On Wed, 2009-02-11 at 14:13 +0530, Vijay Nikam wrote: > Hello All, > > I have mpc8313erdb evaluation board and currently I am writing GPIO > driver. Actually it is just simple test driver. > > I did the irq_request in the driver init function, as request_irq > returns zero (0) if successful, otherwise -1 on error and errno > indicates the error. But when I load or insert the module using insmod > request_irq return with Return Value -38. I checked in errno.h file in > asm-generic and 38 means ENOSYS - Function not implemented. > Following is irq_request code: > ---------------------- > ret = request_irq(74, interrupt_handler, SA_INTERRUPT | SA_SHIRQ , > "gpio", &mydev); > if(ret) > printk(KERN_INFO "Error in request_irq, value return = %d \n", ret); > ---------------------- > NOTE: 74 is the Interrupt ID Number for GPIO Interrupt. this > information is from Processor User Manual. > > Following is the handler: > --------------------- > static int interrupt_handler(int irqn, void *dev_id) > { > printk(KERN_INFO "Enter in interrupt handler\n"); > return IRQ_HANDLED; > } > -------------------- > > Usually request_irq return EBUSY, EINVAL but in my case it returns > ENOSYS (errno 38). I tried to look information for this errno in > interrupt context but could not able to find anything useful or > understable. Could anyone please let me know why this specific errno > 38 generated in request_irq ? ? ? and what are the possiblities for > resolving this error ? ? ? You don't mention what kernel version you're using. But you might be hitting the check in __setup_irq(): if (desc->chip == &no_irq_chip) return -ENOSYS; That would make sense because you're trying to map a raw irq number, which doesn't work. You first need to call irq_create_mapping(), like: int virq; virq = irq_create_mapping(NULL, 74); rc = request_irq(virq, ...); cheers -- Michael Ellerman OzLabs, IBM Australia Development Lab wwweb: http://michael.ellerman.id.au phone: +61 2 6212 1183 (tie line 70 21183) We do not inherit the earth from our ancestors, we borrow it from our children. - S.M.A.R.T Person