From: "Franky Lin" <frankyl@broadcom.com>
To: gregkh@suse.de
Cc: devel@linuxdriverproject.org, linux-wireless@vger.kernel.org
Subject: [PATCH 014/119] staging: brcm80211: remove unused macro definitions from pmu.c
Date: Wed, 29 Jun 2011 16:46:38 -0700 [thread overview]
Message-ID: <1309391303-22741-15-git-send-email-frankyl@broadcom.com> (raw)
In-Reply-To: <1309391303-22741-1-git-send-email-frankyl@broadcom.com>
From: Arend van Spriel <arend@broadcom.com>
The source file pmu.c contained a large number of definitions that
are no longer needed and have been removed.
Signed-off-by: Arend van Spriel <arend@broadcom.com>
Reviewed-by: Roland Vossen <rvossen@broadcom.com>
---
drivers/staging/brcm80211/brcmsmac/pmu.c | 491 ------------------------------
1 files changed, 0 insertions(+), 491 deletions(-)
diff --git a/drivers/staging/brcm80211/brcmsmac/pmu.c b/drivers/staging/brcm80211/brcmsmac/pmu.c
index d7ca7ed..6508243 100644
--- a/drivers/staging/brcm80211/brcmsmac/pmu.c
+++ b/drivers/staging/brcm80211/brcmsmac/pmu.c
@@ -25,11 +25,6 @@
#include "pmu.h"
/*
- * d11 slow to fast clock transition time in slow clock cycles
- */
-#define D11SCC_SLOW2FAST_TRANSITION 2
-
-/*
* external LPO crystal frequency
*/
#define EXT_ILP_HZ 32768
@@ -41,93 +36,6 @@
*/
#define ILP_CALC_DUR 10
-/*
- * FVCO frequency
- */
-#define FVCO_880 880000 /* 880MHz */
-#define FVCO_1760 1760000 /* 1760MHz */
-#define FVCO_1440 1440000 /* 1440MHz */
-#define FVCO_960 960000 /* 960MHz */
-
-/*
- * PMU crystal table indices for 1440MHz fvco
- */
-#define PMU1_XTALTAB0_1440_12000K 0
-#define PMU1_XTALTAB0_1440_13000K 1
-#define PMU1_XTALTAB0_1440_14400K 2
-#define PMU1_XTALTAB0_1440_15360K 3
-#define PMU1_XTALTAB0_1440_16200K 4
-#define PMU1_XTALTAB0_1440_16800K 5
-#define PMU1_XTALTAB0_1440_19200K 6
-#define PMU1_XTALTAB0_1440_19800K 7
-#define PMU1_XTALTAB0_1440_20000K 8
-#define PMU1_XTALTAB0_1440_25000K 9
-#define PMU1_XTALTAB0_1440_26000K 10
-#define PMU1_XTALTAB0_1440_30000K 11
-#define PMU1_XTALTAB0_1440_37400K 12
-#define PMU1_XTALTAB0_1440_38400K 13
-#define PMU1_XTALTAB0_1440_40000K 14
-#define PMU1_XTALTAB0_1440_48000K 15
-
-/*
- * PMU crystal table indices for 960MHz fvco
- */
-#define PMU1_XTALTAB0_960_12000K 0
-#define PMU1_XTALTAB0_960_13000K 1
-#define PMU1_XTALTAB0_960_14400K 2
-#define PMU1_XTALTAB0_960_15360K 3
-#define PMU1_XTALTAB0_960_16200K 4
-#define PMU1_XTALTAB0_960_16800K 5
-#define PMU1_XTALTAB0_960_19200K 6
-#define PMU1_XTALTAB0_960_19800K 7
-#define PMU1_XTALTAB0_960_20000K 8
-#define PMU1_XTALTAB0_960_25000K 9
-#define PMU1_XTALTAB0_960_26000K 10
-#define PMU1_XTALTAB0_960_30000K 11
-#define PMU1_XTALTAB0_960_37400K 12
-#define PMU1_XTALTAB0_960_38400K 13
-#define PMU1_XTALTAB0_960_40000K 14
-#define PMU1_XTALTAB0_960_48000K 15
-
-/*
- * PMU crystal table indices for 880MHz fvco
- */
-#define PMU1_XTALTAB0_880_12000K 0
-#define PMU1_XTALTAB0_880_13000K 1
-#define PMU1_XTALTAB0_880_14400K 2
-#define PMU1_XTALTAB0_880_15360K 3
-#define PMU1_XTALTAB0_880_16200K 4
-#define PMU1_XTALTAB0_880_16800K 5
-#define PMU1_XTALTAB0_880_19200K 6
-#define PMU1_XTALTAB0_880_19800K 7
-#define PMU1_XTALTAB0_880_20000K 8
-#define PMU1_XTALTAB0_880_24000K 9
-#define PMU1_XTALTAB0_880_25000K 10
-#define PMU1_XTALTAB0_880_26000K 11
-#define PMU1_XTALTAB0_880_30000K 12
-#define PMU1_XTALTAB0_880_37400K 13
-#define PMU1_XTALTAB0_880_38400K 14
-#define PMU1_XTALTAB0_880_40000K 15
-
-/*
- * crystal frequency values
- */
-#define XTAL_FREQ_24000MHZ 24000
-#define XTAL_FREQ_30000MHZ 30000
-#define XTAL_FREQ_37400MHZ 37400
-#define XTAL_FREQ_48000MHZ 48000
-
-/*
- * Resource dependancies mask change action
- *
- * @RES_DEPEND_SET: Override the dependancies mask
- * @RES_DEPEND_ADD: Add to the dependancies mask
- * @RES_DEPEND_REMOVE: Remove from the dependancies mask
- */
-#define RES_DEPEND_SET 0
-#define RES_DEPEND_ADD 1
-#define RES_DEPEND_REMOVE -1
-
/* Fields in pmucontrol */
#define PCTL_ILP_DIV_MASK 0xffff0000
#define PCTL_ILP_DIV_SHIFT 16
@@ -140,24 +48,12 @@
#define PCTL_ILP_DIV_EN 0x00000002
#define PCTL_LPO_SEL 0x00000001
-/* Fields in clkstretch */
-#define CSTRETCH_HT 0xffff0000
-#define CSTRETCH_ALP 0x0000ffff
-
-/* d11 slow to fast clock transition time in slow clock cycles */
-#define D11SCC_SLOW2FAST_TRANSITION 2
-
/* ILP clock */
#define ILP_CLOCK 32000
/* ALP clock on pre-PMU chips */
#define ALP_CLOCK 20000000
-/* HT clock */
-#define HT_CLOCK 80000000
-
-#define OTPS_READY 0x00001000
-
/* pmustatus */
#define PST_EXTLPOAVAIL 0x0100
#define PST_WDRESET 0x0080
@@ -170,411 +66,27 @@
#define PST_HTAVAIL 0x0004
#define PST_RESINIT 0x0003
-/* PMU Resource Request Timer registers */
-/* This is based on PmuRev0 */
-#define PRRT_TIME_MASK 0x03ff
-#define PRRT_INTEN 0x0400
-#define PRRT_REQ_ACTIVE 0x0800
-#define PRRT_ALP_REQ 0x1000
-#define PRRT_HT_REQ 0x2000
-
/* PMU resource bit position */
#define PMURES_BIT(bit) (1 << (bit))
-/* PMU resource number limit */
-#define PMURES_MAX_RESNUM 30
-
-/* PMU chip control0 register */
-#define PMU_CHIPCTL0 0
-
-/* PMU chip control1 register */
-#define PMU_CHIPCTL1 1
-#define PMU_CC1_RXC_DLL_BYPASS 0x00010000
-
-#define PMU_CC1_IF_TYPE_MASK 0x00000030
-#define PMU_CC1_IF_TYPE_RMII 0x00000000
-#define PMU_CC1_IF_TYPE_MII 0x00000010
-#define PMU_CC1_IF_TYPE_RGMII 0x00000020
-
-#define PMU_CC1_SW_TYPE_MASK 0x000000c0
-#define PMU_CC1_SW_TYPE_EPHY 0x00000000
-#define PMU_CC1_SW_TYPE_EPHYMII 0x00000040
-#define PMU_CC1_SW_TYPE_EPHYRMII 0x00000080
-#define PMU_CC1_SW_TYPE_RGMII 0x000000c0
-
/* PMU corerev and chip specific PLL controls.
* PMU<rev>_PLL<num>_XX where <rev> is PMU corerev and <num> is an arbitrary number
* to differentiate different PLLs controlled by the same PMU rev.
*/
/* pllcontrol registers */
-/* PDIV, div_phy, div_arm, div_adc, dith_sel, ioff, kpd_scale, lsb_sel, mash_sel, lf_c & lf_r */
-#define PMU0_PLL0_PLLCTL0 0
-#define PMU0_PLL0_PC0_PDIV_MASK 1
-#define PMU0_PLL0_PC0_PDIV_FREQ 25000
-#define PMU0_PLL0_PC0_DIV_ARM_MASK 0x00000038
-#define PMU0_PLL0_PC0_DIV_ARM_SHIFT 3
-#define PMU0_PLL0_PC0_DIV_ARM_BASE 8
-
-/* PC0_DIV_ARM for PLLOUT_ARM */
-#define PMU0_PLL0_PC0_DIV_ARM_110MHZ 0
-#define PMU0_PLL0_PC0_DIV_ARM_97_7MHZ 1
-#define PMU0_PLL0_PC0_DIV_ARM_88MHZ 2
-#define PMU0_PLL0_PC0_DIV_ARM_80MHZ 3 /* Default */
-#define PMU0_PLL0_PC0_DIV_ARM_73_3MHZ 4
-#define PMU0_PLL0_PC0_DIV_ARM_67_7MHZ 5
-#define PMU0_PLL0_PC0_DIV_ARM_62_9MHZ 6
-#define PMU0_PLL0_PC0_DIV_ARM_58_6MHZ 7
-
-/* Wildcard base, stop_mod, en_lf_tp, en_cal & lf_r2 */
-#define PMU0_PLL0_PLLCTL1 1
-#define PMU0_PLL0_PC1_WILD_INT_MASK 0xf0000000
-#define PMU0_PLL0_PC1_WILD_INT_SHIFT 28
-#define PMU0_PLL0_PC1_WILD_FRAC_MASK 0x0fffff00
-#define PMU0_PLL0_PC1_WILD_FRAC_SHIFT 8
-#define PMU0_PLL0_PC1_STOP_MOD 0x00000040
-
-/* Wildcard base, vco_calvar, vco_swc, vco_var_selref, vso_ical & vco_sel_avdd */
-#define PMU0_PLL0_PLLCTL2 2
-#define PMU0_PLL0_PC2_WILD_INT_MASK 0xf
-#define PMU0_PLL0_PC2_WILD_INT_SHIFT 4
-
-/* pllcontrol registers */
/* ndiv_pwrdn, pwrdn_ch<x>, refcomp_pwrdn, dly_ch<x>, p1div, p2div, _bypass_sdmod */
#define PMU1_PLL0_PLLCTL0 0
-#define PMU1_PLL0_PC0_P1DIV_MASK 0x00f00000
-#define PMU1_PLL0_PC0_P1DIV_SHIFT 20
-#define PMU1_PLL0_PC0_P2DIV_MASK 0x0f000000
-#define PMU1_PLL0_PC0_P2DIV_SHIFT 24
-
-/* m<x>div */
#define PMU1_PLL0_PLLCTL1 1
-#define PMU1_PLL0_PC1_M1DIV_MASK 0x000000ff
-#define PMU1_PLL0_PC1_M1DIV_SHIFT 0
-#define PMU1_PLL0_PC1_M2DIV_MASK 0x0000ff00
-#define PMU1_PLL0_PC1_M2DIV_SHIFT 8
-#define PMU1_PLL0_PC1_M3DIV_MASK 0x00ff0000
-#define PMU1_PLL0_PC1_M3DIV_SHIFT 16
-#define PMU1_PLL0_PC1_M4DIV_MASK 0xff000000
-#define PMU1_PLL0_PC1_M4DIV_SHIFT 24
-
-#define PMU1_PLL0_CHIPCTL0 0
-#define PMU1_PLL0_CHIPCTL1 1
-#define PMU1_PLL0_CHIPCTL2 2
-
-#define DOT11MAC_880MHZ_CLK_DIVISOR_SHIFT 8
-#define DOT11MAC_880MHZ_CLK_DIVISOR_MASK (0xFF << DOT11MAC_880MHZ_CLK_DIVISOR_SHIFT)
-#define DOT11MAC_880MHZ_CLK_DIVISOR_VAL (0xE << DOT11MAC_880MHZ_CLK_DIVISOR_SHIFT)
-
-/* m<x>div, ndiv_dither_mfb, ndiv_mode, ndiv_int */
#define PMU1_PLL0_PLLCTL2 2
-#define PMU1_PLL0_PC2_M5DIV_MASK 0x000000ff
-#define PMU1_PLL0_PC2_M5DIV_SHIFT 0
-#define PMU1_PLL0_PC2_M6DIV_MASK 0x0000ff00
-#define PMU1_PLL0_PC2_M6DIV_SHIFT 8
-#define PMU1_PLL0_PC2_NDIV_MODE_MASK 0x000e0000
-#define PMU1_PLL0_PC2_NDIV_MODE_SHIFT 17
-#define PMU1_PLL0_PC2_NDIV_MODE_MASH 1
-#define PMU1_PLL0_PC2_NDIV_MODE_MFB 2 /* recommended for 4319 */
-#define PMU1_PLL0_PC2_NDIV_INT_MASK 0x1ff00000
-#define PMU1_PLL0_PC2_NDIV_INT_SHIFT 20
-
-/* ndiv_frac */
#define PMU1_PLL0_PLLCTL3 3
-#define PMU1_PLL0_PC3_NDIV_FRAC_MASK 0x00ffffff
-#define PMU1_PLL0_PC3_NDIV_FRAC_SHIFT 0
-
-/* pll_ctrl */
#define PMU1_PLL0_PLLCTL4 4
-
-/* pll_ctrl, vco_rng, clkdrive_ch<x> */
#define PMU1_PLL0_PLLCTL5 5
-#define PMU1_PLL0_PC5_CLK_DRV_MASK 0xffffff00
-#define PMU1_PLL0_PC5_CLK_DRV_SHIFT 8
-
-/* PMU rev 2 control words */
-#define PMU2_PHY_PLL_PLLCTL 4
-#define PMU2_SI_PLL_PLLCTL 10
-
-/* PMU rev 2 */
-/* pllcontrol registers */
-/* ndiv_pwrdn, pwrdn_ch<x>, refcomp_pwrdn, dly_ch<x>, p1div, p2div, _bypass_sdmod */
-#define PMU2_PLL_PLLCTL0 0
-#define PMU2_PLL_PC0_P1DIV_MASK 0x00f00000
-#define PMU2_PLL_PC0_P1DIV_SHIFT 20
-#define PMU2_PLL_PC0_P2DIV_MASK 0x0f000000
-#define PMU2_PLL_PC0_P2DIV_SHIFT 24
-
-/* m<x>div */
-#define PMU2_PLL_PLLCTL1 1
-#define PMU2_PLL_PC1_M1DIV_MASK 0x000000ff
-#define PMU2_PLL_PC1_M1DIV_SHIFT 0
-#define PMU2_PLL_PC1_M2DIV_MASK 0x0000ff00
-#define PMU2_PLL_PC1_M2DIV_SHIFT 8
-#define PMU2_PLL_PC1_M3DIV_MASK 0x00ff0000
-#define PMU2_PLL_PC1_M3DIV_SHIFT 16
-#define PMU2_PLL_PC1_M4DIV_MASK 0xff000000
-#define PMU2_PLL_PC1_M4DIV_SHIFT 24
-
-/* m<x>div, ndiv_dither_mfb, ndiv_mode, ndiv_int */
-#define PMU2_PLL_PLLCTL2 2
-#define PMU2_PLL_PC2_M5DIV_MASK 0x000000ff
-#define PMU2_PLL_PC2_M5DIV_SHIFT 0
-#define PMU2_PLL_PC2_M6DIV_MASK 0x0000ff00
-#define PMU2_PLL_PC2_M6DIV_SHIFT 8
-#define PMU2_PLL_PC2_NDIV_MODE_MASK 0x000e0000
-#define PMU2_PLL_PC2_NDIV_MODE_SHIFT 17
-#define PMU2_PLL_PC2_NDIV_INT_MASK 0x1ff00000
-#define PMU2_PLL_PC2_NDIV_INT_SHIFT 20
-
-/* ndiv_frac */
-#define PMU2_PLL_PLLCTL3 3
-#define PMU2_PLL_PC3_NDIV_FRAC_MASK 0x00ffffff
-#define PMU2_PLL_PC3_NDIV_FRAC_SHIFT 0
-
-/* pll_ctrl */
-#define PMU2_PLL_PLLCTL4 4
-
-/* pll_ctrl, vco_rng, clkdrive_ch<x> */
-#define PMU2_PLL_PLLCTL5 5
-#define PMU2_PLL_PC5_CLKDRIVE_CH1_MASK 0x00000f00
-#define PMU2_PLL_PC5_CLKDRIVE_CH1_SHIFT 8
-#define PMU2_PLL_PC5_CLKDRIVE_CH2_MASK 0x0000f000
-#define PMU2_PLL_PC5_CLKDRIVE_CH2_SHIFT 12
-#define PMU2_PLL_PC5_CLKDRIVE_CH3_MASK 0x000f0000
-#define PMU2_PLL_PC5_CLKDRIVE_CH3_SHIFT 16
-#define PMU2_PLL_PC5_CLKDRIVE_CH4_MASK 0x00f00000
-#define PMU2_PLL_PC5_CLKDRIVE_CH4_SHIFT 20
-#define PMU2_PLL_PC5_CLKDRIVE_CH5_MASK 0x0f000000
-#define PMU2_PLL_PC5_CLKDRIVE_CH5_SHIFT 24
-#define PMU2_PLL_PC5_CLKDRIVE_CH6_MASK 0xf0000000
-#define PMU2_PLL_PC5_CLKDRIVE_CH6_SHIFT 28
-
-/* PMU rev 5 (& 6) */
-#define PMU5_PLL_P1P2_OFF 0
-#define PMU5_PLL_P1_MASK 0x0f000000
-#define PMU5_PLL_P1_SHIFT 24
-#define PMU5_PLL_P2_MASK 0x00f00000
-#define PMU5_PLL_P2_SHIFT 20
-#define PMU5_PLL_M14_OFF 1
-#define PMU5_PLL_MDIV_MASK 0x000000ff
-#define PMU5_PLL_MDIV_WIDTH 8
-#define PMU5_PLL_NM5_OFF 2
-#define PMU5_PLL_NDIV_MASK 0xfff00000
-#define PMU5_PLL_NDIV_SHIFT 20
-#define PMU5_PLL_NDIV_MODE_MASK 0x000e0000
-#define PMU5_PLL_NDIV_MODE_SHIFT 17
-#define PMU5_PLL_FMAB_OFF 3
-#define PMU5_PLL_MRAT_MASK 0xf0000000
-#define PMU5_PLL_MRAT_SHIFT 28
-#define PMU5_PLL_ABRAT_MASK 0x08000000
-#define PMU5_PLL_ABRAT_SHIFT 27
-#define PMU5_PLL_FDIV_MASK 0x07ffffff
-#define PMU5_PLL_PLLCTL_OFF 4
-#define PMU5_PLL_PCHI_OFF 5
-#define PMU5_PLL_PCHI_MASK 0x0000003f
/* pmu XtalFreqRatio */
#define PMU_XTALFREQ_REG_ILPCTR_MASK 0x00001FFF
#define PMU_XTALFREQ_REG_MEASURE_MASK 0x80000000
#define PMU_XTALFREQ_REG_MEASURE_SHIFT 31
-/* Divider allocation in 4716/47162/5356/5357 */
-#define PMU5_MAINPLL_CPU 1
-#define PMU5_MAINPLL_MEM 2
-#define PMU5_MAINPLL_SI 3
-
-#define PMU7_PLL_PLLCTL7 7
-#define PMU7_PLL_PLLCTL8 8
-#define PMU7_PLL_PLLCTL11 11
-
-/* PLL usage in 4716/47162 */
-#define PMU4716_MAINPLL_PLL0 12
-
-/* PLL usage in 5356/5357 */
-#define PMU5356_MAINPLL_PLL0 0
-#define PMU5357_MAINPLL_PLL0 0
-
-/* 4328 resources */
-#define RES4328_EXT_SWITCHER_PWM 0 /* 0x00001 */
-#define RES4328_BB_SWITCHER_PWM 1 /* 0x00002 */
-#define RES4328_BB_SWITCHER_BURST 2 /* 0x00004 */
-#define RES4328_BB_EXT_SWITCHER_BURST 3 /* 0x00008 */
-#define RES4328_ILP_REQUEST 4 /* 0x00010 */
-#define RES4328_RADIO_SWITCHER_PWM 5 /* 0x00020 */
-#define RES4328_RADIO_SWITCHER_BURST 6 /* 0x00040 */
-#define RES4328_ROM_SWITCH 7 /* 0x00080 */
-#define RES4328_PA_REF_LDO 8 /* 0x00100 */
-#define RES4328_RADIO_LDO 9 /* 0x00200 */
-#define RES4328_AFE_LDO 10 /* 0x00400 */
-#define RES4328_PLL_LDO 11 /* 0x00800 */
-#define RES4328_BG_FILTBYP 12 /* 0x01000 */
-#define RES4328_TX_FILTBYP 13 /* 0x02000 */
-#define RES4328_RX_FILTBYP 14 /* 0x04000 */
-#define RES4328_XTAL_PU 15 /* 0x08000 */
-#define RES4328_XTAL_EN 16 /* 0x10000 */
-#define RES4328_BB_PLL_FILTBYP 17 /* 0x20000 */
-#define RES4328_RF_PLL_FILTBYP 18 /* 0x40000 */
-#define RES4328_BB_PLL_PU 19 /* 0x80000 */
-
-/* 4325 A0/A1 resources */
-#define RES4325_BUCK_BOOST_BURST 0 /* 0x00000001 */
-#define RES4325_CBUCK_BURST 1 /* 0x00000002 */
-#define RES4325_CBUCK_PWM 2 /* 0x00000004 */
-#define RES4325_CLDO_CBUCK_BURST 3 /* 0x00000008 */
-#define RES4325_CLDO_CBUCK_PWM 4 /* 0x00000010 */
-#define RES4325_BUCK_BOOST_PWM 5 /* 0x00000020 */
-#define RES4325_ILP_REQUEST 6 /* 0x00000040 */
-#define RES4325_ABUCK_BURST 7 /* 0x00000080 */
-#define RES4325_ABUCK_PWM 8 /* 0x00000100 */
-#define RES4325_LNLDO1_PU 9 /* 0x00000200 */
-#define RES4325_OTP_PU 10 /* 0x00000400 */
-#define RES4325_LNLDO3_PU 11 /* 0x00000800 */
-#define RES4325_LNLDO4_PU 12 /* 0x00001000 */
-#define RES4325_XTAL_PU 13 /* 0x00002000 */
-#define RES4325_ALP_AVAIL 14 /* 0x00004000 */
-#define RES4325_RX_PWRSW_PU 15 /* 0x00008000 */
-#define RES4325_TX_PWRSW_PU 16 /* 0x00010000 */
-#define RES4325_RFPLL_PWRSW_PU 17 /* 0x00020000 */
-#define RES4325_LOGEN_PWRSW_PU 18 /* 0x00040000 */
-#define RES4325_AFE_PWRSW_PU 19 /* 0x00080000 */
-#define RES4325_BBPLL_PWRSW_PU 20 /* 0x00100000 */
-#define RES4325_HT_AVAIL 21 /* 0x00200000 */
-
-/* 4325 B0/C0 resources */
-#define RES4325B0_CBUCK_LPOM 1 /* 0x00000002 */
-#define RES4325B0_CBUCK_BURST 2 /* 0x00000004 */
-#define RES4325B0_CBUCK_PWM 3 /* 0x00000008 */
-#define RES4325B0_CLDO_PU 4 /* 0x00000010 */
-
-/* 4325 C1 resources */
-#define RES4325C1_LNLDO2_PU 12 /* 0x00001000 */
-
-#define RES4329_RESERVED0 0 /* 0x00000001 */
-#define RES4329_CBUCK_LPOM 1 /* 0x00000002 */
-#define RES4329_CBUCK_BURST 2 /* 0x00000004 */
-#define RES4329_CBUCK_PWM 3 /* 0x00000008 */
-#define RES4329_CLDO_PU 4 /* 0x00000010 */
-#define RES4329_PALDO_PU 5 /* 0x00000020 */
-#define RES4329_ILP_REQUEST 6 /* 0x00000040 */
-#define RES4329_RESERVED7 7 /* 0x00000080 */
-#define RES4329_RESERVED8 8 /* 0x00000100 */
-#define RES4329_LNLDO1_PU 9 /* 0x00000200 */
-#define RES4329_OTP_PU 10 /* 0x00000400 */
-#define RES4329_RESERVED11 11 /* 0x00000800 */
-#define RES4329_LNLDO2_PU 12 /* 0x00001000 */
-#define RES4329_XTAL_PU 13 /* 0x00002000 */
-#define RES4329_ALP_AVAIL 14 /* 0x00004000 */
-#define RES4329_RX_PWRSW_PU 15 /* 0x00008000 */
-#define RES4329_TX_PWRSW_PU 16 /* 0x00010000 */
-#define RES4329_RFPLL_PWRSW_PU 17 /* 0x00020000 */
-#define RES4329_LOGEN_PWRSW_PU 18 /* 0x00040000 */
-#define RES4329_AFE_PWRSW_PU 19 /* 0x00080000 */
-#define RES4329_BBPLL_PWRSW_PU 20 /* 0x00100000 */
-#define RES4329_HT_AVAIL 21 /* 0x00200000 */
-
-/* 4315 resources */
-#define RES4315_CBUCK_LPOM 1 /* 0x00000002 */
-#define RES4315_CBUCK_BURST 2 /* 0x00000004 */
-#define RES4315_CBUCK_PWM 3 /* 0x00000008 */
-#define RES4315_CLDO_PU 4 /* 0x00000010 */
-#define RES4315_PALDO_PU 5 /* 0x00000020 */
-#define RES4315_ILP_REQUEST 6 /* 0x00000040 */
-#define RES4315_LNLDO1_PU 9 /* 0x00000200 */
-#define RES4315_OTP_PU 10 /* 0x00000400 */
-#define RES4315_LNLDO2_PU 12 /* 0x00001000 */
-#define RES4315_XTAL_PU 13 /* 0x00002000 */
-#define RES4315_ALP_AVAIL 14 /* 0x00004000 */
-#define RES4315_RX_PWRSW_PU 15 /* 0x00008000 */
-#define RES4315_TX_PWRSW_PU 16 /* 0x00010000 */
-#define RES4315_RFPLL_PWRSW_PU 17 /* 0x00020000 */
-#define RES4315_LOGEN_PWRSW_PU 18 /* 0x00040000 */
-#define RES4315_AFE_PWRSW_PU 19 /* 0x00080000 */
-#define RES4315_BBPLL_PWRSW_PU 20 /* 0x00100000 */
-#define RES4315_HT_AVAIL 21 /* 0x00200000 */
-
-/* 4319 resources */
-#define RES4319_CBUCK_LPOM 1 /* 0x00000002 */
-#define RES4319_CBUCK_BURST 2 /* 0x00000004 */
-#define RES4319_CBUCK_PWM 3 /* 0x00000008 */
-#define RES4319_CLDO_PU 4 /* 0x00000010 */
-#define RES4319_PALDO_PU 5 /* 0x00000020 */
-#define RES4319_ILP_REQUEST 6 /* 0x00000040 */
-#define RES4319_LNLDO1_PU 9 /* 0x00000200 */
-#define RES4319_OTP_PU 10 /* 0x00000400 */
-#define RES4319_LNLDO2_PU 12 /* 0x00001000 */
-#define RES4319_XTAL_PU 13 /* 0x00002000 */
-#define RES4319_ALP_AVAIL 14 /* 0x00004000 */
-#define RES4319_RX_PWRSW_PU 15 /* 0x00008000 */
-#define RES4319_TX_PWRSW_PU 16 /* 0x00010000 */
-#define RES4319_RFPLL_PWRSW_PU 17 /* 0x00020000 */
-#define RES4319_LOGEN_PWRSW_PU 18 /* 0x00040000 */
-#define RES4319_AFE_PWRSW_PU 19 /* 0x00080000 */
-#define RES4319_BBPLL_PWRSW_PU 20 /* 0x00100000 */
-#define RES4319_HT_AVAIL 21 /* 0x00200000 */
-
-#define CCTL_4319USB_XTAL_SEL_MASK 0x00180000
-#define CCTL_4319USB_XTAL_SEL_SHIFT 19
-#define CCTL_4319USB_48MHZ_PLL_SEL 1
-#define CCTL_4319USB_24MHZ_PLL_SEL 2
-
-/* PMU resources for 4336 */
-#define RES4336_CBUCK_LPOM 0
-#define RES4336_CBUCK_BURST 1
-#define RES4336_CBUCK_LP_PWM 2
-#define RES4336_CBUCK_PWM 3
-#define RES4336_CLDO_PU 4
-#define RES4336_DIS_INT_RESET_PD 5
-#define RES4336_ILP_REQUEST 6
-#define RES4336_LNLDO_PU 7
-#define RES4336_LDO3P3_PU 8
-#define RES4336_OTP_PU 9
-#define RES4336_XTAL_PU 10
-#define RES4336_ALP_AVAIL 11
-#define RES4336_RADIO_PU 12
-#define RES4336_BG_PU 13
-#define RES4336_VREG1p4_PU_PU 14
-#define RES4336_AFE_PWRSW_PU 15
-#define RES4336_RX_PWRSW_PU 16
-#define RES4336_TX_PWRSW_PU 17
-#define RES4336_BB_PWRSW_PU 18
-#define RES4336_SYNTH_PWRSW_PU 19
-#define RES4336_MISC_PWRSW_PU 20
-#define RES4336_LOGEN_PWRSW_PU 21
-#define RES4336_BBPLL_PWRSW_PU 22
-#define RES4336_MACPHY_CLKAVAIL 23
-#define RES4336_HT_AVAIL 24
-#define RES4336_RSVD 25
-
-/* 4330 resources */
-#define RES4330_CBUCK_LPOM 0
-#define RES4330_CBUCK_BURST 1
-#define RES4330_CBUCK_LP_PWM 2
-#define RES4330_CBUCK_PWM 3
-#define RES4330_CLDO_PU 4
-#define RES4330_DIS_INT_RESET_PD 5
-#define RES4330_ILP_REQUEST 6
-#define RES4330_LNLDO_PU 7
-#define RES4330_LDO3P3_PU 8
-#define RES4330_OTP_PU 9
-#define RES4330_XTAL_PU 10
-#define RES4330_ALP_AVAIL 11
-#define RES4330_RADIO_PU 12
-#define RES4330_BG_PU 13
-#define RES4330_VREG1p4_PU_PU 14
-#define RES4330_AFE_PWRSW_PU 15
-#define RES4330_RX_PWRSW_PU 16
-#define RES4330_TX_PWRSW_PU 17
-#define RES4330_BB_PWRSW_PU 18
-#define RES4330_SYNTH_PWRSW_PU 19
-#define RES4330_MISC_PWRSW_PU 20
-#define RES4330_LOGEN_PWRSW_PU 21
-#define RES4330_BBPLL_PWRSW_PU 22
-#define RES4330_MACPHY_CLKAVAIL 23
-#define RES4330_HT_AVAIL 24
-#define RES4330_5gRX_PWRSW_PU 25
-#define RES4330_5gTX_PWRSW_PU 26
-#define RES4330_5g_LOGEN_PWRSW_PU 27
-
/* 4313 resources */
#define RES4313_BB_PU_RSRC 0
#define RES4313_ILP_REQ_RSRC 1
@@ -593,9 +105,6 @@
#define RES4313_HT_AVAIL_RSRC 14
#define RES4313_MACPHY_CLK_AVAIL_RSRC 15
-/* PMU resource up transition time in ILP cycles */
-#define PMURES_UP_TRANSITION 2
-
/* Determine min/max rsrc masks. Value 0 leaves hardware at default. */
static void si_pmu_res_masks(struct si_pub *sih, u32 * pmin, u32 * pmax)
{
--
1.7.1
next prev parent reply other threads:[~2011-06-29 23:48 UTC|newest]
Thread overview: 142+ messages / expand[flat|nested] mbox.gz Atom feed top
2011-06-29 23:46 [PATCH 000/119] staging: brcm80211: more code cleanup and bug fixed Franky Lin
2011-06-29 23:46 ` [PATCH 001/119] staging: brcm80211: fix checkpatch errors in types.h Franky Lin
2011-06-29 23:46 ` [PATCH 002/119] staging:brcm80211:brcmfmac: CONNECTING status bit is set at appropriate location Franky Lin
2011-06-29 23:46 ` [PATCH 003/119] staging: brcm80211: remove flash related code from initvars_srom_pci() Franky Lin
2011-06-29 23:46 ` [PATCH 004/119] staging: brcm80211: minor cleanup in initvars_srom_pci() Franky Lin
2011-06-29 23:46 ` [PATCH 005/119] staging: brcm80211: make use of linux error codes in srom.c Franky Lin
2011-06-29 23:46 ` [PATCH 006/119] staging: brcm80211: remove unused sdtxlock from fullmac Franky Lin
2011-06-29 23:46 ` [PATCH 007/119] staging: brcm80211: remove empty sdrxqlock " Franky Lin
2011-06-29 23:46 ` [PATCH 008/119] staging: brcm80211: move sdtxqlock codes to dhd_sdio.c Franky Lin
2011-06-29 23:46 ` [PATCH 009/119] staging: brcm80211: remove unused files from fullmac Franky Lin
2011-06-29 23:46 ` [PATCH 010/119] staging: brcm80211: remove code for unsupported chipsets from brcmsmac Franky Lin
2011-06-29 23:46 ` [PATCH 011/119] staging: brcm80211: remove unsupported chipset code from brcmsmac phy Franky Lin
2011-06-29 23:46 ` [PATCH 012/119] staging: brcm80211: remove otp power control functions Franky Lin
2011-06-29 23:46 ` [PATCH 013/119] staging: brcm80211: remove code from pmu.c related to unsupported chipsets Franky Lin
2011-06-29 23:46 ` Franky Lin [this message]
2011-06-29 23:46 ` [PATCH 015/119] staging: brcm80211: remove chip simulation specific code Franky Lin
2011-06-29 23:46 ` [PATCH 016/119] staging: brcm80211: remove macro FOREACH_AS_STA Franky Lin
2011-06-29 23:46 ` [PATCH 017/119] staging: brcm80211: change FOREACH_BSS macro to remove checkpatch error Franky Lin
2011-06-30 8:37 ` Dan Carpenter
2011-06-30 10:19 ` Arend van Spriel
2011-07-05 14:11 ` Arend van Spriel
2011-07-05 16:59 ` Greg KH
2011-06-29 23:46 ` [PATCH 018/119] staging: brcm80211: remove macro definition DRV_MODULE_NAME Franky Lin
2011-06-29 23:46 ` [PATCH 019/119] staging: brcm80211: get rid on IS_CFG80211_FAVORITE macro Franky Lin
2011-06-29 23:46 ` [PATCH 020/119] staging: brcm80211: move assert function to dhd_linux.c Franky Lin
2011-06-29 23:46 ` [PATCH 021/119] staging: brcm80211: parsed ADDBA response ack window parameter Franky Lin
2011-06-29 23:46 ` [PATCH 022/119] staging: brcm80211: taking max AMPDU length advertized by peer into account Franky Lin
2011-06-29 23:46 ` [PATCH 023/119] staging: brcm80211: corrected tx status feedback for non AMPDU packets Franky Lin
2011-06-29 23:46 ` [PATCH 024/119] staging: brcm80211: Changed comments Franky Lin
2011-06-29 23:46 ` [PATCH 025/119] staging: brcm80211: removed unneeded 'if' statement Franky Lin
2011-06-29 23:46 ` [PATCH 026/119] staging: brcm80211: delete empty brcmfmac/README file Franky Lin
2011-06-29 23:46 ` [PATCH 027/119] staging: brcm80211: run scripts/cleanfile to remove whitespace errors Franky Lin
2011-06-29 23:46 ` [PATCH 028/119] staging: brcm80211: cleanup " Franky Lin
2011-06-29 23:46 ` [PATCH 029/119] staging: brcm80211: add missing KERN_ facility level to printk() Franky Lin
2011-06-29 23:46 ` [PATCH 030/119] staging: brcm80211: flatten wlc_phy_shared_detach() Franky Lin
2011-06-29 23:46 ` [PATCH 031/119] staging: brcm80211: remove unnecessary null check Franky Lin
2011-06-29 23:46 ` [PATCH 032/119] staging: brcm80211: reorg brcms_c_validboardtype for clarity Franky Lin
2011-06-29 23:46 ` [PATCH 033/119] staging: brcm80211: correct bcmsdh_recv_buf() calls Franky Lin
2011-06-29 23:46 ` [PATCH 034/119] staging: brcm80211: remove wireless extensions support from brcmfmac Franky Lin
2011-06-29 23:46 ` [PATCH 035/119] staging: brcm80211: replaced prefix of SDIO related functions Franky Lin
2011-06-29 23:47 ` [PATCH 036/119] staging: brcm80211: remove dhd_set_timer function prototype Franky Lin
2011-06-29 23:47 ` [PATCH 037/119] staging: brcm80211: remove unused globals from dhd_common.c Franky Lin
2011-06-29 23:47 ` [PATCH 038/119] staging: brcm80211: remove extern function prototypes from c files Franky Lin
2011-06-29 23:47 ` [PATCH 039/119] staging: brcm80211: rename functions and variables in dhd_common.c Franky Lin
2011-06-29 23:47 ` [PATCH 040/119] staging: brcm80211: rename ioctl command codes in dhd.h Franky Lin
2011-06-29 23:47 ` [PATCH 041/119] staging: brcm80211: remove unused definitions from dhd.h Franky Lin
2011-06-29 23:47 ` [PATCH 042/119] staging: brcm80211: replace macro BCM_MSG_IFNAME_MAX with IFNAMSIZ Franky Lin
2011-06-29 23:47 ` [PATCH 043/119] staging: brcm80211: rename event handling definition Franky Lin
2011-06-29 23:47 ` [PATCH 044/119] staging: brcm80211: rename module parameters Franky Lin
2011-06-29 23:47 ` [PATCH 045/119] staging: brcm80211: remove unnecessary abstraction for scheduler Franky Lin
2011-06-29 23:47 ` [PATCH 046/119] staging: brcm80211: rename fullmac functions Franky Lin
2011-06-29 23:47 ` [PATCH 047/119] staging: brcm80211: remove unused prototypes from dhd.h Franky Lin
2011-06-29 23:47 ` [PATCH 048/119] staging: brcm80211: removed BDC defines Franky Lin
2011-06-29 23:47 ` [PATCH 049/119] staging: brcm80211: rename fullmac protocol related functions Franky Lin
2011-06-29 23:47 ` [PATCH 050/119] staging: brcm80211: get rid of PKT[TO/FROM]NATIVE macros Franky Lin
2011-06-29 23:47 ` [PATCH 051/119] staging: brcm80211: rename dhd_prot and get rid of dhd_prot_t typedef Franky Lin
2011-06-29 23:47 ` [PATCH 052/119] staging: brcm80211: remove conditional SIMPLE_ISCAN code Franky Lin
2011-06-29 23:47 ` [PATCH 053/119] staging: brcm80211: rename netdevice related functions in fullmac Franky Lin
2011-06-29 23:47 ` [PATCH 054/119] staging: brcm80211: rename static functions in dhd_linux.c Franky Lin
2011-06-29 23:47 ` [PATCH 055/119] staging: brcm80211: rename more brcmfmac module parameters Franky Lin
2011-06-29 23:47 ` [PATCH 056/119] staging: brcm80211: replaced typedef sdioh_info_t by struct sdioh_info Franky Lin
2011-06-29 23:47 ` [PATCH 057/119] staging: brcm80211: replaced typedef bcmsdh_info_t by struct brcmf_sdio Franky Lin
2011-06-29 23:47 ` [PATCH 058/119] staging: brcm80211: replaced typedef by struct for several sdio types Franky Lin
2011-06-29 23:47 ` [PATCH 059/119] staging: brcm80211: replaced typedef SDIOH_API_RC by int Franky Lin
2011-06-29 23:47 ` [PATCH 060/119] staging: brcm80211: replaced more sdio related typedefs by structs Franky Lin
2011-06-29 23:47 ` [PATCH 061/119] staging: brcm80211: further renaming in fullmac sources Franky Lin
2011-07-05 7:36 ` Dan Carpenter
2011-07-05 14:15 ` Roland Vossen
2011-07-05 17:38 ` Dan Carpenter
2011-06-29 23:47 ` [PATCH 062/119] staging: brcm80211: remove ARP_OFFLOAD_SUPPORT macro definition Franky Lin
2011-06-29 23:47 ` [PATCH 063/119] staging: brcm80211: remove PKT_FILTER_SUPPORT " Franky Lin
2011-06-29 23:47 ` [PATCH 064/119] staging: brcm80211: remove BCMLXSDMMC " Franky Lin
2011-06-29 23:47 ` [PATCH 065/119] staging: brcm80211: always enable code for PLATFORM_BUS functionality Franky Lin
2011-06-29 23:47 ` [PATCH 066/119] staging: brcm80211: remove DHD_SCHED macro definition Franky Lin
2011-06-29 23:47 ` [PATCH 067/119] staging: brcm80211: remove EMBEDDED_PLATFORM " Franky Lin
2011-06-29 23:47 ` [PATCH 068/119] staging: brcm80211: remove MMC_SDIO_ABORT " Franky Lin
2011-06-29 23:47 ` [PATCH 069/119] staging: brcm80211: remove TOE " Franky Lin
2011-06-29 23:47 ` [PATCH 070/119] staging: brcm80211: define SHOW_EVENTS macro only for debugging Franky Lin
2011-06-29 23:47 ` [PATCH 071/119] staging: brcm80211: replace DHD_DEBUG macro with BCMDBG Franky Lin
2011-06-29 23:47 ` [PATCH 072/119] staging: brcm80211: remove unnecessary macro defintions Franky Lin
2011-06-29 23:47 ` [PATCH 073/119] staging: brcm80211: remove custom gpio support code Franky Lin
2011-06-29 23:47 ` [PATCH 074/119] staging: brcm80211: remove conditional code fragments from brcmfmac Franky Lin
2011-06-29 23:47 ` [PATCH 075/119] staging: brcm80211: rename EPI_VERSION_STR macro Franky Lin
2011-06-29 23:47 ` [PATCH 076/119] staging: brcm80211: use linux native ethertype iso ETH_P_BRCM Franky Lin
2011-06-29 23:47 ` [PATCH 077/119] staging: brcm80211: move sdio related suspend/resume code to bus interface layer Franky Lin
2011-06-29 23:47 ` [PATCH 078/119] staging: brcm80211: move waitqueue code to dhd_sdio.c Franky Lin
2011-06-29 23:47 ` [PATCH 079/119] staging: brcm80211: move fullmac watchdog timer " Franky Lin
2011-06-29 23:47 ` [PATCH 080/119] staging: brcm80211: move debug console related " Franky Lin
2011-06-29 23:47 ` [PATCH 081/119] staging: brcm80211: move dpc " Franky Lin
2011-06-29 23:47 ` [PATCH 082/119] staging: brcm80211: move sdio resource lock " Franky Lin
2011-06-29 23:47 ` [PATCH 083/119] staging: brcm80211: clean up firmware download code in fullmac Franky Lin
2011-06-29 23:47 ` [PATCH 084/119] staging: brcm80211: rename function variables Franky Lin
2011-06-29 23:47 ` [PATCH 085/119] staging: brcm80211: remove unused definitions from dhd.h Franky Lin
2011-06-29 23:47 ` [PATCH 086/119] staging: brcm80211: rename structure definitions in dhd.h Franky Lin
2011-06-29 23:47 ` [PATCH 087/119] staging: brcm80211: rename macro " Franky Lin
2011-06-29 23:47 ` [PATCH 088/119] staging: brcm80211: remove unused macro definitions from dhd.h Franky Lin
2011-06-29 23:47 ` [PATCH 089/119] staging: brcm80211: structure renaming in dhd.h Franky Lin
2011-06-29 23:47 ` [PATCH 090/119] staging: brcm80211: rename structure definitions in dhd_linux.c Franky Lin
2011-06-29 23:47 ` [PATCH 091/119] staging: brcm80211: rename struct dhd_pub to struct brcmf_pub Franky Lin
2011-06-29 23:47 ` [PATCH 092/119] staging: brmc80211: cleaned up sdio related error codes Franky Lin
2011-06-29 23:47 ` [PATCH 093/119] staging: brcm80211: removed global function declarations from .c files Franky Lin
2011-06-29 23:47 ` [PATCH 094/119] staging: brcm80211: removed last occurrences of bcmsdh/BCMSDH Franky Lin
2011-07-05 9:59 ` Dan Carpenter
2011-07-05 12:31 ` Arend van Spriel
2011-06-29 23:47 ` [PATCH 095/119] staging: brcm80211: sdh related code cleanup Franky Lin
2011-06-29 23:48 ` [PATCH 096/119] staging: brcm80211: removed brcmf_sdioh_interrupt_pending() Franky Lin
2011-06-29 23:48 ` [PATCH 097/119] staging: brcm80211: removed brcmf_sdioh_reset() Franky Lin
2011-06-29 23:48 ` [PATCH 098/119] staging: brcm80211: removed brcmf_sdioh_start() and brcmf_sdioh_stop() Franky Lin
2011-06-29 23:48 ` [PATCH 099/119] staging: brcm80211: removed file sdiovar.h Franky Lin
2011-06-29 23:48 ` [PATCH 100/119] staging: brcm80211: further cleaned fullmac header files Franky Lin
2011-06-29 23:48 ` [PATCH 101/119] staging: brcm80211: removed last global function declaration in .c file Franky Lin
2011-06-29 23:48 ` [PATCH 102/119] staging: brcm80211: rename function variables Franky Lin
2011-06-29 23:48 ` [PATCH 103/119] staging: brcm80211: remove unused macros from dhd_dbg.h Franky Lin
2011-06-29 23:48 ` [PATCH 104/119] staging: brcm80211: rename dhd_bus structure and functions Franky Lin
2011-06-29 23:48 ` [PATCH 105/119] staging: brcm80211: rename static functions in wl_cfg80211.c Franky Lin
2011-06-29 23:48 ` [PATCH 106/119] staging: brcm80211: removed last typedefs from fullmac Franky Lin
2011-06-29 23:48 ` [PATCH 107/119] staging: brcm80211: removed unused code and definitions " Franky Lin
2011-06-29 23:48 ` [PATCH 108/119] staging: brcm80211: fullmac register access macro's take u32 instead of pointers Franky Lin
2011-06-29 23:48 ` [PATCH 109/119] staging: brcm80211: replaced macro R_SDREG by function r_sdreg() Franky Lin
2011-06-29 23:48 ` [PATCH 110/119] staging: brcm80211: replaced macro W_SDREG by function w_sdreg() Franky Lin
2011-06-29 23:48 ` [PATCH 111/119] staging: brcm80211: got rid of redundant member 'regs' of struct dhd_bus Franky Lin
2011-06-29 23:48 ` [PATCH 112/119] staging: brcm80211: removed last amd64 compiler warnings Franky Lin
2011-06-29 23:48 ` [PATCH 113/119] staging: brcm80211: W_REG macro cleanup in fullmac SDIO Franky Lin
2011-06-29 23:48 ` [PATCH 114/119] staging: brcm80211: removed unused definitions from dhd_sdio.c Franky Lin
2011-06-29 23:48 ` [PATCH 115/119] staging: brcm80211: rename structures and variables in wl_cfg80211.c Franky Lin
2011-06-29 23:48 ` [PATCH 116/119] staging: brcm80211: rename pointer conversion macros in wl_cfg80211.h Franky Lin
2011-06-29 23:48 ` [PATCH 117/119] staging: brcm80211: rename external function in wl_cfg80211.c Franky Lin
2011-06-29 23:48 ` [PATCH 118/119] staging: brcm80211: fix for reported log spam problem Franky Lin
2011-06-29 23:48 ` [PATCH 119/119] staging: brcm80211: updated TODO file Franky Lin
2011-06-30 6:29 ` [PATCH 000/119] staging: brcm80211: more code cleanup and bug fixed Rafał Miłecki
2011-06-30 6:59 ` Arend van Spriel
2011-06-30 17:42 ` Henry Ptasinski
2011-06-30 18:32 ` Dan Carpenter
2011-06-30 21:40 ` Henry Ptasinski
2011-07-01 0:05 ` Dan Carpenter
2011-07-01 0:14 ` Greg KH
2011-06-30 20:16 ` Luciano Coelho
2011-06-30 21:22 ` Henry Ptasinski
2011-07-05 16:59 ` Greg KH
2011-07-05 19:15 ` Arend van Spriel
2011-07-05 19:46 ` Arend van Spriel
2011-07-06 1:58 ` Greg KH
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1309391303-22741-15-git-send-email-frankyl@broadcom.com \
--to=frankyl@broadcom.com \
--cc=devel@linuxdriverproject.org \
--cc=gregkh@suse.de \
--cc=linux-wireless@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.