From: Alexey Fisher <bug-track@fisher-privat.net>
To: Jan Kara <jack@suse.cz>, Eric Sandeen <sandeen@redhat.com>,
Andreas Dilger <adilger@sun.com>,
linux-ext4@vger.kernel.org, Theodore Tso <tytso@mit.edu>
Cc: Alexey Fisher <bug-track@fisher-privat.net>
Subject: [PATCH v1] Unify log messages in ext3
Date: Sat, 21 Nov 2009 11:25:15 +0100 [thread overview]
Message-ID: <1258799115-10704-1-git-send-email-bug-track@fisher-privat.net> (raw)
make messages produced by ext3 more unified. It should be
easy to parse.
dmesg before patch:
[ 4893.684892] reservations ON
[ 4893.684896] xip option not supported
[ 4893.684964] EXT3-fs warning: maximal mount count reached, running
e2fsck is recommended
dmesg after patch:
[ 873.300792] EXT3-fs (loop0): using internal journaln
[ 873.300796] EXT3-fs (loop0): mounted filesystem with writeback data mode
[ 924.163657] EXT3-fs (loop0): error: can't find ext3 filesystem on dev loop0.
[ 723.755642] EXT3-fs (loop0): error: bad blocksize 8192
[ 357.874687] EXT3-fs (loop0): error: no journal found. mounting ext3 over ext2?
[ 873.300764] EXT3-fs (loop0): warning: maximal mount count reached, running e2fsck is recommended
[ 924.163657] EXT3-fs (loop0): error: can't find ext3 filesystem on dev loop0.
Signed-off-by: Alexey Fisher <bug-track@fisher-privat.net>
---
fs/ext3/super.c | 422 +++++++++++++++++++++++++++++--------------------------
1 files changed, 223 insertions(+), 199 deletions(-)
diff --git a/fs/ext3/super.c b/fs/ext3/super.c
index 427496c..9931464 100644
--- a/fs/ext3/super.c
+++ b/fs/ext3/super.c
@@ -135,12 +135,24 @@ void ext3_journal_abort_handle(const char *caller, const char *err_fn,
if (is_handle_aborted(handle))
return;
- printk(KERN_ERR "%s: aborting transaction: %s in %s\n",
- caller, errstr, err_fn);
+ printk(KERN_ERR "EXT3-fs: %s: aborting transaction: %s in %s\n",
+ caller, errstr, err_fn);
journal_abort_handle(handle);
}
+void ext3_msg(struct super_block *sb, const char *prefix,
+ const char *fmt, ...)
+{
+ va_list args;
+
+ va_start(args, fmt);
+ printk("%sEXT3-fs (%s): ", prefix, sb->s_id);
+ vprintk(fmt, args);
+ printk("\n");
+ va_end(args);
+}
+
/* Deal with the reporting of failure conditions on a filesystem such as
* inconsistencies detected or read IO failures.
*
@@ -174,12 +186,13 @@ static void ext3_handle_error(struct super_block *sb)
journal_abort(journal, -EIO);
}
if (test_opt (sb, ERRORS_RO)) {
- printk (KERN_CRIT "Remounting filesystem read-only\n");
+ ext3_msg(sb, KERN_CRIT,
+ "error: remounting filesystem read-only");
sb->s_flags |= MS_RDONLY;
}
ext3_commit_super(sb, es, 1);
if (test_opt(sb, ERRORS_PANIC))
- panic("EXT3-fs (device %s): panic forced after error\n",
+ panic("EXT3-fs (%s): panic forced after error\n",
sb->s_id);
}
@@ -247,8 +260,7 @@ void __ext3_std_error (struct super_block * sb, const char * function,
return;
errstr = ext3_decode_error(sb, errno, nbuf);
- printk (KERN_CRIT "EXT3-fs error (device %s) in %s: %s\n",
- sb->s_id, function, errstr);
+ ext3_msg(sb, KERN_CRIT, "error in %s: %s", function, errstr);
ext3_handle_error(sb);
}
@@ -268,21 +280,22 @@ void ext3_abort (struct super_block * sb, const char * function,
{
va_list args;
- printk (KERN_CRIT "ext3_abort called.\n");
+ ext3_msg(sb, KERN_CRIT, "ext3_abort called");
va_start(args, fmt);
- printk(KERN_CRIT "EXT3-fs error (device %s): %s: ",sb->s_id, function);
+ printk(KERN_CRIT "EXT3-fs (%s): error: %s: ", sb->s_id, function);
vprintk(fmt, args);
printk("\n");
va_end(args);
if (test_opt(sb, ERRORS_PANIC))
- panic("EXT3-fs panic from previous error\n");
+ panic("EXT3-fs: panic from previous error\n");
if (sb->s_flags & MS_RDONLY)
return;
- printk(KERN_CRIT "Remounting filesystem read-only\n");
+ ext3_msg(sb, KERN_CRIT,
+ "error: remounting filesystem read-only");
EXT3_SB(sb)->s_mount_state |= EXT3_ERROR_FS;
sb->s_flags |= MS_RDONLY;
EXT3_SB(sb)->s_mount_opt |= EXT3_MOUNT_ABORT;
@@ -296,7 +309,7 @@ void ext3_warning (struct super_block * sb, const char * function,
va_list args;
va_start(args, fmt);
- printk(KERN_WARNING "EXT3-fs warning (device %s): %s: ",
+ printk(KERN_WARNING "EXT3-fs (%s): warning: %s: ",
sb->s_id, function);
vprintk(fmt, args);
printk("\n");
@@ -310,10 +323,10 @@ void ext3_update_dynamic_rev(struct super_block *sb)
if (le32_to_cpu(es->s_rev_level) > EXT3_GOOD_OLD_REV)
return;
- ext3_warning(sb, __func__,
- "updating to rev %d because of new feature flag, "
- "running e2fsck is recommended",
- EXT3_DYNAMIC_REV);
+ ext3_msg(sb, KERN_WARNING,
+ "warning: updating to rev %d because of "
+ "new feature flag, running e2fsck is recommended",
+ EXT3_DYNAMIC_REV);
es->s_first_ino = cpu_to_le32(EXT3_GOOD_OLD_FIRST_INO);
es->s_inode_size = cpu_to_le16(EXT3_GOOD_OLD_INODE_SIZE);
@@ -342,8 +355,9 @@ static struct block_device *ext3_blkdev_get(dev_t dev)
return bdev;
fail:
- printk(KERN_ERR "EXT3: failed to open journal device %s: %ld\n",
- __bdevname(dev, b), PTR_ERR(bdev));
+ printk(KERN_ERR "EXT3-fs: failed to open journal device %s: %ld\n",
+ __bdevname(dev, b), PTR_ERR(bdev));
+
return NULL;
}
@@ -378,13 +392,13 @@ static void dump_orphan_list(struct super_block *sb, struct ext3_sb_info *sbi)
{
struct list_head *l;
- printk(KERN_ERR "sb orphan head is %d\n",
+ ext3_msg(sb, KERN_ERR, "error: sb orphan head is %d",
le32_to_cpu(sbi->s_es->s_last_orphan));
- printk(KERN_ERR "sb_info orphan list:\n");
+ ext3_msg(sb, KERN_ERR, "sb_info orphan list:");
list_for_each(l, &sbi->s_orphan) {
struct inode *inode = orphan_list_entry(l);
- printk(KERN_ERR " "
+ ext3_msg(sb, KERN_ERR, " "
"inode %s:%lu at %p: mode %o, nlink %d, next %d\n",
inode->i_sb->s_id, inode->i_ino, inode,
inode->i_mode, inode->i_nlink,
@@ -956,7 +970,8 @@ static int parse_options (char *options, struct super_block *sb,
#else
case Opt_user_xattr:
case Opt_nouser_xattr:
- printk("EXT3 (no)user_xattr options not supported\n");
+ ext3_msg(sb, KERN_INFO,
+ "(no)user_xattr options not supported");
break;
#endif
#ifdef CONFIG_EXT3_FS_POSIX_ACL
@@ -969,7 +984,8 @@ static int parse_options (char *options, struct super_block *sb,
#else
case Opt_acl:
case Opt_noacl:
- printk("EXT3 (no)acl options not supported\n");
+ ext3_msg(sb, KERN_INFO,
+ "(no)acl options not supported");
break;
#endif
case Opt_reservation:
@@ -985,16 +1001,16 @@ static int parse_options (char *options, struct super_block *sb,
user to specify an existing inode to be the
journal file. */
if (is_remount) {
- printk(KERN_ERR "EXT3-fs: cannot specify "
- "journal on remount\n");
+ ext3_msg(sb, KERN_ERR, "error: cannot specify "
+ "journal on remount");
return 0;
}
set_opt (sbi->s_mount_opt, UPDATE_JOURNAL);
break;
case Opt_journal_inum:
if (is_remount) {
- printk(KERN_ERR "EXT3-fs: cannot specify "
- "journal on remount\n");
+ ext3_msg(sb, KERN_ERR, "error: cannot specify "
+ "journal on remount");
return 0;
}
if (match_int(&args[0], &option))
@@ -1003,8 +1019,8 @@ static int parse_options (char *options, struct super_block *sb,
break;
case Opt_journal_dev:
if (is_remount) {
- printk(KERN_ERR "EXT3-fs: cannot specify "
- "journal on remount\n");
+ ext3_msg(sb, KERN_ERR, "error: cannot specify "
+ "journal on remount");
return 0;
}
if (match_int(&args[0], &option))
@@ -1036,12 +1052,11 @@ static int parse_options (char *options, struct super_block *sb,
if ((sbi->s_mount_opt & EXT3_MOUNT_DATA_FLAGS)
== data_opt)
break;
- printk(KERN_ERR
- "EXT3-fs (device %s): Cannot change "
+ ext3_msg(sb, KERN_ERR,
+ "error: cannot change "
"data mode on remount. The filesystem "
"is mounted in data=%s mode and you "
- "try to remount it in data=%s mode.\n",
- sb->s_id,
+ "try to remount it in data=%s mode.",
data_mode_string(sbi->s_mount_opt &
EXT3_MOUNT_DATA_FLAGS),
data_mode_string(data_opt));
@@ -1066,31 +1081,31 @@ static int parse_options (char *options, struct super_block *sb,
set_qf_name:
if (sb_any_quota_loaded(sb) &&
!sbi->s_qf_names[qtype]) {
- printk(KERN_ERR
- "EXT3-fs: Cannot change journaled "
- "quota options when quota turned on.\n");
+ ext3_msg(sb, KERN_ERR,
+ "error: cannot change journaled "
+ "quota options when quota turned on.");
return 0;
}
qname = match_strdup(&args[0]);
if (!qname) {
- printk(KERN_ERR
- "EXT3-fs: not enough memory for "
- "storing quotafile name.\n");
+ ext3_msg(sb, KERN_ERR,
+ "error: not enough memory for "
+ "storing quotafile name.");
return 0;
}
if (sbi->s_qf_names[qtype] &&
strcmp(sbi->s_qf_names[qtype], qname)) {
- printk(KERN_ERR
- "EXT3-fs: %s quota file already "
- "specified.\n", QTYPE2NAME(qtype));
+ ext3_msg(sb, KERN_ERR,
+ "error: %s quota file already "
+ "specified.", QTYPE2NAME(qtype));
kfree(qname);
return 0;
}
sbi->s_qf_names[qtype] = qname;
if (strchr(sbi->s_qf_names[qtype], '/')) {
- printk(KERN_ERR
- "EXT3-fs: quotafile must be on "
- "filesystem root.\n");
+ ext3_msg(sb, KERN_ERR,
+ "error: quotafile must be on "
+ "filesystem root.");
kfree(sbi->s_qf_names[qtype]);
sbi->s_qf_names[qtype] = NULL;
return 0;
@@ -1105,9 +1120,9 @@ set_qf_name:
clear_qf_name:
if (sb_any_quota_loaded(sb) &&
sbi->s_qf_names[qtype]) {
- printk(KERN_ERR "EXT3-fs: Cannot change "
+ ext3_msg(sb, KERN_ERR, "error: cannot change "
"journaled quota options when "
- "quota turned on.\n");
+ "quota turned on.");
return 0;
}
/*
@@ -1124,9 +1139,9 @@ clear_qf_name:
set_qf_format:
if (sb_any_quota_loaded(sb) &&
sbi->s_jquota_fmt != qfmt) {
- printk(KERN_ERR "EXT3-fs: Cannot change "
+ ext3_msg(sb, KERN_ERR, "error: cannot change "
"journaled quota options when "
- "quota turned on.\n");
+ "quota turned on.");
return 0;
}
sbi->s_jquota_fmt = qfmt;
@@ -1142,8 +1157,8 @@ set_qf_format:
break;
case Opt_noquota:
if (sb_any_quota_loaded(sb)) {
- printk(KERN_ERR "EXT3-fs: Cannot change quota "
- "options when quota turned on.\n");
+ ext3_msg(sb, KERN_ERR, "error: cannot change "
+ "quota options when quota turned on.");
return 0;
}
clear_opt(sbi->s_mount_opt, QUOTA);
@@ -1154,8 +1169,8 @@ set_qf_format:
case Opt_quota:
case Opt_usrquota:
case Opt_grpquota:
- printk(KERN_ERR
- "EXT3-fs: quota options not supported.\n");
+ ext3_msg(sb, KERN_ERR,
+ "error: quota options not supported.");
break;
case Opt_usrjquota:
case Opt_grpjquota:
@@ -1163,9 +1178,9 @@ set_qf_format:
case Opt_offgrpjquota:
case Opt_jqfmt_vfsold:
case Opt_jqfmt_vfsv0:
- printk(KERN_ERR
- "EXT3-fs: journaled quota options not "
- "supported.\n");
+ ext3_msg(sb, KERN_ERR,
+ "error: journaled quota options not "
+ "supported.");
break;
case Opt_noquota:
break;
@@ -1185,8 +1200,9 @@ set_qf_format:
break;
case Opt_resize:
if (!is_remount) {
- printk("EXT3-fs: resize option only available "
- "for remount\n");
+ ext3_msg(sb, KERN_ERR,
+ "error: resize option only available "
+ "for remount");
return 0;
}
if (match_int(&args[0], &option) != 0)
@@ -1200,9 +1216,9 @@ set_qf_format:
clear_opt(sbi->s_mount_opt, NOBH);
break;
default:
- printk (KERN_ERR
- "EXT3-fs: Unrecognized mount option \"%s\" "
- "or missing value\n", p);
+ ext3_msg(sb, KERN_ERR,
+ "error: unrecognized mount option \"%s\" "
+ "or missing valuen", p);
return 0;
}
}
@@ -1220,21 +1236,21 @@ set_qf_format:
(sbi->s_mount_opt & EXT3_MOUNT_GRPQUOTA)) ||
(sbi->s_qf_names[GRPQUOTA] &&
(sbi->s_mount_opt & EXT3_MOUNT_USRQUOTA))) {
- printk(KERN_ERR "EXT3-fs: old and new quota "
- "format mixing.\n");
+ ext3_msg(sb, KERN_ERR, "error: old and new quota "
+ "format mixing.");
return 0;
}
if (!sbi->s_jquota_fmt) {
- printk(KERN_ERR "EXT3-fs: journaled quota format "
- "not specified.\n");
+ ext3_msg(sb, KERN_ERR, "error: journaled quota format "
+ "not specified.");
return 0;
}
} else {
if (sbi->s_jquota_fmt) {
- printk(KERN_ERR "EXT3-fs: journaled quota format "
+ ext3_msg(sb, KERN_ERR, "error: journaled quota format "
"specified with no journaling "
- "enabled.\n");
+ "enabled.");
return 0;
}
}
@@ -1249,31 +1265,33 @@ static int ext3_setup_super(struct super_block *sb, struct ext3_super_block *es,
int res = 0;
if (le32_to_cpu(es->s_rev_level) > EXT3_MAX_SUPP_REV) {
- printk (KERN_ERR "EXT3-fs warning: revision level too high, "
- "forcing read-only mode\n");
+ ext3_msg(sb, KERN_ERR,
+ "error: revision level too high, "
+ "forcing read-only mode");
res = MS_RDONLY;
}
if (read_only)
return res;
if (!(sbi->s_mount_state & EXT3_VALID_FS))
- printk (KERN_WARNING "EXT3-fs warning: mounting unchecked fs, "
- "running e2fsck is recommended\n");
+ ext3_msg(sb, KERN_WARNING,
+ "warning: mounting unchecked fs, "
+ "running e2fsck is recommended");
else if ((sbi->s_mount_state & EXT3_ERROR_FS))
- printk (KERN_WARNING
- "EXT3-fs warning: mounting fs with errors, "
- "running e2fsck is recommended\n");
+ ext3_msg(sb, KERN_WARNING,
+ "warning: mounting fs with errors, "
+ "running e2fsck is recommended");
else if ((__s16) le16_to_cpu(es->s_max_mnt_count) >= 0 &&
le16_to_cpu(es->s_mnt_count) >=
(unsigned short) (__s16) le16_to_cpu(es->s_max_mnt_count))
- printk (KERN_WARNING
- "EXT3-fs warning: maximal mount count reached, "
- "running e2fsck is recommended\n");
+ ext3_msg(sb, KERN_WARNING,
+ "warning: maximal mount count reached, "
+ "running e2fsck is recommended");
else if (le32_to_cpu(es->s_checkinterval) &&
(le32_to_cpu(es->s_lastcheck) +
le32_to_cpu(es->s_checkinterval) <= get_seconds()))
- printk (KERN_WARNING
- "EXT3-fs warning: checktime reached, "
- "running e2fsck is recommended\n");
+ ext3_msg(sb, KERN_WARNING,
+ "warning: checktime reached, "
+ "running e2fsck is recommended");
#if 0
/* @@@ We _will_ want to clear the valid bit if we find
inconsistencies, to force a fsck at reboot. But for
@@ -1290,22 +1308,20 @@ static int ext3_setup_super(struct super_block *sb, struct ext3_super_block *es,
ext3_commit_super(sb, es, 1);
if (test_opt(sb, DEBUG))
- printk(KERN_INFO "[EXT3 FS bs=%lu, gc=%lu, "
- "bpg=%lu, ipg=%lu, mo=%04lx]\n",
+ ext3_msg(sb, KERN_INFO, "[bs=%lu, gc=%lu, "
+ "bpg=%lu, ipg=%lu, mo=%04lx]",
sb->s_blocksize,
sbi->s_groups_count,
EXT3_BLOCKS_PER_GROUP(sb),
EXT3_INODES_PER_GROUP(sb),
sbi->s_mount_opt);
- printk(KERN_INFO "EXT3 FS on %s, ", sb->s_id);
if (EXT3_SB(sb)->s_journal->j_inode == NULL) {
char b[BDEVNAME_SIZE];
-
- printk("external journal on %s\n",
+ ext3_msg(sb, KERN_INFO, "using externa journal on %s",
bdevname(EXT3_SB(sb)->s_journal->j_dev, b));
} else {
- printk("internal journal\n");
+ ext3_msg(sb, KERN_INFO, "using internal journaln");
}
return res;
}
@@ -1399,8 +1415,8 @@ static void ext3_orphan_cleanup (struct super_block * sb,
}
if (bdev_read_only(sb->s_bdev)) {
- printk(KERN_ERR "EXT3-fs: write access "
- "unavailable, skipping orphan cleanup.\n");
+ ext3_msg(sb, KERN_ERR, "error: write access "
+ "unavailable, skipping orphan cleanup.");
return;
}
@@ -1414,8 +1430,7 @@ static void ext3_orphan_cleanup (struct super_block * sb,
}
if (s_flags & MS_RDONLY) {
- printk(KERN_INFO "EXT3-fs: %s: orphan cleanup on readonly fs\n",
- sb->s_id);
+ ext3_msg(sb, KERN_INFO, "orphan cleanup on readonly fs");
sb->s_flags &= ~MS_RDONLY;
}
#ifdef CONFIG_QUOTA
@@ -1426,9 +1441,9 @@ static void ext3_orphan_cleanup (struct super_block * sb,
if (EXT3_SB(sb)->s_qf_names[i]) {
int ret = ext3_quota_on_mount(sb, i);
if (ret < 0)
- printk(KERN_ERR
- "EXT3-fs: Cannot turn on journaled "
- "quota: error %d\n", ret);
+ ext3_msg(sb, KERN_ERR,
+ "error: cannot turn on journaled "
+ "quota: %d", ret);
}
}
#endif
@@ -1466,11 +1481,11 @@ static void ext3_orphan_cleanup (struct super_block * sb,
#define PLURAL(x) (x), ((x)==1) ? "" : "s"
if (nr_orphans)
- printk(KERN_INFO "EXT3-fs: %s: %d orphan inode%s deleted\n",
- sb->s_id, PLURAL(nr_orphans));
+ ext3_msg(sb, KERN_INFO, "%d orphan inode%s deleted",
+ PLURAL(nr_orphans));
if (nr_truncates)
- printk(KERN_INFO "EXT3-fs: %s: %d truncate%s cleaned up\n",
- sb->s_id, PLURAL(nr_truncates));
+ ext3_msg(sb, KERN_INFO, "%d truncate%s cleaned up",
+ PLURAL(nr_truncates));
#ifdef CONFIG_QUOTA
/* Turn quotas off */
for (i = 0; i < MAXQUOTAS; i++) {
@@ -1590,7 +1605,7 @@ static int ext3_fill_super (struct super_block *sb, void *data, int silent)
blocksize = sb_min_blocksize(sb, EXT3_MIN_BLOCK_SIZE);
if (!blocksize) {
- printk(KERN_ERR "EXT3-fs: unable to set blocksize\n");
+ ext3_msg(sb, KERN_ERR, "error: unable to set blocksize");
goto out_fail;
}
@@ -1606,7 +1621,7 @@ static int ext3_fill_super (struct super_block *sb, void *data, int silent)
}
if (!(bh = sb_bread(sb, logic_sb_block))) {
- printk (KERN_ERR "EXT3-fs: unable to read superblock\n");
+ ext3_msg(sb, KERN_ERR, "error: unable to read superblock");
goto out_fail;
}
/*
@@ -1665,9 +1680,9 @@ static int ext3_fill_super (struct super_block *sb, void *data, int silent)
(EXT3_HAS_COMPAT_FEATURE(sb, ~0U) ||
EXT3_HAS_RO_COMPAT_FEATURE(sb, ~0U) ||
EXT3_HAS_INCOMPAT_FEATURE(sb, ~0U)))
- printk(KERN_WARNING
- "EXT3-fs warning: feature flags set on rev 0 fs, "
- "running e2fsck is recommended\n");
+ ext3_msg(sb, KERN_WARNING,
+ "warning: feature flags set on rev 0 fs, "
+ "running e2fsck is recommended");
/*
* Check feature flags regardless of the revision level, since we
* previously didn't change the revision level when setting the flags,
@@ -1675,25 +1690,25 @@ static int ext3_fill_super (struct super_block *sb, void *data, int silent)
*/
features = EXT3_HAS_INCOMPAT_FEATURE(sb, ~EXT3_FEATURE_INCOMPAT_SUPP);
if (features) {
- printk(KERN_ERR "EXT3-fs: %s: couldn't mount because of "
- "unsupported optional features (%x).\n",
- sb->s_id, le32_to_cpu(features));
+ ext3_msg(sb, KERN_ERR,
+ "error: couldn't mount because of unsupported "
+ "optional features (%x)", le32_to_cpu(features));
goto failed_mount;
}
features = EXT3_HAS_RO_COMPAT_FEATURE(sb, ~EXT3_FEATURE_RO_COMPAT_SUPP);
if (!(sb->s_flags & MS_RDONLY) && features) {
- printk(KERN_ERR "EXT3-fs: %s: couldn't mount RDWR because of "
- "unsupported optional features (%x).\n",
- sb->s_id, le32_to_cpu(features));
+ ext3_msg(sb, KERN_ERR,
+ "error: couldn't mount RDWR because of unsupported "
+ "optional features (%x)", le32_to_cpu(features));
goto failed_mount;
}
blocksize = BLOCK_SIZE << le32_to_cpu(es->s_log_block_size);
if (blocksize < EXT3_MIN_BLOCK_SIZE ||
blocksize > EXT3_MAX_BLOCK_SIZE) {
- printk(KERN_ERR
- "EXT3-fs: Unsupported filesystem blocksize %d on %s.\n",
- blocksize, sb->s_id);
+ ext3_msg(sb, KERN_ERR,
+ "error: couldn't mount because of unsupported "
+ "filesystem blocksize %d", blocksize);
goto failed_mount;
}
@@ -1704,30 +1719,31 @@ static int ext3_fill_super (struct super_block *sb, void *data, int silent)
* than the hardware sectorsize for the machine.
*/
if (blocksize < hblock) {
- printk(KERN_ERR "EXT3-fs: blocksize %d too small for "
- "device blocksize %d.\n", blocksize, hblock);
+ ext3_msg(sb, KERN_ERR,
+ "error: fsblocksize %d too small for "
+ "hardware sectorsize %d", blocksize, hblock);
goto failed_mount;
}
brelse (bh);
if (!sb_set_blocksize(sb, blocksize)) {
- printk(KERN_ERR "EXT3-fs: bad blocksize %d.\n",
- blocksize);
+ ext3_msg(sb, KERN_ERR,
+ "error: bad blocksize %d", blocksize);
goto out_fail;
}
logic_sb_block = (sb_block * EXT3_MIN_BLOCK_SIZE) / blocksize;
offset = (sb_block * EXT3_MIN_BLOCK_SIZE) % blocksize;
bh = sb_bread(sb, logic_sb_block);
if (!bh) {
- printk(KERN_ERR
- "EXT3-fs: Can't read superblock on 2nd try.\n");
+ ext3_msg(sb, KERN_ERR,
+ "error: can't read superblock on 2nd try");
goto failed_mount;
}
es = (struct ext3_super_block *)(((char *)bh->b_data) + offset);
sbi->s_es = es;
if (es->s_magic != cpu_to_le16(EXT3_SUPER_MAGIC)) {
- printk (KERN_ERR
- "EXT3-fs: Magic mismatch, very weird !\n");
+ ext3_msg(sb, KERN_ERR,
+ "error: magic mismatch");
goto failed_mount;
}
}
@@ -1743,8 +1759,8 @@ static int ext3_fill_super (struct super_block *sb, void *data, int silent)
if ((sbi->s_inode_size < EXT3_GOOD_OLD_INODE_SIZE) ||
(!is_power_of_2(sbi->s_inode_size)) ||
(sbi->s_inode_size > blocksize)) {
- printk (KERN_ERR
- "EXT3-fs: unsupported inode size: %d\n",
+ ext3_msg(sb, KERN_ERR,
+ "error: unsupported inode size: %d",
sbi->s_inode_size);
goto failed_mount;
}
@@ -1752,8 +1768,8 @@ static int ext3_fill_super (struct super_block *sb, void *data, int silent)
sbi->s_frag_size = EXT3_MIN_FRAG_SIZE <<
le32_to_cpu(es->s_log_frag_size);
if (blocksize != sbi->s_frag_size) {
- printk(KERN_ERR
- "EXT3-fs: fragsize %lu != blocksize %u (unsupported)\n",
+ ext3_msg(sb, KERN_ERR,
+ "error: fragsize %lu != blocksize %u (unsupported)",
sbi->s_frag_size, blocksize);
goto failed_mount;
}
@@ -1789,31 +1805,31 @@ static int ext3_fill_super (struct super_block *sb, void *data, int silent)
}
if (sbi->s_blocks_per_group > blocksize * 8) {
- printk (KERN_ERR
- "EXT3-fs: #blocks per group too big: %lu\n",
+ ext3_msg(sb, KERN_ERR,
+ "#blocks per group too big: %lu",
sbi->s_blocks_per_group);
goto failed_mount;
}
if (sbi->s_frags_per_group > blocksize * 8) {
- printk (KERN_ERR
- "EXT3-fs: #fragments per group too big: %lu\n",
+ ext3_msg(sb, KERN_ERR,
+ "error: #fragments per group too big: %lu",
sbi->s_frags_per_group);
goto failed_mount;
}
if (sbi->s_inodes_per_group > blocksize * 8) {
- printk (KERN_ERR
- "EXT3-fs: #inodes per group too big: %lu\n",
+ ext3_msg(sb, KERN_ERR,
+ "error: #inodes per group too big: %lu",
sbi->s_inodes_per_group);
goto failed_mount;
}
if (le32_to_cpu(es->s_blocks_count) >
(sector_t)(~0ULL) >> (sb->s_blocksize_bits - 9)) {
- printk(KERN_ERR "EXT3-fs: filesystem on %s:"
- " too large to mount safely\n", sb->s_id);
+ ext3_msg(sb, KERN_ERR,
+ "error: filesystem is too large to mount safely");
if (sizeof(sector_t) < 8)
- printk(KERN_WARNING "EXT3-fs: CONFIG_LBDAF not "
- "enabled\n");
+ ext3_msg(sb, KERN_ERR,
+ "error: CONFIG_LBDAF not enabled");
goto failed_mount;
}
@@ -1827,7 +1843,8 @@ static int ext3_fill_super (struct super_block *sb, void *data, int silent)
sbi->s_group_desc = kmalloc(db_count * sizeof (struct buffer_head *),
GFP_KERNEL);
if (sbi->s_group_desc == NULL) {
- printk (KERN_ERR "EXT3-fs: not enough memory\n");
+ ext3_msg(sb, KERN_ERR,
+ "error: not enough memory");
goto failed_mount;
}
@@ -1837,14 +1854,15 @@ static int ext3_fill_super (struct super_block *sb, void *data, int silent)
block = descriptor_loc(sb, logic_sb_block, i);
sbi->s_group_desc[i] = sb_bread(sb, block);
if (!sbi->s_group_desc[i]) {
- printk (KERN_ERR "EXT3-fs: "
- "can't read group descriptor %d\n", i);
+ ext3_msg(sb, KERN_ERR,
+ "error: can't read group descriptor %d", i);
db_count = i;
goto failed_mount2;
}
}
if (!ext3_check_descriptors (sb)) {
- printk(KERN_ERR "EXT3-fs: group descriptors corrupted!\n");
+ ext3_msg(sb, KERN_ERR,
+ "error: group descriptors corrupted");
goto failed_mount2;
}
sbi->s_gdb_count = db_count;
@@ -1862,7 +1880,7 @@ static int ext3_fill_super (struct super_block *sb, void *data, int silent)
ext3_count_dirs(sb));
}
if (err) {
- printk(KERN_ERR "EXT3-fs: insufficient memory\n");
+ ext3_msg(sb, KERN_ERR, "error: insufficient memory");
goto failed_mount3;
}
@@ -1910,9 +1928,9 @@ static int ext3_fill_super (struct super_block *sb, void *data, int silent)
goto failed_mount3;
} else {
if (!silent)
- printk (KERN_ERR
- "ext3: No journal on filesystem on %s\n",
- sb->s_id);
+ ext3_msg(sb, KERN_ERR,
+ "error: no journal found. "
+ "mounting ext3 over ext2?");
goto failed_mount3;
}
@@ -1934,8 +1952,9 @@ static int ext3_fill_super (struct super_block *sb, void *data, int silent)
case EXT3_MOUNT_WRITEBACK_DATA:
if (!journal_check_available_features
(sbi->s_journal, 0, 0, JFS_FEATURE_INCOMPAT_REVOKE)) {
- printk(KERN_ERR "EXT3-fs: Journal does not support "
- "requested data journaling mode\n");
+ ext3_msg(sb, KERN_ERR,
+ "error: journal does not support "
+ "requested data journaling mode");
goto failed_mount4;
}
default:
@@ -1944,8 +1963,9 @@ static int ext3_fill_super (struct super_block *sb, void *data, int silent)
if (test_opt(sb, NOBH)) {
if (!(test_opt(sb, DATA_FLAGS) == EXT3_MOUNT_WRITEBACK_DATA)) {
- printk(KERN_WARNING "EXT3-fs: Ignoring nobh option - "
- "its supported only with writeback mode\n");
+ ext3_msg(sb, KERN_WARNING,
+ "warning: ignoring nobh option - "
+ "its supported only with writeback mode");
clear_opt(sbi->s_mount_opt, NOBH);
}
}
@@ -1956,18 +1976,18 @@ static int ext3_fill_super (struct super_block *sb, void *data, int silent)
root = ext3_iget(sb, EXT3_ROOT_INO);
if (IS_ERR(root)) {
- printk(KERN_ERR "EXT3-fs: get root inode failed\n");
+ ext3_msg(sb, KERN_ERR, "error: get root inode failed");
ret = PTR_ERR(root);
goto failed_mount4;
}
if (!S_ISDIR(root->i_mode) || !root->i_blocks || !root->i_size) {
iput(root);
- printk(KERN_ERR "EXT3-fs: corrupt root inode, run e2fsck\n");
+ ext3_msg(sb, KERN_ERR, "error: corrupt root inode, run e2fsck");
goto failed_mount4;
}
sb->s_root = d_alloc_root(root);
if (!sb->s_root) {
- printk(KERN_ERR "EXT3-fs: get root dentry failed\n");
+ ext3_msg(sb, KERN_ERR, "error: get root dentry failed");
iput(root);
ret = -ENOMEM;
goto failed_mount4;
@@ -1986,9 +2006,9 @@ static int ext3_fill_super (struct super_block *sb, void *data, int silent)
ext3_orphan_cleanup(sb, es);
EXT3_SB(sb)->s_mount_state &= ~EXT3_ORPHAN_FS;
if (needs_recovery)
- printk (KERN_INFO "EXT3-fs: recovery complete.\n");
+ ext3_msg(sb, KERN_INFO, "recovery complete");
ext3_mark_recovery_complete(sb, es);
- printk (KERN_INFO "EXT3-fs: mounted filesystem with %s data mode.\n",
+ ext3_msg(sb, KERN_INFO, "mounted filesystem with %s data mode",
test_opt(sb,DATA_FLAGS) == EXT3_MOUNT_JOURNAL_DATA ? "journal":
test_opt(sb,DATA_FLAGS) == EXT3_MOUNT_ORDERED_DATA ? "ordered":
"writeback");
@@ -1998,7 +2018,8 @@ static int ext3_fill_super (struct super_block *sb, void *data, int silent)
cantfind_ext3:
if (!silent)
- printk(KERN_ERR "VFS: Can't find ext3 filesystem on dev %s.\n",
+ ext3_msg(sb, KERN_INFO,
+ "error: can't find ext3 filesystem on dev %s.",
sb->s_id);
goto failed_mount;
@@ -2066,27 +2087,27 @@ static journal_t *ext3_get_journal(struct super_block *sb,
journal_inode = ext3_iget(sb, journal_inum);
if (IS_ERR(journal_inode)) {
- printk(KERN_ERR "EXT3-fs: no journal found.\n");
+ ext3_msg(sb, KERN_ERR, "error: no journal found");
return NULL;
}
if (!journal_inode->i_nlink) {
make_bad_inode(journal_inode);
iput(journal_inode);
- printk(KERN_ERR "EXT3-fs: journal inode is deleted.\n");
+ ext3_msg(sb, KERN_ERR, "error: journal inode is deleted");
return NULL;
}
jbd_debug(2, "Journal inode found at %p: %Ld bytes\n",
journal_inode, journal_inode->i_size);
if (!S_ISREG(journal_inode->i_mode)) {
- printk(KERN_ERR "EXT3-fs: invalid journal inode.\n");
+ ext3_msg(sb, KERN_ERR, "error: invalid journal inode");
iput(journal_inode);
return NULL;
}
journal = journal_init_inode(journal_inode);
if (!journal) {
- printk(KERN_ERR "EXT3-fs: Could not load journal inode\n");
+ ext3_msg(sb, KERN_ERR, "error: could not load journal inode");
iput(journal_inode);
return NULL;
}
@@ -2113,8 +2134,8 @@ static journal_t *ext3_get_dev_journal(struct super_block *sb,
return NULL;
if (bd_claim(bdev, sb)) {
- printk(KERN_ERR
- "EXT3: failed to claim external journal device.\n");
+ ext3_msg(sb, KERN_ERR,
+ "error: failed to claim external journal device");
blkdev_put(bdev, FMODE_READ|FMODE_WRITE);
return NULL;
}
@@ -2122,8 +2143,8 @@ static journal_t *ext3_get_dev_journal(struct super_block *sb,
blocksize = sb->s_blocksize;
hblock = bdev_logical_block_size(bdev);
if (blocksize < hblock) {
- printk(KERN_ERR
- "EXT3-fs: blocksize too small for journal device.\n");
+ ext3_msg(sb, KERN_ERR,
+ "error: blocksize too small for journal device");
goto out_bdev;
}
@@ -2131,8 +2152,8 @@ static journal_t *ext3_get_dev_journal(struct super_block *sb,
offset = EXT3_MIN_BLOCK_SIZE % blocksize;
set_blocksize(bdev, blocksize);
if (!(bh = __bread(bdev, sb_block, blocksize))) {
- printk(KERN_ERR "EXT3-fs: couldn't read superblock of "
- "external journal\n");
+ ext3_msg(sb, KERN_ERR, "error: couldn't read superblock of "
+ "external journal");
goto out_bdev;
}
@@ -2140,14 +2161,14 @@ static journal_t *ext3_get_dev_journal(struct super_block *sb,
if ((le16_to_cpu(es->s_magic) != EXT3_SUPER_MAGIC) ||
!(le32_to_cpu(es->s_feature_incompat) &
EXT3_FEATURE_INCOMPAT_JOURNAL_DEV)) {
- printk(KERN_ERR "EXT3-fs: external journal has "
- "bad superblock\n");
+ ext3_msg(sb, KERN_ERR, "error: external journal has "
+ "bad superblock");
brelse(bh);
goto out_bdev;
}
if (memcmp(EXT3_SB(sb)->s_es->s_journal_uuid, es->s_uuid, 16)) {
- printk(KERN_ERR "EXT3-fs: journal UUID does not match\n");
+ ext3_msg(sb, KERN_ERR, "error: journal UUID does not match");
brelse(bh);
goto out_bdev;
}
@@ -2159,19 +2180,21 @@ static journal_t *ext3_get_dev_journal(struct super_block *sb,
journal = journal_init_dev(bdev, sb->s_bdev,
start, len, blocksize);
if (!journal) {
- printk(KERN_ERR "EXT3-fs: failed to create device journal\n");
+ ext3_msg(sb, KERN_ERR,
+ "error: failed to create device journal");
goto out_bdev;
}
journal->j_private = sb;
ll_rw_block(READ, 1, &journal->j_sb_buffer);
wait_on_buffer(journal->j_sb_buffer);
if (!buffer_uptodate(journal->j_sb_buffer)) {
- printk(KERN_ERR "EXT3-fs: I/O error on journal device\n");
+ ext3_msg(sb, KERN_ERR, "I/O error on journal device");
goto out_journal;
}
if (be32_to_cpu(journal->j_superblock->s_nr_users) != 1) {
- printk(KERN_ERR "EXT3-fs: External journal has more than one "
- "user (unsupported) - %d\n",
+ ext3_msg(sb, KERN_ERR,
+ "error: external journal has more than one "
+ "user (unsupported) - %d",
be32_to_cpu(journal->j_superblock->s_nr_users));
goto out_journal;
}
@@ -2197,8 +2220,8 @@ static int ext3_load_journal(struct super_block *sb,
if (journal_devnum &&
journal_devnum != le32_to_cpu(es->s_journal_dev)) {
- printk(KERN_INFO "EXT3-fs: external journal device major/minor "
- "numbers have changed\n");
+ ext3_msg(sb, KERN_INFO, "external journal device major/minor "
+ "numbers have changed");
journal_dev = new_decode_dev(journal_devnum);
} else
journal_dev = new_decode_dev(le32_to_cpu(es->s_journal_dev));
@@ -2213,21 +2236,21 @@ static int ext3_load_journal(struct super_block *sb,
if (EXT3_HAS_INCOMPAT_FEATURE(sb, EXT3_FEATURE_INCOMPAT_RECOVER)) {
if (sb->s_flags & MS_RDONLY) {
- printk(KERN_INFO "EXT3-fs: INFO: recovery "
- "required on readonly filesystem.\n");
+ ext3_msg(sb, KERN_INFO,
+ "recovery required on readonly filesystem");
if (really_read_only) {
- printk(KERN_ERR "EXT3-fs: write access "
- "unavailable, cannot proceed.\n");
+ ext3_msg(sb, KERN_ERR, "error: write access "
+ "unavailable, cannot proceed");
return -EROFS;
}
- printk (KERN_INFO "EXT3-fs: write access will "
- "be enabled during recovery.\n");
+ ext3_msg(sb, KERN_INFO,
+ "write access will be enabled during recovery");
}
}
if (journal_inum && journal_dev) {
- printk(KERN_ERR "EXT3-fs: filesystem has both journal "
- "and inode journals!\n");
+ ext3_msg(sb, KERN_ERR, "error: filesystem has both journal "
+ "and inode journals");
return -EINVAL;
}
@@ -2242,7 +2265,7 @@ static int ext3_load_journal(struct super_block *sb,
if (!really_read_only && test_opt(sb, UPDATE_JOURNAL)) {
err = journal_update_format(journal);
if (err) {
- printk(KERN_ERR "EXT3-fs: error updating journal.\n");
+ ext3_msg(sb, KERN_ERR, "error updating journal");
journal_destroy(journal);
return err;
}
@@ -2254,7 +2277,7 @@ static int ext3_load_journal(struct super_block *sb,
err = journal_load(journal);
if (err) {
- printk(KERN_ERR "EXT3-fs: error loading journal.\n");
+ ext3_msg(sb, KERN_ERR, "error loading journal");
journal_destroy(journal);
return err;
}
@@ -2273,16 +2296,17 @@ static int ext3_load_journal(struct super_block *sb,
return 0;
}
-static int ext3_create_journal(struct super_block * sb,
- struct ext3_super_block * es,
+static int ext3_create_journal(struct super_block *sb,
+ struct ext3_super_block *es,
unsigned int journal_inum)
{
journal_t *journal;
int err;
if (sb->s_flags & MS_RDONLY) {
- printk(KERN_ERR "EXT3-fs: readonly filesystem when trying to "
- "create journal.\n");
+ ext3_msg(sb, KERN_ERR,
+ "error: readonly filesystem when trying to "
+ "create journal");
return -EROFS;
}
@@ -2290,12 +2314,12 @@ static int ext3_create_journal(struct super_block * sb,
if (!journal)
return -EINVAL;
- printk(KERN_INFO "EXT3-fs: creating new journal on inode %u\n",
+ ext3_msg(sb, KERN_INFO, "creating new journal on inode %u",
journal_inum);
err = journal_create(journal);
if (err) {
- printk(KERN_ERR "EXT3-fs: error creating journal.\n");
+ ext3_msg(sb, KERN_ERR, "error creating journal");
journal_destroy(journal);
return -EIO;
}
@@ -2376,8 +2400,8 @@ out:
* has recorded an error from a previous lifetime, move that error to the
* main filesystem now.
*/
-static void ext3_clear_journal_err(struct super_block * sb,
- struct ext3_super_block * es)
+static void ext3_clear_journal_err(struct super_block *sb,
+ struct ext3_super_block *es)
{
journal_t *journal;
int j_errno;
@@ -2568,10 +2592,10 @@ static int ext3_remount (struct super_block * sb, int * flags, char * data)
__le32 ret;
if ((ret = EXT3_HAS_RO_COMPAT_FEATURE(sb,
~EXT3_FEATURE_RO_COMPAT_SUPP))) {
- printk(KERN_WARNING "EXT3-fs: %s: couldn't "
- "remount RDWR because of unsupported "
- "optional features (%x).\n",
- sb->s_id, le32_to_cpu(ret));
+ ext3_msg(sb, KERN_WARNING,
+ "warning: couldn't remount RDWR "
+ "because of unsupported optional "
+ "features (%x)", le32_to_cpu(ret));
err = -EROFS;
goto restore_opts;
}
@@ -2582,11 +2606,10 @@ static int ext3_remount (struct super_block * sb, int * flags, char * data)
* require a full umount/remount for now.
*/
if (es->s_last_orphan) {
- printk(KERN_WARNING "EXT3-fs: %s: couldn't "
+ ext3_msg(sb, KERN_WARNING, "warning: couldn't "
"remount RDWR because of unprocessed "
"orphan inode list. Please "
- "umount/remount instead.\n",
- sb->s_id);
+ "umount/remount instead.");
err = -EINVAL;
goto restore_opts;
}
@@ -2837,9 +2860,9 @@ static int ext3_quota_on(struct super_block *sb, int type, int format_id,
if (EXT3_SB(sb)->s_qf_names[type]) {
/* Quotafile not of fs root? */
if (path.dentry->d_parent != sb->s_root)
- printk(KERN_WARNING
- "EXT3-fs: Quota file not on filesystem root. "
- "Journaled quota will not work.\n");
+ ext3_msg(sb, KERN_WARNING,
+ "warning: Quota file not on filesystem root. "
+ "Journaled quota will not work.");
}
/*
@@ -2921,8 +2944,9 @@ static ssize_t ext3_quota_write(struct super_block *sb, int type,
handle_t *handle = journal_current_handle();
if (!handle) {
- printk(KERN_WARNING "EXT3-fs: Quota write (off=%Lu, len=%Lu)"
- " cancelled because transaction is not started.\n",
+ ext3_msg(sb, KERN_WARNING,
+ "warning: quota write (off=%llu, len=%llu)"
+ " cancelled because transaction is not started.",
(unsigned long long)off, (unsigned long long)len);
return -EIO;
}
--
1.6.3.3
next reply other threads:[~2009-11-21 10:25 UTC|newest]
Thread overview: 11+ messages / expand[flat|nested] mbox.gz Atom feed top
2009-11-21 10:25 Alexey Fisher [this message]
2009-11-21 23:55 ` [PATCH v1] Unify log messages in ext3 Eric Sandeen
2009-11-22 19:12 ` Alexey Fisher
2009-11-22 19:38 ` [PATCH v2] " Alexey Fisher
2009-11-22 19:42 ` Alexey Fisher
2009-11-23 10:36 ` Jan Kara
2009-11-23 11:45 ` Unify log messages in ext4 Alexey Fisher
2009-11-23 11:55 ` Jan Kara
2009-11-23 14:11 ` tytso
2009-11-23 15:11 ` Alexey Fisher
2009-11-23 16:16 ` Eric Sandeen
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1258799115-10704-1-git-send-email-bug-track@fisher-privat.net \
--to=bug-track@fisher-privat.net \
--cc=adilger@sun.com \
--cc=jack@suse.cz \
--cc=linux-ext4@vger.kernel.org \
--cc=sandeen@redhat.com \
--cc=tytso@mit.edu \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.