All of lore.kernel.org
 help / color / mirror / Atom feed
From: Marc Dietrich <marvin24-Mmb7MZpHnFY@public.gmane.org>
To: Colin Cross <ccross-z5hGa2qSFaRBDgjK7y7TUQ@public.gmane.org>
Cc: linux-tegra-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
	Olof Johansson <olof-nZhT3qVonbNeoWH0uzbU5w@public.gmane.org>,
	linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org
Subject: [PATCH 6/6] ARM: tegra: paz00: enable wifi card
Date: Thu, 19 May 2011 14:08:30 +0200	[thread overview]
Message-ID: <1305806910-3903-7-git-send-email-marvin24@gmx.de> (raw)
In-Reply-To: <1305806910-3903-1-git-send-email-marvin24-Mmb7MZpHnFY@public.gmane.org>

The Wifi card attached to one usb port needs to be unkilled. The
corresponding gpio and also the gpio for the LED are exported to be
controlled by userspace later on.

Signed-off-by: Marc Dietrich <marvin24-Mmb7MZpHnFY@public.gmane.org>
---
 arch/arm/mach-tegra/board-paz00-pinmux.c |    2 ++
 arch/arm/mach-tegra/board-paz00.c        |   22 ++++++++++++++++++++++
 arch/arm/mach-tegra/board-paz00.h        |    7 +++++++
 3 files changed, 31 insertions(+), 0 deletions(-)

diff --git a/arch/arm/mach-tegra/board-paz00-pinmux.c b/arch/arm/mach-tegra/board-paz00-pinmux.c
index bdd2627..41a6304 100644
--- a/arch/arm/mach-tegra/board-paz00-pinmux.c
+++ b/arch/arm/mach-tegra/board-paz00-pinmux.c
@@ -145,6 +145,8 @@ static struct tegra_gpio_table gpio_table[] = {
 	{ .gpio = TEGRA_GPIO_SD1_WP,	.enable = true },
 	{ .gpio = TEGRA_GPIO_SD1_POWER,	.enable = true },
 	{ .gpio = TEGRA_ULPI_RST,	.enable = true },
+	{ .gpio = TEGRA_WIFI_PWRN,	.enable = true },
+	{ .gpio = TEGRA_WIFI_LED,	.enable = true },
 };
 
 void paz00_pinmux_init(void)
diff --git a/arch/arm/mach-tegra/board-paz00.c b/arch/arm/mach-tegra/board-paz00.c
index 1b076f6..c78ef4c 100644
--- a/arch/arm/mach-tegra/board-paz00.c
+++ b/arch/arm/mach-tegra/board-paz00.c
@@ -135,6 +135,27 @@ static void __init tegra_paz00_fixup(struct machine_desc *desc,
 	mi->bank[0].size = 448 * SZ_1M;
 }
 
+static void __init paz00_wifi_init(void)
+{
+	int ret;
+
+	/* unlock hw rfkill */
+	ret = gpio_request_one(TEGRA_WIFI_PWRN, GPIOF_OUT_INIT_HIGH,
+			"wifi_pwrn");
+	if(ret) {
+		pr_warning("WIFI: could not request PWRN gpio!\n");
+		return;
+	}
+	gpio_export(TEGRA_WIFI_PWRN, 0);
+
+	/* export wifi led */
+	ret = gpio_request_one(TEGRA_WIFI_LED, GPIOF_OUT_INIT_HIGH,
+			"wifi_led");
+	if(ret)
+		pr_warning("WIFI: could not request LED gpio!\n");
+	gpio_export(TEGRA_WIFI_LED, 0);
+}
+
 static __initdata struct tegra_clk_init_table paz00_clk_init_table[] = {
 	/* name		parent		rate		enabled */
 	{ "uartd",	"pll_p",	216000000,	true },
@@ -167,6 +188,7 @@ static void __init tegra_paz00_init(void)
 
 	paz00_i2c_init();
 	paz00_usb_init();
+	paz00_wifi_init();
 }
 
 MACHINE_START(PAZ00, "Toshiba AC100 / Dynabook AZ")
diff --git a/arch/arm/mach-tegra/board-paz00.h b/arch/arm/mach-tegra/board-paz00.h
index d4ff39d..a49543a 100644
--- a/arch/arm/mach-tegra/board-paz00.h
+++ b/arch/arm/mach-tegra/board-paz00.h
@@ -17,11 +17,18 @@
 #ifndef _MACH_TEGRA_BOARD_PAZ00_H
 #define _MACH_TEGRA_BOARD_PAZ00_H
 
+/* SDMMC */
 #define TEGRA_GPIO_SD1_CD		TEGRA_GPIO_PV5
 #define TEGRA_GPIO_SD1_WP		TEGRA_GPIO_PH1
 #define TEGRA_GPIO_SD1_POWER		TEGRA_GPIO_PT3
+
+/* ULPI */
 #define TEGRA_ULPI_RST			TEGRA_GPIO_PV0
 
+/* Wifi */
+#define TEGRA_WIFI_LED			TEGRA_GPIO_PD0
+#define TEGRA_WIFI_PWRN			TEGRA_GPIO_PK5
+
 void paz00_pinmux_init(void);
 
 #endif
-- 
1.7.4.2

WARNING: multiple messages have this Message-ID
From: marvin24@gmx.de (Marc Dietrich)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH 6/6] ARM: tegra: paz00: enable wifi card
Date: Thu, 19 May 2011 14:08:30 +0200	[thread overview]
Message-ID: <1305806910-3903-7-git-send-email-marvin24@gmx.de> (raw)
In-Reply-To: <1305806910-3903-1-git-send-email-marvin24@gmx.de>

The Wifi card attached to one usb port needs to be unkilled. The
corresponding gpio and also the gpio for the LED are exported to be
controlled by userspace later on.

Signed-off-by: Marc Dietrich <marvin24@gmx.de>
---
 arch/arm/mach-tegra/board-paz00-pinmux.c |    2 ++
 arch/arm/mach-tegra/board-paz00.c        |   22 ++++++++++++++++++++++
 arch/arm/mach-tegra/board-paz00.h        |    7 +++++++
 3 files changed, 31 insertions(+), 0 deletions(-)

diff --git a/arch/arm/mach-tegra/board-paz00-pinmux.c b/arch/arm/mach-tegra/board-paz00-pinmux.c
index bdd2627..41a6304 100644
--- a/arch/arm/mach-tegra/board-paz00-pinmux.c
+++ b/arch/arm/mach-tegra/board-paz00-pinmux.c
@@ -145,6 +145,8 @@ static struct tegra_gpio_table gpio_table[] = {
 	{ .gpio = TEGRA_GPIO_SD1_WP,	.enable = true },
 	{ .gpio = TEGRA_GPIO_SD1_POWER,	.enable = true },
 	{ .gpio = TEGRA_ULPI_RST,	.enable = true },
+	{ .gpio = TEGRA_WIFI_PWRN,	.enable = true },
+	{ .gpio = TEGRA_WIFI_LED,	.enable = true },
 };
 
 void paz00_pinmux_init(void)
diff --git a/arch/arm/mach-tegra/board-paz00.c b/arch/arm/mach-tegra/board-paz00.c
index 1b076f6..c78ef4c 100644
--- a/arch/arm/mach-tegra/board-paz00.c
+++ b/arch/arm/mach-tegra/board-paz00.c
@@ -135,6 +135,27 @@ static void __init tegra_paz00_fixup(struct machine_desc *desc,
 	mi->bank[0].size = 448 * SZ_1M;
 }
 
+static void __init paz00_wifi_init(void)
+{
+	int ret;
+
+	/* unlock hw rfkill */
+	ret = gpio_request_one(TEGRA_WIFI_PWRN, GPIOF_OUT_INIT_HIGH,
+			"wifi_pwrn");
+	if(ret) {
+		pr_warning("WIFI: could not request PWRN gpio!\n");
+		return;
+	}
+	gpio_export(TEGRA_WIFI_PWRN, 0);
+
+	/* export wifi led */
+	ret = gpio_request_one(TEGRA_WIFI_LED, GPIOF_OUT_INIT_HIGH,
+			"wifi_led");
+	if(ret)
+		pr_warning("WIFI: could not request LED gpio!\n");
+	gpio_export(TEGRA_WIFI_LED, 0);
+}
+
 static __initdata struct tegra_clk_init_table paz00_clk_init_table[] = {
 	/* name		parent		rate		enabled */
 	{ "uartd",	"pll_p",	216000000,	true },
@@ -167,6 +188,7 @@ static void __init tegra_paz00_init(void)
 
 	paz00_i2c_init();
 	paz00_usb_init();
+	paz00_wifi_init();
 }
 
 MACHINE_START(PAZ00, "Toshiba AC100 / Dynabook AZ")
diff --git a/arch/arm/mach-tegra/board-paz00.h b/arch/arm/mach-tegra/board-paz00.h
index d4ff39d..a49543a 100644
--- a/arch/arm/mach-tegra/board-paz00.h
+++ b/arch/arm/mach-tegra/board-paz00.h
@@ -17,11 +17,18 @@
 #ifndef _MACH_TEGRA_BOARD_PAZ00_H
 #define _MACH_TEGRA_BOARD_PAZ00_H
 
+/* SDMMC */
 #define TEGRA_GPIO_SD1_CD		TEGRA_GPIO_PV5
 #define TEGRA_GPIO_SD1_WP		TEGRA_GPIO_PH1
 #define TEGRA_GPIO_SD1_POWER		TEGRA_GPIO_PT3
+
+/* ULPI */
 #define TEGRA_ULPI_RST			TEGRA_GPIO_PV0
 
+/* Wifi */
+#define TEGRA_WIFI_LED			TEGRA_GPIO_PD0
+#define TEGRA_WIFI_PWRN			TEGRA_GPIO_PK5
+
 void paz00_pinmux_init(void);
 
 #endif
-- 
1.7.4.2

  parent reply	other threads:[~2011-05-19 12:08 UTC|newest]

Thread overview: 22+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2011-05-19 12:08 [PATCH 0/6 V2] ARM: tegra: paz00 patches for 2.6.40 Marc Dietrich
2011-05-19 12:08 ` Marc Dietrich
     [not found] ` <1305806910-3903-1-git-send-email-marvin24-Mmb7MZpHnFY@public.gmane.org>
2011-05-19 12:08   ` [PATCH 1/6] ARM: tegra: paz00: whitespace cleanup Marc Dietrich
2011-05-19 12:08     ` Marc Dietrich
2011-05-19 12:08   ` [PATCH 2/6] ARM: tegra: paz00: register i2c busses Marc Dietrich
2011-05-19 12:08     ` Marc Dietrich
2011-05-19 12:08   ` [PATCH 3/6] ARM: tegra: paz00: enable usb ports Marc Dietrich
2011-05-19 12:08     ` Marc Dietrich
2011-05-19 12:08   ` [PATCH 4/6] ARM: tegra: paz00: cleanup sdhci ports Marc Dietrich
2011-05-19 12:08     ` Marc Dietrich
2011-05-19 12:08   ` [PATCH 5/6] ARM: tegra: paz00: change the machine name Marc Dietrich
2011-05-19 12:08     ` Marc Dietrich
2011-05-19 12:08   ` Marc Dietrich [this message]
2011-05-19 12:08     ` [PATCH 6/6] ARM: tegra: paz00: enable wifi card Marc Dietrich
2011-05-19 20:06     ` Dmitry Artamonow
2011-05-19 20:06       ` Dmitry Artamonow
2011-05-20  7:50       ` Marc Dietich
2011-05-20  7:50         ` Marc Dietich
2011-07-10 22:14   ` [PATCH 0/6 V2] ARM: tegra: paz00 patches for 2.6.40 Colin Cross
2011-07-10 22:14     ` Colin Cross
     [not found]     ` <CAMbhsRSH2iyv0_1seVtwSQ7AbHmPbz+VqSVkhfLgsNA8+dOwJA-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org>
2011-07-12 10:47       ` Marc Dietrich
2011-07-12 10:47         ` Marc Dietrich

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1305806910-3903-7-git-send-email-marvin24@gmx.de \
    --to=marvin24-mmb7mzphnfy@public.gmane.org \
    --cc=ccross-z5hGa2qSFaRBDgjK7y7TUQ@public.gmane.org \
    --cc=linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org \
    --cc=linux-tegra-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
    --cc=olof-nZhT3qVonbNeoWH0uzbU5w@public.gmane.org \
    --subject='Re: [PATCH 6/6] ARM: tegra: paz00: enable wifi card' \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.