From: Ajay Kumar Gupta <ajay.gupta@ti.com>
To: u-boot@lists.denx.de
Subject: [U-Boot] [PATCH 2/4 v2] musb: MSC host support for AM35x
Date: Fri, 9 Jul 2010 11:43:48 +0530 [thread overview]
Message-ID: <1278656030-31684-3-git-send-email-ajay.gupta@ti.com> (raw)
In-Reply-To: <1278656030-31684-2-git-send-email-ajay.gupta@ti.com>
Tested MSC Host on AM3517EVM.
Signed-off-by: Ajay Kumar Gupta <ajay.gupta@ti.com>
---
drivers/usb/musb/Makefile | 1 +
drivers/usb/musb/am35x.c | 118 +++++++++++++++++++++++++++++++++++++++++++
drivers/usb/musb/am35x.h | 94 ++++++++++++++++++++++++++++++++++
drivers/usb/musb/musb_udc.c | 2 +
include/usb.h | 2 +-
5 files changed, 216 insertions(+), 1 deletions(-)
create mode 100644 drivers/usb/musb/am35x.c
create mode 100644 drivers/usb/musb/am35x.h
diff --git a/drivers/usb/musb/Makefile b/drivers/usb/musb/Makefile
index 397f5fe..7d23e06 100644
--- a/drivers/usb/musb/Makefile
+++ b/drivers/usb/musb/Makefile
@@ -31,6 +31,7 @@ COBJS-$(CONFIG_USB_BLACKFIN) += blackfin_usb.o
COBJS-$(CONFIG_USB_DAVINCI) += davinci.o
COBJS-$(CONFIG_USB_OMAP3) += omap3.o
COBJS-$(CONFIG_USB_DA8XX) += da8xx.o
+COBJS-$(CONFIG_USB_AM35X) += am35x.o
COBJS := $(COBJS-y)
SRCS := $(COBJS:.o=.c)
diff --git a/drivers/usb/musb/am35x.c b/drivers/usb/musb/am35x.c
new file mode 100644
index 0000000..2024940
--- /dev/null
+++ b/drivers/usb/musb/am35x.c
@@ -0,0 +1,118 @@
+/*
+ * am35x.c - TI's AM35x platform specific usb wrapper functions.
+ *
+ * Author: Ajay Kumar Gupta <ajay.gupta@ti.com>
+ *
+ * Based on drivers/usb/musb/da8xx.c
+ *
+ * Copyright (c) 2010 Texas Instruments Incorporated
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+#include <common.h>
+
+#include "am35x.h"
+
+/* MUSB platform configuration */
+struct musb_config musb_cfg = {
+ .regs = (struct musb_regs *)AM35X_USB_OTG_CORE_BASE,
+ .timeout = AM35X_USB_OTG_TIMEOUT,
+ .musb_speed = 0,
+};
+
+/*
+ * Enable the USB phy
+ */
+static u8 phy_on(void)
+{
+ u32 devconf2;
+ u32 timeout;
+
+ devconf2 = readl(&am35x_scm_general_regs->devconf2);
+
+ devconf2 &= ~(DEVCONF2_RESET | DEVCONF2_PHYPWRDN | DEVCONF2_OTGPWRDN |
+ DEVCONF2_OTGMODE | DEVCONF2_REFFREQ |
+ DEVCONF2_PHY_GPIOMODE);
+ devconf2 |= DEVCONF2_SESENDEN | DEVCONF2_VBDTCTEN | DEVCONF2_PHY_PLLON |
+ DEVCONF2_REFFREQ_13MHZ | DEVCONF2_DATPOL;
+
+ writel(devconf2, &am35x_scm_general_regs->devconf2);
+
+ /* wait until the USB phy is turned on */
+ timeout = musb_cfg.timeout;
+ while (timeout--)
+ if (readl(&am35x_scm_general_regs->devconf2) & DEVCONF2_PHYCKGD)
+ return 1;
+
+ /* USB phy was not turned on */
+ return 0;
+}
+
+/*
+ * Disable the USB phy
+ */
+static void phy_off(void)
+{
+ u32 devconf2;
+
+ /*
+ * Power down the on-chip PHY.
+ */
+ devconf2 = readl(&am35x_scm_general_regs->devconf2);
+
+ devconf2 &= ~DEVCONF2_PHY_PLLON;
+ devconf2 |= DEVCONF2_PHYPWRDN | DEVCONF2_OTGPWRDN;
+ writel(devconf2, &am35x_scm_general_regs->devconf2);
+}
+
+/*
+ * This function performs platform specific initialization for usb0.
+ */
+int musb_platform_init(void)
+{
+ u32 revision;
+ u32 sw_reset;
+
+ /* global usb reset */
+ sw_reset = readl(&am35x_scm_general_regs->ip_sw_reset);
+ sw_reset |= (1 << 0);
+ writel(sw_reset, &am35x_scm_general_regs->ip_sw_reset);
+ sw_reset &= ~(1 << 0);
+ writel(sw_reset, &am35x_scm_general_regs->ip_sw_reset);
+
+ /* reset the controller */
+ writel(0x1, &am35x_usb_regs->control);
+ udelay(5000);
+
+ /* start the on-chip usb phy and its pll */
+ if (phy_on() == 0)
+ return -1;
+
+ /* Returns zero if e.g. not clocked */
+ revision = readl(&am35x_usb_regs->revision);
+ if (revision == 0)
+ return -1;
+
+ return 0;
+}
+
+/*
+ * This function performs platform specific deinitialization for usb0.
+ */
+void musb_platform_deinit(void)
+{
+ /* Turn off the phy */
+ phy_off();
+}
diff --git a/drivers/usb/musb/am35x.h b/drivers/usb/musb/am35x.h
new file mode 100644
index 0000000..756c3ae
--- /dev/null
+++ b/drivers/usb/musb/am35x.h
@@ -0,0 +1,94 @@
+/*
+ * am35x.h - TI's AM35x platform specific usb wrapper definitions.
+ *
+ * Author: Ajay Kumar Gupta <ajay.gupta@ti.com>
+ *
+ * Based on drivers/usb/musb/da8xx.h
+ *
+ * Copyright (c) 2010 Texas Instruments Incorporated
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#ifndef __AM35X_USB_H__
+#define __AM35X_USB_H__
+
+#include <asm/arch/am35x_def.h>
+#include "musb_core.h"
+
+/* Base address of musb wrapper */
+#define AM35X_USB_OTG_BASE 0x5C040000
+
+/* Base address of musb core */
+#define AM35X_USB_OTG_CORE_BASE (AM35X_USB_OTG_BASE + 0x400)
+
+/* Timeout for AM35x usb module */
+#define AM35X_USB_OTG_TIMEOUT 0x3FFFFFF
+
+/*
+ * AM35x platform USB wrapper register overlay.
+ */
+struct am35x_usb_regs {
+ u32 revision;
+ u32 control;
+ u32 status;
+ u32 emulation;
+ u32 reserved0[1];
+ u32 autoreq;
+ u32 srpfixtime;
+ u32 ep_intsrc;
+ u32 ep_intsrcset;
+ u32 ep_intsrcclr;
+ u32 ep_intmsk;
+ u32 ep_intmskset;
+ u32 ep_intmskclr;
+ u32 ep_intsrcmsked;
+ u32 reserved1[1];
+ u32 core_intsrc;
+ u32 core_intsrcset;
+ u32 core_intsrcclr;
+ u32 core_intmsk;
+ u32 core_intmskset;
+ u32 core_intmskclr;
+ u32 core_intsrcmsked;
+ u32 reserved2[1];
+ u32 eoi;
+ u32 mop_sop_en;
+ u32 reserved3[2];
+ u32 txmode;
+ u32 rxmode;
+ u32 epcount_mode;
+};
+
+#define am35x_usb_regs ((struct am35x_usb_regs *)AM35X_USB_OTG_BASE)
+
+/* USB 2.0 PHY Control */
+#define DEVCONF2_PHY_GPIOMODE (1 << 23)
+#define DEVCONF2_OTGMODE (3 << 14)
+#define DEVCONF2_SESENDEN (1 << 13) /* Vsess_end comparator */
+#define DEVCONF2_VBDTCTEN (1 << 12) /* Vbus comparator */
+#define DEVCONF2_REFFREQ_24MHZ (2 << 8)
+#define DEVCONF2_REFFREQ_26MHZ (7 << 8)
+#define DEVCONF2_REFFREQ_13MHZ (6 << 8)
+#define DEVCONF2_REFFREQ (0xf << 8)
+#define DEVCONF2_PHYCKGD (1 << 7)
+#define DEVCONF2_VBUSSENSE (1 << 6)
+#define DEVCONF2_PHY_PLLON (1 << 5) /* override PLL suspend */
+#define DEVCONF2_RESET (1 << 4)
+#define DEVCONF2_PHYPWRDN (1 << 3)
+#define DEVCONF2_OTGPWRDN (1 << 2)
+#define DEVCONF2_DATPOL (1 << 1)
+
+#endif /* __AM35X_USB_H__ */
diff --git a/drivers/usb/musb/musb_udc.c b/drivers/usb/musb/musb_udc.c
index fc43cf4..6f6ed61 100644
--- a/drivers/usb/musb/musb_udc.c
+++ b/drivers/usb/musb/musb_udc.c
@@ -57,6 +57,8 @@
#include "musb_core.h"
#if defined(CONFIG_USB_OMAP3)
#include "omap3.h"
+#elif defined(CONFIG_USB_AM35X)
+#include "am35x.h"
#elif defined(CONFIG_USB_DAVINCI)
#include "davinci.h"
#endif
diff --git a/include/usb.h b/include/usb.h
index bc4ccfe..afd65e3 100644
--- a/include/usb.h
+++ b/include/usb.h
@@ -133,7 +133,7 @@ struct usb_device {
defined(CONFIG_USB_SL811HS) || defined(CONFIG_USB_ISP116X_HCD) || \
defined(CONFIG_USB_R8A66597_HCD) || defined(CONFIG_USB_DAVINCI) || \
defined(CONFIG_USB_OMAP3) || defined(CONFIG_USB_DA8XX) || \
- defined(CONFIG_USB_BLACKFIN)
+ defined(CONFIG_USB_BLACKFIN) || defined(CONFIG_USB_AM35X)
int usb_lowlevel_init(void);
int usb_lowlevel_stop(void);
--
1.6.2.4
next prev parent reply other threads:[~2010-07-09 6:13 UTC|newest]
Thread overview: 14+ messages / expand[flat|nested] mbox.gz Atom feed top
2010-07-09 6:13 [U-Boot] [PATCH 0/4 v2] AM35X: Add musb support Ajay Kumar Gupta
2010-07-09 6:13 ` [U-Boot] [PATCH 1/4 v2] AM35x: Adding SCM general register definitions Ajay Kumar Gupta
2010-07-09 6:13 ` Ajay Kumar Gupta [this message]
2010-07-09 6:13 ` [U-Boot] [PATCH 3/4 v2] musb: am35x: Workaround for fifo read issue Ajay Kumar Gupta
2010-07-09 6:13 ` [U-Boot] [PATCH 4/4] AM3517EVM: musb: add usb config Ajay Kumar Gupta
2010-08-01 11:16 ` [U-Boot] [PATCH 3/4 v2] musb: am35x: Workaround for fifo read issue Remy Bohmer
2010-08-01 11:16 ` [U-Boot] [PATCH 2/4 v2] musb: MSC host support for AM35x Remy Bohmer
2010-08-02 4:19 ` Gupta, Ajay Kumar
2010-08-08 21:06 ` Wolfgang Denk
2010-08-09 13:48 ` Remy Bohmer
2010-07-16 4:44 ` [U-Boot] [PATCH 0/4 v2] AM35X: Add musb support Gupta, Ajay Kumar
2010-07-16 19:08 ` Paulraj, Sandeep
2010-07-19 11:59 ` Gupta, Ajay Kumar
2010-08-02 8:18 ` Remy Bohmer
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1278656030-31684-3-git-send-email-ajay.gupta@ti.com \
--to=ajay.gupta@ti.com \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.