All of lore.kernel.org
 help / color / mirror / Atom feed
From: Cyril Chemparathy <cyril@ti.com>
To: linux-input@vger.kernel.org,
	davinci-linux-open-source@linux.davincidsp.com
Cc: Cyril Chemparathy <cyril@ti.com>
Subject: [PATCH 2/7] input: add driver for tnetv107x on-chip keypad controller
Date: Mon, 13 Sep 2010 12:29:43 -0400	[thread overview]
Message-ID: <1284395388-32687-3-git-send-email-cyril@ti.com> (raw)
In-Reply-To: <1284395388-32687-1-git-send-email-cyril@ti.com>

This patch adds support for tnetv107x's on-chip keypad controller.

Signed-off-by: Cyril Chemparathy <cyril@ti.com>
---
 drivers/input/keyboard/Kconfig            |    9 +
 drivers/input/keyboard/Makefile           |    1 +
 drivers/input/keyboard/tnetv107x-keypad.c |  324 +++++++++++++++++++++++++++++
 3 files changed, 334 insertions(+), 0 deletions(-)
 create mode 100644 drivers/input/keyboard/tnetv107x-keypad.c

diff --git a/drivers/input/keyboard/Kconfig b/drivers/input/keyboard/Kconfig
index 9cc488d..0ea8648 100644
--- a/drivers/input/keyboard/Kconfig
+++ b/drivers/input/keyboard/Kconfig
@@ -457,4 +457,13 @@ config KEYBOARD_W90P910
 	  To compile this driver as a module, choose M here: the
 	  module will be called w90p910_keypad.
 
+config KEYBOARD_TNETV107X
+	tristate "TI TNETV107X keypad support"
+	depends on ARCH_DAVINCI_TNETV107X
+	help
+	  Say Y here if you want to use the TNETV107X keypad.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called tnetv107x-keypad.
+
 endif
diff --git a/drivers/input/keyboard/Makefile b/drivers/input/keyboard/Makefile
index 504b591..63261b0 100644
--- a/drivers/input/keyboard/Makefile
+++ b/drivers/input/keyboard/Makefile
@@ -41,3 +41,4 @@ obj-$(CONFIG_KEYBOARD_SUNKBD)		+= sunkbd.o
 obj-$(CONFIG_KEYBOARD_TWL4030)		+= twl4030_keypad.o
 obj-$(CONFIG_KEYBOARD_XTKBD)		+= xtkbd.o
 obj-$(CONFIG_KEYBOARD_W90P910)		+= w90p910_keypad.o
+obj-$(CONFIG_KEYBOARD_TNETV107X)	+= tnetv107x-keypad.o
diff --git a/drivers/input/keyboard/tnetv107x-keypad.c b/drivers/input/keyboard/tnetv107x-keypad.c
new file mode 100644
index 0000000..5039164
--- /dev/null
+++ b/drivers/input/keyboard/tnetv107x-keypad.c
@@ -0,0 +1,324 @@
+/*
+ * Texas Instruments TNETV107X Keypad Driver
+ *
+ * Copyright (C) 2010 Texas Instruments
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation version 2.
+ *
+ * This program is distributed "as is" WITHOUT ANY WARRANTY of any
+ * kind, whether express or implied; without even the implied warranty
+ * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/kernel.h>
+#include <linux/errno.h>
+#include <linux/input.h>
+#include <linux/platform_device.h>
+#include <linux/interrupt.h>
+#include <linux/slab.h>
+#include <linux/delay.h>
+#include <linux/io.h>
+#include <linux/clk.h>
+
+#include <mach/tnetv107x.h>
+
+#define KEYPAD_ROWS		9
+#define KEYPAD_COLS		9
+
+struct keypad_regs {
+	u32	rev;
+	u32	mode;
+	u32	mask;
+	u32	pol;
+	u32	dclock;
+	u32	rclock;
+	u32	stable_cnt;
+	u32	in_en;
+	u32	out;
+	u32	out_en;
+	u32	in;
+	u32	lock;
+	u32	pres[3];
+};
+
+#define keypad_read(kp, reg)		__raw_readl(&(kp)->regs->reg)
+#define keypad_write(kp, reg, val)	__raw_writel(val, &(kp)->regs->reg)
+
+struct keypad_data {
+	struct tnetv107x_keypad_data	data;
+	struct input_dev		*input_dev;
+	struct resource			*res;
+	struct keypad_regs __iomem	*regs;
+	struct clk			*clk;
+	struct device			*dev;
+	u32				irq_press;
+	u32				irq_release;
+	u32				curr_keys[3];
+	u32				prev_keys[3];
+};
+
+static void handle_change(struct keypad_data *kp)
+{
+	int bit, i;
+
+	for (bit = 0; bit < (KEYPAD_ROWS * KEYPAD_COLS); bit++) {
+		int idx		= bit / 32;
+		u32 mask	= 1 << (bit % 32);
+		u32 curr	= kp->curr_keys[idx] & mask;
+		u32 prev	= kp->prev_keys[idx] & mask;
+		int row		= bit / KEYPAD_COLS;
+		int col		= bit % KEYPAD_COLS;
+		int ofs		= row * kp->data.cols + col;
+
+		if (col >= kp->data.cols || row >= kp->data.rows)
+			continue;
+
+		if (curr && !prev) {
+			/* Report key press */
+			if (kp->data.keynames && kp->data.keynames[ofs])
+				dev_dbg(kp->dev, "%s (%d) pressed\n",
+					kp->data.keynames[ofs], ofs);
+			input_report_key(kp->input_dev,
+					 kp->data.keymap[ofs], 1);
+		} else if (!curr && prev) {
+			/* Report key release */
+			if (kp->data.keynames && kp->data.keynames[ofs])
+				dev_dbg(kp->dev, "%s (%d) released\n",
+					kp->data.keynames[ofs], ofs);
+			input_report_key(kp->input_dev,
+					 kp->data.keymap[ofs], 0);
+		}
+	}
+
+	/* Update shadow copy */
+	for (i = 0; i < 3; i++)
+		kp->prev_keys[i] = kp->curr_keys[i];
+
+	input_sync(kp->input_dev);
+}
+
+static irqreturn_t keypad_irq_press(int irq, void *data)
+{
+	struct keypad_data *kp = (struct keypad_data *)data;
+	int i;
+
+	for (i = 0; i < 3; i++)
+		kp->curr_keys[i] = keypad_read(kp, pres[i]);
+	handle_change(kp);
+	keypad_write(kp, lock, 0); /* Allow hardware updates */
+	return IRQ_HANDLED;
+}
+
+static irqreturn_t keypad_irq_release(int irq, void *data)
+{
+	struct keypad_data *kp = (struct keypad_data *)data;
+	int i;
+
+	/* Hardware says all keys have been released */
+	for (i = 0; i < 3; i++)
+		kp->curr_keys[i] = 0;
+	handle_change(kp);
+	return IRQ_HANDLED;
+}
+
+static int tnetv107x_keypad_probe(struct platform_device *pdev)
+{
+	struct tnetv107x_keypad_data *pdata = pdev->dev.platform_data;
+	struct device *dev = &pdev->dev;
+	struct keypad_data *kp;
+	int i, ret = 0;
+	u32 rev = 0;
+
+	ret = -EINVAL;
+	if (!pdata) {
+		dev_err(dev, "cannot find device data\n");
+		return ret;
+	}
+
+	ret = -ENOMEM;
+	kp = kzalloc(sizeof(struct keypad_data), GFP_KERNEL);
+	if (!kp) {
+		dev_err(dev, "cannot allocate device info\n");
+		return ret;
+	}
+
+	dev_set_drvdata(dev, kp);
+	kp->data = *pdata;
+	kp->dev = dev;
+
+	ret = -ENOMEM;
+	kp->input_dev = input_allocate_device();
+	if (!kp->input_dev) {
+		dev_err(dev, "cannot allocate input device\n");
+		goto error0;
+	}
+
+	ret = -ENODEV;
+	kp->irq_press   = platform_get_irq_byname(pdev, "press");
+	kp->irq_release = platform_get_irq_byname(pdev, "release");
+	if (kp->irq_press < 0 || kp->irq_release < 0) {
+		dev_err(dev, "cannot determine device interrupts\n");
+		goto error1;
+	}
+
+	ret = -ENODEV;
+	kp->res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	if (!kp->res) {
+		dev_err(dev, "cannot determine register area\n");
+		goto error1;
+	}
+
+	ret = -EINVAL;
+	if (!request_mem_region(kp->res->start, resource_size(kp->res),
+				pdev->name)) {
+		dev_err(dev, "cannot claim register memory\n");
+		goto error1;
+	}
+
+	ret = -ENOMEM;
+	kp->regs = ioremap(kp->res->start, resource_size(kp->res));
+	if (!kp->regs) {
+		dev_err(dev, "cannot map register memory\n");
+		goto error2;
+	}
+
+	ret = -EINVAL;
+	kp->clk = clk_get(dev, NULL);
+	if (!kp->clk) {
+		dev_err(dev, "cannot claim device clock\n");
+		goto error3;
+	}
+	clk_enable(kp->clk);
+
+	/* Initialize device registers */
+	keypad_write(kp, mode, 0);
+	keypad_write(kp, mask, ~((((1 << kp->data.rows)-1) << 9) |
+			   (((1 << kp->data.cols)-1))));
+	keypad_write(kp, pol, 0x3ffff);
+	keypad_write(kp, dclock, kp->data.debounce);
+	keypad_write(kp, rclock, 4*kp->data.debounce);
+	keypad_write(kp, stable_cnt, kp->data.stable);
+
+	/* Enable Input */
+	keypad_write(kp, in_en, 0);
+	mdelay(1);
+	keypad_write(kp, in_en, 1);
+
+	ret = request_irq(kp->irq_press, keypad_irq_press, 0,
+			  "keypad-press", kp);
+	if (ret < 0) {
+		dev_err(dev, "Could not allocate keypad press key irq\n");
+		goto error4;
+	}
+
+	ret = request_irq(kp->irq_release, keypad_irq_release, 0,
+			  "keypad-release", kp);
+	if (ret < 0) {
+		dev_err(dev, "Could not allocate keypad release key irq\n");
+		goto error5;
+	}
+
+	set_bit(EV_KEY, kp->input_dev->evbit);
+	for (i = 0; i < kp->data.keymap_size; i++)
+		set_bit(kp->data.keymap[i] & KEY_MAX, kp->input_dev->keybit);
+
+	kp->input_dev->name = "tnetv107x-keypad";
+	kp->input_dev->phys = "tnetv107x-keypad/input0";
+	kp->input_dev->dev.parent = &pdev->dev;
+	kp->input_dev->id.bustype = BUS_HOST;
+	kp->input_dev->id.vendor = 0x0001;
+
+	rev = keypad_read(kp, rev);
+	kp->input_dev->id.product = ((rev >>  8) & 0x07);
+	kp->input_dev->id.version = ((rev >> 16) & 0xfff);
+
+	kp->input_dev->keycode = kp->data.keymap;
+	kp->input_dev->keycodesize = sizeof(int);
+	kp->input_dev->keycodemax = kp->data.keymap_size;
+	ret = input_register_device(kp->input_dev);
+	if (ret < 0) {
+		dev_err(dev, "Could not register input device\n");
+		goto error6;
+	}
+
+	dev_info(dev, "registered keypad device\n");
+	return 0;
+
+error6:
+	free_irq(kp->irq_release, kp);
+error5:
+	free_irq(kp->irq_press, kp);
+error4:
+	clk_disable(kp->clk);
+	clk_put(kp->clk);
+error3:
+	iounmap(kp->regs);
+error2:
+	release_mem_region(kp->res->start, resource_size(kp->res));
+error1:
+	input_free_device(kp->input_dev);
+error0:
+	platform_set_drvdata(pdev, NULL);
+	kfree(kp);
+	return ret;
+}
+
+static int tnetv107x_keypad_remove(struct platform_device *pdev)
+{
+	struct keypad_data *kp = dev_get_drvdata(&pdev->dev);
+
+	if (kp) {
+		input_unregister_device(kp->input_dev);
+		free_irq(kp->irq_release, kp);
+		free_irq(kp->irq_press, kp);
+		clk_disable(kp->clk);
+		clk_put(kp->clk);
+		iounmap(kp->regs);
+		release_mem_region(kp->res->start, resource_size(kp->res));
+		input_free_device(kp->input_dev);
+		platform_set_drvdata(pdev, NULL);
+		kfree(kp);
+	}
+	return 0;
+}
+
+static int tnetv107x_keypad_suspend(struct platform_device *pdev,
+		pm_message_t state)
+{
+	/* Nothing yet */
+	return 0;
+}
+
+static int tnetv107x_keypad_resume(struct platform_device *pdev)
+{
+	/* Nothing yet */
+	return 0;
+}
+
+static struct platform_driver tnetv107x_keypad_driver = {
+	.probe		= tnetv107x_keypad_probe,
+	.remove		= tnetv107x_keypad_remove,
+	.suspend	= tnetv107x_keypad_suspend,
+	.resume		= tnetv107x_keypad_resume,
+	.driver.name	= "tnetv107x-keypad",
+};
+
+static int __init tnetv107x_keypad_init(void)
+{
+	return platform_driver_register(&tnetv107x_keypad_driver);
+}
+
+static void __exit tnetv107x_keypad_exit(void)
+{
+	platform_driver_unregister(&tnetv107x_keypad_driver);
+}
+
+module_init(tnetv107x_keypad_init);
+module_exit(tnetv107x_keypad_exit);
+
+MODULE_AUTHOR("Cyril Chemparathy");
+MODULE_DESCRIPTION("TNETV107X Keypad Driver");
+MODULE_LICENSE("GPL");
-- 
1.7.0.4


  parent reply	other threads:[~2010-09-13 16:29 UTC|newest]

Thread overview: 15+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2010-09-13 16:29 [PATCH 0/7] add tnetv107x input drivers Cyril Chemparathy
2010-09-13 16:29 ` [PATCH 1/7] davinci: define tnetv107x keypad platform data Cyril Chemparathy
2010-09-14  1:26   ` Dmitry Torokhov
2010-09-13 16:29 ` Cyril Chemparathy [this message]
2010-09-14  1:26   ` [PATCH 2/7] input: add driver for tnetv107x on-chip keypad controller Dmitry Torokhov
2010-09-13 16:29 ` [PATCH 3/7] davinci: add tnetv107x keypad platform device Cyril Chemparathy
2010-09-13 16:29 ` [PATCH 4/7] davinci: add keypad config for tnetv107x evm board Cyril Chemparathy
2010-09-13 16:29 ` [PATCH 5/7] input: add driver for tnetv107x touchscreen controller Cyril Chemparathy
2010-09-14  1:27   ` Dmitry Torokhov
2010-09-14  6:38   ` Datta, Shubhrajyoti
2010-09-13 16:29 ` [PATCH 6/7] davinci: add tnetv107x touchscreen platform device Cyril Chemparathy
2010-09-13 16:29 ` [PATCH 7/7] davinci: add touchscreen config for tnetv107x evm board Cyril Chemparathy
2010-09-16 17:53 ` [PATCH 0/7] add tnetv107x input drivers Kevin Hilman
2010-09-16 18:11   ` Dmitry Torokhov
2010-09-16 18:29     ` Kevin Hilman

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1284395388-32687-3-git-send-email-cyril@ti.com \
    --to=cyril@ti.com \
    --cc=davinci-linux-open-source@linux.davincidsp.com \
    --cc=linux-input@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.