From mboxrd@z Thu Jan 1 00:00:00 1970 From: Albert Aribaud Date: Fri, 9 Apr 2010 10:29:05 +0200 Subject: [U-Boot] [PATCH V6 3/3] Add support for the LaCie ED Mini V2 board In-Reply-To: <1270801745-18852-2-git-send-email-albert.aribaud@free.fr> References: <1270801745-18852-1-git-send-email-albert.aribaud@free.fr> <1270801745-18852-2-git-send-email-albert.aribaud@free.fr> Message-ID: <1270801745-18852-3-git-send-email-albert.aribaud@free.fr> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de This patch adds support for the LaCie ED Mini V2 product which is based on the Marvell Orion5x SoC. --- MAINTAINERS | 4 + MAKEALL | 1 + Makefile | 3 + board/LaCie/edminiv2/Makefile | 58 +++++++++++ board/LaCie/edminiv2/board_lowlevel_init.S | 59 +++++++++++ board/LaCie/edminiv2/config.mk | 27 +++++ board/LaCie/edminiv2/edminiv2.c | 93 ++++++++++++++++++ board/LaCie/edminiv2/edminiv2.h | 54 ++++++++++ include/configs/edminiv2.h | 147 ++++++++++++++++++++++++++++ 9 files changed, 446 insertions(+), 0 deletions(-) create mode 100644 board/LaCie/edminiv2/Makefile create mode 100644 board/LaCie/edminiv2/board_lowlevel_init.S create mode 100644 board/LaCie/edminiv2/config.mk create mode 100644 board/LaCie/edminiv2/edminiv2.c create mode 100644 board/LaCie/edminiv2/edminiv2.h create mode 100644 include/configs/edminiv2.h diff --git a/MAINTAINERS b/MAINTAINERS index 0658bc3..ac49654 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -515,6 +515,10 @@ Unknown / orphaned boards: # Board CPU # ######################################################################### +Albert ARIBAUD + + edminiv2 ARM926EJS (Orion5x SoC) + Rowel Atienza armadillo ARM720T diff --git a/MAKEALL b/MAKEALL index a88c31e..d659f92 100755 --- a/MAKEALL +++ b/MAKEALL @@ -559,6 +559,7 @@ LIST_ARM9=" \ edb9312 \ edb9315 \ edb9315a \ + edminiv2 \ imx27lite \ lpd7a400 \ mv88f6281gtw_ge \ diff --git a/Makefile b/Makefile index 4532550..5ae3976 100644 --- a/Makefile +++ b/Makefile @@ -2936,6 +2936,9 @@ davinci_dm365evm_config : unconfig davinci_dm6467evm_config : unconfig @$(MKCONFIG) $(@:_config=) arm arm926ejs dm6467evm davinci davinci +edminiv2_config: unconfig + @$(MKCONFIG) $(@:_config=) arm arm926ejs $(@:_config=) LaCie orion5x + imx27lite_config: unconfig @$(MKCONFIG) $(@:_config=) arm arm926ejs imx27lite logicpd mx27 diff --git a/board/LaCie/edminiv2/Makefile b/board/LaCie/edminiv2/Makefile new file mode 100644 index 0000000..0d6e83d --- /dev/null +++ b/board/LaCie/edminiv2/Makefile @@ -0,0 +1,58 @@ +# +# Copyright (C) 2010 Albert ARIBAUD +# +# Based on original Kirkwood support which is +# (C) Copyright 2009 +# Marvell Semiconductor +# Written-by: Prafulla Wadaskar +# +# See file CREDITS for list of people who contributed to this +# project. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation; either version 2 of +# the License, or (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, +# MA 02110-1301 USA +# + +include $(TOPDIR)/config.mk + +LIB = $(obj)lib$(BOARD).a + +COBJS := edminiv2.o + +ifndef CONFIG_SKIP_LOWLEVEL_INIT +SOBJS := board_lowlevel_init.o +endif + +SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) +OBJS := $(addprefix $(obj),$(COBJS)) +SOBJS := $(addprefix $(obj),$(SOBJS)) + +$(LIB): $(obj).depend $(OBJS) $(SOBJS) + $(AR) $(ARFLAGS) $@ $(OBJS) $(SOBJS) + +clean: + rm -f $(SOBJS) $(OBJS) + +distclean: clean + rm -f $(LIB) core *.bak .depend + +######################################################################### + +# defines $(obj).depend target +include $(SRCTREE)/rules.mk + +sinclude $(obj).depend + +######################################################################### diff --git a/board/LaCie/edminiv2/board_lowlevel_init.S b/board/LaCie/edminiv2/board_lowlevel_init.S new file mode 100644 index 0000000..00e68e9 --- /dev/null +++ b/board/LaCie/edminiv2/board_lowlevel_init.S @@ -0,0 +1,59 @@ +/* + * Copyright (C) 2010 Albert ARIBAUD + * + * (C) Copyright 2009 + * Marvell Semiconductor + * Written-by: Prafulla Wadaskar + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, + * MA 02110-1301 USA + */ + +#include "edminiv2.h" + +/* + * Low-level init happens right after start.S has switched to SVC32, + * flushed and disabled caches and disabled MMU. We're still running + * from the boot chip select, so the first thing we should do is set + * up RAM for us to relocate into. + * + * board_low_level_init is called by the Orion5x lowlevel_init code, + * and sets up board-specifics such as MPPs and GPIOs. + */ + +.globl board_lowlevel_init + +board_lowlevel_init: + + /* Use R3 as the base for Device Bus registers */ + add r3, r4, #0x10000 + + /* init MPPs */ + ldr r6, =EDMINIV2_MPP0_7 + str r6, [r3, #0x000] + ldr r6, =EDMINIV2_MPP8_15 + str r6, [r3, #0x004] + ldr r6, =EDMINIV2_MPP16_23 + str r6, [r3, #0x050] + + /* init GPIOs */ + ldr r6, =EDMINIV2_GPIO_OUT_ENABLE + str r6, [r3, #0x104] + + /* Return to lowlevel_init via saved link register */ + mov pc, lr diff --git a/board/LaCie/edminiv2/config.mk b/board/LaCie/edminiv2/config.mk new file mode 100644 index 0000000..3dec1aa --- /dev/null +++ b/board/LaCie/edminiv2/config.mk @@ -0,0 +1,27 @@ +# +# Copyright (C) 2010 Albert ARIBAUD +# +# (C) Copyright 2009 +# Marvell Semiconductor +# Written-by: Prafulla Wadaskar +# +# See file CREDITS for list of people who contributed to this +# project. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation; either version 2 of +# the License, or (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, +# MA 02110-1301 USA +# + +TEXT_BASE = 0x00100000 diff --git a/board/LaCie/edminiv2/edminiv2.c b/board/LaCie/edminiv2/edminiv2.c new file mode 100644 index 0000000..8337990 --- /dev/null +++ b/board/LaCie/edminiv2/edminiv2.c @@ -0,0 +1,93 @@ +/* + * Copyright (C) 2010 Albert ARIBAUD + * + * (C) Copyright 2009 + * Marvell Semiconductor + * Written-by: Prafulla Wadaskar + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, + * MA 02110-1301 USA + */ + +#include +#include +#include +#include "edminiv2.h" + +DECLARE_GLOBAL_DATA_PTR; + +/* + * The ED Mini V2 is equipped with a Macronix MXLV400CB FLASH + * which CFI does not properly detect, hence the LEGACY config. + */ +#if defined(CONFIG_FLASH_CFI_LEGACY) +#include +ulong board_flash_get_legacy(ulong base, int banknum, flash_info_t *info) +{ + int sectsz[] = CONFIG_SYS_FLASH_SECTSZ; + int sect; + + if (base != CONFIG_SYS_FLASH_BASE) + return 0; + + info->size = 0; + info->sector_count = CONFIG_SYS_MAX_FLASH_SECT; + /* set each sector's start address and size based */ + for (sect = 0; sect < CONFIG_SYS_MAX_FLASH_SECT; sect++) { + info->start[sect] = base+info->size; + info->size += sectsz[sect]; + } + /* This flash must be accessed in 8-bits mode, no buffer. */ + info->flash_id = 0x01000000; + info->portwidth = FLASH_CFI_8BIT; + info->chipwidth = FLASH_CFI_BY8; + info->buffer_size = 0; + /* timings are derived from the Macronix datasheet. */ + info->erase_blk_tout = 1000; + info->write_tout = 10; + info->buffer_write_tout = 300; + /* Commands and addresses are for AMD mode 8-bit access. */ + info->vendor = CFI_CMDSET_AMD_LEGACY; + info->cmd_reset = 0xF0; + info->interface = FLASH_CFI_X8; + info->legacy_unlock = 0; + info->ext_addr = 0; + info->addr_unlock1 = 0x00000aaa; + info->addr_unlock2 = 0x00000555; + /* Manufacturer Macronix, device MX29LV400CB, CFI 1.3. */ + info->manufacturer_id = 0x22; + info->device_id = 0xBA; + info->device_id2 = 0; + info->cfi_version = 0x3133; + info->cfi_offset = 0x0000; + info->name = "MX29LV400CB"; + + return 1; +} +#endif /* CONFIG_SYS_FLASH_CFI */ + +int board_init(void) +{ + /* arch number of board */ + gd->bd->bi_arch_number = MACH_TYPE_EDMINI_V2; + + /* boot parameter start at 256th byte of RAM base */ + gd->bd->bi_boot_params = gd->bd->bi_dram[0].start + 0x100; + + return 0; +} diff --git a/board/LaCie/edminiv2/edminiv2.h b/board/LaCie/edminiv2/edminiv2.h new file mode 100644 index 0000000..3e20b61 --- /dev/null +++ b/board/LaCie/edminiv2/edminiv2.h @@ -0,0 +1,54 @@ +/* + * Copyright (C) 2010 Albert ARIBAUD + * + * (C) Copyright 2009 + * Marvell Semiconductor + * Written-by: Prafulla Wadaskar + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, + * MA 02110-1301 USA + */ + +#ifndef __EDMINIV2_H +#define __EDMINIV2_H + +/* + * Board-specific values for Orion5x MPP low level init: + * - MPPs 12 to 15 are SATA LEDs (mode 5) + * - Others are GPIO/unused (mode 3 for MPP0, mode 5 for + * MPP16 to MPP19, mode 0 for others + */ + +#define EDMINIV2_MPP0_7 0x00000003 +#define EDMINIV2_MPP8_15 0x55550000 +#define EDMINIV2_MPP16_23 0x00000000 + +/* + * Board-specific values for Orion5x GPIO low level init: + * - GPIO3 is input (RTC interrupt) + * - GPIO16 is Power LED control (0 = on, 1 = off) + * - GPIO17 is Power LED source select (0 = CPLD, 1 = GPIO16) + * - GPIO18 is Power Button status (0 = Released, 1 = Pressed) + * - Last GPIO is 26, further bits are supposed to be 0. + * Enable mask has ones for INPUT, 0 for OUTPUT. + * Default is LED ON. + */ + +#define EDMINIV2_GPIO_OUT_ENABLE 0x03fcffff + +#endif /* __EDMINIV2_H */ diff --git a/include/configs/edminiv2.h b/include/configs/edminiv2.h new file mode 100644 index 0000000..d0f9aea --- /dev/null +++ b/include/configs/edminiv2.h @@ -0,0 +1,147 @@ +/* + * Copyright (C) 2010 Albert ARIBAUD + * + * Based on original Kirkwood support which is + * (C) Copyright 2009 + * Marvell Semiconductor + * Written-by: Prafulla Wadaskar + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, + * MA 02110-1301 USA + */ + +#ifndef _CONFIG_EDMINIV2_H +#define _CONFIG_EDMINIV2_H + +/* + * Version number information + */ + +#define CONFIG_IDENT_STRING " EDMiniV2" + +/* + * High Level Configuration Options (easy to change) + */ + +#define CONFIG_MARVELL 1 +#define CONFIG_ARM926EJS 1 /* Basic Architecture */ +#define CONFIG_FEROCEON 1 /* CPU Core subversion */ +#define CONFIG_ORION5X 1 /* SOC Family Name */ +#define CONFIG_88F5182 1 /* SOC Name */ +#define CONFIG_MACH_EDMINIV2 1 /* Machine type */ + +/* + * CLKs configurations + */ + +#define CONFIG_SYS_HZ 1000 + +/* + * NS16550 Configuration + */ + +#define CONFIG_SYS_NS16550 +#define CONFIG_SYS_NS16550_SERIAL +#define CONFIG_SYS_NS16550_REG_SIZE (-4) +#define CONFIG_SYS_NS16550_CLK CONFIG_SYS_TCLK +#define CONFIG_SYS_NS16550_COM1 ORION5X_UART0_BASE + +/* + * Serial Port configuration + * The following definitions let you select what serial you want to use + * for your console driver. + */ + +#define CONFIG_CONS_INDEX 1 /*Console on UART0 */ +#define CONFIG_BAUDRATE 115200 +#define CONFIG_SYS_BAUDRATE_TABLE \ + { 9600, 19200, 38400, 57600, 115200, 230400, 460800, 921600 } + +/* + * FLASH configuration + */ + +#define CONFIG_SYS_FLASH_CFI +#define CONFIG_FLASH_CFI_DRIVER +#define CONFIG_FLASH_CFI_LEGACY +#define CONFIG_SYS_MAX_FLASH_BANKS 1 /* max num of flash banks */ +#define CONFIG_SYS_MAX_FLASH_SECT 11 /* max num of sects on one chip */ +#define CONFIG_SYS_FLASH_BASE 0xfff80000 +#define CONFIG_SYS_FLASH_SECTSZ \ + {16384, 8192, 8192, 32768, \ + 65536, 65536, 65536, 65536, 65536, 65536, 65536} + +/* auto boot */ +#define CONFIG_BOOTDELAY 3 /* default enable autoboot */ + +/* + * For booting Linux, the board info and command line data + * have to be in the first 8 MB of memory, since this is + * the maximum mapped by the Linux kernel during initialization. + */ +#define CONFIG_CMDLINE_TAG 1 /* enable passing of ATAGs */ +#define CONFIG_INITRD_TAG 1 /* enable INITRD tag */ +#define CONFIG_SETUP_MEMORY_TAGS 1 /* enable memory tag */ + +#define CONFIG_SYS_PROMPT "EDMiniV2> " /* Command Prompt */ +#define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buff Size */ +#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE \ + +sizeof(CONFIG_SYS_PROMPT) + 16) /* Print Buff */ +/* + * Commands configuration - using default command set for now + */ +#include +/* + * Disabling some default commands for staggered bring-up + */ +#undef CONFIG_CMD_BOOTD /* no bootd since no net */ +#undef CONFIG_CMD_NET /* no net since no eth */ +#undef CONFIG_CMD_NFS /* no NFS since no net */ + +/* + * Environment variables configurations + */ +#define CONFIG_ENV_IS_IN_FLASH 1 +#define CONFIG_ENV_SECT_SIZE 0x2000 /* 16K */ +#define CONFIG_ENV_SIZE 0x2000 +#define CONFIG_ENV_OFFSET 0x4000 /* env starts here */ + +/* + * Size of malloc() pool + */ +#define CONFIG_SYS_MALLOC_LEN (1024 * 128) /* 128kB for malloc() */ +/* size in bytes reserved for initial data */ +#define CONFIG_SYS_GBL_DATA_SIZE 128 + +/* + * Other required minimal configurations + */ +#define CONFIG_CONSOLE_INFO_QUIET /* some code reduction */ +#define CONFIG_ARCH_CPU_INIT /* call arch_cpu_init() */ +#define CONFIG_ARCH_MISC_INIT /* call arch_misc_init() */ +#define CONFIG_DISPLAY_CPUINFO /* Display cpu info */ +#define CONFIG_NR_DRAM_BANKS 1 + +#define CONFIG_STACKSIZE 0x00100000 +#define CONFIG_SYS_LOAD_ADDR 0x00800000 +#define CONFIG_SYS_MEMTEST_START 0x00400000 +#define CONFIG_SYS_MEMTEST_END 0x007fffff +#define CONFIG_SYS_RESET_ADDRESS 0xffff0000 +#define CONFIG_SYS_MAXARGS 16 + +#endif /* _CONFIG_EDMINIV2_H */ -- 1.6.4.4