From: Mike Frysinger <vapier@gentoo.org>
To: u-boot@lists.denx.de
Subject: [U-Boot] [PATCH 22/27] Blackfin: add port I bits
Date: Wed, 28 Jan 2009 19:03:31 -0500 [thread overview]
Message-ID: <1233187416-22378-23-git-send-email-vapier@gentoo.org> (raw)
In-Reply-To: <1233187416-22378-1-git-send-email-vapier@gentoo.org>
Some people need to access port I, so make sure the pins are defined.
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
---
include/asm-blackfin/mach-bf548/ports.h | 20 +++++++++++++++++++-
1 files changed, 19 insertions(+), 1 deletions(-)
diff --git a/include/asm-blackfin/mach-bf548/ports.h b/include/asm-blackfin/mach-bf548/ports.h
index c828516..5f0e45e 100644
--- a/include/asm-blackfin/mach-bf548/ports.h
+++ b/include/asm-blackfin/mach-bf548/ports.h
@@ -236,7 +236,25 @@
#define PH14 0x4000
#define PH15 0x8000
-/* Port J Masks */
+/* Port I Masks */
+#define PI0 0x0001
+#define PI1 0x0002
+#define PI2 0x0004
+#define PI3 0x0008
+#define PI4 0x0010
+#define PI5 0x0020
+#define PI6 0x0040
+#define PI7 0x0080
+#define PI8 0x0100
+#define PI9 0x0200
+#define PI10 0x0400
+#define PI11 0x0800
+#define PI12 0x1000
+#define PI13 0x2000
+#define PI14 0x4000
+#define PI15 0x8000
+
+/* Port I Masks */
#define PJ0 0x0001
#define PJ1 0x0002
#define PJ2 0x0004
--
1.6.1.1
next prev parent reply other threads:[~2009-01-29 0:03 UTC|newest]
Thread overview: 73+ messages / expand[flat|nested] mbox.gz Atom feed top
2009-01-29 0:03 [U-Boot] [PATCH 00/27] Blackfin updates for 2009.03 (part 2) Mike Frysinger
2009-01-29 0:03 ` [U-Boot] [PATCH 01/27] Blackfin: bfin_mac: force board_get_enetaddr() usage Mike Frysinger
2009-01-29 5:43 ` Ben Warren
2009-01-29 5:53 ` Mike Frysinger
2009-01-29 6:01 ` Ben Warren
2009-01-29 6:16 ` Mike Frysinger
2009-01-29 6:20 ` Ben Warren
2009-01-29 10:43 ` Wolfgang Denk
2009-01-29 6:59 ` [U-Boot] [PATCH 01/27 v2] " Mike Frysinger
2009-01-29 7:53 ` Ben Warren
2009-01-29 10:45 ` Wolfgang Denk
2009-01-29 16:35 ` Mike Frysinger
2009-01-29 19:03 ` Wolfgang Denk
2009-01-29 20:25 ` Mike Frysinger
2009-01-29 20:41 ` Wolfgang Denk
2009-01-29 21:05 ` Mike Frysinger
2009-01-29 21:17 ` Wolfgang Denk
2009-01-29 21:48 ` Mike Frysinger
2009-01-29 22:18 ` Wolfgang Denk
2009-01-30 1:23 ` Mike Frysinger
2009-02-02 20:05 ` Mike Frysinger
2009-02-02 21:04 ` Wolfgang Denk
2009-02-03 0:37 ` Mike Frysinger
2009-02-03 8:16 ` Wolfgang Denk
2009-02-03 19:40 ` Mike Frysinger
2009-02-10 20:36 ` Mike Frysinger
2009-02-11 5:45 ` Ben Warren
2009-02-11 5:57 ` Mike Frysinger
2009-02-11 12:17 ` Wolfgang Denk
2009-02-11 19:25 ` Mike Frysinger
2009-02-11 20:15 ` Ben Warren
2009-02-12 1:29 ` Mike Frysinger
2009-02-12 6:24 ` Ben Warren
2009-02-12 6:30 ` Mike Frysinger
2009-02-12 7:33 ` Wolfgang Denk
2009-02-12 7:57 ` Mike Frysinger
2009-01-30 0:59 ` [U-Boot] [PATCH] net: new utility functions eth_{parse, {get, set}env}_enetaddr() Mike Frysinger
2009-01-30 1:09 ` [U-Boot] [PATCH 01/27 v3] Blackfin: bfin_mac: force boards to setup the MAC themselves Mike Frysinger
2009-01-30 1:09 ` [U-Boot] [PATCH] Blackfin: bf537-stamp: rewrite MAC-in-flash handling Mike Frysinger
2009-01-29 17:49 ` [U-Boot] [PATCH 01/27] Blackfin: bfin_mac: force board_get_enetaddr() usage Scott Wood
2009-01-29 10:30 ` Wolfgang Denk
2009-01-29 0:03 ` [U-Boot] [PATCH 02/27] Blackfin: bfin_mac: set MDCDIV based on SCLK Mike Frysinger
2009-01-29 5:46 ` Ben Warren
2009-01-29 0:03 ` [U-Boot] [PATCH 03/27] Blackfin: bfin_mac: cleanup MII/PHY functions Mike Frysinger
2009-01-29 5:48 ` Ben Warren
2009-01-29 0:03 ` [U-Boot] [PATCH 04/27] Blackfin: bfin_mac: respect CONFIG_PHY_{ADDR, CLOCK_FREQ} Mike Frysinger
2009-01-29 5:50 ` Ben Warren
2009-01-29 0:03 ` [U-Boot] [PATCH 05/27] Blackfin: bfin_mac: use common debug() Mike Frysinger
2009-01-29 5:51 ` Ben Warren
2009-01-29 0:03 ` [U-Boot] [PATCH 06/27] Blackfin: bfin_mac: convert CONFIG_BFIN_MAC_RMII to CONFIG_RMII Mike Frysinger
2009-01-29 6:03 ` Ben Warren
2009-01-29 0:03 ` [U-Boot] [PATCH 07/27] Blackfin: bfin_mac: cleanup pointer/casts for aliasing issues Mike Frysinger
2009-01-29 6:05 ` Ben Warren
2009-01-29 0:03 ` [U-Boot] [PATCH 08/27] Blackfin: only build post code when CONFIG_POST Mike Frysinger
2009-01-29 0:03 ` [U-Boot] [PATCH 09/27] Blackfin: add driver for on-chip SPI controller Mike Frysinger
2009-01-29 0:03 ` [U-Boot] [PATCH 10/27] Blackfin: dont check baud if it wont actually get used Mike Frysinger
2009-01-29 0:03 ` [U-Boot] [PATCH 11/27] Blackfin: enable --gc-sections Mike Frysinger
2009-01-29 0:03 ` [U-Boot] [PATCH 12/27] Blackfin: cache core/system clock values Mike Frysinger
2009-01-29 0:03 ` [U-Boot] [PATCH 13/27] Blackfin: setup bi_enetaddr for single nets Mike Frysinger
2009-01-29 0:03 ` [U-Boot] [PATCH 14/27] Blackfin: rewrite cache handling functions Mike Frysinger
2009-01-29 0:03 ` [U-Boot] [PATCH 15/27] Blackfin: dma_memcpy(): fix random failures Mike Frysinger
2009-01-29 0:03 ` [U-Boot] [PATCH 16/27] Blackfin: only flag L1 instruction for DMA memcpy Mike Frysinger
2009-01-29 0:03 ` [U-Boot] [PATCH 17/27] Blackfin: use 8/16/32 bit transfer widths in dma_memcpy() Mike Frysinger
2009-01-29 0:03 ` [U-Boot] [PATCH 18/27] Blackfin: fix up EBIU defines Mike Frysinger
2009-01-29 0:03 ` [U-Boot] [PATCH 19/27] Blackfin: build with -mno-fdpic Mike Frysinger
2009-01-29 0:03 ` [U-Boot] [PATCH 20/27] Blackfin: add driver for on-chip NAND controller Mike Frysinger
2009-01-29 0:03 ` [U-Boot] [PATCH 21/27] Blackfin: add driver for on-chip ATAPI controller Mike Frysinger
2009-01-29 0:03 ` Mike Frysinger [this message]
2009-01-29 0:03 ` [U-Boot] [PATCH 23/27] Blackfin: update asm-blackfin/posix_types.h to latest Linux version Mike Frysinger
2009-01-29 0:03 ` [U-Boot] [PATCH 24/27] Blackfin: set default CONFIG_ENV_SPI_CS based on bootrom Mike Frysinger
2009-01-29 0:03 ` [U-Boot] [PATCH 25/27] Blackfin: output booting source when booting Mike Frysinger
2009-01-29 0:03 ` [U-Boot] [PATCH 26/27] Blackfin: add port muxing for BF51x SPI Mike Frysinger
2009-01-29 0:03 ` [U-Boot] [PATCH 27/27] Blackfin: add driver for on-chip MMC/SD controller Mike Frysinger
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1233187416-22378-23-git-send-email-vapier@gentoo.org \
--to=vapier@gentoo.org \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.