On Mon, 2009-05-04 at 13:50 -0400, Richard Farina wrote:
> Johannes Berg wrote:
> > It's not very helpful to see, in iwconfig, the current frequency
> > the card is tuned to if that frequency is currently somewhere
> > across the board because we're scanning. Since we keep track of
> > the frequency the user wants, display that instead.
> >
> > Signed-off-by: Johannes Berg <johannes@sipsolutions.net>
> > ---
> >  net/mac80211/wext.c |    2 +-
> >  1 file changed, 1 insertion(+), 1 deletion(-)
> >
> > --- wireless-testing.orig/net/mac80211/wext.c	2009-05-04 17:41:53.000000000 +0200
> > +++ wireless-testing/net/mac80211/wext.c	2009-05-04 17:42:02.000000000 +0200
> > @@ -185,7 +185,7 @@ static int ieee80211_ioctl_giwfreq(struc
> >  	if (sdata->vif.type == NL80211_IFTYPE_ADHOC)
> >  		return cfg80211_ibss_wext_giwfreq(dev, info, freq, extra);
> >  
> > -	freq->m = local->hw.conf.channel->center_freq;
> > +	freq->m = local->oper_channel->center_freq;
> >  	freq->e = 6;
> >  
> >  	return 0;
> >
> >
> >   
> Nack.  People should see the hardware channel. If I set channel 6 and my 
> wifi card is on channel 11 I need to see 11 not 6.  Doesn't make any 
> sense to show some imaginary idealistic "I wish it was on channel 6" 
> when the hardware is on channel 11.  Am I missing something here?

Umm, if _you_ set channel 11 then you _will_ see channel 11. It's just
that when it's scanning and happens to be on channel 132 instead of 11,
while you previously set 11, you will _after_ this patch see 11, not
132.

johannes