All of lore.kernel.org
 help / color / mirror / Atom feed
From: Maxim Levitsky <maximlevitsky@gmail.com>
To: linux-mmc@vger.kernel.org
Cc: Andrew Morton <akpm@linux-foundation.org>,
	Lee Jones <lee.jones@canonical.com>,
	Adrian Hunter <adrian.hunter@nokia.com>,
	Maxim Levitsky <maximlevitsky@gmail.com>,
	Andrew de Quincey <adq_dvb@lidskialf.net>
Subject: [PATCH 1/2] MMC: make sdhci work with ricoh mmc controller
Date: Fri, 30 Jul 2010 16:57:28 +0300	[thread overview]
Message-ID: <1280498249-6845-2-git-send-email-maximlevitsky@gmail.com> (raw)
In-Reply-To: <1280498249-6845-1-git-send-email-maximlevitsky@gmail.com>

The current way of disabling it is not well tested by vendor
and has all kinds of bugs that show up on resume from ram/disk.
A very good example is a dead SDHCI controller.

Old way of disabling is still supported by
continuing to use CONFIG_MMC_RICOH_MMC.

Based on 'http://list.drzeus.cx/pipermail/sdhci-devel/2007-December/002085.html'
Therefore most of the credit for this goes to Andrew de Quincey

CC: Andrew de Quincey <adq_dvb@lidskialf.net>

Signed-off-by: Maxim Levitsky <maximlevitsky@gmail.com>
Acked-by: Philip Langdale <philipl@overt.org>
---
 drivers/mmc/host/sdhci-pci.c |   41 +++++++++++++++++++++++++++++++++++++++++
 drivers/mmc/host/sdhci.c     |    3 ++-
 drivers/mmc/host/sdhci.h     |    4 ++++
 3 files changed, 47 insertions(+), 1 deletions(-)

diff --git a/drivers/mmc/host/sdhci-pci.c b/drivers/mmc/host/sdhci-pci.c
index 65483fd..e021431 100644
--- a/drivers/mmc/host/sdhci-pci.c
+++ b/drivers/mmc/host/sdhci-pci.c
@@ -17,6 +17,7 @@
 #include <linux/pci.h>
 #include <linux/dma-mapping.h>
 #include <linux/slab.h>
+#include <linux/device.h>
 
 #include <linux/mmc/host.h>
 
@@ -84,7 +85,30 @@ static int ricoh_probe(struct sdhci_pci_chip *chip)
 	if (chip->pdev->subsystem_vendor == PCI_VENDOR_ID_SAMSUNG ||
 	    chip->pdev->subsystem_vendor == PCI_VENDOR_ID_SONY)
 		chip->quirks |= SDHCI_QUIRK_NO_CARD_NO_RESET;
+	return 0;
+}
+
+static int ricoh_mmc_probe_slot(struct sdhci_pci_slot *slot)
+{
+	slot->host->caps =
+		((0x21 << SDHCI_TIMEOUT_CLK_SHIFT)
+			& SDHCI_TIMEOUT_CLK_MASK) |
+
+		((0x21 << SDHCI_CLOCK_BASE_SHIFT)
+			& SDHCI_CLOCK_BASE_MASK) |
 
+		SDHCI_TIMEOUT_CLK_UNIT |
+		SDHCI_CAN_VDD_330 |
+		SDHCI_CAN_DO_SDMA;
+	return 0;
+}
+
+static int ricoh_mmc_resume(struct sdhci_pci_chip *chip)
+{
+	/* Apply a delay to allow controller to settle */
+	/* Otherwise it becomes confused if card state changed
+		during suspend */
+	msleep(500);
 	return 0;
 }
 
@@ -95,6 +119,15 @@ static const struct sdhci_pci_fixes sdhci_ricoh = {
 			  SDHCI_QUIRK_CLOCK_BEFORE_RESET,
 };
 
+static const struct sdhci_pci_fixes sdhci_ricoh_mmc = {
+	.probe_slot	= ricoh_mmc_probe_slot,
+	.resume		= ricoh_mmc_resume,
+	.quirks		= SDHCI_QUIRK_32BIT_DMA_ADDR |
+			  SDHCI_QUIRK_CLOCK_BEFORE_RESET |
+			  SDHCI_QUIRK_NO_CARD_NO_RESET |
+			  SDHCI_QUIRK_MISSING_CAPS
+};
+
 static const struct sdhci_pci_fixes sdhci_ene_712 = {
 	.quirks		= SDHCI_QUIRK_SINGLE_POWER_WRITE |
 			  SDHCI_QUIRK_BROKEN_DMA,
@@ -374,6 +407,14 @@ static const struct pci_device_id pci_ids[] __devinitdata = {
 	},
 
 	{
+		.vendor         = PCI_VENDOR_ID_RICOH,
+		.device         = 0x843,
+		.subvendor      = PCI_ANY_ID,
+		.subdevice      = PCI_ANY_ID,
+		.driver_data    = (kernel_ulong_t)&sdhci_ricoh_mmc,
+	},
+
+	{
 		.vendor		= PCI_VENDOR_ID_ENE,
 		.device		= PCI_DEVICE_ID_ENE_CB712_SD,
 		.subvendor	= PCI_ANY_ID,
diff --git a/drivers/mmc/host/sdhci.c b/drivers/mmc/host/sdhci.c
index c6d1bd8..483b78e 100644
--- a/drivers/mmc/host/sdhci.c
+++ b/drivers/mmc/host/sdhci.c
@@ -1687,7 +1687,8 @@ int sdhci_add_host(struct sdhci_host *host)
 			host->version);
 	}
 
-	caps = sdhci_readl(host, SDHCI_CAPABILITIES);
+	caps = (host->quirks & SDHCI_QUIRK_MISSING_CAPS) ? host->caps :
+		sdhci_readl(host, SDHCI_CAPABILITIES);
 
 	if (host->quirks & SDHCI_QUIRK_FORCE_DMA)
 		host->flags |= SDHCI_USE_SDMA;
diff --git a/drivers/mmc/host/sdhci.h b/drivers/mmc/host/sdhci.h
index c846813..b1839a3 100644
--- a/drivers/mmc/host/sdhci.h
+++ b/drivers/mmc/host/sdhci.h
@@ -240,6 +240,8 @@ struct sdhci_host {
 #define SDHCI_QUIRK_CAP_CLOCK_BASE_BROKEN		(1<<25)
 /* Controller cannot support End Attribute in NOP ADMA descriptor */
 #define SDHCI_QUIRK_NO_ENDATTR_IN_NOPDESC		(1<<26)
+/* Controller is missing device caps. Use caps provided by host */
+#define SDHCI_QUIRK_MISSING_CAPS			(1<<27)
 
 	int			irq;		/* Device IRQ */
 	void __iomem *		ioaddr;		/* Mapped address */
@@ -292,6 +294,8 @@ struct sdhci_host {
 
 	struct timer_list	timer;		/* Timer for timeouts */
 
+	unsigned int		caps;		/* Alternative capabilities */
+
 	unsigned long		private[0] ____cacheline_aligned;
 };
 
-- 
1.7.0.4


  reply	other threads:[~2010-07-30 13:57 UTC|newest]

Thread overview: 10+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2010-07-30 13:57 MMC: [PATCH 0/2] Two fixes for mmc system Maxim Levitsky
2010-07-30 13:57 ` Maxim Levitsky [this message]
2010-07-30 13:57 ` [PATCH 2/2] MMC: fix all hangs related to mmc/sd card insert/removal during suspend/resume Maxim Levitsky
  -- strict thread matches above, loose matches on Subject: below --
2010-07-31 12:37 MMC: [PATCH 0/2 v2] Two fixes for mmc system Maxim Levitsky
2010-07-31 12:37 ` [PATCH 1/2] MMC: make sdhci work with ricoh mmc controller Maxim Levitsky
2010-06-06 21:24 [PATCH] mmc: " Maxim Levitsky
2010-06-06 21:28 ` [PATCH 1/2] " Maxim Levitsky
2010-06-06 21:28   ` Maxim Levitsky
2010-06-06 23:11   ` Philip Langdale
2010-06-06 23:11     ` Philip Langdale
2010-06-07  0:37     ` Maxim Levitsky
2010-06-07  1:41       ` Philip Langdale

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1280498249-6845-2-git-send-email-maximlevitsky@gmail.com \
    --to=maximlevitsky@gmail.com \
    --cc=adq_dvb@lidskialf.net \
    --cc=adrian.hunter@nokia.com \
    --cc=akpm@linux-foundation.org \
    --cc=lee.jones@canonical.com \
    --cc=linux-mmc@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.