From mboxrd@z Thu Jan 1 00:00:00 1970 Return-path: Received: from bombadil.infradead.org ([18.85.46.34]:46942 "EHLO bombadil.infradead.org" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S933280Ab0DHT1r (ORCPT ); Thu, 8 Apr 2010 15:27:47 -0400 From: "Luis R. Rodriguez" To: linville@tuxdriver.com Cc: linux-wireless@vger.kernel.org, Senthil Balasubramanian , "Luis R. Rodriguez" Subject: [PATCH 070/102] ath9k_hw: Implement AR9003 eeprom callbacks Date: Thu, 8 Apr 2010 15:27:06 -0400 Message-Id: <1270754858-26266-71-git-send-email-lrodriguez@atheros.com> In-Reply-To: <1270754858-26266-1-git-send-email-lrodriguez@atheros.com> References: <1270754858-26266-1-git-send-email-lrodriguez@atheros.com> Sender: linux-wireless-owner@vger.kernel.org List-ID: From: Senthil Balasubramanian Signed-off-by: Senthil Balasubramanian Signed-off-by: Luis R. Rodriguez --- drivers/net/wireless/ath/ath9k/Makefile | 3 +- drivers/net/wireless/ath/ath9k/ar9003_eeprom.c | 1825 ++++++++++++++++++++++++ drivers/net/wireless/ath/ath9k/ar9003_eeprom.h | 319 +++++ drivers/net/wireless/ath/ath9k/eeprom.c | 4 +- drivers/net/wireless/ath/ath9k/eeprom.h | 11 +- drivers/net/wireless/ath/ath9k/hw.h | 1 + drivers/net/wireless/ath/ath9k/reg.h | 11 + 7 files changed, 2170 insertions(+), 4 deletions(-) create mode 100644 drivers/net/wireless/ath/ath9k/ar9003_eeprom.c create mode 100644 drivers/net/wireless/ath/ath9k/ar9003_eeprom.h diff --git a/drivers/net/wireless/ath/ath9k/Makefile b/drivers/net/wireless/ath/ath9k/Makefile index ee8f7e8..b0702fc 100644 --- a/drivers/net/wireless/ath/ath9k/Makefile +++ b/drivers/net/wireless/ath/ath9k/Makefile @@ -30,7 +30,8 @@ ath9k_hw-y:= \ ani.o \ btcoex.o \ mac.o \ - ar9003_mac.o + ar9003_mac.o \ + ar9003_eeprom.o obj-$(CONFIG_ATH9K_HW) += ath9k_hw.o diff --git a/drivers/net/wireless/ath/ath9k/ar9003_eeprom.c b/drivers/net/wireless/ath/ath9k/ar9003_eeprom.c new file mode 100644 index 0000000..e1ed846 --- /dev/null +++ b/drivers/net/wireless/ath/ath9k/ar9003_eeprom.c @@ -0,0 +1,1825 @@ +/* + * Copyright (c) 2010 Atheros Communications Inc. + * + * Permission to use, copy, modify, and/or distribute this software for any + * purpose with or without fee is hereby granted, provided that the above + * copyright notice and this permission notice appear in all copies. + * + * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES + * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR + * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES + * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN + * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF + * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. + */ + +#include "hw.h" +#include "ar9003_phy.h" +#include "ar9003_eeprom.h" + +#define COMP_HDR_LEN 4 +#define COMP_CKSUM_LEN 2 + +#define AR_CH0_TOP (0x00016288) +#define AR_CH0_TOP_XPABIASLVL (0x3) +#define AR_CH0_TOP_XPABIASLVL_S (8) + +#define AR_CH0_THERM (0x00016290) +#define AR_CH0_THERM_SPARE (0x3f) +#define AR_CH0_THERM_SPARE_S (0) + +#define AR_SWITCH_TABLE_COM_ALL (0xffff) +#define AR_SWITCH_TABLE_COM_ALL_S (0) + +#define AR_SWITCH_TABLE_COM2_ALL (0xffffff) +#define AR_SWITCH_TABLE_COM2_ALL_S (0) + +#define AR_SWITCH_TABLE_ALL (0xfff) +#define AR_SWITCH_TABLE_ALL_S (0) + +static const struct ar9300_eeprom ar9300_default = { + .eepromVersion = 2, + .templateVersion = 2, + .macAddr = {1, 2, 3, 4, 5, 6}, + .custData = {0, 0, 0, 0, 0, 0, 0, 0, 0, 0, + 0, 0, 0, 0, 0, 0, 0, 0, 0, 0}, + .baseEepHeader = { + .regDmn = {0, 0x1f}, + .txrxMask = 0x77, /* 4 bits tx and 4 bits rx */ + .opCapFlags = { + .opFlags = AR9300_OPFLAGS_11G | AR9300_OPFLAGS_11A, + .eepMisc = 0, + }, + .rfSilent = 0, + .blueToothOptions = 0, + .deviceCap = 0, + .deviceType = 5, /* takes lower byte in eeprom location */ + .pwrTableOffset = AR9300_PWR_TABLE_OFFSET, + .params_for_tuning_caps = {0, 0}, + .featureEnable = 0x0c, + /* + * bit0 - enable tx temp comp - disabled + * bit1 - enable tx volt comp - disabled + * bit2 - enable fastClock - enabled + * bit3 - enable doubling - enabled + * bit4 - enable internal regulator - disabled + */ + .miscConfiguration = 0, /* bit0 - turn down drivestrength */ + .eepromWriteEnableGpio = 3, + .wlanDisableGpio = 0, + .wlanLedGpio = 8, + .rxBandSelectGpio = 0xff, + .txrxgain = 0, + .swreg = 0, + }, + .modalHeader2G = { + /* ar9300_modal_eep_header 2g */ + /* 4 idle,t1,t2,b(4 bits per setting) */ + .antCtrlCommon = 0x110, + /* 4 ra1l1, ra2l1, ra1l2, ra2l2, ra12 */ + .antCtrlCommon2 = 0x22222, + + /* + * antCtrlChain[AR9300_MAX_CHAINS]; 6 idle, t, r, + * rx1, rx12, b (2 bits each) + */ + .antCtrlChain = {0x150, 0x150, 0x150}, + + /* + * xatten1DB[AR9300_MAX_CHAINS]; 3 xatten1_db + * for ar9280 (0xa20c/b20c 5:0) + */ + .xatten1DB = {0, 0, 0}, + + /* + * xatten1Margin[AR9300_MAX_CHAINS]; 3 xatten1_margin + * for ar9280 (0xa20c/b20c 16:12 + */ + .xatten1Margin = {0, 0, 0}, + .tempSlope = 36, + .voltSlope = 0, + + /* + * spurChans[OSPREY_EEPROM_MODAL_SPURS]; spur + * channels in usual fbin coding format + */ + .spurChans = {0, 0, 0, 0, 0}, + + /* + * noiseFloorThreshCh[AR9300_MAX_CHAINS]; 3 Check + * if the register is per chain + */ + .noiseFloorThreshCh = {-1, 0, 0}, + .ob = {1, 1, 1},/* 3 chain */ + .db_stage2 = {1, 1, 1}, /* 3 chain */ + .db_stage3 = {0, 0, 0}, + .db_stage4 = {0, 0, 0}, + .xpaBiasLvl = 0, + .txFrameToDataStart = 0x0e, + .txFrameToPaOn = 0x0e, + .txClip = 3, /* 4 bits tx_clip, 4 bits dac_scale_cck */ + .antennaGain = 0, + .switchSettling = 0x2c, + .adcDesiredSize = -30, + .txEndToXpaOff = 0, + .txEndToRxOn = 0x2, + .txFrameToXpaOn = 0xe, + .thresh62 = 28, + .futureModal = { /* [32] */ + 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, + 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 + }, + }, + .calFreqPier2G = { + FREQ2FBIN(2412, 1), + FREQ2FBIN(2437, 1), + FREQ2FBIN(2472, 1), + }, + /* ar9300_cal_data_per_freq_op_loop 2g */ + .calPierData2G = { + {{0, 0, 0, 0, 0, 0}, {0, 0, 0, 0, 0, 0}, {0, 0, 0, 0, 0, 0}}, + {{0, 0, 0, 0, 0, 0}, {0, 0, 0, 0, 0, 0}, {0, 0, 0, 0, 0, 0}}, + {{0, 0, 0, 0, 0, 0}, {0, 0, 0, 0, 0, 0}, {0, 0, 0, 0, 0, 0}}, + }, + .calTarget_freqbin_Cck = { + FREQ2FBIN(2412, 1), + FREQ2FBIN(2484, 1), + }, + .calTarget_freqbin_2G = { + FREQ2FBIN(2412, 1), + FREQ2FBIN(2437, 1), + FREQ2FBIN(2472, 1) + }, + .calTarget_freqbin_2GHT20 = { + FREQ2FBIN(2412, 1), + FREQ2FBIN(2437, 1), + FREQ2FBIN(2472, 1) + }, + .calTarget_freqbin_2GHT40 = { + FREQ2FBIN(2412, 1), + FREQ2FBIN(2437, 1), + FREQ2FBIN(2472, 1) + }, + .calTargetPowerCck = { + /* 1L-5L,5S,11L,11S */ + {{36, 36, 36, 36}}, + {{36, 36, 36, 36}}, + }, + .calTargetPower2G = { + /* 6-24,36,48,54 */ + {{32, 32, 28, 24}}, + {{32, 32, 28, 24}}, + {{32, 32, 28, 24}}, + }, + .calTargetPower2GHT20 = { + {{32, 32, 32, 32, 28, 20, 32, 32, 28, 20, 32, 32, 28, 20}}, + {{32, 32, 32, 32, 28, 20, 32, 32, 28, 20, 32, 32, 28, 20}}, + {{32, 32, 32, 32, 28, 20, 32, 32, 28, 20, 32, 32, 28, 20}}, + }, + .calTargetPower2GHT40 = { + {{32, 32, 32, 32, 28, 20, 32, 32, 28, 20, 32, 32, 28, 20}}, + {{32, 32, 32, 32, 28, 20, 32, 32, 28, 20, 32, 32, 28, 20}}, + {{32, 32, 32, 32, 28, 20, 32, 32, 28, 20, 32, 32, 28, 20}}, + }, + .ctlIndex_2G = { + 0x11, 0x12, 0x15, 0x17, 0x41, 0x42, + 0x45, 0x47, 0x31, 0x32, 0x35, 0x37, + }, + .ctl_freqbin_2G = { + { + FREQ2FBIN(2412, 1), + FREQ2FBIN(2417, 1), + FREQ2FBIN(2457, 1), + FREQ2FBIN(2462, 1) + }, + { + FREQ2FBIN(2412, 1), + FREQ2FBIN(2417, 1), + FREQ2FBIN(2462, 1), + 0xFF, + }, + + { + FREQ2FBIN(2412, 1), + FREQ2FBIN(2417, 1), + FREQ2FBIN(2462, 1), + 0xFF, + }, + { + FREQ2FBIN(2422, 1), + FREQ2FBIN(2427, 1), + FREQ2FBIN(2447, 1), + FREQ2FBIN(2452, 1) + }, + + { + /* Data[4].ctlEdges[0].bChannel */ FREQ2FBIN(2412, 1), + /* Data[4].ctlEdges[1].bChannel */ FREQ2FBIN(2417, 1), + /* Data[4].ctlEdges[2].bChannel */ FREQ2FBIN(2472, 1), + /* Data[4].ctlEdges[3].bChannel */ FREQ2FBIN(2484, 1), + }, + + { + /* Data[5].ctlEdges[0].bChannel */ FREQ2FBIN(2412, 1), + /* Data[5].ctlEdges[1].bChannel */ FREQ2FBIN(2417, 1), + /* Data[5].ctlEdges[2].bChannel */ FREQ2FBIN(2472, 1), + 0, + }, + + { + /* Data[6].ctlEdges[0].bChannel */ FREQ2FBIN(2412, 1), + /* Data[6].ctlEdges[1].bChannel */ FREQ2FBIN(2417, 1), + FREQ2FBIN(2472, 1), + 0, + }, + + { + /* Data[7].ctlEdges[0].bChannel */ FREQ2FBIN(2422, 1), + /* Data[7].ctlEdges[1].bChannel */ FREQ2FBIN(2427, 1), + /* Data[7].ctlEdges[2].bChannel */ FREQ2FBIN(2447, 1), + /* Data[7].ctlEdges[3].bChannel */ FREQ2FBIN(2462, 1), + }, + + { + /* Data[8].ctlEdges[0].bChannel */ FREQ2FBIN(2412, 1), + /* Data[8].ctlEdges[1].bChannel */ FREQ2FBIN(2417, 1), + /* Data[8].ctlEdges[2].bChannel */ FREQ2FBIN(2472, 1), + }, + + { + /* Data[9].ctlEdges[0].bChannel */ FREQ2FBIN(2412, 1), + /* Data[9].ctlEdges[1].bChannel */ FREQ2FBIN(2417, 1), + /* Data[9].ctlEdges[2].bChannel */ FREQ2FBIN(2472, 1), + 0 + }, + + { + /* Data[10].ctlEdges[0].bChannel */ FREQ2FBIN(2412, 1), + /* Data[10].ctlEdges[1].bChannel */ FREQ2FBIN(2417, 1), + /* Data[10].ctlEdges[2].bChannel */ FREQ2FBIN(2472, 1), + 0 + }, + + { + /* Data[11].ctlEdges[0].bChannel */ FREQ2FBIN(2422, 1), + /* Data[11].ctlEdges[1].bChannel */ FREQ2FBIN(2427, 1), + /* Data[11].ctlEdges[2].bChannel */ FREQ2FBIN(2447, 1), + /* Data[11].ctlEdges[3].bChannel */ + FREQ2FBIN(2462, 1), + } + }, + .ctlPowerData_2G = { + {{{60, 0}, {60, 1}, {60, 0}, {60, 0}}}, + {{{60, 0}, {60, 1}, {60, 0}, {60, 0}}}, + {{{60, 1}, {60, 0}, {60, 0}, {60, 1}}}, + + {{{60, 1}, {60, 0}, {0, 0}, {0, 0}}}, + {{{60, 0}, {60, 1}, {60, 0}, {60, 0}}}, + {{{60, 0}, {60, 1}, {60, 0}, {60, 0}}}, + + {{{60, 0}, {60, 1}, {60, 1}, {60, 0}}}, + {{{60, 0}, {60, 1}, {60, 0}, {60, 0}}}, + {{{60, 0}, {60, 1}, {60, 0}, {60, 0}}}, + + {{{60, 0}, {60, 1}, {60, 0}, {60, 0}}}, + {{{60, 0}, {60, 1}, {60, 1}, {60, 1}}}, + }, + .modalHeader5G = { + /* 4 idle,t1,t2,b (4 bits per setting) */ + .antCtrlCommon = 0x110, + /* 4 ra1l1, ra2l1, ra1l2,ra2l2,ra12 */ + .antCtrlCommon2 = 0x22222, + /* antCtrlChain 6 idle, t,r,rx1,rx12,b (2 bits each) */ + .antCtrlChain = { + 0x000, 0x000, 0x000, + }, + /* xatten1DB 3 xatten1_db for AR9280 (0xa20c/b20c 5:0) */ + .xatten1DB = {0, 0, 0}, + + /* + * xatten1Margin[AR9300_MAX_CHAINS]; 3 xatten1_margin + * for merlin (0xa20c/b20c 16:12 + */ + .xatten1Margin = {0, 0, 0}, + .tempSlope = 68, + .voltSlope = 0, + /* spurChans spur channels in usual fbin coding format */ + .spurChans = {0, 0, 0, 0, 0}, + /* noiseFloorThreshCh Check if the register is per chain */ + .noiseFloorThreshCh = {-1, 0, 0}, + .ob = {3, 3, 3}, /* 3 chain */ + .db_stage2 = {3, 3, 3}, /* 3 chain */ + .db_stage3 = {3, 3, 3}, /* doesn't exist for 2G */ + .db_stage4 = {3, 3, 3}, /* don't exist for 2G */ + .xpaBiasLvl = 0, + .txFrameToDataStart = 0x0e, + .txFrameToPaOn = 0x0e, + .txClip = 3, /* 4 bits tx_clip, 4 bits dac_scale_cck */ + .antennaGain = 0, + .switchSettling = 0x2d, + .adcDesiredSize = -30, + .txEndToXpaOff = 0, + .txEndToRxOn = 0x2, + .txFrameToXpaOn = 0xe, + .thresh62 = 28, + .futureModal = { + 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, + 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 + }, + }, + .calFreqPier5G = { + FREQ2FBIN(5180, 0), + FREQ2FBIN(5220, 0), + FREQ2FBIN(5320, 0), + FREQ2FBIN(5400, 0), + FREQ2FBIN(5500, 0), + FREQ2FBIN(5600, 0), + FREQ2FBIN(5725, 0), + FREQ2FBIN(5825, 0) + }, + .calPierData5G = { + { + {0, 0, 0, 0, 0}, + {0, 0, 0, 0, 0}, + {0, 0, 0, 0, 0}, + {0, 0, 0, 0, 0}, + {0, 0, 0, 0, 0}, + {0, 0, 0, 0, 0}, + {0, 0, 0, 0, 0}, + {0, 0, 0, 0, 0}, + }, + { + {0, 0, 0, 0, 0}, + {0, 0, 0, 0, 0}, + {0, 0, 0, 0, 0}, + {0, 0, 0, 0, 0}, + {0, 0, 0, 0, 0}, + {0, 0, 0, 0, 0}, + {0, 0, 0, 0, 0}, + {0, 0, 0, 0, 0}, + }, + { + {0, 0, 0, 0, 0}, + {0, 0, 0, 0, 0}, + {0, 0, 0, 0, 0}, + {0, 0, 0, 0, 0}, + {0, 0, 0, 0, 0}, + {0, 0, 0, 0, 0}, + {0, 0, 0, 0, 0}, + {0, 0, 0, 0, 0}, + }, + + }, + .calTarget_freqbin_5G = { + FREQ2FBIN(5180, 0), + FREQ2FBIN(5220, 0), + FREQ2FBIN(5320, 0), + FREQ2FBIN(5400, 0), + FREQ2FBIN(5500, 0), + FREQ2FBIN(5600, 0), + FREQ2FBIN(5725, 0), + FREQ2FBIN(5825, 0) + }, + .calTarget_freqbin_5GHT20 = { + FREQ2FBIN(5180, 0), + FREQ2FBIN(5240, 0), + FREQ2FBIN(5320, 0), + FREQ2FBIN(5500, 0), + FREQ2FBIN(5700, 0), + FREQ2FBIN(5745, 0), + FREQ2FBIN(5725, 0), + FREQ2FBIN(5825, 0) + }, + .calTarget_freqbin_5GHT40 = { + FREQ2FBIN(5180, 0), + FREQ2FBIN(5240, 0), + FREQ2FBIN(5320, 0), + FREQ2FBIN(5500, 0), + FREQ2FBIN(5700, 0), + FREQ2FBIN(5745, 0), + FREQ2FBIN(5725, 0), + FREQ2FBIN(5825, 0) + }, + .calTargetPower5G = { + /* 6-24,36,48,54 */ + {{20, 20, 20, 10}}, + {{20, 20, 20, 10}}, + {{20, 20, 20, 10}}, + {{20, 20, 20, 10}}, + {{20, 20, 20, 10}}, + {{20, 20, 20, 10}}, + {{20, 20, 20, 10}}, + {{20, 20, 20, 10}}, + }, + .calTargetPower5GHT20 = { + /* + * 0_8_16,1-3_9-11_17-19, + * 4,5,6,7,12,13,14,15,20,21,22,23 + */ + {{20, 20, 10, 10, 0, 0, 10, 10, 0, 0, 10, 10, 0, 0}}, + {{20, 20, 10, 10, 0, 0, 10, 10, 0, 0, 10, 10, 0, 0}}, + {{20, 20, 10, 10, 0, 0, 10, 10, 0, 0, 10, 10, 0, 0}}, + {{20, 20, 10, 10, 0, 0, 10, 10, 0, 0, 10, 10, 0, 0}}, + {{20, 20, 10, 10, 0, 0, 10, 10, 0, 0, 10, 10, 0, 0}}, + {{20, 20, 10, 10, 0, 0, 10, 10, 0, 0, 10, 10, 0, 0}}, + {{20, 20, 10, 10, 0, 0, 10, 10, 0, 0, 10, 10, 0, 0}}, + {{20, 20, 10, 10, 0, 0, 10, 10, 0, 0, 10, 10, 0, 0}}, + }, + .calTargetPower5GHT40 = { + /* + * 0_8_16,1-3_9-11_17-19, + * 4,5,6,7,12,13,14,15,20,21,22,23 + */ + {{20, 20, 10, 10, 0, 0, 10, 10, 0, 0, 10, 10, 0, 0}}, + {{20, 20, 10, 10, 0, 0, 10, 10, 0, 0, 10, 10, 0, 0}}, + {{20, 20, 10, 10, 0, 0, 10, 10, 0, 0, 10, 10, 0, 0}}, + {{20, 20, 10, 10, 0, 0, 10, 10, 0, 0, 10, 10, 0, 0}}, + {{20, 20, 10, 10, 0, 0, 10, 10, 0, 0, 10, 10, 0, 0}}, + {{20, 20, 10, 10, 0, 0, 10, 10, 0, 0, 10, 10, 0, 0}}, + {{20, 20, 10, 10, 0, 0, 10, 10, 0, 0, 10, 10, 0, 0}}, + {{20, 20, 10, 10, 0, 0, 10, 10, 0, 0, 10, 10, 0, 0}}, + }, + .ctlIndex_5G = { + 0x10, 0x16, 0x18, 0x40, 0x46, + 0x48, 0x30, 0x36, 0x38 + }, + .ctl_freqbin_5G = { + { + /* Data[0].ctlEdges[0].bChannel */ FREQ2FBIN(5180, 0), + /* Data[0].ctlEdges[1].bChannel */ FREQ2FBIN(5260, 0), + /* Data[0].ctlEdges[2].bChannel */ FREQ2FBIN(5280, 0), + /* Data[0].ctlEdges[3].bChannel */ FREQ2FBIN(5500, 0), + /* Data[0].ctlEdges[4].bChannel */ FREQ2FBIN(5600, 0), + /* Data[0].ctlEdges[5].bChannel */ FREQ2FBIN(5700, 0), + /* Data[0].ctlEdges[6].bChannel */ FREQ2FBIN(5745, 0), + /* Data[0].ctlEdges[7].bChannel */ FREQ2FBIN(5825, 0) + }, + { + /* Data[1].ctlEdges[0].bChannel */ FREQ2FBIN(5180, 0), + /* Data[1].ctlEdges[1].bChannel */ FREQ2FBIN(5260, 0), + /* Data[1].ctlEdges[2].bChannel */ FREQ2FBIN(5280, 0), + /* Data[1].ctlEdges[3].bChannel */ FREQ2FBIN(5500, 0), + /* Data[1].ctlEdges[4].bChannel */ FREQ2FBIN(5520, 0), + /* Data[1].ctlEdges[5].bChannel */ FREQ2FBIN(5700, 0), + /* Data[1].ctlEdges[6].bChannel */ FREQ2FBIN(5745, 0), + /* Data[1].ctlEdges[7].bChannel */ FREQ2FBIN(5825, 0) + }, + + { + /* Data[2].ctlEdges[0].bChannel */ FREQ2FBIN(5190, 0), + /* Data[2].ctlEdges[1].bChannel */ FREQ2FBIN(5230, 0), + /* Data[2].ctlEdges[2].bChannel */ FREQ2FBIN(5270, 0), + /* Data[2].ctlEdges[3].bChannel */ FREQ2FBIN(5310, 0), + /* Data[2].ctlEdges[4].bChannel */ FREQ2FBIN(5510, 0), + /* Data[2].ctlEdges[5].bChannel */ FREQ2FBIN(5550, 0), + /* Data[2].ctlEdges[6].bChannel */ FREQ2FBIN(5670, 0), + /* Data[2].ctlEdges[7].bChannel */ FREQ2FBIN(5755, 0) + }, + + { + /* Data[3].ctlEdges[0].bChannel */ FREQ2FBIN(5180, 0), + /* Data[3].ctlEdges[1].bChannel */ FREQ2FBIN(5200, 0), + /* Data[3].ctlEdges[2].bChannel */ FREQ2FBIN(5260, 0), + /* Data[3].ctlEdges[3].bChannel */ FREQ2FBIN(5320, 0), + /* Data[3].ctlEdges[4].bChannel */ FREQ2FBIN(5500, 0), + /* Data[3].ctlEdges[5].bChannel */ FREQ2FBIN(5700, 0), + /* Data[3].ctlEdges[6].bChannel */ 0xFF, + /* Data[3].ctlEdges[7].bChannel */ 0xFF, + }, + + { + /* Data[4].ctlEdges[0].bChannel */ FREQ2FBIN(5180, 0), + /* Data[4].ctlEdges[1].bChannel */ FREQ2FBIN(5260, 0), + /* Data[4].ctlEdges[2].bChannel */ FREQ2FBIN(5500, 0), + /* Data[4].ctlEdges[3].bChannel */ FREQ2FBIN(5700, 0), + /* Data[4].ctlEdges[4].bChannel */ 0xFF, + /* Data[4].ctlEdges[5].bChannel */ 0xFF, + /* Data[4].ctlEdges[6].bChannel */ 0xFF, + /* Data[4].ctlEdges[7].bChannel */ 0xFF, + }, + + { + /* Data[5].ctlEdges[0].bChannel */ FREQ2FBIN(5190, 0), + /* Data[5].ctlEdges[1].bChannel */ FREQ2FBIN(5270, 0), + /* Data[5].ctlEdges[2].bChannel */ FREQ2FBIN(5310, 0), + /* Data[5].ctlEdges[3].bChannel */ FREQ2FBIN(5510, 0), + /* Data[5].ctlEdges[4].bChannel */ FREQ2FBIN(5590, 0), + /* Data[5].ctlEdges[5].bChannel */ FREQ2FBIN(5670, 0), + /* Data[5].ctlEdges[6].bChannel */ 0xFF, + /* Data[5].ctlEdges[7].bChannel */ 0xFF + }, + + { + /* Data[6].ctlEdges[0].bChannel */ FREQ2FBIN(5180, 0), + /* Data[6].ctlEdges[1].bChannel */ FREQ2FBIN(5200, 0), + /* Data[6].ctlEdges[2].bChannel */ FREQ2FBIN(5220, 0), + /* Data[6].ctlEdges[3].bChannel */ FREQ2FBIN(5260, 0), + /* Data[6].ctlEdges[4].bChannel */ FREQ2FBIN(5500, 0), + /* Data[6].ctlEdges[5].bChannel */ FREQ2FBIN(5600, 0), + /* Data[6].ctlEdges[6].bChannel */ FREQ2FBIN(5700, 0), + /* Data[6].ctlEdges[7].bChannel */ FREQ2FBIN(5745, 0) + }, + + { + /* Data[7].ctlEdges[0].bChannel */ FREQ2FBIN(5180, 0), + /* Data[7].ctlEdges[1].bChannel */ FREQ2FBIN(5260, 0), + /* Data[7].ctlEdges[2].bChannel */ FREQ2FBIN(5320, 0), + /* Data[7].ctlEdges[3].bChannel */ FREQ2FBIN(5500, 0), + /* Data[7].ctlEdges[4].bChannel */ FREQ2FBIN(5560, 0), + /* Data[7].ctlEdges[5].bChannel */ FREQ2FBIN(5700, 0), + /* Data[7].ctlEdges[6].bChannel */ FREQ2FBIN(5745, 0), + /* Data[7].ctlEdges[7].bChannel */ FREQ2FBIN(5825, 0) + }, + + { + /* Data[8].ctlEdges[0].bChannel */ FREQ2FBIN(5190, 0), + /* Data[8].ctlEdges[1].bChannel */ FREQ2FBIN(5230, 0), + /* Data[8].ctlEdges[2].bChannel */ FREQ2FBIN(5270, 0), + /* Data[8].ctlEdges[3].bChannel */ FREQ2FBIN(5510, 0), + /* Data[8].ctlEdges[4].bChannel */ FREQ2FBIN(5550, 0), + /* Data[8].ctlEdges[5].bChannel */ FREQ2FBIN(5670, 0), + /* Data[8].ctlEdges[6].bChannel */ FREQ2FBIN(5755, 0), + /* Data[8].ctlEdges[7].bChannel */ FREQ2FBIN(5795, 0) + } + }, + .ctlPowerData_5G = { + { + { + {60, 1}, {60, 1}, {60, 1}, {60, 1}, + {60, 1}, {60, 1}, {60, 1}, {60, 0}, + } + }, + { + { + {60, 1}, {60, 1}, {60, 1}, {60, 1}, + {60, 1}, {60, 1}, {60, 1}, {60, 0}, + } + }, + { + { + {60, 0}, {60, 1}, {60, 0}, {60, 1}, + {60, 1}, {60, 1}, {60, 1}, {60, 1}, + } + }, + { + { + {60, 0}, {60, 1}, {60, 1}, {60, 0}, + {60, 1}, {60, 0}, {60, 0}, {60, 0}, + } + }, + { + { + {60, 1}, {60, 1}, {60, 1}, {60, 0}, + {60, 0}, {60, 0}, {60, 0}, {60, 0}, + } + }, + { + { + {60, 1}, {60, 1}, {60, 1}, {60, 1}, + {60, 1}, {60, 0}, {60, 0}, {60, 0}, + } + }, + { + { + {60, 1}, {60, 1}, {60, 1}, {60, 1}, + {60, 1}, {60, 1}, {60, 1}, {60, 1}, + } + }, + { + { + {60, 1}, {60, 1}, {60, 0}, {60, 1}, + {60, 1}, {60, 1}, {60, 1}, {60, 0}, + } + }, + { + { + {60, 1}, {60, 0}, {60, 1}, {60, 1}, + {60, 1}, {60, 1}, {60, 0}, {60, 1}, + } + }, + } +}; + +static int ath9k_hw_ar9300_check_eeprom(struct ath_hw *ah) +{ + return 0; +} + +static u32 ath9k_hw_ar9300_get_eeprom(struct ath_hw *ah, + enum eeprom_param param) +{ + struct ar9300_eeprom *eep = &ah->eeprom.ar9300_eep; + struct ar9300_base_eep_hdr *pBase = &eep->baseEepHeader; + + switch (param) { + case EEP_MAC_LSW: + return eep->macAddr[0] << 8 | eep->macAddr[1]; + case EEP_MAC_MID: + return eep->macAddr[2] << 8 | eep->macAddr[3]; + case EEP_MAC_MSW: + return eep->macAddr[4] << 8 | eep->macAddr[5]; + case EEP_REG_0: + return pBase->regDmn[0]; + case EEP_REG_1: + return pBase->regDmn[1]; + case EEP_OP_CAP: + return pBase->deviceCap; + case EEP_OP_MODE: + return pBase->opCapFlags.opFlags; + case EEP_RF_SILENT: + return pBase->rfSilent; + case EEP_TX_MASK: + return (pBase->txrxMask >> 4) & 0xf; + case EEP_RX_MASK: + return pBase->txrxMask & 0xf; + case EEP_DRIVE_STRENGTH: +#define AR9300_EEP_BASE_DRIV_STRENGTH 0x1 + return pBase->miscConfiguration & AR9300_EEP_BASE_DRIV_STRENGTH; + case EEP_INTERNAL_REGULATOR: + /* Bit 4 is internal regulator flag */ + return ((pBase->featureEnable & 0x10) >> 4); + case EEP_SWREG: + return (pBase->swreg); + default: + return 0; + } +} + +#ifdef __BIG_ENDIAN +static void ar9300_swap_eeprom(struct ar9300_eeprom *eep) +{ + u32 dword; + u16 word; + int i; + + word = swab16(eep->baseEepHeader.regDmn[0]); + eep->baseEepHeader.regDmn[0] = word; + + word = swab16(eep->baseEepHeader.regDmn[1]); + eep->baseEepHeader.regDmn[1] = word; + + dword = swab32(eep->modalHeader2G.antCtrlCommon); + eep->modalHeader2G.antCtrlCommon = dword; + + dword = swab32(eep->modalHeader2G.antCtrlCommon2); + eep->modalHeader2G.antCtrlCommon2 = dword; + + dword = swab32(eep->modalHeader5G.antCtrlCommon); + eep->modalHeader5G.antCtrlCommon = dword; + + dword = swab32(eep->modalHeader5G.antCtrlCommon2); + eep->modalHeader5G.antCtrlCommon2 = dword; + + for (i = 0; i < AR9300_MAX_CHAINS; i++) { + word = swab16(eep->modalHeader2G.antCtrlChain[i]); + eep->modalHeader2G.antCtrlChain[i] = word; + + word = swab16(eep->modalHeader5G.antCtrlChain[i]); + eep->modalHeader5G.antCtrlChain[i] = word; + } +} +#endif + +static bool ar9300_hw_read_eeprom(struct ath_hw *ah, + long address, u8 * buffer, int many) +{ + int i; + u8 value[2]; + unsigned long eepAddr; + unsigned long byteAddr; + u16 *svalue; + struct ath_common *common = ath9k_hw_common(ah); + + if ((address < 0) || ((address + many) > AR9300_EEPROM_SIZE - 1)) { + ath_print(common, ATH_DBG_EEPROM, + "eeprom address not in range \n"); + return false; + } + + for (i = 0; i < many; i++) { + eepAddr = (u16) (address + i) / 2; + byteAddr = (u16) (address + i) % 2; + svalue = (u16 *) value; + if (!ath9k_hw_nvram_read(common, eepAddr, svalue)) { + ath_print(common, ATH_DBG_EEPROM, + "unable to read eeprom region\n"); + return false; + } + buffer[i] = value[byteAddr]; + } + + return true; +} + +static bool ar9300_read_eeprom(struct ath_hw *ah, + int address, u8 * buffer, int many) +{ + int it; + + for (it = 0; it < many; it++) + if (!ar9300_hw_read_eeprom(ah, (address - it), (buffer + it), 1)) + return false; + return true; +} + +static void ar9300_comp_hdr_unpack(u8 * best, int *code, int *reference, + int *length, int *major, int *minor) +{ + unsigned long value[4]; + + value[0] = best[0]; + value[1] = best[1]; + value[2] = best[2]; + value[3] = best[3]; + *code = ((value[0] >> 5) & 0x0007); + *reference = (value[0] & 0x001f) | ((value[1] >> 2) & 0x0020); + *length = ((value[1] << 4) & 0x07f0) | ((value[2] >> 4) & 0x000f); + *major = (value[2] & 0x000f); + *minor = (value[3] & 0x00ff); +} + +static u16 ar9300_comp_cksum(u8 * data, int dsize) +{ + int it, checksum = 0; + + for (it = 0; it < dsize; it++) { + checksum += data[it]; + checksum &= 0xffff; + } + + return checksum; +} + +static bool ar9300_uncompress_block(struct ath_hw *ah, + u8 *mptr, + int mdataSize, + u8 *block, + int size) +{ + int it; + int spot; + int offset; + int length; + struct ath_common *common = ath9k_hw_common(ah); + + spot = 0; + + for (it = 0; it < size; it += (length+2)) { + offset = block[it]; + offset &= 0xff; + spot += offset; + length = block[it+1]; + length &= 0xff; + + if (length > 0 && spot >= 0 && spot+length < mdataSize) { + ath_print(common, ATH_DBG_EEPROM, + "Restore at %d: spot=%d offset=%d length=%d\n", + it, spot, offset, length); + memcpy(&mptr[spot],&block[it+2],length); + spot += length; + } else if (length > 0) { + ath_print(common, ATH_DBG_EEPROM, + "Bad restore at %d: spot=%d offset=%d length=%d\n", + it, spot, offset, length); + return false; + } + } + return true; +} + +static int ar9300_compress_decision(struct ath_hw *ah, + int it, + int code, + int reference, + u8 * mptr, + u8 * word, int length, int mdata_size) +{ + struct ath_common *common = ath9k_hw_common(ah); + u8 *dptr; + + switch (code) { + case _CompressNone: + if (length != mdata_size) { + ath_print(common, ATH_DBG_EEPROM, + "EEPROM structure size mismatch" + "memory=%d eeprom=%d\n", mdata_size, length); + return -1; + } + memcpy(mptr, (u8 *) (word + COMP_HDR_LEN), length); + ath_print(common, ATH_DBG_EEPROM, "restored eeprom %d:" + " uncompressed, length %d\n", it, length); + break; + case _CompressBlock: + if (reference == 0) { + dptr = mptr; + } else { + if (reference != 2) { + ath_print(common, ATH_DBG_EEPROM, + "cant find reference eeprom" + "struct %d\n", reference); + return -1; + } + memcpy(mptr, &ar9300_default, mdata_size); + } + ath_print(common, ATH_DBG_EEPROM, + "restore eeprom %d: block, reference %d," + " length %d\n", it, reference, length); + ar9300_uncompress_block(ah, mptr, mdata_size, + (u8 *) (word + COMP_HDR_LEN), length); + break; + default: + ath_print(common, ATH_DBG_EEPROM, "unknown compression" + " code %d\n", code); + return -1; + } + return 0; +} + +/* + * Read the configuration data from the eeprom. + * The data can be put in any specified memory buffer. + * + * Returns -1 on error. + * Returns address of next memory location on success. + */ +static int ar9300_eeprom_restore_internal(struct ath_hw *ah, + u8 * mptr, int mdata_size) +{ +#define MDEFAULT 15 +#define MSTATE 100 + int cptr; + u8 *word; + int code; + int reference, length, major, minor; + int osize; + int it; + u16 checksum, mchecksum; + struct ath_common *common = ath9k_hw_common(ah); + + word = kzalloc(2048, GFP_KERNEL); + if (!word) + return -1; + + memcpy(mptr, &ar9300_default, mdata_size); + + cptr = AR9300_BASE_ADDR; + for (it = 0; it < MSTATE; it++) { + if (!ar9300_read_eeprom(ah, cptr, word, COMP_HDR_LEN)) + goto fail; + + if ((word[0] == 0 && word[1] == 0 && word[2] == 0 && + word[3] == 0) || (word[0] == 0xff && word[1] == 0xff + && word[2] == 0xff && word[3] == 0xff)) + break; + + ar9300_comp_hdr_unpack(word, &code, &reference, + &length, &major, &minor); + ath_print(common, ATH_DBG_EEPROM, + "Found block at %x: code=%d ref=%d" + "length=%d major=%d minor=%d\n", cptr, code, + reference, length, major, minor); + if (length >= 1024) { + ath_print(common, ATH_DBG_EEPROM, + "Skipping bad header\n"); + cptr -= COMP_HDR_LEN; + continue; + } + + osize = length; + ar9300_read_eeprom(ah, cptr, word, + COMP_HDR_LEN + osize + COMP_CKSUM_LEN); + checksum = ar9300_comp_cksum(&word[COMP_HDR_LEN], length); + mchecksum = word[COMP_HDR_LEN + osize] | + (word[COMP_HDR_LEN + osize + 1] << 8); + ath_print(common, ATH_DBG_EEPROM, + "checksum %x %x\n", checksum, mchecksum); + if (checksum == mchecksum) { + ar9300_compress_decision(ah, it, code, reference, mptr, + word, length, mdata_size); + } else { + ath_print(common, ATH_DBG_EEPROM, + "skipping block with bad checksum\n"); + } + cptr -= (COMP_HDR_LEN + osize + COMP_CKSUM_LEN); + } + + kfree(word); + return cptr; + +fail: + kfree(word); + return -1; +} + +/* + * Restore the configuration structure by reading the eeprom. + * This function destroys any existing in-memory structure + * content. + */ +static bool ath9k_hw_ar9300_fill_eeprom(struct ath_hw *ah) +{ + u8 *mptr = NULL; + int mdata_size; + + mptr = (u8 *) & ah->eeprom.ar9300_eep; + mdata_size = sizeof(struct ar9300_eeprom); + + if (mptr && mdata_size > 0) { + /* At this point, mptr points to the eeprom data structure + * in it's "default" state. If this is big endian, swap the + * data structures back to "little endian" + */ + /* First swap, default to Little Endian */ +#ifdef __BIG_ENDIAN + ar9300_swap_eeprom((struct ar9300_eeprom *)mptr); +#endif + if (ar9300_eeprom_restore_internal(ah, mptr, mdata_size) >= 0) + return true; + + /* Second Swap, back to Big Endian */ +#ifdef __BIG_ENDIAN + ar9300_swap_eeprom((struct ar9300_eeprom *)mptr); +#endif + } + return false; +} + +/* XXX: review hardware docs */ +static int ath9k_hw_ar9300_get_eeprom_ver(struct ath_hw *ah) +{ + return ah->eeprom.ar9300_eep.eepromVersion; +} + +/* XXX: could be read from the eepromVersion, not sure yet */ +static int ath9k_hw_ar9300_get_eeprom_rev(struct ath_hw *ah) +{ + return 0; +} + +static u8 ath9k_hw_ar9300_get_num_ant_config(struct ath_hw *ah, + enum ieee80211_band freq_band) +{ + return 1; +} + +static u16 ath9k_hw_ar9300_get_eeprom_antenna_cfg(struct ath_hw *ah, + struct ath9k_channel *chan) +{ + return -EINVAL; +} + +static s32 ar9003_hw_xpa_bias_level_get(struct ath_hw *ah, bool is2ghz) +{ + struct ar9300_eeprom *eep = &ah->eeprom.ar9300_eep; + + if (is2ghz) + return eep->modalHeader2G.xpaBiasLvl; + else + return eep->modalHeader5G.xpaBiasLvl; +} + +static void ar9003_hw_xpa_bias_level_apply(struct ath_hw *ah, bool is2ghz) +{ + int bias = ar9003_hw_xpa_bias_level_get(ah, is2ghz); + REG_RMW_FIELD(ah, AR_CH0_TOP, AR_CH0_TOP_XPABIASLVL, (bias & 0x3)); + REG_RMW_FIELD(ah, AR_CH0_THERM, AR_CH0_THERM_SPARE, + ((bias >> 2) & 0x3)); +} + +static u32 ar9003_hw_ant_ctrl_common_get(struct ath_hw *ah, bool is2ghz) +{ + struct ar9300_eeprom *eep = &ah->eeprom.ar9300_eep; + + if (is2ghz) + return eep->modalHeader2G.antCtrlCommon; + else + return eep->modalHeader5G.antCtrlCommon; +} + +static u32 ar9003_hw_ant_ctrl_common_2_get(struct ath_hw *ah, bool is2ghz) +{ + struct ar9300_eeprom *eep = &ah->eeprom.ar9300_eep; + + if (is2ghz) + return eep->modalHeader2G.antCtrlCommon2; + else + return eep->modalHeader5G.antCtrlCommon2; +} + +static u16 ar9003_hw_ant_ctrl_chain_get(struct ath_hw *ah, int chain, bool is2ghz) +{ + struct ar9300_eeprom *eep = &ah->eeprom.ar9300_eep; + + if (chain >= 0 && chain < AR9300_MAX_CHAINS) { + if (is2ghz) + return eep->modalHeader2G.antCtrlChain[chain]; + else + return eep->modalHeader5G.antCtrlChain[chain]; + } + + return 0; +} + +static void ar9003_hw_ant_ctrl_apply(struct ath_hw *ah, bool is2ghz) +{ + u32 value = ar9003_hw_ant_ctrl_common_get(ah, is2ghz); + REG_RMW_FIELD(ah, AR_PHY_SWITCH_COM, AR_SWITCH_TABLE_COM_ALL, value); + + value = ar9003_hw_ant_ctrl_common_2_get(ah, is2ghz); + REG_RMW_FIELD(ah, AR_PHY_SWITCH_COM_2, AR_SWITCH_TABLE_COM2_ALL, value); + + value = ar9003_hw_ant_ctrl_chain_get(ah, 0, is2ghz); + REG_RMW_FIELD(ah, AR_PHY_SWITCH_CHAIN_0, AR_SWITCH_TABLE_ALL, value); + + value = ar9003_hw_ant_ctrl_chain_get(ah, 1, is2ghz); + REG_RMW_FIELD(ah, AR_PHY_SWITCH_CHAIN_1, AR_SWITCH_TABLE_ALL, value); + + value = ar9003_hw_ant_ctrl_chain_get(ah, 2, is2ghz); + REG_RMW_FIELD(ah, AR_PHY_SWITCH_CHAIN_2, AR_SWITCH_TABLE_ALL, value); +} + +static void ar9003_hw_drive_strength_apply(struct ath_hw *ah) +{ + int drive_strength; + unsigned long reg; + + drive_strength = ath9k_hw_ar9300_get_eeprom(ah, EEP_DRIVE_STRENGTH); + + if (!drive_strength) + return; + + reg = REG_READ(ah, AR_PHY_65NM_CH0_BIAS1); + reg &= ~0x00ffffc0; + reg |= 0x5 << 21; + reg |= 0x5 << 18; + reg |= 0x5 << 15; + reg |= 0x5 << 12; + reg |= 0x5 << 9; + reg |= 0x5 << 6; + REG_WRITE(ah, AR_PHY_65NM_CH0_BIAS1, reg); + + reg = REG_READ(ah, AR_PHY_65NM_CH0_BIAS2); + reg &= ~0xffffffe0; + reg |= 0x5 << 29; + reg |= 0x5 << 26; + reg |= 0x5 << 23; + reg |= 0x5 << 20; + reg |= 0x5 << 17; + reg |= 0x5 << 14; + reg |= 0x5 << 11; + reg |= 0x5 << 8; + reg |= 0x5 << 5; + REG_WRITE(ah, AR_PHY_65NM_CH0_BIAS2, reg); + + reg = REG_READ(ah, AR_PHY_65NM_CH0_BIAS4); + reg &= ~0xff800000; + reg |= 0x5 << 29; + reg |= 0x5 << 26; + reg |= 0x5 << 23; + REG_WRITE(ah, AR_PHY_65NM_CH0_BIAS4, reg); +} + +static void ar9003_hw_internal_regulator_apply(struct ath_hw *ah) +{ + int internal_regulator = + ath9k_hw_ar9300_get_eeprom(ah, EEP_INTERNAL_REGULATOR); + if (!internal_regulator) { + /* Internal regulator is ON. Write swreg register. */ + int swreg = ath9k_hw_ar9300_get_eeprom(ah, EEP_SWREG); + REG_WRITE(ah, AR_RTC_REG_CONTROL1, + REG_READ(ah, AR_RTC_REG_CONTROL1) & + (~AR_RTC_REG_CONTROL1_SWREG_PROGRAM)); + REG_WRITE(ah, AR_RTC_REG_CONTROL0, swreg); + /* Set REG_CONTROL1.SWREG_PROGRAM */ + REG_WRITE(ah, AR_RTC_REG_CONTROL1, + REG_READ(ah, + AR_RTC_REG_CONTROL1) | + AR_RTC_REG_CONTROL1_SWREG_PROGRAM); + } else { + REG_WRITE(ah, AR_RTC_SLEEP_CLK, + (REG_READ(ah, + AR_RTC_SLEEP_CLK) | + AR_RTC_FORCE_SWREG_PRD)); + } +} + +static void ath9k_hw_ar9300_set_board_values(struct ath_hw *ah, + struct ath9k_channel *chan) +{ + ar9003_hw_xpa_bias_level_apply(ah, IS_CHAN_2GHZ(chan)); + ar9003_hw_ant_ctrl_apply(ah, IS_CHAN_2GHZ(chan)); + ar9003_hw_drive_strength_apply(ah); + ar9003_hw_internal_regulator_apply(ah); +} + +static void ath9k_hw_ar9300_set_addac(struct ath_hw *ah, + struct ath9k_channel *chan) +{ +} + +/* + * Returns the interpolated y value corresponding to the specified x value + * from the np ordered pairs of data (px,py). + * The pairs do not have to be in any order. + * If the specified x value is less than any of the px, + * the returned y value is equal to the py for the lowest px. + * If the specified x value is greater than any of the px, + * the returned y value is equal to the py for the highest px. + */ +static int ar9003_hw_power_interpolate(int32_t x, + int32_t * px, int32_t * py, u_int16_t np) +{ + int ip = 0; + int lx = 0, ly = 0, lhave = 0; + int hx = 0, hy = 0, hhave = 0; + int dx = 0; + int y = 0; + + lhave = 0; + hhave = 0; + + /* identify best lower and higher x calibration measurement */ + for (ip = 0; ip < np; ip++) { + dx = x - px[ip]; + + /* this measurement is higher than our desired x */ + if (dx <= 0) { + if (!hhave || dx > (x - hx)) { + /* new best higher x measurement */ + hx = px[ip]; + hy = py[ip]; + hhave = 1; + } + } + /* this measurement is lower than our desired x */ + if (dx >= 0) { + if (!lhave || dx < (x - lx)) { + /* new best lower x measurement */ + lx = px[ip]; + ly = py[ip]; + lhave = 1; + } + } + } + + /* the low x is good */ + if (lhave) { + /* so is the high x */ + if (hhave) { + /* they're the same, so just pick one */ + if (hx == lx) + y = ly; + else /* interpolate */ + y = ly + (((x - lx) * (hy - ly)) / (hx - lx)); + } else /* only low is good, use it */ + y = ly; + } else if (hhave) /* only high is good, use it */ + y = hy; + else /* nothing is good,this should never happen unless np=0, ???? */ + y = -(1 << 30); + return y; +} + +static u8 ar9003_hw_eeprom_get_tgt_pwr(struct ath_hw *ah, + u16 rateIndex, u16 freq, bool is2GHz) +{ + u16 numPiers, i; + s32 targetPowerArray[AR9300_NUM_5G_20_TARGET_POWERS]; + s32 freqArray[AR9300_NUM_5G_20_TARGET_POWERS]; + struct ar9300_eeprom *eep = &ah->eeprom.ar9300_eep; + struct cal_tgt_pow_legacy *pEepromTargetPwr; + u8 *pFreqBin; + + if (is2GHz) { + numPiers = AR9300_NUM_5G_20_TARGET_POWERS; + pEepromTargetPwr = eep->calTargetPower2G; + pFreqBin = eep->calTarget_freqbin_2G; + } else { + numPiers = AR9300_NUM_5G_20_TARGET_POWERS; + pEepromTargetPwr = eep->calTargetPower5G; + pFreqBin = eep->calTarget_freqbin_5G; + } + + /* + * create array of channels and targetpower from + * targetpower piers stored on eeprom + */ + for (i = 0; i < numPiers; i++) { + freqArray[i] = FBIN2FREQ(pFreqBin[i], is2GHz); + targetPowerArray[i] = pEepromTargetPwr[i].tPow2x[rateIndex]; + } + + /* interpolate to get target power for given frequency */ + return ((u8) ar9003_hw_power_interpolate((s32) freq, + freqArray, + targetPowerArray, numPiers)); +} + +static u8 ar9003_hw_eeprom_get_ht20_tgt_pwr(struct ath_hw *ah, + u16 rateIndex, + u16 freq, bool is2GHz) +{ + u16 numPiers, i; + s32 targetPowerArray[AR9300_NUM_5G_20_TARGET_POWERS]; + s32 freqArray[AR9300_NUM_5G_20_TARGET_POWERS]; + struct ar9300_eeprom *eep = &ah->eeprom.ar9300_eep; + struct cal_tgt_pow_ht *pEepromTargetPwr; + u8 *pFreqBin; + + if (is2GHz) { + numPiers = AR9300_NUM_5G_20_TARGET_POWERS; + pEepromTargetPwr = eep->calTargetPower2GHT20; + pFreqBin = eep->calTarget_freqbin_2GHT20; + } else { + numPiers = AR9300_NUM_5G_20_TARGET_POWERS; + pEepromTargetPwr = eep->calTargetPower5GHT20; + pFreqBin = eep->calTarget_freqbin_5GHT20; + } + + /* + * create array of channels and targetpower + * from targetpower piers stored on eeprom + */ + for (i = 0; i < numPiers; i++) { + freqArray[i] = FBIN2FREQ(pFreqBin[i], is2GHz); + targetPowerArray[i] = pEepromTargetPwr[i].tPow2x[rateIndex]; + } + + /* interpolate to get target power for given frequency */ + return ((u8) ar9003_hw_power_interpolate((s32) freq, + freqArray, + targetPowerArray, numPiers)); +} + +static u8 ar9003_hw_eeprom_get_ht40_tgt_pwr(struct ath_hw *ah, + u16 rateIndex, + u16 freq, bool is2GHz) +{ + u16 numPiers, i; + s32 targetPowerArray[AR9300_NUM_5G_40_TARGET_POWERS]; + s32 freqArray[AR9300_NUM_5G_40_TARGET_POWERS]; + struct ar9300_eeprom *eep = &ah->eeprom.ar9300_eep; + struct cal_tgt_pow_ht *pEepromTargetPwr; + u8 *pFreqBin; + + if (is2GHz) { + numPiers = AR9300_NUM_2G_40_TARGET_POWERS; + pEepromTargetPwr = eep->calTargetPower2GHT40; + pFreqBin = eep->calTarget_freqbin_2GHT40; + } else { + numPiers = AR9300_NUM_5G_40_TARGET_POWERS; + pEepromTargetPwr = eep->calTargetPower5GHT40; + pFreqBin = eep->calTarget_freqbin_5GHT40; + } + + /* + * create array of channels and targetpower from + * targetpower piers stored on eeprom + */ + for (i = 0; i < numPiers; i++) { + freqArray[i] = FBIN2FREQ(pFreqBin[i], is2GHz); + targetPowerArray[i] = pEepromTargetPwr[i].tPow2x[rateIndex]; + } + + /* interpolate to get target power for given frequency */ + return ((u8) ar9003_hw_power_interpolate((s32) freq, + freqArray, + targetPowerArray, numPiers)); +} + +static u8 ar9003_hw_eeprom_get_cck_tgt_pwr(struct ath_hw *ah, + u16 rateIndex, u16 freq) +{ + u16 numPiers = AR9300_NUM_2G_CCK_TARGET_POWERS, i; + s32 targetPowerArray[AR9300_NUM_2G_CCK_TARGET_POWERS]; + s32 freqArray[AR9300_NUM_2G_CCK_TARGET_POWERS]; + struct ar9300_eeprom *eep = &ah->eeprom.ar9300_eep; + struct cal_tgt_pow_legacy *pEepromTargetPwr = eep->calTargetPowerCck; + u8 *pFreqBin = eep->calTarget_freqbin_Cck; + + /* + * create array of channels and targetpower from + * targetpower piers stored on eeprom + */ + for (i = 0; i < numPiers; i++) { + freqArray[i] = FBIN2FREQ(pFreqBin[i], 1); + targetPowerArray[i] = pEepromTargetPwr[i].tPow2x[rateIndex]; + } + + /* interpolate to get target power for given frequency */ + return ((u8) ar9003_hw_power_interpolate((s32) freq, + freqArray, + targetPowerArray, numPiers)); +} + +/* Set tx power registers to array of values passed in */ +static int ar9003_hw_tx_power_regwrite(struct ath_hw *ah, u8 * pPwrArray) +{ +#define POW_SM(_r, _s) (((_r) & 0x3f) << (_s)) + /* make sure forced gain is not set */ + REG_WRITE(ah, 0xa458, 0); + + /* Write the OFDM power per rate set */ + + /* 6 (LSB), 9, 12, 18 (MSB) */ + REG_WRITE(ah, 0xa3c0, + POW_SM(pPwrArray[ALL_TARGET_LEGACY_6_24], 24) | + POW_SM(pPwrArray[ALL_TARGET_LEGACY_6_24], 16) | + POW_SM(pPwrArray[ALL_TARGET_LEGACY_6_24], 8) | + POW_SM(pPwrArray[ALL_TARGET_LEGACY_6_24], 0)); + + /* 24 (LSB), 36, 48, 54 (MSB) */ + REG_WRITE(ah, 0xa3c4, + POW_SM(pPwrArray[ALL_TARGET_LEGACY_54], 24) | + POW_SM(pPwrArray[ALL_TARGET_LEGACY_48], 16) | + POW_SM(pPwrArray[ALL_TARGET_LEGACY_36], 8) | + POW_SM(pPwrArray[ALL_TARGET_LEGACY_6_24], 0)); + + /* Write the CCK power per rate set */ + + /* 1L (LSB), reserved, 2L, 2S (MSB) */ + REG_WRITE(ah, 0xa3c8, + POW_SM(pPwrArray[ALL_TARGET_LEGACY_1L_5L], 24) | + POW_SM(pPwrArray[ALL_TARGET_LEGACY_1L_5L], 16) | + // POW_SM(txPowerTimes2, 8) | /* this is reserved for AR9003 */ + POW_SM(pPwrArray[ALL_TARGET_LEGACY_1L_5L], 0)); + + /* 5.5L (LSB), 5.5S, 11L, 11S (MSB) */ + REG_WRITE(ah, 0xa3cc, + POW_SM(pPwrArray[ALL_TARGET_LEGACY_11S], 24) | + POW_SM(pPwrArray[ALL_TARGET_LEGACY_11L], 16) | + POW_SM(pPwrArray[ALL_TARGET_LEGACY_5S], 8) | + POW_SM(pPwrArray[ALL_TARGET_LEGACY_1L_5L], 0) + ); + + /* Write the HT20 power per rate set */ + + /* 0/8/16 (LSB), 1-3/9-11/17-19, 4, 5 (MSB) */ + REG_WRITE(ah, 0xa3d0, + POW_SM(pPwrArray[ALL_TARGET_HT20_5], 24) | + POW_SM(pPwrArray[ALL_TARGET_HT20_4], 16) | + POW_SM(pPwrArray[ALL_TARGET_HT20_1_3_9_11_17_19], 8) | + POW_SM(pPwrArray[ALL_TARGET_HT20_0_8_16], 0) + ); + + /* 6 (LSB), 7, 12, 13 (MSB) */ + REG_WRITE(ah, 0xa3d4, + POW_SM(pPwrArray[ALL_TARGET_HT20_13], 24) | + POW_SM(pPwrArray[ALL_TARGET_HT20_12], 16) | + POW_SM(pPwrArray[ALL_TARGET_HT20_7], 8) | + POW_SM(pPwrArray[ALL_TARGET_HT20_6], 0) + ); + + /* 14 (LSB), 15, 20, 21 */ + REG_WRITE(ah, 0xa3e4, + POW_SM(pPwrArray[ALL_TARGET_HT20_21], 24) | + POW_SM(pPwrArray[ALL_TARGET_HT20_20], 16) | + POW_SM(pPwrArray[ALL_TARGET_HT20_15], 8) | + POW_SM(pPwrArray[ALL_TARGET_HT20_14], 0) + ); + + /* Mixed HT20 and HT40 rates */ + + /* HT20 22 (LSB), HT20 23, HT40 22, HT40 23 (MSB) */ + REG_WRITE(ah, 0xa3e8, + POW_SM(pPwrArray[ALL_TARGET_HT40_23], 24) | + POW_SM(pPwrArray[ALL_TARGET_HT40_22], 16) | + POW_SM(pPwrArray[ALL_TARGET_HT20_23], 8) | + POW_SM(pPwrArray[ALL_TARGET_HT20_22], 0) + ); + + /* Write the HT40 power per rate set */ + // correct PAR difference between HT40 and HT20/LEGACY + /* 0/8/16 (LSB), 1-3/9-11/17-19, 4, 5 (MSB) */ + REG_WRITE(ah, 0xa3d8, + POW_SM(pPwrArray[ALL_TARGET_HT40_5], 24) | + POW_SM(pPwrArray[ALL_TARGET_HT40_4], 16) | + POW_SM(pPwrArray[ALL_TARGET_HT40_1_3_9_11_17_19], 8) | + POW_SM(pPwrArray[ALL_TARGET_HT40_0_8_16], 0) + ); + + /* 6 (LSB), 7, 12, 13 (MSB) */ + REG_WRITE(ah, 0xa3dc, + POW_SM(pPwrArray[ALL_TARGET_HT40_13], 24) | + POW_SM(pPwrArray[ALL_TARGET_HT40_12], 16) | + POW_SM(pPwrArray[ALL_TARGET_HT40_7], 8) | + POW_SM(pPwrArray[ALL_TARGET_HT40_6], 0) + ); + + /* 14 (LSB), 15, 20, 21 */ + REG_WRITE(ah, 0xa3ec, + POW_SM(pPwrArray[ALL_TARGET_HT40_21], 24) | + POW_SM(pPwrArray[ALL_TARGET_HT40_20], 16) | + POW_SM(pPwrArray[ALL_TARGET_HT40_15], 8) | + POW_SM(pPwrArray[ALL_TARGET_HT40_14], 0) + ); + + return 0; +#undef POW_SM +} + +static void ar9003_hw_set_target_power_eeprom(struct ath_hw *ah, u16 freq) +{ + u8 targetPowerValT2[ar9300RateSize]; + /* XXX: hard code for now, need to get from eeprom struct */ + u8 ht40PowerIncForPdadc = 0; + bool is2GHz = false; + unsigned int i = 0; + struct ath_common *common = ath9k_hw_common(ah); + + if (freq < 4000) + is2GHz = true; + + targetPowerValT2[ALL_TARGET_LEGACY_6_24] = + ar9003_hw_eeprom_get_tgt_pwr(ah, LEGACY_TARGET_RATE_6_24, freq, + is2GHz); + targetPowerValT2[ALL_TARGET_LEGACY_36] = + ar9003_hw_eeprom_get_tgt_pwr(ah, LEGACY_TARGET_RATE_36, freq, + is2GHz); + targetPowerValT2[ALL_TARGET_LEGACY_48] = + ar9003_hw_eeprom_get_tgt_pwr(ah, LEGACY_TARGET_RATE_48, freq, + is2GHz); + targetPowerValT2[ALL_TARGET_LEGACY_54] = + ar9003_hw_eeprom_get_tgt_pwr(ah, LEGACY_TARGET_RATE_54, freq, + is2GHz); + targetPowerValT2[ALL_TARGET_LEGACY_1L_5L] = + ar9003_hw_eeprom_get_cck_tgt_pwr(ah, LEGACY_TARGET_RATE_1L_5L, + freq); + targetPowerValT2[ALL_TARGET_LEGACY_5S] = + ar9003_hw_eeprom_get_cck_tgt_pwr(ah, LEGACY_TARGET_RATE_5S, freq); + targetPowerValT2[ALL_TARGET_LEGACY_11L] = + ar9003_hw_eeprom_get_cck_tgt_pwr(ah, LEGACY_TARGET_RATE_11L, freq); + targetPowerValT2[ALL_TARGET_LEGACY_11S] = + ar9003_hw_eeprom_get_cck_tgt_pwr(ah, LEGACY_TARGET_RATE_11S, freq); + targetPowerValT2[ALL_TARGET_HT20_0_8_16] = + ar9003_hw_eeprom_get_ht20_tgt_pwr(ah, HT_TARGET_RATE_0_8_16, freq, + is2GHz); + targetPowerValT2[ALL_TARGET_HT20_1_3_9_11_17_19] = + ar9003_hw_eeprom_get_ht20_tgt_pwr(ah, HT_TARGET_RATE_1_3_9_11_17_19, + freq, is2GHz); + targetPowerValT2[ALL_TARGET_HT20_4] = + ar9003_hw_eeprom_get_ht20_tgt_pwr(ah, HT_TARGET_RATE_4, freq, + is2GHz); + targetPowerValT2[ALL_TARGET_HT20_5] = + ar9003_hw_eeprom_get_ht20_tgt_pwr(ah, HT_TARGET_RATE_5, freq, + is2GHz); + targetPowerValT2[ALL_TARGET_HT20_6] = + ar9003_hw_eeprom_get_ht20_tgt_pwr(ah, HT_TARGET_RATE_6, freq, + is2GHz); + targetPowerValT2[ALL_TARGET_HT20_7] = + ar9003_hw_eeprom_get_ht20_tgt_pwr(ah, HT_TARGET_RATE_7, freq, + is2GHz); + targetPowerValT2[ALL_TARGET_HT20_12] = + ar9003_hw_eeprom_get_ht20_tgt_pwr(ah, HT_TARGET_RATE_12, freq, + is2GHz); + targetPowerValT2[ALL_TARGET_HT20_13] = + ar9003_hw_eeprom_get_ht20_tgt_pwr(ah, HT_TARGET_RATE_13, freq, + is2GHz); + targetPowerValT2[ALL_TARGET_HT20_14] = + ar9003_hw_eeprom_get_ht20_tgt_pwr(ah, HT_TARGET_RATE_14, freq, + is2GHz); + targetPowerValT2[ALL_TARGET_HT20_15] = + ar9003_hw_eeprom_get_ht20_tgt_pwr(ah, HT_TARGET_RATE_15, freq, + is2GHz); + targetPowerValT2[ALL_TARGET_HT20_20] = + ar9003_hw_eeprom_get_ht20_tgt_pwr(ah, HT_TARGET_RATE_20, freq, + is2GHz); + targetPowerValT2[ALL_TARGET_HT20_21] = + ar9003_hw_eeprom_get_ht20_tgt_pwr(ah, HT_TARGET_RATE_21, freq, + is2GHz); + targetPowerValT2[ALL_TARGET_HT20_22] = + ar9003_hw_eeprom_get_ht20_tgt_pwr(ah, HT_TARGET_RATE_22, freq, + is2GHz); + targetPowerValT2[ALL_TARGET_HT20_23] = + ar9003_hw_eeprom_get_ht20_tgt_pwr(ah, HT_TARGET_RATE_23, freq, + is2GHz); + targetPowerValT2[ALL_TARGET_HT40_0_8_16] = + ar9003_hw_eeprom_get_ht40_tgt_pwr(ah, HT_TARGET_RATE_0_8_16, freq, + is2GHz) + ht40PowerIncForPdadc; + targetPowerValT2[ALL_TARGET_HT40_1_3_9_11_17_19] = + ar9003_hw_eeprom_get_ht40_tgt_pwr(ah, HT_TARGET_RATE_1_3_9_11_17_19, + freq, + is2GHz) + ht40PowerIncForPdadc; + targetPowerValT2[ALL_TARGET_HT40_4] = + ar9003_hw_eeprom_get_ht40_tgt_pwr(ah, HT_TARGET_RATE_4, freq, + is2GHz) + ht40PowerIncForPdadc; + targetPowerValT2[ALL_TARGET_HT40_5] = + ar9003_hw_eeprom_get_ht40_tgt_pwr(ah, HT_TARGET_RATE_5, freq, + is2GHz) + ht40PowerIncForPdadc; + targetPowerValT2[ALL_TARGET_HT40_6] = + ar9003_hw_eeprom_get_ht40_tgt_pwr(ah, HT_TARGET_RATE_6, freq, + is2GHz) + ht40PowerIncForPdadc; + targetPowerValT2[ALL_TARGET_HT40_7] = + ar9003_hw_eeprom_get_ht40_tgt_pwr(ah, HT_TARGET_RATE_7, freq, + is2GHz) + ht40PowerIncForPdadc; + targetPowerValT2[ALL_TARGET_HT40_12] = + ar9003_hw_eeprom_get_ht40_tgt_pwr(ah, HT_TARGET_RATE_12, freq, + is2GHz) + ht40PowerIncForPdadc; + targetPowerValT2[ALL_TARGET_HT40_13] = + ar9003_hw_eeprom_get_ht40_tgt_pwr(ah, HT_TARGET_RATE_13, freq, + is2GHz) + ht40PowerIncForPdadc; + targetPowerValT2[ALL_TARGET_HT40_14] = + ar9003_hw_eeprom_get_ht40_tgt_pwr(ah, HT_TARGET_RATE_14, freq, + is2GHz) + ht40PowerIncForPdadc; + targetPowerValT2[ALL_TARGET_HT40_15] = + ar9003_hw_eeprom_get_ht40_tgt_pwr(ah, HT_TARGET_RATE_15, freq, + is2GHz) + ht40PowerIncForPdadc; + targetPowerValT2[ALL_TARGET_HT40_20] = + ar9003_hw_eeprom_get_ht40_tgt_pwr(ah, HT_TARGET_RATE_20, freq, + is2GHz) + ht40PowerIncForPdadc; + targetPowerValT2[ALL_TARGET_HT40_21] = + ar9003_hw_eeprom_get_ht40_tgt_pwr(ah, HT_TARGET_RATE_21, freq, + is2GHz) + ht40PowerIncForPdadc; + targetPowerValT2[ALL_TARGET_HT40_22] = + ar9003_hw_eeprom_get_ht40_tgt_pwr(ah, HT_TARGET_RATE_22, freq, + is2GHz) + ht40PowerIncForPdadc; + targetPowerValT2[ALL_TARGET_HT40_23] = + ar9003_hw_eeprom_get_ht40_tgt_pwr(ah, HT_TARGET_RATE_23, freq, + is2GHz) + ht40PowerIncForPdadc; + + while (i < ar9300RateSize) { + ath_print(common, ATH_DBG_EEPROM, + "TPC[%02d] 0x%08x ", i, targetPowerValT2[i]); + i++; + + ath_print(common, ATH_DBG_EEPROM, + "TPC[%02d] 0x%08x ", i, targetPowerValT2[i]); + i++; + + ath_print(common, ATH_DBG_EEPROM, + "TPC[%02d] 0x%08x ", i, targetPowerValT2[i]); + i++; + + ath_print(common, ATH_DBG_EEPROM, + "TPC[%02d] 0x%08x \n", i, targetPowerValT2[i]); + i++; + } + + /* Write target power array to registers */ + ar9003_hw_tx_power_regwrite(ah, targetPowerValT2); +} + +static int ar9003_hw_cal_pier_get(struct ath_hw *ah, + int mode, + int ipier, + int ichain, + int *pfrequency, + int *pcorrection, + int *ptemperature, int *pvoltage) +{ + u8 *pCalPier; + struct ar9300_cal_data_per_freq_op_loop *pCalPierStruct; + int is2GHz; + struct ar9300_eeprom *eep = &ah->eeprom.ar9300_eep; + struct ath_common *common = ath9k_hw_common(ah); + + if (ichain >= AR9300_MAX_CHAINS) { + ath_print(common, ATH_DBG_EEPROM, + "Invalid chain index, must be less than %d\n", + AR9300_MAX_CHAINS); + return -1; + } + + if (mode) { /* 5GHz */ + if (ipier >= AR9300_NUM_5G_CAL_PIERS) { + ath_print(common, ATH_DBG_EEPROM, + "Invalid 5GHz cal pier index, must be less than %d\n", + AR9300_NUM_5G_CAL_PIERS); + return -1; + } + pCalPier = &(eep->calFreqPier5G[ipier]); + pCalPierStruct = &(eep->calPierData5G[ichain][ipier]); + is2GHz = 0; + } else { + if (ipier >= AR9300_NUM_2G_CAL_PIERS) { + ath_print(common, ATH_DBG_EEPROM, + "Invalid 2GHz cal pier index, must " + "be less than %d\n", AR9300_NUM_2G_CAL_PIERS); + return -1; + } + + pCalPier = &(eep->calFreqPier2G[ipier]); + pCalPierStruct = &(eep->calPierData2G[ichain][ipier]); + is2GHz = 1; + } + + *pfrequency = FBIN2FREQ(*pCalPier, is2GHz); + *pcorrection = pCalPierStruct->refPower; + *ptemperature = pCalPierStruct->tempMeas; + *pvoltage = pCalPierStruct->voltMeas; + + return 0; +} + +static int ar9003_hw_power_control_override(struct ath_hw *ah, + int frequency, + int *correction, + int *voltage, int *temperature) +{ + int tempSlope = 0; + struct ar9300_eeprom *eep = &ah->eeprom.ar9300_eep; + + REG_RMW(ah, AR_PHY_TPC_11_B0, + (correction[0] << AR_PHY_TPC_OLPC_GAIN_DELTA_S), + AR_PHY_TPC_OLPC_GAIN_DELTA); + REG_RMW(ah, AR_PHY_TPC_11_B1, + (correction[1] << AR_PHY_TPC_OLPC_GAIN_DELTA_S), + AR_PHY_TPC_OLPC_GAIN_DELTA); + REG_RMW(ah, AR_PHY_TPC_11_B2, + (correction[2] << AR_PHY_TPC_OLPC_GAIN_DELTA_S), + AR_PHY_TPC_OLPC_GAIN_DELTA); + + /* enable open loop power control on chip */ + REG_RMW(ah, AR_PHY_TPC_6_B0, + (3 << AR_PHY_TPC_6_ERROR_EST_MODE_S), + AR_PHY_TPC_6_ERROR_EST_MODE); + REG_RMW(ah, AR_PHY_TPC_6_B1, + (3 << AR_PHY_TPC_6_ERROR_EST_MODE_S), + AR_PHY_TPC_6_ERROR_EST_MODE); + REG_RMW(ah, AR_PHY_TPC_6_B2, + (3 << AR_PHY_TPC_6_ERROR_EST_MODE_S), + AR_PHY_TPC_6_ERROR_EST_MODE); + + /* + * enable temperature compensation + * Need to use register names + */ + if (frequency < 4000) + tempSlope = eep->modalHeader2G.tempSlope; + else + tempSlope = eep->modalHeader5G.tempSlope; + + REG_RMW_FIELD(ah, AR_PHY_TPC_19, AR_PHY_TPC_19_ALPHA_THERM, tempSlope); + REG_RMW_FIELD(ah, AR_PHY_TPC_18, AR_PHY_TPC_18_THERM_CAL_VALUE, + temperature[0]); + + return 0; +} + +/* Apply the recorded correction values. */ +static int ar9003_hw_calibration_apply(struct ath_hw *ah, int frequency) +{ + int ichain, ipier, npier; + int mode; + int lfrequency[AR9300_MAX_CHAINS], + lcorrection[AR9300_MAX_CHAINS], + ltemperature[AR9300_MAX_CHAINS], lvoltage[AR9300_MAX_CHAINS]; + int hfrequency[AR9300_MAX_CHAINS], + hcorrection[AR9300_MAX_CHAINS], + htemperature[AR9300_MAX_CHAINS], hvoltage[AR9300_MAX_CHAINS]; + int fdiff; + int correction[AR9300_MAX_CHAINS], + voltage[AR9300_MAX_CHAINS], temperature[AR9300_MAX_CHAINS]; + int pfrequency, pcorrection, ptemperature, pvoltage; + struct ath_common *common = ath9k_hw_common(ah); + + mode = (frequency >= 4000); + if (mode) + npier = AR9300_NUM_5G_CAL_PIERS; + else + npier = AR9300_NUM_2G_CAL_PIERS; + + for (ichain = 0; ichain < AR9300_MAX_CHAINS; ichain++) { + lfrequency[ichain] = 0; + hfrequency[ichain] = 100000; + } + /* identify best lower and higher frequency calibration measurement */ + for (ichain = 0; ichain < AR9300_MAX_CHAINS; ichain++) { + for (ipier = 0; ipier < npier; ipier++) { + if (!ar9003_hw_cal_pier_get(ah, mode, ipier, ichain, + &pfrequency, &pcorrection, + &ptemperature, &pvoltage)) { + fdiff = frequency - pfrequency; + + /* + * this measurement is higher than + * our desired frequency + */ + if (fdiff <= 0) { + if (hfrequency[ichain] <= 0 || + hfrequency[ichain] >= 100000 || + fdiff > + (frequency - hfrequency[ichain])) { + /* new best higher frequency measurement */ + hfrequency[ichain] = pfrequency; + hcorrection[ichain] = + pcorrection; + htemperature[ichain] = + ptemperature; + hvoltage[ichain] = pvoltage; + } + } + if (fdiff >= 0) { + if (lfrequency[ichain] <= 0 + || fdiff < + (frequency - lfrequency[ichain])) { + /* new best lower frequency measurement */ + lfrequency[ichain] = pfrequency; + lcorrection[ichain] = + pcorrection; + ltemperature[ichain] = + ptemperature; + lvoltage[ichain] = pvoltage; + } + } + } + } + } + + /* interpolate */ + for (ichain = 0; ichain < AR9300_MAX_CHAINS; ichain++) { + ath_print(common, ATH_DBG_EEPROM, + "ch=%d f=%d low=%d %d h=%d %d\n", + ichain, frequency, lfrequency[ichain], + lcorrection[ichain], hfrequency[ichain], + hcorrection[ichain]); + /* they're the same, so just pick one */ + if (hfrequency[ichain] == lfrequency[ichain]) { + correction[ichain] = lcorrection[ichain]; + voltage[ichain] = lvoltage[ichain]; + temperature[ichain] = ltemperature[ichain]; + } + /* the low frequency is good */ + else if (frequency - lfrequency[ichain] < 1000) { + /* so is the high frequency, interpolate */ + if (hfrequency[ichain] - frequency < 1000) { + + correction[ichain] = lcorrection[ichain] + + (((frequency - lfrequency[ichain]) * + (hcorrection[ichain] - + lcorrection[ichain])) / + (hfrequency[ichain] - lfrequency[ichain])); + + temperature[ichain] = ltemperature[ichain] + + (((frequency - lfrequency[ichain]) * + (htemperature[ichain] - + ltemperature[ichain])) / + (hfrequency[ichain] - lfrequency[ichain])); + + voltage[ichain] = + lvoltage[ichain] + + (((frequency - + lfrequency[ichain]) * (hvoltage[ichain] - + lvoltage[ichain])) + / (hfrequency[ichain] - + lfrequency[ichain])); + } + /* only low is good, use it */ + else { + correction[ichain] = lcorrection[ichain]; + temperature[ichain] = ltemperature[ichain]; + voltage[ichain] = lvoltage[ichain]; + } + } + /* only high is good, use it */ + else if (hfrequency[ichain] - frequency < 1000) { + correction[ichain] = hcorrection[ichain]; + temperature[ichain] = htemperature[ichain]; + voltage[ichain] = hvoltage[ichain]; + } else { /* nothing is good, presume 0???? */ + correction[ichain] = 0; + temperature[ichain] = 0; + voltage[ichain] = 0; + } + } + + ar9003_hw_power_control_override(ah, frequency, correction, voltage, + temperature); + + ath_print(common, ATH_DBG_EEPROM, + "for frequency=%d, calibration correction = %d %d %d\n", + frequency, correction[0], correction[1], correction[2]); + + return 0; +} + +static void ath9k_hw_ar9300_set_txpower(struct ath_hw *ah, + struct ath9k_channel *chan, u16 cfgCtl, + u8 twiceAntennaReduction, + u8 twiceMaxRegulatoryPower, + u8 powerLimit) +{ + ar9003_hw_set_target_power_eeprom(ah, chan->channel); + ar9003_hw_calibration_apply(ah, chan->channel); +} + +static u16 ath9k_hw_ar9300_get_spur_channel(struct ath_hw *ah, + u16 i, bool is2GHz) +{ + return AR_NO_SPUR; +} + +const struct eeprom_ops eep_ar9300_ops = { + .check_eeprom = ath9k_hw_ar9300_check_eeprom, + .get_eeprom = ath9k_hw_ar9300_get_eeprom, + .fill_eeprom = ath9k_hw_ar9300_fill_eeprom, + .get_eeprom_ver = ath9k_hw_ar9300_get_eeprom_ver, + .get_eeprom_rev = ath9k_hw_ar9300_get_eeprom_rev, + .get_num_ant_config = ath9k_hw_ar9300_get_num_ant_config, + .get_eeprom_antenna_cfg = ath9k_hw_ar9300_get_eeprom_antenna_cfg, + .set_board_values = ath9k_hw_ar9300_set_board_values, + .set_addac = ath9k_hw_ar9300_set_addac, + .set_txpower = ath9k_hw_ar9300_set_txpower, + .get_spur_channel = ath9k_hw_ar9300_get_spur_channel +}; diff --git a/drivers/net/wireless/ath/ath9k/ar9003_eeprom.h b/drivers/net/wireless/ath/ath9k/ar9003_eeprom.h new file mode 100644 index 0000000..2749915 --- /dev/null +++ b/drivers/net/wireless/ath/ath9k/ar9003_eeprom.h @@ -0,0 +1,319 @@ +#ifndef AR9003_EEPROM_H +#define AR9003_EEPROM_H + +#include + +#define AR9300_EEP_VER 0xD000 +#define AR9300_EEP_VER_MINOR_MASK 0xFFF +#define AR9300_EEP_MINOR_VER_1 0x1 +#define AR9300_EEP_MINOR_VER AR9300_EEP_MINOR_VER_1 + +// 16-bit offset location start of calibration struct +#define AR9300_EEP_START_LOC 256 +#define AR9300_NUM_5G_CAL_PIERS 8 +#define AR9300_NUM_2G_CAL_PIERS 3 +#define AR9300_NUM_5G_20_TARGET_POWERS 8 +#define AR9300_NUM_5G_40_TARGET_POWERS 8 +#define AR9300_NUM_2G_CCK_TARGET_POWERS 2 +#define AR9300_NUM_2G_20_TARGET_POWERS 3 +#define AR9300_NUM_2G_40_TARGET_POWERS 3 +//#define AR9300_NUM_CTLS 21 +#define AR9300_NUM_CTLS_5G 9 +#define AR9300_NUM_CTLS_2G 12 +#define AR9300_CTL_MODE_M 0xF +#define AR9300_NUM_BAND_EDGES_5G 8 +#define AR9300_NUM_BAND_EDGES_2G 4 +#define AR9300_NUM_PD_GAINS 4 +#define AR9300_PD_GAINS_IN_MASK 4 +#define AR9300_PD_GAIN_ICEPTS 5 +#define AR9300_EEPROM_MODAL_SPURS 5 +#define AR9300_MAX_RATE_POWER 63 +#define AR9300_NUM_PDADC_VALUES 128 +#define AR9300_NUM_RATES 16 +#define AR9300_BCHAN_UNUSED 0xFF +#define AR9300_MAX_PWR_RANGE_IN_HALF_DB 64 +#define AR9300_OPFLAGS_11A 0x01 +#define AR9300_OPFLAGS_11G 0x02 +#define AR9300_OPFLAGS_5G_HT40 0x04 +#define AR9300_OPFLAGS_2G_HT40 0x08 +#define AR9300_OPFLAGS_5G_HT20 0x10 +#define AR9300_OPFLAGS_2G_HT20 0x20 +#define AR9300_EEPMISC_BIG_ENDIAN 0x01 +#define AR9300_EEPMISC_WOW 0x02 +#define AR9300_CUSTOMER_DATA_SIZE 20 + +#define FREQ2FBIN(x,y) ((y) ? ((x) - 2300) : (((x) - 4800) / 5)) +#define FBIN2FREQ(x,y) ((y) ? (2300 + x) : (4800 + 5 * x)) +#define AR9300_MAX_CHAINS 3 +#define AR9300_ANT_16S 25 +#define AR9300_FUTURE_MODAL_SZ 6 + +#define AR9300_NUM_ANT_CHAIN_FIELDS 7 +#define AR9300_NUM_ANT_COMMON_FIELDS 4 +#define AR9300_SIZE_ANT_CHAIN_FIELD 3 +#define AR9300_SIZE_ANT_COMMON_FIELD 4 +#define AR9300_ANT_CHAIN_MASK 0x7 +#define AR9300_ANT_COMMON_MASK 0xf +#define AR9300_CHAIN_0_IDX 0 +#define AR9300_CHAIN_1_IDX 1 +#define AR9300_CHAIN_2_IDX 2 + +#define AR928X_NUM_ANT_CHAIN_FIELDS 6 +#define AR928X_SIZE_ANT_CHAIN_FIELD 2 +#define AR928X_ANT_CHAIN_MASK 0x3 + +/* Delta from which to start power to pdadc table */ +/* This offset is used in both open loop and closed loop power control + * schemes. In open loop power control, it is not really needed, but for + * the "sake of consistency" it was kept. For certain AP designs, this + * value is overwritten by the value in the flag "pwrTableOffset" just + * before writing the pdadc vs pwr into the chip registers. + */ +#define AR9300_PWR_TABLE_OFFSET 0 + +/* enable flags for voltage and temp compensation */ +#define ENABLE_TEMP_COMPENSATION 0x01 +#define ENABLE_VOLT_COMPENSATION 0x02 +/* byte addressable */ +#define AR9300_EEPROM_SIZE 16*1024 +#define FIXED_CCA_THRESHOLD 15 + +#define AR9300_BASE_ADDR 0x3ff + +enum targetPowerHTRates { + HT_TARGET_RATE_0_8_16, + HT_TARGET_RATE_1_3_9_11_17_19, + HT_TARGET_RATE_4, + HT_TARGET_RATE_5, + HT_TARGET_RATE_6, + HT_TARGET_RATE_7, + HT_TARGET_RATE_12, + HT_TARGET_RATE_13, + HT_TARGET_RATE_14, + HT_TARGET_RATE_15, + HT_TARGET_RATE_20, + HT_TARGET_RATE_21, + HT_TARGET_RATE_22, + HT_TARGET_RATE_23 +}; + +enum targetPowerLegacyRates { + LEGACY_TARGET_RATE_6_24, + LEGACY_TARGET_RATE_36, + LEGACY_TARGET_RATE_48, + LEGACY_TARGET_RATE_54 +}; + +enum targetPowerCckRates { + LEGACY_TARGET_RATE_1L_5L, + LEGACY_TARGET_RATE_5S, + LEGACY_TARGET_RATE_11L, + LEGACY_TARGET_RATE_11S +}; + +enum ar9300_Rates { + ALL_TARGET_LEGACY_6_24, + ALL_TARGET_LEGACY_36, + ALL_TARGET_LEGACY_48, + ALL_TARGET_LEGACY_54, + ALL_TARGET_LEGACY_1L_5L, + ALL_TARGET_LEGACY_5S, + ALL_TARGET_LEGACY_11L, + ALL_TARGET_LEGACY_11S, + ALL_TARGET_HT20_0_8_16, + ALL_TARGET_HT20_1_3_9_11_17_19, + ALL_TARGET_HT20_4, + ALL_TARGET_HT20_5, + ALL_TARGET_HT20_6, + ALL_TARGET_HT20_7, + ALL_TARGET_HT20_12, + ALL_TARGET_HT20_13, + ALL_TARGET_HT20_14, + ALL_TARGET_HT20_15, + ALL_TARGET_HT20_20, + ALL_TARGET_HT20_21, + ALL_TARGET_HT20_22, + ALL_TARGET_HT20_23, + ALL_TARGET_HT40_0_8_16, + ALL_TARGET_HT40_1_3_9_11_17_19, + ALL_TARGET_HT40_4, + ALL_TARGET_HT40_5, + ALL_TARGET_HT40_6, + ALL_TARGET_HT40_7, + ALL_TARGET_HT40_12, + ALL_TARGET_HT40_13, + ALL_TARGET_HT40_14, + ALL_TARGET_HT40_15, + ALL_TARGET_HT40_20, + ALL_TARGET_HT40_21, + ALL_TARGET_HT40_22, + ALL_TARGET_HT40_23, + ar9300RateSize, +}; + + +struct eepFlags { + u8 opFlags; + u8 eepMisc; +} __packed; + +enum CompressAlgorithm { + _CompressNone = 0, + _CompressLzma, + _CompressPairs, + _CompressBlock, + _Compress4, + _Compress5, + _Compress6, + _Compress7, +}; + +struct ar9300_base_eep_hdr { + u16 regDmn[2]; + /* 4 bits tx and 4 bits rx */ + u8 txrxMask; + struct eepFlags opCapFlags; + u8 rfSilent; + u8 blueToothOptions; + u8 deviceCap; + /* takes lower byte in eeprom location */ + u8 deviceType; + /* offset in dB to be added to beginning + * of pdadc table in calibration + */ + int8_t pwrTableOffset; + u8 params_for_tuning_caps[2]; + /* + * bit0 - enable tx temp comp + * bit1 - enable tx volt comp + * bit2 - enable fastClock - default to 1 + * bit3 - enable doubling - default to 1 + * bit4 - enable internal regulator - default to 1 + */ + u8 featureEnable; + /* misc flags: bit0 - turn down drivestrength */ + u8 miscConfiguration; + u8 eepromWriteEnableGpio; + u8 wlanDisableGpio; + u8 wlanLedGpio; + u8 rxBandSelectGpio; + u8 txrxgain; + /* SW controlled internal regulator fields */ + u32 swreg; +} __packed; + +struct ar9300_modal_eep_header { + /* 4 idle, t1, t2, b (4 bits per setting) */ + u32 antCtrlCommon; + /* 4 ra1l1, ra2l1, ra1l2, ra2l2, ra12 */ + u32 antCtrlCommon2; + /* 6 idle, t, r, rx1, rx12, b (2 bits each) */ + u16 antCtrlChain[AR9300_MAX_CHAINS]; + /* 3 xatten1_db for AR9280 (0xa20c/b20c 5:0) */ + u8 xatten1DB[AR9300_MAX_CHAINS]; + /* 3 xatten1_margin for merlin (0xa20c/b20c 16:12 */ + u8 xatten1Margin[AR9300_MAX_CHAINS]; + int8_t tempSlope; + int8_t voltSlope; + /* spur channels in usual fbin coding format */ + u8 spurChans[AR9300_EEPROM_MODAL_SPURS]; + /* 3 Check if the register is per chain */ + int8_t noiseFloorThreshCh[AR9300_MAX_CHAINS]; + u8 ob[AR9300_MAX_CHAINS]; + u8 db_stage2[AR9300_MAX_CHAINS]; + u8 db_stage3[AR9300_MAX_CHAINS]; + u8 db_stage4[AR9300_MAX_CHAINS]; + u8 xpaBiasLvl; + u8 txFrameToDataStart; + u8 txFrameToPaOn; + u8 txClip; + int8_t antennaGain; + u8 switchSettling; + int8_t adcDesiredSize; + u8 txEndToXpaOff; + u8 txEndToRxOn; + u8 txFrameToXpaOn; + u8 thresh62; + u8 futureModal[32]; +} __packed; + +struct ar9300_cal_data_per_freq_op_loop { + int8_t refPower; + /* pdadc voltage at power measurement */ + u8 voltMeas; + /* pcdac used for power measurement */ + u8 tempMeas; + /* range is -60 to -127 create a mapping equation 1db resolution */ + int8_t rxNoisefloorCal; + /*range is same as noisefloor */ + int8_t rxNoisefloorPower; + /* temp measured when noisefloor cal was performed */ + u8 rxTempMeas; +} __packed; + +struct cal_tgt_pow_legacy { + u8 tPow2x[4]; +} __packed; + +struct cal_tgt_pow_ht { + u8 tPow2x[14]; +} __packed; + +struct cal_ctl_edge_pwr { + u8 tPower :6, + flag :2; +} __packed; + +struct cal_ctl_data_2g { + struct cal_ctl_edge_pwr ctlEdges[AR9300_NUM_BAND_EDGES_5G]; +} __packed; + +struct cal_ctl_data_5g { + struct cal_ctl_edge_pwr ctlEdges[AR9300_NUM_BAND_EDGES_5G]; +} __packed; + +struct ar9300_eeprom { + u8 eepromVersion; + u8 templateVersion; + u8 macAddr[6]; + u8 custData[AR9300_CUSTOMER_DATA_SIZE]; + + struct ar9300_base_eep_hdr baseEepHeader; + + struct ar9300_modal_eep_header modalHeader2G; + u8 calFreqPier2G[AR9300_NUM_2G_CAL_PIERS]; + struct ar9300_cal_data_per_freq_op_loop + calPierData2G[AR9300_MAX_CHAINS][AR9300_NUM_2G_CAL_PIERS]; + u8 calTarget_freqbin_Cck[AR9300_NUM_2G_CCK_TARGET_POWERS]; + u8 calTarget_freqbin_2G[AR9300_NUM_2G_20_TARGET_POWERS]; + u8 calTarget_freqbin_2GHT20[AR9300_NUM_2G_20_TARGET_POWERS]; + u8 calTarget_freqbin_2GHT40[AR9300_NUM_2G_40_TARGET_POWERS]; + struct cal_tgt_pow_legacy + calTargetPowerCck[AR9300_NUM_2G_CCK_TARGET_POWERS]; + struct cal_tgt_pow_legacy + calTargetPower2G[AR9300_NUM_2G_20_TARGET_POWERS]; + struct cal_tgt_pow_ht + calTargetPower2GHT20[AR9300_NUM_2G_20_TARGET_POWERS]; + struct cal_tgt_pow_ht + calTargetPower2GHT40[AR9300_NUM_2G_40_TARGET_POWERS]; + u8 ctlIndex_2G[AR9300_NUM_CTLS_2G]; + u8 ctl_freqbin_2G[AR9300_NUM_CTLS_2G][AR9300_NUM_BAND_EDGES_2G]; + struct cal_ctl_data_2g ctlPowerData_2G[AR9300_NUM_CTLS_2G]; + struct ar9300_modal_eep_header modalHeader5G; + u8 calFreqPier5G[AR9300_NUM_5G_CAL_PIERS]; + struct ar9300_cal_data_per_freq_op_loop + calPierData5G[AR9300_MAX_CHAINS][AR9300_NUM_5G_CAL_PIERS]; + u8 calTarget_freqbin_5G[AR9300_NUM_5G_20_TARGET_POWERS]; + u8 calTarget_freqbin_5GHT20[AR9300_NUM_5G_20_TARGET_POWERS]; + u8 calTarget_freqbin_5GHT40[AR9300_NUM_5G_40_TARGET_POWERS]; + struct cal_tgt_pow_legacy + calTargetPower5G[AR9300_NUM_5G_20_TARGET_POWERS]; + struct cal_tgt_pow_ht + calTargetPower5GHT20[AR9300_NUM_5G_20_TARGET_POWERS]; + struct cal_tgt_pow_ht + calTargetPower5GHT40[AR9300_NUM_5G_40_TARGET_POWERS]; + u8 ctlIndex_5G[AR9300_NUM_CTLS_5G]; + u8 ctl_freqbin_5G[AR9300_NUM_CTLS_5G][AR9300_NUM_BAND_EDGES_5G]; + struct cal_ctl_data_5g ctlPowerData_5G[AR9300_NUM_CTLS_5G]; +} __packed; +#endif diff --git a/drivers/net/wireless/ath/ath9k/eeprom.c b/drivers/net/wireless/ath/ath9k/eeprom.c index aec6ebb..bd9dff3 100644 --- a/drivers/net/wireless/ath/ath9k/eeprom.c +++ b/drivers/net/wireless/ath/ath9k/eeprom.c @@ -256,7 +256,9 @@ int ath9k_hw_eeprom_init(struct ath_hw *ah) { int status; - if (AR_SREV_9287(ah)) { + if (AR_SREV_9300_20_OR_LATER(ah)) + ah->eep_ops = &eep_ar9300_ops; + else if (AR_SREV_9287(ah)) { ah->eep_ops = &eep_ar9287_ops; } else if (AR_SREV_9285(ah) || AR_SREV_9271(ah)) { ah->eep_ops = &eep_4k_ops; diff --git a/drivers/net/wireless/ath/ath9k/eeprom.h b/drivers/net/wireless/ath/ath9k/eeprom.h index 289084c..fb9c8c9 100644 --- a/drivers/net/wireless/ath/ath9k/eeprom.h +++ b/drivers/net/wireless/ath/ath9k/eeprom.h @@ -19,6 +19,7 @@ #include "../ath.h" #include +#include "ar9003_eeprom.h" #define AH_USE_EEPROM 0x1 @@ -249,16 +250,20 @@ enum eeprom_param { EEP_MINOR_REV, EEP_TX_MASK, EEP_RX_MASK, + EEP_FSTCLK_5G, EEP_RXGAIN_TYPE, - EEP_TXGAIN_TYPE, EEP_OL_PWRCTRL, + EEP_TXGAIN_TYPE, EEP_RC_CHAIN_MASK, EEP_DAC_HPWR_5G, EEP_FRAC_N_5G, EEP_DEV_TYPE, EEP_TEMPSENSE_SLOPE, EEP_TEMPSENSE_SLOPE_PAL_ON, - EEP_PWR_TABLE_OFFSET + EEP_PWR_TABLE_OFFSET, + EEP_DRIVE_STRENGTH, + EEP_INTERNAL_REGULATOR, + EEP_SWREG }; enum ar5416_rates { @@ -707,5 +712,7 @@ int ath9k_hw_eeprom_init(struct ath_hw *ah); extern const struct eeprom_ops eep_def_ops; extern const struct eeprom_ops eep_4k_ops; extern const struct eeprom_ops eep_ar9287_ops; +extern const struct eeprom_ops eep_ar9287_ops; +extern const struct eeprom_ops eep_ar9300_ops; #endif /* EEPROM_H */ diff --git a/drivers/net/wireless/ath/ath9k/hw.h b/drivers/net/wireless/ath/ath9k/hw.h index 7f49690..3c48399 100644 --- a/drivers/net/wireless/ath/ath9k/hw.h +++ b/drivers/net/wireless/ath/ath9k/hw.h @@ -563,6 +563,7 @@ struct ath_hw { struct ar5416_eeprom_def def; struct ar5416_eeprom_4k map4k; struct ar9287_eeprom map9287; + struct ar9300_eeprom ar9300_eep; } eeprom; const struct eeprom_ops *eep_ops; diff --git a/drivers/net/wireless/ath/ath9k/reg.h b/drivers/net/wireless/ath/ath9k/reg.h index aacc29a..12de95e 100644 --- a/drivers/net/wireless/ath/ath9k/reg.h +++ b/drivers/net/wireless/ath/ath9k/reg.h @@ -1070,6 +1070,16 @@ enum { #define AR_RTC_RC_COLD_RESET 0x00000004 #define AR_RTC_RC_WARM_RESET 0x00000008 +/* Crystal Control */ +#define AR_RTC_XTAL_CONTROL 0x7004 + +/* Reg Control 0 */ +#define AR_RTC_REG_CONTROL0 0x7008 + +/* Reg Control 1 */ +#define AR_RTC_REG_CONTROL1 0x700c +#define AR_RTC_REG_CONTROL1_SWREG_PROGRAM 0x00000001 + #define AR_RTC_PLL_CONTROL \ ((AR_SREV_9100(ah)) ? (AR_RTC_BASE + 0x0014) : 0x7014) @@ -1100,6 +1110,7 @@ enum { #define AR_RTC_SLEEP_CLK \ ((AR_SREV_9100(ah)) ? (AR_RTC_BASE + 0x0048) : 0x7048) #define AR_RTC_FORCE_DERIVED_CLK 0x2 +#define AR_RTC_FORCE_SWREG_PRD 0x00000004 #define AR_RTC_FORCE_WAKE \ ((AR_SREV_9100(ah)) ? (AR_RTC_BASE + 0x004c) : 0x704c) -- 1.6.3.3