From mboxrd@z Thu Jan 1 00:00:00 1970 From: s.hauer@pengutronix.de (Sascha Hauer) Date: Wed, 24 Aug 2011 10:03:05 +0200 Subject: [PATCH 2/4] ARM i.MX: allow to compile together all i.MX5 based SoCs In-Reply-To: <1314172987-10349-1-git-send-email-s.hauer@pengutronix.de> References: <1314172987-10349-1-git-send-email-s.hauer@pengutronix.de> Message-ID: <1314172987-10349-3-git-send-email-s.hauer@pengutronix.de> To: linux-arm-kernel@lists.infradead.org List-Id: linux-arm-kernel.lists.infradead.org For this we need CONFIG_AUTO_ZRELADDR and CONFIG_ARM_PATCH_PHYS_VIRT. Signed-off-by: Sascha Hauer --- arch/arm/mach-mx5/Kconfig | 18 ++++-------------- arch/arm/plat-mxc/Kconfig | 20 ++++---------------- arch/arm/plat-mxc/include/mach/memory.h | 6 ------ 3 files changed, 8 insertions(+), 36 deletions(-) diff --git a/arch/arm/mach-mx5/Kconfig b/arch/arm/mach-mx5/Kconfig index b4e7c58..6880691 100644 --- a/arch/arm/mach-mx5/Kconfig +++ b/arch/arm/mach-mx5/Kconfig @@ -1,8 +1,9 @@ -if ARCH_MX503 || ARCH_MX51 +if ARCH_MX5 + # ARCH_MX5/50/53 are left to mark places where prevent multi-soc in single # image. So for most time, SOC_IMX50/51/53 should be used. -config ARCH_MX5 +config ARCH_MX51 bool config ARCH_MX50 @@ -19,7 +20,6 @@ config SOC_IMX50 select ARCH_MXC_IOMUX_V3 select ARCH_MXC_AUDMUX_V2 select ARCH_HAS_CPUFREQ - select ARCH_MX5 select ARCH_MX50 config SOC_IMX51 @@ -30,7 +30,7 @@ config SOC_IMX51 select ARCH_MXC_IOMUX_V3 select ARCH_MXC_AUDMUX_V2 select ARCH_HAS_CPUFREQ - select ARCH_MX5 + select ARCH_MX51 config SOC_IMX53 bool @@ -38,10 +38,8 @@ config SOC_IMX53 select ARM_L1_CACHE_SHIFT_6 select MXC_TZIC select ARCH_MXC_IOMUX_V3 - select ARCH_MX5 select ARCH_MX53 -if ARCH_MX50_SUPPORTED #comment "i.MX50 machines:" config MACH_MX50_RDP @@ -57,9 +55,6 @@ config MACH_MX50_RDP Include support for MX50 reference design platform (RDP) board. This includes specific configurations for the board and its peripherals. -endif # ARCH_MX50_SUPPORTED - -if ARCH_MX51 comment "i.MX51 machines:" config MACH_MX51_BABBAGE @@ -167,9 +162,6 @@ config MACH_MX51_EFIKASB Include support for Genesi Efika Smartbook. This includes specific configurations for the board and its peripherals. -endif # ARCH_MX51 - -if ARCH_MX53_SUPPORTED comment "i.MX53 machines:" config MACH_MX53_EVK @@ -221,6 +213,4 @@ config MACH_MX53_ARD Include support for MX53 ARD platform. This includes specific configurations for the board and its peripherals. -endif # ARCH_MX53_SUPPORTED - endif diff --git a/arch/arm/plat-mxc/Kconfig b/arch/arm/plat-mxc/Kconfig index 0665c1f..502e45f 100644 --- a/arch/arm/plat-mxc/Kconfig +++ b/arch/arm/plat-mxc/Kconfig @@ -4,12 +4,6 @@ source "arch/arm/plat-mxc/devices/Kconfig" menu "Freescale MXC Implementations" -config ARCH_MX50_SUPPORTED - bool - -config ARCH_MX53_SUPPORTED - bool - choice prompt "Freescale CPU family:" default ARCH_MX3 @@ -27,20 +21,14 @@ config ARCH_MX3 help This enables support for systems based on the Freescale i.MX3 family -config ARCH_MX503 - bool "i.MX50 + i.MX53" - select ARCH_MX50_SUPPORTED - select ARCH_MX53_SUPPORTED +config ARCH_MX5 + bool "i.MX50, i.MX51, i.MX53" + select AUTO_ZRELADDR + select ARM_PATCH_PHYS_VIRT help This enables support for machines using Freescale's i.MX50 and i.MX51 processors. -config ARCH_MX51 - bool "i.MX51" - select ARCH_MX51_SUPPORTED - help - This enables support for systems based on the Freescale i.MX51 family - endchoice source "arch/arm/mach-imx/Kconfig" diff --git a/arch/arm/plat-mxc/include/mach/memory.h b/arch/arm/plat-mxc/include/mach/memory.h index cbe2e3d..35e6c7f 100644 --- a/arch/arm/plat-mxc/include/mach/memory.h +++ b/arch/arm/plat-mxc/include/mach/memory.h @@ -23,12 +23,6 @@ #if !defined(CONFIG_RUNTIME_PHYS_OFFSET) # if defined CONFIG_ARCH_MX3 # define PLAT_PHYS_OFFSET MX3x_PHYS_OFFSET -# elif defined CONFIG_ARCH_MX50 -# define PLAT_PHYS_OFFSET MX50_PHYS_OFFSET -# elif defined CONFIG_ARCH_MX51 -# define PLAT_PHYS_OFFSET MX51_PHYS_OFFSET -# elif defined CONFIG_ARCH_MX53 -# define PLAT_PHYS_OFFSET MX53_PHYS_OFFSET # endif #endif -- 1.7.5.4