From: Jes.Sorensen@redhat.com
To: qemu-devel@nongnu.org
Cc: jan.kiszka@siemens.com, peter.maydell@linaro.org
Subject: [Qemu-devel] [PATCH 7/7] Make VNC support optional
Date: Tue, 15 Mar 2011 16:45:29 +0100 [thread overview]
Message-ID: <1300203929-25823-8-git-send-email-Jes.Sorensen@redhat.com> (raw)
In-Reply-To: <1300203929-25823-1-git-send-email-Jes.Sorensen@redhat.com>
From: Jes Sorensen <Jes.Sorensen@redhat.com>
Per default VNC is enabled.
Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
---
Makefile.objs | 19 ++++++++++---------
configure | 37 +++++++++++++++++++++++++------------
console.h | 26 ++++++++++++++++++++++++--
monitor.c | 22 ++++++++++------------
qerror.h | 3 +++
ui/vnc.c | 14 ++++++++++----
vl.c | 21 +++++++++++++++++----
7 files changed, 99 insertions(+), 43 deletions(-)
diff --git a/Makefile.objs b/Makefile.objs
index a52f42f..9796d12 100644
--- a/Makefile.objs
+++ b/Makefile.objs
@@ -127,19 +127,20 @@ common-obj-y += $(addprefix audio/, $(audio-obj-y))
ui-obj-y += keymaps.o
ui-obj-$(CONFIG_SDL) += sdl.o sdl_zoom.o x_keymap.o
ui-obj-$(CONFIG_CURSES) += curses.o
-ui-obj-y += vnc.o d3des.o
-ui-obj-y += vnc-enc-zlib.o vnc-enc-hextile.o
-ui-obj-y += vnc-enc-tight.o vnc-palette.o
-ui-obj-y += vnc-enc-zrle.o
-ui-obj-$(CONFIG_VNC_TLS) += vnc-tls.o vnc-auth-vencrypt.o
-ui-obj-$(CONFIG_VNC_SASL) += vnc-auth-sasl.o
-ui-obj-$(CONFIG_COCOA) += cocoa.o
+vnc-obj-y += vnc.o d3des.o
+vnc-obj-y += vnc-enc-zlib.o vnc-enc-hextile.o
+vnc-obj-y += vnc-enc-tight.o vnc-palette.o
+vnc-obj-y += vnc-enc-zrle.o
+vnc-obj-$(CONFIG_VNC_TLS) += vnc-tls.o vnc-auth-vencrypt.o
+vnc-obj-$(CONFIG_VNC_SASL) += vnc-auth-sasl.o
+vnc-obj-$(CONFIG_COCOA) += cocoa.o
ifdef CONFIG_VNC_THREAD
-ui-obj-y += vnc-jobs-async.o
+vnc-obj-y += vnc-jobs-async.o
else
-ui-obj-y += vnc-jobs-sync.o
+vnc-obj-y += vnc-jobs-sync.o
endif
common-obj-y += $(addprefix ui/, $(ui-obj-y))
+common-obj-$(CONFIG_VNC) += $(addprefix ui/, $(vnc-obj-y))
common-obj-y += iov.o acl.o
common-obj-$(CONFIG_POSIX) += qemu-thread-posix.o compatfd.o
diff --git a/configure b/configure
index a166de0..abd3317 100755
--- a/configure
+++ b/configure
@@ -117,6 +117,7 @@ kvm=""
kvm_para=""
nptl=""
sdl=""
+vnc="yes"
sparse="no"
uuid=""
vde=""
@@ -539,6 +540,10 @@ for opt do
;;
--enable-sdl) sdl="yes"
;;
+ --disable-vnc) vnc="no"
+ ;;
+ --enable-vnc) vnc="yes"
+ ;;
--fmod-lib=*) fmod_lib="$optarg"
;;
--fmod-inc=*) fmod_inc="$optarg"
@@ -836,6 +841,8 @@ echo " --disable-strip disable stripping binaries"
echo " --disable-werror disable compilation abort on warning"
echo " --disable-sdl disable SDL"
echo " --enable-sdl enable SDL"
+echo " --disable-vnc disable VNC"
+echo " --enable-vnc enable VNC"
echo " --enable-cocoa enable COCOA (Mac OS X only)"
echo " --audio-drv-list=LIST set audio drivers list:"
echo " Available drivers: $audio_possible_drivers"
@@ -1273,7 +1280,7 @@ fi
##########################################
# VNC TLS detection
-if test "$vnc_tls" != "no" ; then
+if test "$vnc" = "yes" -a "$vnc_tls" != "no" ; then
cat > $TMPC <<EOF
#include <gnutls/gnutls.h>
int main(void) { gnutls_session_t s; gnutls_init(&s, GNUTLS_SERVER); return 0; }
@@ -1293,7 +1300,7 @@ fi
##########################################
# VNC SASL detection
-if test "$vnc_sasl" != "no" ; then
+if test "$vnc" = "yes" -a "$vnc_sasl" != "no" ; then
cat > $TMPC <<EOF
#include <sasl/sasl.h>
#include <stdio.h>
@@ -1315,7 +1322,7 @@ fi
##########################################
# VNC JPEG detection
-if test "$vnc_jpeg" != "no" ; then
+if test "$vnc" = "yes" -a "$vnc_jpeg" != "no" ; then
cat > $TMPC <<EOF
#include <stdio.h>
#include <jpeglib.h>
@@ -1336,7 +1343,7 @@ fi
##########################################
# VNC PNG detection
-if test "$vnc_png" != "no" ; then
+if test "$vnc" = "yes" -a "$vnc_png" != "no" ; then
cat > $TMPC <<EOF
//#include <stdio.h>
#include <png.h>
@@ -2495,11 +2502,14 @@ echo "Audio drivers $audio_drv_list"
echo "Extra audio cards $audio_card_list"
echo "Block whitelist $block_drv_whitelist"
echo "Mixer emulation $mixemu"
-echo "VNC TLS support $vnc_tls"
-echo "VNC SASL support $vnc_sasl"
-echo "VNC JPEG support $vnc_jpeg"
-echo "VNC PNG support $vnc_png"
-echo "VNC thread $vnc_thread"
+echo "VNC support $vnc"
+if test "$vnc" = "yes" ; then
+ echo "VNC TLS support $vnc_tls"
+ echo "VNC SASL support $vnc_sasl"
+ echo "VNC JPEG support $vnc_jpeg"
+ echo "VNC PNG support $vnc_png"
+ echo "VNC thread $vnc_thread"
+fi
if test -n "$sparc_cpu"; then
echo "Target Sparc Arch $sparc_cpu"
fi
@@ -2649,6 +2659,9 @@ echo "CONFIG_BDRV_WHITELIST=$block_drv_whitelist" >> $config_host_mak
if test "$mixemu" = "yes" ; then
echo "CONFIG_MIXEMU=y" >> $config_host_mak
fi
+if test "$vnc" = "yes" ; then
+ echo "CONFIG_VNC=y" >> $config_host_mak
+fi
if test "$vnc_tls" = "yes" ; then
echo "CONFIG_VNC_TLS=y" >> $config_host_mak
echo "VNC_TLS_CFLAGS=$vnc_tls_cflags" >> $config_host_mak
@@ -2657,15 +2670,15 @@ if test "$vnc_sasl" = "yes" ; then
echo "CONFIG_VNC_SASL=y" >> $config_host_mak
echo "VNC_SASL_CFLAGS=$vnc_sasl_cflags" >> $config_host_mak
fi
-if test "$vnc_jpeg" != "no" ; then
+if test "$vnc_jpeg" = "yes" ; then
echo "CONFIG_VNC_JPEG=y" >> $config_host_mak
echo "VNC_JPEG_CFLAGS=$vnc_jpeg_cflags" >> $config_host_mak
fi
-if test "$vnc_png" != "no" ; then
+if test "$vnc_png" = "yes" ; then
echo "CONFIG_VNC_PNG=y" >> $config_host_mak
echo "VNC_PNG_CFLAGS=$vnc_png_cflags" >> $config_host_mak
fi
-if test "$vnc_thread" != "no" ; then
+if test "$vnc_thread" = "yes" ; then
echo "CONFIG_VNC_THREAD=y" >> $config_host_mak
fi
if test "$fnmatch" = "yes" ; then
diff --git a/console.h b/console.h
index 711895e..64d1f09 100644
--- a/console.h
+++ b/console.h
@@ -4,6 +4,8 @@
#include "qemu-char.h"
#include "qdict.h"
#include "notify.h"
+#include "qerror.h"
+#include "monitor.h"
/* keyboard/mouse support */
@@ -370,12 +372,32 @@ void cocoa_display_init(DisplayState *ds, int full_screen);
void vnc_display_init(DisplayState *ds);
void vnc_display_close(DisplayState *ds);
int vnc_display_open(DisplayState *ds, const char *display);
-int vnc_display_password(DisplayState *ds, const char *password);
int vnc_display_disable_login(DisplayState *ds);
+char *vnc_display_local_addr(DisplayState *ds);
+#ifdef CONFIG_VNC
+int vnc_display_password(DisplayState *ds, const char *password);
int vnc_display_pw_expire(DisplayState *ds, time_t expires);
void do_info_vnc_print(Monitor *mon, const QObject *data);
void do_info_vnc(Monitor *mon, QObject **ret_data);
-char *vnc_display_local_addr(DisplayState *ds);
+#else
+static inline int vnc_display_password(DisplayState *ds, const char *password)
+{
+ qerror_report(QERR_FEATURE_DISABLED, "vnc");
+ return -ENODEV;
+}
+static inline int vnc_display_pw_expire(DisplayState *ds, time_t expires)
+{
+ qerror_report(QERR_FEATURE_DISABLED, "vnc");
+ return -ENODEV;
+};
+static inline void do_info_vnc(Monitor *mon, QObject **ret_data)
+{
+};
+static inline void do_info_vnc_print(Monitor *mon, const QObject *data)
+{
+ monitor_printf(mon, "VNC support disabled\n");
+};
+#endif
/* curses.c */
void curses_display_init(DisplayState *ds, int full_screen);
diff --git a/monitor.c b/monitor.c
index 22ae3bb..4a54c55 100644
--- a/monitor.c
+++ b/monitor.c
@@ -1016,6 +1016,7 @@ static int do_quit(Monitor *mon, const QDict *qdict, QObject **ret_data)
return 0;
}
+#ifdef CONFIG_VNC
static int change_vnc_password(const char *password)
{
if (!password || !password[0]) {
@@ -1062,6 +1063,13 @@ static int do_change_vnc(Monitor *mon, const char *target, const char *arg)
return 0;
}
+#else
+static int do_change_vnc(Monitor *mon, const char *target, const char *arg)
+{
+ qerror_report(QERR_FEATURE_DISABLED, "vnc");
+ return -ENODEV;
+}
+#endif
/**
* do_change(): Change a removable medium, or VNC configuration
@@ -1127,12 +1135,7 @@ static int set_password(Monitor *mon, const QDict *qdict, QObject **ret_data)
}
/* Note that setting an empty password will not disable login through
* this interface. */
- rc = vnc_display_password(NULL, password);
- if (rc != 0) {
- qerror_report(QERR_SET_PASSWD_FAILED);
- return -1;
- }
- return 0;
+ return vnc_display_password(NULL, password);
}
qerror_report(QERR_INVALID_PARAMETER, "protocol");
@@ -1171,12 +1174,7 @@ static int expire_password(Monitor *mon, const QDict *qdict, QObject **ret_data)
}
if (strcmp(protocol, "vnc") == 0) {
- rc = vnc_display_pw_expire(NULL, when);
- if (rc != 0) {
- qerror_report(QERR_SET_PASSWD_FAILED);
- return -1;
- }
- return 0;
+ return vnc_display_pw_expire(NULL, when);
}
qerror_report(QERR_INVALID_PARAMETER, "protocol");
diff --git a/qerror.h b/qerror.h
index f732d45..df61d2c 100644
--- a/qerror.h
+++ b/qerror.h
@@ -171,4 +171,7 @@ QError *qobject_to_qerror(const QObject *obj);
#define QERR_VNC_SERVER_FAILED \
"{ 'class': 'VNCServerFailed', 'data': { 'target': %s } }"
+#define QERR_FEATURE_DISABLED \
+ "{ 'class': 'FeatureDisabled', 'data': { 'name': %s } }"
+
#endif /* QERROR_H */
diff --git a/ui/vnc.c b/ui/vnc.c
index 34dc0cd..dd7a44a 100644
--- a/ui/vnc.c
+++ b/ui/vnc.c
@@ -2638,16 +2638,19 @@ int vnc_display_disable_login(DisplayState *ds)
int vnc_display_password(DisplayState *ds, const char *password)
{
+ int ret = 0;
VncDisplay *vs = ds ? (VncDisplay *)ds->opaque : vnc_display;
if (!vs) {
- return -1;
+ ret = -EINVAL;
+ goto out;
}
if (!password) {
/* This is not the intention of this interface but err on the side
of being safe */
- return vnc_display_disable_login(ds);
+ ret = vnc_display_disable_login(ds);
+ goto out;
}
if (vs->password) {
@@ -2656,8 +2659,11 @@ int vnc_display_password(DisplayState *ds, const char *password)
}
vs->password = qemu_strdup(password);
vs->auth = VNC_AUTH_VNC;
-
- return 0;
+out:
+ if (ret != 0) {
+ qerror_report(QERR_SET_PASSWD_FAILED);
+ }
+ return ret;
}
int vnc_display_pw_expire(DisplayState *ds, time_t expires)
diff --git a/vl.c b/vl.c
index 96ee883..fb82c2c 100644
--- a/vl.c
+++ b/vl.c
@@ -206,7 +206,9 @@ int smp_cpus = 1;
int max_cpus = 0;
int smp_cores = 1;
int smp_threads = 1;
+#ifdef CONFIG_VNC
const char *vnc_display;
+#endif
int acpi_enabled = 1;
int no_hpet = 0;
int fd_bootchk = 1;
@@ -2025,7 +2027,9 @@ int main(int argc, char **argv, char **envp)
int tb_size;
const char *pid_file = NULL;
const char *incoming = NULL;
+#ifdef CONFIG_VNC
int show_vnc_port = 0;
+#endif
int defconfig = 1;
const char *trace_file = NULL;
@@ -2683,9 +2687,14 @@ int main(int argc, char **argv, char **envp)
}
break;
case QEMU_OPTION_vnc:
+#ifdef CONFIG_VNC
display_remote++;
- vnc_display = optarg;
- break;
+ vnc_display = optarg;
+#else
+ fprintf(stderr, "VNC support is disabled\n");
+ exit(1);
+#endif
+ break;
case QEMU_OPTION_no_acpi:
acpi_enabled = 0;
break;
@@ -3139,12 +3148,14 @@ int main(int argc, char **argv, char **envp)
if (display_type == DT_DEFAULT && !display_remote) {
#if defined(CONFIG_SDL) || defined(CONFIG_COCOA)
display_type = DT_SDL;
-#else
+#elif defined(CONFIG_VNC)
vnc_display = "localhost:0,to=99";
show_vnc_port = 1;
+#else
+ display_type = DT_NONE;
#endif
}
-
+
/* init local displays */
switch (display_type) {
@@ -3168,6 +3179,7 @@ int main(int argc, char **argv, char **envp)
break;
}
+#ifdef CONFIG_VNC
/* init remote displays */
if (vnc_display) {
vnc_display_init(ds);
@@ -3178,6 +3190,7 @@ int main(int argc, char **argv, char **envp)
printf("VNC server running on `%s'\n", vnc_display_local_addr(ds));
}
}
+#endif
#ifdef CONFIG_SPICE
if (using_spice && !qxl_enabled) {
qemu_spice_display_init(ds);
--
1.7.4
next prev parent reply other threads:[~2011-03-15 15:46 UTC|newest]
Thread overview: 11+ messages / expand[flat|nested] mbox.gz Atom feed top
2011-03-15 15:45 [Qemu-devel] [PATCH v3 0/7] Introduce -display and make VNC optional Jes.Sorensen
2011-03-15 15:45 ` [Qemu-devel] [PATCH 1/7] Consolidate DisplaySurface allocation in qemu_alloc_display() Jes.Sorensen
2011-03-15 15:45 ` [Qemu-devel] [PATCH 2/7] Introduce -display argument Jes.Sorensen
2011-03-15 15:45 ` [Qemu-devel] [PATCH 3/7] Introduce -display none Jes.Sorensen
2011-03-15 15:45 ` [Qemu-devel] [PATCH 4/7] Add support for -display vnc Jes.Sorensen
2011-03-15 15:45 ` [Qemu-devel] [PATCH 5/7] error message if user specifies SDL cmd line option when SDL is disabled Jes.Sorensen
2011-03-15 15:45 ` [Qemu-devel] [PATCH 6/7] error message if user specifies curses on cmd line when curses " Jes.Sorensen
2011-03-15 15:45 ` Jes.Sorensen [this message]
-- strict thread matches above, loose matches on Subject: below --
2011-03-16 12:33 [Qemu-devel] [PATCH v5 0/7] Introduce -display and make VNC optional Jes.Sorensen
2011-03-16 12:33 ` [Qemu-devel] [PATCH 7/7] Make VNC support optional Jes.Sorensen
2011-03-16 11:00 [Qemu-devel] [PATCH v4 0/7] Introduce -display and make VNC optional Jes.Sorensen
2011-03-16 11:00 ` [Qemu-devel] [PATCH 7/7] Make VNC support optional Jes.Sorensen
2011-03-15 12:36 [Qemu-devel] [PATCH v2 0/7] Introduce -display and make VNC optional Jes.Sorensen
2011-03-15 12:36 ` [Qemu-devel] [PATCH 7/7] Make VNC support optional Jes.Sorensen
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1300203929-25823-8-git-send-email-Jes.Sorensen@redhat.com \
--to=jes.sorensen@redhat.com \
--cc=jan.kiszka@siemens.com \
--cc=peter.maydell@linaro.org \
--cc=qemu-devel@nongnu.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.