[U-Boot] Pull request: u-boot-arm/master -- updated

[Reinhard Meyer <u-boot@emk-elektronik.de>]

Dear Wolfgang,
> > Hm... current build results are shattering; building for ARM with good
> > old ELDK 4.2 gives this:
> > 
> > --------------------- SUMMARY ----------------------------
> > Boards compiled: 201
> > Boards with warnings or errors: 99 ( assabet dnp1110 gcplus lart shannon ap7 ap720t armadillo
> > B2 ep7312 evb4510 impa7 integratorap lpc2292sodimm modnet50 SMN42 ap920t ap922_XA10 
> > ap926ejs ap946es ap966 cp920t cp922_XA10 cp926ejs cp946es cp966 edb9301 edb9302 edb9302a
> > edb9307 edb9307a edb9312 edb9315 edb9315a imx27lite jadecpu lpd7a400 magnesium mx1fs2 netstar
> > sbc2410x scb9328 smdk2400 smdk2410 spear300 spear310 spear320 spear600 VCMA9 versatile
> > versatileab versatilepb voiceblue integratorcp cp1026 cp1136 omap2420h4 apollon imx31
> > litekit imx31_phycore imx31_phycore_eet mx31ads mx31pdk mx31pdk_nand qong dig297 igep0020
> > mx51evk omap3_beagle omap3_overo omap3_evm omap3_zoom2 omap4_panda omap4_sdp4430
> --
> > at91cap9adk meesc meesc_dataflash pm9261 pm9263 at91sam9m10g45ek pm9g45 SBC35_A9G20 TNY_A9260 TNY_A9G20
> --
> > csb226 lubbock zylonite actux1_4_16 actux1_8_16 actux1_4_32 actux1_8_32 actux2 actux3 actux4
> > dvlhost ixdp425 ixdpg425 pdnb3 scpu )
> > ----------------------------------------------------------
> 
> For the Atmel boards this is correct for the current state of the ARM
> repo. It concurs with what my 4.5.2 gnu toolchain (running on 32 BIT)
> says.

That even concurs with what Albert has written after merging the Atmel
repo:
"Overall ARM builds (./MAKEALL arm) went from 199 boards built, 119 with
warnings or errors before applying, to 201 boards, 97 with warnings or 
errors once applied."
So it is about the same for EDLK (on 64 Bit?)

I just pulled u-boot.git/master. It builds fine for all AT91 boards that
have been fixed in that repo.

Question is: what goes wrong if ELDK is on 32 Bit?

Reinhard