[U-Boot] [PATCH V6 5/5] Pantheon: Add Board Support for Marvell dkb board

[Lei Wen <leiwen@marvell.com>]

DKB is a Development Board for PANTHEON TD/TTC(pxa920/pxa910) with
* Processor upto 806Mhz
* LPDDR1/2
* x8/x16 SLC/MLC NAND
* Footprints for eMMC & MMC x8 card

With Peripherals:
* Parallel LCD I/F
* Audio codecs (88PM8607)
* MIPI CSI-2 camera
* Marvell 88W8787 802.11n/BT module
* Marvell 2G/3G RF
* Dual analog mics & speakers, headset jack, LED, ambient
* USB2.0 HS host, OTG (mini AB)
* GPIO, GPIO expander with DIP switches for easier selection
* UART serial over USB, CIR

This patch adds basic board support with DRAM and UART functionality

Signed-off-by: Lei Wen <leiwen@marvell.com>
---
V2:

V3:
Fix copyright claim year.

V4:
Add change log to each patch.

V5:
Remove additional CONFIG_SYS_NS16550_COM1 definition in dkb.h

V6:
Rebase patch on latest u-boot-marvell.git.
And fix a build warning.

 MAINTAINERS                |    4 +++
 board/Marvell/dkb/Makefile |   51 ++++++++++++++++++++++++++++++++++++
 board/Marvell/dkb/dkb.c    |   54 ++++++++++++++++++++++++++++++++++++++
 boards.cfg                 |    1 +
 include/configs/dkb.h      |   62 ++++++++++++++++++++++++++++++++++++++++++++
 5 files changed, 172 insertions(+), 0 deletions(-)
 create mode 100644 board/Marvell/dkb/Makefile
 create mode 100644 board/Marvell/dkb/dkb.c
 create mode 100644 include/configs/dkb.h

diff --git a/MAINTAINERS b/MAINTAINERS
index d92ff8d..36e2516 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -850,6 +850,10 @@ Prafulla Wadaskar <prafulla@marvell.com>
 	rd6281a		ARM926EJS (Kirkwood SoC)
 	sheevaplug	ARM926EJS (Kirkwood SoC)
 
+Lei Wen <leiwen@marvell.com>
+
+	dkb		ARM926EJS (PANTHEON 88AP920 SOC)
+
 Matthias Weisser <weisserm@arcor.de>
 
 	jadecpu		ARM926EJS (MB86R01 SoC)
diff --git a/board/Marvell/dkb/Makefile b/board/Marvell/dkb/Makefile
new file mode 100644
index 0000000..8835f8e
--- /dev/null
+++ b/board/Marvell/dkb/Makefile
@@ -0,0 +1,51 @@
+#
+# (C) Copyright 2010
+# Marvell Semiconductor <www.marvell.com>
+# Written-by: Lei Wen <leiwen@marvell.com>
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
+# MA 02110-1301 USA
+#
+
+include $(TOPDIR)/config.mk
+
+LIB     = $(obj)lib$(BOARD).o
+
+COBJS	:= dkb.o
+
+SRCS	:= $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS	:= $(addprefix $(obj),$(COBJS))
+SOBJS	:= $(addprefix $(obj),$(SOBJS))
+
+$(LIB):	$(obj).depend $(OBJS) $(SOBJS)
+	$(AR) $(ARFLAGS) $@ $(OBJS) $(SOBJS)
+
+clean:
+	rm -f $(SOBJS) $(OBJS)
+
+distclean:	clean
+	rm -f $(LIB) core *.bak .depend
+
+#########################################################################
+
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
+
+sinclude $(obj).depend
+
+#########################################################################
diff --git a/board/Marvell/dkb/dkb.c b/board/Marvell/dkb/dkb.c
new file mode 100644
index 0000000..95a3982
--- /dev/null
+++ b/board/Marvell/dkb/dkb.c
@@ -0,0 +1,54 @@
+/*
+ * (C) Copyright 2010
+ * Marvell Semiconductor <www.marvell.com>
+ * Written-by: Lei Wen <leiwen@marvell.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
+ * MA 02110-1301 USA
+ */
+
+#include <common.h>
+#include <mvmfp.h>
+#include <asm/arch/mfp.h>
+#include <asm/arch/cpu.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+int board_early_init_f(void)
+{
+	u32 mfp_cfg[] = {
+		/* Enable Console on UART2 */
+		MFP47_UART2_RXD,
+		MFP48_UART2_TXD,
+
+		MFP_EOC		/*End of configureation*/
+	};
+	/* configure MFP's */
+	mfp_config(mfp_cfg);
+
+	return 0;
+}
+
+int board_init(void)
+{
+	/* arch number of Board */
+	gd->bd->bi_arch_number = MACH_TYPE_TTC_DKB;
+	/* adress of boot parameters */
+	gd->bd->bi_boot_params = panth_sdram_base(0) + 0x100;
+	return 0;
+}
diff --git a/boards.cfg b/boards.cfg
index 350f287..7e1e283 100644
--- a/boards.cfg
+++ b/boards.cfg
@@ -104,6 +104,7 @@ imx27lite                    arm         arm926ejs   imx27lite           logicpd
 magnesium                    arm         arm926ejs   imx27lite           logicpd        mx27
 omap5912osk                  arm         arm926ejs   -                   ti             omap
 edminiv2                     arm         arm926ejs   -                   LaCie          orion5x
+dkb			     arm         arm926ejs   -                   Marvell        pantheon
 ca9x4_ct_vxp                 arm         armv7       vexpress            armltd
 mx51evk                      arm         armv7       mx51evk             freescale      mx5
 mx53evk                      arm         armv7       mx53evk             freescale      mx5
diff --git a/include/configs/dkb.h b/include/configs/dkb.h
new file mode 100644
index 0000000..089805e
--- /dev/null
+++ b/include/configs/dkb.h
@@ -0,0 +1,62 @@
+/*
+ * (C) Copyright 2010
+ * Marvell Semiconductor <www.marvell.com>
+ * Written-by: Lei Wen <leiwen@marvell.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
+ * MA 02110-1301 USA
+ */
+
+#ifndef __CONFIG_DKB_H
+#define __CONFIG_DKB_H
+
+/*
+ * Version number information
+ */
+#define CONFIG_IDENT_STRING	"\nMarvell-TTC DKB"
+
+/*
+ * High Level Configuration Options
+ */
+#define CONFIG_SHEEVA_88SV331xV5	1	/* CPU Core subversion */
+#define CONFIG_PANTHEON			1	/* SOC Family Name */
+#define CONFIG_MACH_TTC_DKB		1	/* Machine type */
+#define CONFIG_SKIP_LOWLEVEL_INIT	/* disable board lowlevel_init */
+
+/*
+ * Commands configuration
+ */
+#define CONFIG_SYS_NO_FLASH		/* Declare no flash (NOR/SPI) */
+#include <config_cmd_default.h>
+#define CONFIG_CMD_AUTOSCRIPT
+#undef CONFIG_CMD_NET
+#undef CONFIG_CMD_NFS
+/*
+ * mv-common.h should be defined after CMD configs since it used them
+ * to enable certain macros
+ */
+#include "mv-common.h"
+
+#undef CONFIG_ARCH_MISC_INIT
+/*
+ * Environment variables configurations
+ */
+#define CONFIG_ENV_IS_NOWHERE	1	/* if env in SDRAM */
+#define CONFIG_ENV_SIZE	0x20000	/* 64k */
+
+#endif	/* __CONFIG_DKB_H */
-- 
1.7.0.4