From mboxrd@z Thu Jan 1 00:00:00 1970 Return-path: Received: from mx2.redhat.com ([66.187.237.31]:35698 "EHLO mx2.redhat.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1753182AbZEMODM (ORCPT ); Wed, 13 May 2009 10:03:12 -0400 Subject: Re: [LIBERTAS-SDIO] Support for single transfer blocks? From: Dan Williams To: Andrew Morton Cc: Luis Galdos , linux-kernel@vger.kernel.org, linux-wireless@vger.kernel.org, Pierre Ossman In-Reply-To: <20090512231150.bc0c65c6.akpm@linux-foundation.org> References: <4A08392F.70108@digi.com> <20090512231150.bc0c65c6.akpm@linux-foundation.org> Content-Type: text/plain Date: Wed, 13 May 2009 10:03:28 -0400 Message-Id: <1242223408.11182.34.camel@localhost.localdomain> Mime-Version: 1.0 Sender: linux-wireless-owner@vger.kernel.org List-ID: On Tue, 2009-05-12 at 23:11 -0700, Andrew Morton wrote: > Let's Cc the wireless development list. And lets CC the MMC subsystem maintainer and original author of libertas_sdio too, so we can get an informed opinion :) What firmware version are you using? What SDIO controller is this? Has this controller been validated by Marvell for use with the 8686? (not that that is required or anything, just curious). All the information I have (up to firmware V10) references a block size of 32 bytes. The main firmware is transferred in 32-byte blocks using CMD 53, with a maximum number of 16 blocks transferred in a single CMD 53 write depending on how much data the helper firmware can accept in single write. The available vendor drivers also use a 32-byte block size. Data transfers are specified to use a block size of 320 bytes. Dan > On Mon, 11 May 2009 16:41:51 +0200 Luis Galdos wrote: > > > Hi all, > > > > I have one question concerning to the Libertas-driver: Does this driver works with > > SDIO-hosts that only support single transfer blocks? I ask cause I have seen two problems > > with a SDIO-port that doesn't support multiple blocks: > > > > * The firmware installation successes only with a modification of the block size (see > > below patch) > > > > * The transfer of Ethernet-frames works only if the "complete" frame is smaller than the > > block size of the SDIO-host. By larger packages, the SD8686 doesn't generate the expected > > IRQ (cause it expected a multiple transfer) and the driver detects a timeout. > > > > Do you know something about this? Thanks in advance, > > > > > > PS: Sorry for the possible wrong format of this email (my first one) > > > > > > diff --git a/drivers/net/wireless/libertas/if_sdio.c b/drivers/net/wireless/libertas/if_sdio.c > > index b54e2ea..f88a4da 100644 > > --- a/drivers/net/wireless/libertas/if_sdio.c > > +++ b/drivers/net/wireless/libertas/if_sdio.c > > @@ -33,6 +33,7 @@ > > #include > > #include > > #include > > +#include > > > > #include "host.h" > > #include "decl.h" > > @@ -507,6 +508,8 @@ static int if_sdio_prog_real(struct if_sdio_card *card) > > u32 chunk_size; > > const u8 *firmware; > > size_t size, req_size; > > + struct mmc_host *host; > > + int max_blksize = 0; > > > > lbs_deb_enter(LBS_DEB_SDIO); > > > > @@ -524,7 +527,19 @@ static int if_sdio_prog_real(struct if_sdio_card *card) > > > > sdio_claim_host(card->func); > > > > - ret = sdio_set_block_size(card->func, 32); > > + /* > > + * If the host doesn't support multi-blocks, then use the the maximal block > > + * size for the transfers. Otherwise the firmware installation will fail. > > + */ > > + host = card->func->card->host; > > + if (host->max_blk_count == 1) { > > + lbs_pr_info("Setting block size to %u\n", host->max_blk_size); > > + max_blksize = card->func->max_blksize; > > + card->func->max_blksize = host->max_blk_size; > > + ret = sdio_set_block_size(card->func, host->max_blk_size); > > + } else > > + ret = sdio_set_block_size(card->func, 32); > > + > > if (ret) > > goto release; > > > > @@ -593,6 +608,10 @@ static int if_sdio_prog_real(struct if_sdio_card *card) > > > > ret = 0; > > > > + /* Restore the original block size if it was changed before */ > > + if (max_blksize) > > + card->func->max_blksize = max_blksize; > > + > > lbs_deb_sdio("waiting for firmware to boot...\n"); > > > > /* wait for the firmware to boot */ > > > > > > -- > > Luis Galdos > > -- > > To unsubscribe from this list: send the line "unsubscribe linux-kernel" in > > the body of a message to majordomo@vger.kernel.org > > More majordomo info at http://vger.kernel.org/majordomo-info.html > > Please read the FAQ at http://www.tux.org/lkml/ > -- > To unsubscribe from this list: send the line "unsubscribe linux-wireless" in > the body of a message to majordomo@vger.kernel.org > More majordomo info at http://vger.kernel.org/majordomo-info.html