All of lore.kernel.org
 help / color / mirror / Atom feed
From: Mike Frysinger <vapier@gentoo.org>
To: linux-iio@vger.kernel.org, Jonathan Cameron <jic23@cam.ac.uk>
Cc: device-drivers-devel@blackfin.uclinux.org,
	Sonic Zhang <sonic.zhang@analog.com>
Subject: [PATCH 03/14] staging: iio: adc: new driver for AD7298 devices
Date: Sat, 23 Oct 2010 16:29:06 -0400	[thread overview]
Message-ID: <1287865757-1031-3-git-send-email-vapier@gentoo.org> (raw)
In-Reply-To: <1287865757-1031-1-git-send-email-vapier@gentoo.org>

From: Sonic Zhang <sonic.zhang@analog.com>

Signed-off-by: Sonic Zhang <sonic.zhang@analog.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
---
 drivers/staging/iio/adc/Kconfig  |    7 +
 drivers/staging/iio/adc/Makefile |    1 +
 drivers/staging/iio/adc/ad7298.c |  501 ++++++++++++++++++++++++++++++++++++++
 3 files changed, 509 insertions(+), 0 deletions(-)
 create mode 100644 drivers/staging/iio/adc/ad7298.c

diff --git a/drivers/staging/iio/adc/Kconfig b/drivers/staging/iio/adc/Kconfig
index a4c41dc..847f5f2 100644
--- a/drivers/staging/iio/adc/Kconfig
+++ b/drivers/staging/iio/adc/Kconfig
@@ -47,3 +47,10 @@ config AD7291
 	help
 	  Say yes here to build support for Analog Devices AD7291
 	  temperature sensors.
+
+config AD7298
+	tristate "Analog Devices AD7298 temperature sensor and ADC driver"
+	depends on SPI
+	help
+	  Say yes here to build support for Analog Devices AD7298
+	  temperature sensors and ADC.
diff --git a/drivers/staging/iio/adc/Makefile b/drivers/staging/iio/adc/Makefile
index 7d8ac9a..d0ea747 100644
--- a/drivers/staging/iio/adc/Makefile
+++ b/drivers/staging/iio/adc/Makefile
@@ -9,3 +9,4 @@ obj-$(CONFIG_MAX1363) += max1363.o
 obj-$(CONFIG_AD7150) += ad7150.o
 obj-$(CONFIG_AD7152) += ad7152.o
 obj-$(CONFIG_AD7291) += ad7291.o
+obj-$(CONFIG_AD7298) += ad7298.o
diff --git a/drivers/staging/iio/adc/ad7298.c b/drivers/staging/iio/adc/ad7298.c
new file mode 100644
index 0000000..1a080c9
--- /dev/null
+++ b/drivers/staging/iio/adc/ad7298.c
@@ -0,0 +1,501 @@
+/*
+ * AD7298 digital temperature sensor driver supporting AD7298
+ *
+ * Copyright 2010 Analog Devices Inc.
+ *
+ * Licensed under the GPL-2 or later.
+ */
+
+#include <linux/interrupt.h>
+#include <linux/gpio.h>
+#include <linux/workqueue.h>
+#include <linux/device.h>
+#include <linux/kernel.h>
+#include <linux/slab.h>
+#include <linux/sysfs.h>
+#include <linux/list.h>
+#include <linux/spi/spi.h>
+#include <linux/rtc.h>
+
+#include "../iio.h"
+#include "../sysfs.h"
+
+/*
+ * AD7298 command
+ */
+#define AD7298_PD			0x1
+#define AD7298_T_AVG_MASK		0x2
+#define AD7298_EXT_REF			0x4
+#define AD7298_T_SENSE_MASK		0x20
+#define AD7298_VOLTAGE_MASK		0x3fc0
+#define AD7298_VOLTAGE_OFFSET		0x6
+#define AD7298_VOLTAGE_LIMIT_COUNT	8
+#define AD7298_REPEAT			0x40
+#define AD7298_WRITE			0x80
+
+/*
+ * AD7298 value masks
+ */
+#define AD7298_CHANNEL_MASK		0xf000
+#define AD7298_VALUE_MASK		0xfff
+#define AD7298_T_VALUE_SIGN		0x400
+#define AD7298_T_VALUE_FLOAT_OFFSET	2
+#define AD7298_T_VALUE_FLOAT_MASK	0x2
+
+/*
+ * struct ad7298_chip_info - chip specifc information
+ */
+
+struct ad7298_chip_info {
+	const char *name;
+	struct spi_device *spi_dev;
+	struct iio_dev *indio_dev;
+	u16 command;
+	u16 busy_pin;
+	u8  channels;	/* Active voltage channels */
+};
+
+/*
+ * ad7298 register access by SPI
+ */
+static int ad7298_spi_write(struct ad7298_chip_info *chip, u16 data)
+{
+	struct spi_device *spi_dev = chip->spi_dev;
+	int ret = 0;
+
+	data |= AD7298_WRITE;
+	data = cpu_to_be16(data);
+	ret = spi_write(spi_dev, (u8 *)&data, sizeof(data));
+	if (ret < 0)
+		dev_err(&spi_dev->dev, "SPI write error\n");
+
+	return ret;
+}
+
+static int ad7298_spi_read(struct ad7298_chip_info *chip, u16 mask, u16 *data)
+{
+	struct spi_device *spi_dev = chip->spi_dev;
+	int ret = 0;
+	u8 count = chip->channels;
+	u16 command;
+	int i;
+
+	if (mask & AD7298_T_SENSE_MASK) {
+		command = chip->command & ~(AD7298_T_AVG_MASK | AD7298_VOLTAGE_MASK);
+		command |= AD7298_T_SENSE_MASK;
+		count = 1;
+	} else if (mask & AD7298_T_AVG_MASK) {
+		command = chip->command & ~AD7298_VOLTAGE_MASK;
+		command |= AD7298_T_SENSE_MASK | AD7298_T_AVG_MASK;
+		count = 2;
+	} else if (mask & AD7298_VOLTAGE_MASK) {
+		command = chip->command & ~(AD7298_T_AVG_MASK | AD7298_T_SENSE_MASK);
+		count = chip->channels;
+	}
+
+	ret = ad7298_spi_write(chip, chip->command);
+	if (ret < 0) {
+		dev_err(&spi_dev->dev, "SPI write command error\n");
+		return ret;
+	}
+
+	ret = spi_read(spi_dev, (u8 *)&command, sizeof(command));
+	if (ret < 0) {
+		dev_err(&spi_dev->dev, "SPI read error\n");
+		return ret;
+	}
+
+	i = 10000;
+	while (i && gpio_get_value(chip->busy_pin)) {
+		cpu_relax();
+		i--;
+	}
+	if (!i) {
+		dev_err(&spi_dev->dev, "Always in busy convertion.\n");
+		return -EBUSY;
+	}
+
+	for (i = 0; i < count; i++) {
+		ret = spi_read(spi_dev, (u8 *)&data[i], sizeof(data[i]));
+		if (ret < 0) {
+			dev_err(&spi_dev->dev, "SPI read error\n");
+			return ret;
+		}
+		*data = be16_to_cpu(data[i]);
+	}
+
+	return 0;
+}
+
+static ssize_t ad7298_show_mode(struct device *dev,
+		struct device_attribute *attr,
+		char *buf)
+{
+	struct iio_dev *dev_info = dev_get_drvdata(dev);
+	struct ad7298_chip_info *chip = dev_info->dev_data;
+
+	if (chip->command & AD7298_REPEAT)
+		return sprintf(buf, "repeat\n");
+	else
+		return sprintf(buf, "normal\n");
+}
+
+static ssize_t ad7298_store_mode(struct device *dev,
+		struct device_attribute *attr,
+		const char *buf,
+		size_t len)
+{
+	struct iio_dev *dev_info = dev_get_drvdata(dev);
+	struct ad7298_chip_info *chip = dev_info->dev_data;
+
+	if (strcmp(buf, "repeat"))
+		chip->command |= AD7298_REPEAT;
+	else
+		chip->command &= (~AD7298_REPEAT);
+
+	return 1;
+}
+
+static IIO_DEVICE_ATTR(mode, S_IRUGO | S_IWUSR,
+		ad7298_show_mode,
+		ad7298_store_mode,
+		0);
+
+static ssize_t ad7298_show_available_modes(struct device *dev,
+		struct device_attribute *attr,
+		char *buf)
+{
+	return sprintf(buf, "normal\nrepeat\n");
+}
+
+static IIO_DEVICE_ATTR(available_modes, S_IRUGO, ad7298_show_available_modes, NULL, 0);
+
+static ssize_t ad7298_store_reset(struct device *dev,
+		struct device_attribute *attr,
+		const char *buf,
+		size_t len)
+{
+	struct iio_dev *dev_info = dev_get_drvdata(dev);
+	struct ad7298_chip_info *chip = dev_info->dev_data;
+	u16 command;
+	int ret;
+
+	command = chip->command & ~AD7298_PD;
+
+	ret = ad7298_spi_write(chip, command);
+	if (ret)
+		return -EIO;
+
+	command = chip->command | AD7298_PD;
+
+	ret = ad7298_spi_write(chip, command);
+	if (ret)
+		return -EIO;
+
+	return len;
+}
+
+static IIO_DEVICE_ATTR(reset, S_IWUSR,
+		NULL,
+		ad7298_store_reset,
+		0);
+
+static ssize_t ad7298_show_ext_ref(struct device *dev,
+		struct device_attribute *attr,
+		char *buf)
+{
+	struct iio_dev *dev_info = dev_get_drvdata(dev);
+	struct ad7298_chip_info *chip = dev_info->dev_data;
+
+	return sprintf(buf, "%d\n", !!(chip->command & AD7298_EXT_REF));
+}
+
+static ssize_t ad7298_store_ext_ref(struct device *dev,
+		struct device_attribute *attr,
+		const char *buf,
+		size_t len)
+{
+	struct iio_dev *dev_info = dev_get_drvdata(dev);
+	struct ad7298_chip_info *chip = dev_info->dev_data;
+	u16 command;
+	int ret;
+
+	command = chip->command & (~AD7298_EXT_REF);
+	if (strcmp(buf, "1"))
+		command |= AD7298_EXT_REF;
+
+	ret = ad7298_spi_write(chip, command);
+	if (ret)
+		return -EIO;
+
+	chip->command = command;
+
+	return len;
+}
+
+static IIO_DEVICE_ATTR(ext_ref, S_IRUGO | S_IWUSR,
+		ad7298_show_ext_ref,
+		ad7298_store_ext_ref,
+		0);
+
+static ssize_t ad7298_show_t_sense(struct device *dev,
+		struct device_attribute *attr,
+		char *buf)
+{
+	struct iio_dev *dev_info = dev_get_drvdata(dev);
+	struct ad7298_chip_info *chip = dev_info->dev_data;
+	u16 data;
+	char sign = ' ';
+	int ret;
+
+	ret = ad7298_spi_read(chip, AD7298_T_SENSE_MASK, &data);
+	if (ret)
+		return -EIO;
+
+	if (data & AD7298_T_VALUE_SIGN) {
+		/* convert supplement to positive value */
+		data = (AD7298_T_VALUE_SIGN << 1) - data;
+		sign = '-';
+	}
+
+	return sprintf(buf, "%c%d.%.2d\n", sign,
+		(data >> AD7298_T_VALUE_FLOAT_OFFSET),
+		(data & AD7298_T_VALUE_FLOAT_MASK) * 25);
+}
+
+static IIO_DEVICE_ATTR(t_sense, S_IRUGO, ad7298_show_t_sense, NULL, 0);
+
+static ssize_t ad7298_show_t_average(struct device *dev,
+		struct device_attribute *attr,
+		char *buf)
+{
+	struct iio_dev *dev_info = dev_get_drvdata(dev);
+	struct ad7298_chip_info *chip = dev_info->dev_data;
+	u16 data[2];
+	char sign = ' ';
+	int ret;
+
+	ret = ad7298_spi_read(chip, AD7298_T_AVG_MASK, data);
+	if (ret)
+		return -EIO;
+
+	if (data[1] & AD7298_T_VALUE_SIGN) {
+		/* convert supplement to positive value */
+		data[1] = (AD7298_T_VALUE_SIGN << 1) - data[1];
+		sign = '-';
+	}
+
+	return sprintf(buf, "%c%d.%.2d\n", sign,
+		(data[1] >> AD7298_T_VALUE_FLOAT_OFFSET),
+		(data[1] & AD7298_T_VALUE_FLOAT_MASK) * 25);
+}
+
+static IIO_DEVICE_ATTR(t_average, S_IRUGO, ad7298_show_t_average, NULL, 0);
+
+static ssize_t ad7298_show_voltage(struct device *dev,
+		struct device_attribute *attr,
+		char *buf)
+{
+	struct iio_dev *dev_info = dev_get_drvdata(dev);
+	struct ad7298_chip_info *chip = dev_info->dev_data;
+	u16 data[AD7298_VOLTAGE_LIMIT_COUNT];
+	int i, size, ret;
+
+	ret = ad7298_spi_read(chip, AD7298_VOLTAGE_MASK, data);
+	if (ret)
+		return -EIO;
+
+	for (i = 0; i < AD7298_VOLTAGE_LIMIT_COUNT; i++) {
+		if (chip->command & (AD7298_T_SENSE_MASK << i)) {
+			ret = sprintf(buf, "channel[%d]=%d\n", i,
+					data[i] & AD7298_VALUE_MASK);
+			if (ret < 0)
+				break;
+			buf += ret;
+			size += ret;
+		}
+	}
+
+	return size;
+}
+
+static IIO_DEVICE_ATTR(voltage, S_IRUGO, ad7298_show_voltage, NULL, 0);
+
+static ssize_t ad7298_show_channel_mask(struct device *dev,
+		struct device_attribute *attr,
+		char *buf)
+{
+	struct iio_dev *dev_info = dev_get_drvdata(dev);
+	struct ad7298_chip_info *chip = dev_info->dev_data;
+
+	return sprintf(buf, "0x%x\n", (chip->command & AD7298_VOLTAGE_MASK) >>
+			AD7298_VOLTAGE_OFFSET);
+}
+
+static ssize_t ad7298_store_channel_mask(struct device *dev,
+		struct device_attribute *attr,
+		const char *buf,
+		size_t len)
+{
+	struct iio_dev *dev_info = dev_get_drvdata(dev);
+	struct ad7298_chip_info *chip = dev_info->dev_data;
+	unsigned long data;
+	int i, ret;
+
+	ret = strict_strtoul(buf, 16, &data);
+	if (ret || data > 0xff)
+		return -EINVAL;
+
+	chip->command &= (~AD7298_VOLTAGE_MASK);
+	chip->command |= data << AD7298_VOLTAGE_OFFSET;
+
+	for (i = 0, chip->channels = 0; i < AD7298_VOLTAGE_LIMIT_COUNT; i++) {
+		if (chip->command & (AD7298_T_SENSE_MASK << i))
+			chip->channels++;
+	}
+
+	return ret;
+}
+
+static IIO_DEVICE_ATTR(channel_mask, S_IRUGO | S_IWUSR,
+		ad7298_show_channel_mask,
+		ad7298_store_channel_mask,
+		0);
+
+static ssize_t ad7298_show_name(struct device *dev,
+		struct device_attribute *attr,
+		char *buf)
+{
+	struct iio_dev *dev_info = dev_get_drvdata(dev);
+	struct ad7298_chip_info *chip = dev_info->dev_data;
+	return sprintf(buf, "%s\n", chip->name);
+}
+
+static IIO_DEVICE_ATTR(name, S_IRUGO, ad7298_show_name, NULL, 0);
+
+static struct attribute *ad7298_attributes[] = {
+	&iio_dev_attr_available_modes.dev_attr.attr,
+	&iio_dev_attr_mode.dev_attr.attr,
+	&iio_dev_attr_reset.dev_attr.attr,
+	&iio_dev_attr_ext_ref.dev_attr.attr,
+	&iio_dev_attr_t_sense.dev_attr.attr,
+	&iio_dev_attr_t_average.dev_attr.attr,
+	&iio_dev_attr_voltage.dev_attr.attr,
+	&iio_dev_attr_channel_mask.dev_attr.attr,
+	&iio_dev_attr_name.dev_attr.attr,
+	NULL,
+};
+
+static const struct attribute_group ad7298_attribute_group = {
+	.attrs = ad7298_attributes,
+};
+
+/*
+ * device probe and remove
+ */
+static int __devinit ad7298_probe(struct spi_device *spi_dev)
+{
+	struct ad7298_chip_info *chip;
+	unsigned short *pins = spi_dev->dev.platform_data;
+	int ret = 0;
+
+	chip = kzalloc(sizeof(struct ad7298_chip_info), GFP_KERNEL);
+
+	if (chip == NULL)
+		return -ENOMEM;
+
+	/* this is only used for device removal purposes */
+	dev_set_drvdata(&spi_dev->dev, chip);
+
+	chip->spi_dev = spi_dev;
+	chip->name = spi_dev->modalias;
+	chip->busy_pin = pins[0];
+
+	ret = gpio_request(chip->busy_pin, chip->name);
+	if (ret) {
+		dev_err(&spi_dev->dev, "Fail to request busy gpio PIN %d.\n",
+			chip->busy_pin);
+		goto error_free_chip;
+	}
+	gpio_direction_input(chip->busy_pin);
+
+	chip->indio_dev = iio_allocate_device();
+	if (chip->indio_dev == NULL) {
+		ret = -ENOMEM;
+		goto error_free_gpio;
+	}
+
+	chip->indio_dev->dev.parent = &spi_dev->dev;
+	chip->indio_dev->attrs = &ad7298_attribute_group;
+	chip->indio_dev->dev_data = (void *)chip;
+	chip->indio_dev->driver_module = THIS_MODULE;
+	chip->indio_dev->modes = INDIO_DIRECT_MODE;
+
+	ret = iio_device_register(chip->indio_dev);
+	if (ret)
+		goto error_free_dev;
+
+	dev_info(&spi_dev->dev, "%s temperature sensor and ADC registered.\n",
+			 chip->name);
+
+	return 0;
+
+error_free_dev:
+	iio_free_device(chip->indio_dev);
+error_free_gpio:
+	gpio_free(chip->busy_pin);
+error_free_chip:
+	kfree(chip);
+
+	return ret;
+}
+
+static int __devexit ad7298_remove(struct spi_device *spi_dev)
+{
+	struct ad7298_chip_info *chip = dev_get_drvdata(&spi_dev->dev);
+	struct iio_dev *indio_dev = chip->indio_dev;
+
+	dev_set_drvdata(&spi_dev->dev, NULL);
+	iio_device_unregister(indio_dev);
+	iio_free_device(chip->indio_dev);
+	gpio_free(chip->busy_pin);
+	kfree(chip);
+
+	return 0;
+}
+
+static const struct spi_device_id ad7298_id[] = {
+	{ "ad7298", 0 },
+	{}
+};
+
+MODULE_DEVICE_TABLE(spi, ad7298_id);
+
+static struct spi_driver ad7298_driver = {
+	.driver = {
+		.name = "ad7298",
+		.bus = &spi_bus_type,
+		.owner = THIS_MODULE,
+	},
+	.probe = ad7298_probe,
+	.remove = __devexit_p(ad7298_remove),
+	.id_table = ad7298_id,
+};
+
+static __init int ad7298_init(void)
+{
+	return spi_register_driver(&ad7298_driver);
+}
+
+static __exit void ad7298_exit(void)
+{
+	spi_unregister_driver(&ad7298_driver);
+}
+
+MODULE_AUTHOR("Sonic Zhang <sonic.zhang@analog.com>");
+MODULE_DESCRIPTION("Analog Devices AD7298 digital"
+			" temperature sensor and ADC driver");
+MODULE_LICENSE("GPL v2");
+
+module_init(ad7298_init);
+module_exit(ad7298_exit);
-- 
1.7.3.2

  parent reply	other threads:[~2010-10-23 20:29 UTC|newest]

Thread overview: 48+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2010-10-23 20:29 [PATCH 01/14] staging: iio: adc: new driver for AD7152/3 devices Mike Frysinger
2010-10-23 20:29 ` [PATCH 02/14] staging: iio: adc: new driver for AD7291 devices Mike Frysinger
2010-10-24 21:32   ` Jonathan Cameron
2010-10-23 20:29 ` Mike Frysinger [this message]
2010-10-24 21:49   ` [PATCH 03/14] staging: iio: adc: new driver for AD7298 devices Jonathan Cameron
2010-10-23 20:29 ` [PATCH 04/14] staging: iio: adc: new driver for AD7314 devices Mike Frysinger
2010-10-24 21:56   ` Jonathan Cameron
2010-10-26  3:35     ` Zhang, Sonic
2010-10-23 20:29 ` [PATCH 05/14] staging: iio: adc: new driver for AD7414/5 devices Mike Frysinger
2010-10-24 22:03   ` Jonathan Cameron
2010-10-23 20:29 ` [PATCH 06/14] staging: iio: adc: new driver for AD7416/7/8 devices Mike Frysinger
2010-10-24 22:19   ` Jonathan Cameron
2010-10-23 20:29 ` [PATCH 07/14] staging: iio: adc: new driver for AD7475/6/6A/7/7A/8/8A and AD7495 devices Mike Frysinger
2010-10-24 21:14   ` [Device-drivers-devel] " Mike Frysinger
2010-10-24 22:21   ` Jonathan Cameron
2010-10-23 20:29 ` [PATCH 08/14] staging: iio: adc: new driver for AD7745/6/7 devices Mike Frysinger
2010-10-24 22:36   ` Jonathan Cameron
2010-10-23 20:29 ` [PATCH 09/14] staging: iio: adc: new driver for AD7816 devices Mike Frysinger
2010-10-23 20:29 ` [PATCH 10/14] staging: iio: adc: new driver for ADT75 temperature sensors Mike Frysinger
2010-10-23 20:29 ` [PATCH 11/14] staging: iio: adc: new driver for ADT7310 " Mike Frysinger
2010-10-23 20:29 ` [PATCH 12/14] staging: iio: adc: new driver for ADT7408 " Mike Frysinger
2010-10-24 22:53   ` Jonathan Cameron
2010-10-24 23:47     ` Guenter Roeck
2010-10-25 10:28       ` Jonathan Cameron
2010-10-26  4:20       ` Zhang, Sonic
2010-10-26  5:08         ` Guenter Roeck
2010-10-26  5:38           ` Zhang, Sonic
2010-10-26  9:14         ` Jonathan Cameron
2010-10-25  0:46     ` Guenter Roeck
2010-10-25 10:32       ` Jonathan Cameron
2010-10-25 11:19         ` Guenter Roeck
2010-10-25 11:43           ` Jonathan Cameron
2010-10-25 14:12             ` Guenter Roeck
2010-10-25 16:18               ` Hennerich, Michael
2010-10-25 11:47           ` [Device-drivers-devel] " Hennerich, Michael
2010-10-26  3:21             ` Zhang, Sonic
2010-10-26  3:27     ` Zhang, Sonic
2010-10-26  3:52       ` Guenter Roeck
2010-10-26  9:15       ` Jonathan Cameron
2010-10-26 14:33         ` Guenter Roeck
2010-11-01 10:56           ` Jonathan Cameron
2010-11-01 14:37             ` Guenter Roeck
2010-11-01 15:19               ` Jonathan Cameron
2010-10-23 20:29 ` [PATCH 13/14] staging: iio: adc: new driver for ADT7410 " Mike Frysinger
2010-10-23 20:29 ` [PATCH 14/14] staging: iio: adc: new ad799x driver Mike Frysinger
2010-10-24 21:14   ` [Device-drivers-devel] " Mike Frysinger
2010-10-24 22:55   ` Jonathan Cameron
2010-10-24 21:09 ` [PATCH 01/14] staging: iio: adc: new driver for AD7152/3 devices Jonathan Cameron

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1287865757-1031-3-git-send-email-vapier@gentoo.org \
    --to=vapier@gentoo.org \
    --cc=device-drivers-devel@blackfin.uclinux.org \
    --cc=jic23@cam.ac.uk \
    --cc=linux-iio@vger.kernel.org \
    --cc=sonic.zhang@analog.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.