From mboxrd@z Thu Jan 1 00:00:00 1970 From: Michael Schwingen Date: Mon, 3 Jan 2011 14:45:36 +0100 Subject: [U-Boot] [PATCH 11/13] update/fix some more IXP42x boards (only compile tested) In-Reply-To: <1294062338-21084-1-git-send-email-michael@schwingen.org> References: <1294062338-21084-1-git-send-email-michael@schwingen.org> Message-ID: <1294062338-21084-12-git-send-email-michael@schwingen.org> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de Signed-off-by: Michael Schwingen --- board/ixdp425/config.mk | 3 ++- board/prodrive/pdnb3/config.mk | 2 +- boards.cfg | 2 +- include/configs/ixdp425.h | 13 ++++++++++--- include/configs/ixdpg425.h | 9 ++++++--- include/configs/pdnb3.h | 6 ++++++ 6 files changed, 26 insertions(+), 9 deletions(-) diff --git a/board/ixdp425/config.mk b/board/ixdp425/config.mk index 509c894..5d6f708 100644 --- a/board/ixdp425/config.mk +++ b/board/ixdp425/config.mk @@ -1,2 +1,3 @@ # -CONFIG_SYS_TEXT_BASE = 0x00f80000 +CONFIG_SYS_TEXT_BASE = 0x50000000 + diff --git a/board/prodrive/pdnb3/config.mk b/board/prodrive/pdnb3/config.mk index 817541f..b5e6a4e 100644 --- a/board/prodrive/pdnb3/config.mk +++ b/board/prodrive/pdnb3/config.mk @@ -1,2 +1,2 @@ # -CONFIG_SYS_TEXT_BASE = 0x01f00000 +CONFIG_SYS_TEXT_BASE = 0x50000000 diff --git a/boards.cfg b/boards.cfg index 695baca..b0fc38a 100644 --- a/boards.cfg +++ b/boards.cfg @@ -130,7 +130,7 @@ actux2 arm ixp actux3 arm ixp actux4 arm ixp ixdp425 arm ixp -ixdpg425 arm ixp +ixdpg425 arm ixp ixdp425 lpd7a400 arm lh7a40x lpd7a40x lpd7a404 arm lh7a40x lpd7a40x balloon3 arm pxa diff --git a/include/configs/ixdp425.h b/include/configs/ixdp425.h index 28d41e2..81288b7 100644 --- a/include/configs/ixdp425.h +++ b/include/configs/ixdp425.h @@ -105,8 +105,10 @@ #define CONFIG_SYS_LOAD_ADDR 0x00010000 /* default load address */ -#define CONFIG_SYS_HZ 3333333 /* spec says 66.666 MHz, but it appears to be 33 */ - /* valid baudrates */ +/* timer clock - 2* OSC_IN system clock */ +#define CONFIG_IXP425_TIMER_CLK 66666666 +#define CONFIG_SYS_HZ 1000 + #define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 } /* @@ -193,7 +195,12 @@ #define CONFIG_SYS_FLASH_EMPTY_INFO /* print 'E' for empty sector on flinfo */ #define CONFIG_ENV_SECT_SIZE 0x20000 /* size of one complete sector */ -#define CONFIG_ENV_ADDR (PHYS_FLASH_1 + 0x20000) +#define CONFIG_ENV_ADDR (PHYS_FLASH_1 + 0x40000) #define CONFIG_ENV_SIZE 0x2000 /* Total Size of Environment Sector */ +/* additions for new relocation code, must be added to all boards */ +#define CONFIG_SYS_SDRAM_BASE 0 +#define CONFIG_SYS_INIT_SP_ADDR \ + (CONFIG_SYS_SDRAM_BASE + 0x1000 - GENERATED_GBL_DATA_SIZE) + #endif /* __CONFIG_H */ diff --git a/include/configs/ixdpg425.h b/include/configs/ixdpg425.h index 637fd7d..60a2371 100644 --- a/include/configs/ixdpg425.h +++ b/include/configs/ixdpg425.h @@ -53,9 +53,6 @@ /* * Misc configuration options */ -#undef CONFIG_USE_IRQ /* we don't need IRQ/FIQ stuff */ -#define CONFIG_USE_IRQ 1 /* we need IRQ stuff for timer */ -#define CONFIG_TIMER_IRQ #define CONFIG_BOOTCOUNT_LIMIT /* support for bootcount limit */ #define CONFIG_SYS_BOOTCOUNT_ADDR 0x60003000 /* inside qmrg sram */ @@ -115,6 +112,7 @@ #define CONFIG_SYS_MEMTEST_END 0x00800000 /* 4 ... 8 MB in DRAM */ #define CONFIG_SYS_LOAD_ADDR 0x00010000 /* default load address */ +#define CONFIG_IXP425_TIMER_CLK 66666666 #define CONFIG_SYS_HZ 1000 /* decrementer freq: 1 ms ticks */ /* valid baudrates */ @@ -248,4 +246,9 @@ */ #define CONFIG_SYS_CACHELINE_SIZE 32 +/* additions for new relocation code, must be added to all boards */ +#define CONFIG_SYS_SDRAM_BASE 0 +#define CONFIG_SYS_INIT_SP_ADDR \ + (CONFIG_SYS_SDRAM_BASE + 0x1000 - GENERATED_GBL_DATA_SIZE) + #endif /* __CONFIG_H */ diff --git a/include/configs/pdnb3.h b/include/configs/pdnb3.h index 33fa6ee..9acb018 100644 --- a/include/configs/pdnb3.h +++ b/include/configs/pdnb3.h @@ -117,6 +117,7 @@ #define CONFIG_SYS_MEMTEST_END 0x00800000 /* 4 ... 8 MB in DRAM */ #define CONFIG_SYS_LOAD_ADDR 0x00010000 /* default load address */ +#define CONFIG_IXP425_TIMER_CLK 66666666 #define CONFIG_SYS_HZ 1000 /* decrementer freq: 1 ms ticks */ /* valid baudrates */ #define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 } @@ -345,4 +346,9 @@ */ #define CONFIG_SYS_CACHELINE_SIZE 32 +/* additions for new relocation code, must be added to all boards */ +#define CONFIG_SYS_SDRAM_BASE 0x00000000 +#define CONFIG_SYS_INIT_SP_ADDR \ + (CONFIG_SYS_SDRAM_BASE + 0x1000 - GENERATED_GBL_DATA_SIZE) + #endif /* __CONFIG_H */ -- 1.7.2.3