All of lore.kernel.org
 help / color / mirror / Atom feed
From: Eric Dumazet <eric.dumazet@gmail.com>
To: David Miller <davem@davemloft.net>
Cc: netdev@vger.kernel.org
Subject: Re: [RFC PATCH] net: Implement read-only protection and COW'ing of metrics.
Date: Thu, 27 Jan 2011 11:01:51 +0100	[thread overview]
Message-ID: <1296122511.3027.11.camel@edumazet-laptop> (raw)
In-Reply-To: <20110126.152538.260074157.davem@davemloft.net>

Le mercredi 26 janvier 2011 à 15:25 -0800, David Miller a écrit :
> Eric, thanks again for your feedback.  I've taken a stab at fixing the
> various races, in particular the one you discovered about metrics
> sharing and how this interacts with fib_info releases.
> 
> What I've choosen to do is two-fold:
> 
> 1) Update ->_metrics atomically with cmpxchg once a route becomes publicly
>    visible.
> 
> 2) Remember and grab a reference to the fib_info for shared read-only
>    metrics in rt->fi, then release it once the metrics regerence goes
>    away.
> 
> It sounds expensive but hear me out :-)
> 
> First of all, at rt_set_nexthop() time, the atomic we use to grab a
> ref to the fib_info is replacing a 60-byte memcpy() into the dst
> metrics.
> 
> Next, the ->_metrics atomic to un-COW the metrics at destroy time
> might in fact be overkill.  Especially once writable metrics live in
> the inetpeer cache (that's the next set of patches after this one).
> 
> Finally, once this change is stabilized we can be a lot smarter about
> what we do at the time an entry is created.  For example, when a route
> is looked up for a TCP socket, we essentially know we are going to COW
> the route %99.99999 of the time.  So we can pass a hint into TCP's
> route lookups in the flow flags field telling it to pre-COW the route.
> 
> TCP pre-COW'ing of metrics will thus save several atomics.
> 
> Anyways, here is the patch, it is only build tested at this point, but
> I wanted to get feedback from you about the basic gist of things
> as soon as possible.
> 
> Thanks!
> 

Thanks David, I read this (I am a bit busy preparing my travel to
Reunion/Maurice islands). This looks pretty nice. I have one comment :

>  
> +u32 *dst_cow_metrics_generic(struct dst_entry *dst, unsigned long old)
> +{
> +	u32 *p = kmalloc(sizeof(u32) * RTAX_MAX, GFP_ATOMIC);
> +
> +	if (p) {
> +		u32 *old_p = __DST_METRICS_PTR(old);
> +		unsigned long prev, new;
> +
> +		memcpy(p, old_p, sizeof(u32) * RTAX_MAX);
> +
> +		new = (unsigned long) p;
> +		prev = cmpxchg(&dst->_metrics, old, new);
> +
> +		if (prev != old) {
> +			kfree(p);
> +			p = __DST_METRICS_PTR(prev);
> +			if (prev & DST_METRICS_READ_ONLY)
> +				p = NULL;
> +		}
> +	}
> +	return p;
> +}
> +EXPORT_SYMBOL(dst_cow_metrics_generic);
> +
...

> diff --git a/net/ipv4/route.c b/net/ipv4/route.c
> index 3e5b7cc..7fc6301 100644
> --- a/net/ipv4/route.c
> +++ b/net/ipv4/route.c
> @@ -152,6 +152,36 @@ static void ipv4_dst_ifdown(struct dst_entry *dst, struct net_device *dev,
>  {
>  }
>  
> +static u32 *ipv4_cow_metrics(struct dst_entry *dst, unsigned long old)
> +{
> +	u32 *p = kmalloc(sizeof(u32) * RTAX_MAX, GFP_ATOMIC);
> +
> +	if (p) {
> +		u32 *old_p = __DST_METRICS_PTR(old);
> +		unsigned long prev, new;
> +
> +		memcpy(p, old_p, sizeof(u32) * RTAX_MAX);
> +
> +		new = (unsigned long) p;
> +		prev = cmpxchg(&dst->_metrics, old, new);
> +
> +		if (prev != old) {
> +			kfree(p);
> +			p = __DST_METRICS_PTR(prev);
> +			if (prev & DST_METRICS_READ_ONLY)
> +				p = NULL;
> +		} else {

Hmm, I first asked myself why you dont use dst_cow_metrics_generic() to
perform the generic allocation, but saw following :

> +			struct rtable *rt = (struct rtable *) dst;
> +

Since you use cmpxchg() to permut the dst->_metrics, I feel this rt->fi
needs some protection as well. Maybe store fi pointer inside the metrics
instead of dst, or else you need a spinlock to perform the whole
transaction (change dst->_metrics & rt->fi) ?

> +			if (rt->fi) {
> +				fib_info_put(rt->fi);
> +				rt->fi = NULL;
> +			}
> +		}
> +	}
> +	return p;
> +}
> +



  parent reply	other threads:[~2011-01-27 10:01 UTC|newest]

Thread overview: 10+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2010-12-15 21:21 [RFC PATCH] net: Implement read-only protection and COW'ing of metrics David Miller
2010-12-16 19:55 ` Eric Dumazet
2010-12-16 19:59   ` David Miller
2010-12-16 21:21     ` David Miller
2011-01-26 23:25     ` David Miller
2011-01-26 23:31       ` David Miller
2011-01-27 10:01       ` Eric Dumazet [this message]
2011-01-27 10:20         ` Eric Dumazet
2011-01-27 20:29           ` David Miller
2011-01-27 20:28         ` David Miller

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1296122511.3027.11.camel@edumazet-laptop \
    --to=eric.dumazet@gmail.com \
    --cc=davem@davemloft.net \
    --cc=netdev@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.