From mboxrd@z Thu Jan 1 00:00:00 1970 Return-path: Received: from proofpoint-cluster.metrocast.net ([65.175.128.136]:20174 "EHLO proofpoint-cluster.metrocast.net" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1759313Ab0HFMWo (ORCPT ); Fri, 6 Aug 2010 08:22:44 -0400 Subject: Re: Fwd: No audio in HW Compressed MPEG2 container on HVR-1300 From: Andy Walls To: lawrence rust Cc: Shane Harrison , linux-media@vger.kernel.org In-Reply-To: <1281087650.1332.26.camel@gagarin> References: <1280741544.1361.17.camel@gagarin> <1280750394.1361.87.camel@gagarin> <1280843299.1492.127.camel@gagarin> <1281087650.1332.26.camel@gagarin> Content-Type: text/plain; charset="UTF-8" Date: Fri, 06 Aug 2010 08:22:19 -0400 Message-ID: <1281097339.2052.17.camel@morgan.silverblock.net> Mime-Version: 1.0 Content-Transfer-Encoding: 7bit Sender: linux-media-owner@vger.kernel.org List-ID: On Fri, 2010-08-06 at 11:40 +0200, lawrence rust wrote: > On Fri, 2010-08-06 at 11:49 +1200, Shane Harrison wrote: > > Well still no luck this end. Have done the following: > > 2) Applied the patch - no change (we were detecting the WM8775 OK BTW, I forgot to mention the ivtv driver uses the WM8775 module for the PVR-150 card. Changes to that module that affect the default setting needs to be done in a way that doesn't break the PVR-150. Maybe a .s_config() method in the WM8775 v4l2_subdev_core_ops would be the way to do that, or by passing parameters in struct i2c_board_info (according to a recent post by Hans Verkuil). Regards, Andy