From mboxrd@z Thu Jan 1 00:00:00 1970 From: Cyril Chemparathy Subject: [PATCH v5 06/12] regulator: add driver for tps6524x regulator Date: Mon, 15 Nov 2010 14:12:08 -0500 Message-ID: <1289848334-8695-7-git-send-email-cyril@ti.com> References: <1289848334-8695-1-git-send-email-cyril@ti.com> Mime-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit Cc: dbrownell-Rn4VEauK+AKRv+LV9MX5uipxlwaOVQ5f@public.gmane.org, khilman-1D3HCaltpLuhEniVeURVKkEOCMrvLtNR@public.gmane.org, Cyril Chemparathy , akpm-de/tnXTf+JLsfHDXvbKv3WD2FQJk+8+b@public.gmane.org, alan-qBU/x9rampVanCEyBjwyrvXRex20P6io@public.gmane.org To: davinci-linux-open-source-VycZQUHpC/PFrsHnngEfi1aTQe2KTcn/@public.gmane.org, spi-devel-general-5NWGOfrQmneRv+LV9MX5uipxlwaOVQ5f@public.gmane.org, sameo-VuQAYsv1563Yd54FQh9/CA@public.gmane.org, lrg-kDsPt+C1G03kYMGBc/C6ZA@public.gmane.org, broonie-yzvPICuk2AATkU/dhu1WVueM+bqZidxxQQ4Iyu8u01E@public.gmane.org, rpurdie@rpsys Return-path: In-Reply-To: <1289848334-8695-1-git-send-email-cyril-l0cyMroinI0@public.gmane.org> List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Errors-To: spi-devel-general-bounces-5NWGOfrQmneRv+LV9MX5uipxlwaOVQ5f@public.gmane.org List-Id: linux-spi.vger.kernel.org TPS6524X provides three step-down converters and two general-purpose LDO voltage regulators. This device is interfaced using SPI. Acked-by: Mark Brown Signed-off-by: Cyril Chemparathy --- drivers/regulator/Kconfig | 10 + drivers/regulator/Makefile | 1 + drivers/regulator/tps6524x-regulator.c | 692 ++++++++++++++++++++++++++++++++ 3 files changed, 703 insertions(+), 0 deletions(-) create mode 100644 drivers/regulator/tps6524x-regulator.c diff --git a/drivers/regulator/Kconfig b/drivers/regulator/Kconfig index 172951b..a6f8536 100644 --- a/drivers/regulator/Kconfig +++ b/drivers/regulator/Kconfig @@ -235,5 +235,15 @@ config REGULATOR_TPS6586X help This driver supports TPS6586X voltage regulator chips. +config REGULATOR_TPS6524X + tristate "TI TPS6524X Power regulators" + depends on SPI + help + This driver supports TPS6524X voltage regulator chips. TPS6524X + provides three step-down converters and two general-purpose LDO + voltage regulators. This device is interfaced using a customized + serial interface currently supported on the sequencer serial + port controller. + endif diff --git a/drivers/regulator/Makefile b/drivers/regulator/Makefile index 8285fd8..a8e5bc0 100644 --- a/drivers/regulator/Makefile +++ b/drivers/regulator/Makefile @@ -33,6 +33,7 @@ obj-$(CONFIG_REGULATOR_AB3100) += ab3100.o obj-$(CONFIG_REGULATOR_TPS65023) += tps65023-regulator.o obj-$(CONFIG_REGULATOR_TPS6507X) += tps6507x-regulator.o +obj-$(CONFIG_REGULATOR_TPS6524X) += tps6524x-regulator.o obj-$(CONFIG_REGULATOR_88PM8607) += 88pm8607.o obj-$(CONFIG_REGULATOR_ISL6271A) += isl6271a-regulator.o obj-$(CONFIG_REGULATOR_AB8500) += ab8500.o diff --git a/drivers/regulator/tps6524x-regulator.c b/drivers/regulator/tps6524x-regulator.c new file mode 100644 index 0000000..6d6cc5e --- /dev/null +++ b/drivers/regulator/tps6524x-regulator.c @@ -0,0 +1,692 @@ +/* + * Regulator driver for TPS6524x PMIC + * + * Copyright (C) 2010 Texas Instruments + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation version 2. + * + * This program is distributed "as is" WITHOUT ANY WARRANTY of any kind, + * whether express or implied; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + */ + +#include +#include +#include +#include +#include +#include +#include +#include + +#define REG_LDO_SET 0x0 +#define LDO_ILIM_MASK 1 /* 0 = 400-800, 1 = 900-1500 */ +#define LDO_VSEL_MASK 0x0f +#define LDO2_ILIM_SHIFT 12 +#define LDO2_VSEL_SHIFT 4 +#define LDO1_ILIM_SHIFT 8 +#define LDO1_VSEL_SHIFT 0 + +#define REG_BLOCK_EN 0x1 +#define BLOCK_MASK 1 +#define BLOCK_LDO1_SHIFT 0 +#define BLOCK_LDO2_SHIFT 1 +#define BLOCK_LCD_SHIFT 2 +#define BLOCK_USB_SHIFT 3 + +#define REG_DCDC_SET 0x2 +#define DCDC_VDCDC_MASK 0x1f +#define DCDC_VDCDC1_SHIFT 0 +#define DCDC_VDCDC2_SHIFT 5 +#define DCDC_VDCDC3_SHIFT 10 + +#define REG_DCDC_EN 0x3 +#define DCDCDCDC_EN_MASK 0x1 +#define DCDCDCDC1_EN_SHIFT 0 +#define DCDCDCDC1_PG_MSK BIT(1) +#define DCDCDCDC2_EN_SHIFT 2 +#define DCDCDCDC2_PG_MSK BIT(3) +#define DCDCDCDC3_EN_SHIFT 4 +#define DCDCDCDC3_PG_MSK BIT(5) + +#define REG_USB 0x4 +#define USB_ILIM_SHIFT 0 +#define USB_ILIM_MASK 0x3 +#define USB_TSD_SHIFT 2 +#define USB_TSD_MASK 0x3 +#define USB_TWARN_SHIFT 4 +#define USB_TWARN_MASK 0x3 +#define USB_IWARN_SD BIT(6) +#define USB_FAST_LOOP BIT(7) + +#define REG_ALARM 0x5 +#define ALARM_LDO1 BIT(0) +#define ALARM_DCDC1 BIT(1) +#define ALARM_DCDC2 BIT(2) +#define ALARM_DCDC3 BIT(3) +#define ALARM_LDO2 BIT(4) +#define ALARM_USB_WARN BIT(5) +#define ALARM_USB_ALARM BIT(6) +#define ALARM_LCD BIT(9) +#define ALARM_TEMP_WARM BIT(10) +#define ALARM_TEMP_HOT BIT(11) +#define ALARM_NRST BIT(14) +#define ALARM_POWERUP BIT(15) + +#define REG_INT_ENABLE 0x6 +#define INT_LDO1 BIT(0) +#define INT_DCDC1 BIT(1) +#define INT_DCDC2 BIT(2) +#define INT_DCDC3 BIT(3) +#define INT_LDO2 BIT(4) +#define INT_USB_WARN BIT(5) +#define INT_USB_ALARM BIT(6) +#define INT_LCD BIT(9) +#define INT_TEMP_WARM BIT(10) +#define INT_TEMP_HOT BIT(11) +#define INT_GLOBAL_EN BIT(15) + +#define REG_INT_STATUS 0x7 +#define STATUS_LDO1 BIT(0) +#define STATUS_DCDC1 BIT(1) +#define STATUS_DCDC2 BIT(2) +#define STATUS_DCDC3 BIT(3) +#define STATUS_LDO2 BIT(4) +#define STATUS_USB_WARN BIT(5) +#define STATUS_USB_ALARM BIT(6) +#define STATUS_LCD BIT(9) +#define STATUS_TEMP_WARM BIT(10) +#define STATUS_TEMP_HOT BIT(11) + +#define REG_SOFTWARE_RESET 0xb +#define REG_WRITE_ENABLE 0xd +#define REG_REV_ID 0xf + +#define N_DCDC 3 +#define N_LDO 2 +#define N_SWITCH 2 +#define N_REGULATORS (3 /* DCDC */ + \ + 2 /* LDO */ + \ + 2 /* switch */) + +#define FIXED_ILIMSEL BIT(0) +#define FIXED_VOLTAGE BIT(1) + +#define CMD_READ(reg) ((reg) << 6) +#define CMD_WRITE(reg) (BIT(5) | (reg) << 6) +#define STAT_CLK BIT(3) +#define STAT_WRITE BIT(2) +#define STAT_INVALID BIT(1) +#define STAT_WP BIT(0) + +struct field { + int reg; + int shift; + int mask; +}; + +struct supply_info { + const char *name; + int n_voltages; + const int *voltages; + int fixed_voltage; + int n_ilimsels; + const int *ilimsels; + int fixed_ilimsel; + int flags; + struct field enable, voltage, ilimsel; +}; + +struct tps6524x { + struct device *dev; + struct spi_device *spi; + struct mutex lock; + struct regulator_desc desc[N_REGULATORS]; + struct regulator_dev *rdev[N_REGULATORS]; +}; + +static int __read_reg(struct tps6524x *hw, int reg) +{ + int error = 0; + u16 cmd = CMD_READ(reg), in; + u8 status; + struct spi_message m; + struct spi_transfer t[3]; + + spi_message_init(&m); + memset(t, 0, sizeof(t)); + + t[0].tx_buf = &cmd; + t[0].len = 2; + t[0].bits_per_word = 12; + spi_message_add_tail(&t[0], &m); + + t[1].rx_buf = ∈ + t[1].len = 2; + t[1].bits_per_word = 16; + spi_message_add_tail(&t[1], &m); + + t[2].rx_buf = &status; + t[2].len = 1; + t[2].bits_per_word = 4; + spi_message_add_tail(&t[2], &m); + + error = spi_sync(hw->spi, &m); + if (error < 0) + return error; + + dev_dbg(hw->dev, "read reg %d, data %x, status %x\n", + reg, in, status); + + if (!(status & STAT_CLK) || (status & STAT_WRITE)) + return -EIO; + + if (status & STAT_INVALID) + return -EINVAL; + + return in; +} + +static int read_reg(struct tps6524x *hw, int reg) +{ + int ret; + + mutex_lock(&hw->lock); + ret = __read_reg(hw, reg); + mutex_unlock(&hw->lock); + + return ret; +} + +static int __write_reg(struct tps6524x *hw, int reg, int val) +{ + int error = 0; + u16 cmd = CMD_WRITE(reg), out = val; + u8 status; + struct spi_message m; + struct spi_transfer t[3]; + + spi_message_init(&m); + memset(t, 0, sizeof(t)); + + t[0].tx_buf = &cmd; + t[0].len = 2; + t[0].bits_per_word = 12; + spi_message_add_tail(&t[0], &m); + + t[1].tx_buf = &out; + t[1].len = 2; + t[1].bits_per_word = 16; + spi_message_add_tail(&t[1], &m); + + t[2].rx_buf = &status; + t[2].len = 1; + t[2].bits_per_word = 4; + spi_message_add_tail(&t[2], &m); + + error = spi_sync(hw->spi, &m); + if (error < 0) + return error; + + dev_dbg(hw->dev, "wrote reg %d, data %x, status %x\n", + reg, out, status); + + if (!(status & STAT_CLK) || !(status & STAT_WRITE)) + return -EIO; + + if (status & (STAT_INVALID | STAT_WP)) + return -EINVAL; + + return error; +} + +static int __rmw_reg(struct tps6524x *hw, int reg, int mask, int val) +{ + int ret; + + ret = __read_reg(hw, reg); + if (ret < 0) + return ret; + + ret &= ~mask; + ret |= val; + + ret = __write_reg(hw, reg, ret); + + return (ret < 0) ? ret : 0; +} + +static int rmw_protect(struct tps6524x *hw, int reg, int mask, int val) +{ + int ret; + + mutex_lock(&hw->lock); + + ret = __write_reg(hw, REG_WRITE_ENABLE, 1); + if (ret) { + dev_err(hw->dev, "failed to set write enable\n"); + goto error; + } + + ret = __rmw_reg(hw, reg, mask, val); + if (ret) + dev_err(hw->dev, "failed to rmw register %d\n", reg); + + ret = __write_reg(hw, REG_WRITE_ENABLE, 0); + if (ret) { + dev_err(hw->dev, "failed to clear write enable\n"); + goto error; + } + +error: + mutex_unlock(&hw->lock); + + return ret; +} + +static int read_field(struct tps6524x *hw, const struct field *field) +{ + int tmp; + + tmp = read_reg(hw, field->reg); + if (tmp < 0) + return tmp; + + return (tmp >> field->shift) & field->mask; +} + +static int write_field(struct tps6524x *hw, const struct field *field, + int val) +{ + if (val & ~field->mask) + return -EOVERFLOW; + + return rmw_protect(hw, field->reg, + field->mask << field->shift, + val << field->shift); +} + +static const int dcdc1_voltages[] = { + 800000, 825000, 850000, 875000, + 900000, 925000, 950000, 975000, + 1000000, 1025000, 1050000, 1075000, + 1100000, 1125000, 1150000, 1175000, + 1200000, 1225000, 1250000, 1275000, + 1300000, 1325000, 1350000, 1375000, + 1400000, 1425000, 1450000, 1475000, + 1500000, 1525000, 1550000, 1575000, +}; + +static const int dcdc2_voltages[] = { + 1400000, 1450000, 1500000, 1550000, + 1600000, 1650000, 1700000, 1750000, + 1800000, 1850000, 1900000, 1950000, + 2000000, 2050000, 2100000, 2150000, + 2200000, 2250000, 2300000, 2350000, + 2400000, 2450000, 2500000, 2550000, + 2600000, 2650000, 2700000, 2750000, + 2800000, 2850000, 2900000, 2950000, +}; + +static const int dcdc3_voltages[] = { + 2400000, 2450000, 2500000, 2550000, 2600000, + 2650000, 2700000, 2750000, 2800000, 2850000, + 2900000, 2950000, 3000000, 3050000, 3100000, + 3150000, 3200000, 3250000, 3300000, 3350000, + 3400000, 3450000, 3500000, 3550000, 3600000, +}; + +static const int ldo1_voltages[] = { + 4300000, 4350000, 4400000, 4450000, + 4500000, 4550000, 4600000, 4650000, + 4700000, 4750000, 4800000, 4850000, + 4900000, 4950000, 5000000, 5050000, +}; + +static const int ldo2_voltages[] = { + 1100000, 1150000, 1200000, 1250000, + 1300000, 1700000, 1750000, 1800000, + 1850000, 1900000, 3150000, 3200000, + 3250000, 3300000, 3350000, 3400000, +}; + +static const int ldo_ilimsel[] = { + 400000, 1500000 +}; + +static const int usb_ilimsel[] = { + 200000, 400000, 800000, 1000000 +}; + +#define __MK_FIELD(_reg, _mask, _shift) \ + { .reg = (_reg), .mask = (_mask), .shift = (_shift), } + +static const struct supply_info supply_info[N_REGULATORS] = { + { + .name = "DCDC1", + .flags = FIXED_ILIMSEL, + .n_voltages = ARRAY_SIZE(dcdc1_voltages), + .voltages = dcdc1_voltages, + .fixed_ilimsel = 2400000, + .enable = __MK_FIELD(REG_DCDC_EN, DCDCDCDC_EN_MASK, + DCDCDCDC1_EN_SHIFT), + .voltage = __MK_FIELD(REG_DCDC_SET, DCDC_VDCDC_MASK, + DCDC_VDCDC1_SHIFT), + }, + { + .name = "DCDC2", + .flags = FIXED_ILIMSEL, + .n_voltages = ARRAY_SIZE(dcdc2_voltages), + .voltages = dcdc2_voltages, + .fixed_ilimsel = 1200000, + .enable = __MK_FIELD(REG_DCDC_EN, DCDCDCDC_EN_MASK, + DCDCDCDC2_EN_SHIFT), + .voltage = __MK_FIELD(REG_DCDC_SET, DCDC_VDCDC_MASK, + DCDC_VDCDC2_SHIFT), + }, + { + .name = "DCDC3", + .flags = FIXED_ILIMSEL, + .n_voltages = ARRAY_SIZE(dcdc3_voltages), + .voltages = dcdc3_voltages, + .fixed_ilimsel = 1200000, + .enable = __MK_FIELD(REG_DCDC_EN, DCDCDCDC_EN_MASK, + DCDCDCDC3_EN_SHIFT), + .voltage = __MK_FIELD(REG_DCDC_SET, DCDC_VDCDC_MASK, + DCDC_VDCDC3_SHIFT), + }, + { + .name = "LDO1", + .n_voltages = ARRAY_SIZE(ldo1_voltages), + .voltages = ldo1_voltages, + .n_ilimsels = ARRAY_SIZE(ldo_ilimsel), + .ilimsels = ldo_ilimsel, + .enable = __MK_FIELD(REG_BLOCK_EN, BLOCK_MASK, + BLOCK_LDO1_SHIFT), + .voltage = __MK_FIELD(REG_LDO_SET, LDO_VSEL_MASK, + LDO1_VSEL_SHIFT), + .ilimsel = __MK_FIELD(REG_LDO_SET, LDO_ILIM_MASK, + LDO1_ILIM_SHIFT), + }, + { + .name = "LDO2", + .n_voltages = ARRAY_SIZE(ldo2_voltages), + .voltages = ldo2_voltages, + .n_ilimsels = ARRAY_SIZE(ldo_ilimsel), + .ilimsels = ldo_ilimsel, + .enable = __MK_FIELD(REG_BLOCK_EN, BLOCK_MASK, + BLOCK_LDO2_SHIFT), + .voltage = __MK_FIELD(REG_LDO_SET, LDO_VSEL_MASK, + LDO2_VSEL_SHIFT), + .ilimsel = __MK_FIELD(REG_LDO_SET, LDO_ILIM_MASK, + LDO2_ILIM_SHIFT), + }, + { + .name = "USB", + .flags = FIXED_VOLTAGE, + .fixed_voltage = 5000000, + .n_ilimsels = ARRAY_SIZE(usb_ilimsel), + .ilimsels = usb_ilimsel, + .enable = __MK_FIELD(REG_BLOCK_EN, BLOCK_MASK, + BLOCK_USB_SHIFT), + .ilimsel = __MK_FIELD(REG_USB, USB_ILIM_MASK, + USB_ILIM_SHIFT), + }, + { + .name = "LCD", + .flags = FIXED_VOLTAGE | FIXED_ILIMSEL, + .fixed_voltage = 5000000, + .fixed_ilimsel = 400000, + .enable = __MK_FIELD(REG_BLOCK_EN, BLOCK_MASK, + BLOCK_LCD_SHIFT), + }, +}; + +static int list_voltage(struct regulator_dev *rdev, unsigned selector) +{ + const struct supply_info *info; + struct tps6524x *hw; + + hw = rdev_get_drvdata(rdev); + info = &supply_info[rdev_get_id(rdev)]; + + if (info->flags & FIXED_VOLTAGE) + return selector ? -EINVAL : info->fixed_voltage; + + if (selector < 0 || selector >= info->n_voltages) + return -EINVAL; + + return info->voltages[selector]; +} + +static int set_voltage(struct regulator_dev *rdev, int min_uV, int max_uV) +{ + const struct supply_info *info; + struct tps6524x *hw; + int i; + + hw = rdev_get_drvdata(rdev); + info = &supply_info[rdev_get_id(rdev)]; + + if (info->flags & FIXED_VOLTAGE) + return -EINVAL; + + for (i = 0; i < info->n_voltages; i++) + if (min_uV <= info->voltages[i] && + max_uV >= info->voltages[i]) + break; + + if (i >= info->n_voltages) + return -EINVAL; + + return write_field(hw, &info->voltage, i); +} + +static int get_voltage(struct regulator_dev *rdev) +{ + const struct supply_info *info; + struct tps6524x *hw; + int ret; + + hw = rdev_get_drvdata(rdev); + info = &supply_info[rdev_get_id(rdev)]; + + if (info->flags & FIXED_VOLTAGE) + return info->fixed_voltage; + + ret = read_field(hw, &info->voltage); + if (ret < 0) + return ret; + if (WARN_ON(ret >= info->n_voltages)) + return -EIO; + + return info->voltages[ret]; +} + +static int set_current_limit(struct regulator_dev *rdev, int min_uA, + int max_uA) +{ + const struct supply_info *info; + struct tps6524x *hw; + int i; + + hw = rdev_get_drvdata(rdev); + info = &supply_info[rdev_get_id(rdev)]; + + if (info->flags & FIXED_ILIMSEL) + return -EINVAL; + + for (i = 0; i < info->n_ilimsels; i++) + if (min_uA <= info->ilimsels[i] && + max_uA >= info->ilimsels[i]) + break; + + if (i >= info->n_ilimsels) + return -EINVAL; + + return write_field(hw, &info->ilimsel, i); +} + +static int get_current_limit(struct regulator_dev *rdev) +{ + const struct supply_info *info; + struct tps6524x *hw; + int ret; + + hw = rdev_get_drvdata(rdev); + info = &supply_info[rdev_get_id(rdev)]; + + if (info->flags & FIXED_ILIMSEL) + return info->fixed_ilimsel; + + ret = read_field(hw, &info->ilimsel); + if (ret < 0) + return ret; + if (WARN_ON(ret >= info->n_ilimsels)) + return -EIO; + + return info->ilimsels[ret]; +} + +static int enable_supply(struct regulator_dev *rdev) +{ + const struct supply_info *info; + struct tps6524x *hw; + + hw = rdev_get_drvdata(rdev); + info = &supply_info[rdev_get_id(rdev)]; + + return write_field(hw, &info->enable, 1); +} + +static int disable_supply(struct regulator_dev *rdev) +{ + const struct supply_info *info; + struct tps6524x *hw; + + hw = rdev_get_drvdata(rdev); + info = &supply_info[rdev_get_id(rdev)]; + + return write_field(hw, &info->enable, 0); +} + +static int is_supply_enabled(struct regulator_dev *rdev) +{ + const struct supply_info *info; + struct tps6524x *hw; + + hw = rdev_get_drvdata(rdev); + info = &supply_info[rdev_get_id(rdev)]; + + return read_field(hw, &info->enable); +} + +static struct regulator_ops regulator_ops = { + .is_enabled = is_supply_enabled, + .enable = enable_supply, + .disable = disable_supply, + .get_voltage = get_voltage, + .set_voltage = set_voltage, + .list_voltage = list_voltage, + .set_current_limit = set_current_limit, + .get_current_limit = get_current_limit, +}; + +static int __devexit pmic_remove(struct spi_device *spi) +{ + struct tps6524x *hw = spi_get_drvdata(spi); + int i; + + if (!hw) + return 0; + for (i = 0; i < N_REGULATORS; i++) { + if (hw->rdev[i]) + regulator_unregister(hw->rdev[i]); + hw->rdev[i] = NULL; + } + spi_set_drvdata(spi, NULL); + kfree(hw); + return 0; +} + +static int __devinit pmic_probe(struct spi_device *spi) +{ + struct tps6524x *hw; + struct device *dev = &spi->dev; + const struct supply_info *info = supply_info; + struct regulator_init_data *init_data; + int ret = 0, i; + + init_data = dev->platform_data; + if (!init_data) { + dev_err(dev, "could not find regulator platform data\n"); + return -EINVAL; + } + + hw = kzalloc(sizeof(struct tps6524x), GFP_KERNEL); + if (!hw) { + dev_err(dev, "cannot allocate regulator private data\n"); + return -ENOMEM; + } + spi_set_drvdata(spi, hw); + + memset(hw, 0, sizeof(struct tps6524x)); + hw->dev = dev; + hw->spi = spi_dev_get(spi); + mutex_init(&hw->lock); + + for (i = 0; i < N_REGULATORS; i++, info++, init_data++) { + hw->desc[i].name = info->name; + hw->desc[i].id = i; + hw->desc[i].n_voltages = info->n_voltages; + hw->desc[i].ops = ®ulator_ops; + hw->desc[i].type = REGULATOR_VOLTAGE; + hw->desc[i].owner = THIS_MODULE; + + if (info->flags & FIXED_VOLTAGE) + hw->desc[i].n_voltages = 1; + + hw->rdev[i] = regulator_register(&hw->desc[i], dev, + init_data, hw); + if (IS_ERR(hw->rdev[i])) { + ret = PTR_ERR(hw->rdev[i]); + hw->rdev[i] = NULL; + goto fail; + } + } + + return 0; + +fail: + pmic_remove(spi); + return ret; +} + +static struct spi_driver pmic_driver = { + .probe = pmic_probe, + .remove = __devexit_p(pmic_remove), + .driver = { + .name = "tps6524x", + .owner = THIS_MODULE, + }, +}; + +static int __init pmic_driver_init(void) +{ + return spi_register_driver(&pmic_driver); +} +subsys_initcall_sync(pmic_driver_init); + +static void __exit pmic_driver_exit(void) +{ + spi_unregister_driver(&pmic_driver); +} +module_exit(pmic_driver_exit); + +MODULE_DESCRIPTION("TPS6524X PMIC Driver"); +MODULE_AUTHOR("Cyril Chemparathy"); +MODULE_LICENSE("GPL"); +MODULE_ALIAS("spi:tps6524x"); -- 1.7.1 ------------------------------------------------------------------------------ Centralized Desktop Delivery: Dell and VMware Reference Architecture Simplifying enterprise desktop deployment and management using Dell EqualLogic storage and VMware View: A highly scalable, end-to-end client virtualization framework. Read more! http://p.sf.net/sfu/dell-eql-dev2dev From mboxrd@z Thu Jan 1 00:00:00 1970 From: cyril@ti.com (Cyril Chemparathy) Date: Mon, 15 Nov 2010 14:12:08 -0500 Subject: [PATCH v5 06/12] regulator: add driver for tps6524x regulator In-Reply-To: <1289848334-8695-1-git-send-email-cyril@ti.com> References: <1289848334-8695-1-git-send-email-cyril@ti.com> Message-ID: <1289848334-8695-7-git-send-email-cyril@ti.com> To: linux-arm-kernel@lists.infradead.org List-Id: linux-arm-kernel.lists.infradead.org TPS6524X provides three step-down converters and two general-purpose LDO voltage regulators. This device is interfaced using SPI. Acked-by: Mark Brown Signed-off-by: Cyril Chemparathy --- drivers/regulator/Kconfig | 10 + drivers/regulator/Makefile | 1 + drivers/regulator/tps6524x-regulator.c | 692 ++++++++++++++++++++++++++++++++ 3 files changed, 703 insertions(+), 0 deletions(-) create mode 100644 drivers/regulator/tps6524x-regulator.c diff --git a/drivers/regulator/Kconfig b/drivers/regulator/Kconfig index 172951b..a6f8536 100644 --- a/drivers/regulator/Kconfig +++ b/drivers/regulator/Kconfig @@ -235,5 +235,15 @@ config REGULATOR_TPS6586X help This driver supports TPS6586X voltage regulator chips. +config REGULATOR_TPS6524X + tristate "TI TPS6524X Power regulators" + depends on SPI + help + This driver supports TPS6524X voltage regulator chips. TPS6524X + provides three step-down converters and two general-purpose LDO + voltage regulators. This device is interfaced using a customized + serial interface currently supported on the sequencer serial + port controller. + endif diff --git a/drivers/regulator/Makefile b/drivers/regulator/Makefile index 8285fd8..a8e5bc0 100644 --- a/drivers/regulator/Makefile +++ b/drivers/regulator/Makefile @@ -33,6 +33,7 @@ obj-$(CONFIG_REGULATOR_AB3100) += ab3100.o obj-$(CONFIG_REGULATOR_TPS65023) += tps65023-regulator.o obj-$(CONFIG_REGULATOR_TPS6507X) += tps6507x-regulator.o +obj-$(CONFIG_REGULATOR_TPS6524X) += tps6524x-regulator.o obj-$(CONFIG_REGULATOR_88PM8607) += 88pm8607.o obj-$(CONFIG_REGULATOR_ISL6271A) += isl6271a-regulator.o obj-$(CONFIG_REGULATOR_AB8500) += ab8500.o diff --git a/drivers/regulator/tps6524x-regulator.c b/drivers/regulator/tps6524x-regulator.c new file mode 100644 index 0000000..6d6cc5e --- /dev/null +++ b/drivers/regulator/tps6524x-regulator.c @@ -0,0 +1,692 @@ +/* + * Regulator driver for TPS6524x PMIC + * + * Copyright (C) 2010 Texas Instruments + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation version 2. + * + * This program is distributed "as is" WITHOUT ANY WARRANTY of any kind, + * whether express or implied; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + */ + +#include +#include +#include +#include +#include +#include +#include +#include + +#define REG_LDO_SET 0x0 +#define LDO_ILIM_MASK 1 /* 0 = 400-800, 1 = 900-1500 */ +#define LDO_VSEL_MASK 0x0f +#define LDO2_ILIM_SHIFT 12 +#define LDO2_VSEL_SHIFT 4 +#define LDO1_ILIM_SHIFT 8 +#define LDO1_VSEL_SHIFT 0 + +#define REG_BLOCK_EN 0x1 +#define BLOCK_MASK 1 +#define BLOCK_LDO1_SHIFT 0 +#define BLOCK_LDO2_SHIFT 1 +#define BLOCK_LCD_SHIFT 2 +#define BLOCK_USB_SHIFT 3 + +#define REG_DCDC_SET 0x2 +#define DCDC_VDCDC_MASK 0x1f +#define DCDC_VDCDC1_SHIFT 0 +#define DCDC_VDCDC2_SHIFT 5 +#define DCDC_VDCDC3_SHIFT 10 + +#define REG_DCDC_EN 0x3 +#define DCDCDCDC_EN_MASK 0x1 +#define DCDCDCDC1_EN_SHIFT 0 +#define DCDCDCDC1_PG_MSK BIT(1) +#define DCDCDCDC2_EN_SHIFT 2 +#define DCDCDCDC2_PG_MSK BIT(3) +#define DCDCDCDC3_EN_SHIFT 4 +#define DCDCDCDC3_PG_MSK BIT(5) + +#define REG_USB 0x4 +#define USB_ILIM_SHIFT 0 +#define USB_ILIM_MASK 0x3 +#define USB_TSD_SHIFT 2 +#define USB_TSD_MASK 0x3 +#define USB_TWARN_SHIFT 4 +#define USB_TWARN_MASK 0x3 +#define USB_IWARN_SD BIT(6) +#define USB_FAST_LOOP BIT(7) + +#define REG_ALARM 0x5 +#define ALARM_LDO1 BIT(0) +#define ALARM_DCDC1 BIT(1) +#define ALARM_DCDC2 BIT(2) +#define ALARM_DCDC3 BIT(3) +#define ALARM_LDO2 BIT(4) +#define ALARM_USB_WARN BIT(5) +#define ALARM_USB_ALARM BIT(6) +#define ALARM_LCD BIT(9) +#define ALARM_TEMP_WARM BIT(10) +#define ALARM_TEMP_HOT BIT(11) +#define ALARM_NRST BIT(14) +#define ALARM_POWERUP BIT(15) + +#define REG_INT_ENABLE 0x6 +#define INT_LDO1 BIT(0) +#define INT_DCDC1 BIT(1) +#define INT_DCDC2 BIT(2) +#define INT_DCDC3 BIT(3) +#define INT_LDO2 BIT(4) +#define INT_USB_WARN BIT(5) +#define INT_USB_ALARM BIT(6) +#define INT_LCD BIT(9) +#define INT_TEMP_WARM BIT(10) +#define INT_TEMP_HOT BIT(11) +#define INT_GLOBAL_EN BIT(15) + +#define REG_INT_STATUS 0x7 +#define STATUS_LDO1 BIT(0) +#define STATUS_DCDC1 BIT(1) +#define STATUS_DCDC2 BIT(2) +#define STATUS_DCDC3 BIT(3) +#define STATUS_LDO2 BIT(4) +#define STATUS_USB_WARN BIT(5) +#define STATUS_USB_ALARM BIT(6) +#define STATUS_LCD BIT(9) +#define STATUS_TEMP_WARM BIT(10) +#define STATUS_TEMP_HOT BIT(11) + +#define REG_SOFTWARE_RESET 0xb +#define REG_WRITE_ENABLE 0xd +#define REG_REV_ID 0xf + +#define N_DCDC 3 +#define N_LDO 2 +#define N_SWITCH 2 +#define N_REGULATORS (3 /* DCDC */ + \ + 2 /* LDO */ + \ + 2 /* switch */) + +#define FIXED_ILIMSEL BIT(0) +#define FIXED_VOLTAGE BIT(1) + +#define CMD_READ(reg) ((reg) << 6) +#define CMD_WRITE(reg) (BIT(5) | (reg) << 6) +#define STAT_CLK BIT(3) +#define STAT_WRITE BIT(2) +#define STAT_INVALID BIT(1) +#define STAT_WP BIT(0) + +struct field { + int reg; + int shift; + int mask; +}; + +struct supply_info { + const char *name; + int n_voltages; + const int *voltages; + int fixed_voltage; + int n_ilimsels; + const int *ilimsels; + int fixed_ilimsel; + int flags; + struct field enable, voltage, ilimsel; +}; + +struct tps6524x { + struct device *dev; + struct spi_device *spi; + struct mutex lock; + struct regulator_desc desc[N_REGULATORS]; + struct regulator_dev *rdev[N_REGULATORS]; +}; + +static int __read_reg(struct tps6524x *hw, int reg) +{ + int error = 0; + u16 cmd = CMD_READ(reg), in; + u8 status; + struct spi_message m; + struct spi_transfer t[3]; + + spi_message_init(&m); + memset(t, 0, sizeof(t)); + + t[0].tx_buf = &cmd; + t[0].len = 2; + t[0].bits_per_word = 12; + spi_message_add_tail(&t[0], &m); + + t[1].rx_buf = ∈ + t[1].len = 2; + t[1].bits_per_word = 16; + spi_message_add_tail(&t[1], &m); + + t[2].rx_buf = &status; + t[2].len = 1; + t[2].bits_per_word = 4; + spi_message_add_tail(&t[2], &m); + + error = spi_sync(hw->spi, &m); + if (error < 0) + return error; + + dev_dbg(hw->dev, "read reg %d, data %x, status %x\n", + reg, in, status); + + if (!(status & STAT_CLK) || (status & STAT_WRITE)) + return -EIO; + + if (status & STAT_INVALID) + return -EINVAL; + + return in; +} + +static int read_reg(struct tps6524x *hw, int reg) +{ + int ret; + + mutex_lock(&hw->lock); + ret = __read_reg(hw, reg); + mutex_unlock(&hw->lock); + + return ret; +} + +static int __write_reg(struct tps6524x *hw, int reg, int val) +{ + int error = 0; + u16 cmd = CMD_WRITE(reg), out = val; + u8 status; + struct spi_message m; + struct spi_transfer t[3]; + + spi_message_init(&m); + memset(t, 0, sizeof(t)); + + t[0].tx_buf = &cmd; + t[0].len = 2; + t[0].bits_per_word = 12; + spi_message_add_tail(&t[0], &m); + + t[1].tx_buf = &out; + t[1].len = 2; + t[1].bits_per_word = 16; + spi_message_add_tail(&t[1], &m); + + t[2].rx_buf = &status; + t[2].len = 1; + t[2].bits_per_word = 4; + spi_message_add_tail(&t[2], &m); + + error = spi_sync(hw->spi, &m); + if (error < 0) + return error; + + dev_dbg(hw->dev, "wrote reg %d, data %x, status %x\n", + reg, out, status); + + if (!(status & STAT_CLK) || !(status & STAT_WRITE)) + return -EIO; + + if (status & (STAT_INVALID | STAT_WP)) + return -EINVAL; + + return error; +} + +static int __rmw_reg(struct tps6524x *hw, int reg, int mask, int val) +{ + int ret; + + ret = __read_reg(hw, reg); + if (ret < 0) + return ret; + + ret &= ~mask; + ret |= val; + + ret = __write_reg(hw, reg, ret); + + return (ret < 0) ? ret : 0; +} + +static int rmw_protect(struct tps6524x *hw, int reg, int mask, int val) +{ + int ret; + + mutex_lock(&hw->lock); + + ret = __write_reg(hw, REG_WRITE_ENABLE, 1); + if (ret) { + dev_err(hw->dev, "failed to set write enable\n"); + goto error; + } + + ret = __rmw_reg(hw, reg, mask, val); + if (ret) + dev_err(hw->dev, "failed to rmw register %d\n", reg); + + ret = __write_reg(hw, REG_WRITE_ENABLE, 0); + if (ret) { + dev_err(hw->dev, "failed to clear write enable\n"); + goto error; + } + +error: + mutex_unlock(&hw->lock); + + return ret; +} + +static int read_field(struct tps6524x *hw, const struct field *field) +{ + int tmp; + + tmp = read_reg(hw, field->reg); + if (tmp < 0) + return tmp; + + return (tmp >> field->shift) & field->mask; +} + +static int write_field(struct tps6524x *hw, const struct field *field, + int val) +{ + if (val & ~field->mask) + return -EOVERFLOW; + + return rmw_protect(hw, field->reg, + field->mask << field->shift, + val << field->shift); +} + +static const int dcdc1_voltages[] = { + 800000, 825000, 850000, 875000, + 900000, 925000, 950000, 975000, + 1000000, 1025000, 1050000, 1075000, + 1100000, 1125000, 1150000, 1175000, + 1200000, 1225000, 1250000, 1275000, + 1300000, 1325000, 1350000, 1375000, + 1400000, 1425000, 1450000, 1475000, + 1500000, 1525000, 1550000, 1575000, +}; + +static const int dcdc2_voltages[] = { + 1400000, 1450000, 1500000, 1550000, + 1600000, 1650000, 1700000, 1750000, + 1800000, 1850000, 1900000, 1950000, + 2000000, 2050000, 2100000, 2150000, + 2200000, 2250000, 2300000, 2350000, + 2400000, 2450000, 2500000, 2550000, + 2600000, 2650000, 2700000, 2750000, + 2800000, 2850000, 2900000, 2950000, +}; + +static const int dcdc3_voltages[] = { + 2400000, 2450000, 2500000, 2550000, 2600000, + 2650000, 2700000, 2750000, 2800000, 2850000, + 2900000, 2950000, 3000000, 3050000, 3100000, + 3150000, 3200000, 3250000, 3300000, 3350000, + 3400000, 3450000, 3500000, 3550000, 3600000, +}; + +static const int ldo1_voltages[] = { + 4300000, 4350000, 4400000, 4450000, + 4500000, 4550000, 4600000, 4650000, + 4700000, 4750000, 4800000, 4850000, + 4900000, 4950000, 5000000, 5050000, +}; + +static const int ldo2_voltages[] = { + 1100000, 1150000, 1200000, 1250000, + 1300000, 1700000, 1750000, 1800000, + 1850000, 1900000, 3150000, 3200000, + 3250000, 3300000, 3350000, 3400000, +}; + +static const int ldo_ilimsel[] = { + 400000, 1500000 +}; + +static const int usb_ilimsel[] = { + 200000, 400000, 800000, 1000000 +}; + +#define __MK_FIELD(_reg, _mask, _shift) \ + { .reg = (_reg), .mask = (_mask), .shift = (_shift), } + +static const struct supply_info supply_info[N_REGULATORS] = { + { + .name = "DCDC1", + .flags = FIXED_ILIMSEL, + .n_voltages = ARRAY_SIZE(dcdc1_voltages), + .voltages = dcdc1_voltages, + .fixed_ilimsel = 2400000, + .enable = __MK_FIELD(REG_DCDC_EN, DCDCDCDC_EN_MASK, + DCDCDCDC1_EN_SHIFT), + .voltage = __MK_FIELD(REG_DCDC_SET, DCDC_VDCDC_MASK, + DCDC_VDCDC1_SHIFT), + }, + { + .name = "DCDC2", + .flags = FIXED_ILIMSEL, + .n_voltages = ARRAY_SIZE(dcdc2_voltages), + .voltages = dcdc2_voltages, + .fixed_ilimsel = 1200000, + .enable = __MK_FIELD(REG_DCDC_EN, DCDCDCDC_EN_MASK, + DCDCDCDC2_EN_SHIFT), + .voltage = __MK_FIELD(REG_DCDC_SET, DCDC_VDCDC_MASK, + DCDC_VDCDC2_SHIFT), + }, + { + .name = "DCDC3", + .flags = FIXED_ILIMSEL, + .n_voltages = ARRAY_SIZE(dcdc3_voltages), + .voltages = dcdc3_voltages, + .fixed_ilimsel = 1200000, + .enable = __MK_FIELD(REG_DCDC_EN, DCDCDCDC_EN_MASK, + DCDCDCDC3_EN_SHIFT), + .voltage = __MK_FIELD(REG_DCDC_SET, DCDC_VDCDC_MASK, + DCDC_VDCDC3_SHIFT), + }, + { + .name = "LDO1", + .n_voltages = ARRAY_SIZE(ldo1_voltages), + .voltages = ldo1_voltages, + .n_ilimsels = ARRAY_SIZE(ldo_ilimsel), + .ilimsels = ldo_ilimsel, + .enable = __MK_FIELD(REG_BLOCK_EN, BLOCK_MASK, + BLOCK_LDO1_SHIFT), + .voltage = __MK_FIELD(REG_LDO_SET, LDO_VSEL_MASK, + LDO1_VSEL_SHIFT), + .ilimsel = __MK_FIELD(REG_LDO_SET, LDO_ILIM_MASK, + LDO1_ILIM_SHIFT), + }, + { + .name = "LDO2", + .n_voltages = ARRAY_SIZE(ldo2_voltages), + .voltages = ldo2_voltages, + .n_ilimsels = ARRAY_SIZE(ldo_ilimsel), + .ilimsels = ldo_ilimsel, + .enable = __MK_FIELD(REG_BLOCK_EN, BLOCK_MASK, + BLOCK_LDO2_SHIFT), + .voltage = __MK_FIELD(REG_LDO_SET, LDO_VSEL_MASK, + LDO2_VSEL_SHIFT), + .ilimsel = __MK_FIELD(REG_LDO_SET, LDO_ILIM_MASK, + LDO2_ILIM_SHIFT), + }, + { + .name = "USB", + .flags = FIXED_VOLTAGE, + .fixed_voltage = 5000000, + .n_ilimsels = ARRAY_SIZE(usb_ilimsel), + .ilimsels = usb_ilimsel, + .enable = __MK_FIELD(REG_BLOCK_EN, BLOCK_MASK, + BLOCK_USB_SHIFT), + .ilimsel = __MK_FIELD(REG_USB, USB_ILIM_MASK, + USB_ILIM_SHIFT), + }, + { + .name = "LCD", + .flags = FIXED_VOLTAGE | FIXED_ILIMSEL, + .fixed_voltage = 5000000, + .fixed_ilimsel = 400000, + .enable = __MK_FIELD(REG_BLOCK_EN, BLOCK_MASK, + BLOCK_LCD_SHIFT), + }, +}; + +static int list_voltage(struct regulator_dev *rdev, unsigned selector) +{ + const struct supply_info *info; + struct tps6524x *hw; + + hw = rdev_get_drvdata(rdev); + info = &supply_info[rdev_get_id(rdev)]; + + if (info->flags & FIXED_VOLTAGE) + return selector ? -EINVAL : info->fixed_voltage; + + if (selector < 0 || selector >= info->n_voltages) + return -EINVAL; + + return info->voltages[selector]; +} + +static int set_voltage(struct regulator_dev *rdev, int min_uV, int max_uV) +{ + const struct supply_info *info; + struct tps6524x *hw; + int i; + + hw = rdev_get_drvdata(rdev); + info = &supply_info[rdev_get_id(rdev)]; + + if (info->flags & FIXED_VOLTAGE) + return -EINVAL; + + for (i = 0; i < info->n_voltages; i++) + if (min_uV <= info->voltages[i] && + max_uV >= info->voltages[i]) + break; + + if (i >= info->n_voltages) + return -EINVAL; + + return write_field(hw, &info->voltage, i); +} + +static int get_voltage(struct regulator_dev *rdev) +{ + const struct supply_info *info; + struct tps6524x *hw; + int ret; + + hw = rdev_get_drvdata(rdev); + info = &supply_info[rdev_get_id(rdev)]; + + if (info->flags & FIXED_VOLTAGE) + return info->fixed_voltage; + + ret = read_field(hw, &info->voltage); + if (ret < 0) + return ret; + if (WARN_ON(ret >= info->n_voltages)) + return -EIO; + + return info->voltages[ret]; +} + +static int set_current_limit(struct regulator_dev *rdev, int min_uA, + int max_uA) +{ + const struct supply_info *info; + struct tps6524x *hw; + int i; + + hw = rdev_get_drvdata(rdev); + info = &supply_info[rdev_get_id(rdev)]; + + if (info->flags & FIXED_ILIMSEL) + return -EINVAL; + + for (i = 0; i < info->n_ilimsels; i++) + if (min_uA <= info->ilimsels[i] && + max_uA >= info->ilimsels[i]) + break; + + if (i >= info->n_ilimsels) + return -EINVAL; + + return write_field(hw, &info->ilimsel, i); +} + +static int get_current_limit(struct regulator_dev *rdev) +{ + const struct supply_info *info; + struct tps6524x *hw; + int ret; + + hw = rdev_get_drvdata(rdev); + info = &supply_info[rdev_get_id(rdev)]; + + if (info->flags & FIXED_ILIMSEL) + return info->fixed_ilimsel; + + ret = read_field(hw, &info->ilimsel); + if (ret < 0) + return ret; + if (WARN_ON(ret >= info->n_ilimsels)) + return -EIO; + + return info->ilimsels[ret]; +} + +static int enable_supply(struct regulator_dev *rdev) +{ + const struct supply_info *info; + struct tps6524x *hw; + + hw = rdev_get_drvdata(rdev); + info = &supply_info[rdev_get_id(rdev)]; + + return write_field(hw, &info->enable, 1); +} + +static int disable_supply(struct regulator_dev *rdev) +{ + const struct supply_info *info; + struct tps6524x *hw; + + hw = rdev_get_drvdata(rdev); + info = &supply_info[rdev_get_id(rdev)]; + + return write_field(hw, &info->enable, 0); +} + +static int is_supply_enabled(struct regulator_dev *rdev) +{ + const struct supply_info *info; + struct tps6524x *hw; + + hw = rdev_get_drvdata(rdev); + info = &supply_info[rdev_get_id(rdev)]; + + return read_field(hw, &info->enable); +} + +static struct regulator_ops regulator_ops = { + .is_enabled = is_supply_enabled, + .enable = enable_supply, + .disable = disable_supply, + .get_voltage = get_voltage, + .set_voltage = set_voltage, + .list_voltage = list_voltage, + .set_current_limit = set_current_limit, + .get_current_limit = get_current_limit, +}; + +static int __devexit pmic_remove(struct spi_device *spi) +{ + struct tps6524x *hw = spi_get_drvdata(spi); + int i; + + if (!hw) + return 0; + for (i = 0; i < N_REGULATORS; i++) { + if (hw->rdev[i]) + regulator_unregister(hw->rdev[i]); + hw->rdev[i] = NULL; + } + spi_set_drvdata(spi, NULL); + kfree(hw); + return 0; +} + +static int __devinit pmic_probe(struct spi_device *spi) +{ + struct tps6524x *hw; + struct device *dev = &spi->dev; + const struct supply_info *info = supply_info; + struct regulator_init_data *init_data; + int ret = 0, i; + + init_data = dev->platform_data; + if (!init_data) { + dev_err(dev, "could not find regulator platform data\n"); + return -EINVAL; + } + + hw = kzalloc(sizeof(struct tps6524x), GFP_KERNEL); + if (!hw) { + dev_err(dev, "cannot allocate regulator private data\n"); + return -ENOMEM; + } + spi_set_drvdata(spi, hw); + + memset(hw, 0, sizeof(struct tps6524x)); + hw->dev = dev; + hw->spi = spi_dev_get(spi); + mutex_init(&hw->lock); + + for (i = 0; i < N_REGULATORS; i++, info++, init_data++) { + hw->desc[i].name = info->name; + hw->desc[i].id = i; + hw->desc[i].n_voltages = info->n_voltages; + hw->desc[i].ops = ®ulator_ops; + hw->desc[i].type = REGULATOR_VOLTAGE; + hw->desc[i].owner = THIS_MODULE; + + if (info->flags & FIXED_VOLTAGE) + hw->desc[i].n_voltages = 1; + + hw->rdev[i] = regulator_register(&hw->desc[i], dev, + init_data, hw); + if (IS_ERR(hw->rdev[i])) { + ret = PTR_ERR(hw->rdev[i]); + hw->rdev[i] = NULL; + goto fail; + } + } + + return 0; + +fail: + pmic_remove(spi); + return ret; +} + +static struct spi_driver pmic_driver = { + .probe = pmic_probe, + .remove = __devexit_p(pmic_remove), + .driver = { + .name = "tps6524x", + .owner = THIS_MODULE, + }, +}; + +static int __init pmic_driver_init(void) +{ + return spi_register_driver(&pmic_driver); +} +subsys_initcall_sync(pmic_driver_init); + +static void __exit pmic_driver_exit(void) +{ + spi_unregister_driver(&pmic_driver); +} +module_exit(pmic_driver_exit); + +MODULE_DESCRIPTION("TPS6524X PMIC Driver"); +MODULE_AUTHOR("Cyril Chemparathy"); +MODULE_LICENSE("GPL"); +MODULE_ALIAS("spi:tps6524x"); -- 1.7.1