From mboxrd@z Thu Jan 1 00:00:00 1970 From: Maxim Levitsky Subject: Re: [ath5k-devel] Bugs on aspire one A150 Date: Mon, 01 Dec 2008 17:33:15 +0200 Message-ID: <1228145595.16647.6.camel__25551.6152632937$1228145781$gmane$org@maxim-laptop> References: <491506DB.1070000@gmail.com> <4918A8C5.3050607@gmail.com> <40f31dec0811101412n1a4faf86sf4b1f37bb41caef9@mail.gmail.com> Mime-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit Return-path: In-Reply-To: <40f31dec0811101412n1a4faf86sf4b1f37bb41caef9@mail.gmail.com> List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Sender: linux-pm-bounces@lists.linux-foundation.org Errors-To: linux-pm-bounces@lists.linux-foundation.org To: Nick Kossifidis Cc: linux-pm@lists.linux-foundation.org, Bob Copeland , linux-kernel@vger.kernel.org, alsa-devel@alsa-project.org, ath5k-devel@venema.h4ckr.net List-Id: linux-pm@vger.kernel.org On Tue, 2008-11-11 at 00:12 +0200, Nick Kossifidis wrote: > 2008/11/10 Maxim Levitsky : > > Bob Copeland wrote: > >> On Fri, Nov 7, 2008 at 10:26 PM, Maxim Levitsky wrote: > >>> ** 2 - wireless: not to mention the fact that ath5k wasn't installed by > >>> default in ubuntu... > >>> wireless more or less works, but kernel log is full of backtraces. > >> > >> As you've seen, these should at least be gone now... > >> > >>> Was able to connect to my WPA2 access point. > >>> Sometimes wireless fails completely, especially after suspend to ram. > >> > >> Did you get noise calibration failures in dmesg at this point? Felix posted > >> a patch recently that handles them better. > > Yep, but they seems to be gone in latest -git too. > > Wireless work fine now, it seems like my iwl3945. > > > >> > >>> Advanced features like monitor/injection work, but when I changed the card's > >>> mac address it stopped working. > >>> I also noticed that if I then start airodump, then wireless works with new > >>> mac. > > Why it doesn't accept new mac?, can this be fixed? > > > > > >> > >>> ** 4 - wireless led doesn't work. > >>> ath5k devs, can you fix this? > >> > >> Currently all the LED code we have in there is for setting a particular gpio > >> for particular laptops (and they differ between models). We only have quirks > >> for IBM and HP, none for Acer. Also, the legacy-hal seems to have a different > >> strategy for 2425 chips. I can try to hack up some code for you to test. > >> > > > > I have seen on the web that madwifi did support the led with some gpio settings > > > > sysctl -w dev.wifi0.ledpin=3 > > sysctl -w dev.wifi0.softled=1 > > > > from https://help.ubuntu.com/community/AspireOne > > > > Best regards, > > Maxim Levitsky > > i think that some led settings are stored on EEPROM, let me check it out... Hi, Any update on that? Best regards, Maxim Levitsky > >