> Hi Heinrich, I don't have OrangePi. can you bisect and tell me > when it broke ? > > >>>>> Thanks. > > >>>>> Ramon. > > >>>>> > > >>>> > > >>>> Git bisect points to: > > >>>> > > >>>> commit 4f0278dac56a658ef1e0967fec0bb95372a875bd > > >>>> Author: Andre Przywara <andre.przywara@arm.com> > > >>>> Date: Mon Jul 6 01:40:45 2020 +0100 > > >>>> > > >>>> net: sun8i-emac: Lower MDIO frequency > > >>>> > > >>>> Reverting the patch solves the problem for the OrangePi PC. > > >>>> > > >>>> According to the commit message the change was only needed for > needed > > >>>> for external PHYs. > > >>> > > >>> The external PHY on the Pine64 (non-plus) was the trigger, however > > >>> both the manual and the Linux driver point to that we definitely > need a > > >>> higher divider. From what I can see, AHB2 (the EMAC clock) runs at > 200 > > >>> MHz (AHB2=AHB1/1=PLL6/3=200 MHz). So just having "/ 16" results in > 12.5 > > >>> MHz MDIO frequency. Can you check whether any other divider values > fix > > >>> this for you as well? > > >> > > >> MDIO_CMD_MII_CLK_CSR_DIV_16 = 0 and this is the value that was used > > >> before your patch. > > >> > > >> MDIO_CMD_MII_CLK_CSR_DIV_16 = 0 => > > >> Waiting for PHY auto negotiation to complete. done > > >> MDIO_CMD_MII_CLK_CSR_DIV_32 = 1 => sun8i_emac_eth_start: Timeout > > >> MDIO_CMD_MII_CLK_CSR_DIV_64 = 2 => sun8i_emac_eth_start: Timeout > > >> MDIO_CMD_MII_CLK_CSR_DIV_128 = 3 => sun8i_emac_eth_start: Timeout > > >> > > >> What is wrong about the approach in > > >> > > >> [PATCH 1/1] net: sun8i-emac: fix MDIO frequency > > >> https://lists.denx.de/pipermail/u-boot/2021-June/451305.html ? > > > > > > The MDIO spec says that the maximum frequency on the MDIO bus should be > > > 2.5 MHz. On the H3 with 200 MHz AHB and with a divider of 16 it's > 12.5 > > > > The dts says for the MDIO: > > > > int_mii_phy: ethernet-phy@1 { > > clocks = <&ccu CLK_BUS_EPHY>; > > I think that is the clock to drive the PHY logic, not the MDIO bus. > It's a gate for AHB1, in this case, which seems to be 200 MHz as well > (because rate(AHB2)=rate(AHB1)/1). > > > "ahb" refers to CLK_BUS_SPI1: > > > > spi1: spi@1c69000 { > > clocks = <&ccu CLK_BUS_SPI1>, <&ccu CLK_SPI1>; > > clock-names = "ahb", "mod"; > > > > Why are you mentioning AHB? > > AHB stands for "Advanced High-performance Bus", which is a traditional > term for a (faster, data centric) bus interface in the ARM > bus world. I am not sure the exact term is actually correct anymore > with recent bus implementations, but the H3 manual refers to AHB > everywhere, in particular as the bus name for the EMAC IP (figure 4-1 > System > Bus Tree). Apparently the bus clock is used as the clock source for the > MDIO bus as well - after dividing it. > > > > MHz. Apparently the internal H3 PHY can tolerate those high > > > frequencies, but it's beyond the spec. And certainly it should not fail > > > with lower frequencies. And indeed it works for me on the H2+ (which I > > > understand is just a binned version of the H3). > > > > > >> The Linux 5.10 driver runs fine no matter what value we choose for the > > >> divider in U-Boot. > > > > > > Because it programs the divider correctly: > > > > https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/tree/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c#n316 > > > I take it you have no problems with Linux, so the divider being too > > > high cannot be the root cause of the problem. > > > > Function stmmac_clk_csr_set() depends on the rate of the clock named > > "stmmaceth": > > > > ethernet@1c30000 { > > clocks = <&ccu CLK_BUS_EMAC>; > > clock-names = "stmmaceth"; > > > > How do we get the frequency of this clock? > > Have you checked /sys/kernel/debug/clk/clk_summary? You could also > insert some printk to be sure. Otherwise the definition of bus_emac_clk > and CLK_BUS_EMAC in drivers/clk/sunxi-ng/ccu-sun8i-h3.c tell you that > it's a gate for ahb2. All of those point to 200 MHz on my OPi Zero. > > Hope that helps! > > Cheers, > Andre > > > > Best regards > > > > Heinrich > > > > > > > > So I'd rather fix this problem properly and correctly, especially as it > > > seems to be more related to the EMAC soft reset (where your error > > > message comes from). > > > > > >> But I see a message: > > >> > > >> dwmac-sun8i 1c30000.ethernet: > > >> Current syscon value is not the default 148000 (expect 58000) > > >> > > >> @default_syscon_value: > > >> The default value of the EMAC register in syscon > > >> This value is used for disabling properly EMAC > > >> and used as a good starting value in case of the > > >> boot process(uboot) leave some stuff. > > > > > > Yeah, I never got the reason for this message. If Linux wants a > > > certain value, it should program that. Whatever was left by someone > > > else (be it U-Boot or some other software/OS) should not matter. > > > > > > Cheers, > > > Andre > > > > > >> > > >> Best regards > > >> > > >> Heinrich > > >> > > >>> > > >>>> Can't we let the change depend on priv->use_internal_phy? > > >>>> > > >>>> diff --git a/drivers/net/sun8i_emac.c b/drivers/net/sun8i_emac.c > > >>>> index 5a1b38bf80..d7553fe163 100644 > > >>>> --- a/drivers/net/sun8i_emac.c > > >>>> +++ b/drivers/net/sun8i_emac.c > > >>>> @@ -211,7 +211,9 @@ static int sun8i_mdio_read(struct mii_dev *bus, > int > > >>>> addr, int devad, int reg) > > >>>> * The EMAC clock is either 200 or 300 MHz, so we need a > divider > > >>>> * of 128 to get the MDIO frequency below the required > 2.5 MHz. > > >>>> */ > > >>>> - mii_cmd |= MDIO_CMD_MII_CLK_CSR_DIV_128 << > > >>>> MDIO_CMD_MII_CLK_CSR_SHIFT; > > >>>> + if (!priv->use_internal_phy) > > >>>> + mii_cmd |= MDIO_CMD_MII_CLK_CSR_DIV_128 << > > >>>> + MDIO_CMD_MII_CLK_CSR_SHIFT; > > >>>> > > >>>> mii_cmd |= MDIO_CMD_MII_BUSY; > > >>>> > > >>>> @@ -242,7 +244,9 @@ static int sun8i_mdio_write(struct mii_dev > *bus, int > > >>>> addr, int devad, int reg, > > >>>> * The EMAC clock is either 200 or 300 MHz, so we need a > divider > > >>>> * of 128 to get the MDIO frequency below the required > 2.5 MHz. > > >>>> */ > > >>>> - mii_cmd |= MDIO_CMD_MII_CLK_CSR_DIV_128 << > > >>>> MDIO_CMD_MII_CLK_CSR_SHIFT; > > >>>> + if (!priv->use_internal_phy) > > >>>> + mii_cmd |= MDIO_CMD_MII_CLK_CSR_DIV_128 << > > >>>> + MDIO_CMD_MII_CLK_CSR_SHIFT; > > >>>> > > >>>> mii_cmd |= MDIO_CMD_MII_WRITE; > > >>>> mii_cmd |= MDIO_CMD_MII_BUSY; > I tried this with my v3s which has only an internal phy. u-boot wasn't able to establish a connection with any speed and duplex mode combination. All i get is `ethernet@1c30000 Waiting for PHY auto negotiation to complete......... TIMEOUT !` Do you work with the internal or external phy @Heinrich? Did you try the default u-boot with a different speed and duplex mode combination and have the same behavior? Greetings andreas > >>>> > > >>>> Best regards > > >>>> > > >>>> Heinrich > > >>>> > > >>>> I would assume the problem hits all H3 boards. > > >>> > > >>> And that's the confusing part: it does not. I tested this on my > > >>> OrangePi Zero (H2+ with internal PHY), both back then with the > original > > >>> MDIO frequency patch and also now after your report. It always worked > > >>> reliably for me. > > >>> Also: I am still puzzled how one influences the other: The error you > > >>> get is from the *MAC* soft reset: I would think this is an > independent > > >>> operation from any communication attempts with the PHY. > > >>> > > >>> There is this thread here about the same symptom on a V3s: > > >>> https://lists.denx.de/pipermail/u-boot/2021-May/450315.html > > >>> v2 of this original patch (in the same thread) proposes some other > > >>> solution, which I am also not very happy with. But just to get some > more > > >>> data points: can you check whether skipping the soft reset fixes this > > >>> for you? I will have a closer look tonight to check the order of soft > > >>> reset and PHY communication. Maybe we should only do the soft reset > > >>> *once* when the MAC probes, and not on every .start call? > > >>> > > >>> Thanks, > > >>> Andre > > >>> > > >> > > > > > > > -- Mit freundlichen Grüßen / kind regards Andreas Rehn | Master of Engineering (M.Eng) ^ permalink raw reply [flat|nested] 11+ messages in thread
* Re: [BUG] network is broken on Orange Pi PC 2021-06-03 18:00 ` Andreas Rehn @ 2021-06-03 20:19 ` Heinrich Schuchardt 0 siblings, 0 replies; 11+ messages in thread From: Heinrich Schuchardt @ 2021-06-03 20:19 UTC (permalink / raw) To: Andreas Rehn, Andre Przywara Cc: Ramon Fried, Joe Hershberger, Jagan Teki, U-Boot Mailing List On 6/3/21 8:00 PM, Andreas Rehn wrote: > > > Am Do., 3. Juni 2021 um 18:58 Uhr schrieb Andre Przywara > <andre.przywara@arm.com <mailto:andre.przywara@arm.com>>: > > On Thu, 3 Jun 2021 18:09:25 +0200 > Heinrich Schuchardt <xypron.glpk@gmx.de <mailto:xypron.glpk@gmx.de>> > wrote: > > Hi, > > > On 6/3/21 1:04 PM, Andre Przywara wrote: > > > On Thu, 3 Jun 2021 12:20:34 +0200 > > > Heinrich Schuchardt <xypron.glpk@gmx.de > <mailto:xypron.glpk@gmx.de>> wrote: > > > > > > Hi, > > > > > >> On 6/3/21 11:04 AM, Andre Przywara wrote: > > >>> On Thu, 3 Jun 2021 09:46:48 +0200 > > >>> Heinrich Schuchardt <xypron.glpk@gmx.de > <mailto:xypron.glpk@gmx.de>> wrote: > > >>> > > >>> Hi Heinrich, > > >>> > > >>>> On 6/2/21 3:08 PM, Ramon Fried wrote: > > >>>>> On Tue, Jun 1, 2021 at 12:35 AM Heinrich Schuchardt > <xypron.glpk@gmx.de <mailto:xypron.glpk@gmx.de>> wrote: > > >>>>>> > > >>>>>> Dear all, > > >>>>>> > > >>>>>> network is broken in U-Boot on orangepi_pc_defconfig: > > >>> > > >>> Thanks for the report! > > >>> > > >>>>>> > > >>>>>> U-Boot 2021.07-rc3-00059-gd8729a114e (May 31 2021 - > 21:26:56 +0000) > > >>>>>> Allwinner Technology > > >>>>>> eth0: ethernet@1c30000 > > >>>>>> => dhcp > > >>>>>> sun8i_emac_eth_start: Timeout > > >>>>>> > > >>>>>> Best regards > > >>>>>> > > >>>>>> Heinrich > > >>>>>> > > >>>>> Hi Heinrich, I don't have OrangePi. can you bisect and tell > me when it broke ? > > >>>>> Thanks. > > >>>>> Ramon. > > >>>>> > > >>>> > > >>>> Git bisect points to: > > >>>> > > >>>> commit 4f0278dac56a658ef1e0967fec0bb95372a875bd > > >>>> Author: Andre Przywara <andre.przywara@arm.com > <mailto:andre.przywara@arm.com>> > > >>>> Date: Mon Jul 6 01:40:45 2020 +0100 > > >>>> > > >>>> net: sun8i-emac: Lower MDIO frequency > > >>>> > > >>>> Reverting the patch solves the problem for the OrangePi PC. > > >>>> > > >>>> According to the commit message the change was only needed > for needed > > >>>> for external PHYs. > > >>> > > >>> The external PHY on the Pine64 (non-plus) was the trigger, > however > > >>> both the manual and the Linux driver point to that we > definitely need a > > >>> higher divider. From what I can see, AHB2 (the EMAC clock) > runs at 200 > > >>> MHz (AHB2=AHB1/1=PLL6/3=200 MHz). So just having "/ 16" > results in 12.5 > > >>> MHz MDIO frequency. Can you check whether any other divider > values fix > > >>> this for you as well? > > >> > > >> MDIO_CMD_MII_CLK_CSR_DIV_16 = 0 and this is the value that was > used > > >> before your patch. > > >> > > >> MDIO_CMD_MII_CLK_CSR_DIV_16 = 0 => > > >> Waiting for PHY auto negotiation to complete. done > > >> MDIO_CMD_MII_CLK_CSR_DIV_32 = 1 => sun8i_emac_eth_start: Timeout > > >> MDIO_CMD_MII_CLK_CSR_DIV_64 = 2 => sun8i_emac_eth_start: Timeout > > >> MDIO_CMD_MII_CLK_CSR_DIV_128 = 3 => sun8i_emac_eth_start: Timeout > > >> > > >> What is wrong about the approach in > > >> > > >> [PATCH 1/1] net: sun8i-emac: fix MDIO frequency > > >> https://lists.denx.de/pipermail/u-boot/2021-June/451305.html > <https://lists.denx.de/pipermail/u-boot/2021-June/451305.html> ? > > > > > > The MDIO spec says that the maximum frequency on the MDIO bus > should be > > > 2.5 MHz. On the H3 with 200 MHz AHB and with a divider of 16 > it's 12.5 > > > > The dts says for the MDIO: > > > > int_mii_phy: ethernet-phy@1 { > > clocks = <&ccu CLK_BUS_EPHY>; > > I think that is the clock to drive the PHY logic, not the MDIO bus. > It's a gate for AHB1, in this case, which seems to be 200 MHz as well > (because rate(AHB2)=rate(AHB1)/1). > > > "ahb" refers to CLK_BUS_SPI1: > > > > spi1: spi@1c69000 { > > clocks = <&ccu CLK_BUS_SPI1>, <&ccu CLK_SPI1>; > > clock-names = "ahb", "mod"; > > > > Why are you mentioning AHB? > > AHB stands for "Advanced High-performance Bus", which is a traditional > term for a (faster, data centric) bus interface in the ARM > bus world. I am not sure the exact term is actually correct anymore > with recent bus implementations, but the H3 manual refers to AHB > everywhere, in particular as the bus name for the EMAC IP (figure > 4-1 System > Bus Tree). Apparently the bus clock is used as the clock source for the > MDIO bus as well - after dividing it. > > > > MHz. Apparently the internal H3 PHY can tolerate those high > > > frequencies, but it's beyond the spec. And certainly it should > not fail > > > with lower frequencies. And indeed it works for me on the H2+ > (which I > > > understand is just a binned version of the H3). > > > > > >> The Linux 5.10 driver runs fine no matter what value we choose > for the > > >> divider in U-Boot. > > > > > > Because it programs the divider correctly: > > > > https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/tree/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c#n316 > <https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/tree/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c#n316> > > > I take it you have no problems with Linux, so the divider being too > > > high cannot be the root cause of the problem. > > > > Function stmmac_clk_csr_set() depends on the rate of the clock named > > "stmmaceth": > > > > ethernet@1c30000 { > > clocks = <&ccu CLK_BUS_EMAC>; > > clock-names = "stmmaceth"; > > > > How do we get the frequency of this clock? > > Have you checked /sys/kernel/debug/clk/clk_summary? You could also > insert some printk to be sure. Otherwise the definition of bus_emac_clk > and CLK_BUS_EMAC in drivers/clk/sunxi-ng/ccu-sun8i-h3.c tell you that > it's a gate for ahb2. All of those point to 200 MHz on my OPi Zero. > > Hope that helps! > > Cheers, > Andre > > > > Best regards > > > > Heinrich > > > > > > > > So I'd rather fix this problem properly and correctly, > especially as it > > > seems to be more related to the EMAC soft reset (where your error > > > message comes from). > > > > > >> But I see a message: > > >> > > >> dwmac-sun8i 1c30000.ethernet: > > >> Current syscon value is not the default 148000 (expect 58000) > > >> > > >> @default_syscon_value: > > >> The default value of the EMAC register in syscon > > >> This value is used for disabling properly EMAC > > >> and used as a good starting value in case of the > > >> boot process(uboot) leave some stuff. > > > > > > Yeah, I never got the reason for this message. If Linux wants a > > > certain value, it should program that. Whatever was left by someone > > > else (be it U-Boot or some other software/OS) should not matter. > > > > > > Cheers, > > > Andre > > > > > >> > > >> Best regards > > >> > > >> Heinrich > > >> > > >>> > > >>>> Can't we let the change depend on priv->use_internal_phy? > > >>>> > > >>>> diff --git a/drivers/net/sun8i_emac.c b/drivers/net/sun8i_emac.c > > >>>> index 5a1b38bf80..d7553fe163 100644 > > >>>> --- a/drivers/net/sun8i_emac.c > > >>>> +++ b/drivers/net/sun8i_emac.c > > >>>> @@ -211,7 +211,9 @@ static int sun8i_mdio_read(struct > mii_dev *bus, int > > >>>> addr, int devad, int reg) > > >>>> * The EMAC clock is either 200 or 300 MHz, so we > need a divider > > >>>> * of 128 to get the MDIO frequency below the > required 2.5 MHz. > > >>>> */ > > >>>> - mii_cmd |= MDIO_CMD_MII_CLK_CSR_DIV_128 << > > >>>> MDIO_CMD_MII_CLK_CSR_SHIFT; > > >>>> + if (!priv->use_internal_phy) > > >>>> + mii_cmd |= MDIO_CMD_MII_CLK_CSR_DIV_128 << > > >>>> + MDIO_CMD_MII_CLK_CSR_SHIFT; > > >>>> > > >>>> mii_cmd |= MDIO_CMD_MII_BUSY; > > >>>> > > >>>> @@ -242,7 +244,9 @@ static int sun8i_mdio_write(struct > mii_dev *bus, int > > >>>> addr, int devad, int reg, > > >>>> * The EMAC clock is either 200 or 300 MHz, so we > need a divider > > >>>> * of 128 to get the MDIO frequency below the > required 2.5 MHz. > > >>>> */ > > >>>> - mii_cmd |= MDIO_CMD_MII_CLK_CSR_DIV_128 << > > >>>> MDIO_CMD_MII_CLK_CSR_SHIFT; > > >>>> + if (!priv->use_internal_phy) > > >>>> + mii_cmd |= MDIO_CMD_MII_CLK_CSR_DIV_128 << > > >>>> + MDIO_CMD_MII_CLK_CSR_SHIFT; > > >>>> > > >>>> mii_cmd |= MDIO_CMD_MII_WRITE; > > >>>> mii_cmd |= MDIO_CMD_MII_BUSY; > > > I tried this with my v3s which has only an internal phy. > u-boot wasn't able to establish a connection with any speed and duplex > mode combination. > All i get is `ethernet@1c30000 Waiting for PHY auto negotiation to > complete......... TIMEOUT !` > > Do you work with the internal or external phy @Heinrich? > Did you try the default u-boot with a different speed and duplex mode > combination and have the same behavior? > Greetings andreas I simply use orangepi_pc_defconfig. It worked out of the box in the previous release. Communication speed and duplex mode should be auto-negotiated. Best regards Heinrich > > > >>>> > > >>>> Best regards > > >>>> > > >>>> Heinrich > > >>>> > > >>>> I would assume the problem hits all H3 boards. > > >>> > > >>> And that's the confusing part: it does not. I tested this on my > > >>> OrangePi Zero (H2+ with internal PHY), both back then with > the original > > >>> MDIO frequency patch and also now after your report. It > always worked > > >>> reliably for me. > > >>> Also: I am still puzzled how one influences the other: The > error you > > >>> get is from the *MAC* soft reset: I would think this is an > independent > > >>> operation from any communication attempts with the PHY. > > >>> > > >>> There is this thread here about the same symptom on a V3s: > > >>> https://lists.denx.de/pipermail/u-boot/2021-May/450315.html > <https://lists.denx.de/pipermail/u-boot/2021-May/450315.html> > > >>> v2 of this original patch (in the same thread) proposes some > other > > >>> solution, which I am also not very happy with. But just to > get some more > > >>> data points: can you check whether skipping the soft reset > fixes this > > >>> for you? I will have a closer look tonight to check the order > of soft > > >>> reset and PHY communication. Maybe we should only do the soft > reset > > >>> *once* when the MAC probes, and not on every .start call? > > >>> > > >>> Thanks, > > >>> Andre > > >>> > > >> > > > > > > > > > -- > Mit freundlichen Grüßen / kind regards > Andreas Rehn | Master of Engineering (M.Eng) ^ permalink raw reply [flat|nested] 11+ messages in thread
* Re: [BUG] network is broken on Orange Pi PC 2021-06-03 16:57 ` Andre Przywara 2021-06-03 18:00 ` Andreas Rehn @ 2021-06-03 20:09 ` Heinrich Schuchardt 1 sibling, 0 replies; 11+ messages in thread From: Heinrich Schuchardt @ 2021-06-03 20:09 UTC (permalink / raw) To: Andre Przywara Cc: Ramon Fried, Joe Hershberger, Jagan Teki, U-Boot Mailing List, Andreas Rehn [-- Attachment #1: Type: text/plain, Size: 9025 bytes --] On 6/3/21 6:57 PM, Andre Przywara wrote: > On Thu, 3 Jun 2021 18:09:25 +0200 > Heinrich Schuchardt <xypron.glpk@gmx.de> wrote: > > Hi, > >> On 6/3/21 1:04 PM, Andre Przywara wrote: >>> On Thu, 3 Jun 2021 12:20:34 +0200 >>> Heinrich Schuchardt <xypron.glpk@gmx.de> wrote: >>> >>> Hi, >>> >>>> On 6/3/21 11:04 AM, Andre Przywara wrote: >>>>> On Thu, 3 Jun 2021 09:46:48 +0200 >>>>> Heinrich Schuchardt <xypron.glpk@gmx.de> wrote: >>>>> >>>>> Hi Heinrich, >>>>> >>>>>> On 6/2/21 3:08 PM, Ramon Fried wrote: >>>>>>> On Tue, Jun 1, 2021 at 12:35 AM Heinrich Schuchardt <xypron.glpk@gmx.de> wrote: >>>>>>>> >>>>>>>> Dear all, >>>>>>>> >>>>>>>> network is broken in U-Boot on orangepi_pc_defconfig: >>>>> >>>>> Thanks for the report! >>>>> >>>>>>>> >>>>>>>> U-Boot 2021.07-rc3-00059-gd8729a114e (May 31 2021 - 21:26:56 +0000) >>>>>>>> Allwinner Technology >>>>>>>> eth0: ethernet@1c30000 >>>>>>>> => dhcp >>>>>>>> sun8i_emac_eth_start: Timeout >>>>>>>> >>>>>>>> Best regards >>>>>>>> >>>>>>>> Heinrich >>>>>>>> >>>>>>> Hi Heinrich, I don't have OrangePi. can you bisect and tell me when it broke ? >>>>>>> Thanks. >>>>>>> Ramon. >>>>>>> >>>>>> >>>>>> Git bisect points to: >>>>>> >>>>>> commit 4f0278dac56a658ef1e0967fec0bb95372a875bd >>>>>> Author: Andre Przywara <andre.przywara@arm.com> >>>>>> Date: Mon Jul 6 01:40:45 2020 +0100 >>>>>> >>>>>> net: sun8i-emac: Lower MDIO frequency >>>>>> >>>>>> Reverting the patch solves the problem for the OrangePi PC. >>>>>> >>>>>> According to the commit message the change was only needed for needed >>>>>> for external PHYs. >>>>> >>>>> The external PHY on the Pine64 (non-plus) was the trigger, however >>>>> both the manual and the Linux driver point to that we definitely need a >>>>> higher divider. From what I can see, AHB2 (the EMAC clock) runs at 200 >>>>> MHz (AHB2=AHB1/1=PLL6/3=200 MHz). So just having "/ 16" results in 12.5 >>>>> MHz MDIO frequency. Can you check whether any other divider values fix >>>>> this for you as well? >>>> >>>> MDIO_CMD_MII_CLK_CSR_DIV_16 = 0 and this is the value that was used >>>> before your patch. >>>> >>>> MDIO_CMD_MII_CLK_CSR_DIV_16 = 0 => >>>> Waiting for PHY auto negotiation to complete. done >>>> MDIO_CMD_MII_CLK_CSR_DIV_32 = 1 => sun8i_emac_eth_start: Timeout >>>> MDIO_CMD_MII_CLK_CSR_DIV_64 = 2 => sun8i_emac_eth_start: Timeout >>>> MDIO_CMD_MII_CLK_CSR_DIV_128 = 3 => sun8i_emac_eth_start: Timeout >>>> >>>> What is wrong about the approach in >>>> >>>> [PATCH 1/1] net: sun8i-emac: fix MDIO frequency >>>> https://lists.denx.de/pipermail/u-boot/2021-June/451305.html ? >>> >>> The MDIO spec says that the maximum frequency on the MDIO bus should be >>> 2.5 MHz. On the H3 with 200 MHz AHB and with a divider of 16 it's 12.5 >> >> The dts says for the MDIO: >> >> int_mii_phy: ethernet-phy@1 { >> clocks = <&ccu CLK_BUS_EPHY>; > > I think that is the clock to drive the PHY logic, not the MDIO bus. > It's a gate for AHB1, in this case, which seems to be 200 MHz as well > (because rate(AHB2)=rate(AHB1)/1). > >> "ahb" refers to CLK_BUS_SPI1: >> >> spi1: spi@1c69000 { >> clocks = <&ccu CLK_BUS_SPI1>, <&ccu CLK_SPI1>; >> clock-names = "ahb", "mod"; >> >> Why are you mentioning AHB? > > AHB stands for "Advanced High-performance Bus", which is a traditional > term for a (faster, data centric) bus interface in the ARM > bus world. I am not sure the exact term is actually correct anymore > with recent bus implementations, but the H3 manual refers to AHB > everywhere, in particular as the bus name for the EMAC IP (figure 4-1 System > Bus Tree). Apparently the bus clock is used as the clock source for the > MDIO bus as well - after dividing it. > >>> MHz. Apparently the internal H3 PHY can tolerate those high >>> frequencies, but it's beyond the spec. And certainly it should not fail >>> with lower frequencies. And indeed it works for me on the H2+ (which I >>> understand is just a binned version of the H3). >>> >>>> The Linux 5.10 driver runs fine no matter what value we choose for the >>>> divider in U-Boot. >>> >>> Because it programs the divider correctly: >>> https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/tree/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c#n316 >>> I take it you have no problems with Linux, so the divider being too >>> high cannot be the root cause of the problem. >> >> Function stmmac_clk_csr_set() depends on the rate of the clock named >> "stmmaceth": >> >> ethernet@1c30000 { >> clocks = <&ccu CLK_BUS_EMAC>; >> clock-names = "stmmaceth"; >> >> How do we get the frequency of this clock? > > Have you checked /sys/kernel/debug/clk/clk_summary? You could also > insert some printk to be sure. Otherwise the definition of bus_emac_clk > and CLK_BUS_EMAC in drivers/clk/sunxi-ng/ccu-sun8i-h3.c tell you that > it's a gate for ahb2. All of those point to 200 MHz on my OPi Zero. I have appended clk_summary. stmmac_clk_csr_set(): dwmac-sun8i 1c30000.ethernet: priv->plat->has_sun8i 1 dwmac-sun8i 1c30000.ethernet: clk_rate 200000000 dwmac-sun8i 1c30000.ethernet: priv->clk_csr 3 Best regards Heinrich > > Hope that helps! > > Cheers, > Andre >> >> Best regards >> >> Heinrich >> >>> >>> So I'd rather fix this problem properly and correctly, especially as it >>> seems to be more related to the EMAC soft reset (where your error >>> message comes from). >>> >>>> But I see a message: >>>> >>>> dwmac-sun8i 1c30000.ethernet: >>>> Current syscon value is not the default 148000 (expect 58000) >>>> >>>> @default_syscon_value: >>>> The default value of the EMAC register in syscon >>>> This value is used for disabling properly EMAC >>>> and used as a good starting value in case of the >>>> boot process(uboot) leave some stuff. >>> >>> Yeah, I never got the reason for this message. If Linux wants a >>> certain value, it should program that. Whatever was left by someone >>> else (be it U-Boot or some other software/OS) should not matter. >>> >>> Cheers, >>> Andre >>> >>>> >>>> Best regards >>>> >>>> Heinrich >>>> >>>>> >>>>>> Can't we let the change depend on priv->use_internal_phy? >>>>>> >>>>>> diff --git a/drivers/net/sun8i_emac.c b/drivers/net/sun8i_emac.c >>>>>> index 5a1b38bf80..d7553fe163 100644 >>>>>> --- a/drivers/net/sun8i_emac.c >>>>>> +++ b/drivers/net/sun8i_emac.c >>>>>> @@ -211,7 +211,9 @@ static int sun8i_mdio_read(struct mii_dev *bus, int >>>>>> addr, int devad, int reg) >>>>>> * The EMAC clock is either 200 or 300 MHz, so we need a divider >>>>>> * of 128 to get the MDIO frequency below the required 2.5 MHz. >>>>>> */ >>>>>> - mii_cmd |= MDIO_CMD_MII_CLK_CSR_DIV_128 << >>>>>> MDIO_CMD_MII_CLK_CSR_SHIFT; >>>>>> + if (!priv->use_internal_phy) >>>>>> + mii_cmd |= MDIO_CMD_MII_CLK_CSR_DIV_128 << >>>>>> + MDIO_CMD_MII_CLK_CSR_SHIFT; >>>>>> >>>>>> mii_cmd |= MDIO_CMD_MII_BUSY; >>>>>> >>>>>> @@ -242,7 +244,9 @@ static int sun8i_mdio_write(struct mii_dev *bus, int >>>>>> addr, int devad, int reg, >>>>>> * The EMAC clock is either 200 or 300 MHz, so we need a divider >>>>>> * of 128 to get the MDIO frequency below the required 2.5 MHz. >>>>>> */ >>>>>> - mii_cmd |= MDIO_CMD_MII_CLK_CSR_DIV_128 << >>>>>> MDIO_CMD_MII_CLK_CSR_SHIFT; >>>>>> + if (!priv->use_internal_phy) >>>>>> + mii_cmd |= MDIO_CMD_MII_CLK_CSR_DIV_128 << >>>>>> + MDIO_CMD_MII_CLK_CSR_SHIFT; >>>>>> >>>>>> mii_cmd |= MDIO_CMD_MII_WRITE; >>>>>> mii_cmd |= MDIO_CMD_MII_BUSY; >>>>>> >>>>>> Best regards >>>>>> >>>>>> Heinrich >>>>>> >>>>>> I would assume the problem hits all H3 boards. >>>>> >>>>> And that's the confusing part: it does not. I tested this on my >>>>> OrangePi Zero (H2+ with internal PHY), both back then with the original >>>>> MDIO frequency patch and also now after your report. It always worked >>>>> reliably for me. >>>>> Also: I am still puzzled how one influences the other: The error you >>>>> get is from the *MAC* soft reset: I would think this is an independent >>>>> operation from any communication attempts with the PHY. >>>>> >>>>> There is this thread here about the same symptom on a V3s: >>>>> https://lists.denx.de/pipermail/u-boot/2021-May/450315.html >>>>> v2 of this original patch (in the same thread) proposes some other >>>>> solution, which I am also not very happy with. But just to get some more >>>>> data points: can you check whether skipping the soft reset fixes this >>>>> for you? I will have a closer look tonight to check the order of soft >>>>> reset and PHY communication. Maybe we should only do the soft reset >>>>> *once* when the MAC probes, and not on every .start call? >>>>> >>>>> Thanks, >>>>> Andre >>>>> >>>> >>> >> > [-- Attachment #2: clk_summary --] [-- Type: text/plain, Size: 13442 bytes --] enable prepare protect duty clock count count count rate accuracy phase cycle --------------------------------------------------------------------------------------------- iosc 0 0 0 16000000 300000000 0 50000 ext_osc32k 1 1 0 32768 50000 0 50000 osc32k 1 1 0 32768 50000 0 50000 osc32k-out 0 0 0 32768 50000 0 50000 osc24M 18 18 0 24000000 50000 0 50000 ir 1 1 0 8000000 50000 0 50000 ar100 1 1 0 24000000 50000 0 50000 ahb0 1 1 0 24000000 50000 0 50000 apb0 3 3 0 24000000 50000 0 50000 apb0-twd 0 0 0 24000000 50000 0 50000 apb0-i2c 1 1 0 24000000 50000 0 50000 apb0-uart 0 0 0 24000000 50000 0 50000 apb0-timer 0 0 0 24000000 50000 0 50000 apb0-ir 1 1 0 24000000 50000 0 50000 apb0-pio 1 1 0 24000000 50000 0 50000 hdmi-ddc 2 2 0 24000000 50000 0 50000 avs 0 0 0 24000000 50000 0 50000 csi-mclk 0 0 0 24000000 50000 0 50000 csi-misc 0 0 0 24000000 50000 0 50000 usb-ohci3 1 1 0 24000000 50000 0 50000 usb-ohci2 1 1 0 24000000 50000 0 50000 usb-ohci1 1 1 0 24000000 50000 0 50000 usb-ohci0 1 1 0 24000000 50000 0 50000 usb-phy3 1 1 0 24000000 50000 0 50000 usb-phy2 1 1 0 24000000 50000 0 50000 usb-phy1 1 1 0 24000000 50000 0 50000 usb-phy0 1 1 0 24000000 50000 0 50000 spi1 0 0 0 24000000 50000 0 50000 spi0 0 0 0 24000000 50000 0 50000 ce 0 0 0 24000000 50000 0 50000 ts 0 0 0 24000000 50000 0 50000 mmc2 0 0 0 24000000 50000 0 50000 mmc2_output 0 0 0 24000000 50000 180 50000 mmc2_sample 0 0 0 24000000 50000 180 50000 mmc1 0 0 0 24000000 50000 0 50000 mmc1_output 0 0 0 24000000 50000 180 50000 mmc1_sample 0 0 0 24000000 50000 180 50000 nand 0 0 0 24000000 50000 0 50000 ths 0 0 0 24000000 50000 0 50000 apb2 1 1 0 24000000 50000 0 50000 bus-scr0 0 0 0 24000000 50000 0 50000 bus-uart3 0 0 0 24000000 50000 0 50000 bus-uart2 0 0 0 24000000 50000 0 50000 bus-uart1 0 0 0 24000000 50000 0 50000 bus-uart0 1 1 0 24000000 50000 0 50000 bus-i2c2 0 0 0 24000000 50000 0 50000 bus-i2c1 0 0 0 24000000 50000 0 50000 bus-i2c0 0 0 0 24000000 50000 0 50000 pll-de 1 1 0 432000000 50000 0 50000 de 2 2 0 432000000 50000 0 50000 wb-div 0 0 0 432000000 50000 0 50000 wb 0 0 0 432000000 50000 0 50000 mixer1-div 0 0 0 432000000 50000 0 50000 mixer1 0 0 0 432000000 50000 0 50000 mixer0-div 1 1 0 432000000 50000 0 50000 mixer0 1 1 0 432000000 50000 0 50000 tve 0 0 0 432000000 50000 0 50000 pll-periph1 0 0 0 600000000 50000 0 50000 pll-gpu 0 0 0 384000000 50000 0 50000 gpu 0 0 0 384000000 50000 0 50000 pll-periph0 3 3 0 600000000 50000 0 50000 mmc0 3 3 0 50000000 50000 0 50000 mmc0_output 1 1 0 50000000 50000 90 50000 mmc0_sample 1 1 0 50000000 50000 120 50000 csi-sclk 0 0 0 600000000 50000 0 50000 deinterlace 0 0 0 600000000 50000 0 50000 ahb1 11 11 0 200000000 50000 0 50000 bus-dbg 0 0 0 200000000 50000 0 50000 bus-ephy 1 1 0 200000000 50000 0 50000 bus-spinlock 0 0 0 200000000 50000 0 50000 bus-msgbox 0 0 0 200000000 50000 0 50000 bus-gpu 0 0 0 200000000 50000 0 50000 bus-de 2 2 0 200000000 50000 0 50000 bus-wb 0 0 0 200000000 50000 0 50000 bus-mixer1 0 0 0 200000000 50000 0 50000 bus-mixer0 1 1 0 200000000 50000 0 50000 bus-hdmi 2 2 0 200000000 50000 0 50000 bus-tve 0 0 0 200000000 50000 0 50000 bus-csi 0 0 0 200000000 50000 0 50000 bus-deinterlace 0 0 0 200000000 50000 0 50000 bus-tcon1 0 0 0 200000000 50000 0 50000 bus-tcon0 1 1 0 200000000 50000 0 50000 bus-ve 0 0 0 200000000 50000 0 50000 bus-ohci0 2 2 0 200000000 50000 0 50000 bus-ehci0 2 2 0 200000000 50000 0 50000 bus-otg 1 1 0 200000000 50000 0 50000 bus-spi1 0 0 0 200000000 50000 0 50000 bus-spi0 0 0 0 200000000 50000 0 50000 bus-hstimer 0 0 0 200000000 50000 0 50000 bus-ts 0 0 0 200000000 50000 0 50000 bus-dram 0 0 0 200000000 50000 0 50000 bus-nand 0 0 0 200000000 50000 0 50000 bus-mmc2 0 0 0 200000000 50000 0 50000 bus-mmc1 0 0 0 200000000 50000 0 50000 bus-mmc0 1 1 0 200000000 50000 0 50000 bus-dma 1 1 0 200000000 50000 0 50000 bus-ce 0 0 0 200000000 50000 0 50000 ahb2 7 7 0 200000000 50000 0 50000 bus-ohci3 2 2 0 200000000 50000 0 50000 bus-ohci2 2 2 0 200000000 50000 0 50000 bus-ohci1 2 2 0 200000000 50000 0 50000 bus-ehci3 2 2 0 200000000 50000 0 50000 bus-ehci2 2 2 0 200000000 50000 0 50000 bus-ehci1 2 2 0 200000000 50000 0 50000 bus-emac 2 2 0 200000000 50000 0 50000 apb1 2 2 0 100000000 50000 0 50000 bus-i2s2 0 0 0 100000000 50000 0 50000 bus-i2s1 0 0 0 100000000 50000 0 50000 bus-i2s0 0 0 0 100000000 50000 0 50000 bus-ths 0 0 0 100000000 50000 0 50000 bus-pio 1 1 0 100000000 50000 0 50000 bus-spdif 0 0 0 100000000 50000 0 50000 bus-codec 1 1 0 100000000 50000 0 50000 pll-periph0-2x 1 1 0 1200000000 50000 0 50000 mbus 1 1 0 300000000 50000 0 50000 pll-ddr 1 1 0 1248000000 50000 0 50000 dram 1 1 0 1248000000 50000 0 50000 dram-ts 0 0 0 1248000000 50000 0 50000 dram-deinterlace 0 0 0 1248000000 50000 0 50000 dram-csi 0 0 0 1248000000 50000 0 50000 dram-ve 0 0 0 1248000000 50000 0 50000 pll-ve 0 0 0 402000000 50000 0 50000 ve 0 0 0 402000000 50000 0 50000 pll-video 2 2 0 294000000 50000 0 50000 hdmi-phy-clk 1 1 0 73500000 50000 0 50000 hdmi 1 1 0 294000000 50000 0 50000 tcon 0 0 0 294000000 50000 0 50000 pll-audio-base 0 0 0 98285714 50000 0 50000 pll-audio-8x 0 0 0 196571428 50000 0 50000 i2s2 0 0 0 196571428 50000 0 50000 i2s1 0 0 0 196571428 50000 0 50000 i2s0 0 0 0 196571428 50000 0 50000 pll-audio-4x 0 0 0 98285714 50000 0 50000 pll-audio-2x 0 0 0 49142857 50000 0 50000 pll-audio 0 0 0 98285714 50000 0 50000 ac-dig 0 0 0 98285714 50000 0 50000 spdif 0 0 0 98285714 50000 0 50000 pll-cpux 1 1 0 648000000 50000 0 50000 cpux 1 1 0 648000000 50000 0 50000 axi 0 0 0 216000000 50000 0 50000 ^ permalink raw reply [flat|nested] 11+ messages in thread
end of thread, other threads:[~2021-06-03 20:19 UTC | newest] Thread overview: 11+ messages (download: mbox.gz / follow: Atom feed) -- links below jump to the message on this page -- 2021-05-31 21:35 [BUG] network is broken on Orange Pi PC Heinrich Schuchardt 2021-06-02 13:08 ` Ramon Fried 2021-06-03 7:46 ` Heinrich Schuchardt 2021-06-03 9:04 ` Andre Przywara 2021-06-03 10:20 ` Heinrich Schuchardt 2021-06-03 11:04 ` Andre Przywara 2021-06-03 16:09 ` Heinrich Schuchardt 2021-06-03 16:57 ` Andre Przywara 2021-06-03 18:00 ` Andreas Rehn 2021-06-03 20:19 ` Heinrich Schuchardt 2021-06-03 20:09 ` Heinrich Schuchardt
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.