From mboxrd@z Thu Jan 1 00:00:00 1970 Return-path: Received: from mail-wy0-f174.google.com ([74.125.82.174]:39482 "EHLO mail-wy0-f174.google.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1750970Ab1DVTb6 (ORCPT ); Fri, 22 Apr 2011 15:31:58 -0400 Received: by wya21 with SMTP id 21so588167wya.19 for ; Fri, 22 Apr 2011 12:31:56 -0700 (PDT) From: Javier Lopez To: linux-wireless@vger.kernel.org Cc: j@w1.fi, linville@tuxdriver.com, javier@cozybit.com, Javier Lopez Subject: [PATCH v2] mac80211_hwsim driver support userspace frame tx/rx Date: Fri, 22 Apr 2011 21:31:43 +0200 Message-Id: <1303500703-24157-1-git-send-email-jlopex@gmail.com> In-Reply-To: References: Sender: linux-wireless-owner@vger.kernel.org List-ID: This is an updated patch that solve the issues found in the previous patch, it adds frame exchange capabilities with userspace to mac80211_hwsim driver. Allowing user space applications to decide if a frame should be dropped or not. Frame exchange between kernel and userspace is done through a generic netlink communication protocol, a new family called HWSIM is proposed in order to communicate with userspace applications. This family contains three basic commands; HWSIM_CMD_REGISTER which is used to register a userspace application with this driver, HWSIM_CMD_FRAME to exchange frames from kernel to user and vice-versa, and finally HWSIM_CMD_TX_INFO_FRAME which returns to the kernel all the information about a frame transmission over the medium, number of tries, rates, ack signal and so on. How it works: Once the driver is loaded, it registers the HWSIM generic netlink family. In the absence of a daemon the driver implements a perfect wireless medium in the kernel as it did in the past. Once a daemon a registers itself via HWSIM_CMD_REGISTER, the kernel module stores the daemon PID and from this moment all frames will be sent to the daemon. The userspace application will be in charge of process/forward all frames broadcast by any radio using the mac80211_hwsim driver. If the user application is stopped the module will switch back to in-kernel perfect channel simulation. This transmission of kernel to user space is done through the HWSIM_CMD_FRAME command. The userspace application once sends the HWSIM_CMD_REGISTER, waits for incoming messages from kernel, for each HWSIM_CMD_FRAME command received, the application will try to broadcast it, cloning the frame to all known mac80211_hwsim radios. The daemon may decide to send or drop this frame. In the case of sending a frame back to kernel, the daemon will create a new HWSIM_CMD_FRAME command, fill the necessary attributes and send it back. In the case of a frame drop, the example userspace daemon retransmits frames according to the ieee80211_tx_info values received from the kernel. After each frame complete transmission a HWSIM_CMD_TX_INFO command may be sent to the kernel to inform about the tx status, this command contains information such as number of tries, rates, ack'ed or not ack'ed, ack_signal, etc. If you want to test the actual implementation of the wireless medium daemon (wmediumd) and test this patch, just get it from GitHub: - Last version tarball: https://github.com/jlopex/cozybit/tarball/master - Or visiting my github tree: https://github.com/jlopex/cozybit/tree Signed-off-by: Javier Lopez --- drivers/net/wireless/mac80211_hwsim.c | 388 ++++++++++++++++++++++++++++++++- drivers/net/wireless/mac80211_hwsim.h | 121 ++++++++++ 2 files changed, 503 insertions(+), 6 deletions(-) create mode 100644 drivers/net/wireless/mac80211_hwsim.h diff --git a/drivers/net/wireless/mac80211_hwsim.c b/drivers/net/wireless/mac80211_hwsim.c index f4f4257..abb9444 100644 --- a/drivers/net/wireless/mac80211_hwsim.c +++ b/drivers/net/wireless/mac80211_hwsim.c @@ -1,6 +1,7 @@ /* * mac80211_hwsim - software simulator of 802.11 radio(s) for mac80211 * Copyright (c) 2008, Jouni Malinen + * Copyright (c) 2011, Javier Lopez * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as @@ -25,11 +26,15 @@ #include #include #include +#include +#include "mac80211_hwsim.h" MODULE_AUTHOR("Jouni Malinen"); MODULE_DESCRIPTION("Software simulator of 802.11 radio(s) for mac80211"); MODULE_LICENSE("GPL"); +static atomic_t wmediumd_pid; + static int radios = 2; module_param(radios, int, 0444); MODULE_PARM_DESC(radios, "Number of simulated radios"); @@ -479,20 +484,95 @@ static bool mac80211_hwsim_addr_match(struct mac80211_hwsim_data *data, } +static int hwsim_frame_send_nl(struct mac_address *src, + struct sk_buff *my_skb, int _pid) +{ + + struct ieee80211_tx_info *txi; + struct sk_buff *skb; + void *msg_head; + int rc; + + skb = genlmsg_new(NLMSG_GOODSIZE, GFP_ATOMIC); + if (skb == NULL) { + printk(KERN_DEBUG "mac80211_hwsim: problem allocating skb\n"); + goto out; + } + + msg_head = genlmsg_put(skb, 0, 0, &hwsim_genl_family, 0, + HWSIM_CMD_FRAME); + if (msg_head == NULL) { + printk(KERN_DEBUG "mac80211_hwsim: problem with msg_head\n"); + goto out; + } + + rc = nla_put(skb, HWSIM_ATTR_ADDR_TRANSMITTER, + sizeof(struct mac_address), src); + /* We get the skb->data */ + rc = nla_put(skb, HWSIM_ATTR_FRAME, my_skb->len, my_skb->data); + /* We get a copy of the control buffer for this tx*/ + rc = nla_put(skb, HWSIM_ATTR_CB_SKB, sizeof(my_skb->cb), + my_skb->cb); + + txi = IEEE80211_SKB_CB(my_skb); + + /* We get the flags for this transmission, wmediumd maybe + changes its behaviour depending on the flags */ + rc = nla_put_u32(skb, HWSIM_ATTR_FLAGS, txi->flags); + /* We get the tx control (rate and retries) info*/ + rc = nla_put(skb, HWSIM_ATTR_TX_INFO, + sizeof(struct ieee80211_tx_rate)*IEEE80211_TX_MAX_RATES, + txi->control.rates); + + if (rc != 0) { + printk(KERN_DEBUG "mac80211_hwsim: " + "error filling msg payload\n"); + goto out; + } + + genlmsg_end(skb, msg_head); + rc = genlmsg_unicast(&init_net, skb, _pid); + if (rc != 0) { + printk(KERN_DEBUG "mac80211_hwsim: wmediumd not responding " + "at PID:%d, switching to no wmediumd mode.\n", _pid); + atomic_set(&wmediumd_pid, 0); + } + + return 0; + +out: + printk(KERN_DEBUG "mac80211_hwsim: error occured in %s\n", __func__); + return -1; +} + static bool mac80211_hwsim_tx_frame(struct ieee80211_hw *hw, struct sk_buff *skb) { struct mac80211_hwsim_data *data = hw->priv, *data2; - bool ack = false; struct ieee80211_hdr *hdr = (struct ieee80211_hdr *) skb->data; struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb); struct ieee80211_rx_status rx_status; + bool ack = false; + if (data->idle) { wiphy_debug(hw->wiphy, "Trying to TX when idle - reject\n"); return false; } + if (data->ps != PS_DISABLED) + hdr->frame_control |= cpu_to_le16(IEEE80211_FCTL_PM); + + /* wmediumd mode */ + if (atomic_read(&wmediumd_pid)) { + hwsim_frame_send_nl((struct mac_address *) + &data->addresses[1].addr, skb, + atomic_read(&wmediumd_pid)); + return true; + } + + /* NO wmediumd, normal mac80211_hwsim behaviour*/ + memset(&rx_status, 0, sizeof(rx_status)); /* TODO: set mactime */ rx_status.freq = data->channel->center_freq; @@ -501,9 +581,6 @@ static bool mac80211_hwsim_tx_frame(struct ieee80211_hw *hw, /* TODO: simulate real signal strength (and optional packet loss) */ rx_status.signal = data->power_level - 50; - if (data->ps != PS_DISABLED) - hdr->frame_control |= cpu_to_le16(IEEE80211_FCTL_PM); - /* release the skb's source info */ skb_orphan(skb); skb_dst_drop(skb); @@ -530,9 +607,10 @@ static bool mac80211_hwsim_tx_frame(struct ieee80211_hw *hw, if (nskb == NULL) continue; + memcpy(IEEE80211_SKB_RXCB(nskb), &rx_status, sizeof(rx_status)); + if (mac80211_hwsim_addr_match(data2, hdr->addr1)) ack = true; - memcpy(IEEE80211_SKB_RXCB(nskb), &rx_status, sizeof(rx_status)); ieee80211_rx_irqsafe(data2->hw, nskb); } spin_unlock(&hwsim_radio_lock); @@ -540,12 +618,12 @@ static bool mac80211_hwsim_tx_frame(struct ieee80211_hw *hw, return ack; } - static void mac80211_hwsim_tx(struct ieee80211_hw *hw, struct sk_buff *skb) { bool ack; struct ieee80211_tx_info *txi; + mac80211_hwsim_monitor_rx(hw, skb); if (skb->len < 10) { @@ -554,6 +632,13 @@ static void mac80211_hwsim_tx(struct ieee80211_hw *hw, struct sk_buff *skb) return; } + /* wmediumd mode*/ + if (atomic_read(&wmediumd_pid)) { + mac80211_hwsim_tx_frame(hw, skb); + return; + } + + /* NO wmediumd, normal mac80211_hwsim behaviour*/ ack = mac80211_hwsim_tx_frame(hw, skb); if (ack && skb->len >= 16) { struct ieee80211_hdr *hdr = (struct ieee80211_hdr *) skb->data; @@ -1244,6 +1329,283 @@ static int hwsim_fops_group_write(void *dat, u64 val) return 0; } + +struct mac80211_hwsim_data *get_hwsim_data_ref_from_addr( + struct mac_address *addr) +{ + struct mac80211_hwsim_data *data; + bool _found = false; + + spin_lock(&hwsim_radio_lock); + list_for_each_entry(data, &hwsim_radios, list) { + if (memcmp(data->addresses[1].addr, addr, + sizeof(struct mac_address)) == 0) { + _found = true; + break; + } + } + spin_unlock(&hwsim_radio_lock); + + if (!_found) { + printk(KERN_DEBUG "mac80211_hwsim: invalid radio ID\n"); + return NULL; + } + + return data; + + +} + +static int hwsim_tx_info_frame_received_nl(struct sk_buff *skb_2, + struct genl_info *info) +{ + + struct ieee80211_hdr *hdr; + struct mac80211_hwsim_data *data2; + struct ieee80211_tx_info *txi; + struct ieee80211_tx_rate *tx_attempts; + char *cb; + + int i; + + struct mac_address *dst = (struct mac_address *)nla_data( + info->attrs[HWSIM_ATTR_ADDR_TRANSMITTER]); + int frame_data_len = nla_len(info->attrs[HWSIM_ATTR_FRAME]); + char *frame_data = (char *)nla_data(info->attrs[HWSIM_ATTR_FRAME]); + int flags = nla_get_u32(info->attrs[HWSIM_ATTR_FLAGS]); + + /* Allocate new skb here */ + struct sk_buff *skb = alloc_skb(IEEE80211_MAX_DATA_LEN, GFP_KERNEL); + if (skb == NULL) + goto out; + + if (frame_data_len <= IEEE80211_MAX_DATA_LEN) { + /* Copy the data */ + memcpy(skb_put(skb, frame_data_len), frame_data, + frame_data_len); + } else + goto out; + + data2 = get_hwsim_data_ref_from_addr(dst); + + if (data2 == NULL) + goto out; + + /*Tx info received because the frame was broadcasted on user space, + so we get all the necessary info: tx attempts and skb control buffer*/ + + tx_attempts = (struct ieee80211_tx_rate *)nla_data( + info->attrs[HWSIM_ATTR_TX_INFO]); + + if (tx_attempts == NULL) + goto out; + + /* ieee80211_tx_status() does not dereference anything from the + ieee80211_tx_info structure included in this cb, so it is safe + to get whatever we get from userspace and copy it here. */ + + /* check size of received custom buffer */ + if (nla_len(info->attrs[HWSIM_ATTR_CB_SKB]) != sizeof(skb->cb)) { + printk(KERN_DEBUG "mac80211_hwsim: not valid cb received\n"); + goto out; + } + + /* ieee80211_tx_status() does not dereference anything from the + ieee80211_tx_info structure included in this cb, so it is safe + to get whatever we get from userspace and copy it here. */ + + cb = (char *)nla_data(info->attrs[HWSIM_ATTR_CB_SKB]); + memcpy(skb->cb, cb, sizeof(skb->cb)); + + /* now send back TX status */ + txi = IEEE80211_SKB_CB(skb); + + if (txi->control.vif) + hwsim_check_magic(txi->control.vif); + if (txi->control.sta) + hwsim_check_sta_magic(txi->control.sta); + + ieee80211_tx_info_clear_status(txi); + txi->flags = flags; + + for (i = 0; i < IEEE80211_TX_MAX_RATES; i++) { + txi->status.rates[i].idx = tx_attempts[i].idx; + txi->status.rates[i].count = tx_attempts[i].count; + txi->status.rates[i].flags = tx_attempts[i].flags; + } + + txi->status.ack_signal = nla_get_u32(info->attrs[HWSIM_ATTR_SIGNAL]); + + if (!(txi->flags & IEEE80211_TX_CTL_NO_ACK) && + (txi->flags & IEEE80211_TX_STAT_ACK)) { + if (skb->len >= 16) { + hdr = (struct ieee80211_hdr *) skb->data; + mac80211_hwsim_monitor_ack(data2->hw, hdr->addr2); + } + } + ieee80211_tx_status_irqsafe(data2->hw, skb); + return 0; + +out: + kfree_skb(skb); + printk(KERN_DEBUG "mac80211_hwsim: error occured in %s\n", __func__); + return -1; + +} + +static int hwsim_cloned_frame_received_nl(struct sk_buff *skb_2, + struct genl_info *info) +{ + + struct mac80211_hwsim_data *data2; + struct ieee80211_rx_status rx_status; + + struct mac_address *dst = (struct mac_address *)nla_data( + info->attrs[HWSIM_ATTR_ADDR_RECEIVER]); + + int frame_data_len = nla_len(info->attrs[HWSIM_ATTR_FRAME]); + char* frame_data = (char *)nla_data(info->attrs[HWSIM_ATTR_FRAME]); + /* Allocate new skb here */ + struct sk_buff *skb = alloc_skb(IEEE80211_MAX_DATA_LEN, GFP_KERNEL); + if (skb == NULL) + goto out; + + if (frame_data_len <= IEEE80211_MAX_DATA_LEN) { + /* Copy the data */ + memcpy(skb_put(skb, frame_data_len), frame_data, + frame_data_len); + } else + goto out; + + data2 = get_hwsim_data_ref_from_addr(dst); + + if (data2 == NULL) + goto out; + + /*A frame is received from user space*/ + memset(&rx_status, 0, sizeof(rx_status)); + rx_status.freq = data2->channel->center_freq; + rx_status.band = data2->channel->band; + rx_status.rate_idx = nla_get_u32(info->attrs[HWSIM_ATTR_RX_RATE]); + rx_status.signal = nla_get_u32(info->attrs[HWSIM_ATTR_SIGNAL]); + + memcpy(IEEE80211_SKB_RXCB(skb), &rx_status, sizeof(rx_status)); + ieee80211_rx_irqsafe(data2->hw, skb); + + return 0; +out: + kfree_skb(skb); + printk(KERN_DEBUG "mac80211_hwsim: error occured in %s\n", __func__); + return -1; +} + +static int hwsim_register_received_nl(struct sk_buff *skb_2, + struct genl_info *info) +{ + if (info == NULL) + goto out; + + atomic_set(&wmediumd_pid, info->snd_pid); + + printk(KERN_DEBUG "mac80211_hwsim: received a REGISTER, " + "switching to wmediumd mode with pid %d\n", info->snd_pid); + + return 0; + +out: + printk(KERN_DEBUG "mac80211_hwsim: error occured in %s\n", __func__); + return -1; +} + +/* Generic Netlink operations array */ +static struct genl_ops hwsim_ops[] = { + { + .cmd = HWSIM_CMD_REGISTER, + .flags = 0, + .policy = hwsim_genl_policy, + .doit = hwsim_register_received_nl, + .dumpit = NULL, + }, + { + .cmd = HWSIM_CMD_FRAME, + .flags = 0, + .policy = hwsim_genl_policy, + .doit = hwsim_cloned_frame_received_nl, + .dumpit = NULL, + }, + { + .cmd = HWSIM_CMD_TX_INFO_FRAME, + .flags = 0, + .policy = hwsim_genl_policy, + .doit = hwsim_tx_info_frame_received_nl, + .dumpit = NULL, + }, +}; + +static int hwsim_init_netlink(void) +{ + int rc; + printk(KERN_INFO "mac80211_hwsim: initializing netlink\n"); + + atomic_set(&wmediumd_pid, 0); + + rc = genl_register_family(&hwsim_genl_family); + if (rc != 0) + goto failure; + rc = genl_register_ops(&hwsim_genl_family, &hwsim_ops[0]); + if (rc != 0) { + printk(KERN_DEBUG "mac80211_hwsim: register ops: %i\n", rc); + genl_unregister_family(&hwsim_genl_family); + goto failure; + } + rc = genl_register_ops(&hwsim_genl_family, &hwsim_ops[1]); + if (rc != 0) { + printk(KERN_DEBUG "mac80211_hwsim: register ops: %i\n", rc); + genl_unregister_family(&hwsim_genl_family); + goto failure; + } + rc = genl_register_ops(&hwsim_genl_family, &hwsim_ops[2]); + if (rc != 0) { + printk(KERN_DEBUG "mac80211_hwsim: register ops: %i\n", rc); + genl_unregister_family(&hwsim_genl_family); + goto failure; + } + return 0; + +failure: + printk(KERN_DEBUG "mac80211_hwsim: error occured in %s\n", __func__); + return -1; +} + +static void hwsim_exit_netlink(void) +{ + int ret; + + printk(KERN_INFO "mac80211_hwsim: closing netlink\n"); + /*unregister the functions*/ + + ret = genl_unregister_ops(&hwsim_genl_family, &hwsim_ops[0]); + if (ret != 0) { + printk(KERN_DEBUG "mac80211_hwsim: unregister ops: %i\n", ret); + return; + } + ret = genl_unregister_ops(&hwsim_genl_family, &hwsim_ops[1]); + if (ret != 0) { + printk(KERN_DEBUG "mac80211_hwsim: unregister ops: %i\n", ret); + return; + } + ret = genl_unregister_ops(&hwsim_genl_family, &hwsim_ops[2]); + if (ret != 0) { + printk(KERN_DEBUG "mac80211_hwsim: unregister ops: %i\n", ret); + return; + } + ret = genl_unregister_family(&hwsim_genl_family); + if (ret != 0) + printk(KERN_DEBUG "mac80211_hwsim: " + "unregister family %i\n", ret); +} + + DEFINE_SIMPLE_ATTRIBUTE(hwsim_fops_group, hwsim_fops_group_read, hwsim_fops_group_write, "%llx\n"); @@ -1379,6 +1741,10 @@ static int __init init_mac80211_hwsim(void) data->group = 1; mutex_init(&data->mutex); + /* Enable frame retransmission mechanism for a lossy channel */ + hw->max_rates = 4; + hw->max_rate_tries = 11; + /* Work to be done prior to ieee80211_register_hw() */ switch (regtest) { case HWSIM_REGTEST_DISABLED: @@ -1528,8 +1894,16 @@ static int __init init_mac80211_hwsim(void) rtnl_unlock(); + err = hwsim_init_netlink(); + if (err < 0) + goto failed_nl; + return 0; +failed_nl: + printk(KERN_DEBUG "mac80211_hwsim: failed initializing netlink\n"); + return err; + failed_mon: rtnl_unlock(); free_netdev(hwsim_mon); @@ -1550,6 +1924,8 @@ static void __exit exit_mac80211_hwsim(void) { printk(KERN_DEBUG "mac80211_hwsim: unregister radios\n"); + hwsim_exit_netlink(); + mac80211_hwsim_free(); unregister_netdev(hwsim_mon); } diff --git a/drivers/net/wireless/mac80211_hwsim.h b/drivers/net/wireless/mac80211_hwsim.h new file mode 100644 index 0000000..f1460e8 --- /dev/null +++ b/drivers/net/wireless/mac80211_hwsim.h @@ -0,0 +1,121 @@ +/* + * mac80211_hwsim - software simulator of 802.11 radio(s) for mac80211 + * Copyright (c) 2008, Jouni Malinen + * Copyright (c) 2011, Javier Lopez + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include + +/** + * DOC: Frame transmission/registration support + * + * Frame transmission and registration support exists to allow userspace + * entities such as wmediumd to receive and process all broadcasted + * frames from a mac80211_hwsim radio device. + * + * This allow user space applications to decide if the frame should be + * dropped or not and implement a wireless medium simulator at user space. + * + * Registration is done by sending a register message to the driver and + * will be automatically unregistered if the user application doesn't + * responds to sent frames. + * Once registered the user application has to take responsibility of + * broadcasting the frames to all listening mac80211_hwsim radio + * interfaces. + * + * For more technical details, see the corresponding command descriptions + * below. + */ + +/** + * enum hwsim_commands - supported hwsim commands + * + * @HWSIM_CMD_UNSPEC: unspecified command to catch errors + * + * @HWSIM_CMD_REGISTER: request to register and received all broadcasted + * frames by any mac80211_hwsim radio device. + * @HWSIM_CMD_FRAME: send/receive a broadcasted frame from/to kernel/user + * space, uses: + * %HWSIM_ATTR_ADDR_TRANSMITTER, %HWSIM_ATTR_ADDR_RECEIVER, + * %HWSIM_ATTR_FRAME, %HWSIM_ATTR_FLAGS, %HWSIM_ATTR_RX_RATE, + * %HWSIM_ATTR_SIGNAL, %HWSIM_ATTR_CB_SKB + * @HWSIM_CMD_TX_INFO_FRAME: Transmission info report from user space to + * kernel, uses: + * %HWSIM_ATTR_ADDR_TRANSMITTER, %HWSIM_ATTR_FRAME, %HWSIM_ATTR_FLAGS, + * %HWSIM_ATTR_TX_INFO, %HWSIM_ATTR_SIGNAL + * @__HWSIM_CMD_MAX: enum limit + */ +enum { + HWSIM_CMD_UNSPEC, + HWSIM_CMD_REGISTER, + HWSIM_CMD_FRAME, + HWSIM_CMD_TX_INFO_FRAME, + __HWSIM_CMD_MAX, +}; +#define HWSIM_CMD_MAX (_HWSIM_CMD_MAX - 1) + +/** + * enum hwsim_attrs - hwsim netlink attributes + * + * @HWSIM_ATTR_UNSPEC: unspecified attribute to catch errors + * + * @HWSIM_ATTR_ADDR_RECEIVER: MAC address of the radio device that + * the frame is broadcasted to + * @HWSIM_ATTR_ADDR_TRANSMITTER: MAC address of the radio device that + * the frame was broadcasted from + * @HWSIM_ATTR_FRAME: Data array + * @HWSIM_ATTR_FLAGS: mac80211 transmission flags, used to process + properly the frame at user space + * @HWSIM_ATTR_RX_RATE: estimated rx rate index for this frame at user + space + * @HWSIM_ATTR_SIGNAL: estimated RX signal for this frame at user + space + * @HWSIM_ATTR_TX_INFO: ieee80211_tx_rate array + * @HWSIM_ATTR_CB_SKB: sk_buff custom buffer of the broadcasted frame + * @__HWSIM_ATTR_MAX: enum limit + */ + + +enum { + HWSIM_ATTR_UNSPEC, + HWSIM_ATTR_ADDR_RECEIVER, + HWSIM_ATTR_ADDR_TRANSMITTER, + HWSIM_ATTR_FRAME, + HWSIM_ATTR_FLAGS, + HWSIM_ATTR_RX_RATE, + HWSIM_ATTR_SIGNAL, + HWSIM_ATTR_TX_INFO, + HWSIM_ATTR_CB_SKB, + __HWSIM_ATTR_MAX, +}; +#define HWSIM_ATTR_MAX (__HWSIM_ATTR_MAX - 1) + +static struct nla_policy hwsim_genl_policy[HWSIM_ATTR_MAX + 1] = { + [HWSIM_ATTR_ADDR_RECEIVER] = { .type = NLA_UNSPEC, + .len = 6*sizeof(u8) }, + [HWSIM_ATTR_ADDR_TRANSMITTER] = { .type = NLA_UNSPEC, + .len = 6*sizeof(u8) }, + [HWSIM_ATTR_FRAME] = { .type = NLA_BINARY, + .len = IEEE80211_MAX_DATA_LEN }, + [HWSIM_ATTR_FLAGS] = { .type = NLA_U32 }, + [HWSIM_ATTR_RX_RATE] = { .type = NLA_U32 }, + [HWSIM_ATTR_SIGNAL] = { .type = NLA_U32 }, + [HWSIM_ATTR_TX_INFO] = { .type = NLA_UNSPEC, + .len = IEEE80211_TX_MAX_RATES*sizeof( + struct ieee80211_tx_rate)}, + [HWSIM_ATTR_CB_SKB] = { .type = NLA_BINARY, .len = 48*sizeof(char) }, +}; + +#define VERSION_NR 1 + +static struct genl_family hwsim_genl_family = { + .id = GENL_ID_GENERATE, + .hdrsize = 0, + .name = "HWSIM", + .version = VERSION_NR, + .maxattr = HWSIM_ATTR_MAX, +}; -- 1.7.0.4