From: Michael Schwingen <michael@schwingen.org>
To: u-boot@lists.denx.de
Subject: [U-Boot] [PATCH 09/13] update/fix AcTux3 board
Date: Mon, 3 Jan 2011 14:45:34 +0100 [thread overview]
Message-ID: <1294062338-21084-10-git-send-email-michael@schwingen.org> (raw)
In-Reply-To: <1294062338-21084-1-git-send-email-michael@schwingen.org>
Signed-off-by: Michael Schwingen <michael@schwingen.org>
---
board/actux3/actux3.c | 27 ++++++++++++++-----------
board/actux3/config.mk | 7 +----
board/actux3/u-boot.lds | 47 ++++++++++++++++++++++++++++-----------------
include/configs/actux3.h | 23 ++++++++++++++++-----
4 files changed, 63 insertions(+), 41 deletions(-)
diff --git a/board/actux3/actux3.c b/board/actux3/actux3.c
index 63bf365..8875148 100644
--- a/board/actux3/actux3.c
+++ b/board/actux3/actux3.c
@@ -43,6 +43,19 @@
DECLARE_GLOBAL_DATA_PTR;
+int board_early_init_f (void)
+{
+ /* CS1: IPAC-X */
+ *IXP425_EXP_CS1 = 0x94d10013;
+ /* CS5: Debug port */
+ *IXP425_EXP_CS5 = 0x9d520003;
+ /* CS6: Release/Option register */
+ *IXP425_EXP_CS6 = 0x81860001;
+ /* CS7: LEDs */
+ *IXP425_EXP_CS7 = 0x80900003;
+ return 0;
+}
+
int board_init (void)
{
gd->bd->bi_arch_number = MACH_TYPE_ACTUX3;
@@ -81,15 +94,7 @@ int board_init (void)
GPIO_OUTPUT_ENABLE (CONFIG_SYS_GPIO_EXTBUS_CLK);
*IXP425_GPIO_GPCLKR = 0x011001FF;
- /* CS1: IPAC-X */
- *IXP425_EXP_CS1 = 0x94d10013;
- /* CS5: Debug port */
- *IXP425_EXP_CS5 = 0x9d520003;
- /* CS6: Release/Option register */
- *IXP425_EXP_CS6 = 0x81860001;
- /* CS7: LEDs */
- *IXP425_EXP_CS7 = 0x80900003;
-
+ /* we need a minimum PCI reset pulse width after enabling the clock */
udelay (533);
GPIO_OUTPUT_SET (CONFIG_SYS_GPIO_IORST);
GPIO_OUTPUT_SET (CONFIG_SYS_GPIO_ETHRST);
@@ -138,9 +143,7 @@ u32 get_board_rev (void)
int dram_init (void)
{
- gd->bd->bi_dram[0].start = PHYS_SDRAM_1;
- gd->bd->bi_dram[0].size = PHYS_SDRAM_1_SIZE;
-
+ gd->ram_size = PHYS_SDRAM_1_SIZE;
return (0);
}
diff --git a/board/actux3/config.mk b/board/actux3/config.mk
index 88634f7..a370337 100644
--- a/board/actux3/config.mk
+++ b/board/actux3/config.mk
@@ -1,6 +1,3 @@
-CONFIG_SYS_TEXT_BASE = 0x00e00000
-
-# include NPE ethernet driver
-BOARDLIBS = arch/arm/cpu/ixp/npe/libnpe.o
-
LDSCRIPT := $(SRCTREE)/board/$(BOARDDIR)/u-boot.lds
+PLATFORM_RELFLAGS += -ffunction-sections -fdata-sections
+PLATFORM_LDFLAGS += --gc-sections
diff --git a/board/actux3/u-boot.lds b/board/actux3/u-boot.lds
index 497ab97..d4f6960 100644
--- a/board/actux3/u-boot.lds
+++ b/board/actux3/u-boot.lds
@@ -30,34 +30,29 @@ SECTIONS
. = ALIGN (4);
.text : {
- arch/arm/cpu/ixp/start.o (.text)
- lib/string.o (.text)
- lib/vsprintf.o (.text)
- arch/arm/lib/board.o (.text)
- common/dlmalloc.o (.text)
- arch/arm/cpu/ixp/cpu.o (.text)
+ arch/arm/cpu/ixp/start.o(.text*)
+ net/libnet.o(.text*)
+ board/actux3/libactux3.o(.text*)
+ arch/arm/cpu/ixp/libixp.o(.text*)
+ drivers/serial/libserial.o(.text*)
. = env_offset;
- common/env_embedded.o (.ppcenv)
-
- * (.text)
+ common/env_embedded.o(.ppcenv)
+ *(.text*)
}
. = ALIGN (4);
.rodata : {
*(SORT_BY_ALIGNMENT(SORT_BY_NAME(.rodata*)))
}
-
. = ALIGN (4);
.data : {
- *(.data)
+ *(.data*)
}
-
. = ALIGN (4);
.got : {
*(.got)
}
-
. =.;
__u_boot_cmd_start =.;
.u_boot_cmd : {
@@ -66,10 +61,26 @@ SECTIONS
__u_boot_cmd_end =.;
. = ALIGN (4);
- __bss_start =.;
- .bss (NOLOAD): {
- *(.bss)
- . = ALIGN(4);
+ .rel.dyn : {
+ __rel_dyn_start = .;
+ *(.rel*)
+ __rel_dyn_end = .;
+ }
+
+ .dynsym : {
+ __dynsym_start = .;
+ *(.dynsym)
+ }
+
+ .bss __rel_dyn_start (OVERLAY) : {
+ __bss_start = .;
+ *(.bss*)
+ . = ALIGN(4);
+ _end = .;
}
- _end =.;
+ /DISCARD/ : { *(.dynstr*) }
+ /DISCARD/ : { *(.dynamic*) }
+ /DISCARD/ : { *(.plt*) }
+ /DISCARD/ : { *(.interp*) }
+ /DISCARD/ : { *(.gnu*) }
}
diff --git a/include/configs/actux3.h b/include/configs/actux3.h
index ad9173f..4b9b496 100644
--- a/include/configs/actux3.h
+++ b/include/configs/actux3.h
@@ -37,6 +37,7 @@
#define CONFIG_BAUDRATE 115200
#define CONFIG_BOOTDELAY 3
#define CONFIG_ZERO_BOOTDELAY_CHECK /* check for keypress on bootdelay==0 */
+#define CONFIG_BOARD_EARLY_INIT_F 1
/***************************************************************
* U-boot generic defines start here.
@@ -45,7 +46,6 @@
/* Size of malloc() pool */
#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 128*1024)
-/* size in bytes reserved for initial data */
/* allow to overwrite serial and ethaddr */
#define CONFIG_ENV_OVERWRITE
@@ -83,8 +83,9 @@
#define CONFIG_SYS_MEMTEST_START 0x00400000
#define CONFIG_SYS_MEMTEST_END 0x00800000
-/* spec says 66.666 MHz, but it appears to be 33 */
-#define CONFIG_SYS_HZ 3333333
+/* timer clock - 2* OSC_IN system clock */
+#define CONFIG_IXP425_TIMER_CLK 66666666
+#define CONFIG_SYS_HZ 1000
/* default load address */
#define CONFIG_SYS_LOAD_ADDR 0x00010000
@@ -111,7 +112,7 @@
/* SDRAM settings */
#define CONFIG_NR_DRAM_BANKS 1
#define PHYS_SDRAM_1 0x00000000
-#define CONFIG_SYS_DRAM_BASE 0x00000000
+#define CONFIG_SYS_SDRAM_BASE 0x00000000
/* 16MB SDRAM */
#define CONFIG_SYS_SDR_CONFIG 0x3A
@@ -121,6 +122,7 @@
#define CONFIG_SYS_DRAM_SIZE 0x01000000
/* FLASH organization */
+#define CONFIG_SYS_TEXT_BASE 0x50000000
#define CONFIG_SYS_MAX_FLASH_BANKS 1
/* max number of sectors on one chip */
#define CONFIG_SYS_MAX_FLASH_SECT 140
@@ -184,13 +186,15 @@
"npe_ucode=50040000\0" \
"mtd=IXP4XX-Flash.0:256k(uboot),64k(ucode),1152k(linux),-(root)\0" \
"kerneladdr=50050000\0" \
+ "kernelfile=actux3/uImage\0" \
+ "rootfile=actux3/rootfs\0" \
"rootaddr=50170000\0" \
"loadaddr=10000\0" \
"updateboot_ser=mw.b 10000 ff 40000;" \
" loady ${loadaddr};" \
" run eraseboot writeboot\0" \
"updateboot_net=mw.b 10000 ff 40000;" \
- " tftp ${loadaddr} u-boot.bin;" \
+ " tftp ${loadaddr} actux3/u-boot.bin;" \
" run eraseboot writeboot\0" \
"eraseboot=protect off 50000000 50003fff;" \
" protect off 50006000 5003ffff;" \
@@ -200,6 +204,9 @@
" cp.b 16000 50006000 3a000\0" \
"eraseenv=protect off 50004000 50005fff;" \
" erase 50004000 50005fff\0" \
+ "updateucode=loady;" \
+ " era ${npe_ucode} +${filesize};" \
+ " cp.b ${loadaddr} ${npe_ucode} ${filesize}\0" \
"updateroot=tftp ${loadaddr} ${rootfile};" \
" era ${rootaddr} +${filesize};" \
" cp.b ${loadaddr} ${rootaddr} ${filesize}\0" \
@@ -210,7 +217,7 @@
" rootfstype=squashfs,jffs2 init=/etc/preinit\0" \
"netargs=setenv bootargs mtdparts=${mtd} root=/dev/mtdblock3" \
" rootfstype=squashfs,jffs2 init=/etc/preinit\0" \
- "addtty=setenv bootargs ${bootargs} console=ttyS0,${baudrate}\0" \
+ "addtty=setenv bootargs ${bootargs} console=ttyS1,${baudrate}\0" \
"addeth=setenv bootargs ${bootargs} ethaddr=${ethaddr}\0" \
"boot_flash=run flashargs addtty addeth;" \
" bootm ${kerneladdr}\0" \
@@ -218,4 +225,8 @@
" tftpboot ${loadaddr} ${kernelfile};" \
" bootm\0"
+/* additions for new relocation code, must be added to all boards */
+#define CONFIG_SYS_INIT_SP_ADDR \
+ (CONFIG_SYS_SDRAM_BASE + 0x1000 - GENERATED_GBL_DATA_SIZE)
+
#endif /* __CONFIG_H */
--
1.7.2.3
next prev parent reply other threads:[~2011-01-03 13:45 UTC|newest]
Thread overview: 40+ messages / expand[flat|nested] mbox.gz Atom feed top
2011-01-03 13:45 [U-Boot] IXP42x patch series - 2nd attempt Michael Schwingen
2011-01-03 13:45 ` [U-Boot] [PATCH 01/13] add XScale sub architecture (IXP/PXA) to board list Michael Schwingen
2011-01-25 20:38 ` Wolfgang Denk
2011-01-25 23:39 ` Michael Schwingen
2011-01-26 7:30 ` Wolfgang Denk
2011-04-07 13:29 ` Marek Vasut
2011-04-07 14:58 ` Wolfgang Denk
2011-04-07 16:41 ` Marek Vasut
2011-05-20 23:49 ` Marek Vasut
2011-05-19 15:48 ` Marek Vasut
2011-01-03 13:45 ` [U-Boot] [PATCH 02/13] add support for IXP42x Rev. B1 and newer Michael Schwingen
2011-01-25 20:39 ` Wolfgang Denk
2011-01-03 13:45 ` [U-Boot] [PATCH 03/13] trigger hardware watchdog in IXP42x serial driver Michael Schwingen
2011-01-03 13:45 ` [U-Boot] [PATCH 04/13] Fix IXP code to work after relocation was added Michael Schwingen
2011-01-25 20:42 ` Wolfgang Denk
2011-01-03 13:45 ` [U-Boot] [PATCH 05/13] fix "depend" target in npe directory Michael Schwingen
2011-01-25 20:42 ` Wolfgang Denk
2011-01-26 23:22 ` Michael Schwingen
2011-01-03 13:45 ` [U-Boot] [PATCH 06/13] add wildcard to sections (for -ffunction-sections/-fdata-sections) Michael Schwingen
2011-01-03 13:45 ` [U-Boot] [PATCH 07/13] update/fix AcTux1 board Michael Schwingen
2011-01-25 20:44 ` Wolfgang Denk
2011-01-25 23:37 ` Michael Schwingen
2011-01-26 7:26 ` Wolfgang Denk
2011-01-29 15:57 ` Michael Schwingen
2011-01-31 19:01 ` Scott Wood
2011-01-31 19:20 ` Michael Schwingen
2011-01-03 13:45 ` [U-Boot] [PATCH 08/13] update/fix AcTux2 board Michael Schwingen
2011-01-25 20:46 ` Wolfgang Denk
2011-01-26 9:34 ` Michael Schwingen
2011-01-03 13:45 ` Michael Schwingen [this message]
2011-01-03 13:45 ` [U-Boot] [PATCH 10/13] update/fix AcTux4 board Michael Schwingen
2011-01-03 13:45 ` [U-Boot] [PATCH 11/13] update/fix some more IXP42x boards (only compile tested) Michael Schwingen
2011-01-25 20:47 ` Wolfgang Denk
2011-01-25 23:43 ` Michael Schwingen
2011-01-26 7:34 ` Wolfgang Denk
2011-01-03 13:45 ` [U-Boot] [PATCH 12/13] IXP NPE: add support for fixed-speed MII ports Michael Schwingen
2011-01-25 20:48 ` Wolfgang Denk
2011-01-03 13:45 ` [U-Boot] [PATCH 13/13] add dvlhost (dLAN 200 AV Wireless G) board Michael Schwingen
2011-01-25 20:36 ` Wolfgang Denk
2011-01-25 23:45 ` Michael Schwingen
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1294062338-21084-10-git-send-email-michael@schwingen.org \
--to=michael@schwingen.org \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.