* Very high CPU load when idle with 3.0-rc1
@ 2011-05-30 5:59 Damien Wyart
2011-05-30 11:34 ` Peter Zijlstra
` (2 more replies)
0 siblings, 3 replies; 22+ messages in thread
From: Damien Wyart @ 2011-05-30 5:59 UTC (permalink / raw)
To: Peter Zijlstra, Ingo Molnar, Mike Galbraith; +Cc: linux-kernel
Hi,
Testing 3.0-rc1 on a core i7 (4 cores + HT), I get a load average of 9.0
when idle. No process is shown running or in "D state" in htop. The box
is behaving normal, no impression of lag or slowness.
Not sure what other info to include, I guess this should be quite easy
to reproduce.
Best,
--
Damien Wyart
^ permalink raw reply [flat|nested] 22+ messages in thread
* Re: Very high CPU load when idle with 3.0-rc1
2011-05-30 5:59 Very high CPU load when idle with 3.0-rc1 Damien Wyart
@ 2011-05-30 11:34 ` Peter Zijlstra
2011-05-30 12:17 ` Ingo Molnar
` (3 more replies)
2011-05-30 11:50 ` Very high CPU load when idle with 3.0-rc1 Damien Wyart
2011-05-30 12:22 ` Morten P.D. Stevens
2 siblings, 4 replies; 22+ messages in thread
From: Peter Zijlstra @ 2011-05-30 11:34 UTC (permalink / raw)
To: Damien Wyart; +Cc: Ingo Molnar, Mike Galbraith, linux-kernel, paulmck
On Mon, 2011-05-30 at 07:59 +0200, Damien Wyart wrote:
> Hi,
>
> Testing 3.0-rc1 on a core i7 (4 cores + HT), I get a load average of 9.0
> when idle. No process is shown running or in "D state" in htop. The box
> is behaving normal, no impression of lag or slowness.
>
> Not sure what other info to include, I guess this should be quite easy
> to reproduce.
---
Subject: rcu: Cure load woes
Commit cc3ce5176d83 (rcu: Start RCU kthreads in TASK_INTERRUPTIBLE
state) fudges a sleeping task' state, resulting in the scheduler seeing
a TASK_UNINTERRUPTIBLE task going to sleep, but a TASK_INTERRUPTIBLE
task waking up. The result is unbalanced load calculation.
The problem that patch tried to address is that the RCU threads could
stay in UNINTERRUPTIBLE state for quite a while and triggering the hung
task detector due to on-demand wake-ups.
Cure the problem differently by always giving the tasks at least one
wake-up once the CPU is fully up and running, this will kick them out of
the initial UNINTERRUPTIBLE state and into the regular INTERRUPTIBLE
wait state.
The alternative would be teaching kthread_create() to start threads as
INTERRUPTIBLE but that needs a tad more thought.
Reported-by: Damien Wyart <damien.wyart@free.fr>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
---
kernel/rcutree.c | 54 ++++++++++++++++++++++++++++++++++++++++-------
kernel/rcutree_plugin.h | 11 ++++++++-
2 files changed, 56 insertions(+), 9 deletions(-)
diff --git a/kernel/rcutree.c b/kernel/rcutree.c
index 77a7671..89419ff 100644
--- a/kernel/rcutree.c
+++ b/kernel/rcutree.c
@@ -1648,7 +1648,6 @@ static int __cpuinit rcu_spawn_one_cpu_kthread(int cpu)
if (IS_ERR(t))
return PTR_ERR(t);
kthread_bind(t, cpu);
- set_task_state(t, TASK_INTERRUPTIBLE);
per_cpu(rcu_cpu_kthread_cpu, cpu) = cpu;
WARN_ON_ONCE(per_cpu(rcu_cpu_kthread_task, cpu) != NULL);
per_cpu(rcu_cpu_kthread_task, cpu) = t;
@@ -1756,7 +1755,6 @@ static int __cpuinit rcu_spawn_one_node_kthread(struct rcu_state *rsp,
if (IS_ERR(t))
return PTR_ERR(t);
raw_spin_lock_irqsave(&rnp->lock, flags);
- set_task_state(t, TASK_INTERRUPTIBLE);
rnp->node_kthread_task = t;
raw_spin_unlock_irqrestore(&rnp->lock, flags);
sp.sched_priority = 99;
@@ -1765,6 +1763,8 @@ static int __cpuinit rcu_spawn_one_node_kthread(struct rcu_state *rsp,
return rcu_spawn_one_boost_kthread(rsp, rnp, rnp_index);
}
+static void rcu_wake_one_boost_kthread(struct rcu_node *rnp);
+
/*
* Spawn all kthreads -- called as soon as the scheduler is running.
*/
@@ -1772,18 +1772,30 @@ static int __init rcu_spawn_kthreads(void)
{
int cpu;
struct rcu_node *rnp;
+ struct task_struct *t;
rcu_kthreads_spawnable = 1;
for_each_possible_cpu(cpu) {
per_cpu(rcu_cpu_has_work, cpu) = 0;
- if (cpu_online(cpu))
+ if (cpu_online(cpu)) {
(void)rcu_spawn_one_cpu_kthread(cpu);
+ t = per_cpu(rcu_cpu_kthread_task, cpu);
+ if (t)
+ wake_up_process(t);
+ }
}
rnp = rcu_get_root(rcu_state);
(void)rcu_spawn_one_node_kthread(rcu_state, rnp);
+ if (rnp->node_kthread_task)
+ wake_up_process(rnp->node_kthread_task);
if (NUM_RCU_NODES > 1) {
- rcu_for_each_leaf_node(rcu_state, rnp)
+ rcu_for_each_leaf_node(rcu_state, rnp) {
(void)rcu_spawn_one_node_kthread(rcu_state, rnp);
+ t = rnp->node_kthread_task;
+ if (t)
+ wake_up_process(t);
+ rcu_wake_one_boost_kthread(rnp);
+ }
}
return 0;
}
@@ -2188,14 +2200,14 @@ rcu_init_percpu_data(int cpu, struct rcu_state *rsp, int preemptible)
raw_spin_unlock_irqrestore(&rsp->onofflock, flags);
}
-static void __cpuinit rcu_online_cpu(int cpu)
+static void __cpuinit rcu_prepare_cpu(int cpu)
{
rcu_init_percpu_data(cpu, &rcu_sched_state, 0);
rcu_init_percpu_data(cpu, &rcu_bh_state, 0);
rcu_preempt_init_percpu_data(cpu);
}
-static void __cpuinit rcu_online_kthreads(int cpu)
+static void __cpuinit rcu_prepare_kthreads(int cpu)
{
struct rcu_data *rdp = per_cpu_ptr(rcu_state->rda, cpu);
struct rcu_node *rnp = rdp->mynode;
@@ -2209,6 +2221,31 @@ static void __cpuinit rcu_online_kthreads(int cpu)
}
/*
+ * kthread_create() creates threads in TASK_UNINTERRUPTIBLE state,
+ * but the RCU threads are woken on demand, and if demand is low this
+ * could be a while triggering the hung task watchdog.
+ *
+ * In order to avoid this, poke all tasks once the CPU is fully
+ * up and running.
+ */
+static void __cpuinit rcu_online_kthreads(int cpu)
+{
+ struct rcu_data *rdp = per_cpu_ptr(rcu_state->rda, cpu);
+ struct rcu_node *rnp = rdp->mynode;
+ struct task_struct *t;
+
+ t = per_cpu(rcu_cpu_kthread_task, cpu);
+ if (t)
+ wake_up_process(t);
+
+ t = rnp->node_kthread_task;
+ if (t)
+ wake_up_process(t);
+
+ rcu_wake_one_boost_kthread(rnp);
+}
+
+/*
* Handle CPU online/offline notification events.
*/
static int __cpuinit rcu_cpu_notify(struct notifier_block *self,
@@ -2221,10 +2258,11 @@ static int __cpuinit rcu_cpu_notify(struct notifier_block *self,
switch (action) {
case CPU_UP_PREPARE:
case CPU_UP_PREPARE_FROZEN:
- rcu_online_cpu(cpu);
- rcu_online_kthreads(cpu);
+ rcu_prepare_cpu(cpu);
+ rcu_prepare_kthreads(cpu);
break;
case CPU_ONLINE:
+ rcu_online_kthreads(cpu);
case CPU_DOWN_FAILED:
rcu_node_kthread_setaffinity(rnp, -1);
rcu_cpu_kthread_setrt(cpu, 1);
diff --git a/kernel/rcutree_plugin.h b/kernel/rcutree_plugin.h
index a767b7d..2910de7 100644
--- a/kernel/rcutree_plugin.h
+++ b/kernel/rcutree_plugin.h
@@ -1295,7 +1295,6 @@ static int __cpuinit rcu_spawn_one_boost_kthread(struct rcu_state *rsp,
if (IS_ERR(t))
return PTR_ERR(t);
raw_spin_lock_irqsave(&rnp->lock, flags);
- set_task_state(t, TASK_INTERRUPTIBLE);
rnp->boost_kthread_task = t;
raw_spin_unlock_irqrestore(&rnp->lock, flags);
sp.sched_priority = RCU_KTHREAD_PRIO;
@@ -1303,6 +1302,12 @@ static int __cpuinit rcu_spawn_one_boost_kthread(struct rcu_state *rsp,
return 0;
}
+static void __cpuinit rcu_wake_one_boost_kthread(struct rcu_node *rnp)
+{
+ if (rnp->boost_kthread_task)
+ wake_up_process(rnp->boost_thread_task);
+}
+
#else /* #ifdef CONFIG_RCU_BOOST */
static void rcu_initiate_boost(struct rcu_node *rnp, unsigned long flags)
@@ -1326,6 +1331,10 @@ static int __cpuinit rcu_spawn_one_boost_kthread(struct rcu_state *rsp,
return 0;
}
+static void __cpuinit rcu_wake_one_boost_kthread(struct rcu_node *rnp)
+{
+}
+
#endif /* #else #ifdef CONFIG_RCU_BOOST */
#ifndef CONFIG_SMP
^ permalink raw reply related [flat|nested] 22+ messages in thread
* Re: Very high CPU load when idle with 3.0-rc1
2011-05-30 5:59 Very high CPU load when idle with 3.0-rc1 Damien Wyart
2011-05-30 11:34 ` Peter Zijlstra
@ 2011-05-30 11:50 ` Damien Wyart
2011-05-30 12:22 ` Morten P.D. Stevens
2 siblings, 0 replies; 22+ messages in thread
From: Damien Wyart @ 2011-05-30 11:50 UTC (permalink / raw)
To: Peter Zijlstra, Ingo Molnar, Mike Galbraith; +Cc: linux-kernel
[-- Attachment #1: Type: text/plain, Size: 375 bytes --]
> Testing 3.0-rc1 on a core i7 (4 cores + HT), I get a load average of 9.0
> when idle. No process is shown running or in "D state" in htop. The box
> is behaving normal, no impression of lag or slowness.
> Not sure what other info to include, I guess this should be quite easy
> to reproduce.
Here the .config in case it is needed for further testing...
--
Damien Wyart
[-- Attachment #2: config.2640 --]
[-- Type: text/plain, Size: 53678 bytes --]
#
# Automatically generated make config: don't edit
# Linux/x86_64 2.6.39-git Kernel Configuration
#
CONFIG_64BIT=y
# CONFIG_X86_32 is not set
CONFIG_X86_64=y
CONFIG_X86=y
CONFIG_INSTRUCTION_DECODER=y
CONFIG_OUTPUT_FORMAT="elf64-x86-64"
CONFIG_ARCH_DEFCONFIG="arch/x86/configs/x86_64_defconfig"
CONFIG_GENERIC_CMOS_UPDATE=y
CONFIG_CLOCKSOURCE_WATCHDOG=y
CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_GENERIC_CLOCKEVENTS_BROADCAST=y
CONFIG_LOCKDEP_SUPPORT=y
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_HAVE_LATENCYTOP_SUPPORT=y
CONFIG_MMU=y
CONFIG_ZONE_DMA=y
CONFIG_NEED_DMA_MAP_STATE=y
CONFIG_NEED_SG_DMA_LENGTH=y
CONFIG_GENERIC_ISA_DMA=y
CONFIG_GENERIC_IOMAP=y
CONFIG_GENERIC_BUG=y
CONFIG_GENERIC_BUG_RELATIVE_POINTERS=y
CONFIG_GENERIC_HWEIGHT=y
CONFIG_ARCH_MAY_HAVE_PC_FDC=y
# CONFIG_RWSEM_GENERIC_SPINLOCK is not set
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_ARCH_HAS_CPU_IDLE_WAIT=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_GENERIC_TIME_VSYSCALL=y
CONFIG_ARCH_HAS_CPU_RELAX=y
CONFIG_ARCH_HAS_DEFAULT_IDLE=y
CONFIG_ARCH_HAS_CACHE_LINE_SIZE=y
CONFIG_HAVE_SETUP_PER_CPU_AREA=y
CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK=y
CONFIG_NEED_PER_CPU_PAGE_FIRST_CHUNK=y
CONFIG_HAVE_CPUMASK_OF_CPU_MAP=y
CONFIG_ARCH_HIBERNATION_POSSIBLE=y
CONFIG_ARCH_SUSPEND_POSSIBLE=y
CONFIG_ZONE_DMA32=y
CONFIG_ARCH_POPULATES_NODE_MAP=y
CONFIG_AUDIT_ARCH=y
CONFIG_ARCH_SUPPORTS_OPTIMIZED_INLINING=y
CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
CONFIG_X86_64_SMP=y
CONFIG_X86_HT=y
CONFIG_ARCH_HWEIGHT_CFLAGS="-fcall-saved-rdi -fcall-saved-rsi -fcall-saved-rdx -fcall-saved-rcx -fcall-saved-r8 -fcall-saved-r9 -fcall-saved-r10 -fcall-saved-r11"
# CONFIG_KTIME_SCALAR is not set
CONFIG_ARCH_CPU_PROBE_RELEASE=y
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
CONFIG_CONSTRUCTORS=y
CONFIG_HAVE_IRQ_WORK=y
CONFIG_IRQ_WORK=y
#
# General setup
#
CONFIG_EXPERIMENTAL=y
CONFIG_INIT_ENV_ARG_LIMIT=32
CONFIG_CROSS_COMPILE=""
CONFIG_LOCALVERSION=""
# CONFIG_LOCALVERSION_AUTO is not set
CONFIG_HAVE_KERNEL_GZIP=y
CONFIG_HAVE_KERNEL_BZIP2=y
CONFIG_HAVE_KERNEL_LZMA=y
CONFIG_HAVE_KERNEL_XZ=y
CONFIG_HAVE_KERNEL_LZO=y
CONFIG_KERNEL_GZIP=y
# CONFIG_KERNEL_BZIP2 is not set
# CONFIG_KERNEL_LZMA is not set
# CONFIG_KERNEL_XZ is not set
# CONFIG_KERNEL_LZO is not set
CONFIG_SWAP=y
CONFIG_SYSVIPC=y
CONFIG_SYSVIPC_SYSCTL=y
# CONFIG_POSIX_MQUEUE is not set
CONFIG_BSD_PROCESS_ACCT=y
CONFIG_BSD_PROCESS_ACCT_V3=y
# CONFIG_FHANDLE is not set
# CONFIG_TASKSTATS is not set
# CONFIG_AUDIT is not set
CONFIG_HAVE_GENERIC_HARDIRQS=y
#
# IRQ subsystem
#
CONFIG_GENERIC_HARDIRQS=y
CONFIG_HAVE_SPARSE_IRQ=y
CONFIG_GENERIC_IRQ_PROBE=y
CONFIG_GENERIC_IRQ_SHOW=y
CONFIG_GENERIC_PENDING_IRQ=y
CONFIG_IRQ_FORCED_THREADING=y
# CONFIG_SPARSE_IRQ is not set
#
# RCU Subsystem
#
CONFIG_TREE_RCU=y
# CONFIG_PREEMPT_RCU is not set
# CONFIG_RCU_TRACE is not set
CONFIG_RCU_FANOUT=64
# CONFIG_RCU_FANOUT_EXACT is not set
# CONFIG_RCU_FAST_NO_HZ is not set
# CONFIG_TREE_RCU_TRACE is not set
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
CONFIG_LOG_BUF_SHIFT=15
CONFIG_HAVE_UNSTABLE_SCHED_CLOCK=y
CONFIG_CGROUPS=y
# CONFIG_CGROUP_DEBUG is not set
# CONFIG_CGROUP_FREEZER is not set
# CONFIG_CGROUP_DEVICE is not set
# CONFIG_CPUSETS is not set
# CONFIG_CGROUP_CPUACCT is not set
# CONFIG_RESOURCE_COUNTERS is not set
# CONFIG_CGROUP_PERF is not set
CONFIG_CGROUP_SCHED=y
CONFIG_FAIR_GROUP_SCHED=y
# CONFIG_RT_GROUP_SCHED is not set
CONFIG_BLK_CGROUP=y
# CONFIG_DEBUG_BLK_CGROUP is not set
CONFIG_NAMESPACES=y
# CONFIG_UTS_NS is not set
# CONFIG_IPC_NS is not set
# CONFIG_USER_NS is not set
# CONFIG_PID_NS is not set
# CONFIG_NET_NS is not set
CONFIG_SCHED_AUTOGROUP=y
# CONFIG_SYSFS_DEPRECATED is not set
# CONFIG_RELAY is not set
# CONFIG_BLK_DEV_INITRD is not set
CONFIG_CC_OPTIMIZE_FOR_SIZE=y
CONFIG_SYSCTL=y
CONFIG_ANON_INODES=y
# CONFIG_EXPERT is not set
CONFIG_UID16=y
CONFIG_SYSCTL_SYSCALL=y
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_ALL is not set
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
CONFIG_PCSPKR_PLATFORM=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_EPOLL=y
CONFIG_SIGNALFD=y
CONFIG_TIMERFD=y
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
CONFIG_AIO=y
# CONFIG_EMBEDDED is not set
CONFIG_HAVE_PERF_EVENTS=y
#
# Kernel Performance Events And Counters
#
CONFIG_PERF_EVENTS=y
# CONFIG_PERF_COUNTERS is not set
# CONFIG_DEBUG_PERF_USE_VMALLOC is not set
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_PCI_QUIRKS=y
CONFIG_SLUB_DEBUG=y
# CONFIG_COMPAT_BRK is not set
# CONFIG_SLAB is not set
CONFIG_SLUB=y
# CONFIG_PROFILING is not set
CONFIG_HAVE_OPROFILE=y
# CONFIG_KPROBES is not set
# CONFIG_JUMP_LABEL is not set
CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
CONFIG_HAVE_IOREMAP_PROT=y
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_OPTPROBES=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
CONFIG_HAVE_DMA_ATTRS=y
CONFIG_USE_GENERIC_SMP_HELPERS=y
CONFIG_HAVE_REGS_AND_STACK_ACCESS_API=y
CONFIG_HAVE_DMA_API_DEBUG=y
CONFIG_HAVE_HW_BREAKPOINT=y
CONFIG_HAVE_MIXED_BREAKPOINTS_REGS=y
CONFIG_HAVE_USER_RETURN_NOTIFIER=y
CONFIG_HAVE_PERF_EVENTS_NMI=y
CONFIG_HAVE_ARCH_JUMP_LABEL=y
#
# GCOV-based kernel profiling
#
# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
# CONFIG_MODULE_FORCE_LOAD is not set
CONFIG_MODULE_UNLOAD=y
CONFIG_MODULE_FORCE_UNLOAD=y
CONFIG_MODVERSIONS=y
# CONFIG_MODULE_SRCVERSION_ALL is not set
CONFIG_STOP_MACHINE=y
CONFIG_BLOCK=y
CONFIG_BLK_DEV_BSG=y
# CONFIG_BLK_DEV_INTEGRITY is not set
# CONFIG_BLK_DEV_THROTTLING is not set
CONFIG_BLOCK_COMPAT=y
#
# IO Schedulers
#
CONFIG_IOSCHED_NOOP=y
CONFIG_IOSCHED_DEADLINE=m
CONFIG_IOSCHED_CFQ=y
CONFIG_CFQ_GROUP_IOSCHED=y
CONFIG_DEFAULT_CFQ=y
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="cfq"
# CONFIG_INLINE_SPIN_TRYLOCK is not set
# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
# CONFIG_INLINE_SPIN_LOCK is not set
# CONFIG_INLINE_SPIN_LOCK_BH is not set
# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
CONFIG_INLINE_SPIN_UNLOCK=y
# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
CONFIG_INLINE_SPIN_UNLOCK_IRQ=y
# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
# CONFIG_INLINE_READ_TRYLOCK is not set
# CONFIG_INLINE_READ_LOCK is not set
# CONFIG_INLINE_READ_LOCK_BH is not set
# CONFIG_INLINE_READ_LOCK_IRQ is not set
# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
CONFIG_INLINE_READ_UNLOCK=y
# CONFIG_INLINE_READ_UNLOCK_BH is not set
CONFIG_INLINE_READ_UNLOCK_IRQ=y
# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
# CONFIG_INLINE_WRITE_TRYLOCK is not set
# CONFIG_INLINE_WRITE_LOCK is not set
# CONFIG_INLINE_WRITE_LOCK_BH is not set
# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
CONFIG_INLINE_WRITE_UNLOCK=y
# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
CONFIG_INLINE_WRITE_UNLOCK_IRQ=y
# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
CONFIG_MUTEX_SPIN_ON_OWNER=y
# CONFIG_FREEZER is not set
#
# Processor type and features
#
CONFIG_TICK_ONESHOT=y
CONFIG_NO_HZ=y
CONFIG_HIGH_RES_TIMERS=y
CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
CONFIG_SMP=y
CONFIG_X86_MPPARSE=y
# CONFIG_X86_EXTENDED_PLATFORM is not set
CONFIG_X86_SUPPORTS_MEMORY_FAILURE=y
CONFIG_SCHED_OMIT_FRAME_POINTER=y
# CONFIG_PARAVIRT_GUEST is not set
CONFIG_NO_BOOTMEM=y
# CONFIG_MEMTEST is not set
# CONFIG_MK8 is not set
# CONFIG_MPSC is not set
# CONFIG_MCORE2 is not set
# CONFIG_MATOM is not set
CONFIG_GENERIC_CPU=y
CONFIG_X86_INTERNODE_CACHE_SHIFT=6
CONFIG_X86_CMPXCHG=y
CONFIG_CMPXCHG_LOCAL=y
CONFIG_X86_L1_CACHE_SHIFT=6
CONFIG_X86_XADD=y
CONFIG_X86_WP_WORKS_OK=y
CONFIG_X86_TSC=y
CONFIG_X86_CMPXCHG64=y
CONFIG_X86_CMOV=y
CONFIG_X86_MINIMUM_CPU_FAMILY=64
CONFIG_X86_DEBUGCTLMSR=y
CONFIG_CPU_SUP_INTEL=y
CONFIG_CPU_SUP_AMD=y
CONFIG_CPU_SUP_CENTAUR=y
CONFIG_HPET_TIMER=y
CONFIG_HPET_EMULATE_RTC=y
CONFIG_DMI=y
CONFIG_GART_IOMMU=y
# CONFIG_CALGARY_IOMMU is not set
# CONFIG_AMD_IOMMU is not set
CONFIG_SWIOTLB=y
CONFIG_IOMMU_HELPER=y
# CONFIG_IOMMU_API is not set
# CONFIG_MAXSMP is not set
CONFIG_NR_CPUS=8
CONFIG_SCHED_SMT=y
CONFIG_SCHED_MC=y
# CONFIG_IRQ_TIME_ACCOUNTING is not set
# CONFIG_PREEMPT_NONE is not set
CONFIG_PREEMPT_VOLUNTARY=y
# CONFIG_PREEMPT is not set
CONFIG_X86_LOCAL_APIC=y
CONFIG_X86_IO_APIC=y
# CONFIG_X86_REROUTE_FOR_BROKEN_BOOT_IRQS is not set
CONFIG_X86_MCE=y
CONFIG_X86_MCE_INTEL=y
CONFIG_X86_MCE_AMD=y
CONFIG_X86_MCE_THRESHOLD=y
# CONFIG_X86_MCE_INJECT is not set
CONFIG_X86_THERMAL_VECTOR=y
# CONFIG_I8K is not set
# CONFIG_MICROCODE is not set
CONFIG_X86_MSR=y
CONFIG_X86_CPUID=y
CONFIG_ARCH_PHYS_ADDR_T_64BIT=y
CONFIG_ARCH_DMA_ADDR_T_64BIT=y
CONFIG_DIRECT_GBPAGES=y
# CONFIG_NUMA is not set
CONFIG_ARCH_SPARSEMEM_ENABLE=y
CONFIG_ARCH_SPARSEMEM_DEFAULT=y
CONFIG_ARCH_SELECT_MEMORY_MODEL=y
CONFIG_ILLEGAL_POINTER_VALUE=0xdead000000000000
CONFIG_SELECT_MEMORY_MODEL=y
CONFIG_SPARSEMEM_MANUAL=y
CONFIG_SPARSEMEM=y
CONFIG_HAVE_MEMORY_PRESENT=y
CONFIG_SPARSEMEM_EXTREME=y
CONFIG_SPARSEMEM_VMEMMAP_ENABLE=y
CONFIG_SPARSEMEM_ALLOC_MEM_MAP_TOGETHER=y
CONFIG_SPARSEMEM_VMEMMAP=y
CONFIG_HAVE_MEMBLOCK=y
# CONFIG_MEMORY_HOTPLUG is not set
CONFIG_PAGEFLAGS_EXTENDED=y
CONFIG_SPLIT_PTLOCK_CPUS=4
# CONFIG_COMPACTION is not set
CONFIG_PHYS_ADDR_T_64BIT=y
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
# CONFIG_KSM is not set
CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
CONFIG_ARCH_SUPPORTS_MEMORY_FAILURE=y
# CONFIG_MEMORY_FAILURE is not set
# CONFIG_TRANSPARENT_HUGEPAGE is not set
# CONFIG_CLEANCACHE is not set
# CONFIG_X86_CHECK_BIOS_CORRUPTION is not set
CONFIG_X86_RESERVE_LOW=64
CONFIG_MTRR=y
# CONFIG_MTRR_SANITIZER is not set
CONFIG_X86_PAT=y
CONFIG_ARCH_USES_PG_UNCACHED=y
# CONFIG_EFI is not set
CONFIG_SECCOMP=y
# CONFIG_CC_STACKPROTECTOR is not set
# CONFIG_HZ_100 is not set
# CONFIG_HZ_250 is not set
# CONFIG_HZ_300 is not set
CONFIG_HZ_1000=y
CONFIG_HZ=1000
CONFIG_SCHED_HRTICK=y
# CONFIG_KEXEC is not set
# CONFIG_CRASH_DUMP is not set
CONFIG_PHYSICAL_START=0x1000000
# CONFIG_RELOCATABLE is not set
CONFIG_PHYSICAL_ALIGN=0x1000000
CONFIG_HOTPLUG_CPU=y
CONFIG_COMPAT_VDSO=y
# CONFIG_CMDLINE_BOOL is not set
CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
#
# Power management and ACPI options
#
# CONFIG_SUSPEND is not set
# CONFIG_HIBERNATION is not set
# CONFIG_PM_RUNTIME is not set
CONFIG_ACPI=y
CONFIG_ACPI_PROCFS=y
# CONFIG_ACPI_PROCFS_POWER is not set
# CONFIG_ACPI_EC_DEBUGFS is not set
CONFIG_ACPI_PROC_EVENT=y
# CONFIG_ACPI_AC is not set
# CONFIG_ACPI_BATTERY is not set
CONFIG_ACPI_BUTTON=y
# CONFIG_ACPI_FAN is not set
CONFIG_ACPI_DOCK=y
CONFIG_ACPI_PROCESSOR=y
CONFIG_ACPI_HOTPLUG_CPU=y
# CONFIG_ACPI_PROCESSOR_AGGREGATOR is not set
CONFIG_ACPI_THERMAL=y
# CONFIG_ACPI_CUSTOM_DSDT is not set
CONFIG_ACPI_BLACKLIST_YEAR=0
# CONFIG_ACPI_DEBUG is not set
# CONFIG_ACPI_PCI_SLOT is not set
CONFIG_X86_PM_TIMER=y
CONFIG_ACPI_CONTAINER=y
# CONFIG_ACPI_SBS is not set
# CONFIG_ACPI_HED is not set
# CONFIG_ACPI_APEI is not set
# CONFIG_SFI is not set
#
# CPU Frequency scaling
#
CONFIG_CPU_FREQ=y
CONFIG_CPU_FREQ_TABLE=y
# CONFIG_CPU_FREQ_STAT is not set
# CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE is not set
# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set
CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND=y
# CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set
CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
CONFIG_CPU_FREQ_GOV_POWERSAVE=m
CONFIG_CPU_FREQ_GOV_USERSPACE=m
CONFIG_CPU_FREQ_GOV_ONDEMAND=y
CONFIG_CPU_FREQ_GOV_CONSERVATIVE=m
#
# x86 CPU frequency scaling drivers
#
CONFIG_X86_PCC_CPUFREQ=m
CONFIG_X86_ACPI_CPUFREQ=m
# CONFIG_X86_POWERNOW_K8 is not set
# CONFIG_X86_SPEEDSTEP_CENTRINO is not set
# CONFIG_X86_P4_CLOCKMOD is not set
#
# shared options
#
# CONFIG_X86_SPEEDSTEP_LIB is not set
CONFIG_CPU_IDLE=y
CONFIG_CPU_IDLE_GOV_LADDER=y
CONFIG_CPU_IDLE_GOV_MENU=y
CONFIG_INTEL_IDLE=y
#
# Memory power savings
#
CONFIG_I7300_IDLE_IOAT_CHANNEL=y
CONFIG_I7300_IDLE=m
#
# Bus options (PCI etc.)
#
CONFIG_PCI=y
CONFIG_PCI_DIRECT=y
CONFIG_PCI_MMCONFIG=y
CONFIG_PCI_DOMAINS=y
# CONFIG_PCI_CNB20LE_QUIRK is not set
# CONFIG_DMAR is not set
# CONFIG_INTR_REMAP is not set
CONFIG_PCIEPORTBUS=y
# CONFIG_PCIEAER is not set
CONFIG_PCIEASPM=y
# CONFIG_PCIEASPM_DEBUG is not set
CONFIG_ARCH_SUPPORTS_MSI=y
CONFIG_PCI_MSI=y
# CONFIG_PCI_DEBUG is not set
# CONFIG_PCI_STUB is not set
CONFIG_HT_IRQ=y
# CONFIG_PCI_IOV is not set
CONFIG_PCI_IOAPIC=y
CONFIG_PCI_LABEL=y
CONFIG_ISA_DMA_API=y
CONFIG_AMD_NB=y
# CONFIG_PCCARD is not set
# CONFIG_HOTPLUG_PCI is not set
# CONFIG_RAPIDIO is not set
#
# Executable file formats / Emulations
#
CONFIG_BINFMT_ELF=y
CONFIG_COMPAT_BINFMT_ELF=y
# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
# CONFIG_HAVE_AOUT is not set
CONFIG_BINFMT_MISC=m
CONFIG_IA32_EMULATION=y
CONFIG_IA32_AOUT=m
CONFIG_COMPAT=y
CONFIG_COMPAT_FOR_U64_ALIGNMENT=y
CONFIG_SYSVIPC_COMPAT=y
CONFIG_HAVE_TEXT_POKE_SMP=y
CONFIG_NET=y
#
# Networking options
#
CONFIG_PACKET=y
CONFIG_UNIX=y
# CONFIG_NET_KEY is not set
CONFIG_INET=y
# CONFIG_IP_MULTICAST is not set
# CONFIG_IP_ADVANCED_ROUTER is not set
CONFIG_IP_ROUTE_CLASSID=y
# CONFIG_IP_PNP is not set
# CONFIG_NET_IPIP is not set
# CONFIG_NET_IPGRE_DEMUX is not set
# CONFIG_ARPD is not set
CONFIG_SYN_COOKIES=y
# CONFIG_INET_AH is not set
# CONFIG_INET_ESP is not set
# CONFIG_INET_IPCOMP is not set
# CONFIG_INET_XFRM_TUNNEL is not set
# CONFIG_INET_TUNNEL is not set
# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
# CONFIG_INET_XFRM_MODE_TUNNEL is not set
# CONFIG_INET_XFRM_MODE_BEET is not set
CONFIG_INET_LRO=y
CONFIG_INET_DIAG=m
CONFIG_INET_TCP_DIAG=m
# CONFIG_TCP_CONG_ADVANCED is not set
CONFIG_TCP_CONG_CUBIC=y
CONFIG_DEFAULT_TCP_CONG="cubic"
# CONFIG_TCP_MD5SIG is not set
# CONFIG_IPV6 is not set
# CONFIG_NETWORK_SECMARK is not set
# CONFIG_NETWORK_PHY_TIMESTAMPING is not set
CONFIG_NETFILTER=y
# CONFIG_NETFILTER_DEBUG is not set
CONFIG_NETFILTER_ADVANCED=y
#
# Core Netfilter Configuration
#
CONFIG_NETFILTER_NETLINK=m
CONFIG_NETFILTER_NETLINK_QUEUE=m
CONFIG_NETFILTER_NETLINK_LOG=m
CONFIG_NF_CONNTRACK=m
CONFIG_NF_CONNTRACK_MARK=y
CONFIG_NF_CONNTRACK_EVENTS=y
CONFIG_NF_CONNTRACK_TIMESTAMP=y
# CONFIG_NF_CT_PROTO_DCCP is not set
# CONFIG_NF_CT_PROTO_SCTP is not set
# CONFIG_NF_CT_PROTO_UDPLITE is not set
# CONFIG_NF_CONNTRACK_AMANDA is not set
CONFIG_NF_CONNTRACK_FTP=m
# CONFIG_NF_CONNTRACK_H323 is not set
CONFIG_NF_CONNTRACK_IRC=m
CONFIG_NF_CONNTRACK_BROADCAST=m
# CONFIG_NF_CONNTRACK_NETBIOS_NS is not set
CONFIG_NF_CONNTRACK_SNMP=m
# CONFIG_NF_CONNTRACK_PPTP is not set
# CONFIG_NF_CONNTRACK_SANE is not set
# CONFIG_NF_CONNTRACK_SIP is not set
# CONFIG_NF_CONNTRACK_TFTP is not set
CONFIG_NF_CT_NETLINK=m
# CONFIG_NETFILTER_TPROXY is not set
CONFIG_NETFILTER_XTABLES=m
#
# Xtables combined modules
#
CONFIG_NETFILTER_XT_MARK=m
CONFIG_NETFILTER_XT_CONNMARK=m
#
# Xtables targets
#
CONFIG_NETFILTER_XT_TARGET_CHECKSUM=m
CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m
CONFIG_NETFILTER_XT_TARGET_CONNMARK=m
# CONFIG_NETFILTER_XT_TARGET_CT is not set
CONFIG_NETFILTER_XT_TARGET_DSCP=m
CONFIG_NETFILTER_XT_TARGET_HL=m
CONFIG_NETFILTER_XT_TARGET_IDLETIMER=m
CONFIG_NETFILTER_XT_TARGET_MARK=m
CONFIG_NETFILTER_XT_TARGET_NFLOG=m
CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m
# CONFIG_NETFILTER_XT_TARGET_NOTRACK is not set
CONFIG_NETFILTER_XT_TARGET_RATEEST=m
CONFIG_NETFILTER_XT_TARGET_TEE=m
# CONFIG_NETFILTER_XT_TARGET_TRACE is not set
CONFIG_NETFILTER_XT_TARGET_TCPMSS=m
CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP=m
#
# Xtables matches
#
CONFIG_NETFILTER_XT_MATCH_ADDRTYPE=m
CONFIG_NETFILTER_XT_MATCH_CLUSTER=m
CONFIG_NETFILTER_XT_MATCH_COMMENT=m
CONFIG_NETFILTER_XT_MATCH_CONNBYTES=m
CONFIG_NETFILTER_XT_MATCH_CONNLIMIT=m
CONFIG_NETFILTER_XT_MATCH_CONNMARK=m
CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m
CONFIG_NETFILTER_XT_MATCH_CPU=m
CONFIG_NETFILTER_XT_MATCH_DCCP=m
CONFIG_NETFILTER_XT_MATCH_DEVGROUP=m
CONFIG_NETFILTER_XT_MATCH_DSCP=m
CONFIG_NETFILTER_XT_MATCH_ESP=m
CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m
CONFIG_NETFILTER_XT_MATCH_HELPER=m
CONFIG_NETFILTER_XT_MATCH_HL=m
CONFIG_NETFILTER_XT_MATCH_IPRANGE=m
CONFIG_NETFILTER_XT_MATCH_LENGTH=m
CONFIG_NETFILTER_XT_MATCH_LIMIT=m
CONFIG_NETFILTER_XT_MATCH_MAC=m
CONFIG_NETFILTER_XT_MATCH_MARK=m
CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m
CONFIG_NETFILTER_XT_MATCH_OSF=m
CONFIG_NETFILTER_XT_MATCH_OWNER=m
CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m
CONFIG_NETFILTER_XT_MATCH_QUOTA=m
CONFIG_NETFILTER_XT_MATCH_RATEEST=m
CONFIG_NETFILTER_XT_MATCH_REALM=m
CONFIG_NETFILTER_XT_MATCH_RECENT=m
CONFIG_NETFILTER_XT_MATCH_SCTP=m
CONFIG_NETFILTER_XT_MATCH_STATE=m
CONFIG_NETFILTER_XT_MATCH_STATISTIC=m
CONFIG_NETFILTER_XT_MATCH_STRING=m
CONFIG_NETFILTER_XT_MATCH_TCPMSS=m
CONFIG_NETFILTER_XT_MATCH_TIME=m
CONFIG_NETFILTER_XT_MATCH_U32=m
# CONFIG_IP_SET is not set
# CONFIG_IP_VS is not set
#
# IP: Netfilter Configuration
#
CONFIG_NF_DEFRAG_IPV4=m
CONFIG_NF_CONNTRACK_IPV4=m
# CONFIG_NF_CONNTRACK_PROC_COMPAT is not set
# CONFIG_IP_NF_QUEUE is not set
CONFIG_IP_NF_IPTABLES=m
CONFIG_IP_NF_MATCH_AH=m
CONFIG_IP_NF_MATCH_ECN=m
CONFIG_IP_NF_MATCH_TTL=m
CONFIG_IP_NF_FILTER=m
CONFIG_IP_NF_TARGET_REJECT=m
CONFIG_IP_NF_TARGET_LOG=m
CONFIG_IP_NF_TARGET_ULOG=m
CONFIG_NF_NAT=m
CONFIG_NF_NAT_NEEDED=y
CONFIG_IP_NF_TARGET_MASQUERADE=m
CONFIG_IP_NF_TARGET_NETMAP=m
CONFIG_IP_NF_TARGET_REDIRECT=m
# CONFIG_NF_NAT_SNMP_BASIC is not set
CONFIG_NF_NAT_FTP=m
CONFIG_NF_NAT_IRC=m
# CONFIG_NF_NAT_TFTP is not set
# CONFIG_NF_NAT_AMANDA is not set
# CONFIG_NF_NAT_PPTP is not set
# CONFIG_NF_NAT_H323 is not set
# CONFIG_NF_NAT_SIP is not set
CONFIG_IP_NF_MANGLE=m
# CONFIG_IP_NF_TARGET_CLUSTERIP is not set
CONFIG_IP_NF_TARGET_ECN=m
CONFIG_IP_NF_TARGET_TTL=m
CONFIG_IP_NF_RAW=m
CONFIG_IP_NF_ARPTABLES=m
CONFIG_IP_NF_ARPFILTER=m
CONFIG_IP_NF_ARP_MANGLE=m
# CONFIG_IP_DCCP is not set
# CONFIG_IP_SCTP is not set
# CONFIG_RDS is not set
# CONFIG_TIPC is not set
# CONFIG_ATM is not set
# CONFIG_L2TP is not set
# CONFIG_BRIDGE is not set
# CONFIG_NET_DSA is not set
# CONFIG_VLAN_8021Q is not set
# CONFIG_DECNET is not set
# CONFIG_LLC2 is not set
# CONFIG_IPX is not set
# CONFIG_ATALK is not set
# CONFIG_X25 is not set
# CONFIG_LAPB is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
# CONFIG_PHONET is not set
# CONFIG_IEEE802154 is not set
CONFIG_NET_SCHED=y
#
# Queueing/Scheduling
#
CONFIG_NET_SCH_CBQ=m
CONFIG_NET_SCH_HTB=m
CONFIG_NET_SCH_HFSC=m
CONFIG_NET_SCH_PRIO=m
CONFIG_NET_SCH_MULTIQ=m
CONFIG_NET_SCH_RED=m
CONFIG_NET_SCH_SFB=m
CONFIG_NET_SCH_SFQ=m
CONFIG_NET_SCH_TEQL=m
CONFIG_NET_SCH_TBF=m
CONFIG_NET_SCH_GRED=m
CONFIG_NET_SCH_DSMARK=m
CONFIG_NET_SCH_NETEM=m
CONFIG_NET_SCH_DRR=m
CONFIG_NET_SCH_MQPRIO=m
CONFIG_NET_SCH_CHOKE=m
# CONFIG_NET_SCH_QFQ is not set
#
# Classification
#
CONFIG_NET_CLS=y
CONFIG_NET_CLS_BASIC=m
# CONFIG_NET_CLS_TCINDEX is not set
# CONFIG_NET_CLS_ROUTE4 is not set
CONFIG_NET_CLS_FW=m
# CONFIG_NET_CLS_U32 is not set
# CONFIG_NET_CLS_RSVP is not set
# CONFIG_NET_CLS_RSVP6 is not set
CONFIG_NET_CLS_FLOW=m
# CONFIG_NET_CLS_CGROUP is not set
# CONFIG_NET_EMATCH is not set
# CONFIG_NET_CLS_ACT is not set
# CONFIG_NET_CLS_IND is not set
CONFIG_NET_SCH_FIFO=y
# CONFIG_DCB is not set
# CONFIG_BATMAN_ADV is not set
CONFIG_RPS=y
CONFIG_RFS_ACCEL=y
CONFIG_XPS=y
CONFIG_HAVE_BPF_JIT=y
# CONFIG_BPF_JIT is not set
#
# Network testing
#
# CONFIG_NET_PKTGEN is not set
# CONFIG_HAMRADIO is not set
# CONFIG_CAN is not set
# CONFIG_IRDA is not set
# CONFIG_BT is not set
# CONFIG_AF_RXRPC is not set
# CONFIG_WIRELESS is not set
# CONFIG_WIMAX is not set
# CONFIG_RFKILL is not set
# CONFIG_NET_9P is not set
# CONFIG_CAIF is not set
# CONFIG_CEPH_LIB is not set
#
# Device Drivers
#
#
# Generic Driver Options
#
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
CONFIG_DEVTMPFS=y
CONFIG_DEVTMPFS_MOUNT=y
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
CONFIG_FW_LOADER=y
CONFIG_FIRMWARE_IN_KERNEL=y
CONFIG_EXTRA_FIRMWARE=""
# CONFIG_DEBUG_DRIVER is not set
# CONFIG_DEBUG_DEVRES is not set
# CONFIG_SYS_HYPERVISOR is not set
CONFIG_CONNECTOR=y
CONFIG_PROC_EVENTS=y
# CONFIG_MTD is not set
# CONFIG_PARPORT is not set
CONFIG_PNP=y
# CONFIG_PNP_DEBUG_MESSAGES is not set
#
# Protocols
#
CONFIG_PNPACPI=y
CONFIG_BLK_DEV=y
# CONFIG_BLK_DEV_FD is not set
# CONFIG_BLK_CPQ_DA is not set
# CONFIG_BLK_CPQ_CISS_DA is not set
# CONFIG_BLK_DEV_DAC960 is not set
# CONFIG_BLK_DEV_UMEM is not set
# CONFIG_BLK_DEV_COW_COMMON is not set
CONFIG_BLK_DEV_LOOP=m
CONFIG_BLK_DEV_CRYPTOLOOP=m
# CONFIG_BLK_DEV_DRBD is not set
# CONFIG_BLK_DEV_NBD is not set
# CONFIG_BLK_DEV_SX8 is not set
# CONFIG_BLK_DEV_UB is not set
# CONFIG_BLK_DEV_RAM is not set
CONFIG_CDROM_PKTCDVD=m
CONFIG_CDROM_PKTCDVD_BUFFERS=8
# CONFIG_CDROM_PKTCDVD_WCACHE is not set
# CONFIG_ATA_OVER_ETH is not set
# CONFIG_BLK_DEV_HD is not set
# CONFIG_BLK_DEV_RBD is not set
# CONFIG_SENSORS_LIS3LV02D is not set
# CONFIG_MISC_DEVICES is not set
CONFIG_HAVE_IDE=y
# CONFIG_IDE is not set
#
# SCSI device support
#
CONFIG_SCSI_MOD=y
# CONFIG_RAID_ATTRS is not set
CONFIG_SCSI=y
CONFIG_SCSI_DMA=y
# CONFIG_SCSI_TGT is not set
# CONFIG_SCSI_NETLINK is not set
CONFIG_SCSI_PROC_FS=y
#
# SCSI support type (disk, tape, CD-ROM)
#
CONFIG_BLK_DEV_SD=y
# CONFIG_CHR_DEV_ST is not set
# CONFIG_CHR_DEV_OSST is not set
CONFIG_BLK_DEV_SR=m
# CONFIG_BLK_DEV_SR_VENDOR is not set
CONFIG_CHR_DEV_SG=y
# CONFIG_CHR_DEV_SCH is not set
CONFIG_SCSI_MULTI_LUN=y
CONFIG_SCSI_CONSTANTS=y
CONFIG_SCSI_LOGGING=y
# CONFIG_SCSI_SCAN_ASYNC is not set
CONFIG_SCSI_WAIT_SCAN=m
#
# SCSI Transports
#
# CONFIG_SCSI_SPI_ATTRS is not set
# CONFIG_SCSI_FC_ATTRS is not set
# CONFIG_SCSI_ISCSI_ATTRS is not set
# CONFIG_SCSI_SAS_ATTRS is not set
# CONFIG_SCSI_SAS_LIBSAS is not set
# CONFIG_SCSI_SRP_ATTRS is not set
# CONFIG_SCSI_LOWLEVEL is not set
# CONFIG_SCSI_DH is not set
# CONFIG_SCSI_OSD_INITIATOR is not set
CONFIG_ATA=y
# CONFIG_ATA_NONSTANDARD is not set
CONFIG_ATA_VERBOSE_ERROR=y
CONFIG_ATA_ACPI=y
# CONFIG_SATA_PMP is not set
#
# Controllers with non-SFF native interface
#
CONFIG_SATA_AHCI=y
# CONFIG_SATA_AHCI_PLATFORM is not set
# CONFIG_SATA_INIC162X is not set
# CONFIG_SATA_ACARD_AHCI is not set
# CONFIG_SATA_SIL24 is not set
CONFIG_ATA_SFF=y
#
# SFF controllers with custom DMA interface
#
# CONFIG_PDC_ADMA is not set
# CONFIG_SATA_QSTOR is not set
# CONFIG_SATA_SX4 is not set
CONFIG_ATA_BMDMA=y
#
# SATA SFF controllers with BMDMA
#
CONFIG_ATA_PIIX=y
# CONFIG_SATA_MV is not set
# CONFIG_SATA_NV is not set
# CONFIG_SATA_PROMISE is not set
# CONFIG_SATA_SIL is not set
# CONFIG_SATA_SIS is not set
# CONFIG_SATA_SVW is not set
# CONFIG_SATA_ULI is not set
# CONFIG_SATA_VIA is not set
# CONFIG_SATA_VITESSE is not set
#
# PATA SFF controllers with BMDMA
#
# CONFIG_PATA_ALI is not set
# CONFIG_PATA_AMD is not set
# CONFIG_PATA_ARASAN_CF is not set
# CONFIG_PATA_ARTOP is not set
# CONFIG_PATA_ATIIXP is not set
# CONFIG_PATA_ATP867X is not set
# CONFIG_PATA_CMD64X is not set
# CONFIG_PATA_CS5520 is not set
# CONFIG_PATA_CS5530 is not set
# CONFIG_PATA_CS5536 is not set
# CONFIG_PATA_CYPRESS is not set
# CONFIG_PATA_EFAR is not set
# CONFIG_PATA_HPT366 is not set
# CONFIG_PATA_HPT37X is not set
# CONFIG_PATA_HPT3X2N is not set
# CONFIG_PATA_HPT3X3 is not set
# CONFIG_PATA_IT8213 is not set
# CONFIG_PATA_IT821X is not set
# CONFIG_PATA_JMICRON is not set
# CONFIG_PATA_MARVELL is not set
# CONFIG_PATA_NETCELL is not set
# CONFIG_PATA_NINJA32 is not set
# CONFIG_PATA_NS87415 is not set
# CONFIG_PATA_OLDPIIX is not set
# CONFIG_PATA_OPTIDMA is not set
# CONFIG_PATA_PDC2027X is not set
# CONFIG_PATA_PDC_OLD is not set
# CONFIG_PATA_RADISYS is not set
# CONFIG_PATA_RDC is not set
# CONFIG_PATA_SC1200 is not set
# CONFIG_PATA_SCH is not set
# CONFIG_PATA_SERVERWORKS is not set
# CONFIG_PATA_SIL680 is not set
# CONFIG_PATA_SIS is not set
# CONFIG_PATA_TOSHIBA is not set
# CONFIG_PATA_TRIFLEX is not set
# CONFIG_PATA_VIA is not set
# CONFIG_PATA_WINBOND is not set
#
# PIO-only SFF controllers
#
# CONFIG_PATA_CMD640_PCI is not set
# CONFIG_PATA_MPIIX is not set
# CONFIG_PATA_NS87410 is not set
# CONFIG_PATA_OPTI is not set
# CONFIG_PATA_RZ1000 is not set
#
# Generic fallback / legacy drivers
#
# CONFIG_PATA_ACPI is not set
# CONFIG_ATA_GENERIC is not set
# CONFIG_PATA_LEGACY is not set
# CONFIG_MD is not set
# CONFIG_TARGET_CORE is not set
# CONFIG_FUSION is not set
#
# IEEE 1394 (FireWire) support
#
# CONFIG_FIREWIRE is not set
# CONFIG_FIREWIRE_NOSY is not set
# CONFIG_I2O is not set
# CONFIG_MACINTOSH_DRIVERS is not set
CONFIG_NETDEVICES=y
CONFIG_DUMMY=m
# CONFIG_BONDING is not set
# CONFIG_MACVLAN is not set
# CONFIG_EQUALIZER is not set
CONFIG_TUN=m
# CONFIG_VETH is not set
# CONFIG_NET_SB1000 is not set
# CONFIG_ARCNET is not set
CONFIG_MII=y
CONFIG_PHYLIB=m
#
# MII PHY device drivers
#
# CONFIG_MARVELL_PHY is not set
# CONFIG_DAVICOM_PHY is not set
# CONFIG_QSEMI_PHY is not set
# CONFIG_LXT_PHY is not set
# CONFIG_CICADA_PHY is not set
# CONFIG_VITESSE_PHY is not set
# CONFIG_SMSC_PHY is not set
# CONFIG_BROADCOM_PHY is not set
# CONFIG_BCM63XX_PHY is not set
# CONFIG_ICPLUS_PHY is not set
CONFIG_REALTEK_PHY=m
# CONFIG_NATIONAL_PHY is not set
# CONFIG_STE10XP is not set
# CONFIG_LSI_ET1011C_PHY is not set
# CONFIG_MICREL_PHY is not set
# CONFIG_MDIO_BITBANG is not set
# CONFIG_NET_ETHERNET is not set
CONFIG_NETDEV_1000=y
# CONFIG_ACENIC is not set
# CONFIG_DL2K is not set
# CONFIG_E1000 is not set
# CONFIG_E1000E is not set
# CONFIG_IP1000 is not set
# CONFIG_IGB is not set
# CONFIG_IGBVF is not set
# CONFIG_NS83820 is not set
# CONFIG_HAMACHI is not set
# CONFIG_YELLOWFIN is not set
CONFIG_R8169=y
# CONFIG_SIS190 is not set
# CONFIG_SKGE is not set
# CONFIG_SKY2 is not set
# CONFIG_VIA_VELOCITY is not set
# CONFIG_TIGON3 is not set
# CONFIG_BNX2 is not set
# CONFIG_CNIC is not set
# CONFIG_QLA3XXX is not set
# CONFIG_ATL1 is not set
# CONFIG_ATL1E is not set
# CONFIG_ATL1C is not set
# CONFIG_JME is not set
# CONFIG_STMMAC_ETH is not set
# CONFIG_PCH_GBE is not set
# CONFIG_NETDEV_10000 is not set
# CONFIG_TR is not set
# CONFIG_WLAN is not set
#
# Enable WiMAX (Networking options) to see the WiMAX drivers
#
#
# USB Network Adapters
#
# CONFIG_USB_CATC is not set
# CONFIG_USB_KAWETH is not set
# CONFIG_USB_PEGASUS is not set
# CONFIG_USB_RTL8150 is not set
# CONFIG_USB_USBNET is not set
# CONFIG_USB_IPHETH is not set
# CONFIG_WAN is not set
#
# CAIF transport drivers
#
# CONFIG_FDDI is not set
# CONFIG_HIPPI is not set
# CONFIG_PPP is not set
# CONFIG_SLIP is not set
# CONFIG_NET_FC is not set
# CONFIG_NETCONSOLE is not set
# CONFIG_NETPOLL is not set
# CONFIG_NET_POLL_CONTROLLER is not set
# CONFIG_VMXNET3 is not set
# CONFIG_ISDN is not set
# CONFIG_PHONE is not set
#
# Input device support
#
CONFIG_INPUT=y
# CONFIG_INPUT_FF_MEMLESS is not set
# CONFIG_INPUT_POLLDEV is not set
# CONFIG_INPUT_SPARSEKMAP is not set
#
# Userland interfaces
#
CONFIG_INPUT_MOUSEDEV=y
CONFIG_INPUT_MOUSEDEV_PSAUX=y
CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
# CONFIG_INPUT_JOYDEV is not set
CONFIG_INPUT_EVDEV=m
# CONFIG_INPUT_EVBUG is not set
#
# Input Device Drivers
#
CONFIG_INPUT_KEYBOARD=y
CONFIG_KEYBOARD_ATKBD=y
# CONFIG_KEYBOARD_LKKBD is not set
# CONFIG_KEYBOARD_NEWTON is not set
# CONFIG_KEYBOARD_OPENCORES is not set
# CONFIG_KEYBOARD_STOWAWAY is not set
# CONFIG_KEYBOARD_SUNKBD is not set
# CONFIG_KEYBOARD_XTKBD is not set
CONFIG_INPUT_MOUSE=y
CONFIG_MOUSE_PS2=y
CONFIG_MOUSE_PS2_ALPS=y
CONFIG_MOUSE_PS2_LOGIPS2PP=y
CONFIG_MOUSE_PS2_SYNAPTICS=y
CONFIG_MOUSE_PS2_LIFEBOOK=y
CONFIG_MOUSE_PS2_TRACKPOINT=y
# CONFIG_MOUSE_PS2_ELANTECH is not set
# CONFIG_MOUSE_PS2_SENTELIC is not set
# CONFIG_MOUSE_PS2_TOUCHKIT is not set
# CONFIG_MOUSE_SERIAL is not set
# CONFIG_MOUSE_APPLETOUCH is not set
# CONFIG_MOUSE_BCM5974 is not set
# CONFIG_MOUSE_VSXXXAA is not set
# CONFIG_INPUT_JOYSTICK is not set
# CONFIG_INPUT_TABLET is not set
# CONFIG_INPUT_TOUCHSCREEN is not set
CONFIG_INPUT_MISC=y
# CONFIG_INPUT_AD714X is not set
CONFIG_INPUT_PCSPKR=m
# CONFIG_INPUT_ATLAS_BTNS is not set
# CONFIG_INPUT_ATI_REMOTE is not set
# CONFIG_INPUT_ATI_REMOTE2 is not set
# CONFIG_INPUT_KEYSPAN_REMOTE is not set
# CONFIG_INPUT_POWERMATE is not set
# CONFIG_INPUT_YEALINK is not set
# CONFIG_INPUT_CM109 is not set
# CONFIG_INPUT_UINPUT is not set
# CONFIG_INPUT_ADXL34X is not set
# CONFIG_INPUT_CMA3000 is not set
#
# Hardware I/O ports
#
CONFIG_SERIO=y
CONFIG_SERIO_I8042=y
# CONFIG_SERIO_SERPORT is not set
# CONFIG_SERIO_CT82C710 is not set
# CONFIG_SERIO_PCIPS2 is not set
CONFIG_SERIO_LIBPS2=y
# CONFIG_SERIO_RAW is not set
# CONFIG_SERIO_ALTERA_PS2 is not set
# CONFIG_SERIO_PS2MULT is not set
# CONFIG_GAMEPORT is not set
#
# Character devices
#
CONFIG_VT=y
CONFIG_CONSOLE_TRANSLATIONS=y
CONFIG_VT_CONSOLE=y
CONFIG_HW_CONSOLE=y
# CONFIG_VT_HW_CONSOLE_BINDING is not set
CONFIG_UNIX98_PTYS=y
# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
# CONFIG_LEGACY_PTYS is not set
# CONFIG_SERIAL_NONSTANDARD is not set
# CONFIG_NOZOMI is not set
# CONFIG_N_GSM is not set
# CONFIG_TRACE_SINK is not set
CONFIG_DEVKMEM=y
#
# Serial drivers
#
# CONFIG_SERIAL_8250 is not set
CONFIG_FIX_EARLYCON_MEM=y
#
# Non-8250 serial port support
#
# CONFIG_SERIAL_MFD_HSU is not set
# CONFIG_SERIAL_JSM is not set
# CONFIG_SERIAL_TIMBERDALE is not set
# CONFIG_SERIAL_ALTERA_JTAGUART is not set
# CONFIG_SERIAL_ALTERA_UART is not set
# CONFIG_SERIAL_PCH_UART is not set
# CONFIG_SERIAL_XILINX_PS_UART is not set
# CONFIG_IPMI_HANDLER is not set
# CONFIG_HW_RANDOM is not set
# CONFIG_NVRAM is not set
# CONFIG_R3964 is not set
# CONFIG_APPLICOM is not set
# CONFIG_MWAVE is not set
# CONFIG_RAW_DRIVER is not set
CONFIG_HPET=y
CONFIG_HPET_MMAP=y
CONFIG_HANGCHECK_TIMER=m
# CONFIG_TCG_TPM is not set
# CONFIG_TELCLOCK is not set
CONFIG_DEVPORT=y
# CONFIG_RAMOOPS is not set
# CONFIG_I2C is not set
# CONFIG_SPI is not set
#
# PPS support
#
# CONFIG_PPS is not set
#
# PPS generators support
#
#
# PTP clock support
#
#
# Enable Device Drivers -> PPS to see the PTP clock options.
#
CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
# CONFIG_GPIOLIB is not set
# CONFIG_W1 is not set
CONFIG_POWER_SUPPLY=y
# CONFIG_POWER_SUPPLY_DEBUG is not set
# CONFIG_PDA_POWER is not set
# CONFIG_TEST_POWER is not set
# CONFIG_BATTERY_DS2780 is not set
# CONFIG_BATTERY_BQ27x00 is not set
# CONFIG_CHARGER_MAX8903 is not set
# CONFIG_HWMON is not set
CONFIG_THERMAL=y
# CONFIG_WATCHDOG is not set
CONFIG_SSB_POSSIBLE=y
#
# Sonics Silicon Backplane
#
# CONFIG_SSB is not set
CONFIG_BCMA_POSSIBLE=y
#
# Broadcom specific AMBA
#
# CONFIG_BCMA is not set
# CONFIG_MFD_SUPPORT is not set
# CONFIG_REGULATOR is not set
# CONFIG_MEDIA_SUPPORT is not set
#
# Graphics support
#
CONFIG_AGP=y
CONFIG_AGP_AMD64=y
# CONFIG_AGP_INTEL is not set
# CONFIG_AGP_SIS is not set
# CONFIG_AGP_VIA is not set
CONFIG_VGA_ARB=y
CONFIG_VGA_ARB_MAX_GPUS=16
# CONFIG_VGA_SWITCHEROO is not set
# CONFIG_DRM is not set
# CONFIG_STUB_POULSBO is not set
# CONFIG_VGASTATE is not set
# CONFIG_VIDEO_OUTPUT_CONTROL is not set
CONFIG_FB=y
# CONFIG_FIRMWARE_EDID is not set
# CONFIG_FB_DDC is not set
CONFIG_FB_BOOT_VESA_SUPPORT=y
CONFIG_FB_CFB_FILLRECT=y
CONFIG_FB_CFB_COPYAREA=y
CONFIG_FB_CFB_IMAGEBLIT=y
# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
# CONFIG_FB_SYS_FILLRECT is not set
# CONFIG_FB_SYS_COPYAREA is not set
# CONFIG_FB_SYS_IMAGEBLIT is not set
# CONFIG_FB_FOREIGN_ENDIAN is not set
# CONFIG_FB_SYS_FOPS is not set
# CONFIG_FB_WMT_GE_ROPS is not set
# CONFIG_FB_SVGALIB is not set
# CONFIG_FB_MACMODES is not set
# CONFIG_FB_BACKLIGHT is not set
CONFIG_FB_MODE_HELPERS=y
# CONFIG_FB_TILEBLITTING is not set
#
# Frame buffer hardware drivers
#
# CONFIG_FB_CIRRUS is not set
# CONFIG_FB_PM2 is not set
# CONFIG_FB_CYBER2000 is not set
# CONFIG_FB_ARC is not set
# CONFIG_FB_ASILIANT is not set
# CONFIG_FB_IMSTT is not set
# CONFIG_FB_VGA16 is not set
# CONFIG_FB_UVESA is not set
CONFIG_FB_VESA=y
# CONFIG_FB_N411 is not set
# CONFIG_FB_HGA is not set
# CONFIG_FB_S1D13XXX is not set
# CONFIG_FB_NVIDIA is not set
# CONFIG_FB_RIVA is not set
# CONFIG_FB_LE80578 is not set
# CONFIG_FB_MATROX is not set
# CONFIG_FB_RADEON is not set
# CONFIG_FB_ATY128 is not set
# CONFIG_FB_ATY is not set
# CONFIG_FB_S3 is not set
# CONFIG_FB_SAVAGE is not set
# CONFIG_FB_SIS is not set
# CONFIG_FB_VIA is not set
# CONFIG_FB_NEOMAGIC is not set
# CONFIG_FB_KYRO is not set
# CONFIG_FB_3DFX is not set
# CONFIG_FB_VOODOO1 is not set
# CONFIG_FB_VT8623 is not set
# CONFIG_FB_TRIDENT is not set
# CONFIG_FB_ARK is not set
# CONFIG_FB_PM3 is not set
# CONFIG_FB_CARMINE is not set
# CONFIG_FB_GEODE is not set
# CONFIG_FB_UDL is not set
# CONFIG_FB_VIRTUAL is not set
# CONFIG_FB_METRONOME is not set
# CONFIG_FB_MB862XX is not set
# CONFIG_FB_BROADSHEET is not set
# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
#
# Display device support
#
# CONFIG_DISPLAY_SUPPORT is not set
#
# Console display driver support
#
CONFIG_VGA_CONSOLE=y
CONFIG_VGACON_SOFT_SCROLLBACK=y
CONFIG_VGACON_SOFT_SCROLLBACK_SIZE=64
CONFIG_DUMMY_CONSOLE=y
CONFIG_FRAMEBUFFER_CONSOLE=y
# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set
# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
# CONFIG_FONTS is not set
CONFIG_FONT_8x8=y
CONFIG_FONT_8x16=y
CONFIG_LOGO=y
# CONFIG_LOGO_LINUX_MONO is not set
# CONFIG_LOGO_LINUX_VGA16 is not set
CONFIG_LOGO_LINUX_CLUT224=y
CONFIG_SOUND=y
CONFIG_SOUND_OSS_CORE=y
CONFIG_SOUND_OSS_CORE_PRECLAIM=y
CONFIG_SND=y
CONFIG_SND_TIMER=y
CONFIG_SND_PCM=y
CONFIG_SND_RAWMIDI=m
CONFIG_SND_SEQUENCER=y
CONFIG_SND_SEQ_DUMMY=y
CONFIG_SND_OSSEMUL=y
CONFIG_SND_MIXER_OSS=y
CONFIG_SND_PCM_OSS=y
CONFIG_SND_PCM_OSS_PLUGINS=y
CONFIG_SND_SEQUENCER_OSS=y
# CONFIG_SND_HRTIMER is not set
CONFIG_SND_DYNAMIC_MINORS=y
# CONFIG_SND_SUPPORT_OLD_API is not set
# CONFIG_SND_VERBOSE_PROCFS is not set
# CONFIG_SND_VERBOSE_PRINTK is not set
# CONFIG_SND_DEBUG is not set
CONFIG_SND_VMASTER=y
CONFIG_SND_DMA_SGBUF=y
CONFIG_SND_RAWMIDI_SEQ=m
# CONFIG_SND_OPL3_LIB_SEQ is not set
# CONFIG_SND_OPL4_LIB_SEQ is not set
# CONFIG_SND_SBAWE_SEQ is not set
# CONFIG_SND_EMU10K1_SEQ is not set
CONFIG_SND_AC97_CODEC=m
CONFIG_SND_DRIVERS=y
# CONFIG_SND_PCSP is not set
# CONFIG_SND_DUMMY is not set
# CONFIG_SND_ALOOP is not set
# CONFIG_SND_VIRMIDI is not set
# CONFIG_SND_MTPAV is not set
# CONFIG_SND_SERIAL_U16550 is not set
# CONFIG_SND_MPU401 is not set
# CONFIG_SND_AC97_POWER_SAVE is not set
CONFIG_SND_PCI=y
# CONFIG_SND_AD1889 is not set
# CONFIG_SND_ALS300 is not set
# CONFIG_SND_ALS4000 is not set
# CONFIG_SND_ALI5451 is not set
# CONFIG_SND_ASIHPI is not set
# CONFIG_SND_ATIIXP is not set
# CONFIG_SND_ATIIXP_MODEM is not set
# CONFIG_SND_AU8810 is not set
# CONFIG_SND_AU8820 is not set
# CONFIG_SND_AU8830 is not set
# CONFIG_SND_AW2 is not set
# CONFIG_SND_AZT3328 is not set
# CONFIG_SND_BT87X is not set
CONFIG_SND_CA0106=m
# CONFIG_SND_CMIPCI is not set
# CONFIG_SND_OXYGEN is not set
# CONFIG_SND_CS4281 is not set
# CONFIG_SND_CS46XX is not set
# CONFIG_SND_CS5530 is not set
# CONFIG_SND_CS5535AUDIO is not set
# CONFIG_SND_CTXFI is not set
# CONFIG_SND_DARLA20 is not set
# CONFIG_SND_GINA20 is not set
# CONFIG_SND_LAYLA20 is not set
# CONFIG_SND_DARLA24 is not set
# CONFIG_SND_GINA24 is not set
# CONFIG_SND_LAYLA24 is not set
# CONFIG_SND_MONA is not set
# CONFIG_SND_MIA is not set
# CONFIG_SND_ECHO3G is not set
# CONFIG_SND_INDIGO is not set
# CONFIG_SND_INDIGOIO is not set
# CONFIG_SND_INDIGODJ is not set
# CONFIG_SND_INDIGOIOX is not set
# CONFIG_SND_INDIGODJX is not set
# CONFIG_SND_EMU10K1 is not set
# CONFIG_SND_EMU10K1X is not set
# CONFIG_SND_ENS1370 is not set
# CONFIG_SND_ENS1371 is not set
# CONFIG_SND_ES1938 is not set
# CONFIG_SND_ES1968 is not set
# CONFIG_SND_FM801 is not set
CONFIG_SND_HDA_INTEL=m
# CONFIG_SND_HDA_HWDEP is not set
# CONFIG_SND_HDA_INPUT_BEEP is not set
# CONFIG_SND_HDA_INPUT_JACK is not set
# CONFIG_SND_HDA_PATCH_LOADER is not set
CONFIG_SND_HDA_CODEC_REALTEK=y
CONFIG_SND_HDA_CODEC_ANALOG=y
CONFIG_SND_HDA_CODEC_SIGMATEL=y
CONFIG_SND_HDA_CODEC_VIA=y
CONFIG_SND_HDA_CODEC_HDMI=y
CONFIG_SND_HDA_CODEC_CIRRUS=y
CONFIG_SND_HDA_CODEC_CONEXANT=y
CONFIG_SND_HDA_CODEC_CA0110=y
CONFIG_SND_HDA_CODEC_CMEDIA=y
CONFIG_SND_HDA_CODEC_SI3054=y
CONFIG_SND_HDA_GENERIC=y
# CONFIG_SND_HDA_POWER_SAVE is not set
# CONFIG_SND_HDSP is not set
# CONFIG_SND_HDSPM is not set
# CONFIG_SND_ICE1712 is not set
# CONFIG_SND_ICE1724 is not set
# CONFIG_SND_INTEL8X0 is not set
# CONFIG_SND_INTEL8X0M is not set
# CONFIG_SND_KORG1212 is not set
# CONFIG_SND_LOLA is not set
# CONFIG_SND_LX6464ES is not set
# CONFIG_SND_MAESTRO3 is not set
# CONFIG_SND_MIXART is not set
# CONFIG_SND_NM256 is not set
# CONFIG_SND_PCXHR is not set
# CONFIG_SND_RIPTIDE is not set
# CONFIG_SND_RME32 is not set
# CONFIG_SND_RME96 is not set
# CONFIG_SND_RME9652 is not set
# CONFIG_SND_SONICVIBES is not set
# CONFIG_SND_TRIDENT is not set
# CONFIG_SND_VIA82XX is not set
# CONFIG_SND_VIA82XX_MODEM is not set
# CONFIG_SND_VIRTUOSO is not set
# CONFIG_SND_VX222 is not set
# CONFIG_SND_YMFPCI is not set
# CONFIG_SND_USB is not set
# CONFIG_SND_SOC is not set
# CONFIG_SOUND_PRIME is not set
CONFIG_AC97_BUS=m
CONFIG_HID_SUPPORT=y
CONFIG_HID=y
# CONFIG_HIDRAW is not set
#
# USB Input Devices
#
CONFIG_USB_HID=m
# CONFIG_HID_PID is not set
# CONFIG_USB_HIDDEV is not set
#
# Special HID drivers
#
CONFIG_HID_A4TECH=m
# CONFIG_HID_ACRUX is not set
CONFIG_HID_APPLE=m
CONFIG_HID_BELKIN=m
CONFIG_HID_CHERRY=m
CONFIG_HID_CHICONY=m
# CONFIG_HID_PRODIKEYS is not set
CONFIG_HID_CYPRESS=m
CONFIG_HID_DRAGONRISE=m
# CONFIG_DRAGONRISE_FF is not set
# CONFIG_HID_EMS_FF is not set
CONFIG_HID_EZKEY=m
# CONFIG_HID_KEYTOUCH is not set
CONFIG_HID_KYE=m
# CONFIG_HID_UCLOGIC is not set
# CONFIG_HID_WALTOP is not set
CONFIG_HID_GYRATION=m
CONFIG_HID_TWINHAN=m
CONFIG_HID_KENSINGTON=m
# CONFIG_HID_LCPOWER is not set
CONFIG_HID_LOGITECH=m
# CONFIG_LOGITECH_FF is not set
# CONFIG_LOGIRUMBLEPAD2_FF is not set
# CONFIG_LOGIG940_FF is not set
# CONFIG_LOGIWII_FF is not set
CONFIG_HID_MICROSOFT=m
CONFIG_HID_MONTEREY=m
# CONFIG_HID_MULTITOUCH is not set
CONFIG_HID_NTRIG=m
CONFIG_HID_ORTEK=m
CONFIG_HID_PANTHERLORD=m
# CONFIG_PANTHERLORD_FF is not set
CONFIG_HID_PETALYNX=m
# CONFIG_HID_PICOLCD is not set
# CONFIG_HID_QUANTA is not set
# CONFIG_HID_ROCCAT is not set
# CONFIG_HID_ROCCAT_ARVO is not set
# CONFIG_HID_ROCCAT_KONE is not set
# CONFIG_HID_ROCCAT_KONEPLUS is not set
# CONFIG_HID_ROCCAT_KOVAPLUS is not set
# CONFIG_HID_ROCCAT_PYRA is not set
CONFIG_HID_SAMSUNG=m
CONFIG_HID_SONY=m
CONFIG_HID_SUNPLUS=m
CONFIG_HID_GREENASIA=m
# CONFIG_GREENASIA_FF is not set
CONFIG_HID_SMARTJOYPLUS=m
# CONFIG_SMARTJOYPLUS_FF is not set
CONFIG_HID_TOPSEED=m
CONFIG_HID_THRUSTMASTER=m
# CONFIG_THRUSTMASTER_FF is not set
CONFIG_HID_ZEROPLUS=m
# CONFIG_ZEROPLUS_FF is not set
# CONFIG_HID_ZYDACRON is not set
CONFIG_USB_SUPPORT=y
CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_USB_ARCH_HAS_OHCI=y
CONFIG_USB_ARCH_HAS_EHCI=y
CONFIG_USB=m
# CONFIG_USB_DEBUG is not set
# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set
#
# Miscellaneous USB options
#
# CONFIG_USB_DEVICEFS is not set
# CONFIG_USB_DEVICE_CLASS is not set
# CONFIG_USB_DYNAMIC_MINORS is not set
# CONFIG_USB_MON is not set
# CONFIG_USB_WUSB is not set
# CONFIG_USB_WUSB_CBAF is not set
#
# USB Host Controller Drivers
#
# CONFIG_USB_C67X00_HCD is not set
# CONFIG_USB_XHCI_HCD is not set
CONFIG_USB_EHCI_HCD=m
# CONFIG_USB_EHCI_ROOT_HUB_TT is not set
# CONFIG_USB_EHCI_TT_NEWSCHED is not set
# CONFIG_USB_OXU210HP_HCD is not set
# CONFIG_USB_ISP116X_HCD is not set
# CONFIG_USB_ISP1760_HCD is not set
# CONFIG_USB_ISP1362_HCD is not set
# CONFIG_USB_OHCI_HCD is not set
CONFIG_USB_UHCI_HCD=m
# CONFIG_USB_SL811_HCD is not set
# CONFIG_USB_R8A66597_HCD is not set
# CONFIG_USB_WHCI_HCD is not set
# CONFIG_USB_HWA_HCD is not set
#
# Enable Host or Gadget support to see Inventra options
#
#
# USB Device Class drivers
#
# CONFIG_USB_ACM is not set
CONFIG_USB_PRINTER=m
# CONFIG_USB_WDM is not set
# CONFIG_USB_TMC is not set
#
# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
#
#
# also be needed; see USB_STORAGE Help for more info
#
CONFIG_USB_STORAGE=m
# CONFIG_USB_STORAGE_DEBUG is not set
# CONFIG_USB_STORAGE_REALTEK is not set
# CONFIG_USB_STORAGE_DATAFAB is not set
# CONFIG_USB_STORAGE_FREECOM is not set
# CONFIG_USB_STORAGE_ISD200 is not set
# CONFIG_USB_STORAGE_USBAT is not set
# CONFIG_USB_STORAGE_SDDR09 is not set
# CONFIG_USB_STORAGE_SDDR55 is not set
# CONFIG_USB_STORAGE_JUMPSHOT is not set
# CONFIG_USB_STORAGE_ALAUDA is not set
# CONFIG_USB_STORAGE_ONETOUCH is not set
# CONFIG_USB_STORAGE_KARMA is not set
# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
# CONFIG_USB_STORAGE_ENE_UB6250 is not set
# CONFIG_USB_UAS is not set
# CONFIG_USB_LIBUSUAL is not set
#
# USB Imaging devices
#
# CONFIG_USB_MDC800 is not set
# CONFIG_USB_MICROTEK is not set
#
# USB port drivers
#
# CONFIG_USB_SERIAL is not set
#
# USB Miscellaneous drivers
#
# CONFIG_USB_EMI62 is not set
# CONFIG_USB_EMI26 is not set
# CONFIG_USB_ADUTUX is not set
# CONFIG_USB_SEVSEG is not set
# CONFIG_USB_RIO500 is not set
# CONFIG_USB_LEGOTOWER is not set
# CONFIG_USB_LCD is not set
# CONFIG_USB_LED is not set
# CONFIG_USB_CYPRESS_CY7C63 is not set
# CONFIG_USB_CYTHERM is not set
# CONFIG_USB_IDMOUSE is not set
# CONFIG_USB_FTDI_ELAN is not set
# CONFIG_USB_APPLEDISPLAY is not set
# CONFIG_USB_SISUSBVGA is not set
# CONFIG_USB_LD is not set
# CONFIG_USB_TRANCEVIBRATOR is not set
# CONFIG_USB_IOWARRIOR is not set
# CONFIG_USB_TEST is not set
# CONFIG_USB_ISIGHTFW is not set
# CONFIG_USB_YUREX is not set
# CONFIG_USB_GADGET is not set
#
# OTG and related infrastructure
#
# CONFIG_NOP_USB_XCEIV is not set
# CONFIG_UWB is not set
# CONFIG_MMC is not set
# CONFIG_MEMSTICK is not set
# CONFIG_NEW_LEDS is not set
# CONFIG_NFC_DEVICES is not set
# CONFIG_ACCESSIBILITY is not set
# CONFIG_INFINIBAND is not set
# CONFIG_EDAC is not set
CONFIG_RTC_LIB=y
CONFIG_RTC_CLASS=y
CONFIG_RTC_HCTOSYS=y
CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
# CONFIG_RTC_DEBUG is not set
#
# RTC interfaces
#
CONFIG_RTC_INTF_SYSFS=y
CONFIG_RTC_INTF_PROC=y
CONFIG_RTC_INTF_DEV=y
# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
# CONFIG_RTC_DRV_TEST is not set
#
# SPI RTC drivers
#
#
# Platform RTC drivers
#
CONFIG_RTC_DRV_CMOS=y
# CONFIG_RTC_DRV_DS1286 is not set
# CONFIG_RTC_DRV_DS1511 is not set
# CONFIG_RTC_DRV_DS1553 is not set
# CONFIG_RTC_DRV_DS1742 is not set
# CONFIG_RTC_DRV_STK17TA8 is not set
# CONFIG_RTC_DRV_M48T86 is not set
# CONFIG_RTC_DRV_M48T35 is not set
# CONFIG_RTC_DRV_M48T59 is not set
# CONFIG_RTC_DRV_MSM6242 is not set
# CONFIG_RTC_DRV_BQ4802 is not set
# CONFIG_RTC_DRV_RP5C01 is not set
# CONFIG_RTC_DRV_V3020 is not set
#
# on-CPU RTC drivers
#
# CONFIG_DMADEVICES is not set
# CONFIG_AUXDISPLAY is not set
# CONFIG_UIO is not set
# CONFIG_STAGING is not set
# CONFIG_X86_PLATFORM_DEVICES is not set
#
# Firmware Drivers
#
# CONFIG_EDD is not set
CONFIG_FIRMWARE_MEMMAP=y
# CONFIG_DELL_RBU is not set
# CONFIG_DCDBAS is not set
# CONFIG_DMIID is not set
# CONFIG_DMI_SYSFS is not set
# CONFIG_ISCSI_IBFT_FIND is not set
# CONFIG_GOOGLE_FIRMWARE is not set
#
# File systems
#
CONFIG_EXT2_FS=y
# CONFIG_EXT2_FS_XATTR is not set
# CONFIG_EXT2_FS_XIP is not set
CONFIG_EXT3_FS=y
# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
# CONFIG_EXT3_FS_XATTR is not set
CONFIG_EXT4_FS=m
CONFIG_EXT4_FS_XATTR=y
# CONFIG_EXT4_FS_POSIX_ACL is not set
# CONFIG_EXT4_FS_SECURITY is not set
# CONFIG_EXT4_DEBUG is not set
CONFIG_JBD=y
CONFIG_JBD2=m
CONFIG_FS_MBCACHE=m
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
CONFIG_XFS_FS=y
# CONFIG_XFS_QUOTA is not set
# CONFIG_XFS_POSIX_ACL is not set
# CONFIG_XFS_RT is not set
# CONFIG_XFS_DEBUG is not set
# CONFIG_GFS2_FS is not set
CONFIG_BTRFS_FS=m
# CONFIG_BTRFS_FS_POSIX_ACL is not set
# CONFIG_NILFS2_FS is not set
# CONFIG_FS_POSIX_ACL is not set
CONFIG_EXPORTFS=y
CONFIG_FILE_LOCKING=y
CONFIG_FSNOTIFY=y
CONFIG_DNOTIFY=y
CONFIG_INOTIFY_USER=y
# CONFIG_FANOTIFY is not set
# CONFIG_QUOTA is not set
# CONFIG_QUOTACTL is not set
# CONFIG_AUTOFS4_FS is not set
CONFIG_FUSE_FS=m
# CONFIG_CUSE is not set
#
# Caches
#
# CONFIG_FSCACHE is not set
#
# CD-ROM/DVD Filesystems
#
CONFIG_ISO9660_FS=m
CONFIG_JOLIET=y
CONFIG_ZISOFS=y
CONFIG_UDF_FS=m
CONFIG_UDF_NLS=y
#
# DOS/FAT/NT Filesystems
#
CONFIG_FAT_FS=y
CONFIG_MSDOS_FS=m
CONFIG_VFAT_FS=y
CONFIG_FAT_DEFAULT_CODEPAGE=437
CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
CONFIG_NTFS_FS=m
# CONFIG_NTFS_DEBUG is not set
# CONFIG_NTFS_RW is not set
#
# Pseudo filesystems
#
CONFIG_PROC_FS=y
# CONFIG_PROC_KCORE is not set
CONFIG_PROC_SYSCTL=y
CONFIG_PROC_PAGE_MONITOR=y
CONFIG_SYSFS=y
CONFIG_TMPFS=y
# CONFIG_TMPFS_POSIX_ACL is not set
# CONFIG_TMPFS_XATTR is not set
# CONFIG_HUGETLBFS is not set
# CONFIG_HUGETLB_PAGE is not set
# CONFIG_CONFIGFS_FS is not set
# CONFIG_MISC_FILESYSTEMS is not set
# CONFIG_NETWORK_FILESYSTEMS is not set
#
# Partition Types
#
CONFIG_PARTITION_ADVANCED=y
# CONFIG_ACORN_PARTITION is not set
# CONFIG_OSF_PARTITION is not set
# CONFIG_AMIGA_PARTITION is not set
# CONFIG_ATARI_PARTITION is not set
# CONFIG_MAC_PARTITION is not set
CONFIG_MSDOS_PARTITION=y
CONFIG_BSD_DISKLABEL=y
# CONFIG_MINIX_SUBPARTITION is not set
# CONFIG_SOLARIS_X86_PARTITION is not set
# CONFIG_UNIXWARE_DISKLABEL is not set
CONFIG_LDM_PARTITION=y
# CONFIG_LDM_DEBUG is not set
# CONFIG_SGI_PARTITION is not set
# CONFIG_ULTRIX_PARTITION is not set
# CONFIG_SUN_PARTITION is not set
# CONFIG_KARMA_PARTITION is not set
# CONFIG_EFI_PARTITION is not set
# CONFIG_SYSV68_PARTITION is not set
CONFIG_NLS=y
CONFIG_NLS_DEFAULT="iso8859-1"
CONFIG_NLS_CODEPAGE_437=m
# CONFIG_NLS_CODEPAGE_737 is not set
# CONFIG_NLS_CODEPAGE_775 is not set
CONFIG_NLS_CODEPAGE_850=m
# CONFIG_NLS_CODEPAGE_852 is not set
# CONFIG_NLS_CODEPAGE_855 is not set
# CONFIG_NLS_CODEPAGE_857 is not set
# CONFIG_NLS_CODEPAGE_860 is not set
# CONFIG_NLS_CODEPAGE_861 is not set
# CONFIG_NLS_CODEPAGE_862 is not set
# CONFIG_NLS_CODEPAGE_863 is not set
# CONFIG_NLS_CODEPAGE_864 is not set
# CONFIG_NLS_CODEPAGE_865 is not set
# CONFIG_NLS_CODEPAGE_866 is not set
# CONFIG_NLS_CODEPAGE_869 is not set
# CONFIG_NLS_CODEPAGE_936 is not set
# CONFIG_NLS_CODEPAGE_950 is not set
# CONFIG_NLS_CODEPAGE_932 is not set
# CONFIG_NLS_CODEPAGE_949 is not set
# CONFIG_NLS_CODEPAGE_874 is not set
# CONFIG_NLS_ISO8859_8 is not set
# CONFIG_NLS_CODEPAGE_1250 is not set
# CONFIG_NLS_CODEPAGE_1251 is not set
CONFIG_NLS_ASCII=m
CONFIG_NLS_ISO8859_1=m
# CONFIG_NLS_ISO8859_2 is not set
# CONFIG_NLS_ISO8859_3 is not set
# CONFIG_NLS_ISO8859_4 is not set
# CONFIG_NLS_ISO8859_5 is not set
# CONFIG_NLS_ISO8859_6 is not set
# CONFIG_NLS_ISO8859_7 is not set
# CONFIG_NLS_ISO8859_9 is not set
# CONFIG_NLS_ISO8859_13 is not set
# CONFIG_NLS_ISO8859_14 is not set
CONFIG_NLS_ISO8859_15=m
# CONFIG_NLS_KOI8_R is not set
# CONFIG_NLS_KOI8_U is not set
CONFIG_NLS_UTF8=m
#
# Kernel hacking
#
CONFIG_TRACE_IRQFLAGS_SUPPORT=y
# CONFIG_PRINTK_TIME is not set
CONFIG_DEFAULT_MESSAGE_LOGLEVEL=4
CONFIG_ENABLE_WARN_DEPRECATED=y
# CONFIG_ENABLE_MUST_CHECK is not set
CONFIG_FRAME_WARN=1024
CONFIG_MAGIC_SYSRQ=y
# CONFIG_STRIP_ASM_SYMS is not set
# CONFIG_UNUSED_SYMBOLS is not set
# CONFIG_DEBUG_FS is not set
# CONFIG_HEADERS_CHECK is not set
# CONFIG_DEBUG_SECTION_MISMATCH is not set
CONFIG_DEBUG_KERNEL=y
# CONFIG_DEBUG_SHIRQ is not set
# CONFIG_LOCKUP_DETECTOR is not set
# CONFIG_HARDLOCKUP_DETECTOR is not set
CONFIG_DETECT_HUNG_TASK=y
CONFIG_DEFAULT_HUNG_TASK_TIMEOUT=120
# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
# CONFIG_SCHED_DEBUG is not set
# CONFIG_SCHEDSTATS is not set
# CONFIG_TIMER_STATS is not set
# CONFIG_DEBUG_OBJECTS is not set
# CONFIG_SLUB_DEBUG_ON is not set
# CONFIG_SLUB_STATS is not set
# CONFIG_DEBUG_KMEMLEAK is not set
# CONFIG_DEBUG_RT_MUTEXES is not set
# CONFIG_RT_MUTEX_TESTER is not set
# CONFIG_DEBUG_SPINLOCK is not set
# CONFIG_DEBUG_MUTEXES is not set
# CONFIG_DEBUG_LOCK_ALLOC is not set
# CONFIG_PROVE_LOCKING is not set
# CONFIG_SPARSE_RCU_POINTER is not set
# CONFIG_LOCK_STAT is not set
# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
# CONFIG_DEBUG_STACK_USAGE is not set
# CONFIG_DEBUG_KOBJECT is not set
CONFIG_DEBUG_BUGVERBOSE=y
# CONFIG_DEBUG_INFO is not set
# CONFIG_DEBUG_VM is not set
# CONFIG_DEBUG_VIRTUAL is not set
# CONFIG_DEBUG_WRITECOUNT is not set
CONFIG_DEBUG_MEMORY_INIT=y
# CONFIG_DEBUG_LIST is not set
# CONFIG_TEST_LIST_SORT is not set
# CONFIG_DEBUG_SG is not set
# CONFIG_DEBUG_NOTIFIERS is not set
# CONFIG_DEBUG_CREDENTIALS is not set
CONFIG_ARCH_WANT_FRAME_POINTERS=y
# CONFIG_FRAME_POINTER is not set
# CONFIG_BOOT_PRINTK_DELAY is not set
# CONFIG_RCU_TORTURE_TEST is not set
CONFIG_RCU_CPU_STALL_TIMEOUT=60
# CONFIG_BACKTRACE_SELF_TEST is not set
# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
# CONFIG_DEBUG_PER_CPU_MAPS is not set
# CONFIG_CPU_NOTIFIER_ERROR_INJECT is not set
# CONFIG_FAULT_INJECTION is not set
# CONFIG_LATENCYTOP is not set
CONFIG_SYSCTL_SYSCALL_CHECK=y
# CONFIG_DEBUG_PAGEALLOC is not set
CONFIG_USER_STACKTRACE_SUPPORT=y
CONFIG_HAVE_FUNCTION_TRACER=y
CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
CONFIG_HAVE_FUNCTION_GRAPH_FP_TEST=y
CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y
CONFIG_HAVE_DYNAMIC_FTRACE=y
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
CONFIG_HAVE_SYSCALL_TRACEPOINTS=y
CONFIG_HAVE_C_RECORDMCOUNT=y
CONFIG_TRACING_SUPPORT=y
# CONFIG_FTRACE is not set
# CONFIG_PROVIDE_OHCI1394_DMA_INIT is not set
# CONFIG_DMA_API_DEBUG is not set
# CONFIG_ATOMIC64_SELFTEST is not set
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
# CONFIG_KGDB is not set
CONFIG_HAVE_ARCH_KMEMCHECK=y
# CONFIG_TEST_KSTRTOX is not set
# CONFIG_STRICT_DEVMEM is not set
CONFIG_X86_VERBOSE_BOOTUP=y
CONFIG_EARLY_PRINTK=y
# CONFIG_EARLY_PRINTK_DBGP is not set
# CONFIG_DEBUG_STACKOVERFLOW is not set
# CONFIG_X86_PTDUMP is not set
# CONFIG_DEBUG_RODATA is not set
# CONFIG_DEBUG_SET_MODULE_RONX is not set
# CONFIG_DEBUG_NX_TEST is not set
# CONFIG_IOMMU_DEBUG is not set
# CONFIG_IOMMU_STRESS is not set
CONFIG_HAVE_MMIOTRACE_SUPPORT=y
CONFIG_IO_DELAY_TYPE_0X80=0
CONFIG_IO_DELAY_TYPE_0XED=1
CONFIG_IO_DELAY_TYPE_UDELAY=2
CONFIG_IO_DELAY_TYPE_NONE=3
CONFIG_IO_DELAY_0X80=y
# CONFIG_IO_DELAY_0XED is not set
# CONFIG_IO_DELAY_UDELAY is not set
# CONFIG_IO_DELAY_NONE is not set
CONFIG_DEFAULT_IO_DELAY_TYPE=0
# CONFIG_CPA_DEBUG is not set
CONFIG_OPTIMIZE_INLINING=y
# CONFIG_DEBUG_STRICT_USER_COPY_CHECKS is not set
#
# Security options
#
# CONFIG_KEYS is not set
# CONFIG_SECURITY_DMESG_RESTRICT is not set
# CONFIG_SECURITY is not set
# CONFIG_SECURITYFS is not set
CONFIG_DEFAULT_SECURITY_DAC=y
CONFIG_DEFAULT_SECURITY=""
CONFIG_CRYPTO=y
#
# Crypto core or helper
#
CONFIG_CRYPTO_ALGAPI=m
CONFIG_CRYPTO_ALGAPI2=m
CONFIG_CRYPTO_AEAD2=m
CONFIG_CRYPTO_BLKCIPHER=m
CONFIG_CRYPTO_BLKCIPHER2=m
CONFIG_CRYPTO_HASH=m
CONFIG_CRYPTO_HASH2=m
CONFIG_CRYPTO_RNG=m
CONFIG_CRYPTO_RNG2=m
CONFIG_CRYPTO_PCOMP=m
CONFIG_CRYPTO_PCOMP2=m
CONFIG_CRYPTO_MANAGER=m
CONFIG_CRYPTO_MANAGER2=m
CONFIG_CRYPTO_MANAGER_DISABLE_TESTS=y
# CONFIG_CRYPTO_GF128MUL is not set
# CONFIG_CRYPTO_NULL is not set
# CONFIG_CRYPTO_PCRYPT is not set
CONFIG_CRYPTO_WORKQUEUE=m
# CONFIG_CRYPTO_CRYPTD is not set
# CONFIG_CRYPTO_AUTHENC is not set
# CONFIG_CRYPTO_TEST is not set
#
# Authenticated Encryption with Associated Data
#
# CONFIG_CRYPTO_CCM is not set
# CONFIG_CRYPTO_GCM is not set
# CONFIG_CRYPTO_SEQIV is not set
#
# Block modes
#
CONFIG_CRYPTO_CBC=m
# CONFIG_CRYPTO_CTR is not set
# CONFIG_CRYPTO_CTS is not set
# CONFIG_CRYPTO_ECB is not set
# CONFIG_CRYPTO_LRW is not set
# CONFIG_CRYPTO_PCBC is not set
# CONFIG_CRYPTO_XTS is not set
#
# Hash modes
#
# CONFIG_CRYPTO_HMAC is not set
# CONFIG_CRYPTO_XCBC is not set
# CONFIG_CRYPTO_VMAC is not set
#
# Digest
#
CONFIG_CRYPTO_CRC32C=m
# CONFIG_CRYPTO_CRC32C_INTEL is not set
# CONFIG_CRYPTO_GHASH is not set
# CONFIG_CRYPTO_MD4 is not set
# CONFIG_CRYPTO_MD5 is not set
# CONFIG_CRYPTO_MICHAEL_MIC is not set
# CONFIG_CRYPTO_RMD128 is not set
# CONFIG_CRYPTO_RMD160 is not set
# CONFIG_CRYPTO_RMD256 is not set
# CONFIG_CRYPTO_RMD320 is not set
# CONFIG_CRYPTO_SHA1 is not set
# CONFIG_CRYPTO_SHA256 is not set
# CONFIG_CRYPTO_SHA512 is not set
# CONFIG_CRYPTO_TGR192 is not set
# CONFIG_CRYPTO_WP512 is not set
# CONFIG_CRYPTO_GHASH_CLMUL_NI_INTEL is not set
#
# Ciphers
#
CONFIG_CRYPTO_AES=m
# CONFIG_CRYPTO_AES_X86_64 is not set
# CONFIG_CRYPTO_AES_NI_INTEL is not set
# CONFIG_CRYPTO_ANUBIS is not set
# CONFIG_CRYPTO_ARC4 is not set
# CONFIG_CRYPTO_BLOWFISH is not set
# CONFIG_CRYPTO_CAMELLIA is not set
# CONFIG_CRYPTO_CAST5 is not set
# CONFIG_CRYPTO_CAST6 is not set
# CONFIG_CRYPTO_DES is not set
# CONFIG_CRYPTO_FCRYPT is not set
# CONFIG_CRYPTO_KHAZAD is not set
# CONFIG_CRYPTO_SALSA20 is not set
# CONFIG_CRYPTO_SALSA20_X86_64 is not set
# CONFIG_CRYPTO_SEED is not set
# CONFIG_CRYPTO_SERPENT is not set
# CONFIG_CRYPTO_TEA is not set
# CONFIG_CRYPTO_TWOFISH is not set
# CONFIG_CRYPTO_TWOFISH_X86_64 is not set
#
# Compression
#
# CONFIG_CRYPTO_DEFLATE is not set
CONFIG_CRYPTO_ZLIB=m
# CONFIG_CRYPTO_LZO is not set
#
# Random Number Generation
#
CONFIG_CRYPTO_ANSI_CPRNG=m
# CONFIG_CRYPTO_USER_API_HASH is not set
# CONFIG_CRYPTO_USER_API_SKCIPHER is not set
# CONFIG_CRYPTO_HW is not set
CONFIG_HAVE_KVM=y
# CONFIG_VIRTUALIZATION is not set
# CONFIG_BINARY_PRINTF is not set
#
# Library routines
#
CONFIG_BITREVERSE=y
CONFIG_GENERIC_FIND_FIRST_BIT=y
CONFIG_CRC_CCITT=m
CONFIG_CRC16=m
CONFIG_CRC_T10DIF=y
CONFIG_CRC_ITU_T=m
CONFIG_CRC32=y
# CONFIG_CRC7 is not set
CONFIG_LIBCRC32C=m
CONFIG_ZLIB_INFLATE=m
CONFIG_ZLIB_DEFLATE=m
CONFIG_LZO_COMPRESS=m
CONFIG_LZO_DECOMPRESS=m
CONFIG_XZ_DEC=m
CONFIG_XZ_DEC_X86=y
CONFIG_XZ_DEC_POWERPC=y
CONFIG_XZ_DEC_IA64=y
CONFIG_XZ_DEC_ARM=y
CONFIG_XZ_DEC_ARMTHUMB=y
CONFIG_XZ_DEC_SPARC=y
CONFIG_XZ_DEC_BCJ=y
# CONFIG_XZ_DEC_TEST is not set
CONFIG_TEXTSEARCH=y
CONFIG_TEXTSEARCH_KMP=m
CONFIG_TEXTSEARCH_BM=m
CONFIG_TEXTSEARCH_FSM=m
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
CONFIG_CPU_RMAP=y
CONFIG_NLATTR=y
# CONFIG_AVERAGE is not set
^ permalink raw reply [flat|nested] 22+ messages in thread
* Re: Very high CPU load when idle with 3.0-rc1
2011-05-30 11:34 ` Peter Zijlstra
@ 2011-05-30 12:17 ` Ingo Molnar
2011-05-30 13:10 ` Mike Galbraith
` (2 subsequent siblings)
3 siblings, 0 replies; 22+ messages in thread
From: Ingo Molnar @ 2011-05-30 12:17 UTC (permalink / raw)
To: Peter Zijlstra; +Cc: Damien Wyart, Mike Galbraith, linux-kernel, paulmck
* Peter Zijlstra <peterz@infradead.org> wrote:
> The problem that patch tried to address is that the RCU threads
> could stay in UNINTERRUPTIBLE state for quite a while and
> triggering the hung task detector due to on-demand wake-ups.
and it's not just the hung task detector, but obviously also the load
average itself that would be skewed in this original bug case as
well.
Thanks,
Ingo
^ permalink raw reply [flat|nested] 22+ messages in thread
* Re: Very high CPU load when idle with 3.0-rc1
2011-05-30 5:59 Very high CPU load when idle with 3.0-rc1 Damien Wyart
2011-05-30 11:34 ` Peter Zijlstra
2011-05-30 11:50 ` Very high CPU load when idle with 3.0-rc1 Damien Wyart
@ 2011-05-30 12:22 ` Morten P.D. Stevens
2 siblings, 0 replies; 22+ messages in thread
From: Morten P.D. Stevens @ 2011-05-30 12:22 UTC (permalink / raw)
To: Damien Wyart; +Cc: 'linux-kernel@vger.kernel.org'
2011/5/30 Damien Wyart <damien.wyart@free.fr>:
> Hi,
>
> Testing 3.0-rc1 on a core i7 (4 cores + HT), I get a load average of 9.0
> when idle. No process is shown running or in "D state" in htop. The box
> is behaving normal, no impression of lag or slowness.
>
> Not sure what other info to include, I guess this should be quite easy
> to reproduce.
Same problem here.
# uname -r
3.0.0-rc1
# uptime
14:18:39 up 30 min, 2 users, load average: 10.00, 10.15, 9.68
Best regards,
Morten
^ permalink raw reply [flat|nested] 22+ messages in thread
* Re: Very high CPU load when idle with 3.0-rc1
2011-05-30 11:34 ` Peter Zijlstra
2011-05-30 12:17 ` Ingo Molnar
@ 2011-05-30 13:10 ` Mike Galbraith
2011-05-30 16:23 ` Paul E. McKenney
2011-05-31 12:30 ` [tip:core/urgent] rcu: Cure load woes tip-bot for Peter Zijlstra
3 siblings, 0 replies; 22+ messages in thread
From: Mike Galbraith @ 2011-05-30 13:10 UTC (permalink / raw)
To: Peter Zijlstra; +Cc: Damien Wyart, Ingo Molnar, linux-kernel, paulmck
On Mon, 2011-05-30 at 13:34 +0200, Peter Zijlstra wrote:
> On Mon, 2011-05-30 at 07:59 +0200, Damien Wyart wrote:
> > Hi,
> >
> > Testing 3.0-rc1 on a core i7 (4 cores + HT), I get a load average of 9.0
> > when idle. No process is shown running or in "D state" in htop. The box
> > is behaving normal, no impression of lag or slowness.
> >
> > Not sure what other info to include, I guess this should be quite easy
> > to reproduce.
>
>
> ---
> Subject: rcu: Cure load woes
>
> Commit cc3ce5176d83 (rcu: Start RCU kthreads in TASK_INTERRUPTIBLE
> state) fudges a sleeping task' state, resulting in the scheduler seeing
> a TASK_UNINTERRUPTIBLE task going to sleep, but a TASK_INTERRUPTIBLE
> task waking up. The result is unbalanced load calculation.
(darn, 'which' poked me in the eye, but 'how' didn't)
Yup, all better.
-Mike
^ permalink raw reply [flat|nested] 22+ messages in thread
* Re: Very high CPU load when idle with 3.0-rc1
2011-05-30 11:34 ` Peter Zijlstra
2011-05-30 12:17 ` Ingo Molnar
2011-05-30 13:10 ` Mike Galbraith
@ 2011-05-30 16:23 ` Paul E. McKenney
2011-05-30 16:41 ` Paul E. McKenney
` (2 more replies)
2011-05-31 12:30 ` [tip:core/urgent] rcu: Cure load woes tip-bot for Peter Zijlstra
3 siblings, 3 replies; 22+ messages in thread
From: Paul E. McKenney @ 2011-05-30 16:23 UTC (permalink / raw)
To: Peter Zijlstra; +Cc: Damien Wyart, Ingo Molnar, Mike Galbraith, linux-kernel
On Mon, May 30, 2011 at 01:34:51PM +0200, Peter Zijlstra wrote:
> On Mon, 2011-05-30 at 07:59 +0200, Damien Wyart wrote:
> > Hi,
> >
> > Testing 3.0-rc1 on a core i7 (4 cores + HT), I get a load average of 9.0
> > when idle. No process is shown running or in "D state" in htop. The box
> > is behaving normal, no impression of lag or slowness.
> >
> > Not sure what other info to include, I guess this should be quite easy
> > to reproduce.
>
>
> ---
> Subject: rcu: Cure load woes
>
> Commit cc3ce5176d83 (rcu: Start RCU kthreads in TASK_INTERRUPTIBLE
> state) fudges a sleeping task' state, resulting in the scheduler seeing
> a TASK_UNINTERRUPTIBLE task going to sleep, but a TASK_INTERRUPTIBLE
> task waking up. The result is unbalanced load calculation.
>
> The problem that patch tried to address is that the RCU threads could
> stay in UNINTERRUPTIBLE state for quite a while and triggering the hung
> task detector due to on-demand wake-ups.
>
> Cure the problem differently by always giving the tasks at least one
> wake-up once the CPU is fully up and running, this will kick them out of
> the initial UNINTERRUPTIBLE state and into the regular INTERRUPTIBLE
> wait state.
>
> The alternative would be teaching kthread_create() to start threads as
> INTERRUPTIBLE but that needs a tad more thought.
>
> Reported-by: Damien Wyart <damien.wyart@free.fr>
> Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Very cool! I do have a few questions below, but am queuing and testing
this in the meantime.
> ---
> kernel/rcutree.c | 54 ++++++++++++++++++++++++++++++++++++++++-------
> kernel/rcutree_plugin.h | 11 ++++++++-
> 2 files changed, 56 insertions(+), 9 deletions(-)
>
> diff --git a/kernel/rcutree.c b/kernel/rcutree.c
> index 77a7671..89419ff 100644
> --- a/kernel/rcutree.c
> +++ b/kernel/rcutree.c
> @@ -1648,7 +1648,6 @@ static int __cpuinit rcu_spawn_one_cpu_kthread(int cpu)
> if (IS_ERR(t))
> return PTR_ERR(t);
> kthread_bind(t, cpu);
> - set_task_state(t, TASK_INTERRUPTIBLE);
> per_cpu(rcu_cpu_kthread_cpu, cpu) = cpu;
> WARN_ON_ONCE(per_cpu(rcu_cpu_kthread_task, cpu) != NULL);
> per_cpu(rcu_cpu_kthread_task, cpu) = t;
> @@ -1756,7 +1755,6 @@ static int __cpuinit rcu_spawn_one_node_kthread(struct rcu_state *rsp,
> if (IS_ERR(t))
> return PTR_ERR(t);
> raw_spin_lock_irqsave(&rnp->lock, flags);
> - set_task_state(t, TASK_INTERRUPTIBLE);
> rnp->node_kthread_task = t;
> raw_spin_unlock_irqrestore(&rnp->lock, flags);
> sp.sched_priority = 99;
> @@ -1765,6 +1763,8 @@ static int __cpuinit rcu_spawn_one_node_kthread(struct rcu_state *rsp,
> return rcu_spawn_one_boost_kthread(rsp, rnp, rnp_index);
> }
>
> +static void rcu_wake_one_boost_kthread(struct rcu_node *rnp);
> +
> /*
> * Spawn all kthreads -- called as soon as the scheduler is running.
> */
> @@ -1772,18 +1772,30 @@ static int __init rcu_spawn_kthreads(void)
> {
> int cpu;
> struct rcu_node *rnp;
> + struct task_struct *t;
>
> rcu_kthreads_spawnable = 1;
> for_each_possible_cpu(cpu) {
> per_cpu(rcu_cpu_has_work, cpu) = 0;
> - if (cpu_online(cpu))
> + if (cpu_online(cpu)) {
> (void)rcu_spawn_one_cpu_kthread(cpu);
> + t = per_cpu(rcu_cpu_kthread_task, cpu);
> + if (t)
> + wake_up_process(t);
> + }
Would it be OK to simplify the code a bit by doing this initial wakeup
in rcu_spawn_one_cpu_kthread() itself? My thought would be to rearrange
rcu_spawn_one_cpu_kthread() as follows:
static int __cpuinit rcu_spawn_one_cpu_kthread(int cpu)
{
struct sched_param sp;
struct task_struct *t;
if (!rcu_kthreads_spawnable ||
per_cpu(rcu_cpu_kthread_task, cpu) != NULL)
return 0;
t = kthread_create(rcu_cpu_kthread, (void *)(long)cpu, "rcuc%d", cpu);
if (IS_ERR(t))
return PTR_ERR(t);
kthread_bind(t, cpu);
set_task_state(t, TASK_INTERRUPTIBLE);
per_cpu(rcu_cpu_kthread_cpu, cpu) = cpu;
WARN_ON_ONCE(per_cpu(rcu_cpu_kthread_task, cpu) != NULL);
sp.sched_priority = RCU_KTHREAD_PRIO;
sched_setscheduler_nocheck(t, SCHED_FIFO, &sp);
wake_up_process(t);
per_cpu(rcu_cpu_kthread_task, cpu) = t;
return 0;
}
> }
> rnp = rcu_get_root(rcu_state);
> (void)rcu_spawn_one_node_kthread(rcu_state, rnp);
> + if (rnp->node_kthread_task)
> + wake_up_process(rnp->node_kthread_task);
Ditto here -- can this wake_up_process() be pushed into
rcu_spawn_one_node_kthread()?
> if (NUM_RCU_NODES > 1) {
> - rcu_for_each_leaf_node(rcu_state, rnp)
> + rcu_for_each_leaf_node(rcu_state, rnp) {
> (void)rcu_spawn_one_node_kthread(rcu_state, rnp);
> + t = rnp->node_kthread_task;
> + if (t)
> + wake_up_process(t);
> + rcu_wake_one_boost_kthread(rnp);
> + }
Analogous question here for rcu_wake_one_boost_kthread being eliminated
in favor of doing the wake_up_process() in rcu_spawn_one_node_kthread().
> }
> return 0;
> }
> @@ -2188,14 +2200,14 @@ rcu_init_percpu_data(int cpu, struct rcu_state *rsp, int preemptible)
> raw_spin_unlock_irqrestore(&rsp->onofflock, flags);
> }
>
> -static void __cpuinit rcu_online_cpu(int cpu)
> +static void __cpuinit rcu_prepare_cpu(int cpu)
> {
> rcu_init_percpu_data(cpu, &rcu_sched_state, 0);
> rcu_init_percpu_data(cpu, &rcu_bh_state, 0);
> rcu_preempt_init_percpu_data(cpu);
> }
>
> -static void __cpuinit rcu_online_kthreads(int cpu)
> +static void __cpuinit rcu_prepare_kthreads(int cpu)
Indeed, this naming is much better than mine. ;-)
> {
> struct rcu_data *rdp = per_cpu_ptr(rcu_state->rda, cpu);
> struct rcu_node *rnp = rdp->mynode;
> @@ -2209,6 +2221,31 @@ static void __cpuinit rcu_online_kthreads(int cpu)
> }
>
> /*
> + * kthread_create() creates threads in TASK_UNINTERRUPTIBLE state,
> + * but the RCU threads are woken on demand, and if demand is low this
> + * could be a while triggering the hung task watchdog.
> + *
> + * In order to avoid this, poke all tasks once the CPU is fully
> + * up and running.
> + */
> +static void __cpuinit rcu_online_kthreads(int cpu)
> +{
> + struct rcu_data *rdp = per_cpu_ptr(rcu_state->rda, cpu);
> + struct rcu_node *rnp = rdp->mynode;
> + struct task_struct *t;
> +
> + t = per_cpu(rcu_cpu_kthread_task, cpu);
> + if (t)
> + wake_up_process(t);
> +
> + t = rnp->node_kthread_task;
> + if (t)
> + wake_up_process(t);
> +
> + rcu_wake_one_boost_kthread(rnp);
Interesting... So we are really awakening them twice, once at creation
time to get them to sleep interruptibly, and a second time when the CPU
comes online.
What does this second set of wake_up_process() calls do?
> +}
> +
> +/*
> * Handle CPU online/offline notification events.
> */
> static int __cpuinit rcu_cpu_notify(struct notifier_block *self,
> @@ -2221,10 +2258,11 @@ static int __cpuinit rcu_cpu_notify(struct notifier_block *self,
> switch (action) {
> case CPU_UP_PREPARE:
> case CPU_UP_PREPARE_FROZEN:
> - rcu_online_cpu(cpu);
> - rcu_online_kthreads(cpu);
> + rcu_prepare_cpu(cpu);
> + rcu_prepare_kthreads(cpu);
> break;
> case CPU_ONLINE:
> + rcu_online_kthreads(cpu);
> case CPU_DOWN_FAILED:
> rcu_node_kthread_setaffinity(rnp, -1);
> rcu_cpu_kthread_setrt(cpu, 1);
> diff --git a/kernel/rcutree_plugin.h b/kernel/rcutree_plugin.h
> index a767b7d..2910de7 100644
> --- a/kernel/rcutree_plugin.h
> +++ b/kernel/rcutree_plugin.h
> @@ -1295,7 +1295,6 @@ static int __cpuinit rcu_spawn_one_boost_kthread(struct rcu_state *rsp,
> if (IS_ERR(t))
> return PTR_ERR(t);
> raw_spin_lock_irqsave(&rnp->lock, flags);
> - set_task_state(t, TASK_INTERRUPTIBLE);
> rnp->boost_kthread_task = t;
> raw_spin_unlock_irqrestore(&rnp->lock, flags);
> sp.sched_priority = RCU_KTHREAD_PRIO;
> @@ -1303,6 +1302,12 @@ static int __cpuinit rcu_spawn_one_boost_kthread(struct rcu_state *rsp,
> return 0;
> }
>
> +static void __cpuinit rcu_wake_one_boost_kthread(struct rcu_node *rnp)
> +{
> + if (rnp->boost_kthread_task)
> + wake_up_process(rnp->boost_thread_task);
> +}
> +
> #else /* #ifdef CONFIG_RCU_BOOST */
>
> static void rcu_initiate_boost(struct rcu_node *rnp, unsigned long flags)
> @@ -1326,6 +1331,10 @@ static int __cpuinit rcu_spawn_one_boost_kthread(struct rcu_state *rsp,
> return 0;
> }
>
> +static void __cpuinit rcu_wake_one_boost_kthread(struct rcu_node *rnp)
> +{
> +}
> +
> #endif /* #else #ifdef CONFIG_RCU_BOOST */
>
> #ifndef CONFIG_SMP
>
^ permalink raw reply [flat|nested] 22+ messages in thread
* Re: Very high CPU load when idle with 3.0-rc1
2011-05-30 16:23 ` Paul E. McKenney
@ 2011-05-30 16:41 ` Paul E. McKenney
2011-05-30 16:47 ` Peter Zijlstra
2011-05-30 16:46 ` Peter Zijlstra
2011-05-30 17:19 ` Peter Zijlstra
2 siblings, 1 reply; 22+ messages in thread
From: Paul E. McKenney @ 2011-05-30 16:41 UTC (permalink / raw)
To: Peter Zijlstra; +Cc: Damien Wyart, Ingo Molnar, Mike Galbraith, linux-kernel
On Mon, May 30, 2011 at 09:23:54AM -0700, Paul E. McKenney wrote:
> On Mon, May 30, 2011 at 01:34:51PM +0200, Peter Zijlstra wrote:
> > On Mon, 2011-05-30 at 07:59 +0200, Damien Wyart wrote:
> > > Hi,
> > >
> > > Testing 3.0-rc1 on a core i7 (4 cores + HT), I get a load average of 9.0
> > > when idle. No process is shown running or in "D state" in htop. The box
> > > is behaving normal, no impression of lag or slowness.
> > >
> > > Not sure what other info to include, I guess this should be quite easy
> > > to reproduce.
> >
> >
> > ---
> > Subject: rcu: Cure load woes
> >
> > Commit cc3ce5176d83 (rcu: Start RCU kthreads in TASK_INTERRUPTIBLE
> > state) fudges a sleeping task' state, resulting in the scheduler seeing
> > a TASK_UNINTERRUPTIBLE task going to sleep, but a TASK_INTERRUPTIBLE
> > task waking up. The result is unbalanced load calculation.
> >
> > The problem that patch tried to address is that the RCU threads could
> > stay in UNINTERRUPTIBLE state for quite a while and triggering the hung
> > task detector due to on-demand wake-ups.
> >
> > Cure the problem differently by always giving the tasks at least one
> > wake-up once the CPU is fully up and running, this will kick them out of
> > the initial UNINTERRUPTIBLE state and into the regular INTERRUPTIBLE
> > wait state.
> >
> > The alternative would be teaching kthread_create() to start threads as
> > INTERRUPTIBLE but that needs a tad more thought.
> >
> > Reported-by: Damien Wyart <damien.wyart@free.fr>
> > Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
>
> Very cool! I do have a few questions below, but am queuing and testing
> this in the meantime.
>
> > ---
> > kernel/rcutree.c | 54 ++++++++++++++++++++++++++++++++++++++++-------
> > kernel/rcutree_plugin.h | 11 ++++++++-
> > 2 files changed, 56 insertions(+), 9 deletions(-)
> >
> > diff --git a/kernel/rcutree.c b/kernel/rcutree.c
> > index 77a7671..89419ff 100644
> > --- a/kernel/rcutree.c
> > +++ b/kernel/rcutree.c
> > @@ -1648,7 +1648,6 @@ static int __cpuinit rcu_spawn_one_cpu_kthread(int cpu)
> > if (IS_ERR(t))
> > return PTR_ERR(t);
> > kthread_bind(t, cpu);
> > - set_task_state(t, TASK_INTERRUPTIBLE);
> > per_cpu(rcu_cpu_kthread_cpu, cpu) = cpu;
> > WARN_ON_ONCE(per_cpu(rcu_cpu_kthread_task, cpu) != NULL);
> > per_cpu(rcu_cpu_kthread_task, cpu) = t;
> > @@ -1756,7 +1755,6 @@ static int __cpuinit rcu_spawn_one_node_kthread(struct rcu_state *rsp,
> > if (IS_ERR(t))
> > return PTR_ERR(t);
> > raw_spin_lock_irqsave(&rnp->lock, flags);
> > - set_task_state(t, TASK_INTERRUPTIBLE);
> > rnp->node_kthread_task = t;
> > raw_spin_unlock_irqrestore(&rnp->lock, flags);
> > sp.sched_priority = 99;
> > @@ -1765,6 +1763,8 @@ static int __cpuinit rcu_spawn_one_node_kthread(struct rcu_state *rsp,
> > return rcu_spawn_one_boost_kthread(rsp, rnp, rnp_index);
> > }
> >
> > +static void rcu_wake_one_boost_kthread(struct rcu_node *rnp);
> > +
> > /*
> > * Spawn all kthreads -- called as soon as the scheduler is running.
> > */
> > @@ -1772,18 +1772,30 @@ static int __init rcu_spawn_kthreads(void)
> > {
> > int cpu;
> > struct rcu_node *rnp;
> > + struct task_struct *t;
> >
> > rcu_kthreads_spawnable = 1;
> > for_each_possible_cpu(cpu) {
> > per_cpu(rcu_cpu_has_work, cpu) = 0;
> > - if (cpu_online(cpu))
> > + if (cpu_online(cpu)) {
> > (void)rcu_spawn_one_cpu_kthread(cpu);
> > + t = per_cpu(rcu_cpu_kthread_task, cpu);
> > + if (t)
> > + wake_up_process(t);
> > + }
>
> Would it be OK to simplify the code a bit by doing this initial wakeup
> in rcu_spawn_one_cpu_kthread() itself? My thought would be to rearrange
> rcu_spawn_one_cpu_kthread() as follows:
>
> static int __cpuinit rcu_spawn_one_cpu_kthread(int cpu)
> {
> struct sched_param sp;
> struct task_struct *t;
>
> if (!rcu_kthreads_spawnable ||
> per_cpu(rcu_cpu_kthread_task, cpu) != NULL)
> return 0;
> t = kthread_create(rcu_cpu_kthread, (void *)(long)cpu, "rcuc%d", cpu);
> if (IS_ERR(t))
> return PTR_ERR(t);
> kthread_bind(t, cpu);
> set_task_state(t, TASK_INTERRUPTIBLE);
> per_cpu(rcu_cpu_kthread_cpu, cpu) = cpu;
> WARN_ON_ONCE(per_cpu(rcu_cpu_kthread_task, cpu) != NULL);
> sp.sched_priority = RCU_KTHREAD_PRIO;
> sched_setscheduler_nocheck(t, SCHED_FIFO, &sp);
> wake_up_process(t);
> per_cpu(rcu_cpu_kthread_task, cpu) = t;
> return 0;
> }
>
> > }
> > rnp = rcu_get_root(rcu_state);
> > (void)rcu_spawn_one_node_kthread(rcu_state, rnp);
> > + if (rnp->node_kthread_task)
> > + wake_up_process(rnp->node_kthread_task);
>
> Ditto here -- can this wake_up_process() be pushed into
> rcu_spawn_one_node_kthread()?
>
> > if (NUM_RCU_NODES > 1) {
> > - rcu_for_each_leaf_node(rcu_state, rnp)
> > + rcu_for_each_leaf_node(rcu_state, rnp) {
> > (void)rcu_spawn_one_node_kthread(rcu_state, rnp);
> > + t = rnp->node_kthread_task;
> > + if (t)
> > + wake_up_process(t);
> > + rcu_wake_one_boost_kthread(rnp);
> > + }
>
> Analogous question here for rcu_wake_one_boost_kthread being eliminated
> in favor of doing the wake_up_process() in rcu_spawn_one_node_kthread().
>
> > }
> > return 0;
> > }
> > @@ -2188,14 +2200,14 @@ rcu_init_percpu_data(int cpu, struct rcu_state *rsp, int preemptible)
> > raw_spin_unlock_irqrestore(&rsp->onofflock, flags);
> > }
> >
> > -static void __cpuinit rcu_online_cpu(int cpu)
> > +static void __cpuinit rcu_prepare_cpu(int cpu)
> > {
> > rcu_init_percpu_data(cpu, &rcu_sched_state, 0);
> > rcu_init_percpu_data(cpu, &rcu_bh_state, 0);
> > rcu_preempt_init_percpu_data(cpu);
> > }
> >
> > -static void __cpuinit rcu_online_kthreads(int cpu)
> > +static void __cpuinit rcu_prepare_kthreads(int cpu)
>
> Indeed, this naming is much better than mine. ;-)
>
> > {
> > struct rcu_data *rdp = per_cpu_ptr(rcu_state->rda, cpu);
> > struct rcu_node *rnp = rdp->mynode;
> > @@ -2209,6 +2221,31 @@ static void __cpuinit rcu_online_kthreads(int cpu)
> > }
> >
> > /*
> > + * kthread_create() creates threads in TASK_UNINTERRUPTIBLE state,
> > + * but the RCU threads are woken on demand, and if demand is low this
> > + * could be a while triggering the hung task watchdog.
> > + *
> > + * In order to avoid this, poke all tasks once the CPU is fully
> > + * up and running.
> > + */
> > +static void __cpuinit rcu_online_kthreads(int cpu)
> > +{
> > + struct rcu_data *rdp = per_cpu_ptr(rcu_state->rda, cpu);
> > + struct rcu_node *rnp = rdp->mynode;
> > + struct task_struct *t;
> > +
> > + t = per_cpu(rcu_cpu_kthread_task, cpu);
> > + if (t)
> > + wake_up_process(t);
> > +
> > + t = rnp->node_kthread_task;
> > + if (t)
> > + wake_up_process(t);
> > +
> > + rcu_wake_one_boost_kthread(rnp);
>
> Interesting... So we are really awakening them twice, once at creation
> time to get them to sleep interruptibly, and a second time when the CPU
> comes online.
>
> What does this second set of wake_up_process() calls do?
>
> > +}
> > +
> > +/*
> > * Handle CPU online/offline notification events.
> > */
> > static int __cpuinit rcu_cpu_notify(struct notifier_block *self,
> > @@ -2221,10 +2258,11 @@ static int __cpuinit rcu_cpu_notify(struct notifier_block *self,
> > switch (action) {
> > case CPU_UP_PREPARE:
> > case CPU_UP_PREPARE_FROZEN:
> > - rcu_online_cpu(cpu);
> > - rcu_online_kthreads(cpu);
> > + rcu_prepare_cpu(cpu);
> > + rcu_prepare_kthreads(cpu);
> > break;
> > case CPU_ONLINE:
> > + rcu_online_kthreads(cpu);
> > case CPU_DOWN_FAILED:
> > rcu_node_kthread_setaffinity(rnp, -1);
> > rcu_cpu_kthread_setrt(cpu, 1);
> > diff --git a/kernel/rcutree_plugin.h b/kernel/rcutree_plugin.h
> > index a767b7d..2910de7 100644
> > --- a/kernel/rcutree_plugin.h
> > +++ b/kernel/rcutree_plugin.h
> > @@ -1295,7 +1295,6 @@ static int __cpuinit rcu_spawn_one_boost_kthread(struct rcu_state *rsp,
> > if (IS_ERR(t))
> > return PTR_ERR(t);
> > raw_spin_lock_irqsave(&rnp->lock, flags);
> > - set_task_state(t, TASK_INTERRUPTIBLE);
> > rnp->boost_kthread_task = t;
> > raw_spin_unlock_irqrestore(&rnp->lock, flags);
> > sp.sched_priority = RCU_KTHREAD_PRIO;
> > @@ -1303,6 +1302,12 @@ static int __cpuinit rcu_spawn_one_boost_kthread(struct rcu_state *rsp,
> > return 0;
> > }
> >
> > +static void __cpuinit rcu_wake_one_boost_kthread(struct rcu_node *rnp)
> > +{
> > + if (rnp->boost_kthread_task)
> > + wake_up_process(rnp->boost_thread_task);
And this needs to be:
wake_up_process(rnp->boost_kthread_task);
I fixed this in my tree, continuing testing.
Thanx, Paul
> > +}
> > +
> > #else /* #ifdef CONFIG_RCU_BOOST */
> >
> > static void rcu_initiate_boost(struct rcu_node *rnp, unsigned long flags)
> > @@ -1326,6 +1331,10 @@ static int __cpuinit rcu_spawn_one_boost_kthread(struct rcu_state *rsp,
> > return 0;
> > }
> >
> > +static void __cpuinit rcu_wake_one_boost_kthread(struct rcu_node *rnp)
> > +{
> > +}
> > +
> > #endif /* #else #ifdef CONFIG_RCU_BOOST */
> >
> > #ifndef CONFIG_SMP
> >
^ permalink raw reply [flat|nested] 22+ messages in thread
* Re: Very high CPU load when idle with 3.0-rc1
2011-05-30 16:23 ` Paul E. McKenney
2011-05-30 16:41 ` Paul E. McKenney
@ 2011-05-30 16:46 ` Peter Zijlstra
2011-05-30 21:29 ` Paul E. McKenney
2011-05-30 17:19 ` Peter Zijlstra
2 siblings, 1 reply; 22+ messages in thread
From: Peter Zijlstra @ 2011-05-30 16:46 UTC (permalink / raw)
To: paulmck; +Cc: Damien Wyart, Ingo Molnar, Mike Galbraith, linux-kernel
On Mon, 2011-05-30 at 09:23 -0700, Paul E. McKenney wrote:
> > @@ -1772,18 +1772,30 @@ static int __init rcu_spawn_kthreads(void)
> > {
> > int cpu;
> > struct rcu_node *rnp;
> > + struct task_struct *t;
> >
> > rcu_kthreads_spawnable = 1;
> > for_each_possible_cpu(cpu) {
> > per_cpu(rcu_cpu_has_work, cpu) = 0;
> > - if (cpu_online(cpu))
> > + if (cpu_online(cpu)) {
> > (void)rcu_spawn_one_cpu_kthread(cpu);
> > + t = per_cpu(rcu_cpu_kthread_task, cpu);
> > + if (t)
> > + wake_up_process(t);
> > + }
>
> Would it be OK to simplify the code a bit by doing this initial wakeup
> in rcu_spawn_one_cpu_kthread() itself? My thought would be to rearrange
> rcu_spawn_one_cpu_kthread() as follows:
>
well, no that would get us back to waking a task affine to an offline
cpu :-)
> > @@ -2209,6 +2221,31 @@ static void __cpuinit rcu_online_kthreads(int cpu)
> > }
> >
> > /*
> > + * kthread_create() creates threads in TASK_UNINTERRUPTIBLE state,
> > + * but the RCU threads are woken on demand, and if demand is low this
> > + * could be a while triggering the hung task watchdog.
> > + *
> > + * In order to avoid this, poke all tasks once the CPU is fully
> > + * up and running.
> > + */
> > +static void __cpuinit rcu_online_kthreads(int cpu)
> > +{
> > + struct rcu_data *rdp = per_cpu_ptr(rcu_state->rda, cpu);
> > + struct rcu_node *rnp = rdp->mynode;
> > + struct task_struct *t;
> > +
> > + t = per_cpu(rcu_cpu_kthread_task, cpu);
> > + if (t)
> > + wake_up_process(t);
> > +
> > + t = rnp->node_kthread_task;
> > + if (t)
> > + wake_up_process(t);
> > +
> > + rcu_wake_one_boost_kthread(rnp);
>
> Interesting... So we are really awakening them twice, once at creation
> time to get them to sleep interruptibly, and a second time when the CPU
> comes online.
>
> What does this second set of wake_up_process() calls do?
Ah, not so, see the initial one is conditional on cpu_online() and will
fail for the CPU_UP_PREPARE case, this new function will be ran from
CPU_ONLINE to then issue the first wakeup.
The distinction comes from the initialize while cpus are already running
vs hotplug.
^ permalink raw reply [flat|nested] 22+ messages in thread
* Re: Very high CPU load when idle with 3.0-rc1
2011-05-30 16:41 ` Paul E. McKenney
@ 2011-05-30 16:47 ` Peter Zijlstra
0 siblings, 0 replies; 22+ messages in thread
From: Peter Zijlstra @ 2011-05-30 16:47 UTC (permalink / raw)
To: paulmck; +Cc: Damien Wyart, Ingo Molnar, Mike Galbraith, linux-kernel
On Mon, 2011-05-30 at 09:41 -0700, Paul E. McKenney wrote:
> > > +static void __cpuinit rcu_wake_one_boost_kthread(struct rcu_node *rnp)
> > > +{
> > > + if (rnp->boost_kthread_task)
> > > + wake_up_process(rnp->boost_thread_task);
>
> And this needs to be:
>
> wake_up_process(rnp->boost_kthread_task);
>
> I fixed this in my tree, continuing testing.
d'oh yes.
^ permalink raw reply [flat|nested] 22+ messages in thread
* Re: Very high CPU load when idle with 3.0-rc1
2011-05-30 16:23 ` Paul E. McKenney
2011-05-30 16:41 ` Paul E. McKenney
2011-05-30 16:46 ` Peter Zijlstra
@ 2011-05-30 17:19 ` Peter Zijlstra
2011-05-30 21:28 ` Paul E. McKenney
2 siblings, 1 reply; 22+ messages in thread
From: Peter Zijlstra @ 2011-05-30 17:19 UTC (permalink / raw)
To: paulmck; +Cc: Damien Wyart, Ingo Molnar, Mike Galbraith, linux-kernel
On Mon, 2011-05-30 at 09:23 -0700, Paul E. McKenney wrote:
> sp.sched_priority = RCU_KTHREAD_PRIO;
> sched_setscheduler_nocheck(t, SCHED_FIFO, &sp);
Why are those things RT tasks anyway? The old ksoftirq runs as a regular
task. And once you start boosting things you can boost this into FIFO as
well...
just wondering..
^ permalink raw reply [flat|nested] 22+ messages in thread
* Re: Very high CPU load when idle with 3.0-rc1
2011-05-30 17:19 ` Peter Zijlstra
@ 2011-05-30 21:28 ` Paul E. McKenney
2011-05-30 21:33 ` Peter Zijlstra
0 siblings, 1 reply; 22+ messages in thread
From: Paul E. McKenney @ 2011-05-30 21:28 UTC (permalink / raw)
To: Peter Zijlstra; +Cc: Damien Wyart, Ingo Molnar, Mike Galbraith, linux-kernel
On Mon, May 30, 2011 at 07:19:49PM +0200, Peter Zijlstra wrote:
> On Mon, 2011-05-30 at 09:23 -0700, Paul E. McKenney wrote:
> > sp.sched_priority = RCU_KTHREAD_PRIO;
> > sched_setscheduler_nocheck(t, SCHED_FIFO, &sp);
>
> Why are those things RT tasks anyway? The old ksoftirq runs as a regular
> task. And once you start boosting things you can boost this into FIFO as
> well...
>
> just wondering..
Because priority boosting doesn't help unless the callbacks also run
RT priority.
I could make it so that they ran as normal tasks if !RCU_BOOST, but
they would still need to run as RT tasks for RCU_BOOST. I figured
running them the same way in both cases would be simpler.
Thanx, Paul
^ permalink raw reply [flat|nested] 22+ messages in thread
* Re: Very high CPU load when idle with 3.0-rc1
2011-05-30 16:46 ` Peter Zijlstra
@ 2011-05-30 21:29 ` Paul E. McKenney
2011-05-30 21:35 ` Peter Zijlstra
0 siblings, 1 reply; 22+ messages in thread
From: Paul E. McKenney @ 2011-05-30 21:29 UTC (permalink / raw)
To: Peter Zijlstra; +Cc: Damien Wyart, Ingo Molnar, Mike Galbraith, linux-kernel
On Mon, May 30, 2011 at 06:46:21PM +0200, Peter Zijlstra wrote:
> On Mon, 2011-05-30 at 09:23 -0700, Paul E. McKenney wrote:
>
> > > @@ -1772,18 +1772,30 @@ static int __init rcu_spawn_kthreads(void)
> > > {
> > > int cpu;
> > > struct rcu_node *rnp;
> > > + struct task_struct *t;
> > >
> > > rcu_kthreads_spawnable = 1;
> > > for_each_possible_cpu(cpu) {
> > > per_cpu(rcu_cpu_has_work, cpu) = 0;
> > > - if (cpu_online(cpu))
> > > + if (cpu_online(cpu)) {
> > > (void)rcu_spawn_one_cpu_kthread(cpu);
> > > + t = per_cpu(rcu_cpu_kthread_task, cpu);
> > > + if (t)
> > > + wake_up_process(t);
> > > + }
> >
> > Would it be OK to simplify the code a bit by doing this initial wakeup
> > in rcu_spawn_one_cpu_kthread() itself? My thought would be to rearrange
> > rcu_spawn_one_cpu_kthread() as follows:
>
> well, no that would get us back to waking a task affine to an offline
> cpu :-)
My turn to say d'oh, then!
But I should be able to move them back in under "if (cpu_online(cpu))",
right?
> > > @@ -2209,6 +2221,31 @@ static void __cpuinit rcu_online_kthreads(int cpu)
> > > }
> > >
> > > /*
> > > + * kthread_create() creates threads in TASK_UNINTERRUPTIBLE state,
> > > + * but the RCU threads are woken on demand, and if demand is low this
> > > + * could be a while triggering the hung task watchdog.
> > > + *
> > > + * In order to avoid this, poke all tasks once the CPU is fully
> > > + * up and running.
> > > + */
> > > +static void __cpuinit rcu_online_kthreads(int cpu)
> > > +{
> > > + struct rcu_data *rdp = per_cpu_ptr(rcu_state->rda, cpu);
> > > + struct rcu_node *rnp = rdp->mynode;
> > > + struct task_struct *t;
> > > +
> > > + t = per_cpu(rcu_cpu_kthread_task, cpu);
> > > + if (t)
> > > + wake_up_process(t);
> > > +
> > > + t = rnp->node_kthread_task;
> > > + if (t)
> > > + wake_up_process(t);
> > > +
> > > + rcu_wake_one_boost_kthread(rnp);
> >
> > Interesting... So we are really awakening them twice, once at creation
> > time to get them to sleep interruptibly, and a second time when the CPU
> > comes online.
> >
> > What does this second set of wake_up_process() calls do?
>
> Ah, not so, see the initial one is conditional on cpu_online() and will
> fail for the CPU_UP_PREPARE case, this new function will be ran from
> CPU_ONLINE to then issue the first wakeup.
>
> The distinction comes from the initialize while cpus are already running
> vs hotplug.
OK, got it.
Thanx, Paul
^ permalink raw reply [flat|nested] 22+ messages in thread
* Re: Very high CPU load when idle with 3.0-rc1
2011-05-30 21:28 ` Paul E. McKenney
@ 2011-05-30 21:33 ` Peter Zijlstra
2011-05-31 1:45 ` Paul E. McKenney
0 siblings, 1 reply; 22+ messages in thread
From: Peter Zijlstra @ 2011-05-30 21:33 UTC (permalink / raw)
To: paulmck; +Cc: Damien Wyart, Ingo Molnar, Mike Galbraith, linux-kernel
On Mon, 2011-05-30 at 14:28 -0700, Paul E. McKenney wrote:
> On Mon, May 30, 2011 at 07:19:49PM +0200, Peter Zijlstra wrote:
> > On Mon, 2011-05-30 at 09:23 -0700, Paul E. McKenney wrote:
> > > sp.sched_priority = RCU_KTHREAD_PRIO;
> > > sched_setscheduler_nocheck(t, SCHED_FIFO, &sp);
> >
> > Why are those things RT tasks anyway? The old ksoftirq runs as a regular
> > task. And once you start boosting things you can boost this into FIFO as
> > well...
> >
> > just wondering..
>
> Because priority boosting doesn't help unless the callbacks also run
> RT priority.
>
> I could make it so that they ran as normal tasks if !RCU_BOOST, but
> they would still need to run as RT tasks for RCU_BOOST. I figured
> running them the same way in both cases would be simpler.
Ah, I thought you'd boost the threads along with the waiters, to the
same prio so that they wouldn't disturb higher priority tasks for no
reason.
^ permalink raw reply [flat|nested] 22+ messages in thread
* Re: Very high CPU load when idle with 3.0-rc1
2011-05-30 21:29 ` Paul E. McKenney
@ 2011-05-30 21:35 ` Peter Zijlstra
2011-05-31 1:45 ` Paul E. McKenney
0 siblings, 1 reply; 22+ messages in thread
From: Peter Zijlstra @ 2011-05-30 21:35 UTC (permalink / raw)
To: paulmck; +Cc: Damien Wyart, Ingo Molnar, Mike Galbraith, linux-kernel
On Mon, 2011-05-30 at 14:29 -0700, Paul E. McKenney wrote:
> But I should be able to move them back in under "if (cpu_online(cpu))",
> right?
Yeah, you should be able to put the wakeup in the spawn function when
made conditional on cpu_online(), although I'm not quite sure how to do
that for the rnp case, but I guess you'll have a better grasp on that.
^ permalink raw reply [flat|nested] 22+ messages in thread
* Re: Very high CPU load when idle with 3.0-rc1
2011-05-30 21:33 ` Peter Zijlstra
@ 2011-05-31 1:45 ` Paul E. McKenney
2011-06-01 11:05 ` Peter Zijlstra
0 siblings, 1 reply; 22+ messages in thread
From: Paul E. McKenney @ 2011-05-31 1:45 UTC (permalink / raw)
To: Peter Zijlstra; +Cc: Damien Wyart, Ingo Molnar, Mike Galbraith, linux-kernel
On Mon, May 30, 2011 at 11:33:39PM +0200, Peter Zijlstra wrote:
> On Mon, 2011-05-30 at 14:28 -0700, Paul E. McKenney wrote:
> > On Mon, May 30, 2011 at 07:19:49PM +0200, Peter Zijlstra wrote:
> > > On Mon, 2011-05-30 at 09:23 -0700, Paul E. McKenney wrote:
> > > > sp.sched_priority = RCU_KTHREAD_PRIO;
> > > > sched_setscheduler_nocheck(t, SCHED_FIFO, &sp);
> > >
> > > Why are those things RT tasks anyway? The old ksoftirq runs as a regular
> > > task. And once you start boosting things you can boost this into FIFO as
> > > well...
> > >
> > > just wondering..
> >
> > Because priority boosting doesn't help unless the callbacks also run
> > RT priority.
> >
> > I could make it so that they ran as normal tasks if !RCU_BOOST, but
> > they would still need to run as RT tasks for RCU_BOOST. I figured
> > running them the same way in both cases would be simpler.
>
> Ah, I thought you'd boost the threads along with the waiters, to the
> same prio so that they wouldn't disturb higher priority tasks for no
> reason.
I considered that, but working out when it is OK to deboost them is
decidedly non-trivial.
Thanx, Paul
^ permalink raw reply [flat|nested] 22+ messages in thread
* Re: Very high CPU load when idle with 3.0-rc1
2011-05-30 21:35 ` Peter Zijlstra
@ 2011-05-31 1:45 ` Paul E. McKenney
0 siblings, 0 replies; 22+ messages in thread
From: Paul E. McKenney @ 2011-05-31 1:45 UTC (permalink / raw)
To: Peter Zijlstra; +Cc: Damien Wyart, Ingo Molnar, Mike Galbraith, linux-kernel
On Mon, May 30, 2011 at 11:35:28PM +0200, Peter Zijlstra wrote:
> On Mon, 2011-05-30 at 14:29 -0700, Paul E. McKenney wrote:
> > But I should be able to move them back in under "if (cpu_online(cpu))",
> > right?
>
> Yeah, you should be able to put the wakeup in the spawn function when
> made conditional on cpu_online(), although I'm not quite sure how to do
> that for the rnp case, but I guess you'll have a better grasp on that.
OK, will give it a go.
Thanx, Paul
^ permalink raw reply [flat|nested] 22+ messages in thread
* [tip:core/urgent] rcu: Cure load woes
2011-05-30 11:34 ` Peter Zijlstra
` (2 preceding siblings ...)
2011-05-30 16:23 ` Paul E. McKenney
@ 2011-05-31 12:30 ` tip-bot for Peter Zijlstra
3 siblings, 0 replies; 22+ messages in thread
From: tip-bot for Peter Zijlstra @ 2011-05-31 12:30 UTC (permalink / raw)
To: linux-tip-commits
Cc: linux-kernel, paul.mckenney, hpa, mingo, a.p.zijlstra, peterz,
damien.wyart, tglx, mingo
Commit-ID: d72bce0e67e8afc6eb959f656013cbb577426f1e
Gitweb: http://git.kernel.org/tip/d72bce0e67e8afc6eb959f656013cbb577426f1e
Author: Peter Zijlstra <peterz@infradead.org>
AuthorDate: Mon, 30 May 2011 13:34:51 +0200
Committer: Ingo Molnar <mingo@elte.hu>
CommitDate: Tue, 31 May 2011 10:01:48 +0200
rcu: Cure load woes
Commit cc3ce5176d83 (rcu: Start RCU kthreads in TASK_INTERRUPTIBLE
state) fudges a sleeping task' state, resulting in the scheduler seeing
a TASK_UNINTERRUPTIBLE task going to sleep, but a TASK_INTERRUPTIBLE
task waking up. The result is unbalanced load calculation.
The problem that patch tried to address is that the RCU threads could
stay in UNINTERRUPTIBLE state for quite a while and triggering the hung
task detector due to on-demand wake-ups.
Cure the problem differently by always giving the tasks at least one
wake-up once the CPU is fully up and running, this will kick them out of
the initial UNINTERRUPTIBLE state and into the regular INTERRUPTIBLE
wait state.
[ The alternative would be teaching kthread_create() to start threads as
INTERRUPTIBLE but that needs a tad more thought. ]
Reported-by: Damien Wyart <damien.wyart@free.fr>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Acked-by: Paul E. McKenney <paul.mckenney@linaro.org>
Link: http://lkml.kernel.org/r/1306755291.1200.2872.camel@twins
Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
kernel/rcutree.c | 54 ++++++++++++++++++++++++++++++++++++++++-------
kernel/rcutree_plugin.h | 11 ++++++++-
2 files changed, 56 insertions(+), 9 deletions(-)
diff --git a/kernel/rcutree.c b/kernel/rcutree.c
index 77a7671..89419ff 100644
--- a/kernel/rcutree.c
+++ b/kernel/rcutree.c
@@ -1648,7 +1648,6 @@ static int __cpuinit rcu_spawn_one_cpu_kthread(int cpu)
if (IS_ERR(t))
return PTR_ERR(t);
kthread_bind(t, cpu);
- set_task_state(t, TASK_INTERRUPTIBLE);
per_cpu(rcu_cpu_kthread_cpu, cpu) = cpu;
WARN_ON_ONCE(per_cpu(rcu_cpu_kthread_task, cpu) != NULL);
per_cpu(rcu_cpu_kthread_task, cpu) = t;
@@ -1756,7 +1755,6 @@ static int __cpuinit rcu_spawn_one_node_kthread(struct rcu_state *rsp,
if (IS_ERR(t))
return PTR_ERR(t);
raw_spin_lock_irqsave(&rnp->lock, flags);
- set_task_state(t, TASK_INTERRUPTIBLE);
rnp->node_kthread_task = t;
raw_spin_unlock_irqrestore(&rnp->lock, flags);
sp.sched_priority = 99;
@@ -1765,6 +1763,8 @@ static int __cpuinit rcu_spawn_one_node_kthread(struct rcu_state *rsp,
return rcu_spawn_one_boost_kthread(rsp, rnp, rnp_index);
}
+static void rcu_wake_one_boost_kthread(struct rcu_node *rnp);
+
/*
* Spawn all kthreads -- called as soon as the scheduler is running.
*/
@@ -1772,18 +1772,30 @@ static int __init rcu_spawn_kthreads(void)
{
int cpu;
struct rcu_node *rnp;
+ struct task_struct *t;
rcu_kthreads_spawnable = 1;
for_each_possible_cpu(cpu) {
per_cpu(rcu_cpu_has_work, cpu) = 0;
- if (cpu_online(cpu))
+ if (cpu_online(cpu)) {
(void)rcu_spawn_one_cpu_kthread(cpu);
+ t = per_cpu(rcu_cpu_kthread_task, cpu);
+ if (t)
+ wake_up_process(t);
+ }
}
rnp = rcu_get_root(rcu_state);
(void)rcu_spawn_one_node_kthread(rcu_state, rnp);
+ if (rnp->node_kthread_task)
+ wake_up_process(rnp->node_kthread_task);
if (NUM_RCU_NODES > 1) {
- rcu_for_each_leaf_node(rcu_state, rnp)
+ rcu_for_each_leaf_node(rcu_state, rnp) {
(void)rcu_spawn_one_node_kthread(rcu_state, rnp);
+ t = rnp->node_kthread_task;
+ if (t)
+ wake_up_process(t);
+ rcu_wake_one_boost_kthread(rnp);
+ }
}
return 0;
}
@@ -2188,14 +2200,14 @@ rcu_init_percpu_data(int cpu, struct rcu_state *rsp, int preemptible)
raw_spin_unlock_irqrestore(&rsp->onofflock, flags);
}
-static void __cpuinit rcu_online_cpu(int cpu)
+static void __cpuinit rcu_prepare_cpu(int cpu)
{
rcu_init_percpu_data(cpu, &rcu_sched_state, 0);
rcu_init_percpu_data(cpu, &rcu_bh_state, 0);
rcu_preempt_init_percpu_data(cpu);
}
-static void __cpuinit rcu_online_kthreads(int cpu)
+static void __cpuinit rcu_prepare_kthreads(int cpu)
{
struct rcu_data *rdp = per_cpu_ptr(rcu_state->rda, cpu);
struct rcu_node *rnp = rdp->mynode;
@@ -2209,6 +2221,31 @@ static void __cpuinit rcu_online_kthreads(int cpu)
}
/*
+ * kthread_create() creates threads in TASK_UNINTERRUPTIBLE state,
+ * but the RCU threads are woken on demand, and if demand is low this
+ * could be a while triggering the hung task watchdog.
+ *
+ * In order to avoid this, poke all tasks once the CPU is fully
+ * up and running.
+ */
+static void __cpuinit rcu_online_kthreads(int cpu)
+{
+ struct rcu_data *rdp = per_cpu_ptr(rcu_state->rda, cpu);
+ struct rcu_node *rnp = rdp->mynode;
+ struct task_struct *t;
+
+ t = per_cpu(rcu_cpu_kthread_task, cpu);
+ if (t)
+ wake_up_process(t);
+
+ t = rnp->node_kthread_task;
+ if (t)
+ wake_up_process(t);
+
+ rcu_wake_one_boost_kthread(rnp);
+}
+
+/*
* Handle CPU online/offline notification events.
*/
static int __cpuinit rcu_cpu_notify(struct notifier_block *self,
@@ -2221,10 +2258,11 @@ static int __cpuinit rcu_cpu_notify(struct notifier_block *self,
switch (action) {
case CPU_UP_PREPARE:
case CPU_UP_PREPARE_FROZEN:
- rcu_online_cpu(cpu);
- rcu_online_kthreads(cpu);
+ rcu_prepare_cpu(cpu);
+ rcu_prepare_kthreads(cpu);
break;
case CPU_ONLINE:
+ rcu_online_kthreads(cpu);
case CPU_DOWN_FAILED:
rcu_node_kthread_setaffinity(rnp, -1);
rcu_cpu_kthread_setrt(cpu, 1);
diff --git a/kernel/rcutree_plugin.h b/kernel/rcutree_plugin.h
index a767b7d..c8bff30 100644
--- a/kernel/rcutree_plugin.h
+++ b/kernel/rcutree_plugin.h
@@ -1295,7 +1295,6 @@ static int __cpuinit rcu_spawn_one_boost_kthread(struct rcu_state *rsp,
if (IS_ERR(t))
return PTR_ERR(t);
raw_spin_lock_irqsave(&rnp->lock, flags);
- set_task_state(t, TASK_INTERRUPTIBLE);
rnp->boost_kthread_task = t;
raw_spin_unlock_irqrestore(&rnp->lock, flags);
sp.sched_priority = RCU_KTHREAD_PRIO;
@@ -1303,6 +1302,12 @@ static int __cpuinit rcu_spawn_one_boost_kthread(struct rcu_state *rsp,
return 0;
}
+static void __cpuinit rcu_wake_one_boost_kthread(struct rcu_node *rnp)
+{
+ if (rnp->boost_kthread_task)
+ wake_up_process(rnp->boost_kthread_task);
+}
+
#else /* #ifdef CONFIG_RCU_BOOST */
static void rcu_initiate_boost(struct rcu_node *rnp, unsigned long flags)
@@ -1326,6 +1331,10 @@ static int __cpuinit rcu_spawn_one_boost_kthread(struct rcu_state *rsp,
return 0;
}
+static void __cpuinit rcu_wake_one_boost_kthread(struct rcu_node *rnp)
+{
+}
+
#endif /* #else #ifdef CONFIG_RCU_BOOST */
#ifndef CONFIG_SMP
^ permalink raw reply related [flat|nested] 22+ messages in thread
* Re: Very high CPU load when idle with 3.0-rc1
2011-05-31 1:45 ` Paul E. McKenney
@ 2011-06-01 11:05 ` Peter Zijlstra
2011-06-01 14:37 ` Paul E. McKenney
0 siblings, 1 reply; 22+ messages in thread
From: Peter Zijlstra @ 2011-06-01 11:05 UTC (permalink / raw)
To: paulmck; +Cc: Damien Wyart, Ingo Molnar, Mike Galbraith, linux-kernel
On Mon, 2011-05-30 at 18:45 -0700, Paul E. McKenney wrote:
> > > Because priority boosting doesn't help unless the callbacks also run
> > > RT priority.
> > >
> > > I could make it so that they ran as normal tasks if !RCU_BOOST, but
> > > they would still need to run as RT tasks for RCU_BOOST. I figured
> > > running them the same way in both cases would be simpler.
> >
> > Ah, I thought you'd boost the threads along with the waiters, to the
> > same prio so that they wouldn't disturb higher priority tasks for no
> > reason.
>
> I considered that, but working out when it is OK to deboost them is
> decidedly non-trivial.
Where exactly is the problem there? The boost lasts for as long as it
takes to finish the grace period, right? There's a distinct set of
callbacks associated with each grace-period, right? In which case you
can de-boost your thread the moment you're done processing that set.
Or am I simply confused about how all this is supposed to work?
^ permalink raw reply [flat|nested] 22+ messages in thread
* Re: Very high CPU load when idle with 3.0-rc1
2011-06-01 11:05 ` Peter Zijlstra
@ 2011-06-01 14:37 ` Paul E. McKenney
2011-06-01 16:58 ` Peter Zijlstra
0 siblings, 1 reply; 22+ messages in thread
From: Paul E. McKenney @ 2011-06-01 14:37 UTC (permalink / raw)
To: Peter Zijlstra; +Cc: Damien Wyart, Ingo Molnar, Mike Galbraith, linux-kernel
On Wed, Jun 01, 2011 at 01:05:39PM +0200, Peter Zijlstra wrote:
> On Mon, 2011-05-30 at 18:45 -0700, Paul E. McKenney wrote:
> > > > Because priority boosting doesn't help unless the callbacks also run
> > > > RT priority.
> > > >
> > > > I could make it so that they ran as normal tasks if !RCU_BOOST, but
> > > > they would still need to run as RT tasks for RCU_BOOST. I figured
> > > > running them the same way in both cases would be simpler.
> > >
> > > Ah, I thought you'd boost the threads along with the waiters, to the
> > > same prio so that they wouldn't disturb higher priority tasks for no
> > > reason.
> >
> > I considered that, but working out when it is OK to deboost them is
> > decidedly non-trivial.
>
> Where exactly is the problem there? The boost lasts for as long as it
> takes to finish the grace period, right? There's a distinct set of
> callbacks associated with each grace-period, right? In which case you
> can de-boost your thread the moment you're done processing that set.
>
> Or am I simply confused about how all this is supposed to work?
The main complications are: (1) the fact that it is hard to tell exactly
which grace period to wait for, this one or the next one, and (2) the
fact that callbacks get shuffled when CPUs go offline.
That said, it might be possible if we are willing to live with some
approximate behavior. For example, always waiting for the next grace
period (rather than the current one) to finish, and boosting through the
extra callbacks in case where a given CPU "adopts" callbacks that must
be boosted when that CPU also has some callbacks whose priority must be
boosted and some that need not be.
The reason I am not all that excited about taking this approach is that
it doesn't help worst-case latency.
Plus the current implementation is just a less-precise approximation.
(Sorry, couldn't resist!)
Thanx, Paul
^ permalink raw reply [flat|nested] 22+ messages in thread
* Re: Very high CPU load when idle with 3.0-rc1
2011-06-01 14:37 ` Paul E. McKenney
@ 2011-06-01 16:58 ` Peter Zijlstra
2011-06-01 18:19 ` Paul E. McKenney
0 siblings, 1 reply; 22+ messages in thread
From: Peter Zijlstra @ 2011-06-01 16:58 UTC (permalink / raw)
To: paulmck; +Cc: Damien Wyart, Ingo Molnar, Mike Galbraith, linux-kernel
On Wed, 2011-06-01 at 07:37 -0700, Paul E. McKenney wrote:
> > > I considered that, but working out when it is OK to deboost them is
> > > decidedly non-trivial.
> >
> > Where exactly is the problem there? The boost lasts for as long as it
> > takes to finish the grace period, right? There's a distinct set of
> > callbacks associated with each grace-period, right? In which case you
> > can de-boost your thread the moment you're done processing that set.
> >
> > Or am I simply confused about how all this is supposed to work?
>
> The main complications are: (1) the fact that it is hard to tell exactly
> which grace period to wait for, this one or the next one, and (2) the
> fact that callbacks get shuffled when CPUs go offline.
I can't say I would worry too much about 2, hotplug and RT don't really
go hand-in-hand anyway.
On 1 however, is that due to the boost condition?
I must admit that my thought there is somewhat fuzzy since I just
realized I don't actually know the exact condition to start boosting,
but suppose we boost because the queue is too large, then waiting for
the current grace period might not reduce the queue length, as most
callbacks might actually be for the next.
If however the condition is grace period duration, then completion of
the current grace period is sufficient, since the whole boost condition
is defined as such. [ if the next is also exceeding the time limit,
that's a whole next boost ]
> That said, it might be possible if we are willing to live with some
> approximate behavior. For example, always waiting for the next grace
> period (rather than the current one) to finish, and boosting through the
> extra callbacks in case where a given CPU "adopts" callbacks that must
> be boosted when that CPU also has some callbacks whose priority must be
> boosted and some that need not be.
That might make sense, but I must admit to not fully understanding the
whole current/next thing yet.
> The reason I am not all that excited about taking this approach is that
> it doesn't help worst-case latency.
Well, not running at the top most prio does help those tasks running at
a higher priority, so in that regard it does reduce the jitter for a
number of tasks.
Also, I guess there's the whole question of what prio to boost to which
I somehow totally forgot about, which is a non-trivial thing in its own
right, since there isn't really someone blocked on grace period
completion (although in the special case of someone calling sync_rcu it
is clear).
> Plus the current implementation is just a less-precise approximation.
> (Sorry, couldn't resist!)
Appreciated, on a similar note I still need to actually look at all this
(preempt) tree-rcu stuff to learn how exactly it works.
^ permalink raw reply [flat|nested] 22+ messages in thread
* Re: Very high CPU load when idle with 3.0-rc1
2011-06-01 16:58 ` Peter Zijlstra
@ 2011-06-01 18:19 ` Paul E. McKenney
0 siblings, 0 replies; 22+ messages in thread
From: Paul E. McKenney @ 2011-06-01 18:19 UTC (permalink / raw)
To: Peter Zijlstra; +Cc: Damien Wyart, Ingo Molnar, Mike Galbraith, linux-kernel
On Wed, Jun 01, 2011 at 06:58:33PM +0200, Peter Zijlstra wrote:
> On Wed, 2011-06-01 at 07:37 -0700, Paul E. McKenney wrote:
>
> > > > I considered that, but working out when it is OK to deboost them is
> > > > decidedly non-trivial.
> > >
> > > Where exactly is the problem there? The boost lasts for as long as it
> > > takes to finish the grace period, right? There's a distinct set of
> > > callbacks associated with each grace-period, right? In which case you
> > > can de-boost your thread the moment you're done processing that set.
> > >
> > > Or am I simply confused about how all this is supposed to work?
> >
> > The main complications are: (1) the fact that it is hard to tell exactly
> > which grace period to wait for, this one or the next one, and (2) the
> > fact that callbacks get shuffled when CPUs go offline.
>
> I can't say I would worry too much about 2, hotplug and RT don't really
> go hand-in-hand anyway.
Perhaps not, but I do need to handle the combination.
> On 1 however, is that due to the boost condition?
The boost condition is straightforward. By default, if a grace period
lasts for more than 500 milliseconds, boosting starts. So the obvious
answer is "deboost when the grace period ends", but different CPUs become
aware of the end at different times, so it is still a bit fuzzy.
> I must admit that my thought there is somewhat fuzzy since I just
> realized I don't actually know the exact condition to start boosting,
> but suppose we boost because the queue is too large, then waiting for
> the current grace period might not reduce the queue length, as most
> callbacks might actually be for the next.
>
> If however the condition is grace period duration, then completion of
> the current grace period is sufficient, since the whole boost condition
> is defined as such. [ if the next is also exceeding the time limit,
> that's a whole next boost ]
Don't get me wrong -- it can be done. Just a bit ugly due to the
fact that different CPUs have different views of when the grace period
ends.
> > That said, it might be possible if we are willing to live with some
> > approximate behavior. For example, always waiting for the next grace
> > period (rather than the current one) to finish, and boosting through the
> > extra callbacks in case where a given CPU "adopts" callbacks that must
> > be boosted when that CPU also has some callbacks whose priority must be
> > boosted and some that need not be.
>
> That might make sense, but I must admit to not fully understanding the
> whole current/next thing yet.
And I cannot claim to have thought it through thoroughly, for that
matter.
> > The reason I am not all that excited about taking this approach is that
> > it doesn't help worst-case latency.
>
> Well, not running at the top most prio does help those tasks running at
> a higher priority, so in that regard it does reduce the jitter for a
> number of tasks.
By default, boosting is to RT prio 1, so shouldn't bother most RT
processes.
> Also, I guess there's the whole question of what prio to boost to which
> I somehow totally forgot about, which is a non-trivial thing in its own
> right, since there isn't really someone blocked on grace period
> completion (although in the special case of someone calling sync_rcu it
> is clear).
I am not all that excited about synchronize_rcu() controlling the boost
priority, but having synchronize_rcu_expedited() do so might make sense.
But I would want someone to come up with a situation needing this first.
Other than that, it is similar to working out what priority softirq
should run at in PREEMPT_RT.
> > Plus the current implementation is just a less-precise approximation.
> > (Sorry, couldn't resist!)
>
> Appreciated, on a similar note I still need to actually look at all this
> (preempt) tree-rcu stuff to learn how exactly it works.
And I do need to document it. For one thing, I usually find a few bugs
when I do that. For another, the previous documentation is getting quite
dated.
Thanx, Paul
^ permalink raw reply [flat|nested] 22+ messages in thread
end of thread, other threads:[~2011-06-01 18:19 UTC | newest]
Thread overview: 22+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2011-05-30 5:59 Very high CPU load when idle with 3.0-rc1 Damien Wyart
2011-05-30 11:34 ` Peter Zijlstra
2011-05-30 12:17 ` Ingo Molnar
2011-05-30 13:10 ` Mike Galbraith
2011-05-30 16:23 ` Paul E. McKenney
2011-05-30 16:41 ` Paul E. McKenney
2011-05-30 16:47 ` Peter Zijlstra
2011-05-30 16:46 ` Peter Zijlstra
2011-05-30 21:29 ` Paul E. McKenney
2011-05-30 21:35 ` Peter Zijlstra
2011-05-31 1:45 ` Paul E. McKenney
2011-05-30 17:19 ` Peter Zijlstra
2011-05-30 21:28 ` Paul E. McKenney
2011-05-30 21:33 ` Peter Zijlstra
2011-05-31 1:45 ` Paul E. McKenney
2011-06-01 11:05 ` Peter Zijlstra
2011-06-01 14:37 ` Paul E. McKenney
2011-06-01 16:58 ` Peter Zijlstra
2011-06-01 18:19 ` Paul E. McKenney
2011-05-31 12:30 ` [tip:core/urgent] rcu: Cure load woes tip-bot for Peter Zijlstra
2011-05-30 11:50 ` Very high CPU load when idle with 3.0-rc1 Damien Wyart
2011-05-30 12:22 ` Morten P.D. Stevens
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.