From: Sumit Semwal <sumit.semwal@ti.com>
To: tomi.valkeinen@nokia.com, paul@pwsan.com, khilman@ti.com,
hvaibhav@ti.com, linux-omap@vger.kernel.org
Cc: Sumit Semwal <sumit.semwal@ti.com>
Subject: [PATCH v8 16/18] OMAP2,3: DSS2: replace printk with dev_dbg in init
Date: Fri, 21 Jan 2011 20:20:39 +0530 [thread overview]
Message-ID: <1295621441-16678-17-git-send-email-sumit.semwal@ti.com> (raw)
In-Reply-To: <1295621441-16678-1-git-send-email-sumit.semwal@ti.com>
This patch replaces printk's in the init/probe functions to dev_dbg
for boot time optimization.
Signed-off-by: Sumit Semwal <sumit.semwal@ti.com>
---
drivers/video/omap2/dss/dispc.c | 2 +-
drivers/video/omap2/dss/dsi.c | 2 +-
drivers/video/omap2/dss/rfbi.c | 2 +-
drivers/video/omap2/dss/venc.c | 2 +-
4 files changed, 4 insertions(+), 4 deletions(-)
diff --git a/drivers/video/omap2/dss/dispc.c b/drivers/video/omap2/dss/dispc.c
index abfed47..1c22cf0 100644
--- a/drivers/video/omap2/dss/dispc.c
+++ b/drivers/video/omap2/dss/dispc.c
@@ -3350,7 +3350,7 @@ static int omap_dispchw_probe(struct platform_device *pdev)
dispc_save_context();
rev = dispc_read_reg(DISPC_REVISION);
- printk(KERN_INFO "OMAP DISPC rev %d.%d\n",
+ dev_dbg(&pdev->dev, "OMAP DISPC rev %d.%d\n",
FLD_GET(rev, 7, 4), FLD_GET(rev, 3, 0));
enable_clocks(0);
diff --git a/drivers/video/omap2/dss/dsi.c b/drivers/video/omap2/dss/dsi.c
index d854137..39a1c04 100644
--- a/drivers/video/omap2/dss/dsi.c
+++ b/drivers/video/omap2/dss/dsi.c
@@ -3300,7 +3300,7 @@ static int dsi_init(struct platform_device *pdev)
enable_clocks(1);
rev = dsi_read_reg(DSI_REVISION);
- printk(KERN_INFO "OMAP DSI rev %d.%d\n",
+ dev_dbg(&pdev->dev, "OMAP DSI rev %d.%d\n",
FLD_GET(rev, 7, 4), FLD_GET(rev, 3, 0));
enable_clocks(0);
diff --git a/drivers/video/omap2/dss/rfbi.c b/drivers/video/omap2/dss/rfbi.c
index a64e119..93b13c5 100644
--- a/drivers/video/omap2/dss/rfbi.c
+++ b/drivers/video/omap2/dss/rfbi.c
@@ -1046,7 +1046,7 @@ static int omap_rfbihw_probe(struct platform_device *pdev)
rfbi_write_reg(RFBI_SYSCONFIG, l);
rev = rfbi_read_reg(RFBI_REVISION);
- printk(KERN_INFO "OMAP RFBI rev %d.%d\n",
+ dev_dbg(&pdev->dev, "OMAP RFBI rev %d.%d\n",
FLD_GET(rev, 7, 4), FLD_GET(rev, 3, 0));
rfbi_enable_clocks(0);
diff --git a/drivers/video/omap2/dss/venc.c b/drivers/video/omap2/dss/venc.c
index 935ae8e..3db9061 100644
--- a/drivers/video/omap2/dss/venc.c
+++ b/drivers/video/omap2/dss/venc.c
@@ -739,7 +739,7 @@ static int omap_venchw_probe(struct platform_device *pdev)
venc_enable_clocks(1);
rev_id = (u8)(venc_read_reg(VENC_REV_ID) & 0xff);
- printk(KERN_INFO "OMAP VENC rev %d\n", rev_id);
+ dev_dbg(&pdev->dev, "OMAP VENC rev %d\n", rev_id);
venc_enable_clocks(0);
--
1.7.1
next prev parent reply other threads:[~2011-01-21 14:52 UTC|newest]
Thread overview: 21+ messages / expand[flat|nested] mbox.gz Atom feed top
2011-01-21 14:50 [PATCH v8 00/18] OMAP2,3: hwmod DSS Adaptation Sumit Semwal
2011-01-21 14:50 ` [PATCH v8 01/18] OMAP2,3: DSS2: remove forced clk-disable from omap_dss_remove Sumit Semwal
2011-01-21 14:50 ` [PATCH v8 02/18] OMAP2420: hwmod data: add DSS DISPC RFBI VENC Sumit Semwal
2011-01-21 14:50 ` [PATCH v8 03/18] OMAP2430: " Sumit Semwal
2011-01-21 14:50 ` [PATCH v8 04/18] OMAP3: hwmod data: add DSS DISPC RFBI DSI VENC Sumit Semwal
2011-01-21 14:50 ` [PATCH v8 05/18] OMAP2,3 DSS2 Change driver name to omap_display Sumit Semwal
2011-01-21 14:50 ` [PATCH v8 06/18] OMAP2,3 DSS2 Use Regulator init with driver name Sumit Semwal
2011-01-21 14:50 ` [PATCH v8 07/18] OMAP2,3: DSS2: Create new file display.c for central dss driver registration Sumit Semwal
2011-01-21 14:50 ` [PATCH v8 08/18] OMAP2,3: DSS2: board files: replace platform_device_register with omap_display_init() Sumit Semwal
2011-01-21 14:50 ` [PATCH v8 09/18] OMAP2,3: DSS2: Build omap_device for each DSS HWIP Sumit Semwal
2011-01-21 14:50 ` [PATCH v8 10/18] OMAP2,3: DSS2: DSS: create platform_driver, move init,exit to driver Sumit Semwal
2011-01-21 14:50 ` [PATCH v8 11/18] OMAP2,3: DSS2: Move clocks from core driver to dss driver Sumit Semwal
2011-01-21 14:50 ` [PATCH v8 12/18] OMAP2,3: DSS2: RFBI: create platform_driver, move init,exit to driver Sumit Semwal
2011-01-21 14:50 ` [PATCH v8 13/18] OMAP2,3: DSS2: DISPC: " Sumit Semwal
2011-01-21 14:50 ` [PATCH v8 14/18] OMAP2,3: DSS2: VENC: " Sumit Semwal
2011-01-21 14:50 ` [PATCH v8 15/18] OMAP2,3: DSS2: DSI: " Sumit Semwal
2011-01-21 14:50 ` Sumit Semwal [this message]
2011-01-21 14:50 ` [PATCH v8 17/18] OMAP2,3: DSS2: Use platform device to get baseaddr Sumit Semwal
2011-01-21 14:50 ` [PATCH v8 18/18] OMAP2,3: DSS2: Get DSS IRQ from platform device Sumit Semwal
2011-01-21 16:35 ` [PATCH v8 00/18] OMAP2,3: hwmod DSS Adaptation Kevin Hilman
2011-01-22 5:32 ` Semwal, Sumit
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1295621441-16678-17-git-send-email-sumit.semwal@ti.com \
--to=sumit.semwal@ti.com \
--cc=hvaibhav@ti.com \
--cc=khilman@ti.com \
--cc=linux-omap@vger.kernel.org \
--cc=paul@pwsan.com \
--cc=tomi.valkeinen@nokia.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.