From mboxrd@z Thu Jan 1 00:00:00 1970 From: Tero Kristo Subject: [PATCHv6 01/11] omap: prcm: switch to a chained IRQ handler mechanism Date: Mon, 25 Jul 2011 19:36:01 +0300 Message-ID: <1311611771-15093-2-git-send-email-t-kristo@ti.com> References: <1311611771-15093-1-git-send-email-t-kristo@ti.com> Mime-Version: 1.0 Content-Type: text/plain; charset="UTF-8" Content-Transfer-Encoding: 8BIT Return-path: Received: from arroyo.ext.ti.com ([192.94.94.40]:55964 "EHLO arroyo.ext.ti.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1752469Ab1GYQgg convert rfc822-to-8bit (ORCPT ); Mon, 25 Jul 2011 12:36:36 -0400 Content-Class: urn:content-classes:message In-Reply-To: <1311611771-15093-1-git-send-email-t-kristo@ti.com> Sender: linux-omap-owner@vger.kernel.org List-Id: linux-omap@vger.kernel.org To: linux-omap@vger.kernel.org Cc: Thomas Petazzoni , "Avinash.H.M" , Kevin Hilman , "Cousson, Benoit" , Tony Lindgren , "Govindraj.R" , Felipe Balbi , Paul Walmsley Introduce a chained interrupt handler mechanism for the PRCM interrupt, so that individual PRCM event can cleanly be handled by handlers in separate drivers. We do this by introducing PRCM event names, which are then matched to the particular PRCM interrupt bit depending on the specific OMAP SoC being used. arch/arm/mach-omap2/prcm.c implements the chained interrupt mechanism itself, with SoC specific support / init structure defined in arch/arm/mach-omap2/prm2xxx_3xxx.c and arch/arm/mach-omap2/prm4xxx.c respectively. At initialization time, the set of PRCM events is filtered against the SoC on which we are running, keeping only the ones that are actually useful. All the logic is written to be generic with regard to OMAP3/OMAP4, even though OMAP3 has single PRCM event registers and OMAP4 has two PRCM event registers. Patch tested on OMAP3 beagleboard. Signed-off-by: Tero Kristo Cc: Thomas Petazzoni Cc: Avinash.H.M Cc: Kevin Hilman Cc: Cousson, Benoit Cc: Tony Lindgren Cc: Govindraj.R Cc: Felipe Balbi Cc: Paul Walmsley --- arch/arm/mach-omap2/pm34xx.c | 106 ++++++----------- arch/arm/mach-omap2/prcm.c | 205 ++++++++++++++++++++++++++++++++ arch/arm/mach-omap2/prm2xxx_3xxx.c | 18 +++ arch/arm/mach-omap2/prm2xxx_3xxx.h | 4 + arch/arm/mach-omap2/prm44xx.c | 29 +++++ arch/arm/mach-omap2/prm44xx.h | 2 + arch/arm/plat-omap/include/plat/prcm.h | 15 +++ 7 files changed, 309 insertions(+), 70 deletions(-) diff --git a/arch/arm/mach-omap2/pm34xx.c b/arch/arm/mach-omap2/pm34xx.c index 7255d9b..7805a07 100644 --- a/arch/arm/mach-omap2/pm34xx.c +++ b/arch/arm/mach-omap2/pm34xx.c @@ -64,6 +64,9 @@ static inline bool is_suspending(void) } #endif +static int prcm_io_irq; +static int prcm_wkup_irq; + /* pm34xx errata defined in pm.h */ u16 pm34xx_errata; @@ -234,7 +237,7 @@ static int prcm_clear_mod_irqs(s16 module, u8 regs) return c; } -static int _prcm_int_handle_wakeup(void) +static irqreturn_t _prcm_int_handle_wakeup(int irq, void *unused) { int c; @@ -246,64 +249,7 @@ static int _prcm_int_handle_wakeup(void) c += prcm_clear_mod_irqs(OMAP3430ES2_USBHOST_MOD, 1); } - return c; -} - -/* - * PRCM Interrupt Handler - * - * The PRM_IRQSTATUS_MPU register indicates if there are any pending - * interrupts from the PRCM for the MPU. These bits must be cleared in - * order to clear the PRCM interrupt. The PRCM interrupt handler is - * implemented to simply clear the PRM_IRQSTATUS_MPU in order to clear - * the PRCM interrupt. Please note that bit 0 of the PRM_IRQSTATUS_MPU - * register indicates that a wake-up event is pending for the MPU and - * this bit can only be cleared if the all the wake-up events latched - * in the various PM_WKST_x registers have been cleared. The interrupt - * handler is implemented using a do-while loop so that if a wake-up - * event occurred during the processing of the prcm interrupt handler - * (setting a bit in the corresponding PM_WKST_x register and thus - * preventing us from clearing bit 0 of the PRM_IRQSTATUS_MPU register) - * this would be handled. - */ -static irqreturn_t prcm_interrupt_handler (int irq, void *dev_id) -{ - u32 irqenable_mpu, irqstatus_mpu; - int c = 0; - - irqenable_mpu = omap2_prm_read_mod_reg(OCP_MOD, - OMAP3_PRM_IRQENABLE_MPU_OFFSET); - irqstatus_mpu = omap2_prm_read_mod_reg(OCP_MOD, - OMAP3_PRM_IRQSTATUS_MPU_OFFSET); - irqstatus_mpu &= irqenable_mpu; - - do { - if (irqstatus_mpu & (OMAP3430_WKUP_ST_MASK | - OMAP3430_IO_ST_MASK)) { - c = _prcm_int_handle_wakeup(); - - /* - * Is the MPU PRCM interrupt handler racing with the - * IVA2 PRCM interrupt handler ? - */ - WARN(c == 0, "prcm: WARNING: PRCM indicated MPU wakeup " - "but no wakeup sources are marked\n"); - } else { - /* XXX we need to expand our PRCM interrupt handler */ - WARN(1, "prcm: WARNING: PRCM interrupt received, but " - "no code to handle it (%08x)\n", irqstatus_mpu); - } - - omap2_prm_write_mod_reg(irqstatus_mpu, OCP_MOD, - OMAP3_PRM_IRQSTATUS_MPU_OFFSET); - - irqstatus_mpu = omap2_prm_read_mod_reg(OCP_MOD, - OMAP3_PRM_IRQSTATUS_MPU_OFFSET); - irqstatus_mpu &= irqenable_mpu; - - } while (irqstatus_mpu); - - return IRQ_HANDLED; + return c ? IRQ_HANDLED : IRQ_NONE; } static void omap34xx_save_context(u32 *save) @@ -875,20 +821,35 @@ static int __init omap3_pm_init(void) /* XXX prcm_setup_regs needs to be before enabling hw * supervised mode for powerdomains */ prcm_setup_regs(); + ret = omap3_prcm_irq_init(); + if (ret) { + pr_err("omap_prcm_irq_init() failed with %d\n", ret); + goto err_prcm_irq_init; + } + + prcm_wkup_irq = omap_prcm_event_to_irq("wkup"); + prcm_io_irq = omap_prcm_event_to_irq("io"); + + ret = request_irq(prcm_wkup_irq, _prcm_int_handle_wakeup, + IRQF_NO_SUSPEND, "prcm_wkup", NULL); - ret = request_irq(INT_34XX_PRCM_MPU_IRQ, - (irq_handler_t)prcm_interrupt_handler, - IRQF_DISABLED, "prcm", NULL); if (ret) { - printk(KERN_ERR "request_irq failed to register for 0x%x\n", - INT_34XX_PRCM_MPU_IRQ); - goto err1; + printk(KERN_ERR "Failed to request prcm_wkup irq\n"); + goto err_prcm_wkup; + } + + ret = request_irq(prcm_io_irq, _prcm_int_handle_wakeup, + IRQF_NO_SUSPEND, "prcm_io", NULL); + + if (ret) { + printk(KERN_ERR "Failed to request prcm_io irq\n"); + goto err_prcm_io; } ret = pwrdm_for_each(pwrdms_setup, NULL); if (ret) { printk(KERN_ERR "Failed to setup powerdomains\n"); - goto err2; + goto err_pwrdms_setup; } (void) clkdm_for_each(clkdms_setup, NULL); @@ -896,7 +857,7 @@ static int __init omap3_pm_init(void) mpu_pwrdm = pwrdm_lookup("mpu_pwrdm"); if (mpu_pwrdm == NULL) { printk(KERN_ERR "Failed to get mpu_pwrdm\n"); - goto err2; + goto err_pwrdms_setup; } neon_pwrdm = pwrdm_lookup("neon_pwrdm"); @@ -944,14 +905,19 @@ static int __init omap3_pm_init(void) } omap3_save_scratchpad_contents(); -err1: + return ret; -err2: - free_irq(INT_34XX_PRCM_MPU_IRQ, NULL); + + err_pwrdms_setup: list_for_each_entry_safe(pwrst, tmp, &pwrst_list, node) { list_del(&pwrst->node); kfree(pwrst); } + err_prcm_io: + free_irq(prcm_wkup_irq, NULL); + err_prcm_wkup: + omap_prcm_irq_cleanup(); + err_prcm_irq_init: return ret; } diff --git a/arch/arm/mach-omap2/prcm.c b/arch/arm/mach-omap2/prcm.c index 2e40a5c..83cf8ae 100644 --- a/arch/arm/mach-omap2/prcm.c +++ b/arch/arm/mach-omap2/prcm.c @@ -23,6 +23,8 @@ #include #include #include +#include +#include #include #include @@ -45,6 +47,209 @@ void __iomem *cm2_base; #define MAX_MODULE_ENABLE_WAIT 100000 +/* Maximum number of PRCM interrupt status registers */ +#define OMAP_PRCM_MAX_NR_PENDING_REG 2 + +/* 64 interrupts needed on OMAP4, 32 on OMAP3 */ +#define OMAP_PRCM_NR_IRQS 64 + +/* Setup for the interrupt handling based on used platform */ +static struct omap_prcm_irq_setup *irq_setup; + +static struct irq_chip_generic *prcm_irq_chips[OMAP_PRCM_MAX_NR_PENDING_REG]; + +/* + * Structure describing the interrupt corresponding to each PRCM event + */ +struct omap_prcm_irq { + /* Logical name for the interrupt */ + const char *name; + + /* + * Corresponding offset in the status/enable register. The + * offset can be greater than 32, in which case it spans over + * to the second status register + */ + unsigned int offset; + + /* OMAP chip for which this PRCM event exists */ + const struct omap_chip_id omap_chip; +}; + +#define OMAP_PRCM_IRQ(_name, _offset, _chip) { \ + .name = _name, \ + .offset = _offset, \ + .omap_chip = OMAP_CHIP_INIT(_chip) \ + } + +static struct omap_prcm_irq omap_prcm_irqs[] = { + OMAP_PRCM_IRQ("wkup", 0, + CHIP_IS_OMAP3430 | CHIP_GE_OMAP3630ES1_1), + OMAP_PRCM_IRQ("io", 9, + CHIP_IS_OMAP3430 | CHIP_GE_OMAP3630ES1_1 | + CHIP_IS_OMAP4430), +}; + +/* + * PRCM Interrupt Handler + * + * The PRM_IRQSTATUS_MPU register indicates if there are any pending + * interrupts from the PRCM for the MPU. These bits must be cleared in + * order to clear the PRCM interrupt. The PRCM interrupt handler is + * implemented to simply clear the PRM_IRQSTATUS_MPU in order to clear + * the PRCM interrupt. Please note that bit 0 of the PRM_IRQSTATUS_MPU + * register indicates that a wake-up event is pending for the MPU and + * this bit can only be cleared if the all the wake-up events latched + * in the various PM_WKST_x registers have been cleared. The interrupt + * handler is implemented using a do-while loop so that if a wake-up + * event occurred during the processing of the prcm interrupt handler + * (setting a bit in the corresponding PM_WKST_x register and thus + * preventing us from clearing bit 0 of the PRM_IRQSTATUS_MPU register) + * this would be handled. + */ +static void prcm_irq_handler(unsigned int irq, struct irq_desc *desc) +{ + unsigned long pending[OMAP_PRCM_MAX_NR_PENDING_REG]; + struct irq_chip *chip = irq_desc_get_chip(desc); + + /* + * Loop until all pending irqs are handled, since + * generic_handle_irq() can cause new irqs to come + */ + while (1) { + unsigned int virtirq; + + chip->irq_ack(&desc->irq_data); + + memset(pending, 0, sizeof(pending)); + irq_setup->pending_events(pending); + + /* No bit set, then all IRQs are handled */ + if (find_first_bit(pending, OMAP_PRCM_NR_IRQS) + >= OMAP_PRCM_NR_IRQS) { + chip->irq_unmask(&desc->irq_data); + break; + } + + /* + * Loop on all currently pending irqs so that new irqs + * cannot starve previously pending irqs + */ + for_each_set_bit(virtirq, pending, OMAP_PRCM_NR_IRQS) + generic_handle_irq(irq_setup->base_irq + virtirq); + + chip->irq_unmask(&desc->irq_data); + } +} + +/* + * Given a PRCM event name, returns the corresponding IRQ on which the + * handler should be registered. + */ +int omap_prcm_event_to_irq(const char *name) +{ + int i; + + for (i = 0; i < ARRAY_SIZE(omap_prcm_irqs); i++) + if (!strcmp(omap_prcm_irqs[i].name, name)) + return irq_setup->base_irq + omap_prcm_irqs[i].offset; + + return -ENOENT; +} + +/* + * Reverses memory allocated and other setups done by + * omap_prcm_irq_init(). + */ +void omap_prcm_irq_cleanup(void) +{ + int i; + + for (i = 0; i < OMAP_PRCM_MAX_NR_PENDING_REG; i++) { + if (prcm_irq_chips[i]) + irq_remove_generic_chip(prcm_irq_chips[i], 0xffffffff, + 0, 0); + prcm_irq_chips[i] = NULL; + } + + irq_set_chained_handler(irq_setup->irq, NULL); + + if (irq_setup->base_irq > 0) + irq_free_descs(irq_setup->base_irq, OMAP_PRCM_NR_IRQS); + irq_setup->base_irq = 0; +} + +/* + * Prepare the array of PRCM events corresponding to the current SoC, + * and set-up the chained interrupt handler mechanism. + */ +static int __init omap_prcm_irq_init(void) +{ + int i; + struct irq_chip_generic *gc; + struct irq_chip_type *ct; + u32 mask[2] = { 0, 0 }; + int offset; + int max_irq = 0; + + for (i = 0; i < ARRAY_SIZE(omap_prcm_irqs); i++) + if (omap_chip_is(omap_prcm_irqs[i].omap_chip)) { + offset = omap_prcm_irqs[i].offset; + if (offset < 32) + mask[0] |= 1 << offset; + else + mask[1] |= 1 << (offset - 32); + if (offset > max_irq) + max_irq = offset; + } + + irq_set_chained_handler(irq_setup->irq, prcm_irq_handler); + + irq_setup->base_irq = irq_alloc_descs(-1, 0, OMAP_PRCM_NR_IRQS, 0); + + if (irq_setup->base_irq < 0) { + pr_err("PRCM: failed to allocate irq descs\n"); + goto err; + } + + for (i = 0; i <= max_irq / 32; i++) { + gc = irq_alloc_generic_chip("PRCM", 1, + irq_setup->base_irq + i * 32, NULL, handle_level_irq); + + if (!gc) { + pr_err("PRCM: failed to allocate generic chip\n"); + goto err; + } + ct = gc->chip_types; + ct->chip.irq_ack = irq_gc_ack; + ct->chip.irq_mask = irq_gc_mask_clr_bit; + ct->chip.irq_unmask = irq_gc_mask_set_bit; + + ct->regs.ack = irq_setup->ack + (i << 2); + ct->regs.mask = irq_setup->mask + (i << 2); + + irq_setup_generic_chip(gc, mask[i], 0, IRQ_NOREQUEST, 0); + prcm_irq_chips[i] = gc; + } + return 0; + +err: + omap_prcm_irq_cleanup(); + return -ENOMEM; +} + +int __init omap3_prcm_irq_init(void) +{ + irq_setup = &omap3_prcm_irq_setup; + return omap_prcm_irq_init(); +} + +int __init omap4_prcm_irq_init(void) +{ + irq_setup = &omap4_prcm_irq_setup; + return omap_prcm_irq_init(); +} + u32 omap_prcm_get_reset_sources(void) { /* XXX This presumably needs modification for 34XX */ diff --git a/arch/arm/mach-omap2/prm2xxx_3xxx.c b/arch/arm/mach-omap2/prm2xxx_3xxx.c index 3b83763..3af3313 100644 --- a/arch/arm/mach-omap2/prm2xxx_3xxx.c +++ b/arch/arm/mach-omap2/prm2xxx_3xxx.c @@ -19,6 +19,7 @@ #include #include #include +#include #include "vp.h" @@ -212,3 +213,20 @@ u32 omap3_prm_vcvp_rmw(u32 mask, u32 bits, u8 offset) { return omap2_prm_rmw_mod_reg_bits(mask, bits, OMAP3430_GR_MOD, offset); } + +static void omap3_prm_pending_events(unsigned long *events) +{ + u32 irqenable_mpu = + omap2_prm_read_mod_reg(OCP_MOD, OMAP3_PRM_IRQENABLE_MPU_OFFSET); + u32 irqstatus_mpu = + omap2_prm_read_mod_reg(OCP_MOD, OMAP3_PRM_IRQSTATUS_MPU_OFFSET); + + events[0] = irqenable_mpu & irqstatus_mpu; +} + +struct omap_prcm_irq_setup omap3_prcm_irq_setup = { + .ack = (u32)OMAP3430_PRM_IRQSTATUS_MPU, + .mask = (u32)OMAP3430_PRM_IRQENABLE_MPU, + .pending_events = omap3_prm_pending_events, + .irq = INT_34XX_PRCM_MPU_IRQ, +}; diff --git a/arch/arm/mach-omap2/prm2xxx_3xxx.h b/arch/arm/mach-omap2/prm2xxx_3xxx.h index cef533d..8bf8af7 100644 --- a/arch/arm/mach-omap2/prm2xxx_3xxx.h +++ b/arch/arm/mach-omap2/prm2xxx_3xxx.h @@ -314,6 +314,10 @@ void omap3_prm_vp_clear_txdone(u8 vp_id); extern u32 omap3_prm_vcvp_read(u8 offset); extern void omap3_prm_vcvp_write(u32 val, u8 offset); extern u32 omap3_prm_vcvp_rmw(u32 mask, u32 bits, u8 offset); + +/* PRCM irq setup struct, used by common PRCM irq routines */ +extern struct omap_prcm_irq_setup omap3_prcm_irq_setup; + #endif /* CONFIG_ARCH_OMAP4 */ #endif diff --git a/arch/arm/mach-omap2/prm44xx.c b/arch/arm/mach-omap2/prm44xx.c index 495a31a..2beeb40 100644 --- a/arch/arm/mach-omap2/prm44xx.c +++ b/arch/arm/mach-omap2/prm44xx.c @@ -20,6 +20,7 @@ #include #include #include +#include #include "vp.h" #include "prm44xx.h" @@ -121,3 +122,31 @@ u32 omap4_prm_vcvp_rmw(u32 mask, u32 bits, u8 offset) OMAP4430_PRM_DEVICE_INST, offset); } + +static void omap4_prm_pending_events(unsigned long *events) +{ + u32 irqenable_mpu, irqstatus_mpu; + int i; + + /* OMAP4 has two enable/status registers for the PRCM */ + for (i = 0; i < 2; i++) { + irqenable_mpu = + omap4_prm_read_inst_reg(OMAP4430_PRM_OCP_SOCKET_INST, + OMAP4_PRM_IRQENABLE_MPU_OFFSET + + i * 4); + irqstatus_mpu = + omap4_prm_read_inst_reg(OMAP4430_PRM_OCP_SOCKET_INST, + OMAP4_PRM_IRQSTATUS_MPU_OFFSET + + i * 4); + events[i] = irqenable_mpu & irqstatus_mpu; + } +} + +struct omap_prcm_irq_setup omap4_prcm_irq_setup = { + .ack = (u32)OMAP44XX_PRM_REGADDR(OMAP4430_PRM_OCP_SOCKET_INST, + OMAP4_PRM_IRQSTATUS_MPU_OFFSET), + .mask = (u32)OMAP44XX_PRM_REGADDR(OMAP4430_PRM_OCP_SOCKET_INST, + OMAP4_PRM_IRQENABLE_MPU_OFFSET), + .pending_events = omap4_prm_pending_events, + .irq = OMAP44XX_IRQ_PRCM, +}; diff --git a/arch/arm/mach-omap2/prm44xx.h b/arch/arm/mach-omap2/prm44xx.h index 3d66ccd..0c71933 100644 --- a/arch/arm/mach-omap2/prm44xx.h +++ b/arch/arm/mach-omap2/prm44xx.h @@ -765,4 +765,6 @@ extern u32 omap4_prm_vcvp_rmw(u32 mask, u32 bits, u8 offset); # endif +extern struct omap_prcm_irq_setup omap4_prcm_irq_setup; + #endif diff --git a/arch/arm/plat-omap/include/plat/prcm.h b/arch/arm/plat-omap/include/plat/prcm.h index 267f43b..798c175 100644 --- a/arch/arm/plat-omap/include/plat/prcm.h +++ b/arch/arm/plat-omap/include/plat/prcm.h @@ -27,6 +27,21 @@ #ifndef __ASM_ARM_ARCH_OMAP_PRCM_H #define __ASM_ARM_ARCH_OMAP_PRCM_H +#include + +/* Setup for the PRCM interrupt handler */ +struct omap_prcm_irq_setup { + void (*pending_events)(unsigned long *); + u32 ack; + u32 mask; + int irq; + int base_irq; +}; + +int omap_prcm_event_to_irq(const char *name); +int omap3_prcm_irq_init(void); +int omap4_prcm_irq_init(void); +void omap_prcm_irq_cleanup(void); u32 omap_prcm_get_reset_sources(void); int omap2_cm_wait_idlest(void __iomem *reg, u32 mask, u8 idlest, const char *name); -- 1.7.4.1 Texas Instruments Oy, Tekniikantie 12, 02150 Espoo. Y-tunnus: 0115040-6. Kotipaikka: Helsinki