All of lore.kernel.org
 help / color / mirror / Atom feed
From: s.hauer@pengutronix.de (Sascha Hauer)
To: linux-arm-kernel@lists.infradead.org
Subject: i.MX consolidation patches
Date: Thu, 19 May 2011 18:47:20 +0200	[thread overview]
Message-ID: <1305823648-2428-1-git-send-email-s.hauer@pengutronix.de> (raw)

The following series cleans up some ifdeffery and in the end
allows to compile all armv4 and armv5 based i.MXs together in a
single kernel. The corresponding defconfigs are merged into one.

This series breaks XIP support for these i.MXs. It should be possible
to keep it, but it would require another level of Kconfig indirection
which I wanted to avoid.

Sascha

Sascha Hauer (7):
      ARM i.MX: fix last user of iomux.h and remove it
      ARM i.MX: define CLOCK_TICK_RATE to bogus value
      ARM i.MX: remove SoC defines around header includes
      ARM i.MX: dmav1: kill SoC ifdefs
      ARM i.MX Allow to compile together i.MX1/21/25/27
      ARM i.MX mxc.h: use CONFIG_SOC_* instead of CONFIG_ARCH_*
      ARM i.MX debug macro: use CONFIG_SOC_* instead of CONFIG_ARCH_*

Uwe Kleine-K?nig (1):
      ARM: mxc: update defconfigs

 .../{mx27_defconfig => imx_armv4_armv5_defconfig}  |   59 ++++++++++--
 arch/arm/configs/mx1_defconfig                     |   91 ------------------
 arch/arm/configs/mx21_defconfig                    |   97 --------------------
 arch/arm/configs/mx3_defconfig                     |   43 +++++++--
 arch/arm/configs/mx51_defconfig                    |   55 +++++++++--
 arch/arm/mach-imx/Kconfig                          |   51 ++++-------
 arch/arm/mach-imx/Makefile                         |   10 +-
 arch/arm/mach-imx/Makefile.boot                    |   16 ---
 arch/arm/mach-imx/dma-v1.c                         |   25 +-----
 arch/arm/mach-imx/mach-imx27_visstrim_m10.c        |    2 +-
 arch/arm/plat-mxc/Kconfig                          |   18 +---
 arch/arm/plat-mxc/devices/platform-imx-dma.c       |    2 +-
 arch/arm/plat-mxc/include/mach/debug-macro.S       |   10 +-
 arch/arm/plat-mxc/include/mach/hardware.h          |   28 +-----
 arch/arm/plat-mxc/include/mach/iomux.h             |   26 -----
 arch/arm/plat-mxc/include/mach/mxc.h               |    8 +-
 arch/arm/plat-mxc/include/mach/timex.h             |   13 +--
 17 files changed, 177 insertions(+), 377 deletions(-)
 rename arch/arm/configs/{mx27_defconfig => imx_armv4_armv5_defconfig} (72%)
 delete mode 100644 arch/arm/configs/mx1_defconfig
 delete mode 100644 arch/arm/configs/mx21_defconfig
 delete mode 100644 arch/arm/plat-mxc/include/mach/iomux.h

             reply	other threads:[~2011-05-19 16:47 UTC|newest]

Thread overview: 46+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2011-05-19 16:47 Sascha Hauer [this message]
2011-05-19 16:47 ` [PATCH 1/8] ARM i.MX: fix last user of iomux.h and remove it Sascha Hauer
2011-05-19 16:47 ` [PATCH 2/8] ARM i.MX: define CLOCK_TICK_RATE to bogus value Sascha Hauer
2011-05-19 16:47 ` [PATCH 3/8] ARM i.MX: remove SoC defines around header includes Sascha Hauer
2011-05-19 16:47 ` [PATCH 4/8] ARM i.MX: dmav1: kill SoC ifdefs Sascha Hauer
2011-05-19 16:47 ` [PATCH 5/8] ARM i.MX Allow to compile together i.MX1/21/25/27 Sascha Hauer
2011-05-19 18:04   ` Uwe Kleine-König
2011-05-19 19:03     ` Sascha Hauer
2011-05-19 19:44       ` Nicolas Pitre
2011-05-19 19:50         ` Sascha Hauer
2011-06-01 13:22   ` [PATCH 5/8 v2] " Sascha Hauer
2011-06-01 13:25     ` Russell King - ARM Linux
2011-06-01 15:24     ` Arnd Bergmann
2011-06-01 16:47       ` Sascha Hauer
2011-06-01 17:59         ` Arnd Bergmann
2011-05-19 16:47 ` [PATCH 6/8] ARM i.MX mxc.h: use CONFIG_SOC_* instead of CONFIG_ARCH_* Sascha Hauer
2011-05-19 16:47 ` [PATCH 7/8] ARM i.MX debug macro: " Sascha Hauer
2011-05-19 16:54   ` Sergei Shtylyov
2011-05-19 19:07     ` Sascha Hauer
2011-05-19 16:47 ` [PATCH 8/8] ARM: mxc: update defconfigs Sascha Hauer
2011-05-30  7:57 ` i.MX consolidation patches Shawn Guo
2011-06-01 12:35   ` Sascha Hauer
2011-06-01 13:47     ` Russell King - ARM Linux
2011-06-01 14:18       ` Sascha Hauer
2011-06-01 14:24         ` Russell King - ARM Linux
2011-06-01 14:36           ` Sascha Hauer
2011-06-01 14:59             ` Uwe Kleine-König
2011-06-22  7:56           ` Sascha Hauer
2011-06-22  8:11             ` Russell King - ARM Linux
2011-06-22  8:32               ` Sascha Hauer
2011-06-22  9:03                 ` Russell King - ARM Linux
2011-06-22 14:58                   ` Sascha Hauer
2011-06-22 15:10                     ` Arnd Bergmann
2011-06-22 15:14                       ` Russell King - ARM Linux
2011-06-22 15:23                         ` Arnd Bergmann
2011-06-22 15:22                     ` Russell King - ARM Linux
2011-06-22 16:35                       ` Sascha Hauer
2011-06-01 21:08         ` Wolfgang Denk
2011-06-01 23:04           ` Matt Sealey
2011-06-02 10:34             ` Sascha Hauer
2011-06-02 11:23               ` Russell King - ARM Linux
2011-06-02 15:46             ` Wolfgang Denk
2011-06-02 23:59               ` Matt Sealey
2011-06-03 12:02               ` Sascha Hauer
2011-06-03 12:17                 ` Wolfgang Denk
2011-06-03 14:18                   ` Sascha Hauer

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1305823648-2428-1-git-send-email-s.hauer@pengutronix.de \
    --to=s.hauer@pengutronix.de \
    --cc=linux-arm-kernel@lists.infradead.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.