From mboxrd@z Thu Jan 1 00:00:00 1970 From: Simon Schwarz Date: Thu, 28 Jul 2011 10:38:08 +0200 Subject: [U-Boot] [PATCH V6 2/5] omap-common: add nand spl support In-Reply-To: <1311842291-24837-1-git-send-email-simonschwarzcor@gmail.com> References: <1311771039-31691-1-git-send-email-simonschwarzcor@gmail.com> <1311842291-24837-1-git-send-email-simonschwarzcor@gmail.com> Message-ID: <1311842291-24837-3-git-send-email-simonschwarzcor@gmail.com> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de Add NAND support for the new SPL structure. Signed-off-by: Simon Schwarz --- This patch didn't exist before V2! V2 changes: ADD Some define-barriers for OMAP3 to only use NAND ADD nand_load_image() - inits the OMAP gpmc, loads the images - parses the header CHG cosmetic ADD do_reset() implementation for omap-common spl ADD nand_copy_image to nand.h ADD CPP barriers for mmc and nand support. The parts depending on library support are only compiled if the respective library is included. V3 changes: ADD Comment why setup_clocks_for_console() isn't called for OMAP3 CHG cosmetic (deleted empty line) CHG rename of NAND_MODE_HW to NAND_MODE_HW_ECC DEL NAND_MODE_SW. Not used. V4 changes: CHG cosmetic - style problems V5 changes: CHG renamed nand_copy_image to nand_spl_load_image CHG offs paramter of nand_spl_load_image is of type loff_t now V6 changes: ADD call to nand_deselect after loading the images ADD nand_deselect to nand.h Transition from V1 to V2 also includes that this patch is now based on - the new SPL layout by Aneesh V and Daniel Schwierzeck - the OMAP4 SPL patches by Aneesh V --- arch/arm/cpu/armv7/omap-common/spl.c | 47 ++++++++++++++++++++++++++++++++++ arch/arm/include/asm/omap_common.h | 1 + include/nand.h | 3 ++ 3 files changed, 51 insertions(+), 0 deletions(-) diff --git a/arch/arm/cpu/armv7/omap-common/spl.c b/arch/arm/cpu/armv7/omap-common/spl.c index d177652..7ec5c7c 100644 --- a/arch/arm/cpu/armv7/omap-common/spl.c +++ b/arch/arm/cpu/armv7/omap-common/spl.c @@ -26,6 +26,7 @@ #include #include #include +#include #include #include #include @@ -107,6 +108,7 @@ static void parse_image_header(const struct image_header *header) } } +#ifdef CONFIG_SPL_MMC_SUPPORT static void mmc_load_image_raw(struct mmc *mmc) { u32 image_size_sectors, err; @@ -140,7 +142,9 @@ end: hang(); } } +#endif /* CONFIG_SPL_MMC_SUPPORT */ +#ifdef CONFIG_SPL_MMC_SUPPORT static void mmc_load_image_fat(struct mmc *mmc) { s32 err; @@ -173,7 +177,9 @@ end: hang(); } } +#endif /* CONFIG_SPL_MMC_SUPPORT */ +#ifdef CONFIG_SPL_MMC_SUPPORT static void mmc_load_image(void) { struct mmc *mmc; @@ -206,6 +212,28 @@ static void mmc_load_image(void) hang(); } } +#endif /* CONFIG_SPL_MMC_SUPPORT */ + +#ifdef CONFIG_SPL_NAND_SUPPORT +static void nand_load_image(void) +{ + gpmc_init(); + nand_init(); + nand_spl_load_image(CONFIG_SYS_NAND_U_BOOT_OFFS, + CONFIG_SYS_NAND_U_BOOT_SIZE, + (uchar *)CONFIG_SYS_NAND_U_BOOT_DST); +#ifdef CONFIG_NAND_ENV_DST + nand_spl_load_image(CONFIG_ENV_OFFSET, CONFIG_ENV_SIZE, + (uchar *)CONFIG_NAND_ENV_DST); +#ifdef CONFIG_ENV_OFFSET_REDUND + nand_spl_load_image(CONFIG_ENV_OFFSET_REDUND, CONFIG_ENV_SIZE, + (uchar *)CONFIG_NAND_ENV_DST + CONFIG_ENV_SIZE); +#endif +#endif + nand_deselect(); + parse_image_header((struct image_header *)CONFIG_SYS_NAND_U_BOOT_DST); +} +#endif /* CONFIG_SPL_NAND_SUPPORT */ void jump_to_image_no_args(void) { @@ -228,10 +256,17 @@ void board_init_r(gd_t *id, ulong dummy) boot_device = omap_boot_device(); debug("boot device - %d\n", boot_device); switch (boot_device) { +#ifdef CONFIG_SPL_MMC_SUPPORT case BOOT_DEVICE_MMC1: case BOOT_DEVICE_MMC2: mmc_load_image(); break; +#endif +#ifdef CONFIG_SPL_NAND_SUPPORT + case BOOT_DEVICE_NAND: + nand_load_image(); + break; +#endif default: printf("SPL: Un-supported Boot Device - %d!!!\n", boot_device); hang(); @@ -259,7 +294,11 @@ void preloader_console_init(void) gd->flags |= GD_FLG_RELOC; gd->baudrate = CONFIG_BAUDRATE; +/* Console clock for OMAP3 is already initialized by per_clocks_enable() + * called in board.c by s_init() */ +#ifndef CONFIG_OMAP34XX setup_clocks_for_console(); +#endif serial_init(); /* serial communications setup */ /* Avoid a second "U-Boot" coming from this string */ @@ -270,3 +309,11 @@ void preloader_console_init(void) omap_rev_string(rev_string_buffer); printf("Texas Instruments %s\n", rev_string_buffer); } + +int do_reset(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) +{ + debug("resetting cpu..."); + reset_cpu(0); + + return 0; +} diff --git a/arch/arm/include/asm/omap_common.h b/arch/arm/include/asm/omap_common.h index d3cb857..13f6884 100644 --- a/arch/arm/include/asm/omap_common.h +++ b/arch/arm/include/asm/omap_common.h @@ -49,6 +49,7 @@ void preloader_console_init(void); #define MMCSD_MODE_UNDEFINED 0 #define MMCSD_MODE_RAW 1 #define MMCSD_MODE_FAT 2 +#define NAND_MODE_HW_ECC 3 u32 omap_boot_device(void); u32 omap_boot_mode(void); diff --git a/include/nand.h b/include/nand.h index 8d94b5c..3c5ef4e 100644 --- a/include/nand.h +++ b/include/nand.h @@ -132,6 +132,9 @@ int nand_lock( nand_info_t *meminfo, int tight ); int nand_unlock( nand_info_t *meminfo, ulong start, ulong length ); int nand_get_lock_status(nand_info_t *meminfo, loff_t offset); +void nand_spl_load_image(loff_t offs, unsigned int size, uchar *dst); +void nand_deselect(void); + #ifdef CONFIG_SYS_NAND_SELECT_DEVICE void board_nand_select_device(struct nand_chip *nand, int chip); #endif -- 1.7.4.1