From mboxrd@z Thu Jan 1 00:00:00 1970 From: Tatyana Brokhman Subject: [PATCH v11 7/7] usb: Adding SuperSpeed support to dummy_hcd Date: Thu, 19 May 2011 14:43:32 +0300 Message-ID: <1305805417-31750-8-git-send-email-tlinder@codeaurora.org> References: <1305805417-31750-1-git-send-email-tlinder@codeaurora.org> Return-path: In-Reply-To: <1305805417-31750-1-git-send-email-tlinder-sgV2jX0FEOL9JmXXK+q4OQ@public.gmane.org> Sender: linux-usb-owner-u79uwXL29TY76Z2rM5mHXA@public.gmane.org To: greg-U8xfFu+wG4EAvxtiuMwx3w@public.gmane.org Cc: linux-usb-u79uwXL29TY76Z2rM5mHXA@public.gmane.org, balbi-l0cyMroinI0@public.gmane.org, ablay-sgV2jX0FEOL9JmXXK+q4OQ@public.gmane.org, linux-arm-msm-u79uwXL29TY76Z2rM5mHXA@public.gmane.org, Tatyana Brokhman , open list List-Id: linux-arm-msm@vger.kernel.org This patch adds SS support to the dummy hcd module. It may be used to test SS device when no (SS) HW is available. USB 3.0 hub includes 2 hubs - HS and SS ones. This patch adds support for a SS hub in the dummy_hcd module. Thus, when dummy_hcd enabled it will register 2 root hubs (SS and HS). Signed-off-by: Tatyana Brokhman --- drivers/usb/gadget/dummy_hcd.c | 511 +++++++++++++++++++++++++++++++++++----- 1 files changed, 455 insertions(+), 56 deletions(-) diff --git a/drivers/usb/gadget/dummy_hcd.c b/drivers/usb/gadget/dummy_hcd.c index cf197e1..bebc08f 100644 --- a/drivers/usb/gadget/dummy_hcd.c +++ b/drivers/usb/gadget/dummy_hcd.c @@ -190,6 +190,7 @@ struct dummy { * MASTER/HOST side support */ struct dummy_hcd *hs_hcd; + struct dummy_hcd *ss_hcd; }; static inline struct dummy_hcd *hcd_to_dummy_hcd(struct usb_hcd *hcd) @@ -220,7 +221,10 @@ static inline struct dummy *ep_to_dummy (struct dummy_ep *ep) static inline struct dummy_hcd *gadget_to_dummy_hcd(struct usb_gadget *gadget) { struct dummy *dum = container_of(gadget, struct dummy, gadget); - return dum->hs_hcd; + if (dum->gadget.speed == USB_SPEED_SUPER) + return dum->ss_hcd; + else + return dum->hs_hcd; } static inline struct dummy *gadget_dev_to_dummy (struct device *dev) @@ -268,10 +272,86 @@ stop_activity (struct dummy *dum) /* driver now does any non-usb quiescing necessary */ } +/** + * set_ss_link_state() - Sets the current state of the SuperSpeed link + * @dum_hcd: pointer to the dummy_hcd structure to update the link + * state for + * + * This function updates the port_status according to the link + * state. The old status is saved befor updating. + * Note: this function should be called only for SuperSpeed + * master and the caller must hold the lock. + */ +static void +set_ss_link_state(struct dummy_hcd *dum_hcd) +{ + struct dummy *dum = dum_hcd->dum; + dum_hcd->active = 0; + if ((dum_hcd->port_status & USB_SS_PORT_STAT_POWER) == 0) + dum_hcd->port_status = 0; + + /* UDC suspend must cause a disconnect */ + else if (!dum->pullup || dum->udc_suspended) { + dum_hcd->port_status &= ~(USB_PORT_STAT_CONNECTION | + USB_PORT_STAT_ENABLE); + if ((dum_hcd->old_status & USB_PORT_STAT_CONNECTION) != 0) + dum_hcd->port_status |= + (USB_PORT_STAT_C_CONNECTION << 16); + } else { + /* device is connected and not suspended */ + dum_hcd->port_status |= (USB_PORT_STAT_CONNECTION | + USB_PORT_STAT_SPEED_5GBPS) ; + if ((dum_hcd->old_status & USB_PORT_STAT_CONNECTION) == 0) + dum_hcd->port_status |= + (USB_PORT_STAT_C_CONNECTION << 16); + if ((dum_hcd->port_status & USB_PORT_STAT_ENABLE) == 1 && + (dum_hcd->port_status & USB_SS_PORT_LS_U0) == 1 && + dum_hcd->rh_state != DUMMY_RH_SUSPENDED) + dum_hcd->active = 1; + } + + + if ((dum_hcd->port_status & USB_PORT_STAT_ENABLE) == 0 || + dum_hcd->active) + dum_hcd->resuming = 0; + + /* if !connected or reset */ + if ((dum_hcd->port_status & USB_PORT_STAT_CONNECTION) == 0 || + (dum_hcd->port_status & USB_PORT_STAT_RESET) != 0) { + /* + * We're connected and not reseted (reset occured now), + * and driver attached - disconnect! + */ + if ((dum_hcd->old_status & USB_PORT_STAT_CONNECTION) != 0 && + (dum_hcd->old_status & USB_PORT_STAT_RESET) == 0 && + dum->driver) { + stop_activity(dum); + spin_unlock(&dum->lock); + dum->driver->disconnect(&dum->gadget); + spin_lock(&dum->lock); + } + } else if (dum_hcd->active != dum_hcd->old_active) { + if (dum_hcd->old_active && dum->driver->suspend) { + spin_unlock(&dum->lock); + dum->driver->suspend(&dum->gadget); + spin_lock(&dum->lock); + } else if (!dum_hcd->old_active && dum->driver->resume) { + spin_unlock(&dum->lock); + dum->driver->resume(&dum->gadget); + spin_lock(&dum->lock); + } + } + + dum_hcd->old_status = dum_hcd->port_status; + dum_hcd->old_active = dum_hcd->active; +} + /* caller must hold lock */ static void set_link_state(struct dummy_hcd *dum_hcd) { struct dummy *dum = dum_hcd->dum; + if (dum->gadget.speed == USB_SPEED_SUPER) + return; dum_hcd->active = 0; if ((dum_hcd->port_status & USB_PORT_STAT_POWER) == 0) @@ -357,13 +437,17 @@ dummy_enable (struct usb_ep *_ep, const struct usb_endpoint_descriptor *desc) dum = ep_to_dummy (ep); if (!dum->driver) return -ESHUTDOWN; - dum_hcd = dum->hs_hcd; + if (dum->gadget.speed == USB_SPEED_SUPER) + dum_hcd = dum->ss_hcd; + else + dum_hcd = dum->hs_hcd; if (!is_enabled(dum_hcd)) return -ESHUTDOWN; /* * For HS/FS devices only bits 0..10 of the wMaxPacketSize represent the * maximum packet size. + * For SS devices the wMaxPacketSize is limited by 1024. */ max = le16_to_cpu(desc->wMaxPacketSize) & 0x7ff; @@ -383,6 +467,10 @@ dummy_enable (struct usb_ep *_ep, const struct usb_endpoint_descriptor *desc) goto done; } switch (dum->gadget.speed) { + case USB_SPEED_SUPER: + if (max == 1024) + break; + goto done; case USB_SPEED_HIGH: if (max == 512) break; @@ -401,6 +489,7 @@ dummy_enable (struct usb_ep *_ep, const struct usb_endpoint_descriptor *desc) goto done; /* real hardware might not handle all packet sizes */ switch (dum->gadget.speed) { + case USB_SPEED_SUPER: case USB_SPEED_HIGH: if (max <= 1024) break; @@ -421,6 +510,7 @@ dummy_enable (struct usb_ep *_ep, const struct usb_endpoint_descriptor *desc) goto done; /* real hardware might not handle all packet sizes */ switch (dum->gadget.speed) { + case USB_SPEED_SUPER: case USB_SPEED_HIGH: if (max <= 1024) break; @@ -541,7 +631,10 @@ dummy_queue (struct usb_ep *_ep, struct usb_request *_req, return -EINVAL; dum = ep_to_dummy (ep); - dum_hcd = dum->hs_hcd; + if (dum->gadget.speed == USB_SPEED_SUPER) + dum_hcd = dum->ss_hcd; + else + dum_hcd = dum->hs_hcd; if (!dum->driver || !is_enabled(dum_hcd)) return -ESHUTDOWN; @@ -727,9 +820,13 @@ static int dummy_pullup (struct usb_gadget *_gadget, int value) dum = gadget_to_dummy_hcd(_gadget)->dum; spin_lock_irqsave (&dum->lock, flags); dum->pullup = (value != 0); - set_link_state(dum->hs_hcd); + if (dum->gadget.speed == USB_SPEED_SUPER) + set_ss_link_state(dum->ss_hcd); + else + set_link_state(dum->hs_hcd); spin_unlock_irqrestore (&dum->lock, flags); - usb_hcd_poll_rh_status(dum->hs_hcd->hcd); + usb_hcd_poll_rh_status((dum->gadget.speed == USB_SPEED_SUPER ? + dum->ss_hcd->hcd : dum->hs_hcd->hcd)); return 0; } @@ -810,8 +907,13 @@ usb_gadget_probe_driver(struct usb_gadget_driver *driver, } dum->gadget.ep0 = &dum->ep [0].ep; - dum->gadget.speed = min((u8)driver->speed, (u8)USB_SPEED_HIGH) ; - dum->ep[0].ep.maxpacket = 64; + dum->gadget.speed = driver->speed; + if (dum->gadget.speed == USB_SPEED_SUPER) { + for (i = 0; i < DUMMY_ENDPOINTS; i++) + dum->ep[i].ep.max_streams = 0x10; + dum->ep[0].ep.maxpacket = 9; + } else + dum->ep[0].ep.maxpacket = 64; list_del_init (&dum->ep [0].ep.ep_list); INIT_LIST_HEAD(&dum->fifo_req.queue); @@ -830,11 +932,18 @@ usb_gadget_probe_driver(struct usb_gadget_driver *driver, /* khubd will enumerate this in a while */ spin_lock_irq (&dum->lock); dum->pullup = 1; - dum->gadget.is_otg = (dum->hs_hcd->hcd->self.otg_port != 0); - set_link_state(dum->hs_hcd); + if (dum->gadget.speed == USB_SPEED_SUPER) { + dum->gadget.is_otg = (dum->ss_hcd->hcd->self.otg_port != 0); + set_ss_link_state(dum->ss_hcd); + } else { + dum->gadget.is_otg = (dum->hs_hcd->hcd->self.otg_port != 0); + set_link_state(dum->hs_hcd); + } + spin_unlock_irq (&dum->lock); - usb_hcd_poll_rh_status(dum->hs_hcd->hcd); + usb_hcd_poll_rh_status((dum->gadget.speed == USB_SPEED_SUPER ? + dum->ss_hcd->hcd : dum->hs_hcd->hcd)); return 0; } EXPORT_SYMBOL(usb_gadget_probe_driver); @@ -855,18 +964,24 @@ usb_gadget_unregister_driver (struct usb_gadget_driver *driver) spin_lock_irqsave (&dum->lock, flags); dum->pullup = 0; - set_link_state(dum->hs_hcd); + if (dum->gadget.speed == USB_SPEED_SUPER) + set_ss_link_state(dum->ss_hcd); + else + set_link_state(dum->hs_hcd); spin_unlock_irqrestore (&dum->lock, flags); driver->unbind (&dum->gadget); dum->gadget.dev.driver = NULL; dum->driver = NULL; - spin_lock_irqsave (&dum->lock, flags); dum->pullup = 0; - set_link_state(dum->hs_hcd); + if (dum->gadget.speed == USB_SPEED_SUPER) + set_ss_link_state(dum->ss_hcd); + else + set_link_state(dum->hs_hcd); spin_unlock_irqrestore (&dum->lock, flags); - usb_hcd_poll_rh_status(dum->hs_hcd->hcd); + usb_hcd_poll_rh_status((dum->gadget.speed == USB_SPEED_SUPER ? + dum->ss_hcd->hcd : dum->hs_hcd->hcd)); return 0; } EXPORT_SYMBOL (usb_gadget_unregister_driver); @@ -934,10 +1049,14 @@ static int dummy_udc_suspend (struct platform_device *pdev, pm_message_t state) dev_dbg (&pdev->dev, "%s\n", __func__); spin_lock_irq (&dum->lock); dum->udc_suspended = 1; - set_link_state(dum->hs_hcd); + if (dum->gadget.speed == USB_SPEED_SUPER) + set_ss_link_state(dum->ss_hcd); + else + set_link_state(dum->hs_hcd); spin_unlock_irq (&dum->lock); - usb_hcd_poll_rh_status(dum->hs_hcd->hcd); + usb_hcd_poll_rh_status((dum->gadget.speed == USB_SPEED_SUPER ? + dum->ss_hcd->hcd : dum->hs_hcd->hcd)); return 0; } @@ -948,10 +1067,14 @@ static int dummy_udc_resume (struct platform_device *pdev) dev_dbg (&pdev->dev, "%s\n", __func__); spin_lock_irq (&dum->lock); dum->udc_suspended = 0; - set_link_state(dum->hs_hcd); + if (dum->gadget.speed == USB_SPEED_SUPER) + set_ss_link_state(dum->ss_hcd); + else + set_link_state(dum->hs_hcd); spin_unlock_irq (&dum->lock); - usb_hcd_poll_rh_status(dum->hs_hcd->hcd); + usb_hcd_poll_rh_status((dum->gadget.speed == USB_SPEED_SUPER ? + dum->ss_hcd->hcd : dum->hs_hcd->hcd)); return 0; } @@ -1179,6 +1302,21 @@ static int periodic_bytes (struct dummy *dum, struct dummy_ep *ep) tmp *= 8 /* applies to entire frame */; limit += limit * tmp; } + if (dum->gadget.speed == USB_SPEED_SUPER) { + switch (ep->desc->bmAttributes & 0x03) { + case USB_ENDPOINT_XFER_ISOC: + /* Sec. 4.4.8.2 USB3.0 Spec */ + limit = 3 * 16 * 1024 * 8; + break; + case USB_ENDPOINT_XFER_INT: + /* Sec. 4.4.7.2 USB3.0 Spec */ + limit = 3 * 1024 * 8; + break; + case USB_ENDPOINT_XFER_BULK: + default: + break; + } + } return limit; } @@ -1191,7 +1329,8 @@ static struct dummy_ep *find_endpoint (struct dummy *dum, u8 address) { int i; - if (!is_active(dum->hs_hcd)) + if (!is_active((dum->gadget.speed == USB_SPEED_SUPER ? + dum->ss_hcd : dum->hs_hcd))) return NULL; if ((address & ~USB_DIR_IN) == 0) return &dum->ep [0]; @@ -1265,6 +1404,24 @@ static int handle_control_request(struct dummy_hcd *dum_hcd, struct urb *urb, case USB_DEVICE_A_ALT_HNP_SUPPORT: dum->gadget.a_alt_hnp_support = 1; break; + case USB_DEVICE_U1_ENABLE: + if (dum_hcd->hcd->speed == HCD_USB3) + w_value = USB_DEV_STAT_U1_ENABLED; + else + ret_val = -EOPNOTSUPP; + break; + case USB_DEVICE_U2_ENABLE: + if (dum_hcd->hcd->speed == HCD_USB3) + w_value = USB_DEV_STAT_U2_ENABLED; + else + ret_val = -EOPNOTSUPP; + break; + case USB_DEVICE_LTM_ENABLE: + if (dum_hcd->hcd->speed == HCD_USB3) + w_value = USB_DEV_STAT_LTM_ENABLED; + else + ret_val = -EOPNOTSUPP; + break; default: ret_val = -EOPNOTSUPP; } @@ -1291,6 +1448,24 @@ static int handle_control_request(struct dummy_hcd *dum_hcd, struct urb *urb, case USB_DEVICE_REMOTE_WAKEUP: w_value = USB_DEVICE_REMOTE_WAKEUP; break; + case USB_DEVICE_U1_ENABLE: + if (dum_hcd->hcd->speed == HCD_USB3) + w_value = USB_DEV_STAT_U1_ENABLED; + else + ret_val = -EOPNOTSUPP; + break; + case USB_DEVICE_U2_ENABLE: + if (dum_hcd->hcd->speed == HCD_USB3) + w_value = USB_DEV_STAT_U2_ENABLED; + else + ret_val = -EOPNOTSUPP; + break; + case USB_DEVICE_LTM_ENABLE: + if (dum_hcd->hcd->speed == HCD_USB3) + w_value = USB_DEV_STAT_LTM_ENABLED; + else + ret_val = -EOPNOTSUPP; + break; default: ret_val = -EOPNOTSUPP; break; @@ -1372,6 +1547,10 @@ static void dummy_timer(unsigned long _dum_hcd) case USB_SPEED_HIGH: total = 512/*bytes*/ * 13/*packets*/ * 8/*uframes*/; break; + case USB_SPEED_SUPER: + /* Bus speed is 500000 bytes/ms, so use a little less */ + total = 490000; + break; default: dev_err(dummy_dev(dum_hcd), "bogus device speed\n"); return; @@ -1589,7 +1768,10 @@ static int dummy_hub_status (struct usb_hcd *hcd, char *buf) if (dum_hcd->resuming && time_after_eq(jiffies, dum_hcd->re_timeout)) { dum_hcd->port_status |= (USB_PORT_STAT_C_SUSPEND << 16); dum_hcd->port_status &= ~USB_PORT_STAT_SUSPEND; - set_link_state(dum_hcd); + if (dum_hcd->hcd->speed == HCD_USB3) + set_ss_link_state(dum_hcd); + else + set_link_state(dum_hcd); } if ((dum_hcd->port_status & PORT_C_MASK) != 0) { @@ -1606,6 +1788,18 @@ done: } static inline void +ss_hub_descriptor(struct usb_hub_descriptor *desc) +{ + memset(desc, 0, sizeof *desc); + desc->bDescriptorType = 0x2a; + desc->bDescLength = 12; + desc->wHubCharacteristics = cpu_to_le16(0x0001); + desc->bNbrPorts = 1; + desc->u.ss.bHubHdrDecLat = 0x04; /* Worst case: 0.4 micro sec*/ + desc->u.ss.DeviceRemovable = 0xffff; +} + +static inline void hub_descriptor (struct usb_hub_descriptor *desc) { memset (desc, 0, sizeof *desc); @@ -1641,6 +1835,12 @@ static int dummy_hub_control ( case ClearPortFeature: switch (wValue) { case USB_PORT_FEAT_SUSPEND: + if (hcd->speed == HCD_USB3) { + dev_dbg(dummy_dev(dum_hcd), + "USB_PORT_FEAT_SUSPEND req not " + "supported for USB 3.0 roothub\n"); + goto error; + } if (dum_hcd->port_status & USB_PORT_STAT_SUSPEND) { /* 20msec resume signaling */ dum_hcd->resuming = 1; @@ -1649,16 +1849,37 @@ static int dummy_hub_control ( } break; case USB_PORT_FEAT_POWER: - if (dum_hcd->port_status & USB_PORT_STAT_POWER) - dev_dbg(dummy_dev(dum_hcd), "power-off\n"); + if (hcd->speed == HCD_USB3) { + if (dum_hcd->port_status & USB_PORT_STAT_POWER) + dev_dbg(dummy_dev(dum_hcd), + "power-off\n"); + } else + if (dum_hcd->port_status & + USB_SS_PORT_STAT_POWER) + dev_dbg(dummy_dev(dum_hcd), + "power-off\n"); /* FALLS THROUGH */ default: dum_hcd->port_status &= ~(1 << wValue); - set_link_state(dum_hcd); + if (hcd->speed == HCD_USB3) + set_ss_link_state(dum_hcd); + else + set_link_state(dum_hcd); } break; case GetHubDescriptor: - hub_descriptor((struct usb_hub_descriptor *) buf); + if (hcd->speed == HCD_USB3 && + (wLength < USB_DT_SS_HUB_SIZE || + wValue != (USB_DT_SS_HUB << 8))) { + dev_dbg(dummy_dev(dum_hcd), + "Wrong hub descriptor type for " + "USB 3.0 roothub.\n"); + goto error; + } + if (hcd->speed == HCD_USB3) + ss_hub_descriptor((struct usb_hub_descriptor *) buf); + else + hub_descriptor((struct usb_hub_descriptor *) buf); break; case GetHubStatus: *(__le32 *) buf = cpu_to_le32 (0); @@ -1681,25 +1902,31 @@ static int dummy_hub_control ( dum_hcd->port_status &= ~USB_PORT_STAT_RESET; if (dum_hcd->dum->pullup) { dum_hcd->port_status |= USB_PORT_STAT_ENABLE; - switch (dum_hcd->dum->gadget.speed) { - case USB_SPEED_HIGH: - dum_hcd->port_status |= - USB_PORT_STAT_HIGH_SPEED; - break; - case USB_SPEED_LOW: - dum_hcd->dum->gadget.ep0-> - maxpacket = 8; - dum_hcd->port_status |= - USB_PORT_STAT_LOW_SPEED; - break; - default: - dum_hcd->dum->gadget.speed = - USB_SPEED_FULL; - break; + + if (hcd->speed < HCD_USB3) { + switch (dum_hcd->dum->gadget.speed) { + case USB_SPEED_HIGH: + dum_hcd->port_status |= + USB_PORT_STAT_HIGH_SPEED; + break; + case USB_SPEED_LOW: + dum_hcd->dum->gadget.ep0-> + maxpacket = 8; + dum_hcd->port_status |= + USB_PORT_STAT_LOW_SPEED; + break; + default: + dum_hcd->dum->gadget.speed = + USB_SPEED_FULL; + break; + } } } } - set_link_state(dum_hcd); + if (hcd->speed == HCD_USB3) + set_ss_link_state(dum_hcd); + else + set_link_state(dum_hcd); ((__le16 *) buf)[0] = cpu_to_le16 (dum_hcd->port_status); ((__le16 *) buf)[1] = cpu_to_le16 (dum_hcd->port_status >> 16); break; @@ -1708,7 +1935,36 @@ static int dummy_hub_control ( break; case SetPortFeature: switch (wValue) { + case USB_PORT_FEAT_LINK_STATE: + if (hcd->speed != HCD_USB3) { + dev_dbg(dummy_dev(dum_hcd), + "USB_PORT_FEAT_LINK_STATE req not " + "supported for USB 2.0 roothub\n"); + goto error; + } + /* + * Since this is dummy we don't have an actual link so + * there is nothing to do for the SET_LINK_STATE cmd + */ + break; + case USB_PORT_FEAT_U1_TIMEOUT: + case USB_PORT_FEAT_U2_TIMEOUT: + /* TODO: add suspend/resume support! */ + if (hcd->speed != HCD_USB3) { + dev_dbg(dummy_dev(dum_hcd), + "USB_PORT_FEAT_U1/2_TIMEOUT req not " + "supported for USB 2.0 roothub\n"); + goto error; + } + break; case USB_PORT_FEAT_SUSPEND: + /* Applicable only for USB2.0 hub */ + if (hcd->speed == HCD_USB3) { + dev_dbg(dummy_dev(dum_hcd), + "USB_PORT_FEAT_SUSPEND req not " + "supported for USB 3.0 roothub\n"); + goto error; + } if (dum_hcd->active) { dum_hcd->port_status |= USB_PORT_STAT_SUSPEND; @@ -1723,12 +1979,33 @@ static int dummy_hub_control ( } break; case USB_PORT_FEAT_POWER: - dum_hcd->port_status |= USB_PORT_STAT_POWER; - set_link_state(dum_hcd); + if (hcd->speed == HCD_USB3) { + dum_hcd->port_status |= USB_SS_PORT_STAT_POWER; + set_ss_link_state(dum_hcd); + } else { + dum_hcd->port_status |= USB_PORT_STAT_POWER; + set_link_state(dum_hcd); + } break; + case USB_PORT_FEAT_BH_PORT_RESET: + /* Applicable only for USB3.0 hub */ + if (hcd->speed != HCD_USB3) { + dev_dbg(dummy_dev(dum_hcd), + "USB_PORT_FEAT_BH_PORT_RESET req not " + "supported for USB 2.0 roothub\n"); + goto error; + } + /* FALLS THROUGH */ case USB_PORT_FEAT_RESET: /* if it's already enabled, disable */ - dum_hcd->port_status &= ~(USB_PORT_STAT_ENABLE + if (hcd->speed == HCD_USB3) { + dum_hcd->port_status = 0; + dum_hcd->port_status = + (USB_SS_PORT_STAT_POWER | + USB_PORT_STAT_CONNECTION | + USB_PORT_STAT_RESET); + } else + dum_hcd->port_status &= ~(USB_PORT_STAT_ENABLE | USB_PORT_STAT_LOW_SPEED | USB_PORT_STAT_HIGH_SPEED); /* @@ -1737,21 +2014,50 @@ static int dummy_hub_control ( */ dum_hcd->dum->devstatus &= (1 << USB_DEVICE_SELF_POWERED); + /* + * FIXME USB3.0: what is the correct reset signaling + * interval? Is it still 50msec as for HS? + */ dum_hcd->re_timeout = jiffies + msecs_to_jiffies(50); /* FALLS THROUGH */ default: - if ((dum_hcd->port_status & - USB_PORT_STAT_POWER) != 0) { - dum_hcd->port_status |= (1 << wValue); - set_link_state(dum_hcd); - } + if (hcd->speed == HCD_USB3) { + if ((dum_hcd->port_status & + USB_SS_PORT_STAT_POWER) != 0) { + dum_hcd->port_status |= (1 << wValue); + set_ss_link_state(dum_hcd); + } + } else + if ((dum_hcd->port_status & + USB_PORT_STAT_POWER) != 0) { + dum_hcd->port_status |= (1 << wValue); + set_link_state(dum_hcd); + } + } + break; + case GetPortErrorCount: + if (hcd->speed != HCD_USB3) { + dev_dbg(dummy_dev(dum_hcd), + "GetPortErrorCount req not " + "supported for USB 2.0 roothub\n"); + goto error; + } + /* We'll always return 0 since this is a dummy hub */ + *(__le32 *) buf = cpu_to_le32(0); + break; + case SetHubDepth: + if (hcd->speed != HCD_USB3) { + dev_dbg(dummy_dev(dum_hcd), + "SetHubDepth req not supported for " + "USB 2.0 roothub\n"); + goto error; } break; - default: dev_dbg(dummy_dev(dum_hcd), "hub control req%04x v%04x i%04x l%d\n", typeReq, wValue, wIndex, wLength); +error: /* "protocol stall" on error */ retval = -EPIPE; } @@ -1770,7 +2076,10 @@ static int dummy_bus_suspend (struct usb_hcd *hcd) spin_lock_irq(&dum_hcd->dum->lock); dum_hcd->rh_state = DUMMY_RH_SUSPENDED; - set_link_state(dum_hcd); + if (hcd->speed == HCD_USB3) + set_ss_link_state(dum_hcd); + else + set_link_state(dum_hcd); hcd->state = HC_STATE_SUSPENDED; spin_unlock_irq(&dum_hcd->dum->lock); return 0; @@ -1788,7 +2097,10 @@ static int dummy_bus_resume (struct usb_hcd *hcd) rc = -ESHUTDOWN; } else { dum_hcd->rh_state = DUMMY_RH_RUNNING; - set_link_state(dum_hcd); + if (hcd->speed == HCD_USB3) + set_ss_link_state(dum_hcd); + else + set_link_state(dum_hcd); if (!list_empty(&dum_hcd->urbp_list)) mod_timer(&dum_hcd->timer, jiffies); hcd->state = HC_STATE_RUNNING; @@ -1812,6 +2124,9 @@ show_urb (char *buf, size_t size, struct urb *urb) case USB_SPEED_LOW: s = "ls"; break; case USB_SPEED_FULL: s = "fs"; break; case USB_SPEED_HIGH: s = "hs"; break; + case USB_SPEED_SUPER: + s = "ss"; + break; default: s = "?"; break; }; s; }), ep, ep ? (usb_pipein (urb->pipe) ? "in" : "out") : "", @@ -1848,6 +2163,26 @@ show_urbs (struct device *dev, struct device_attribute *attr, char *buf) } static DEVICE_ATTR (urbs, S_IRUGO, show_urbs, NULL); +static int dummy_start_ss(struct dummy_hcd *dum_hcd) +{ + init_timer(&dum_hcd->timer); + dum_hcd->timer.function = dummy_timer; + dum_hcd->timer.data = (unsigned long)dum_hcd; + dum_hcd->rh_state = DUMMY_RH_RUNNING; + INIT_LIST_HEAD(&dum_hcd->urbp_list); + dum_hcd->hcd->power_budget = POWER_BUDGET; + dum_hcd->hcd->state = HC_STATE_RUNNING; + dum_hcd->hcd->uses_new_polling = 1; +#ifdef CONFIG_USB_OTG + dum_hcd->hcd->self.otg_port = 1; +#endif + return 0; + + /* FIXME 'urbs' should be a per-device thing, maybe in usbcore */ + return device_create_file(dum_hcd->hcd->self.controller, + &dev_attr_urbs); +} + static int dummy_start(struct usb_hcd *hcd) { struct dummy_hcd *dum_hcd = hcd_to_dummy_hcd(hcd); @@ -1857,6 +2192,9 @@ static int dummy_start(struct usb_hcd *hcd) * talk to one device (the slave side). Also appears in sysfs, * just like more familiar pci-based HCDs. */ + if (!usb_hcd_is_primary_hcd(hcd)) + return dummy_start_ss(dum_hcd); + spin_lock_init(&dum_hcd->dum->lock); init_timer(&dum_hcd->timer); dum_hcd->timer.function = dummy_timer; @@ -1900,19 +2238,53 @@ static int dummy_setup(struct usb_hcd *hcd) the_controller.hs_hcd = hcd_to_dummy_hcd(hcd); the_controller.hs_hcd->hcd = hcd; the_controller.hs_hcd->dum = &the_controller; - /* Mark the first roothub as being USB 2.0. */ + /* + * Mark the first roothub as being USB 2.0. + * The USB 3.0 roothub will be registered later by + * dummy_hcd_probe() + */ hcd->speed = HCD_USB2; hcd->self.root_hub->speed = USB_SPEED_HIGH; + } else { + the_controller.ss_hcd = hcd_to_dummy_hcd(hcd); + the_controller.ss_hcd->hcd = hcd; + the_controller.ss_hcd->dum = &the_controller; + hcd->speed = HCD_USB3; + hcd->self.root_hub->speed = USB_SPEED_SUPER; } return 0; } +/* Change a group of bulk endpoints to support multiple stream IDs */ +int dummy_alloc_streams(struct usb_hcd *hcd, struct usb_device *udev, + struct usb_host_endpoint **eps, unsigned int num_eps, + unsigned int num_streams, gfp_t mem_flags) +{ + if (hcd->speed != HCD_USB3) + dev_dbg(dummy_dev(hcd_to_dummy_hcd(hcd)), + "%s() - ERROR! Not supported for USB2.0 roothub\n", + __func__); + return 0; +} + +/* Reverts a group of bulk endpoints back to not using stream IDs. */ +int dummy_free_streams(struct usb_hcd *hcd, struct usb_device *udev, + struct usb_host_endpoint **eps, unsigned int num_eps, + gfp_t mem_flags) +{ + if (hcd->speed != HCD_USB3) + dev_dbg(dummy_dev(hcd_to_dummy_hcd(hcd)), + "%s() - ERROR! Not supported for USB2.0 roothub\n", + __func__); + return 0; +} + static const struct hc_driver dummy_hcd = { .description = (char *) driver_name, .product_desc = "Dummy host controller", .hcd_priv_size = sizeof(struct dummy_hcd), - .flags = HCD_USB2, + .flags = HCD_USB3 | HCD_SHARED, .reset = dummy_setup, .start = dummy_start, @@ -1927,11 +2299,15 @@ static const struct hc_driver dummy_hcd = { .hub_control = dummy_hub_control, .bus_suspend = dummy_bus_suspend, .bus_resume = dummy_bus_resume, + + .alloc_streams = dummy_alloc_streams, + .free_streams = dummy_free_streams, }; static int dummy_hcd_probe(struct platform_device *pdev) { struct usb_hcd *hs_hcd; + struct usb_hcd *ss_hcd; int retval; dev_info(&pdev->dev, "%s, driver " DRIVER_VERSION "\n", driver_desc); @@ -1943,8 +2319,27 @@ static int dummy_hcd_probe(struct platform_device *pdev) retval = usb_add_hcd(hs_hcd, 0, 0); if (retval != 0) { usb_put_hcd(hs_hcd); - the_controller.hs_hcd = NULL; + return retval; + } + + ss_hcd = usb_create_shared_hcd(&dummy_hcd, &pdev->dev, + dev_name(&pdev->dev), hs_hcd); + if (!ss_hcd) { + retval = -ENOMEM; + goto dealloc_usb2_hcd; } + + retval = usb_add_hcd(ss_hcd, 0, 0); + if (retval) + goto put_usb3_hcd; + + return 0; + +put_usb3_hcd: + usb_put_hcd(ss_hcd); +dealloc_usb2_hcd: + usb_put_hcd(hs_hcd); + the_controller.hs_hcd = the_controller.ss_hcd = NULL; return retval; } @@ -1953,9 +2348,13 @@ static int dummy_hcd_remove (struct platform_device *pdev) struct dummy *dum; dum = (hcd_to_dummy_hcd(platform_get_drvdata(pdev)))->dum; + if (dum->ss_hcd) { + usb_remove_hcd(dum->ss_hcd->hcd); + usb_put_hcd(dum->ss_hcd->hcd); + } usb_remove_hcd(dum->hs_hcd->hcd); usb_put_hcd(dum->hs_hcd->hcd); - the_controller.hs_hcd = NULL; + the_controller.ss_hcd = the_controller.hs_hcd = NULL; return 0; } @@ -2029,7 +2428,7 @@ static int __init init (void) retval = platform_device_add(the_hcd_pdev); if (retval < 0) goto err_add_hcd; - if (!the_controller.hs_hcd) { + if (!the_controller.hs_hcd || !the_controller.ss_hcd) { /* * The hcd was added successfully but its probe function failed * for some reason. -- 1.7.3.3 -- Sent by an employee of the Qualcomm Innovation Center, Inc. The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum. -- To unsubscribe from this list: send the line "unsubscribe linux-usb" in the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org More majordomo info at http://vger.kernel.org/majordomo-info.html From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S933132Ab1ESLqB (ORCPT ); Thu, 19 May 2011 07:46:01 -0400 Received: from wolverine01.qualcomm.com ([199.106.114.254]:15124 "EHLO wolverine01.qualcomm.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S932351Ab1ESLp7 (ORCPT ); Thu, 19 May 2011 07:45:59 -0400 X-IronPort-AV: E=McAfee;i="5400,1158,6350"; a="92249663" From: Tatyana Brokhman To: greg@kroah.com Cc: linux-usb@vger.kernel.org, balbi@ti.com, ablay@codeaurora.org, linux-arm-msm@vger.kernel.org, Tatyana Brokhman , linux-kernel@vger.kernel.org (open list) Subject: [PATCH v11 7/7] usb: Adding SuperSpeed support to dummy_hcd Date: Thu, 19 May 2011 14:43:32 +0300 Message-Id: <1305805417-31750-8-git-send-email-tlinder@codeaurora.org> X-Mailer: git-send-email 1.7.3.3 In-Reply-To: <1305805417-31750-1-git-send-email-tlinder@codeaurora.org> References: <1305805417-31750-1-git-send-email-tlinder@codeaurora.org> Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org This patch adds SS support to the dummy hcd module. It may be used to test SS device when no (SS) HW is available. USB 3.0 hub includes 2 hubs - HS and SS ones. This patch adds support for a SS hub in the dummy_hcd module. Thus, when dummy_hcd enabled it will register 2 root hubs (SS and HS). Signed-off-by: Tatyana Brokhman --- drivers/usb/gadget/dummy_hcd.c | 511 +++++++++++++++++++++++++++++++++++----- 1 files changed, 455 insertions(+), 56 deletions(-) diff --git a/drivers/usb/gadget/dummy_hcd.c b/drivers/usb/gadget/dummy_hcd.c index cf197e1..bebc08f 100644 --- a/drivers/usb/gadget/dummy_hcd.c +++ b/drivers/usb/gadget/dummy_hcd.c @@ -190,6 +190,7 @@ struct dummy { * MASTER/HOST side support */ struct dummy_hcd *hs_hcd; + struct dummy_hcd *ss_hcd; }; static inline struct dummy_hcd *hcd_to_dummy_hcd(struct usb_hcd *hcd) @@ -220,7 +221,10 @@ static inline struct dummy *ep_to_dummy (struct dummy_ep *ep) static inline struct dummy_hcd *gadget_to_dummy_hcd(struct usb_gadget *gadget) { struct dummy *dum = container_of(gadget, struct dummy, gadget); - return dum->hs_hcd; + if (dum->gadget.speed == USB_SPEED_SUPER) + return dum->ss_hcd; + else + return dum->hs_hcd; } static inline struct dummy *gadget_dev_to_dummy (struct device *dev) @@ -268,10 +272,86 @@ stop_activity (struct dummy *dum) /* driver now does any non-usb quiescing necessary */ } +/** + * set_ss_link_state() - Sets the current state of the SuperSpeed link + * @dum_hcd: pointer to the dummy_hcd structure to update the link + * state for + * + * This function updates the port_status according to the link + * state. The old status is saved befor updating. + * Note: this function should be called only for SuperSpeed + * master and the caller must hold the lock. + */ +static void +set_ss_link_state(struct dummy_hcd *dum_hcd) +{ + struct dummy *dum = dum_hcd->dum; + dum_hcd->active = 0; + if ((dum_hcd->port_status & USB_SS_PORT_STAT_POWER) == 0) + dum_hcd->port_status = 0; + + /* UDC suspend must cause a disconnect */ + else if (!dum->pullup || dum->udc_suspended) { + dum_hcd->port_status &= ~(USB_PORT_STAT_CONNECTION | + USB_PORT_STAT_ENABLE); + if ((dum_hcd->old_status & USB_PORT_STAT_CONNECTION) != 0) + dum_hcd->port_status |= + (USB_PORT_STAT_C_CONNECTION << 16); + } else { + /* device is connected and not suspended */ + dum_hcd->port_status |= (USB_PORT_STAT_CONNECTION | + USB_PORT_STAT_SPEED_5GBPS) ; + if ((dum_hcd->old_status & USB_PORT_STAT_CONNECTION) == 0) + dum_hcd->port_status |= + (USB_PORT_STAT_C_CONNECTION << 16); + if ((dum_hcd->port_status & USB_PORT_STAT_ENABLE) == 1 && + (dum_hcd->port_status & USB_SS_PORT_LS_U0) == 1 && + dum_hcd->rh_state != DUMMY_RH_SUSPENDED) + dum_hcd->active = 1; + } + + + if ((dum_hcd->port_status & USB_PORT_STAT_ENABLE) == 0 || + dum_hcd->active) + dum_hcd->resuming = 0; + + /* if !connected or reset */ + if ((dum_hcd->port_status & USB_PORT_STAT_CONNECTION) == 0 || + (dum_hcd->port_status & USB_PORT_STAT_RESET) != 0) { + /* + * We're connected and not reseted (reset occured now), + * and driver attached - disconnect! + */ + if ((dum_hcd->old_status & USB_PORT_STAT_CONNECTION) != 0 && + (dum_hcd->old_status & USB_PORT_STAT_RESET) == 0 && + dum->driver) { + stop_activity(dum); + spin_unlock(&dum->lock); + dum->driver->disconnect(&dum->gadget); + spin_lock(&dum->lock); + } + } else if (dum_hcd->active != dum_hcd->old_active) { + if (dum_hcd->old_active && dum->driver->suspend) { + spin_unlock(&dum->lock); + dum->driver->suspend(&dum->gadget); + spin_lock(&dum->lock); + } else if (!dum_hcd->old_active && dum->driver->resume) { + spin_unlock(&dum->lock); + dum->driver->resume(&dum->gadget); + spin_lock(&dum->lock); + } + } + + dum_hcd->old_status = dum_hcd->port_status; + dum_hcd->old_active = dum_hcd->active; +} + /* caller must hold lock */ static void set_link_state(struct dummy_hcd *dum_hcd) { struct dummy *dum = dum_hcd->dum; + if (dum->gadget.speed == USB_SPEED_SUPER) + return; dum_hcd->active = 0; if ((dum_hcd->port_status & USB_PORT_STAT_POWER) == 0) @@ -357,13 +437,17 @@ dummy_enable (struct usb_ep *_ep, const struct usb_endpoint_descriptor *desc) dum = ep_to_dummy (ep); if (!dum->driver) return -ESHUTDOWN; - dum_hcd = dum->hs_hcd; + if (dum->gadget.speed == USB_SPEED_SUPER) + dum_hcd = dum->ss_hcd; + else + dum_hcd = dum->hs_hcd; if (!is_enabled(dum_hcd)) return -ESHUTDOWN; /* * For HS/FS devices only bits 0..10 of the wMaxPacketSize represent the * maximum packet size. + * For SS devices the wMaxPacketSize is limited by 1024. */ max = le16_to_cpu(desc->wMaxPacketSize) & 0x7ff; @@ -383,6 +467,10 @@ dummy_enable (struct usb_ep *_ep, const struct usb_endpoint_descriptor *desc) goto done; } switch (dum->gadget.speed) { + case USB_SPEED_SUPER: + if (max == 1024) + break; + goto done; case USB_SPEED_HIGH: if (max == 512) break; @@ -401,6 +489,7 @@ dummy_enable (struct usb_ep *_ep, const struct usb_endpoint_descriptor *desc) goto done; /* real hardware might not handle all packet sizes */ switch (dum->gadget.speed) { + case USB_SPEED_SUPER: case USB_SPEED_HIGH: if (max <= 1024) break; @@ -421,6 +510,7 @@ dummy_enable (struct usb_ep *_ep, const struct usb_endpoint_descriptor *desc) goto done; /* real hardware might not handle all packet sizes */ switch (dum->gadget.speed) { + case USB_SPEED_SUPER: case USB_SPEED_HIGH: if (max <= 1024) break; @@ -541,7 +631,10 @@ dummy_queue (struct usb_ep *_ep, struct usb_request *_req, return -EINVAL; dum = ep_to_dummy (ep); - dum_hcd = dum->hs_hcd; + if (dum->gadget.speed == USB_SPEED_SUPER) + dum_hcd = dum->ss_hcd; + else + dum_hcd = dum->hs_hcd; if (!dum->driver || !is_enabled(dum_hcd)) return -ESHUTDOWN; @@ -727,9 +820,13 @@ static int dummy_pullup (struct usb_gadget *_gadget, int value) dum = gadget_to_dummy_hcd(_gadget)->dum; spin_lock_irqsave (&dum->lock, flags); dum->pullup = (value != 0); - set_link_state(dum->hs_hcd); + if (dum->gadget.speed == USB_SPEED_SUPER) + set_ss_link_state(dum->ss_hcd); + else + set_link_state(dum->hs_hcd); spin_unlock_irqrestore (&dum->lock, flags); - usb_hcd_poll_rh_status(dum->hs_hcd->hcd); + usb_hcd_poll_rh_status((dum->gadget.speed == USB_SPEED_SUPER ? + dum->ss_hcd->hcd : dum->hs_hcd->hcd)); return 0; } @@ -810,8 +907,13 @@ usb_gadget_probe_driver(struct usb_gadget_driver *driver, } dum->gadget.ep0 = &dum->ep [0].ep; - dum->gadget.speed = min((u8)driver->speed, (u8)USB_SPEED_HIGH) ; - dum->ep[0].ep.maxpacket = 64; + dum->gadget.speed = driver->speed; + if (dum->gadget.speed == USB_SPEED_SUPER) { + for (i = 0; i < DUMMY_ENDPOINTS; i++) + dum->ep[i].ep.max_streams = 0x10; + dum->ep[0].ep.maxpacket = 9; + } else + dum->ep[0].ep.maxpacket = 64; list_del_init (&dum->ep [0].ep.ep_list); INIT_LIST_HEAD(&dum->fifo_req.queue); @@ -830,11 +932,18 @@ usb_gadget_probe_driver(struct usb_gadget_driver *driver, /* khubd will enumerate this in a while */ spin_lock_irq (&dum->lock); dum->pullup = 1; - dum->gadget.is_otg = (dum->hs_hcd->hcd->self.otg_port != 0); - set_link_state(dum->hs_hcd); + if (dum->gadget.speed == USB_SPEED_SUPER) { + dum->gadget.is_otg = (dum->ss_hcd->hcd->self.otg_port != 0); + set_ss_link_state(dum->ss_hcd); + } else { + dum->gadget.is_otg = (dum->hs_hcd->hcd->self.otg_port != 0); + set_link_state(dum->hs_hcd); + } + spin_unlock_irq (&dum->lock); - usb_hcd_poll_rh_status(dum->hs_hcd->hcd); + usb_hcd_poll_rh_status((dum->gadget.speed == USB_SPEED_SUPER ? + dum->ss_hcd->hcd : dum->hs_hcd->hcd)); return 0; } EXPORT_SYMBOL(usb_gadget_probe_driver); @@ -855,18 +964,24 @@ usb_gadget_unregister_driver (struct usb_gadget_driver *driver) spin_lock_irqsave (&dum->lock, flags); dum->pullup = 0; - set_link_state(dum->hs_hcd); + if (dum->gadget.speed == USB_SPEED_SUPER) + set_ss_link_state(dum->ss_hcd); + else + set_link_state(dum->hs_hcd); spin_unlock_irqrestore (&dum->lock, flags); driver->unbind (&dum->gadget); dum->gadget.dev.driver = NULL; dum->driver = NULL; - spin_lock_irqsave (&dum->lock, flags); dum->pullup = 0; - set_link_state(dum->hs_hcd); + if (dum->gadget.speed == USB_SPEED_SUPER) + set_ss_link_state(dum->ss_hcd); + else + set_link_state(dum->hs_hcd); spin_unlock_irqrestore (&dum->lock, flags); - usb_hcd_poll_rh_status(dum->hs_hcd->hcd); + usb_hcd_poll_rh_status((dum->gadget.speed == USB_SPEED_SUPER ? + dum->ss_hcd->hcd : dum->hs_hcd->hcd)); return 0; } EXPORT_SYMBOL (usb_gadget_unregister_driver); @@ -934,10 +1049,14 @@ static int dummy_udc_suspend (struct platform_device *pdev, pm_message_t state) dev_dbg (&pdev->dev, "%s\n", __func__); spin_lock_irq (&dum->lock); dum->udc_suspended = 1; - set_link_state(dum->hs_hcd); + if (dum->gadget.speed == USB_SPEED_SUPER) + set_ss_link_state(dum->ss_hcd); + else + set_link_state(dum->hs_hcd); spin_unlock_irq (&dum->lock); - usb_hcd_poll_rh_status(dum->hs_hcd->hcd); + usb_hcd_poll_rh_status((dum->gadget.speed == USB_SPEED_SUPER ? + dum->ss_hcd->hcd : dum->hs_hcd->hcd)); return 0; } @@ -948,10 +1067,14 @@ static int dummy_udc_resume (struct platform_device *pdev) dev_dbg (&pdev->dev, "%s\n", __func__); spin_lock_irq (&dum->lock); dum->udc_suspended = 0; - set_link_state(dum->hs_hcd); + if (dum->gadget.speed == USB_SPEED_SUPER) + set_ss_link_state(dum->ss_hcd); + else + set_link_state(dum->hs_hcd); spin_unlock_irq (&dum->lock); - usb_hcd_poll_rh_status(dum->hs_hcd->hcd); + usb_hcd_poll_rh_status((dum->gadget.speed == USB_SPEED_SUPER ? + dum->ss_hcd->hcd : dum->hs_hcd->hcd)); return 0; } @@ -1179,6 +1302,21 @@ static int periodic_bytes (struct dummy *dum, struct dummy_ep *ep) tmp *= 8 /* applies to entire frame */; limit += limit * tmp; } + if (dum->gadget.speed == USB_SPEED_SUPER) { + switch (ep->desc->bmAttributes & 0x03) { + case USB_ENDPOINT_XFER_ISOC: + /* Sec. 4.4.8.2 USB3.0 Spec */ + limit = 3 * 16 * 1024 * 8; + break; + case USB_ENDPOINT_XFER_INT: + /* Sec. 4.4.7.2 USB3.0 Spec */ + limit = 3 * 1024 * 8; + break; + case USB_ENDPOINT_XFER_BULK: + default: + break; + } + } return limit; } @@ -1191,7 +1329,8 @@ static struct dummy_ep *find_endpoint (struct dummy *dum, u8 address) { int i; - if (!is_active(dum->hs_hcd)) + if (!is_active((dum->gadget.speed == USB_SPEED_SUPER ? + dum->ss_hcd : dum->hs_hcd))) return NULL; if ((address & ~USB_DIR_IN) == 0) return &dum->ep [0]; @@ -1265,6 +1404,24 @@ static int handle_control_request(struct dummy_hcd *dum_hcd, struct urb *urb, case USB_DEVICE_A_ALT_HNP_SUPPORT: dum->gadget.a_alt_hnp_support = 1; break; + case USB_DEVICE_U1_ENABLE: + if (dum_hcd->hcd->speed == HCD_USB3) + w_value = USB_DEV_STAT_U1_ENABLED; + else + ret_val = -EOPNOTSUPP; + break; + case USB_DEVICE_U2_ENABLE: + if (dum_hcd->hcd->speed == HCD_USB3) + w_value = USB_DEV_STAT_U2_ENABLED; + else + ret_val = -EOPNOTSUPP; + break; + case USB_DEVICE_LTM_ENABLE: + if (dum_hcd->hcd->speed == HCD_USB3) + w_value = USB_DEV_STAT_LTM_ENABLED; + else + ret_val = -EOPNOTSUPP; + break; default: ret_val = -EOPNOTSUPP; } @@ -1291,6 +1448,24 @@ static int handle_control_request(struct dummy_hcd *dum_hcd, struct urb *urb, case USB_DEVICE_REMOTE_WAKEUP: w_value = USB_DEVICE_REMOTE_WAKEUP; break; + case USB_DEVICE_U1_ENABLE: + if (dum_hcd->hcd->speed == HCD_USB3) + w_value = USB_DEV_STAT_U1_ENABLED; + else + ret_val = -EOPNOTSUPP; + break; + case USB_DEVICE_U2_ENABLE: + if (dum_hcd->hcd->speed == HCD_USB3) + w_value = USB_DEV_STAT_U2_ENABLED; + else + ret_val = -EOPNOTSUPP; + break; + case USB_DEVICE_LTM_ENABLE: + if (dum_hcd->hcd->speed == HCD_USB3) + w_value = USB_DEV_STAT_LTM_ENABLED; + else + ret_val = -EOPNOTSUPP; + break; default: ret_val = -EOPNOTSUPP; break; @@ -1372,6 +1547,10 @@ static void dummy_timer(unsigned long _dum_hcd) case USB_SPEED_HIGH: total = 512/*bytes*/ * 13/*packets*/ * 8/*uframes*/; break; + case USB_SPEED_SUPER: + /* Bus speed is 500000 bytes/ms, so use a little less */ + total = 490000; + break; default: dev_err(dummy_dev(dum_hcd), "bogus device speed\n"); return; @@ -1589,7 +1768,10 @@ static int dummy_hub_status (struct usb_hcd *hcd, char *buf) if (dum_hcd->resuming && time_after_eq(jiffies, dum_hcd->re_timeout)) { dum_hcd->port_status |= (USB_PORT_STAT_C_SUSPEND << 16); dum_hcd->port_status &= ~USB_PORT_STAT_SUSPEND; - set_link_state(dum_hcd); + if (dum_hcd->hcd->speed == HCD_USB3) + set_ss_link_state(dum_hcd); + else + set_link_state(dum_hcd); } if ((dum_hcd->port_status & PORT_C_MASK) != 0) { @@ -1606,6 +1788,18 @@ done: } static inline void +ss_hub_descriptor(struct usb_hub_descriptor *desc) +{ + memset(desc, 0, sizeof *desc); + desc->bDescriptorType = 0x2a; + desc->bDescLength = 12; + desc->wHubCharacteristics = cpu_to_le16(0x0001); + desc->bNbrPorts = 1; + desc->u.ss.bHubHdrDecLat = 0x04; /* Worst case: 0.4 micro sec*/ + desc->u.ss.DeviceRemovable = 0xffff; +} + +static inline void hub_descriptor (struct usb_hub_descriptor *desc) { memset (desc, 0, sizeof *desc); @@ -1641,6 +1835,12 @@ static int dummy_hub_control ( case ClearPortFeature: switch (wValue) { case USB_PORT_FEAT_SUSPEND: + if (hcd->speed == HCD_USB3) { + dev_dbg(dummy_dev(dum_hcd), + "USB_PORT_FEAT_SUSPEND req not " + "supported for USB 3.0 roothub\n"); + goto error; + } if (dum_hcd->port_status & USB_PORT_STAT_SUSPEND) { /* 20msec resume signaling */ dum_hcd->resuming = 1; @@ -1649,16 +1849,37 @@ static int dummy_hub_control ( } break; case USB_PORT_FEAT_POWER: - if (dum_hcd->port_status & USB_PORT_STAT_POWER) - dev_dbg(dummy_dev(dum_hcd), "power-off\n"); + if (hcd->speed == HCD_USB3) { + if (dum_hcd->port_status & USB_PORT_STAT_POWER) + dev_dbg(dummy_dev(dum_hcd), + "power-off\n"); + } else + if (dum_hcd->port_status & + USB_SS_PORT_STAT_POWER) + dev_dbg(dummy_dev(dum_hcd), + "power-off\n"); /* FALLS THROUGH */ default: dum_hcd->port_status &= ~(1 << wValue); - set_link_state(dum_hcd); + if (hcd->speed == HCD_USB3) + set_ss_link_state(dum_hcd); + else + set_link_state(dum_hcd); } break; case GetHubDescriptor: - hub_descriptor((struct usb_hub_descriptor *) buf); + if (hcd->speed == HCD_USB3 && + (wLength < USB_DT_SS_HUB_SIZE || + wValue != (USB_DT_SS_HUB << 8))) { + dev_dbg(dummy_dev(dum_hcd), + "Wrong hub descriptor type for " + "USB 3.0 roothub.\n"); + goto error; + } + if (hcd->speed == HCD_USB3) + ss_hub_descriptor((struct usb_hub_descriptor *) buf); + else + hub_descriptor((struct usb_hub_descriptor *) buf); break; case GetHubStatus: *(__le32 *) buf = cpu_to_le32 (0); @@ -1681,25 +1902,31 @@ static int dummy_hub_control ( dum_hcd->port_status &= ~USB_PORT_STAT_RESET; if (dum_hcd->dum->pullup) { dum_hcd->port_status |= USB_PORT_STAT_ENABLE; - switch (dum_hcd->dum->gadget.speed) { - case USB_SPEED_HIGH: - dum_hcd->port_status |= - USB_PORT_STAT_HIGH_SPEED; - break; - case USB_SPEED_LOW: - dum_hcd->dum->gadget.ep0-> - maxpacket = 8; - dum_hcd->port_status |= - USB_PORT_STAT_LOW_SPEED; - break; - default: - dum_hcd->dum->gadget.speed = - USB_SPEED_FULL; - break; + + if (hcd->speed < HCD_USB3) { + switch (dum_hcd->dum->gadget.speed) { + case USB_SPEED_HIGH: + dum_hcd->port_status |= + USB_PORT_STAT_HIGH_SPEED; + break; + case USB_SPEED_LOW: + dum_hcd->dum->gadget.ep0-> + maxpacket = 8; + dum_hcd->port_status |= + USB_PORT_STAT_LOW_SPEED; + break; + default: + dum_hcd->dum->gadget.speed = + USB_SPEED_FULL; + break; + } } } } - set_link_state(dum_hcd); + if (hcd->speed == HCD_USB3) + set_ss_link_state(dum_hcd); + else + set_link_state(dum_hcd); ((__le16 *) buf)[0] = cpu_to_le16 (dum_hcd->port_status); ((__le16 *) buf)[1] = cpu_to_le16 (dum_hcd->port_status >> 16); break; @@ -1708,7 +1935,36 @@ static int dummy_hub_control ( break; case SetPortFeature: switch (wValue) { + case USB_PORT_FEAT_LINK_STATE: + if (hcd->speed != HCD_USB3) { + dev_dbg(dummy_dev(dum_hcd), + "USB_PORT_FEAT_LINK_STATE req not " + "supported for USB 2.0 roothub\n"); + goto error; + } + /* + * Since this is dummy we don't have an actual link so + * there is nothing to do for the SET_LINK_STATE cmd + */ + break; + case USB_PORT_FEAT_U1_TIMEOUT: + case USB_PORT_FEAT_U2_TIMEOUT: + /* TODO: add suspend/resume support! */ + if (hcd->speed != HCD_USB3) { + dev_dbg(dummy_dev(dum_hcd), + "USB_PORT_FEAT_U1/2_TIMEOUT req not " + "supported for USB 2.0 roothub\n"); + goto error; + } + break; case USB_PORT_FEAT_SUSPEND: + /* Applicable only for USB2.0 hub */ + if (hcd->speed == HCD_USB3) { + dev_dbg(dummy_dev(dum_hcd), + "USB_PORT_FEAT_SUSPEND req not " + "supported for USB 3.0 roothub\n"); + goto error; + } if (dum_hcd->active) { dum_hcd->port_status |= USB_PORT_STAT_SUSPEND; @@ -1723,12 +1979,33 @@ static int dummy_hub_control ( } break; case USB_PORT_FEAT_POWER: - dum_hcd->port_status |= USB_PORT_STAT_POWER; - set_link_state(dum_hcd); + if (hcd->speed == HCD_USB3) { + dum_hcd->port_status |= USB_SS_PORT_STAT_POWER; + set_ss_link_state(dum_hcd); + } else { + dum_hcd->port_status |= USB_PORT_STAT_POWER; + set_link_state(dum_hcd); + } break; + case USB_PORT_FEAT_BH_PORT_RESET: + /* Applicable only for USB3.0 hub */ + if (hcd->speed != HCD_USB3) { + dev_dbg(dummy_dev(dum_hcd), + "USB_PORT_FEAT_BH_PORT_RESET req not " + "supported for USB 2.0 roothub\n"); + goto error; + } + /* FALLS THROUGH */ case USB_PORT_FEAT_RESET: /* if it's already enabled, disable */ - dum_hcd->port_status &= ~(USB_PORT_STAT_ENABLE + if (hcd->speed == HCD_USB3) { + dum_hcd->port_status = 0; + dum_hcd->port_status = + (USB_SS_PORT_STAT_POWER | + USB_PORT_STAT_CONNECTION | + USB_PORT_STAT_RESET); + } else + dum_hcd->port_status &= ~(USB_PORT_STAT_ENABLE | USB_PORT_STAT_LOW_SPEED | USB_PORT_STAT_HIGH_SPEED); /* @@ -1737,21 +2014,50 @@ static int dummy_hub_control ( */ dum_hcd->dum->devstatus &= (1 << USB_DEVICE_SELF_POWERED); + /* + * FIXME USB3.0: what is the correct reset signaling + * interval? Is it still 50msec as for HS? + */ dum_hcd->re_timeout = jiffies + msecs_to_jiffies(50); /* FALLS THROUGH */ default: - if ((dum_hcd->port_status & - USB_PORT_STAT_POWER) != 0) { - dum_hcd->port_status |= (1 << wValue); - set_link_state(dum_hcd); - } + if (hcd->speed == HCD_USB3) { + if ((dum_hcd->port_status & + USB_SS_PORT_STAT_POWER) != 0) { + dum_hcd->port_status |= (1 << wValue); + set_ss_link_state(dum_hcd); + } + } else + if ((dum_hcd->port_status & + USB_PORT_STAT_POWER) != 0) { + dum_hcd->port_status |= (1 << wValue); + set_link_state(dum_hcd); + } + } + break; + case GetPortErrorCount: + if (hcd->speed != HCD_USB3) { + dev_dbg(dummy_dev(dum_hcd), + "GetPortErrorCount req not " + "supported for USB 2.0 roothub\n"); + goto error; + } + /* We'll always return 0 since this is a dummy hub */ + *(__le32 *) buf = cpu_to_le32(0); + break; + case SetHubDepth: + if (hcd->speed != HCD_USB3) { + dev_dbg(dummy_dev(dum_hcd), + "SetHubDepth req not supported for " + "USB 2.0 roothub\n"); + goto error; } break; - default: dev_dbg(dummy_dev(dum_hcd), "hub control req%04x v%04x i%04x l%d\n", typeReq, wValue, wIndex, wLength); +error: /* "protocol stall" on error */ retval = -EPIPE; } @@ -1770,7 +2076,10 @@ static int dummy_bus_suspend (struct usb_hcd *hcd) spin_lock_irq(&dum_hcd->dum->lock); dum_hcd->rh_state = DUMMY_RH_SUSPENDED; - set_link_state(dum_hcd); + if (hcd->speed == HCD_USB3) + set_ss_link_state(dum_hcd); + else + set_link_state(dum_hcd); hcd->state = HC_STATE_SUSPENDED; spin_unlock_irq(&dum_hcd->dum->lock); return 0; @@ -1788,7 +2097,10 @@ static int dummy_bus_resume (struct usb_hcd *hcd) rc = -ESHUTDOWN; } else { dum_hcd->rh_state = DUMMY_RH_RUNNING; - set_link_state(dum_hcd); + if (hcd->speed == HCD_USB3) + set_ss_link_state(dum_hcd); + else + set_link_state(dum_hcd); if (!list_empty(&dum_hcd->urbp_list)) mod_timer(&dum_hcd->timer, jiffies); hcd->state = HC_STATE_RUNNING; @@ -1812,6 +2124,9 @@ show_urb (char *buf, size_t size, struct urb *urb) case USB_SPEED_LOW: s = "ls"; break; case USB_SPEED_FULL: s = "fs"; break; case USB_SPEED_HIGH: s = "hs"; break; + case USB_SPEED_SUPER: + s = "ss"; + break; default: s = "?"; break; }; s; }), ep, ep ? (usb_pipein (urb->pipe) ? "in" : "out") : "", @@ -1848,6 +2163,26 @@ show_urbs (struct device *dev, struct device_attribute *attr, char *buf) } static DEVICE_ATTR (urbs, S_IRUGO, show_urbs, NULL); +static int dummy_start_ss(struct dummy_hcd *dum_hcd) +{ + init_timer(&dum_hcd->timer); + dum_hcd->timer.function = dummy_timer; + dum_hcd->timer.data = (unsigned long)dum_hcd; + dum_hcd->rh_state = DUMMY_RH_RUNNING; + INIT_LIST_HEAD(&dum_hcd->urbp_list); + dum_hcd->hcd->power_budget = POWER_BUDGET; + dum_hcd->hcd->state = HC_STATE_RUNNING; + dum_hcd->hcd->uses_new_polling = 1; +#ifdef CONFIG_USB_OTG + dum_hcd->hcd->self.otg_port = 1; +#endif + return 0; + + /* FIXME 'urbs' should be a per-device thing, maybe in usbcore */ + return device_create_file(dum_hcd->hcd->self.controller, + &dev_attr_urbs); +} + static int dummy_start(struct usb_hcd *hcd) { struct dummy_hcd *dum_hcd = hcd_to_dummy_hcd(hcd); @@ -1857,6 +2192,9 @@ static int dummy_start(struct usb_hcd *hcd) * talk to one device (the slave side). Also appears in sysfs, * just like more familiar pci-based HCDs. */ + if (!usb_hcd_is_primary_hcd(hcd)) + return dummy_start_ss(dum_hcd); + spin_lock_init(&dum_hcd->dum->lock); init_timer(&dum_hcd->timer); dum_hcd->timer.function = dummy_timer; @@ -1900,19 +2238,53 @@ static int dummy_setup(struct usb_hcd *hcd) the_controller.hs_hcd = hcd_to_dummy_hcd(hcd); the_controller.hs_hcd->hcd = hcd; the_controller.hs_hcd->dum = &the_controller; - /* Mark the first roothub as being USB 2.0. */ + /* + * Mark the first roothub as being USB 2.0. + * The USB 3.0 roothub will be registered later by + * dummy_hcd_probe() + */ hcd->speed = HCD_USB2; hcd->self.root_hub->speed = USB_SPEED_HIGH; + } else { + the_controller.ss_hcd = hcd_to_dummy_hcd(hcd); + the_controller.ss_hcd->hcd = hcd; + the_controller.ss_hcd->dum = &the_controller; + hcd->speed = HCD_USB3; + hcd->self.root_hub->speed = USB_SPEED_SUPER; } return 0; } +/* Change a group of bulk endpoints to support multiple stream IDs */ +int dummy_alloc_streams(struct usb_hcd *hcd, struct usb_device *udev, + struct usb_host_endpoint **eps, unsigned int num_eps, + unsigned int num_streams, gfp_t mem_flags) +{ + if (hcd->speed != HCD_USB3) + dev_dbg(dummy_dev(hcd_to_dummy_hcd(hcd)), + "%s() - ERROR! Not supported for USB2.0 roothub\n", + __func__); + return 0; +} + +/* Reverts a group of bulk endpoints back to not using stream IDs. */ +int dummy_free_streams(struct usb_hcd *hcd, struct usb_device *udev, + struct usb_host_endpoint **eps, unsigned int num_eps, + gfp_t mem_flags) +{ + if (hcd->speed != HCD_USB3) + dev_dbg(dummy_dev(hcd_to_dummy_hcd(hcd)), + "%s() - ERROR! Not supported for USB2.0 roothub\n", + __func__); + return 0; +} + static const struct hc_driver dummy_hcd = { .description = (char *) driver_name, .product_desc = "Dummy host controller", .hcd_priv_size = sizeof(struct dummy_hcd), - .flags = HCD_USB2, + .flags = HCD_USB3 | HCD_SHARED, .reset = dummy_setup, .start = dummy_start, @@ -1927,11 +2299,15 @@ static const struct hc_driver dummy_hcd = { .hub_control = dummy_hub_control, .bus_suspend = dummy_bus_suspend, .bus_resume = dummy_bus_resume, + + .alloc_streams = dummy_alloc_streams, + .free_streams = dummy_free_streams, }; static int dummy_hcd_probe(struct platform_device *pdev) { struct usb_hcd *hs_hcd; + struct usb_hcd *ss_hcd; int retval; dev_info(&pdev->dev, "%s, driver " DRIVER_VERSION "\n", driver_desc); @@ -1943,8 +2319,27 @@ static int dummy_hcd_probe(struct platform_device *pdev) retval = usb_add_hcd(hs_hcd, 0, 0); if (retval != 0) { usb_put_hcd(hs_hcd); - the_controller.hs_hcd = NULL; + return retval; + } + + ss_hcd = usb_create_shared_hcd(&dummy_hcd, &pdev->dev, + dev_name(&pdev->dev), hs_hcd); + if (!ss_hcd) { + retval = -ENOMEM; + goto dealloc_usb2_hcd; } + + retval = usb_add_hcd(ss_hcd, 0, 0); + if (retval) + goto put_usb3_hcd; + + return 0; + +put_usb3_hcd: + usb_put_hcd(ss_hcd); +dealloc_usb2_hcd: + usb_put_hcd(hs_hcd); + the_controller.hs_hcd = the_controller.ss_hcd = NULL; return retval; } @@ -1953,9 +2348,13 @@ static int dummy_hcd_remove (struct platform_device *pdev) struct dummy *dum; dum = (hcd_to_dummy_hcd(platform_get_drvdata(pdev)))->dum; + if (dum->ss_hcd) { + usb_remove_hcd(dum->ss_hcd->hcd); + usb_put_hcd(dum->ss_hcd->hcd); + } usb_remove_hcd(dum->hs_hcd->hcd); usb_put_hcd(dum->hs_hcd->hcd); - the_controller.hs_hcd = NULL; + the_controller.ss_hcd = the_controller.hs_hcd = NULL; return 0; } @@ -2029,7 +2428,7 @@ static int __init init (void) retval = platform_device_add(the_hcd_pdev); if (retval < 0) goto err_add_hcd; - if (!the_controller.hs_hcd) { + if (!the_controller.hs_hcd || !the_controller.ss_hcd) { /* * The hcd was added successfully but its probe function failed * for some reason. -- 1.7.3.3 -- Sent by an employee of the Qualcomm Innovation Center, Inc. The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum.