From: "Henrik Rydberg" <rydberg@euromail.se>
To: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Cc: Jiri Kosina <jkosina@suse.cz>,
linux-input@vger.kernel.org, linux-kernel@vger.kernel.org,
"Edgar (gimli) Hucek" <gimli@dark-green.com>,
stable@kernel.org, Henrik Rydberg <rydberg@euromail.se>
Subject: [PATCH] input: bcm5974: Add support for MacBookAir3
Date: Tue, 9 Nov 2010 17:38:42 +0100 [thread overview]
Message-ID: <1289320722-1948-1-git-send-email-rydberg@euromail.se> (raw)
From: Edgar (gimli) Hucek <gimli@dark-green.com>
This patch adds support for the MacBookAir3,1 and MacBookAir3,2
models.
[rydberg@euromail.se: touchpad range calibration]
Cc: stable@kernel.org
Signed-off-by: Edgar (gimli) Hucek <gimli@dark-green.com>
Signed-off-by: Henrik Rydberg <rydberg@euromail.se>
---
Hi Dmitry, Jiri,
This patch was seen on lkml last week, and has now been excercised by
a larger set of users. As usual, this patch should go before or
together with the HID changes, so as not to break basic support from
the non-MT HID driver.
Cheers,
Henrik
drivers/input/mouse/bcm5974.c | 40 ++++++++++++++++++++++++++++++++++++++++
1 files changed, 40 insertions(+), 0 deletions(-)
diff --git a/drivers/input/mouse/bcm5974.c b/drivers/input/mouse/bcm5974.c
index b952317..ee82851 100644
--- a/drivers/input/mouse/bcm5974.c
+++ b/drivers/input/mouse/bcm5974.c
@@ -55,6 +55,14 @@
#define USB_DEVICE_ID_APPLE_WELLSPRING3_ANSI 0x0236
#define USB_DEVICE_ID_APPLE_WELLSPRING3_ISO 0x0237
#define USB_DEVICE_ID_APPLE_WELLSPRING3_JIS 0x0238
+/* MacbookAir3,2 (unibody), aka wellspring5 */
+#define USB_DEVICE_ID_APPLE_WELLSPRING4_ANSI 0x023f
+#define USB_DEVICE_ID_APPLE_WELLSPRING4_ISO 0x0240
+#define USB_DEVICE_ID_APPLE_WELLSPRING4_JIS 0x0241
+/* MacbookAir3,1 (unibody), aka wellspring4 */
+#define USB_DEVICE_ID_APPLE_WELLSPRING4A_ANSI 0x0242
+#define USB_DEVICE_ID_APPLE_WELLSPRING4A_ISO 0x0243
+#define USB_DEVICE_ID_APPLE_WELLSPRING4A_JIS 0x0244
#define BCM5974_DEVICE(prod) { \
.match_flags = (USB_DEVICE_ID_MATCH_DEVICE | \
@@ -80,6 +88,14 @@ static const struct usb_device_id bcm5974_table[] = {
BCM5974_DEVICE(USB_DEVICE_ID_APPLE_WELLSPRING3_ANSI),
BCM5974_DEVICE(USB_DEVICE_ID_APPLE_WELLSPRING3_ISO),
BCM5974_DEVICE(USB_DEVICE_ID_APPLE_WELLSPRING3_JIS),
+ /* MacbookAir3,2 */
+ BCM5974_DEVICE(USB_DEVICE_ID_APPLE_WELLSPRING4_ANSI),
+ BCM5974_DEVICE(USB_DEVICE_ID_APPLE_WELLSPRING4_ISO),
+ BCM5974_DEVICE(USB_DEVICE_ID_APPLE_WELLSPRING4_JIS),
+ /* MacbookAir3,1 */
+ BCM5974_DEVICE(USB_DEVICE_ID_APPLE_WELLSPRING4A_ANSI),
+ BCM5974_DEVICE(USB_DEVICE_ID_APPLE_WELLSPRING4A_ISO),
+ BCM5974_DEVICE(USB_DEVICE_ID_APPLE_WELLSPRING4A_JIS),
/* Terminating entry */
{}
};
@@ -234,6 +250,30 @@ static const struct bcm5974_config bcm5974_config_table[] = {
{ DIM_X, DIM_X / SN_COORD, -4460, 5166 },
{ DIM_Y, DIM_Y / SN_COORD, -75, 6700 }
},
+ {
+ USB_DEVICE_ID_APPLE_WELLSPRING4_ANSI,
+ USB_DEVICE_ID_APPLE_WELLSPRING4_ISO,
+ USB_DEVICE_ID_APPLE_WELLSPRING4_JIS,
+ HAS_INTEGRATED_BUTTON,
+ 0x84, sizeof(struct bt_data),
+ 0x81, TYPE2, FINGER_TYPE2, FINGER_TYPE2 + SIZEOF_ALL_FINGERS,
+ { DIM_PRESSURE, DIM_PRESSURE / SN_PRESSURE, 0, 300 },
+ { DIM_WIDTH, DIM_WIDTH / SN_WIDTH, 0, 2048 },
+ { DIM_X, DIM_X / SN_COORD, -4620, 5140 },
+ { DIM_Y, DIM_Y / SN_COORD, -150, 6600 }
+ },
+ {
+ USB_DEVICE_ID_APPLE_WELLSPRING4A_ANSI,
+ USB_DEVICE_ID_APPLE_WELLSPRING4A_ISO,
+ USB_DEVICE_ID_APPLE_WELLSPRING4A_JIS,
+ HAS_INTEGRATED_BUTTON,
+ 0x84, sizeof(struct bt_data),
+ 0x81, TYPE2, FINGER_TYPE2, FINGER_TYPE2 + SIZEOF_ALL_FINGERS,
+ { DIM_PRESSURE, DIM_PRESSURE / SN_PRESSURE, 0, 300 },
+ { DIM_WIDTH, DIM_WIDTH / SN_WIDTH, 0, 2048 },
+ { DIM_X, DIM_X / SN_COORD, -4616, 5112 },
+ { DIM_Y, DIM_Y / SN_COORD, -142, 5234 }
+ },
{}
};
--
1.7.1
next reply other threads:[~2010-11-09 16:39 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2010-11-09 16:38 Henrik Rydberg [this message]
2010-11-11 8:39 ` [PATCH] input: bcm5974: Add support for MacBookAir3 Dmitry Torokhov
2010-11-15 13:18 ` Jiri Kosina
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1289320722-1948-1-git-send-email-rydberg@euromail.se \
--to=rydberg@euromail.se \
--cc=dmitry.torokhov@gmail.com \
--cc=gimli@dark-green.com \
--cc=jkosina@suse.cz \
--cc=linux-input@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=stable@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.