* [PATCH v4 00/18] Introduce a led trigger for CPU activity and consolidate LED driver in ARM
@ 2011-08-26 9:03 ` Bryan Wu
0 siblings, 0 replies; 49+ messages in thread
From: Bryan Wu @ 2011-08-26 9:03 UTC (permalink / raw)
To: linux, linus.walleij, rpurdie, tony, jochen, linux,
nicolas.pitre, arnd, linux-arm-kernel, jamie, linux-kernel
Based on Linus Walleij's ARM LED consolidation work, this patchset introduce a
new generic led trigger for CPU not only for ARM but also for others.
For enabling CPU idle event, CPU arch code should call ledtrig_cpu() stub to
trigger idle start or idle end event.
These patches convert old style LED driver in arch/arm to gpio_led or new led
driver interface. Against 3.1-rc3 and build successfully for all the machines.
Test ledtrig-cpu driver on OMAP4 Panda board.
--
root@omap4430-panda:~# uname -a
Linux omap4430-panda 3.1.0-rc1-07641-gb154376 #1 SMP Wed Aug 10 18:26:24 CST 2011 armv7l unknown
root@omap4430-panda:~# dmesg | grep trig
[ 1.891265] LED trigger cpu0 indicate activity on CPU 0
[ 1.896728] LED trigger cpu1 indicate activity on CPU 1
root@omap4430-panda:~# cat /sys/class/leds/pandaboard\:\:status1/trigger
none nand-disk mmc0 mmc1 timer [heartbeat] cpu0 cpu1
root@omap4430-panda:~# cat /sys/class/leds/pandaboard\:\:status2/trigger
none nand-disk [mmc0] mmc1 timer heartbeat cpu0 cpu1
root@omap4430-panda:~# echo cpu0 > /sys/class/leds/pandaboard\:\:status1/trigger
root@omap4430-panda:~# cat /sys/class/leds/pandaboard\:\:status1/trigger
none nand-disk mmc0 mmc1 timer heartbeat [cpu0] cpu1
root@omap4430-panda:~# echo cpu1 > /sys/class/leds/pandaboard\:\:status2/trigger
root@omap4430-panda:~# cat /sys/class/leds/pandaboard\:\:status2/trigger
none nand-disk mmc0 mmc1 timer heartbeat cpu0 [cpu1]
Then try some heavy task like dd and use taskset to assign the task to a specific CPU,
LED will turn on or off as expect
--
Please find these patches here:
git://kernel.ubuntu.com/roc/linux-2.6/.git leds
v3 --> v4:
* fix a typo pointed by Jochen Friedrich
* fix some building errors
* add Reviewed-by and Tested-by into patch log
v2 --> v3:
* almost rewrote the whole ledtrig-cpu driver, which is more simple
* every CPU will have a per-CPU trigger
* cpu trigger can be assigned to any leds
* fix a lockdep issue in led-trigger common code
* other fix according to review
v1 --> v2:
* remove select operations in Kconfig of every machines
* add back supporting of led in core module of mach-integrator
* solidate name scheme in ledtrig-cpu.c
* add comments of CPU_LED_* cpu led events
* fold patches of RealView and Versatile together
* add machine_is_ check during assabet led driver init
* add some Acked-by in patch logs
* remove code for simpad machine in machine-sa11000, since Jochen Friedrich
introduced gpiolib and gpio-led driver for simpad
* on Assabet and Netwinder machine, LED operations is reversed like:
setting bit means turn off leds
clearing bit means turn on leds
* add a new function to read CM_CTRL register for led driver
This patchset is based on patches from Jochen Friedrich for simpad, which
are 7024/1, 7025/1, 7026/1, and 7027/1 in Russell's patch system.
Bryan Wu (17):
led-triggers: use atomic kzalloc during led trigger registering
led-triggers: create a trigger for CPU activity
arm: at91: convert old leds drivers to gpio_led and led_trigger
drivers
mach-ks8695: remove leds driver, since nobody use it
mach-shark: retire custom LED code
mach-orion5x: convert custom LED code to gpio_led and LED CPU trigger
mach-integrator: move CM_CTRL to header file for accessing by other
functions
mach-integrator: retire custom LED code
mach-clps711x: retire custom LED code of P720T machine
mach-ebsa110: retire custom LED code
mach-footbridge: retire custom LED code
mach-pxa: retire custom LED code
plat-samsung: remove including old leds event API header file
mach-pnx4008: remove including old leds event API header file
mach-omap1: retire custom LED code
mach-sa1100: retire custom LED code
ARM: use new LEDS CPU trigger stub to replace old one
Linus Walleij (1):
mach-realview and mach-versatile: retire custom LED code
arch/arm/Kconfig | 53 -----
arch/arm/include/asm/leds.h | 50 ----
arch/arm/kernel/Makefile | 1 -
arch/arm/kernel/leds.c | 119 ----------
arch/arm/kernel/process.c | 6 +-
arch/arm/kernel/time.c | 17 --
arch/arm/mach-at91/board-cap9adk.c | 21 ++-
arch/arm/mach-at91/board-csb337.c | 3 -
arch/arm/mach-at91/board-ecbat91.c | 18 ++-
arch/arm/mach-at91/board-eco920.c | 23 ++-
arch/arm/mach-at91/board-kafa.c | 17 ++-
arch/arm/mach-at91/board-kb9202.c | 23 ++-
arch/arm/mach-at91/board-rm9200dk.c | 3 -
arch/arm/mach-at91/board-rm9200ek.c | 3 -
arch/arm/mach-at91/board-sam9-l9260.c | 23 ++-
arch/arm/mach-at91/board-sam9261ek.c | 3 -
arch/arm/mach-at91/board-yl-9200.c | 3 -
arch/arm/mach-at91/include/mach/board.h | 1 -
arch/arm/mach-at91/leds.c | 105 ---------
arch/arm/mach-clps711x/Makefile | 2 -
arch/arm/mach-clps711x/include/mach/time.h | 2 -
arch/arm/mach-clps711x/p720t-leds.c | 67 ------
arch/arm/mach-clps711x/p720t.c | 60 +++++
arch/arm/mach-clps711x/time.c | 1 -
arch/arm/mach-ebsa110/Makefile | 4 +-
arch/arm/mach-ebsa110/leds.c | 80 ++++---
arch/arm/mach-footbridge/Makefile | 4 -
arch/arm/mach-footbridge/ebsa285-leds.c | 139 -----------
arch/arm/mach-footbridge/ebsa285.c | 79 +++++++
arch/arm/mach-footbridge/include/mach/system.h | 1 -
arch/arm/mach-footbridge/netwinder-hw.c | 110 ++++++++--
arch/arm/mach-footbridge/netwinder-leds.c | 139 -----------
arch/arm/mach-integrator/Makefile | 3 +-
arch/arm/mach-integrator/core.c | 3 -
arch/arm/mach-integrator/include/mach/cm.h | 2 +
arch/arm/mach-integrator/leds.c | 159 ++++++++-----
arch/arm/mach-ks8695/Makefile | 3 -
arch/arm/mach-ks8695/devices.c | 21 --
arch/arm/mach-ks8695/include/mach/devices.h | 5 -
arch/arm/mach-ks8695/leds.c | 93 --------
arch/arm/mach-omap1/Makefile | 8 -
arch/arm/mach-omap1/board-h2.c | 34 +++-
arch/arm/mach-omap1/board-h3.c | 34 +++-
arch/arm/mach-omap1/board-osk.c | 33 +++
arch/arm/mach-omap1/leds-h2p2-debug.c | 167 --------------
arch/arm/mach-omap1/leds-innovator.c | 99 --------
arch/arm/mach-omap1/leds-osk.c | 115 ----------
arch/arm/mach-omap1/leds.c | 69 ------
arch/arm/mach-omap1/leds.h | 3 -
arch/arm/mach-omap1/time.c | 1 -
arch/arm/mach-omap1/timer32k.c | 1 -
arch/arm/mach-orion5x/rd88f5181l-fxo-setup.c | 1 -
arch/arm/mach-orion5x/rd88f5181l-ge-setup.c | 1 -
arch/arm/mach-orion5x/rd88f5182-setup.c | 74 ++----
arch/arm/mach-orion5x/rd88f6183ap-ge-setup.c | 1 -
arch/arm/mach-pnx4008/time.c | 1 -
arch/arm/mach-pxa/Makefile | 8 -
arch/arm/mach-pxa/idp.c | 79 +++++++
arch/arm/mach-pxa/leds-idp.c | 116 ----------
arch/arm/mach-pxa/leds-lubbock.c | 125 ----------
arch/arm/mach-pxa/leds-mainstone.c | 120 ----------
arch/arm/mach-pxa/leds.c | 32 ---
arch/arm/mach-pxa/leds.h | 13 -
arch/arm/mach-pxa/lubbock.c | 93 ++++++++
arch/arm/mach-pxa/mainstone.c | 92 ++++++++
arch/arm/mach-realview/core.c | 39 ----
arch/arm/mach-realview/core.h | 2 -
arch/arm/mach-realview/realview_eb.c | 4 -
arch/arm/mach-realview/realview_pb1176.c | 4 -
arch/arm/mach-realview/realview_pb11mp.c | 4 -
arch/arm/mach-realview/realview_pba8.c | 4 -
arch/arm/mach-realview/realview_pbx.c | 4 -
arch/arm/mach-sa1100/Makefile | 9 -
arch/arm/mach-sa1100/assabet.c | 83 +++++++
arch/arm/mach-sa1100/badge4.c | 30 +++
arch/arm/mach-sa1100/cerf.c | 42 ++++
arch/arm/mach-sa1100/hackkit.c | 32 +++
arch/arm/mach-sa1100/lart.c | 26 ++
arch/arm/mach-sa1100/leds-assabet.c | 114 ---------
arch/arm/mach-sa1100/leds-badge4.c | 111 ---------
arch/arm/mach-sa1100/leds-cerf.c | 110 ---------
arch/arm/mach-sa1100/leds-hackkit.c | 112 ---------
arch/arm/mach-sa1100/leds-lart.c | 101 --------
arch/arm/mach-sa1100/leds.c | 50 ----
arch/arm/mach-sa1100/leds.h | 13 -
arch/arm/mach-shark/Makefile | 4 +-
arch/arm/mach-shark/core.c | 1 -
arch/arm/mach-shark/leds.c | 227 +++++++-----------
arch/arm/mach-versatile/core.c | 42 ----
arch/arm/plat-omap/Kconfig | 3 +-
arch/arm/plat-omap/debug-leds.c | 292 ++++++------------------
arch/arm/plat-samsung/time.c | 1 -
arch/arm/plat-versatile/Kconfig | 2 +-
arch/arm/plat-versatile/leds.c | 13 +-
drivers/leds/Kconfig | 10 +
drivers/leds/Makefile | 1 +
drivers/leds/led-triggers.c | 2 +-
drivers/leds/ledtrig-cpu.c | 120 ++++++++++
include/linux/leds.h | 15 ++
99 files changed, 1406 insertions(+), 3010 deletions(-)
delete mode 100644 arch/arm/include/asm/leds.h
delete mode 100644 arch/arm/kernel/leds.c
delete mode 100644 arch/arm/mach-clps711x/p720t-leds.c
delete mode 100644 arch/arm/mach-footbridge/ebsa285-leds.c
delete mode 100644 arch/arm/mach-footbridge/netwinder-leds.c
delete mode 100644 arch/arm/mach-ks8695/leds.c
delete mode 100644 arch/arm/mach-omap1/leds-h2p2-debug.c
delete mode 100644 arch/arm/mach-omap1/leds-innovator.c
delete mode 100644 arch/arm/mach-omap1/leds-osk.c
delete mode 100644 arch/arm/mach-omap1/leds.c
delete mode 100644 arch/arm/mach-omap1/leds.h
delete mode 100644 arch/arm/mach-pxa/leds-idp.c
delete mode 100644 arch/arm/mach-pxa/leds-lubbock.c
delete mode 100644 arch/arm/mach-pxa/leds-mainstone.c
delete mode 100644 arch/arm/mach-pxa/leds.c
delete mode 100644 arch/arm/mach-pxa/leds.h
delete mode 100644 arch/arm/mach-sa1100/leds-assabet.c
delete mode 100644 arch/arm/mach-sa1100/leds-badge4.c
delete mode 100644 arch/arm/mach-sa1100/leds-cerf.c
delete mode 100644 arch/arm/mach-sa1100/leds-hackkit.c
delete mode 100644 arch/arm/mach-sa1100/leds-lart.c
delete mode 100644 arch/arm/mach-sa1100/leds.c
delete mode 100644 arch/arm/mach-sa1100/leds.h
create mode 100644 drivers/leds/ledtrig-cpu.c
--
1.7.5
^ permalink raw reply [flat|nested] 49+ messages in thread
* [PATCH v4 00/18] Introduce a led trigger for CPU activity and consolidate LED driver in ARM
@ 2011-08-26 9:03 ` Bryan Wu
0 siblings, 0 replies; 49+ messages in thread
From: Bryan Wu @ 2011-08-26 9:03 UTC (permalink / raw)
To: linux-arm-kernel
Based on Linus Walleij's ARM LED consolidation work, this patchset introduce a
new generic led trigger for CPU not only for ARM but also for others.
For enabling CPU idle event, CPU arch code should call ledtrig_cpu() stub to
trigger idle start or idle end event.
These patches convert old style LED driver in arch/arm to gpio_led or new led
driver interface. Against 3.1-rc3 and build successfully for all the machines.
Test ledtrig-cpu driver on OMAP4 Panda board.
--
root at omap4430-panda:~# uname -a
Linux omap4430-panda 3.1.0-rc1-07641-gb154376 #1 SMP Wed Aug 10 18:26:24 CST 2011 armv7l unknown
root at omap4430-panda:~# dmesg | grep trig
[ 1.891265] LED trigger cpu0 indicate activity on CPU 0
[ 1.896728] LED trigger cpu1 indicate activity on CPU 1
root at omap4430-panda:~# cat /sys/class/leds/pandaboard\:\:status1/trigger
none nand-disk mmc0 mmc1 timer [heartbeat] cpu0 cpu1
root at omap4430-panda:~# cat /sys/class/leds/pandaboard\:\:status2/trigger
none nand-disk [mmc0] mmc1 timer heartbeat cpu0 cpu1
root at omap4430-panda:~# echo cpu0 > /sys/class/leds/pandaboard\:\:status1/trigger
root at omap4430-panda:~# cat /sys/class/leds/pandaboard\:\:status1/trigger
none nand-disk mmc0 mmc1 timer heartbeat [cpu0] cpu1
root at omap4430-panda:~# echo cpu1 > /sys/class/leds/pandaboard\:\:status2/trigger
root at omap4430-panda:~# cat /sys/class/leds/pandaboard\:\:status2/trigger
none nand-disk mmc0 mmc1 timer heartbeat cpu0 [cpu1]
Then try some heavy task like dd and use taskset to assign the task to a specific CPU,
LED will turn on or off as expect
--
Please find these patches here:
git://kernel.ubuntu.com/roc/linux-2.6/.git leds
v3 --> v4:
* fix a typo pointed by Jochen Friedrich
* fix some building errors
* add Reviewed-by and Tested-by into patch log
v2 --> v3:
* almost rewrote the whole ledtrig-cpu driver, which is more simple
* every CPU will have a per-CPU trigger
* cpu trigger can be assigned to any leds
* fix a lockdep issue in led-trigger common code
* other fix according to review
v1 --> v2:
* remove select operations in Kconfig of every machines
* add back supporting of led in core module of mach-integrator
* solidate name scheme in ledtrig-cpu.c
* add comments of CPU_LED_* cpu led events
* fold patches of RealView and Versatile together
* add machine_is_ check during assabet led driver init
* add some Acked-by in patch logs
* remove code for simpad machine in machine-sa11000, since Jochen Friedrich
introduced gpiolib and gpio-led driver for simpad
* on Assabet and Netwinder machine, LED operations is reversed like:
setting bit means turn off leds
clearing bit means turn on leds
* add a new function to read CM_CTRL register for led driver
This patchset is based on patches from Jochen Friedrich for simpad, which
are 7024/1, 7025/1, 7026/1, and 7027/1 in Russell's patch system.
Bryan Wu (17):
led-triggers: use atomic kzalloc during led trigger registering
led-triggers: create a trigger for CPU activity
arm: at91: convert old leds drivers to gpio_led and led_trigger
drivers
mach-ks8695: remove leds driver, since nobody use it
mach-shark: retire custom LED code
mach-orion5x: convert custom LED code to gpio_led and LED CPU trigger
mach-integrator: move CM_CTRL to header file for accessing by other
functions
mach-integrator: retire custom LED code
mach-clps711x: retire custom LED code of P720T machine
mach-ebsa110: retire custom LED code
mach-footbridge: retire custom LED code
mach-pxa: retire custom LED code
plat-samsung: remove including old leds event API header file
mach-pnx4008: remove including old leds event API header file
mach-omap1: retire custom LED code
mach-sa1100: retire custom LED code
ARM: use new LEDS CPU trigger stub to replace old one
Linus Walleij (1):
mach-realview and mach-versatile: retire custom LED code
arch/arm/Kconfig | 53 -----
arch/arm/include/asm/leds.h | 50 ----
arch/arm/kernel/Makefile | 1 -
arch/arm/kernel/leds.c | 119 ----------
arch/arm/kernel/process.c | 6 +-
arch/arm/kernel/time.c | 17 --
arch/arm/mach-at91/board-cap9adk.c | 21 ++-
arch/arm/mach-at91/board-csb337.c | 3 -
arch/arm/mach-at91/board-ecbat91.c | 18 ++-
arch/arm/mach-at91/board-eco920.c | 23 ++-
arch/arm/mach-at91/board-kafa.c | 17 ++-
arch/arm/mach-at91/board-kb9202.c | 23 ++-
arch/arm/mach-at91/board-rm9200dk.c | 3 -
arch/arm/mach-at91/board-rm9200ek.c | 3 -
arch/arm/mach-at91/board-sam9-l9260.c | 23 ++-
arch/arm/mach-at91/board-sam9261ek.c | 3 -
arch/arm/mach-at91/board-yl-9200.c | 3 -
arch/arm/mach-at91/include/mach/board.h | 1 -
arch/arm/mach-at91/leds.c | 105 ---------
arch/arm/mach-clps711x/Makefile | 2 -
arch/arm/mach-clps711x/include/mach/time.h | 2 -
arch/arm/mach-clps711x/p720t-leds.c | 67 ------
arch/arm/mach-clps711x/p720t.c | 60 +++++
arch/arm/mach-clps711x/time.c | 1 -
arch/arm/mach-ebsa110/Makefile | 4 +-
arch/arm/mach-ebsa110/leds.c | 80 ++++---
arch/arm/mach-footbridge/Makefile | 4 -
arch/arm/mach-footbridge/ebsa285-leds.c | 139 -----------
arch/arm/mach-footbridge/ebsa285.c | 79 +++++++
arch/arm/mach-footbridge/include/mach/system.h | 1 -
arch/arm/mach-footbridge/netwinder-hw.c | 110 ++++++++--
arch/arm/mach-footbridge/netwinder-leds.c | 139 -----------
arch/arm/mach-integrator/Makefile | 3 +-
arch/arm/mach-integrator/core.c | 3 -
arch/arm/mach-integrator/include/mach/cm.h | 2 +
arch/arm/mach-integrator/leds.c | 159 ++++++++-----
arch/arm/mach-ks8695/Makefile | 3 -
arch/arm/mach-ks8695/devices.c | 21 --
arch/arm/mach-ks8695/include/mach/devices.h | 5 -
arch/arm/mach-ks8695/leds.c | 93 --------
arch/arm/mach-omap1/Makefile | 8 -
arch/arm/mach-omap1/board-h2.c | 34 +++-
arch/arm/mach-omap1/board-h3.c | 34 +++-
arch/arm/mach-omap1/board-osk.c | 33 +++
arch/arm/mach-omap1/leds-h2p2-debug.c | 167 --------------
arch/arm/mach-omap1/leds-innovator.c | 99 --------
arch/arm/mach-omap1/leds-osk.c | 115 ----------
arch/arm/mach-omap1/leds.c | 69 ------
arch/arm/mach-omap1/leds.h | 3 -
arch/arm/mach-omap1/time.c | 1 -
arch/arm/mach-omap1/timer32k.c | 1 -
arch/arm/mach-orion5x/rd88f5181l-fxo-setup.c | 1 -
arch/arm/mach-orion5x/rd88f5181l-ge-setup.c | 1 -
arch/arm/mach-orion5x/rd88f5182-setup.c | 74 ++----
arch/arm/mach-orion5x/rd88f6183ap-ge-setup.c | 1 -
arch/arm/mach-pnx4008/time.c | 1 -
arch/arm/mach-pxa/Makefile | 8 -
arch/arm/mach-pxa/idp.c | 79 +++++++
arch/arm/mach-pxa/leds-idp.c | 116 ----------
arch/arm/mach-pxa/leds-lubbock.c | 125 ----------
arch/arm/mach-pxa/leds-mainstone.c | 120 ----------
arch/arm/mach-pxa/leds.c | 32 ---
arch/arm/mach-pxa/leds.h | 13 -
arch/arm/mach-pxa/lubbock.c | 93 ++++++++
arch/arm/mach-pxa/mainstone.c | 92 ++++++++
arch/arm/mach-realview/core.c | 39 ----
arch/arm/mach-realview/core.h | 2 -
arch/arm/mach-realview/realview_eb.c | 4 -
arch/arm/mach-realview/realview_pb1176.c | 4 -
arch/arm/mach-realview/realview_pb11mp.c | 4 -
arch/arm/mach-realview/realview_pba8.c | 4 -
arch/arm/mach-realview/realview_pbx.c | 4 -
arch/arm/mach-sa1100/Makefile | 9 -
arch/arm/mach-sa1100/assabet.c | 83 +++++++
arch/arm/mach-sa1100/badge4.c | 30 +++
arch/arm/mach-sa1100/cerf.c | 42 ++++
arch/arm/mach-sa1100/hackkit.c | 32 +++
arch/arm/mach-sa1100/lart.c | 26 ++
arch/arm/mach-sa1100/leds-assabet.c | 114 ---------
arch/arm/mach-sa1100/leds-badge4.c | 111 ---------
arch/arm/mach-sa1100/leds-cerf.c | 110 ---------
arch/arm/mach-sa1100/leds-hackkit.c | 112 ---------
arch/arm/mach-sa1100/leds-lart.c | 101 --------
arch/arm/mach-sa1100/leds.c | 50 ----
arch/arm/mach-sa1100/leds.h | 13 -
arch/arm/mach-shark/Makefile | 4 +-
arch/arm/mach-shark/core.c | 1 -
arch/arm/mach-shark/leds.c | 227 +++++++-----------
arch/arm/mach-versatile/core.c | 42 ----
arch/arm/plat-omap/Kconfig | 3 +-
arch/arm/plat-omap/debug-leds.c | 292 ++++++------------------
arch/arm/plat-samsung/time.c | 1 -
arch/arm/plat-versatile/Kconfig | 2 +-
arch/arm/plat-versatile/leds.c | 13 +-
drivers/leds/Kconfig | 10 +
drivers/leds/Makefile | 1 +
drivers/leds/led-triggers.c | 2 +-
drivers/leds/ledtrig-cpu.c | 120 ++++++++++
include/linux/leds.h | 15 ++
99 files changed, 1406 insertions(+), 3010 deletions(-)
delete mode 100644 arch/arm/include/asm/leds.h
delete mode 100644 arch/arm/kernel/leds.c
delete mode 100644 arch/arm/mach-clps711x/p720t-leds.c
delete mode 100644 arch/arm/mach-footbridge/ebsa285-leds.c
delete mode 100644 arch/arm/mach-footbridge/netwinder-leds.c
delete mode 100644 arch/arm/mach-ks8695/leds.c
delete mode 100644 arch/arm/mach-omap1/leds-h2p2-debug.c
delete mode 100644 arch/arm/mach-omap1/leds-innovator.c
delete mode 100644 arch/arm/mach-omap1/leds-osk.c
delete mode 100644 arch/arm/mach-omap1/leds.c
delete mode 100644 arch/arm/mach-omap1/leds.h
delete mode 100644 arch/arm/mach-pxa/leds-idp.c
delete mode 100644 arch/arm/mach-pxa/leds-lubbock.c
delete mode 100644 arch/arm/mach-pxa/leds-mainstone.c
delete mode 100644 arch/arm/mach-pxa/leds.c
delete mode 100644 arch/arm/mach-pxa/leds.h
delete mode 100644 arch/arm/mach-sa1100/leds-assabet.c
delete mode 100644 arch/arm/mach-sa1100/leds-badge4.c
delete mode 100644 arch/arm/mach-sa1100/leds-cerf.c
delete mode 100644 arch/arm/mach-sa1100/leds-hackkit.c
delete mode 100644 arch/arm/mach-sa1100/leds-lart.c
delete mode 100644 arch/arm/mach-sa1100/leds.c
delete mode 100644 arch/arm/mach-sa1100/leds.h
create mode 100644 drivers/leds/ledtrig-cpu.c
--
1.7.5
^ permalink raw reply [flat|nested] 49+ messages in thread
* [PATCH 01/18] led-triggers: use atomic kzalloc during led trigger registering
2011-08-26 9:03 ` Bryan Wu
@ 2011-08-26 9:03 ` Bryan Wu
-1 siblings, 0 replies; 49+ messages in thread
From: Bryan Wu @ 2011-08-26 9:03 UTC (permalink / raw)
To: linux, linus.walleij, rpurdie, tony, jochen, linux,
nicolas.pitre, arnd, linux-arm-kernel, jamie, linux-kernel
kzalloc might cause sleep and will generate some warning detected by lockdep,
when call led_trigger_register_simple on each cpu cores in SMP. This patch fix
this.
[ 1.999938] ------------[ cut here ]------------
[ 2.004791] WARNING: at kernel/lockdep.c:2664 lockdep_trace_alloc+0xd8/0xf0()
[ 2.012298] Modules linked in:
[ 2.015563] [<c001b0cc>] (unwind_backtrace+0x0/0xf0) from [<c0052408>] (warn_slowpath_common+0x4c/0x64)
[ 2.025451] [<c0052408>] (warn_slowpath_common+0x4c/0x64) from [<c005243c>] (warn_slowpath_null+0x1c/0x24)
[ 2.035583] [<c005243c>] (warn_slowpath_null+0x1c/0x24) from [<c008be28>] (lockdep_trace_alloc+0xd8/0xf0)
[ 2.045684] [<c008be28>] (lockdep_trace_alloc+0xd8/0xf0) from [<c00feeb4>] (kmem_cache_alloc_trace+0x2c/0x148)
[ 2.056213] [<c00feeb4>] (kmem_cache_alloc_trace+0x2c/0x148) from [<c03770a0>] (led_trigger_register_simple+0x20/0x74)
[ 2.067474] [<c03770a0>] (led_trigger_register_simple+0x20/0x74) from [<c0627a30>] (ledtrig_cpu_register+0x4c/0x8c)
[ 2.078460] [<c0627a30>] (ledtrig_cpu_register+0x4c/0x8c) from [<c0094ca4>] (generic_smp_call_function_single_interrupt+0xcc/0x138)
[ 2.090911] [<c0094ca4>] (generic_smp_call_function_single_interrupt+0xcc/0x138) from [<c0008408>] (do_IPI+0xb0/0x128)
[ 2.102172] [<c0008408>] (do_IPI+0xb0/0x128) from [<c045921c>] (__irq_svc+0x3c/0x100)
[ 2.110412] Exception stack(0xc07adf70 to 0xc07adfb8)
[ 2.115722] df60: c07c80f8 0000fb45 00000000 c07c80f8
[ 2.124328] df80: c07ac000 c0837be4 c0464b64 c07c9d8c 00000000 411fc092 00000000 00000000
[ 2.132934] dfa0: c0649760 c07adfb8 c07c5c58 c0014d50 20000013 ffffffff
[ 2.139892] [<c045921c>] (__irq_svc+0x3c/0x100) from [<c0014d50>] (default_idle+0x30/0x38)
[ 2.148590] [<c0014d50>] (default_idle+0x30/0x38) from [<c0014f74>] (cpu_idle+0xb4/0xf4)
[ 2.157135] [<c0014f74>] (cpu_idle+0xb4/0xf4) from [<c0602778>] (start_kernel+0x2a8/0x2fc)
[ 2.165832] [<c0602778>] (start_kernel+0x2a8/0x2fc) from [<80008040>] (0x80008040)
[ 2.173797] ---[ end trace 97549d21d8dad3f5 ]---
Signed-off-by: Bryan Wu <bryan.wu@canonical.com>
---
drivers/leds/led-triggers.c | 2 +-
1 files changed, 1 insertions(+), 1 deletions(-)
diff --git a/drivers/leds/led-triggers.c b/drivers/leds/led-triggers.c
index 4bebae7..9a9c78d 100644
--- a/drivers/leds/led-triggers.c
+++ b/drivers/leds/led-triggers.c
@@ -256,7 +256,7 @@ void led_trigger_register_simple(const char *name, struct led_trigger **tp)
struct led_trigger *trigger;
int err;
- trigger = kzalloc(sizeof(struct led_trigger), GFP_KERNEL);
+ trigger = kzalloc(sizeof(struct led_trigger), GFP_ATOMIC);
if (trigger) {
trigger->name = name;
--
1.7.5
^ permalink raw reply related [flat|nested] 49+ messages in thread
* [PATCH 01/18] led-triggers: use atomic kzalloc during led trigger registering
@ 2011-08-26 9:03 ` Bryan Wu
0 siblings, 0 replies; 49+ messages in thread
From: Bryan Wu @ 2011-08-26 9:03 UTC (permalink / raw)
To: linux-arm-kernel
kzalloc might cause sleep and will generate some warning detected by lockdep,
when call led_trigger_register_simple on each cpu cores in SMP. This patch fix
this.
[ 1.999938] ------------[ cut here ]------------
[ 2.004791] WARNING: at kernel/lockdep.c:2664 lockdep_trace_alloc+0xd8/0xf0()
[ 2.012298] Modules linked in:
[ 2.015563] [<c001b0cc>] (unwind_backtrace+0x0/0xf0) from [<c0052408>] (warn_slowpath_common+0x4c/0x64)
[ 2.025451] [<c0052408>] (warn_slowpath_common+0x4c/0x64) from [<c005243c>] (warn_slowpath_null+0x1c/0x24)
[ 2.035583] [<c005243c>] (warn_slowpath_null+0x1c/0x24) from [<c008be28>] (lockdep_trace_alloc+0xd8/0xf0)
[ 2.045684] [<c008be28>] (lockdep_trace_alloc+0xd8/0xf0) from [<c00feeb4>] (kmem_cache_alloc_trace+0x2c/0x148)
[ 2.056213] [<c00feeb4>] (kmem_cache_alloc_trace+0x2c/0x148) from [<c03770a0>] (led_trigger_register_simple+0x20/0x74)
[ 2.067474] [<c03770a0>] (led_trigger_register_simple+0x20/0x74) from [<c0627a30>] (ledtrig_cpu_register+0x4c/0x8c)
[ 2.078460] [<c0627a30>] (ledtrig_cpu_register+0x4c/0x8c) from [<c0094ca4>] (generic_smp_call_function_single_interrupt+0xcc/0x138)
[ 2.090911] [<c0094ca4>] (generic_smp_call_function_single_interrupt+0xcc/0x138) from [<c0008408>] (do_IPI+0xb0/0x128)
[ 2.102172] [<c0008408>] (do_IPI+0xb0/0x128) from [<c045921c>] (__irq_svc+0x3c/0x100)
[ 2.110412] Exception stack(0xc07adf70 to 0xc07adfb8)
[ 2.115722] df60: c07c80f8 0000fb45 00000000 c07c80f8
[ 2.124328] df80: c07ac000 c0837be4 c0464b64 c07c9d8c 00000000 411fc092 00000000 00000000
[ 2.132934] dfa0: c0649760 c07adfb8 c07c5c58 c0014d50 20000013 ffffffff
[ 2.139892] [<c045921c>] (__irq_svc+0x3c/0x100) from [<c0014d50>] (default_idle+0x30/0x38)
[ 2.148590] [<c0014d50>] (default_idle+0x30/0x38) from [<c0014f74>] (cpu_idle+0xb4/0xf4)
[ 2.157135] [<c0014f74>] (cpu_idle+0xb4/0xf4) from [<c0602778>] (start_kernel+0x2a8/0x2fc)
[ 2.165832] [<c0602778>] (start_kernel+0x2a8/0x2fc) from [<80008040>] (0x80008040)
[ 2.173797] ---[ end trace 97549d21d8dad3f5 ]---
Signed-off-by: Bryan Wu <bryan.wu@canonical.com>
---
drivers/leds/led-triggers.c | 2 +-
1 files changed, 1 insertions(+), 1 deletions(-)
diff --git a/drivers/leds/led-triggers.c b/drivers/leds/led-triggers.c
index 4bebae7..9a9c78d 100644
--- a/drivers/leds/led-triggers.c
+++ b/drivers/leds/led-triggers.c
@@ -256,7 +256,7 @@ void led_trigger_register_simple(const char *name, struct led_trigger **tp)
struct led_trigger *trigger;
int err;
- trigger = kzalloc(sizeof(struct led_trigger), GFP_KERNEL);
+ trigger = kzalloc(sizeof(struct led_trigger), GFP_ATOMIC);
if (trigger) {
trigger->name = name;
--
1.7.5
^ permalink raw reply related [flat|nested] 49+ messages in thread
* [PATCH 02/18] led-triggers: create a trigger for CPU activity
2011-08-26 9:03 ` Bryan Wu
@ 2011-08-26 9:03 ` Bryan Wu
-1 siblings, 0 replies; 49+ messages in thread
From: Bryan Wu @ 2011-08-26 9:03 UTC (permalink / raw)
To: linux, linus.walleij, rpurdie, tony, jochen, linux,
nicolas.pitre, arnd, linux-arm-kernel, jamie, linux-kernel
Attempting to consolidate the ARM LED code, this removes the
custom RealView LED trigger code to turn LEDs on and off in
response to CPU activity and replace it with a standard trigger.
(bryan.wu@canonical.com:
It moves arch/arm/kernel/leds.c syscore stubs into this trigger.
It also provides ledtrig_cpu trigger event stub in <linux/leds.h>.
Although it was inspired by ARM work, it can be used in other arch.)
Cc: Richard Purdie <rpurdie@rpsys.net>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Bryan Wu <bryan.wu@canonical.com>
Reviewed-by: Jamie Iles <jamie@jamieiles.com>
Tested-by: Jochen Friedrich <jochen@scram.de>
---
drivers/leds/Kconfig | 10 ++++
drivers/leds/Makefile | 1 +
drivers/leds/ledtrig-cpu.c | 120 ++++++++++++++++++++++++++++++++++++++++++++
include/linux/leds.h | 15 ++++++
4 files changed, 146 insertions(+), 0 deletions(-)
create mode 100644 drivers/leds/ledtrig-cpu.c
diff --git a/drivers/leds/Kconfig b/drivers/leds/Kconfig
index b591e72..b444cc3 100644
--- a/drivers/leds/Kconfig
+++ b/drivers/leds/Kconfig
@@ -430,6 +430,16 @@ config LEDS_TRIGGER_BACKLIGHT
If unsure, say N.
+config LEDS_TRIGGER_CPU
+ tristate "LED CPU Trigger"
+ depends on LEDS_TRIGGERS
+ help
+ This allows LEDs to be controlled by active CPUs. This shows
+ the active CPUs across an array of LEDs so you can see what
+ CPUs are active on the system at any given moment.
+
+ If unsure, say N.
+
config LEDS_TRIGGER_GPIO
tristate "LED GPIO Trigger"
depends on LEDS_TRIGGERS
diff --git a/drivers/leds/Makefile b/drivers/leds/Makefile
index bbfd2e3..5e70d2e 100644
--- a/drivers/leds/Makefile
+++ b/drivers/leds/Makefile
@@ -53,4 +53,5 @@ obj-$(CONFIG_LEDS_TRIGGER_IDE_DISK) += ledtrig-ide-disk.o
obj-$(CONFIG_LEDS_TRIGGER_HEARTBEAT) += ledtrig-heartbeat.o
obj-$(CONFIG_LEDS_TRIGGER_BACKLIGHT) += ledtrig-backlight.o
obj-$(CONFIG_LEDS_TRIGGER_GPIO) += ledtrig-gpio.o
+obj-$(CONFIG_LEDS_TRIGGER_CPU) += ledtrig-cpu.o
obj-$(CONFIG_LEDS_TRIGGER_DEFAULT_ON) += ledtrig-default-on.o
diff --git a/drivers/leds/ledtrig-cpu.c b/drivers/leds/ledtrig-cpu.c
new file mode 100644
index 0000000..d00ca77
--- /dev/null
+++ b/drivers/leds/ledtrig-cpu.c
@@ -0,0 +1,120 @@
+/*
+ * ledtrig-cpu.c - LED trigger based on CPU activity
+ *
+ * Copyright 2011 Linus Walleij <linus.walleij@linaro.org>
+ * Copyright 2011 Bryan Wu <bryan.wu@canonical.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/slab.h>
+#include <linux/percpu.h>
+#include <linux/syscore_ops.h>
+#include "leds.h"
+
+static DEFINE_PER_CPU(struct led_trigger *, cpu_trig);
+static DEFINE_PER_CPU(char [8], trig_name);
+
+void ledtrig_cpu(enum cpu_led_event ledevt)
+{
+ struct led_trigger *trig = __get_cpu_var(cpu_trig);
+
+ if (!trig)
+ return;
+
+ /* Locate the correct CPU LED */
+
+ switch (ledevt) {
+ case CPU_LED_IDLE_END:
+ case CPU_LED_START:
+ /* Will turn the LED on, max brightness */
+ led_trigger_event(trig, LED_FULL);
+ break;
+
+ case CPU_LED_IDLE_START:
+ case CPU_LED_STOP:
+ case CPU_LED_HALTED:
+ /* Will turn the LED off */
+ led_trigger_event(trig, LED_OFF);
+ break;
+
+ default:
+ /* Will leave the LED as it is */
+ break;
+ }
+}
+EXPORT_SYMBOL(ledtrig_cpu);
+
+static int ledtrig_cpu_syscore_suspend(void)
+{
+ ledtrig_cpu(CPU_LED_STOP);
+ return 0;
+}
+
+static void ledtrig_cpu_syscore_resume(void)
+{
+ ledtrig_cpu(CPU_LED_START);
+}
+
+static void ledtrig_cpu_syscore_shutdown(void)
+{
+ ledtrig_cpu(CPU_LED_HALTED);
+}
+
+static struct syscore_ops ledtrig_cpu_syscore_ops = {
+ .shutdown = ledtrig_cpu_syscore_shutdown,
+ .suspend = ledtrig_cpu_syscore_suspend,
+ .resume = ledtrig_cpu_syscore_resume,
+};
+
+static void __init ledtrig_cpu_register(void *info)
+{
+ int cpuid = smp_processor_id();
+ struct led_trigger *trig;
+ char *name = __get_cpu_var(trig_name);
+
+ snprintf(name, 8, "cpu%d", cpuid);
+ led_trigger_register_simple(name, &trig);
+
+ pr_info("LED trigger %s indicate activity on CPU %d\n",
+ trig->name, cpuid);
+
+ __get_cpu_var(cpu_trig) = trig;
+}
+
+static void __exit ledtrig_cpu_unregister(void *info)
+{
+ struct led_trigger *trig = __get_cpu_var(cpu_trig);
+ char *name = __get_cpu_var(trig_name);
+
+ led_trigger_unregister_simple(trig);
+ __get_cpu_var(cpu_trig) = NULL;
+ memset(name, 0, 8);
+}
+
+static int __init ledtrig_cpu_init(void)
+{
+ on_each_cpu(ledtrig_cpu_register, NULL, 1);
+ register_syscore_ops(&ledtrig_cpu_syscore_ops);
+
+ return 0;
+}
+module_init(ledtrig_cpu_init);
+
+static void __exit ledtrig_cpu_exit(void)
+{
+ on_each_cpu(ledtrig_cpu_unregister, NULL, 1);
+ unregister_syscore_ops(&ledtrig_cpu_syscore_ops);
+}
+module_exit(ledtrig_cpu_exit);
+
+MODULE_AUTHOR("Linus Walleij <linus.walleij@linaro.org>");
+MODULE_AUTHOR("Bryan Wu <bryan.wu@canonical.com>");
+MODULE_DESCRIPTION("CPU LED trigger");
+MODULE_LICENSE("GPL");
diff --git a/include/linux/leds.h b/include/linux/leds.h
index 5884def..b782abd 100644
--- a/include/linux/leds.h
+++ b/include/linux/leds.h
@@ -210,4 +210,19 @@ struct gpio_led_platform_data {
struct platform_device *gpio_led_register_device(
int id, const struct gpio_led_platform_data *pdata);
+#ifdef CONFIG_LEDS_TRIGGER_CPU
+enum cpu_led_event {
+ CPU_LED_IDLE_START, /* CPU enters idle */
+ CPU_LED_IDLE_END, /* CPU idle ends */
+ CPU_LED_START, /* Machine starts, especially resume */
+ CPU_LED_STOP, /* Machine stops, especially suspend */
+ CPU_LED_HALTED, /* Machine shutdown */
+};
+
+/* Use this routine to handle LEDs */
+extern void ledtrig_cpu(enum cpu_led_event evt);
+#else
+#define ledtrig_cpu(evt) do {} while (0)
+#endif
+
#endif /* __LINUX_LEDS_H_INCLUDED */
--
1.7.5
^ permalink raw reply related [flat|nested] 49+ messages in thread
* [PATCH 02/18] led-triggers: create a trigger for CPU activity
@ 2011-08-26 9:03 ` Bryan Wu
0 siblings, 0 replies; 49+ messages in thread
From: Bryan Wu @ 2011-08-26 9:03 UTC (permalink / raw)
To: linux-arm-kernel
Attempting to consolidate the ARM LED code, this removes the
custom RealView LED trigger code to turn LEDs on and off in
response to CPU activity and replace it with a standard trigger.
(bryan.wu at canonical.com:
It moves arch/arm/kernel/leds.c syscore stubs into this trigger.
It also provides ledtrig_cpu trigger event stub in <linux/leds.h>.
Although it was inspired by ARM work, it can be used in other arch.)
Cc: Richard Purdie <rpurdie@rpsys.net>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Bryan Wu <bryan.wu@canonical.com>
Reviewed-by: Jamie Iles <jamie@jamieiles.com>
Tested-by: Jochen Friedrich <jochen@scram.de>
---
drivers/leds/Kconfig | 10 ++++
drivers/leds/Makefile | 1 +
drivers/leds/ledtrig-cpu.c | 120 ++++++++++++++++++++++++++++++++++++++++++++
include/linux/leds.h | 15 ++++++
4 files changed, 146 insertions(+), 0 deletions(-)
create mode 100644 drivers/leds/ledtrig-cpu.c
diff --git a/drivers/leds/Kconfig b/drivers/leds/Kconfig
index b591e72..b444cc3 100644
--- a/drivers/leds/Kconfig
+++ b/drivers/leds/Kconfig
@@ -430,6 +430,16 @@ config LEDS_TRIGGER_BACKLIGHT
If unsure, say N.
+config LEDS_TRIGGER_CPU
+ tristate "LED CPU Trigger"
+ depends on LEDS_TRIGGERS
+ help
+ This allows LEDs to be controlled by active CPUs. This shows
+ the active CPUs across an array of LEDs so you can see what
+ CPUs are active on the system at any given moment.
+
+ If unsure, say N.
+
config LEDS_TRIGGER_GPIO
tristate "LED GPIO Trigger"
depends on LEDS_TRIGGERS
diff --git a/drivers/leds/Makefile b/drivers/leds/Makefile
index bbfd2e3..5e70d2e 100644
--- a/drivers/leds/Makefile
+++ b/drivers/leds/Makefile
@@ -53,4 +53,5 @@ obj-$(CONFIG_LEDS_TRIGGER_IDE_DISK) += ledtrig-ide-disk.o
obj-$(CONFIG_LEDS_TRIGGER_HEARTBEAT) += ledtrig-heartbeat.o
obj-$(CONFIG_LEDS_TRIGGER_BACKLIGHT) += ledtrig-backlight.o
obj-$(CONFIG_LEDS_TRIGGER_GPIO) += ledtrig-gpio.o
+obj-$(CONFIG_LEDS_TRIGGER_CPU) += ledtrig-cpu.o
obj-$(CONFIG_LEDS_TRIGGER_DEFAULT_ON) += ledtrig-default-on.o
diff --git a/drivers/leds/ledtrig-cpu.c b/drivers/leds/ledtrig-cpu.c
new file mode 100644
index 0000000..d00ca77
--- /dev/null
+++ b/drivers/leds/ledtrig-cpu.c
@@ -0,0 +1,120 @@
+/*
+ * ledtrig-cpu.c - LED trigger based on CPU activity
+ *
+ * Copyright 2011 Linus Walleij <linus.walleij@linaro.org>
+ * Copyright 2011 Bryan Wu <bryan.wu@canonical.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/slab.h>
+#include <linux/percpu.h>
+#include <linux/syscore_ops.h>
+#include "leds.h"
+
+static DEFINE_PER_CPU(struct led_trigger *, cpu_trig);
+static DEFINE_PER_CPU(char [8], trig_name);
+
+void ledtrig_cpu(enum cpu_led_event ledevt)
+{
+ struct led_trigger *trig = __get_cpu_var(cpu_trig);
+
+ if (!trig)
+ return;
+
+ /* Locate the correct CPU LED */
+
+ switch (ledevt) {
+ case CPU_LED_IDLE_END:
+ case CPU_LED_START:
+ /* Will turn the LED on, max brightness */
+ led_trigger_event(trig, LED_FULL);
+ break;
+
+ case CPU_LED_IDLE_START:
+ case CPU_LED_STOP:
+ case CPU_LED_HALTED:
+ /* Will turn the LED off */
+ led_trigger_event(trig, LED_OFF);
+ break;
+
+ default:
+ /* Will leave the LED as it is */
+ break;
+ }
+}
+EXPORT_SYMBOL(ledtrig_cpu);
+
+static int ledtrig_cpu_syscore_suspend(void)
+{
+ ledtrig_cpu(CPU_LED_STOP);
+ return 0;
+}
+
+static void ledtrig_cpu_syscore_resume(void)
+{
+ ledtrig_cpu(CPU_LED_START);
+}
+
+static void ledtrig_cpu_syscore_shutdown(void)
+{
+ ledtrig_cpu(CPU_LED_HALTED);
+}
+
+static struct syscore_ops ledtrig_cpu_syscore_ops = {
+ .shutdown = ledtrig_cpu_syscore_shutdown,
+ .suspend = ledtrig_cpu_syscore_suspend,
+ .resume = ledtrig_cpu_syscore_resume,
+};
+
+static void __init ledtrig_cpu_register(void *info)
+{
+ int cpuid = smp_processor_id();
+ struct led_trigger *trig;
+ char *name = __get_cpu_var(trig_name);
+
+ snprintf(name, 8, "cpu%d", cpuid);
+ led_trigger_register_simple(name, &trig);
+
+ pr_info("LED trigger %s indicate activity on CPU %d\n",
+ trig->name, cpuid);
+
+ __get_cpu_var(cpu_trig) = trig;
+}
+
+static void __exit ledtrig_cpu_unregister(void *info)
+{
+ struct led_trigger *trig = __get_cpu_var(cpu_trig);
+ char *name = __get_cpu_var(trig_name);
+
+ led_trigger_unregister_simple(trig);
+ __get_cpu_var(cpu_trig) = NULL;
+ memset(name, 0, 8);
+}
+
+static int __init ledtrig_cpu_init(void)
+{
+ on_each_cpu(ledtrig_cpu_register, NULL, 1);
+ register_syscore_ops(&ledtrig_cpu_syscore_ops);
+
+ return 0;
+}
+module_init(ledtrig_cpu_init);
+
+static void __exit ledtrig_cpu_exit(void)
+{
+ on_each_cpu(ledtrig_cpu_unregister, NULL, 1);
+ unregister_syscore_ops(&ledtrig_cpu_syscore_ops);
+}
+module_exit(ledtrig_cpu_exit);
+
+MODULE_AUTHOR("Linus Walleij <linus.walleij@linaro.org>");
+MODULE_AUTHOR("Bryan Wu <bryan.wu@canonical.com>");
+MODULE_DESCRIPTION("CPU LED trigger");
+MODULE_LICENSE("GPL");
diff --git a/include/linux/leds.h b/include/linux/leds.h
index 5884def..b782abd 100644
--- a/include/linux/leds.h
+++ b/include/linux/leds.h
@@ -210,4 +210,19 @@ struct gpio_led_platform_data {
struct platform_device *gpio_led_register_device(
int id, const struct gpio_led_platform_data *pdata);
+#ifdef CONFIG_LEDS_TRIGGER_CPU
+enum cpu_led_event {
+ CPU_LED_IDLE_START, /* CPU enters idle */
+ CPU_LED_IDLE_END, /* CPU idle ends */
+ CPU_LED_START, /* Machine starts, especially resume */
+ CPU_LED_STOP, /* Machine stops, especially suspend */
+ CPU_LED_HALTED, /* Machine shutdown */
+};
+
+/* Use this routine to handle LEDs */
+extern void ledtrig_cpu(enum cpu_led_event evt);
+#else
+#define ledtrig_cpu(evt) do {} while (0)
+#endif
+
#endif /* __LINUX_LEDS_H_INCLUDED */
--
1.7.5
^ permalink raw reply related [flat|nested] 49+ messages in thread
* [PATCH 03/18] arm: at91: convert old leds drivers to gpio_led and led_trigger drivers
2011-08-26 9:03 ` Bryan Wu
@ 2011-08-26 9:03 ` Bryan Wu
-1 siblings, 0 replies; 49+ messages in thread
From: Bryan Wu @ 2011-08-26 9:03 UTC (permalink / raw)
To: linux, linus.walleij, rpurdie, tony, jochen, linux,
nicolas.pitre, arnd, linux-arm-kernel, jamie, linux-kernel
Build with at91 defconfigs successfully
Signed-off-by: Bryan Wu <bryan.wu@canonical.com>
Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Acked-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
---
arch/arm/mach-at91/board-cap9adk.c | 21 ++++++-
arch/arm/mach-at91/board-csb337.c | 3 -
arch/arm/mach-at91/board-ecbat91.c | 18 +++++-
arch/arm/mach-at91/board-eco920.c | 23 ++++++-
arch/arm/mach-at91/board-kafa.c | 17 ++++-
arch/arm/mach-at91/board-kb9202.c | 23 ++++++-
arch/arm/mach-at91/board-rm9200dk.c | 3 -
arch/arm/mach-at91/board-rm9200ek.c | 3 -
arch/arm/mach-at91/board-sam9-l9260.c | 23 ++++++-
arch/arm/mach-at91/board-sam9261ek.c | 3 -
arch/arm/mach-at91/board-yl-9200.c | 3 -
arch/arm/mach-at91/include/mach/board.h | 1 -
arch/arm/mach-at91/leds.c | 105 -------------------------------
13 files changed, 108 insertions(+), 138 deletions(-)
diff --git a/arch/arm/mach-at91/board-cap9adk.c b/arch/arm/mach-at91/board-cap9adk.c
index 679b0b7..0f95be9 100644
--- a/arch/arm/mach-at91/board-cap9adk.c
+++ b/arch/arm/mach-at91/board-cap9adk.c
@@ -55,8 +55,6 @@ static void __init cap9adk_init_early(void)
/* Initialize processor: 12 MHz crystal */
at91_initialize(12000000);
- /* Setup the LEDs: USER1 and USER2 LED for cpu/timer... */
- at91_init_leds(AT91_PIN_PA10, AT91_PIN_PA11);
/* ... POWER LED always on */
at91_set_gpio_output(AT91_PIN_PC29, 1);
@@ -359,6 +357,23 @@ static struct ac97c_platform_data cap9adk_ac97_data = {
// .reset_pin = ... not connected
};
+/*
+ * LEDs
+ */
+static struct gpio_led cap9adk_leds[] = {
+ { /* D1 */
+ .name = "led1",
+ .gpio = AT91_PIN_PA10,
+ .active_low = 1,
+ .default_trigger = "heartbeat",
+ },
+ { /* D2 */
+ .name = "led2",
+ .gpio = AT91_PIN_PA11,
+ .active_low = 1,
+ .default_trigger = "timer",
+ }
+};
static void __init cap9adk_board_init(void)
{
@@ -386,6 +401,8 @@ static void __init cap9adk_board_init(void)
at91_add_device_lcdc(&cap9adk_lcdc_data);
/* AC97 */
at91_add_device_ac97(&cap9adk_ac97_data);
+ /* LEDs */
+ at91_gpio_leds(cap9adk_leds, ARRAY_SIZE(cap9adk_leds));
}
MACHINE_START(AT91CAP9ADK, "Atmel AT91CAP9A-DK")
diff --git a/arch/arm/mach-at91/board-csb337.c b/arch/arm/mach-at91/board-csb337.c
index 17654d5..0b2cdee 100644
--- a/arch/arm/mach-at91/board-csb337.c
+++ b/arch/arm/mach-at91/board-csb337.c
@@ -48,9 +48,6 @@ static void __init csb337_init_early(void)
/* Initialize processor: 3.6864 MHz crystal */
at91_initialize(3686400);
- /* Setup the LEDs */
- at91_init_leds(AT91_PIN_PB0, AT91_PIN_PB1);
-
/* DBGU on ttyS0 */
at91_register_uart(0, 0, 0);
diff --git a/arch/arm/mach-at91/board-ecbat91.c b/arch/arm/mach-at91/board-ecbat91.c
index 7c0313c..15cbbe4 100644
--- a/arch/arm/mach-at91/board-ecbat91.c
+++ b/arch/arm/mach-at91/board-ecbat91.c
@@ -51,9 +51,6 @@ static void __init ecb_at91init_early(void)
/* Initialize processor: 18.432 MHz crystal */
at91_initialize(18432000);
- /* Setup the LEDs */
- at91_init_leds(AT91_PIN_PC7, AT91_PIN_PC7);
-
/* DBGU on ttyS0. (Rx & Tx only) */
at91_register_uart(0, 0, 0);
@@ -144,6 +141,18 @@ static struct spi_board_info __initdata ecb_at91spi_devices[] = {
},
};
+/*
+ * LEDs
+ */
+static struct gpio_led ecb_leds[] = {
+ { /* D1 */
+ .name = "led1",
+ .gpio = AT91_PIN_PC7,
+ .active_low = 1,
+ .default_trigger = "heartbeat",
+ }
+};
+
static void __init ecb_at91board_init(void)
{
/* Serial */
@@ -163,6 +172,9 @@ static void __init ecb_at91board_init(void)
/* SPI */
at91_add_device_spi(ecb_at91spi_devices, ARRAY_SIZE(ecb_at91spi_devices));
+
+ /* LEDs */
+ at91_gpio_leds(ecb_leds, ARRAY_SIZE(ecb_leds));
}
MACHINE_START(ECBAT91, "emQbit's ECB_AT91")
diff --git a/arch/arm/mach-at91/board-eco920.c b/arch/arm/mach-at91/board-eco920.c
index 8252c72..efa8e55 100644
--- a/arch/arm/mach-at91/board-eco920.c
+++ b/arch/arm/mach-at91/board-eco920.c
@@ -37,9 +37,6 @@ static void __init eco920_init_early(void)
at91_initialize(18432000);
- /* Setup the LEDs */
- at91_init_leds(AT91_PIN_PB0, AT91_PIN_PB1);
-
/* DBGU on ttyS0. (Rx & Tx only */
at91_register_uart(0, 0, 0);
@@ -95,6 +92,24 @@ static struct spi_board_info eco920_spi_devices[] = {
},
};
+/*
+ * LEDs
+ */
+static struct gpio_led eco920_leds[] = {
+ { /* D1 */
+ .name = "led1",
+ .gpio = AT91_PIN_PB0,
+ .active_low = 1,
+ .default_trigger = "heartbeat",
+ },
+ { /* D2 */
+ .name = "led2",
+ .gpio = AT91_PIN_PB1,
+ .active_low = 1,
+ .default_trigger = "timer",
+ }
+};
+
static void __init eco920_board_init(void)
{
at91_add_device_serial();
@@ -125,6 +140,8 @@ static void __init eco920_board_init(void)
);
at91_add_device_spi(eco920_spi_devices, ARRAY_SIZE(eco920_spi_devices));
+ /* LEDs */
+ at91_gpio_leds(eco920_leds, ARRAY_SIZE(eco920_leds));
}
MACHINE_START(ECO920, "eco920")
diff --git a/arch/arm/mach-at91/board-kafa.c b/arch/arm/mach-at91/board-kafa.c
index 4a17089..17a470b 100644
--- a/arch/arm/mach-at91/board-kafa.c
+++ b/arch/arm/mach-at91/board-kafa.c
@@ -48,9 +48,6 @@ static void __init kafa_init_early(void)
/* Initialize processor: 18.432 MHz crystal */
at91_initialize(18432000);
- /* Set up the LEDs */
- at91_init_leds(AT91_PIN_PB4, AT91_PIN_PB4);
-
/* DBGU on ttyS0. (Rx & Tx only) */
at91_register_uart(0, 0, 0);
@@ -75,6 +72,18 @@ static struct at91_udc_data __initdata kafa_udc_data = {
.pullup_pin = AT91_PIN_PB7,
};
+/*
+ * LEDs
+ */
+static struct gpio_led kafa_leds[] = {
+ { /* D1 */
+ .name = "led1",
+ .gpio = AT91_PIN_PB4,
+ .active_low = 1,
+ .default_trigger = "heartbeat",
+ },
+};
+
static void __init kafa_board_init(void)
{
/* Serial */
@@ -89,6 +98,8 @@ static void __init kafa_board_init(void)
at91_add_device_i2c(NULL, 0);
/* SPI */
at91_add_device_spi(NULL, 0);
+ /* LEDs */
+ at91_gpio_leds(kafa_leds, ARRAY_SIZE(kafa_leds));
}
MACHINE_START(KAFA, "Sperry-Sun KAFA")
diff --git a/arch/arm/mach-at91/board-kb9202.c b/arch/arm/mach-at91/board-kb9202.c
index 9dc8d49..bee2a4e 100644
--- a/arch/arm/mach-at91/board-kb9202.c
+++ b/arch/arm/mach-at91/board-kb9202.c
@@ -50,9 +50,6 @@ static void __init kb9202_init_early(void)
/* Initialize processor: 10 MHz crystal */
at91_initialize(10000000);
- /* Set up the LEDs */
- at91_init_leds(AT91_PIN_PC19, AT91_PIN_PC18);
-
/* DBGU on ttyS0. (Rx & Tx only) */
at91_register_uart(0, 0, 0);
@@ -112,6 +109,24 @@ static struct atmel_nand_data __initdata kb9202_nand_data = {
.partition_info = nand_partitions,
};
+/*
+ * LEDs
+ */
+static struct gpio_led kb9202_leds[] = {
+ { /* D1 */
+ .name = "led1",
+ .gpio = AT91_PIN_PC19,
+ .active_low = 1,
+ .default_trigger = "heartbeat",
+ },
+ { /* D2 */
+ .name = "led2",
+ .gpio = AT91_PIN_PC18,
+ .active_low = 1,
+ .default_trigger = "timer",
+ }
+};
+
static void __init kb9202_board_init(void)
{
/* Serial */
@@ -130,6 +145,8 @@ static void __init kb9202_board_init(void)
at91_add_device_spi(NULL, 0);
/* NAND */
at91_add_device_nand(&kb9202_nand_data);
+ /* LEDs */
+ at91_gpio_leds(kb9202_leds, ARRAY_SIZE(kb9202_leds));
}
MACHINE_START(KB9200, "KB920x")
diff --git a/arch/arm/mach-at91/board-rm9200dk.c b/arch/arm/mach-at91/board-rm9200dk.c
index 6f08faa..8694b74 100644
--- a/arch/arm/mach-at91/board-rm9200dk.c
+++ b/arch/arm/mach-at91/board-rm9200dk.c
@@ -50,9 +50,6 @@ static void __init dk_init_early(void)
/* Initialize processor: 18.432 MHz crystal */
at91_initialize(18432000);
- /* Setup the LEDs */
- at91_init_leds(AT91_PIN_PB2, AT91_PIN_PB2);
-
/* DBGU on ttyS0. (Rx & Tx only) */
at91_register_uart(0, 0, 0);
diff --git a/arch/arm/mach-at91/board-rm9200ek.c b/arch/arm/mach-at91/board-rm9200ek.c
index 85bcccd..3a96ed3 100644
--- a/arch/arm/mach-at91/board-rm9200ek.c
+++ b/arch/arm/mach-at91/board-rm9200ek.c
@@ -50,9 +50,6 @@ static void __init ek_init_early(void)
/* Initialize processor: 18.432 MHz crystal */
at91_initialize(18432000);
- /* Setup the LEDs */
- at91_init_leds(AT91_PIN_PB1, AT91_PIN_PB2);
-
/* DBGU on ttyS0. (Rx & Tx only) */
at91_register_uart(0, 0, 0);
diff --git a/arch/arm/mach-at91/board-sam9-l9260.c b/arch/arm/mach-at91/board-sam9-l9260.c
index 4d3a02f..8c3a15a 100644
--- a/arch/arm/mach-at91/board-sam9-l9260.c
+++ b/arch/arm/mach-at91/board-sam9-l9260.c
@@ -49,9 +49,6 @@ static void __init ek_init_early(void)
/* Initialize processor: 18.432 MHz crystal */
at91_initialize(18432000);
- /* Setup the LEDs */
- at91_init_leds(AT91_PIN_PA9, AT91_PIN_PA6);
-
/* DBGU on ttyS0. (Rx & Tx only) */
at91_register_uart(0, 0, 0);
@@ -184,6 +181,24 @@ static struct at91_mmc_data __initdata ek_mmc_data = {
// .vcc_pin = ... not connected
};
+/*
+ * LEDs
+ */
+static struct gpio_led ek_leds[] = {
+ { /* D1 */
+ .name = "led1",
+ .gpio = AT91_PIN_PA9,
+ .active_low = 1,
+ .default_trigger = "heartbeat",
+ },
+ { /* D2 */
+ .name = "led2",
+ .gpio = AT91_PIN_PA6,
+ .active_low = 1,
+ .default_trigger = "timer",
+ }
+};
+
static void __init ek_board_init(void)
{
/* Serial */
@@ -202,6 +217,8 @@ static void __init ek_board_init(void)
at91_add_device_mmc(0, &ek_mmc_data);
/* I2C */
at91_add_device_i2c(NULL, 0);
+ /* LEDs */
+ at91_gpio_leds(ek_leds, ARRAY_SIZE(ek_leds));
}
MACHINE_START(SAM9_L9260, "Olimex SAM9-L9260")
diff --git a/arch/arm/mach-at91/board-sam9261ek.c b/arch/arm/mach-at91/board-sam9261ek.c
index 5096a0e..4d7b6fa 100644
--- a/arch/arm/mach-at91/board-sam9261ek.c
+++ b/arch/arm/mach-at91/board-sam9261ek.c
@@ -59,9 +59,6 @@ static void __init ek_init_early(void)
/* Initialize processor: 18.432 MHz crystal */
at91_initialize(18432000);
- /* Setup the LEDs */
- at91_init_leds(AT91_PIN_PA13, AT91_PIN_PA14);
-
/* DBGU on ttyS0. (Rx & Tx only) */
at91_register_uart(0, 0, 0);
diff --git a/arch/arm/mach-at91/board-yl-9200.c b/arch/arm/mach-at91/board-yl-9200.c
index 95edcbd..9ac5c47 100644
--- a/arch/arm/mach-at91/board-yl-9200.c
+++ b/arch/arm/mach-at91/board-yl-9200.c
@@ -58,9 +58,6 @@ static void __init yl9200_init_early(void)
/* Initialize processor: 18.432 MHz crystal */
at91_initialize(18432000);
- /* Setup the LEDs D2=PB17 (timer), D3=PB16 (cpu) */
- at91_init_leds(AT91_PIN_PB16, AT91_PIN_PB17);
-
/* DBGU on ttyS0. (Rx & Tx only) */
at91_register_uart(0, 0, 0);
diff --git a/arch/arm/mach-at91/include/mach/board.h b/arch/arm/mach-at91/include/mach/board.h
index ed544a0..c2a7746 100644
--- a/arch/arm/mach-at91/include/mach/board.h
+++ b/arch/arm/mach-at91/include/mach/board.h
@@ -200,7 +200,6 @@ struct at91_can_data {
extern void __init at91_add_device_can(struct at91_can_data *data);
/* LEDs */
-extern void __init at91_init_leds(u8 cpu_led, u8 timer_led);
extern void __init at91_gpio_leds(struct gpio_led *leds, int nr);
extern void __init at91_pwm_leds(struct gpio_led *leds, int nr);
diff --git a/arch/arm/mach-at91/leds.c b/arch/arm/mach-at91/leds.c
index 0415a839..844aef8 100644
--- a/arch/arm/mach-at91/leds.c
+++ b/arch/arm/mach-at91/leds.c
@@ -90,108 +90,3 @@ void __init at91_pwm_leds(struct gpio_led *leds, int nr)
#else
void __init at91_pwm_leds(struct gpio_led *leds, int nr){}
#endif
-
-
-/* ------------------------------------------------------------------------- */
-
-#if defined(CONFIG_LEDS)
-
-#include <asm/leds.h>
-
-/*
- * Old ARM-specific LED framework; not fully functional when generic time is
- * in use.
- */
-
-static u8 at91_leds_cpu;
-static u8 at91_leds_timer;
-
-static inline void at91_led_on(unsigned int led)
-{
- at91_set_gpio_value(led, 0);
-}
-
-static inline void at91_led_off(unsigned int led)
-{
- at91_set_gpio_value(led, 1);
-}
-
-static inline void at91_led_toggle(unsigned int led)
-{
- unsigned long is_off = at91_get_gpio_value(led);
- if (is_off)
- at91_led_on(led);
- else
- at91_led_off(led);
-}
-
-
-/*
- * Handle LED events.
- */
-static void at91_leds_event(led_event_t evt)
-{
- unsigned long flags;
-
- local_irq_save(flags);
-
- switch(evt) {
- case led_start: /* System startup */
- at91_led_on(at91_leds_cpu);
- break;
-
- case led_stop: /* System stop / suspend */
- at91_led_off(at91_leds_cpu);
- break;
-
-#ifdef CONFIG_LEDS_TIMER
- case led_timer: /* Every 50 timer ticks */
- at91_led_toggle(at91_leds_timer);
- break;
-#endif
-
-#ifdef CONFIG_LEDS_CPU
- case led_idle_start: /* Entering idle state */
- at91_led_off(at91_leds_cpu);
- break;
-
- case led_idle_end: /* Exit idle state */
- at91_led_on(at91_leds_cpu);
- break;
-#endif
-
- default:
- break;
- }
-
- local_irq_restore(flags);
-}
-
-
-static int __init leds_init(void)
-{
- if (!at91_leds_timer || !at91_leds_cpu)
- return -ENODEV;
-
- leds_event = at91_leds_event;
-
- leds_event(led_start);
- return 0;
-}
-
-__initcall(leds_init);
-
-
-void __init at91_init_leds(u8 cpu_led, u8 timer_led)
-{
- /* Enable GPIO to access the LEDs */
- at91_set_gpio_output(cpu_led, 1);
- at91_set_gpio_output(timer_led, 1);
-
- at91_leds_cpu = cpu_led;
- at91_leds_timer = timer_led;
-}
-
-#else
-void __init at91_init_leds(u8 cpu_led, u8 timer_led) {}
-#endif
--
1.7.5
^ permalink raw reply related [flat|nested] 49+ messages in thread
* [PATCH 03/18] arm: at91: convert old leds drivers to gpio_led and led_trigger drivers
@ 2011-08-26 9:03 ` Bryan Wu
0 siblings, 0 replies; 49+ messages in thread
From: Bryan Wu @ 2011-08-26 9:03 UTC (permalink / raw)
To: linux-arm-kernel
Build with at91 defconfigs successfully
Signed-off-by: Bryan Wu <bryan.wu@canonical.com>
Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Acked-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
---
arch/arm/mach-at91/board-cap9adk.c | 21 ++++++-
arch/arm/mach-at91/board-csb337.c | 3 -
arch/arm/mach-at91/board-ecbat91.c | 18 +++++-
arch/arm/mach-at91/board-eco920.c | 23 ++++++-
arch/arm/mach-at91/board-kafa.c | 17 ++++-
arch/arm/mach-at91/board-kb9202.c | 23 ++++++-
arch/arm/mach-at91/board-rm9200dk.c | 3 -
arch/arm/mach-at91/board-rm9200ek.c | 3 -
arch/arm/mach-at91/board-sam9-l9260.c | 23 ++++++-
arch/arm/mach-at91/board-sam9261ek.c | 3 -
arch/arm/mach-at91/board-yl-9200.c | 3 -
arch/arm/mach-at91/include/mach/board.h | 1 -
arch/arm/mach-at91/leds.c | 105 -------------------------------
13 files changed, 108 insertions(+), 138 deletions(-)
diff --git a/arch/arm/mach-at91/board-cap9adk.c b/arch/arm/mach-at91/board-cap9adk.c
index 679b0b7..0f95be9 100644
--- a/arch/arm/mach-at91/board-cap9adk.c
+++ b/arch/arm/mach-at91/board-cap9adk.c
@@ -55,8 +55,6 @@ static void __init cap9adk_init_early(void)
/* Initialize processor: 12 MHz crystal */
at91_initialize(12000000);
- /* Setup the LEDs: USER1 and USER2 LED for cpu/timer... */
- at91_init_leds(AT91_PIN_PA10, AT91_PIN_PA11);
/* ... POWER LED always on */
at91_set_gpio_output(AT91_PIN_PC29, 1);
@@ -359,6 +357,23 @@ static struct ac97c_platform_data cap9adk_ac97_data = {
// .reset_pin = ... not connected
};
+/*
+ * LEDs
+ */
+static struct gpio_led cap9adk_leds[] = {
+ { /* D1 */
+ .name = "led1",
+ .gpio = AT91_PIN_PA10,
+ .active_low = 1,
+ .default_trigger = "heartbeat",
+ },
+ { /* D2 */
+ .name = "led2",
+ .gpio = AT91_PIN_PA11,
+ .active_low = 1,
+ .default_trigger = "timer",
+ }
+};
static void __init cap9adk_board_init(void)
{
@@ -386,6 +401,8 @@ static void __init cap9adk_board_init(void)
at91_add_device_lcdc(&cap9adk_lcdc_data);
/* AC97 */
at91_add_device_ac97(&cap9adk_ac97_data);
+ /* LEDs */
+ at91_gpio_leds(cap9adk_leds, ARRAY_SIZE(cap9adk_leds));
}
MACHINE_START(AT91CAP9ADK, "Atmel AT91CAP9A-DK")
diff --git a/arch/arm/mach-at91/board-csb337.c b/arch/arm/mach-at91/board-csb337.c
index 17654d5..0b2cdee 100644
--- a/arch/arm/mach-at91/board-csb337.c
+++ b/arch/arm/mach-at91/board-csb337.c
@@ -48,9 +48,6 @@ static void __init csb337_init_early(void)
/* Initialize processor: 3.6864 MHz crystal */
at91_initialize(3686400);
- /* Setup the LEDs */
- at91_init_leds(AT91_PIN_PB0, AT91_PIN_PB1);
-
/* DBGU on ttyS0 */
at91_register_uart(0, 0, 0);
diff --git a/arch/arm/mach-at91/board-ecbat91.c b/arch/arm/mach-at91/board-ecbat91.c
index 7c0313c..15cbbe4 100644
--- a/arch/arm/mach-at91/board-ecbat91.c
+++ b/arch/arm/mach-at91/board-ecbat91.c
@@ -51,9 +51,6 @@ static void __init ecb_at91init_early(void)
/* Initialize processor: 18.432 MHz crystal */
at91_initialize(18432000);
- /* Setup the LEDs */
- at91_init_leds(AT91_PIN_PC7, AT91_PIN_PC7);
-
/* DBGU on ttyS0. (Rx & Tx only) */
at91_register_uart(0, 0, 0);
@@ -144,6 +141,18 @@ static struct spi_board_info __initdata ecb_at91spi_devices[] = {
},
};
+/*
+ * LEDs
+ */
+static struct gpio_led ecb_leds[] = {
+ { /* D1 */
+ .name = "led1",
+ .gpio = AT91_PIN_PC7,
+ .active_low = 1,
+ .default_trigger = "heartbeat",
+ }
+};
+
static void __init ecb_at91board_init(void)
{
/* Serial */
@@ -163,6 +172,9 @@ static void __init ecb_at91board_init(void)
/* SPI */
at91_add_device_spi(ecb_at91spi_devices, ARRAY_SIZE(ecb_at91spi_devices));
+
+ /* LEDs */
+ at91_gpio_leds(ecb_leds, ARRAY_SIZE(ecb_leds));
}
MACHINE_START(ECBAT91, "emQbit's ECB_AT91")
diff --git a/arch/arm/mach-at91/board-eco920.c b/arch/arm/mach-at91/board-eco920.c
index 8252c72..efa8e55 100644
--- a/arch/arm/mach-at91/board-eco920.c
+++ b/arch/arm/mach-at91/board-eco920.c
@@ -37,9 +37,6 @@ static void __init eco920_init_early(void)
at91_initialize(18432000);
- /* Setup the LEDs */
- at91_init_leds(AT91_PIN_PB0, AT91_PIN_PB1);
-
/* DBGU on ttyS0. (Rx & Tx only */
at91_register_uart(0, 0, 0);
@@ -95,6 +92,24 @@ static struct spi_board_info eco920_spi_devices[] = {
},
};
+/*
+ * LEDs
+ */
+static struct gpio_led eco920_leds[] = {
+ { /* D1 */
+ .name = "led1",
+ .gpio = AT91_PIN_PB0,
+ .active_low = 1,
+ .default_trigger = "heartbeat",
+ },
+ { /* D2 */
+ .name = "led2",
+ .gpio = AT91_PIN_PB1,
+ .active_low = 1,
+ .default_trigger = "timer",
+ }
+};
+
static void __init eco920_board_init(void)
{
at91_add_device_serial();
@@ -125,6 +140,8 @@ static void __init eco920_board_init(void)
);
at91_add_device_spi(eco920_spi_devices, ARRAY_SIZE(eco920_spi_devices));
+ /* LEDs */
+ at91_gpio_leds(eco920_leds, ARRAY_SIZE(eco920_leds));
}
MACHINE_START(ECO920, "eco920")
diff --git a/arch/arm/mach-at91/board-kafa.c b/arch/arm/mach-at91/board-kafa.c
index 4a17089..17a470b 100644
--- a/arch/arm/mach-at91/board-kafa.c
+++ b/arch/arm/mach-at91/board-kafa.c
@@ -48,9 +48,6 @@ static void __init kafa_init_early(void)
/* Initialize processor: 18.432 MHz crystal */
at91_initialize(18432000);
- /* Set up the LEDs */
- at91_init_leds(AT91_PIN_PB4, AT91_PIN_PB4);
-
/* DBGU on ttyS0. (Rx & Tx only) */
at91_register_uart(0, 0, 0);
@@ -75,6 +72,18 @@ static struct at91_udc_data __initdata kafa_udc_data = {
.pullup_pin = AT91_PIN_PB7,
};
+/*
+ * LEDs
+ */
+static struct gpio_led kafa_leds[] = {
+ { /* D1 */
+ .name = "led1",
+ .gpio = AT91_PIN_PB4,
+ .active_low = 1,
+ .default_trigger = "heartbeat",
+ },
+};
+
static void __init kafa_board_init(void)
{
/* Serial */
@@ -89,6 +98,8 @@ static void __init kafa_board_init(void)
at91_add_device_i2c(NULL, 0);
/* SPI */
at91_add_device_spi(NULL, 0);
+ /* LEDs */
+ at91_gpio_leds(kafa_leds, ARRAY_SIZE(kafa_leds));
}
MACHINE_START(KAFA, "Sperry-Sun KAFA")
diff --git a/arch/arm/mach-at91/board-kb9202.c b/arch/arm/mach-at91/board-kb9202.c
index 9dc8d49..bee2a4e 100644
--- a/arch/arm/mach-at91/board-kb9202.c
+++ b/arch/arm/mach-at91/board-kb9202.c
@@ -50,9 +50,6 @@ static void __init kb9202_init_early(void)
/* Initialize processor: 10 MHz crystal */
at91_initialize(10000000);
- /* Set up the LEDs */
- at91_init_leds(AT91_PIN_PC19, AT91_PIN_PC18);
-
/* DBGU on ttyS0. (Rx & Tx only) */
at91_register_uart(0, 0, 0);
@@ -112,6 +109,24 @@ static struct atmel_nand_data __initdata kb9202_nand_data = {
.partition_info = nand_partitions,
};
+/*
+ * LEDs
+ */
+static struct gpio_led kb9202_leds[] = {
+ { /* D1 */
+ .name = "led1",
+ .gpio = AT91_PIN_PC19,
+ .active_low = 1,
+ .default_trigger = "heartbeat",
+ },
+ { /* D2 */
+ .name = "led2",
+ .gpio = AT91_PIN_PC18,
+ .active_low = 1,
+ .default_trigger = "timer",
+ }
+};
+
static void __init kb9202_board_init(void)
{
/* Serial */
@@ -130,6 +145,8 @@ static void __init kb9202_board_init(void)
at91_add_device_spi(NULL, 0);
/* NAND */
at91_add_device_nand(&kb9202_nand_data);
+ /* LEDs */
+ at91_gpio_leds(kb9202_leds, ARRAY_SIZE(kb9202_leds));
}
MACHINE_START(KB9200, "KB920x")
diff --git a/arch/arm/mach-at91/board-rm9200dk.c b/arch/arm/mach-at91/board-rm9200dk.c
index 6f08faa..8694b74 100644
--- a/arch/arm/mach-at91/board-rm9200dk.c
+++ b/arch/arm/mach-at91/board-rm9200dk.c
@@ -50,9 +50,6 @@ static void __init dk_init_early(void)
/* Initialize processor: 18.432 MHz crystal */
at91_initialize(18432000);
- /* Setup the LEDs */
- at91_init_leds(AT91_PIN_PB2, AT91_PIN_PB2);
-
/* DBGU on ttyS0. (Rx & Tx only) */
at91_register_uart(0, 0, 0);
diff --git a/arch/arm/mach-at91/board-rm9200ek.c b/arch/arm/mach-at91/board-rm9200ek.c
index 85bcccd..3a96ed3 100644
--- a/arch/arm/mach-at91/board-rm9200ek.c
+++ b/arch/arm/mach-at91/board-rm9200ek.c
@@ -50,9 +50,6 @@ static void __init ek_init_early(void)
/* Initialize processor: 18.432 MHz crystal */
at91_initialize(18432000);
- /* Setup the LEDs */
- at91_init_leds(AT91_PIN_PB1, AT91_PIN_PB2);
-
/* DBGU on ttyS0. (Rx & Tx only) */
at91_register_uart(0, 0, 0);
diff --git a/arch/arm/mach-at91/board-sam9-l9260.c b/arch/arm/mach-at91/board-sam9-l9260.c
index 4d3a02f..8c3a15a 100644
--- a/arch/arm/mach-at91/board-sam9-l9260.c
+++ b/arch/arm/mach-at91/board-sam9-l9260.c
@@ -49,9 +49,6 @@ static void __init ek_init_early(void)
/* Initialize processor: 18.432 MHz crystal */
at91_initialize(18432000);
- /* Setup the LEDs */
- at91_init_leds(AT91_PIN_PA9, AT91_PIN_PA6);
-
/* DBGU on ttyS0. (Rx & Tx only) */
at91_register_uart(0, 0, 0);
@@ -184,6 +181,24 @@ static struct at91_mmc_data __initdata ek_mmc_data = {
// .vcc_pin = ... not connected
};
+/*
+ * LEDs
+ */
+static struct gpio_led ek_leds[] = {
+ { /* D1 */
+ .name = "led1",
+ .gpio = AT91_PIN_PA9,
+ .active_low = 1,
+ .default_trigger = "heartbeat",
+ },
+ { /* D2 */
+ .name = "led2",
+ .gpio = AT91_PIN_PA6,
+ .active_low = 1,
+ .default_trigger = "timer",
+ }
+};
+
static void __init ek_board_init(void)
{
/* Serial */
@@ -202,6 +217,8 @@ static void __init ek_board_init(void)
at91_add_device_mmc(0, &ek_mmc_data);
/* I2C */
at91_add_device_i2c(NULL, 0);
+ /* LEDs */
+ at91_gpio_leds(ek_leds, ARRAY_SIZE(ek_leds));
}
MACHINE_START(SAM9_L9260, "Olimex SAM9-L9260")
diff --git a/arch/arm/mach-at91/board-sam9261ek.c b/arch/arm/mach-at91/board-sam9261ek.c
index 5096a0e..4d7b6fa 100644
--- a/arch/arm/mach-at91/board-sam9261ek.c
+++ b/arch/arm/mach-at91/board-sam9261ek.c
@@ -59,9 +59,6 @@ static void __init ek_init_early(void)
/* Initialize processor: 18.432 MHz crystal */
at91_initialize(18432000);
- /* Setup the LEDs */
- at91_init_leds(AT91_PIN_PA13, AT91_PIN_PA14);
-
/* DBGU on ttyS0. (Rx & Tx only) */
at91_register_uart(0, 0, 0);
diff --git a/arch/arm/mach-at91/board-yl-9200.c b/arch/arm/mach-at91/board-yl-9200.c
index 95edcbd..9ac5c47 100644
--- a/arch/arm/mach-at91/board-yl-9200.c
+++ b/arch/arm/mach-at91/board-yl-9200.c
@@ -58,9 +58,6 @@ static void __init yl9200_init_early(void)
/* Initialize processor: 18.432 MHz crystal */
at91_initialize(18432000);
- /* Setup the LEDs D2=PB17 (timer), D3=PB16 (cpu) */
- at91_init_leds(AT91_PIN_PB16, AT91_PIN_PB17);
-
/* DBGU on ttyS0. (Rx & Tx only) */
at91_register_uart(0, 0, 0);
diff --git a/arch/arm/mach-at91/include/mach/board.h b/arch/arm/mach-at91/include/mach/board.h
index ed544a0..c2a7746 100644
--- a/arch/arm/mach-at91/include/mach/board.h
+++ b/arch/arm/mach-at91/include/mach/board.h
@@ -200,7 +200,6 @@ struct at91_can_data {
extern void __init at91_add_device_can(struct at91_can_data *data);
/* LEDs */
-extern void __init at91_init_leds(u8 cpu_led, u8 timer_led);
extern void __init at91_gpio_leds(struct gpio_led *leds, int nr);
extern void __init at91_pwm_leds(struct gpio_led *leds, int nr);
diff --git a/arch/arm/mach-at91/leds.c b/arch/arm/mach-at91/leds.c
index 0415a839..844aef8 100644
--- a/arch/arm/mach-at91/leds.c
+++ b/arch/arm/mach-at91/leds.c
@@ -90,108 +90,3 @@ void __init at91_pwm_leds(struct gpio_led *leds, int nr)
#else
void __init at91_pwm_leds(struct gpio_led *leds, int nr){}
#endif
-
-
-/* ------------------------------------------------------------------------- */
-
-#if defined(CONFIG_LEDS)
-
-#include <asm/leds.h>
-
-/*
- * Old ARM-specific LED framework; not fully functional when generic time is
- * in use.
- */
-
-static u8 at91_leds_cpu;
-static u8 at91_leds_timer;
-
-static inline void at91_led_on(unsigned int led)
-{
- at91_set_gpio_value(led, 0);
-}
-
-static inline void at91_led_off(unsigned int led)
-{
- at91_set_gpio_value(led, 1);
-}
-
-static inline void at91_led_toggle(unsigned int led)
-{
- unsigned long is_off = at91_get_gpio_value(led);
- if (is_off)
- at91_led_on(led);
- else
- at91_led_off(led);
-}
-
-
-/*
- * Handle LED events.
- */
-static void at91_leds_event(led_event_t evt)
-{
- unsigned long flags;
-
- local_irq_save(flags);
-
- switch(evt) {
- case led_start: /* System startup */
- at91_led_on(at91_leds_cpu);
- break;
-
- case led_stop: /* System stop / suspend */
- at91_led_off(at91_leds_cpu);
- break;
-
-#ifdef CONFIG_LEDS_TIMER
- case led_timer: /* Every 50 timer ticks */
- at91_led_toggle(at91_leds_timer);
- break;
-#endif
-
-#ifdef CONFIG_LEDS_CPU
- case led_idle_start: /* Entering idle state */
- at91_led_off(at91_leds_cpu);
- break;
-
- case led_idle_end: /* Exit idle state */
- at91_led_on(at91_leds_cpu);
- break;
-#endif
-
- default:
- break;
- }
-
- local_irq_restore(flags);
-}
-
-
-static int __init leds_init(void)
-{
- if (!at91_leds_timer || !at91_leds_cpu)
- return -ENODEV;
-
- leds_event = at91_leds_event;
-
- leds_event(led_start);
- return 0;
-}
-
-__initcall(leds_init);
-
-
-void __init at91_init_leds(u8 cpu_led, u8 timer_led)
-{
- /* Enable GPIO to access the LEDs */
- at91_set_gpio_output(cpu_led, 1);
- at91_set_gpio_output(timer_led, 1);
-
- at91_leds_cpu = cpu_led;
- at91_leds_timer = timer_led;
-}
-
-#else
-void __init at91_init_leds(u8 cpu_led, u8 timer_led) {}
-#endif
--
1.7.5
^ permalink raw reply related [flat|nested] 49+ messages in thread
* [PATCH 04/18] mach-realview and mach-versatile: retire custom LED code
2011-08-26 9:03 ` Bryan Wu
@ 2011-08-26 9:03 ` Bryan Wu
-1 siblings, 0 replies; 49+ messages in thread
From: Bryan Wu @ 2011-08-26 9:03 UTC (permalink / raw)
To: linux, linus.walleij, rpurdie, tony, jochen, linux,
nicolas.pitre, arnd, linux-arm-kernel, jamie, linux-kernel
From: Linus Walleij <linus.walleij@linaro.org>
This replaces the custom LED trigger code in mach-realview with
some overarching platform code for the plat-versatile family that
will lock down LEDs 2 thru 5 for CPU activity indication. The
day we have 8 core ARM systems the plat-versatile code will have
to become more elaborate.
Tested on RealView PB11MPCore by invoking four different CPU
hogs (yes > /dev/null&) and see the LEDs go on one at a time.
They all go off as the hogs are killed. Tested on the PB1176
as well - just one activity led (led 2) goes on and off with
CPU activity.
(bryan.wu@canonical.com: use ledtrig-cpu instead of ledtrig-arm-cpu)
Cc: Richard Purdie <rpurdie@rpsys.net>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Bryan Wu <bryan.wu@canonical.com>
Acked-by: Pawel Moll <pawel.moll@arm.com>
---
arch/arm/mach-realview/core.c | 39 ---------------------------
arch/arm/mach-realview/core.h | 2 -
arch/arm/mach-realview/realview_eb.c | 4 ---
arch/arm/mach-realview/realview_pb1176.c | 4 ---
arch/arm/mach-realview/realview_pb11mp.c | 4 ---
arch/arm/mach-realview/realview_pba8.c | 4 ---
arch/arm/mach-realview/realview_pbx.c | 4 ---
arch/arm/mach-versatile/core.c | 42 ------------------------------
arch/arm/plat-versatile/Kconfig | 2 +-
arch/arm/plat-versatile/leds.c | 13 ++++++---
10 files changed, 10 insertions(+), 108 deletions(-)
diff --git a/arch/arm/mach-realview/core.c b/arch/arm/mach-realview/core.c
index 5c23450..3a12b6b 100644
--- a/arch/arm/mach-realview/core.c
+++ b/arch/arm/mach-realview/core.c
@@ -36,7 +36,6 @@
#include <asm/system.h>
#include <mach/hardware.h>
#include <asm/irq.h>
-#include <asm/leds.h>
#include <asm/mach-types.h>
#include <asm/hardware/arm_timer.h>
#include <asm/hardware/icst.h>
@@ -437,44 +436,6 @@ struct clcd_board clcd_plat_data = {
.remove = versatile_clcd_remove_dma,
};
-#ifdef CONFIG_LEDS
-#define VA_LEDS_BASE (__io_address(REALVIEW_SYS_BASE) + REALVIEW_SYS_LED_OFFSET)
-
-void realview_leds_event(led_event_t ledevt)
-{
- unsigned long flags;
- u32 val;
- u32 led = 1 << smp_processor_id();
-
- local_irq_save(flags);
- val = readl(VA_LEDS_BASE);
-
- switch (ledevt) {
- case led_idle_start:
- val = val & ~led;
- break;
-
- case led_idle_end:
- val = val | led;
- break;
-
- case led_timer:
- val = val ^ REALVIEW_SYS_LED7;
- break;
-
- case led_halted:
- val = 0;
- break;
-
- default:
- break;
- }
-
- writel(val, VA_LEDS_BASE);
- local_irq_restore(flags);
-}
-#endif /* CONFIG_LEDS */
-
/*
* Where is the timer (VA)?
*/
diff --git a/arch/arm/mach-realview/core.h b/arch/arm/mach-realview/core.h
index 5c83d1e..47ee3bc 100644
--- a/arch/arm/mach-realview/core.h
+++ b/arch/arm/mach-realview/core.h
@@ -26,7 +26,6 @@
#include <linux/io.h>
#include <asm/setup.h>
-#include <asm/leds.h>
#define AMBA_DEVICE(name,busid,base,plat) \
static struct amba_device name##_device = { \
@@ -57,7 +56,6 @@ extern void __iomem *timer1_va_base;
extern void __iomem *timer2_va_base;
extern void __iomem *timer3_va_base;
-extern void realview_leds_event(led_event_t ledevt);
extern void realview_timer_init(unsigned int timer_irq);
extern int realview_flash_register(struct resource *res, u32 num);
extern int realview_eth_register(const char *name, struct resource *res);
diff --git a/arch/arm/mach-realview/realview_eb.c b/arch/arm/mach-realview/realview_eb.c
index 7a4e3b1..8bdd783 100644
--- a/arch/arm/mach-realview/realview_eb.c
+++ b/arch/arm/mach-realview/realview_eb.c
@@ -30,7 +30,6 @@
#include <mach/hardware.h>
#include <asm/irq.h>
-#include <asm/leds.h>
#include <asm/mach-types.h>
#include <asm/pmu.h>
#include <asm/pgtable.h>
@@ -455,9 +454,6 @@ static void __init realview_eb_init(void)
amba_device_register(d, &iomem_resource);
}
-#ifdef CONFIG_LEDS
- leds_event = realview_leds_event;
-#endif
realview_reset = realview_eb_reset;
}
diff --git a/arch/arm/mach-realview/realview_pb1176.c b/arch/arm/mach-realview/realview_pb1176.c
index ad5671a..72bbe53 100644
--- a/arch/arm/mach-realview/realview_pb1176.c
+++ b/arch/arm/mach-realview/realview_pb1176.c
@@ -30,7 +30,6 @@
#include <mach/hardware.h>
#include <asm/irq.h>
-#include <asm/leds.h>
#include <asm/mach-types.h>
#include <asm/pmu.h>
#include <asm/pgtable.h>
@@ -350,9 +349,6 @@ static void __init realview_pb1176_init(void)
amba_device_register(d, &iomem_resource);
}
-#ifdef CONFIG_LEDS
- leds_event = realview_leds_event;
-#endif
realview_reset = realview_pb1176_reset;
}
diff --git a/arch/arm/mach-realview/realview_pb11mp.c b/arch/arm/mach-realview/realview_pb11mp.c
index b43644b..e6eeffc 100644
--- a/arch/arm/mach-realview/realview_pb11mp.c
+++ b/arch/arm/mach-realview/realview_pb11mp.c
@@ -30,7 +30,6 @@
#include <mach/hardware.h>
#include <asm/irq.h>
-#include <asm/leds.h>
#include <asm/mach-types.h>
#include <asm/pmu.h>
#include <asm/pgtable.h>
@@ -352,9 +351,6 @@ static void __init realview_pb11mp_init(void)
amba_device_register(d, &iomem_resource);
}
-#ifdef CONFIG_LEDS
- leds_event = realview_leds_event;
-#endif
realview_reset = realview_pb11mp_reset;
}
diff --git a/arch/arm/mach-realview/realview_pba8.c b/arch/arm/mach-realview/realview_pba8.c
index 763e8f3..f29c640 100644
--- a/arch/arm/mach-realview/realview_pba8.c
+++ b/arch/arm/mach-realview/realview_pba8.c
@@ -29,7 +29,6 @@
#include <linux/io.h>
#include <asm/irq.h>
-#include <asm/leds.h>
#include <asm/mach-types.h>
#include <asm/pmu.h>
#include <asm/pgtable.h>
@@ -302,9 +301,6 @@ static void __init realview_pba8_init(void)
amba_device_register(d, &iomem_resource);
}
-#ifdef CONFIG_LEDS
- leds_event = realview_leds_event;
-#endif
realview_reset = realview_pba8_reset;
}
diff --git a/arch/arm/mach-realview/realview_pbx.c b/arch/arm/mach-realview/realview_pbx.c
index 363b0ab..61d30fa 100644
--- a/arch/arm/mach-realview/realview_pbx.c
+++ b/arch/arm/mach-realview/realview_pbx.c
@@ -28,7 +28,6 @@
#include <linux/io.h>
#include <asm/irq.h>
-#include <asm/leds.h>
#include <asm/mach-types.h>
#include <asm/pmu.h>
#include <asm/smp_twd.h>
@@ -385,9 +384,6 @@ static void __init realview_pbx_init(void)
amba_device_register(d, &iomem_resource);
}
-#ifdef CONFIG_LEDS
- leds_event = realview_leds_event;
-#endif
realview_reset = realview_pbx_reset;
}
diff --git a/arch/arm/mach-versatile/core.c b/arch/arm/mach-versatile/core.c
index e340a54..24926f5 100644
--- a/arch/arm/mach-versatile/core.c
+++ b/arch/arm/mach-versatile/core.c
@@ -39,7 +39,6 @@
#include <asm/system.h>
#include <asm/irq.h>
-#include <asm/leds.h>
#include <asm/hardware/arm_timer.h>
#include <asm/hardware/icst.h>
#include <asm/hardware/vic.h>
@@ -708,43 +707,6 @@ struct of_dev_auxdata versatile_auxdata_lookup[] __initdata = {
};
#endif
-#ifdef CONFIG_LEDS
-#define VA_LEDS_BASE (__io_address(VERSATILE_SYS_BASE) + VERSATILE_SYS_LED_OFFSET)
-
-static void versatile_leds_event(led_event_t ledevt)
-{
- unsigned long flags;
- u32 val;
-
- local_irq_save(flags);
- val = readl(VA_LEDS_BASE);
-
- switch (ledevt) {
- case led_idle_start:
- val = val & ~VERSATILE_SYS_LED0;
- break;
-
- case led_idle_end:
- val = val | VERSATILE_SYS_LED0;
- break;
-
- case led_timer:
- val = val ^ VERSATILE_SYS_LED1;
- break;
-
- case led_halted:
- val = 0;
- break;
-
- default:
- break;
- }
-
- writel(val, VA_LEDS_BASE);
- local_irq_restore(flags);
-}
-#endif /* CONFIG_LEDS */
-
/* Early initializations */
void __init versatile_init_early(void)
{
@@ -769,10 +731,6 @@ void __init versatile_init(void)
struct amba_device *d = amba_devs[i];
amba_device_register(d, &iomem_resource);
}
-
-#ifdef CONFIG_LEDS
- leds_event = versatile_leds_event;
-#endif
}
/*
diff --git a/arch/arm/plat-versatile/Kconfig b/arch/arm/plat-versatile/Kconfig
index 52353be..bfcea07 100644
--- a/arch/arm/plat-versatile/Kconfig
+++ b/arch/arm/plat-versatile/Kconfig
@@ -7,7 +7,7 @@ config PLAT_VERSATILE_FPGA_IRQ
bool
config PLAT_VERSATILE_LEDS
- def_bool y if LEDS_CLASS
+ def_bool y if NEW_LEDS
depends on ARCH_REALVIEW || ARCH_VERSATILE
config PLAT_VERSATILE_SCHED_CLOCK
diff --git a/arch/arm/plat-versatile/leds.c b/arch/arm/plat-versatile/leds.c
index 3169fa5..50090c4 100644
--- a/arch/arm/plat-versatile/leds.c
+++ b/arch/arm/plat-versatile/leds.c
@@ -37,10 +37,10 @@ static const struct {
} versatile_leds[] = {
{ "versatile:0", "heartbeat", },
{ "versatile:1", "mmc0", },
- { "versatile:2", },
- { "versatile:3", },
- { "versatile:4", },
- { "versatile:5", },
+ { "versatile:2", "cpu0" },
+ { "versatile:3", "cpu1" },
+ { "versatile:4", "cpu2" },
+ { "versatile:5", "cpu3" },
{ "versatile:6", },
{ "versatile:7", },
};
@@ -85,6 +85,11 @@ static int __init versatile_leds_init(void)
led->cdev.brightness_set = versatile_led_set;
led->cdev.brightness_get = versatile_led_get;
led->cdev.default_trigger = versatile_leds[i].trigger;
+ /* Some trigger data for CPU LEDs */
+ if (i >= 2 && i <= 5) {
+ /* This is the CPU number actually */
+ led->cdev.trigger_data = (void *) i - 2;
+ }
led->mask = BIT(i);
if (led_classdev_register(NULL, &led->cdev) < 0) {
--
1.7.5
^ permalink raw reply related [flat|nested] 49+ messages in thread
* [PATCH 04/18] mach-realview and mach-versatile: retire custom LED code
@ 2011-08-26 9:03 ` Bryan Wu
0 siblings, 0 replies; 49+ messages in thread
From: Bryan Wu @ 2011-08-26 9:03 UTC (permalink / raw)
To: linux-arm-kernel
From: Linus Walleij <linus.walleij@linaro.org>
This replaces the custom LED trigger code in mach-realview with
some overarching platform code for the plat-versatile family that
will lock down LEDs 2 thru 5 for CPU activity indication. The
day we have 8 core ARM systems the plat-versatile code will have
to become more elaborate.
Tested on RealView PB11MPCore by invoking four different CPU
hogs (yes > /dev/null&) and see the LEDs go on one at a time.
They all go off as the hogs are killed. Tested on the PB1176
as well - just one activity led (led 2) goes on and off with
CPU activity.
(bryan.wu at canonical.com: use ledtrig-cpu instead of ledtrig-arm-cpu)
Cc: Richard Purdie <rpurdie@rpsys.net>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Bryan Wu <bryan.wu@canonical.com>
Acked-by: Pawel Moll <pawel.moll@arm.com>
---
arch/arm/mach-realview/core.c | 39 ---------------------------
arch/arm/mach-realview/core.h | 2 -
arch/arm/mach-realview/realview_eb.c | 4 ---
arch/arm/mach-realview/realview_pb1176.c | 4 ---
arch/arm/mach-realview/realview_pb11mp.c | 4 ---
arch/arm/mach-realview/realview_pba8.c | 4 ---
arch/arm/mach-realview/realview_pbx.c | 4 ---
arch/arm/mach-versatile/core.c | 42 ------------------------------
arch/arm/plat-versatile/Kconfig | 2 +-
arch/arm/plat-versatile/leds.c | 13 ++++++---
10 files changed, 10 insertions(+), 108 deletions(-)
diff --git a/arch/arm/mach-realview/core.c b/arch/arm/mach-realview/core.c
index 5c23450..3a12b6b 100644
--- a/arch/arm/mach-realview/core.c
+++ b/arch/arm/mach-realview/core.c
@@ -36,7 +36,6 @@
#include <asm/system.h>
#include <mach/hardware.h>
#include <asm/irq.h>
-#include <asm/leds.h>
#include <asm/mach-types.h>
#include <asm/hardware/arm_timer.h>
#include <asm/hardware/icst.h>
@@ -437,44 +436,6 @@ struct clcd_board clcd_plat_data = {
.remove = versatile_clcd_remove_dma,
};
-#ifdef CONFIG_LEDS
-#define VA_LEDS_BASE (__io_address(REALVIEW_SYS_BASE) + REALVIEW_SYS_LED_OFFSET)
-
-void realview_leds_event(led_event_t ledevt)
-{
- unsigned long flags;
- u32 val;
- u32 led = 1 << smp_processor_id();
-
- local_irq_save(flags);
- val = readl(VA_LEDS_BASE);
-
- switch (ledevt) {
- case led_idle_start:
- val = val & ~led;
- break;
-
- case led_idle_end:
- val = val | led;
- break;
-
- case led_timer:
- val = val ^ REALVIEW_SYS_LED7;
- break;
-
- case led_halted:
- val = 0;
- break;
-
- default:
- break;
- }
-
- writel(val, VA_LEDS_BASE);
- local_irq_restore(flags);
-}
-#endif /* CONFIG_LEDS */
-
/*
* Where is the timer (VA)?
*/
diff --git a/arch/arm/mach-realview/core.h b/arch/arm/mach-realview/core.h
index 5c83d1e..47ee3bc 100644
--- a/arch/arm/mach-realview/core.h
+++ b/arch/arm/mach-realview/core.h
@@ -26,7 +26,6 @@
#include <linux/io.h>
#include <asm/setup.h>
-#include <asm/leds.h>
#define AMBA_DEVICE(name,busid,base,plat) \
static struct amba_device name##_device = { \
@@ -57,7 +56,6 @@ extern void __iomem *timer1_va_base;
extern void __iomem *timer2_va_base;
extern void __iomem *timer3_va_base;
-extern void realview_leds_event(led_event_t ledevt);
extern void realview_timer_init(unsigned int timer_irq);
extern int realview_flash_register(struct resource *res, u32 num);
extern int realview_eth_register(const char *name, struct resource *res);
diff --git a/arch/arm/mach-realview/realview_eb.c b/arch/arm/mach-realview/realview_eb.c
index 7a4e3b1..8bdd783 100644
--- a/arch/arm/mach-realview/realview_eb.c
+++ b/arch/arm/mach-realview/realview_eb.c
@@ -30,7 +30,6 @@
#include <mach/hardware.h>
#include <asm/irq.h>
-#include <asm/leds.h>
#include <asm/mach-types.h>
#include <asm/pmu.h>
#include <asm/pgtable.h>
@@ -455,9 +454,6 @@ static void __init realview_eb_init(void)
amba_device_register(d, &iomem_resource);
}
-#ifdef CONFIG_LEDS
- leds_event = realview_leds_event;
-#endif
realview_reset = realview_eb_reset;
}
diff --git a/arch/arm/mach-realview/realview_pb1176.c b/arch/arm/mach-realview/realview_pb1176.c
index ad5671a..72bbe53 100644
--- a/arch/arm/mach-realview/realview_pb1176.c
+++ b/arch/arm/mach-realview/realview_pb1176.c
@@ -30,7 +30,6 @@
#include <mach/hardware.h>
#include <asm/irq.h>
-#include <asm/leds.h>
#include <asm/mach-types.h>
#include <asm/pmu.h>
#include <asm/pgtable.h>
@@ -350,9 +349,6 @@ static void __init realview_pb1176_init(void)
amba_device_register(d, &iomem_resource);
}
-#ifdef CONFIG_LEDS
- leds_event = realview_leds_event;
-#endif
realview_reset = realview_pb1176_reset;
}
diff --git a/arch/arm/mach-realview/realview_pb11mp.c b/arch/arm/mach-realview/realview_pb11mp.c
index b43644b..e6eeffc 100644
--- a/arch/arm/mach-realview/realview_pb11mp.c
+++ b/arch/arm/mach-realview/realview_pb11mp.c
@@ -30,7 +30,6 @@
#include <mach/hardware.h>
#include <asm/irq.h>
-#include <asm/leds.h>
#include <asm/mach-types.h>
#include <asm/pmu.h>
#include <asm/pgtable.h>
@@ -352,9 +351,6 @@ static void __init realview_pb11mp_init(void)
amba_device_register(d, &iomem_resource);
}
-#ifdef CONFIG_LEDS
- leds_event = realview_leds_event;
-#endif
realview_reset = realview_pb11mp_reset;
}
diff --git a/arch/arm/mach-realview/realview_pba8.c b/arch/arm/mach-realview/realview_pba8.c
index 763e8f3..f29c640 100644
--- a/arch/arm/mach-realview/realview_pba8.c
+++ b/arch/arm/mach-realview/realview_pba8.c
@@ -29,7 +29,6 @@
#include <linux/io.h>
#include <asm/irq.h>
-#include <asm/leds.h>
#include <asm/mach-types.h>
#include <asm/pmu.h>
#include <asm/pgtable.h>
@@ -302,9 +301,6 @@ static void __init realview_pba8_init(void)
amba_device_register(d, &iomem_resource);
}
-#ifdef CONFIG_LEDS
- leds_event = realview_leds_event;
-#endif
realview_reset = realview_pba8_reset;
}
diff --git a/arch/arm/mach-realview/realview_pbx.c b/arch/arm/mach-realview/realview_pbx.c
index 363b0ab..61d30fa 100644
--- a/arch/arm/mach-realview/realview_pbx.c
+++ b/arch/arm/mach-realview/realview_pbx.c
@@ -28,7 +28,6 @@
#include <linux/io.h>
#include <asm/irq.h>
-#include <asm/leds.h>
#include <asm/mach-types.h>
#include <asm/pmu.h>
#include <asm/smp_twd.h>
@@ -385,9 +384,6 @@ static void __init realview_pbx_init(void)
amba_device_register(d, &iomem_resource);
}
-#ifdef CONFIG_LEDS
- leds_event = realview_leds_event;
-#endif
realview_reset = realview_pbx_reset;
}
diff --git a/arch/arm/mach-versatile/core.c b/arch/arm/mach-versatile/core.c
index e340a54..24926f5 100644
--- a/arch/arm/mach-versatile/core.c
+++ b/arch/arm/mach-versatile/core.c
@@ -39,7 +39,6 @@
#include <asm/system.h>
#include <asm/irq.h>
-#include <asm/leds.h>
#include <asm/hardware/arm_timer.h>
#include <asm/hardware/icst.h>
#include <asm/hardware/vic.h>
@@ -708,43 +707,6 @@ struct of_dev_auxdata versatile_auxdata_lookup[] __initdata = {
};
#endif
-#ifdef CONFIG_LEDS
-#define VA_LEDS_BASE (__io_address(VERSATILE_SYS_BASE) + VERSATILE_SYS_LED_OFFSET)
-
-static void versatile_leds_event(led_event_t ledevt)
-{
- unsigned long flags;
- u32 val;
-
- local_irq_save(flags);
- val = readl(VA_LEDS_BASE);
-
- switch (ledevt) {
- case led_idle_start:
- val = val & ~VERSATILE_SYS_LED0;
- break;
-
- case led_idle_end:
- val = val | VERSATILE_SYS_LED0;
- break;
-
- case led_timer:
- val = val ^ VERSATILE_SYS_LED1;
- break;
-
- case led_halted:
- val = 0;
- break;
-
- default:
- break;
- }
-
- writel(val, VA_LEDS_BASE);
- local_irq_restore(flags);
-}
-#endif /* CONFIG_LEDS */
-
/* Early initializations */
void __init versatile_init_early(void)
{
@@ -769,10 +731,6 @@ void __init versatile_init(void)
struct amba_device *d = amba_devs[i];
amba_device_register(d, &iomem_resource);
}
-
-#ifdef CONFIG_LEDS
- leds_event = versatile_leds_event;
-#endif
}
/*
diff --git a/arch/arm/plat-versatile/Kconfig b/arch/arm/plat-versatile/Kconfig
index 52353be..bfcea07 100644
--- a/arch/arm/plat-versatile/Kconfig
+++ b/arch/arm/plat-versatile/Kconfig
@@ -7,7 +7,7 @@ config PLAT_VERSATILE_FPGA_IRQ
bool
config PLAT_VERSATILE_LEDS
- def_bool y if LEDS_CLASS
+ def_bool y if NEW_LEDS
depends on ARCH_REALVIEW || ARCH_VERSATILE
config PLAT_VERSATILE_SCHED_CLOCK
diff --git a/arch/arm/plat-versatile/leds.c b/arch/arm/plat-versatile/leds.c
index 3169fa5..50090c4 100644
--- a/arch/arm/plat-versatile/leds.c
+++ b/arch/arm/plat-versatile/leds.c
@@ -37,10 +37,10 @@ static const struct {
} versatile_leds[] = {
{ "versatile:0", "heartbeat", },
{ "versatile:1", "mmc0", },
- { "versatile:2", },
- { "versatile:3", },
- { "versatile:4", },
- { "versatile:5", },
+ { "versatile:2", "cpu0" },
+ { "versatile:3", "cpu1" },
+ { "versatile:4", "cpu2" },
+ { "versatile:5", "cpu3" },
{ "versatile:6", },
{ "versatile:7", },
};
@@ -85,6 +85,11 @@ static int __init versatile_leds_init(void)
led->cdev.brightness_set = versatile_led_set;
led->cdev.brightness_get = versatile_led_get;
led->cdev.default_trigger = versatile_leds[i].trigger;
+ /* Some trigger data for CPU LEDs */
+ if (i >= 2 && i <= 5) {
+ /* This is the CPU number actually */
+ led->cdev.trigger_data = (void *) i - 2;
+ }
led->mask = BIT(i);
if (led_classdev_register(NULL, &led->cdev) < 0) {
--
1.7.5
^ permalink raw reply related [flat|nested] 49+ messages in thread
* [PATCH 05/18] mach-ks8695: remove leds driver, since nobody use it
2011-08-26 9:03 ` Bryan Wu
@ 2011-08-26 9:03 ` Bryan Wu
-1 siblings, 0 replies; 49+ messages in thread
From: Bryan Wu @ 2011-08-26 9:03 UTC (permalink / raw)
To: linux, linus.walleij, rpurdie, tony, jochen, linux,
nicolas.pitre, arnd, linux-arm-kernel, jamie, linux-kernel
Signed-off-by: Bryan Wu <bryan.wu@canonical.com>
Acked-by: Andrew Victor <linux@maxim.org.za>
---
arch/arm/mach-ks8695/Makefile | 3 -
arch/arm/mach-ks8695/devices.c | 21 ------
arch/arm/mach-ks8695/include/mach/devices.h | 5 --
arch/arm/mach-ks8695/leds.c | 93 ---------------------------
4 files changed, 0 insertions(+), 122 deletions(-)
delete mode 100644 arch/arm/mach-ks8695/leds.c
diff --git a/arch/arm/mach-ks8695/Makefile b/arch/arm/mach-ks8695/Makefile
index 7e3e816..39c7d3c 100644
--- a/arch/arm/mach-ks8695/Makefile
+++ b/arch/arm/mach-ks8695/Makefile
@@ -11,9 +11,6 @@ obj- :=
# PCI support is optional
obj-$(CONFIG_PCI) += pci.o
-# LEDs
-obj-$(CONFIG_LEDS) += leds.o
-
# Board-specific support
obj-$(CONFIG_MACH_KS8695) += board-micrel.o
obj-$(CONFIG_MACH_DSM320) += board-dsm320.o
diff --git a/arch/arm/mach-ks8695/devices.c b/arch/arm/mach-ks8695/devices.c
index b89fb6d..5ebf45d 100644
--- a/arch/arm/mach-ks8695/devices.c
+++ b/arch/arm/mach-ks8695/devices.c
@@ -181,27 +181,6 @@ static void __init ks8695_add_device_watchdog(void)
}
-/* --------------------------------------------------------------------
- * LEDs
- * -------------------------------------------------------------------- */
-
-#if defined(CONFIG_LEDS)
-short ks8695_leds_cpu = -1;
-short ks8695_leds_timer = -1;
-
-void __init ks8695_init_leds(u8 cpu_led, u8 timer_led)
-{
- /* Enable GPIO to access the LEDs */
- gpio_direction_output(cpu_led, 1);
- gpio_direction_output(timer_led, 1);
-
- ks8695_leds_cpu = cpu_led;
- ks8695_leds_timer = timer_led;
-}
-#else
-void __init ks8695_init_leds(u8 cpu_led, u8 timer_led) {}
-#endif
-
/* -------------------------------------------------------------------- */
/*
diff --git a/arch/arm/mach-ks8695/include/mach/devices.h b/arch/arm/mach-ks8695/include/mach/devices.h
index 85a3c9a..1e6594a 100644
--- a/arch/arm/mach-ks8695/include/mach/devices.h
+++ b/arch/arm/mach-ks8695/include/mach/devices.h
@@ -18,11 +18,6 @@ extern void __init ks8695_add_device_wan(void);
extern void __init ks8695_add_device_lan(void);
extern void __init ks8695_add_device_hpna(void);
- /* LEDs */
-extern short ks8695_leds_cpu;
-extern short ks8695_leds_timer;
-extern void __init ks8695_init_leds(u8 cpu_led, u8 timer_led);
-
/* PCI */
#define KS8695_MODE_PCI 0
#define KS8695_MODE_MINIPCI 1
diff --git a/arch/arm/mach-ks8695/leds.c b/arch/arm/mach-ks8695/leds.c
deleted file mode 100644
index 184ef74..0000000
--- a/arch/arm/mach-ks8695/leds.c
+++ /dev/null
@@ -1,93 +0,0 @@
-/*
- * LED driver for KS8695-based boards.
- *
- * Copyright (C) Andrew Victor
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <linux/init.h>
-
-#include <asm/leds.h>
-#include <mach/devices.h>
-#include <mach/gpio.h>
-
-
-static inline void ks8695_led_on(unsigned int led)
-{
- gpio_set_value(led, 0);
-}
-
-static inline void ks8695_led_off(unsigned int led)
-{
- gpio_set_value(led, 1);
-}
-
-static inline void ks8695_led_toggle(unsigned int led)
-{
- unsigned long is_off = gpio_get_value(led);
- if (is_off)
- ks8695_led_on(led);
- else
- ks8695_led_off(led);
-}
-
-
-/*
- * Handle LED events.
- */
-static void ks8695_leds_event(led_event_t evt)
-{
- unsigned long flags;
-
- local_irq_save(flags);
-
- switch(evt) {
- case led_start: /* System startup */
- ks8695_led_on(ks8695_leds_cpu);
- break;
-
- case led_stop: /* System stop / suspend */
- ks8695_led_off(ks8695_leds_cpu);
- break;
-
-#ifdef CONFIG_LEDS_TIMER
- case led_timer: /* Every 50 timer ticks */
- ks8695_led_toggle(ks8695_leds_timer);
- break;
-#endif
-
-#ifdef CONFIG_LEDS_CPU
- case led_idle_start: /* Entering idle state */
- ks8695_led_off(ks8695_leds_cpu);
- break;
-
- case led_idle_end: /* Exit idle state */
- ks8695_led_on(ks8695_leds_cpu);
- break;
-#endif
-
- default:
- break;
- }
-
- local_irq_restore(flags);
-}
-
-
-static int __init leds_init(void)
-{
- if ((ks8695_leds_timer == -1) || (ks8695_leds_cpu == -1))
- return -ENODEV;
-
- leds_event = ks8695_leds_event;
-
- leds_event(led_start);
- return 0;
-}
-
-__initcall(leds_init);
--
1.7.5
^ permalink raw reply related [flat|nested] 49+ messages in thread
* [PATCH 05/18] mach-ks8695: remove leds driver, since nobody use it
@ 2011-08-26 9:03 ` Bryan Wu
0 siblings, 0 replies; 49+ messages in thread
From: Bryan Wu @ 2011-08-26 9:03 UTC (permalink / raw)
To: linux-arm-kernel
Signed-off-by: Bryan Wu <bryan.wu@canonical.com>
Acked-by: Andrew Victor <linux@maxim.org.za>
---
arch/arm/mach-ks8695/Makefile | 3 -
arch/arm/mach-ks8695/devices.c | 21 ------
arch/arm/mach-ks8695/include/mach/devices.h | 5 --
arch/arm/mach-ks8695/leds.c | 93 ---------------------------
4 files changed, 0 insertions(+), 122 deletions(-)
delete mode 100644 arch/arm/mach-ks8695/leds.c
diff --git a/arch/arm/mach-ks8695/Makefile b/arch/arm/mach-ks8695/Makefile
index 7e3e816..39c7d3c 100644
--- a/arch/arm/mach-ks8695/Makefile
+++ b/arch/arm/mach-ks8695/Makefile
@@ -11,9 +11,6 @@ obj- :=
# PCI support is optional
obj-$(CONFIG_PCI) += pci.o
-# LEDs
-obj-$(CONFIG_LEDS) += leds.o
-
# Board-specific support
obj-$(CONFIG_MACH_KS8695) += board-micrel.o
obj-$(CONFIG_MACH_DSM320) += board-dsm320.o
diff --git a/arch/arm/mach-ks8695/devices.c b/arch/arm/mach-ks8695/devices.c
index b89fb6d..5ebf45d 100644
--- a/arch/arm/mach-ks8695/devices.c
+++ b/arch/arm/mach-ks8695/devices.c
@@ -181,27 +181,6 @@ static void __init ks8695_add_device_watchdog(void)
}
-/* --------------------------------------------------------------------
- * LEDs
- * -------------------------------------------------------------------- */
-
-#if defined(CONFIG_LEDS)
-short ks8695_leds_cpu = -1;
-short ks8695_leds_timer = -1;
-
-void __init ks8695_init_leds(u8 cpu_led, u8 timer_led)
-{
- /* Enable GPIO to access the LEDs */
- gpio_direction_output(cpu_led, 1);
- gpio_direction_output(timer_led, 1);
-
- ks8695_leds_cpu = cpu_led;
- ks8695_leds_timer = timer_led;
-}
-#else
-void __init ks8695_init_leds(u8 cpu_led, u8 timer_led) {}
-#endif
-
/* -------------------------------------------------------------------- */
/*
diff --git a/arch/arm/mach-ks8695/include/mach/devices.h b/arch/arm/mach-ks8695/include/mach/devices.h
index 85a3c9a..1e6594a 100644
--- a/arch/arm/mach-ks8695/include/mach/devices.h
+++ b/arch/arm/mach-ks8695/include/mach/devices.h
@@ -18,11 +18,6 @@ extern void __init ks8695_add_device_wan(void);
extern void __init ks8695_add_device_lan(void);
extern void __init ks8695_add_device_hpna(void);
- /* LEDs */
-extern short ks8695_leds_cpu;
-extern short ks8695_leds_timer;
-extern void __init ks8695_init_leds(u8 cpu_led, u8 timer_led);
-
/* PCI */
#define KS8695_MODE_PCI 0
#define KS8695_MODE_MINIPCI 1
diff --git a/arch/arm/mach-ks8695/leds.c b/arch/arm/mach-ks8695/leds.c
deleted file mode 100644
index 184ef74..0000000
--- a/arch/arm/mach-ks8695/leds.c
+++ /dev/null
@@ -1,93 +0,0 @@
-/*
- * LED driver for KS8695-based boards.
- *
- * Copyright (C) Andrew Victor
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <linux/init.h>
-
-#include <asm/leds.h>
-#include <mach/devices.h>
-#include <mach/gpio.h>
-
-
-static inline void ks8695_led_on(unsigned int led)
-{
- gpio_set_value(led, 0);
-}
-
-static inline void ks8695_led_off(unsigned int led)
-{
- gpio_set_value(led, 1);
-}
-
-static inline void ks8695_led_toggle(unsigned int led)
-{
- unsigned long is_off = gpio_get_value(led);
- if (is_off)
- ks8695_led_on(led);
- else
- ks8695_led_off(led);
-}
-
-
-/*
- * Handle LED events.
- */
-static void ks8695_leds_event(led_event_t evt)
-{
- unsigned long flags;
-
- local_irq_save(flags);
-
- switch(evt) {
- case led_start: /* System startup */
- ks8695_led_on(ks8695_leds_cpu);
- break;
-
- case led_stop: /* System stop / suspend */
- ks8695_led_off(ks8695_leds_cpu);
- break;
-
-#ifdef CONFIG_LEDS_TIMER
- case led_timer: /* Every 50 timer ticks */
- ks8695_led_toggle(ks8695_leds_timer);
- break;
-#endif
-
-#ifdef CONFIG_LEDS_CPU
- case led_idle_start: /* Entering idle state */
- ks8695_led_off(ks8695_leds_cpu);
- break;
-
- case led_idle_end: /* Exit idle state */
- ks8695_led_on(ks8695_leds_cpu);
- break;
-#endif
-
- default:
- break;
- }
-
- local_irq_restore(flags);
-}
-
-
-static int __init leds_init(void)
-{
- if ((ks8695_leds_timer == -1) || (ks8695_leds_cpu == -1))
- return -ENODEV;
-
- leds_event = ks8695_leds_event;
-
- leds_event(led_start);
- return 0;
-}
-
-__initcall(leds_init);
--
1.7.5
^ permalink raw reply related [flat|nested] 49+ messages in thread
* [PATCH 06/18] mach-shark: retire custom LED code
2011-08-26 9:03 ` Bryan Wu
@ 2011-08-26 9:03 ` Bryan Wu
-1 siblings, 0 replies; 49+ messages in thread
From: Bryan Wu @ 2011-08-26 9:03 UTC (permalink / raw)
To: linux, linus.walleij, rpurdie, tony, jochen, linux,
nicolas.pitre, arnd, linux-arm-kernel, jamie, linux-kernel
The CPU activity LED is now handled by the trigger in the leds
subsystem, retire this old CONFIG_LEDS-based code.
Signed-off-by: Bryan Wu <bryan.wu@canonical.com>
---
arch/arm/mach-shark/Makefile | 4 +-
arch/arm/mach-shark/core.c | 1 -
arch/arm/mach-shark/leds.c | 227 ++++++++++++++++--------------------------
3 files changed, 89 insertions(+), 143 deletions(-)
diff --git a/arch/arm/mach-shark/Makefile b/arch/arm/mach-shark/Makefile
index 45be9b0..2965718 100644
--- a/arch/arm/mach-shark/Makefile
+++ b/arch/arm/mach-shark/Makefile
@@ -4,9 +4,7 @@
# Object file lists.
-obj-y := core.o dma.o irq.o pci.o
+obj-y := core.o dma.o irq.o pci.o leds.o
obj-m :=
obj-n :=
obj- :=
-
-obj-$(CONFIG_LEDS) += leds.o
diff --git a/arch/arm/mach-shark/core.c b/arch/arm/mach-shark/core.c
index ac2873c..36b6b87 100644
--- a/arch/arm/mach-shark/core.c
+++ b/arch/arm/mach-shark/core.c
@@ -13,7 +13,6 @@
#include <asm/setup.h>
#include <asm/mach-types.h>
-#include <asm/leds.h>
#include <asm/param.h>
#include <asm/mach/map.h>
diff --git a/arch/arm/mach-shark/leds.c b/arch/arm/mach-shark/leds.c
index c9e32de..55433b0 100644
--- a/arch/arm/mach-shark/leds.c
+++ b/arch/arm/mach-shark/leds.c
@@ -1,166 +1,115 @@
/*
- * arch/arm/mach-shark/leds.c
- * by Alexander Schulz
- *
- * derived from:
- * arch/arm/kernel/leds-footbridge.c
- * Copyright (C) 1998-1999 Russell King
- *
* DIGITAL Shark LED control routines.
*
- * The leds use is as follows:
- * - Green front - toggles state every 50 timer interrupts
- * - Amber front - Unused, this is a dual color led (Amber/Green)
- * - Amber back - On if system is not idle
+ * Driver for the 3 user LEDs found on the Shark
+ * Based on Versatile and RealView machine LED code
*
- * Changelog:
+ * License terms: GNU General Public License (GPL) version 2
+ * Author: Bryan Wu <bryan.wu@canonical.com>
*/
#include <linux/kernel.h>
-#include <linux/module.h>
#include <linux/init.h>
-#include <linux/spinlock.h>
-#include <linux/ioport.h>
#include <linux/io.h>
+#include <linux/ioport.h>
+#include <linux/slab.h>
+#include <linux/leds.h>
-#include <asm/leds.h>
-#include <asm/system.h>
+#include <asm/mach-types.h>
-#define LED_STATE_ENABLED 1
-#define LED_STATE_CLAIMED 2
+struct shark_led {
+ struct led_classdev cdev;
+ u8 mask;
+};
-#define SEQUOIA_LED_GREEN (1<<6)
-#define SEQUOIA_LED_AMBER (1<<5)
-#define SEQUOIA_LED_BACK (1<<7)
+/*
+ * The triggers lines up below will only be used if the
+ * LED triggers are compiled in.
+ */
+static const struct {
+ const char *name;
+ const char *trigger;
+} shark_leds[] = {
+ { "shark:amber0", "default-on", }, /* Bit 5 */
+ { "shark:green", "heartbeat", }, /* Bit 6 */
+ { "shark:amber1", "cpu0" }, /* Bit 7 */
+};
+
+static u16 led_reg_read(void)
+{
+ outw(0x09, 0x24);
+ return inw(0x26);
+}
-static char led_state;
-static short hw_led_state;
-static short saved_state;
+static void led_reg_write(u16 value)
+{
+ outw(0x09, 0x24);
+ outw(value, 0x26);
+}
-static DEFINE_SPINLOCK(leds_lock);
+static void shark_led_set(struct led_classdev *cdev,
+ enum led_brightness b)
+{
+ struct shark_led *led = container_of(cdev,
+ struct shark_led, cdev);
+ u16 reg = led_reg_read();
-short sequoia_read(int addr) {
- outw(addr,0x24);
- return inw(0x26);
-}
+ if (b != LED_OFF)
+ reg |= led->mask;
+ else
+ reg &= ~led->mask;
-void sequoia_write(short value,short addr) {
- outw(addr,0x24);
- outw(value,0x26);
+ led_reg_write(reg);
}
-static void sequoia_leds_event(led_event_t evt)
+static enum led_brightness shark_led_get(struct led_classdev *cdev)
{
- unsigned long flags;
-
- spin_lock_irqsave(&leds_lock, flags);
-
- hw_led_state = sequoia_read(0x09);
-
- switch (evt) {
- case led_start:
- hw_led_state |= SEQUOIA_LED_GREEN;
- hw_led_state |= SEQUOIA_LED_AMBER;
-#ifdef CONFIG_LEDS_CPU
- hw_led_state |= SEQUOIA_LED_BACK;
-#else
- hw_led_state &= ~SEQUOIA_LED_BACK;
-#endif
- led_state |= LED_STATE_ENABLED;
- break;
-
- case led_stop:
- hw_led_state &= ~SEQUOIA_LED_BACK;
- hw_led_state |= SEQUOIA_LED_GREEN;
- hw_led_state |= SEQUOIA_LED_AMBER;
- led_state &= ~LED_STATE_ENABLED;
- break;
-
- case led_claim:
- led_state |= LED_STATE_CLAIMED;
- saved_state = hw_led_state;
- hw_led_state &= ~SEQUOIA_LED_BACK;
- hw_led_state |= SEQUOIA_LED_GREEN;
- hw_led_state |= SEQUOIA_LED_AMBER;
- break;
-
- case led_release:
- led_state &= ~LED_STATE_CLAIMED;
- hw_led_state = saved_state;
- break;
-
-#ifdef CONFIG_LEDS_TIMER
- case led_timer:
- if (!(led_state & LED_STATE_CLAIMED))
- hw_led_state ^= SEQUOIA_LED_GREEN;
- break;
-#endif
-
-#ifdef CONFIG_LEDS_CPU
- case led_idle_start:
- if (!(led_state & LED_STATE_CLAIMED))
- hw_led_state &= ~SEQUOIA_LED_BACK;
- break;
-
- case led_idle_end:
- if (!(led_state & LED_STATE_CLAIMED))
- hw_led_state |= SEQUOIA_LED_BACK;
- break;
-#endif
-
- case led_green_on:
- if (led_state & LED_STATE_CLAIMED)
- hw_led_state &= ~SEQUOIA_LED_GREEN;
- break;
-
- case led_green_off:
- if (led_state & LED_STATE_CLAIMED)
- hw_led_state |= SEQUOIA_LED_GREEN;
- break;
-
- case led_amber_on:
- if (led_state & LED_STATE_CLAIMED)
- hw_led_state &= ~SEQUOIA_LED_AMBER;
- break;
-
- case led_amber_off:
- if (led_state & LED_STATE_CLAIMED)
- hw_led_state |= SEQUOIA_LED_AMBER;
- break;
-
- case led_red_on:
- if (led_state & LED_STATE_CLAIMED)
- hw_led_state |= SEQUOIA_LED_BACK;
- break;
-
- case led_red_off:
- if (led_state & LED_STATE_CLAIMED)
- hw_led_state &= ~SEQUOIA_LED_BACK;
- break;
-
- default:
- break;
- }
-
- if (led_state & LED_STATE_ENABLED)
- sequoia_write(hw_led_state,0x09);
+ struct shark_led *led = container_of(cdev,
+ struct shark_led, cdev);
+ u16 reg = led_reg_read();
- spin_unlock_irqrestore(&leds_lock, flags);
+ return (reg & led->mask) ? LED_FULL : LED_OFF;
}
-static int __init leds_init(void)
+static int __init shark_leds_init(void)
{
- extern void (*leds_event)(led_event_t);
- short temp;
-
- leds_event = sequoia_leds_event;
+ int i;
+ u16 reg;
+
+ if (!machine_is_shark())
+ return -ENODEV;
+
+ for (i = 0; i < ARRAY_SIZE(shark_leds); i++) {
+ struct shark_led *led;
+
+ led = kzalloc(sizeof(*led), GFP_KERNEL);
+ if (!led)
+ break;
+
+ led->cdev.name = shark_leds[i].name;
+ led->cdev.brightness_set = shark_led_set;
+ led->cdev.brightness_get = shark_led_get;
+ led->cdev.default_trigger = shark_leds[i].trigger;
+
+ /* Count in 5 bits offset */
+ led->mask = BIT(i + 5);
+
+ if (led_classdev_register(NULL, &led->cdev) < 0) {
+ kfree(led);
+ break;
+ }
+ }
/* Make LEDs independent of power-state */
- request_region(0x24,4,"sequoia");
- temp = sequoia_read(0x09);
- temp |= 1<<10;
- sequoia_write(temp,0x09);
- leds_event(led_start);
+ request_region(0x24, 4, "led_reg");
+ reg = led_reg_read();
+ reg |= 1 << 10;
+ led_reg_write(reg);
+
return 0;
}
-__initcall(leds_init);
+/*
+ * Since we may have triggers on any subsystem, defer registration
+ * until after subsystem_init.
+ */
+fs_initcall(shark_leds_init);
--
1.7.5
^ permalink raw reply related [flat|nested] 49+ messages in thread
* [PATCH 06/18] mach-shark: retire custom LED code
@ 2011-08-26 9:03 ` Bryan Wu
0 siblings, 0 replies; 49+ messages in thread
From: Bryan Wu @ 2011-08-26 9:03 UTC (permalink / raw)
To: linux-arm-kernel
The CPU activity LED is now handled by the trigger in the leds
subsystem, retire this old CONFIG_LEDS-based code.
Signed-off-by: Bryan Wu <bryan.wu@canonical.com>
---
arch/arm/mach-shark/Makefile | 4 +-
arch/arm/mach-shark/core.c | 1 -
arch/arm/mach-shark/leds.c | 227 ++++++++++++++++--------------------------
3 files changed, 89 insertions(+), 143 deletions(-)
diff --git a/arch/arm/mach-shark/Makefile b/arch/arm/mach-shark/Makefile
index 45be9b0..2965718 100644
--- a/arch/arm/mach-shark/Makefile
+++ b/arch/arm/mach-shark/Makefile
@@ -4,9 +4,7 @@
# Object file lists.
-obj-y := core.o dma.o irq.o pci.o
+obj-y := core.o dma.o irq.o pci.o leds.o
obj-m :=
obj-n :=
obj- :=
-
-obj-$(CONFIG_LEDS) += leds.o
diff --git a/arch/arm/mach-shark/core.c b/arch/arm/mach-shark/core.c
index ac2873c..36b6b87 100644
--- a/arch/arm/mach-shark/core.c
+++ b/arch/arm/mach-shark/core.c
@@ -13,7 +13,6 @@
#include <asm/setup.h>
#include <asm/mach-types.h>
-#include <asm/leds.h>
#include <asm/param.h>
#include <asm/mach/map.h>
diff --git a/arch/arm/mach-shark/leds.c b/arch/arm/mach-shark/leds.c
index c9e32de..55433b0 100644
--- a/arch/arm/mach-shark/leds.c
+++ b/arch/arm/mach-shark/leds.c
@@ -1,166 +1,115 @@
/*
- * arch/arm/mach-shark/leds.c
- * by Alexander Schulz
- *
- * derived from:
- * arch/arm/kernel/leds-footbridge.c
- * Copyright (C) 1998-1999 Russell King
- *
* DIGITAL Shark LED control routines.
*
- * The leds use is as follows:
- * - Green front - toggles state every 50 timer interrupts
- * - Amber front - Unused, this is a dual color led (Amber/Green)
- * - Amber back - On if system is not idle
+ * Driver for the 3 user LEDs found on the Shark
+ * Based on Versatile and RealView machine LED code
*
- * Changelog:
+ * License terms: GNU General Public License (GPL) version 2
+ * Author: Bryan Wu <bryan.wu@canonical.com>
*/
#include <linux/kernel.h>
-#include <linux/module.h>
#include <linux/init.h>
-#include <linux/spinlock.h>
-#include <linux/ioport.h>
#include <linux/io.h>
+#include <linux/ioport.h>
+#include <linux/slab.h>
+#include <linux/leds.h>
-#include <asm/leds.h>
-#include <asm/system.h>
+#include <asm/mach-types.h>
-#define LED_STATE_ENABLED 1
-#define LED_STATE_CLAIMED 2
+struct shark_led {
+ struct led_classdev cdev;
+ u8 mask;
+};
-#define SEQUOIA_LED_GREEN (1<<6)
-#define SEQUOIA_LED_AMBER (1<<5)
-#define SEQUOIA_LED_BACK (1<<7)
+/*
+ * The triggers lines up below will only be used if the
+ * LED triggers are compiled in.
+ */
+static const struct {
+ const char *name;
+ const char *trigger;
+} shark_leds[] = {
+ { "shark:amber0", "default-on", }, /* Bit 5 */
+ { "shark:green", "heartbeat", }, /* Bit 6 */
+ { "shark:amber1", "cpu0" }, /* Bit 7 */
+};
+
+static u16 led_reg_read(void)
+{
+ outw(0x09, 0x24);
+ return inw(0x26);
+}
-static char led_state;
-static short hw_led_state;
-static short saved_state;
+static void led_reg_write(u16 value)
+{
+ outw(0x09, 0x24);
+ outw(value, 0x26);
+}
-static DEFINE_SPINLOCK(leds_lock);
+static void shark_led_set(struct led_classdev *cdev,
+ enum led_brightness b)
+{
+ struct shark_led *led = container_of(cdev,
+ struct shark_led, cdev);
+ u16 reg = led_reg_read();
-short sequoia_read(int addr) {
- outw(addr,0x24);
- return inw(0x26);
-}
+ if (b != LED_OFF)
+ reg |= led->mask;
+ else
+ reg &= ~led->mask;
-void sequoia_write(short value,short addr) {
- outw(addr,0x24);
- outw(value,0x26);
+ led_reg_write(reg);
}
-static void sequoia_leds_event(led_event_t evt)
+static enum led_brightness shark_led_get(struct led_classdev *cdev)
{
- unsigned long flags;
-
- spin_lock_irqsave(&leds_lock, flags);
-
- hw_led_state = sequoia_read(0x09);
-
- switch (evt) {
- case led_start:
- hw_led_state |= SEQUOIA_LED_GREEN;
- hw_led_state |= SEQUOIA_LED_AMBER;
-#ifdef CONFIG_LEDS_CPU
- hw_led_state |= SEQUOIA_LED_BACK;
-#else
- hw_led_state &= ~SEQUOIA_LED_BACK;
-#endif
- led_state |= LED_STATE_ENABLED;
- break;
-
- case led_stop:
- hw_led_state &= ~SEQUOIA_LED_BACK;
- hw_led_state |= SEQUOIA_LED_GREEN;
- hw_led_state |= SEQUOIA_LED_AMBER;
- led_state &= ~LED_STATE_ENABLED;
- break;
-
- case led_claim:
- led_state |= LED_STATE_CLAIMED;
- saved_state = hw_led_state;
- hw_led_state &= ~SEQUOIA_LED_BACK;
- hw_led_state |= SEQUOIA_LED_GREEN;
- hw_led_state |= SEQUOIA_LED_AMBER;
- break;
-
- case led_release:
- led_state &= ~LED_STATE_CLAIMED;
- hw_led_state = saved_state;
- break;
-
-#ifdef CONFIG_LEDS_TIMER
- case led_timer:
- if (!(led_state & LED_STATE_CLAIMED))
- hw_led_state ^= SEQUOIA_LED_GREEN;
- break;
-#endif
-
-#ifdef CONFIG_LEDS_CPU
- case led_idle_start:
- if (!(led_state & LED_STATE_CLAIMED))
- hw_led_state &= ~SEQUOIA_LED_BACK;
- break;
-
- case led_idle_end:
- if (!(led_state & LED_STATE_CLAIMED))
- hw_led_state |= SEQUOIA_LED_BACK;
- break;
-#endif
-
- case led_green_on:
- if (led_state & LED_STATE_CLAIMED)
- hw_led_state &= ~SEQUOIA_LED_GREEN;
- break;
-
- case led_green_off:
- if (led_state & LED_STATE_CLAIMED)
- hw_led_state |= SEQUOIA_LED_GREEN;
- break;
-
- case led_amber_on:
- if (led_state & LED_STATE_CLAIMED)
- hw_led_state &= ~SEQUOIA_LED_AMBER;
- break;
-
- case led_amber_off:
- if (led_state & LED_STATE_CLAIMED)
- hw_led_state |= SEQUOIA_LED_AMBER;
- break;
-
- case led_red_on:
- if (led_state & LED_STATE_CLAIMED)
- hw_led_state |= SEQUOIA_LED_BACK;
- break;
-
- case led_red_off:
- if (led_state & LED_STATE_CLAIMED)
- hw_led_state &= ~SEQUOIA_LED_BACK;
- break;
-
- default:
- break;
- }
-
- if (led_state & LED_STATE_ENABLED)
- sequoia_write(hw_led_state,0x09);
+ struct shark_led *led = container_of(cdev,
+ struct shark_led, cdev);
+ u16 reg = led_reg_read();
- spin_unlock_irqrestore(&leds_lock, flags);
+ return (reg & led->mask) ? LED_FULL : LED_OFF;
}
-static int __init leds_init(void)
+static int __init shark_leds_init(void)
{
- extern void (*leds_event)(led_event_t);
- short temp;
-
- leds_event = sequoia_leds_event;
+ int i;
+ u16 reg;
+
+ if (!machine_is_shark())
+ return -ENODEV;
+
+ for (i = 0; i < ARRAY_SIZE(shark_leds); i++) {
+ struct shark_led *led;
+
+ led = kzalloc(sizeof(*led), GFP_KERNEL);
+ if (!led)
+ break;
+
+ led->cdev.name = shark_leds[i].name;
+ led->cdev.brightness_set = shark_led_set;
+ led->cdev.brightness_get = shark_led_get;
+ led->cdev.default_trigger = shark_leds[i].trigger;
+
+ /* Count in 5 bits offset */
+ led->mask = BIT(i + 5);
+
+ if (led_classdev_register(NULL, &led->cdev) < 0) {
+ kfree(led);
+ break;
+ }
+ }
/* Make LEDs independent of power-state */
- request_region(0x24,4,"sequoia");
- temp = sequoia_read(0x09);
- temp |= 1<<10;
- sequoia_write(temp,0x09);
- leds_event(led_start);
+ request_region(0x24, 4, "led_reg");
+ reg = led_reg_read();
+ reg |= 1 << 10;
+ led_reg_write(reg);
+
return 0;
}
-__initcall(leds_init);
+/*
+ * Since we may have triggers on any subsystem, defer registration
+ * until after subsystem_init.
+ */
+fs_initcall(shark_leds_init);
--
1.7.5
^ permalink raw reply related [flat|nested] 49+ messages in thread
* [PATCH 07/18] mach-orion5x: convert custom LED code to gpio_led and LED CPU trigger
2011-08-26 9:03 ` Bryan Wu
@ 2011-08-26 9:03 ` Bryan Wu
-1 siblings, 0 replies; 49+ messages in thread
From: Bryan Wu @ 2011-08-26 9:03 UTC (permalink / raw)
To: linux, linus.walleij, rpurdie, tony, jochen, linux,
nicolas.pitre, arnd, linux-arm-kernel, jamie, linux-kernel
Signed-off-by: Bryan Wu <bryan.wu@canonical.com>
Acked-by: Nicolas Pitre <nico@fluxnic.net>
---
arch/arm/mach-orion5x/rd88f5181l-fxo-setup.c | 1 -
arch/arm/mach-orion5x/rd88f5181l-ge-setup.c | 1 -
arch/arm/mach-orion5x/rd88f5182-setup.c | 74 ++++++++------------------
arch/arm/mach-orion5x/rd88f6183ap-ge-setup.c | 1 -
4 files changed, 23 insertions(+), 54 deletions(-)
diff --git a/arch/arm/mach-orion5x/rd88f5181l-fxo-setup.c b/arch/arm/mach-orion5x/rd88f5181l-fxo-setup.c
index 291d22b..fb9c635 100644
--- a/arch/arm/mach-orion5x/rd88f5181l-fxo-setup.c
+++ b/arch/arm/mach-orion5x/rd88f5181l-fxo-setup.c
@@ -19,7 +19,6 @@
#include <net/dsa.h>
#include <asm/mach-types.h>
#include <asm/gpio.h>
-#include <asm/leds.h>
#include <asm/mach/arch.h>
#include <asm/mach/pci.h>
#include <mach/orion5x.h>
diff --git a/arch/arm/mach-orion5x/rd88f5181l-ge-setup.c b/arch/arm/mach-orion5x/rd88f5181l-ge-setup.c
index 3f02362..f4d64e6 100644
--- a/arch/arm/mach-orion5x/rd88f5181l-ge-setup.c
+++ b/arch/arm/mach-orion5x/rd88f5181l-ge-setup.c
@@ -20,7 +20,6 @@
#include <net/dsa.h>
#include <asm/mach-types.h>
#include <asm/gpio.h>
-#include <asm/leds.h>
#include <asm/mach/arch.h>
#include <asm/mach/pci.h>
#include <mach/orion5x.h>
diff --git a/arch/arm/mach-orion5x/rd88f5182-setup.c b/arch/arm/mach-orion5x/rd88f5182-setup.c
index 27fd38e..6c6cd48 100644
--- a/arch/arm/mach-orion5x/rd88f5182-setup.c
+++ b/arch/arm/mach-orion5x/rd88f5182-setup.c
@@ -19,9 +19,9 @@
#include <linux/mv643xx_eth.h>
#include <linux/ata_platform.h>
#include <linux/i2c.h>
+#include <linux/gpio.h>
+#include <linux/leds.h>
#include <asm/mach-types.h>
-#include <asm/gpio.h>
-#include <asm/leds.h>
#include <asm/mach/arch.h>
#include <asm/mach/pci.h>
#include <mach/orion5x.h>
@@ -54,12 +54,6 @@
#define RD88F5182_PCI_SLOT0_IRQ_A_PIN 7
#define RD88F5182_PCI_SLOT0_IRQ_B_PIN 6
-/*
- * GPIO Debug LED
- */
-
-#define RD88F5182_GPIO_DBG_LED 0
-
/*****************************************************************************
* 16M NOR Flash on Device bus CS1
****************************************************************************/
@@ -84,55 +78,32 @@ static struct platform_device rd88f5182_nor_flash = {
.resource = &rd88f5182_nor_flash_resource,
};
-#ifdef CONFIG_LEDS
-
/*****************************************************************************
- * Use GPIO debug led as CPU active indication
+ * Use GPIO LED as CPU active indication
****************************************************************************/
-static void rd88f5182_dbgled_event(led_event_t evt)
-{
- int val;
-
- if (evt == led_idle_end)
- val = 1;
- else if (evt == led_idle_start)
- val = 0;
- else
- return;
-
- gpio_set_value(RD88F5182_GPIO_DBG_LED, val);
-}
-
-static int __init rd88f5182_dbgled_init(void)
-{
- int pin;
-
- if (machine_is_rd88f5182()) {
- pin = RD88F5182_GPIO_DBG_LED;
+#define RD88F5182_GPIO_LED 0
- if (gpio_request(pin, "DBGLED") == 0) {
- if (gpio_direction_output(pin, 0) != 0) {
- printk(KERN_ERR "rd88f5182_dbgled_init failed "
- "to set output pin %d\n", pin);
- gpio_free(pin);
- return 0;
- }
- } else {
- printk(KERN_ERR "rd88f5182_dbgled_init failed "
- "to request gpio %d\n", pin);
- return 0;
- }
-
- leds_event = rd88f5182_dbgled_event;
- }
-
- return 0;
-}
+static struct gpio_led rd88f5182_gpio_led_pins[] = {
+ {
+ .name = "rd88f5182:cpu",
+ .default_trigger = "cpu0",
+ .gpio = RD88F5182_GPIO_LED,
+ },
+};
-__initcall(rd88f5182_dbgled_init);
+static struct gpio_led_platform_data rd88f5182_gpio_led_data = {
+ .leds = rd88f5182_gpio_led_pins,
+ .num_leds = ARRAY_SIZE(rd88f5182_gpio_led_pins),
+};
-#endif
+static struct platform_device rd88f5182_gpio_leds = {
+ .name = "leds-gpio",
+ .id = -1,
+ .dev = {
+ .platform_data = &rd88f5182_gpio_led_data,
+ },
+};
/*****************************************************************************
* PCI
@@ -300,6 +271,7 @@ static void __init rd88f5182_init(void)
orion5x_setup_dev1_win(RD88F5182_NOR_BASE, RD88F5182_NOR_SIZE);
platform_device_register(&rd88f5182_nor_flash);
+ platform_device_register(&rd88f5182_gpio_leds);
i2c_register_board_info(0, &rd88f5182_i2c_rtc, 1);
}
diff --git a/arch/arm/mach-orion5x/rd88f6183ap-ge-setup.c b/arch/arm/mach-orion5x/rd88f6183ap-ge-setup.c
index ad2eba9..0c5d1d2 100644
--- a/arch/arm/mach-orion5x/rd88f6183ap-ge-setup.c
+++ b/arch/arm/mach-orion5x/rd88f6183ap-ge-setup.c
@@ -22,7 +22,6 @@
#include <net/dsa.h>
#include <asm/mach-types.h>
#include <asm/gpio.h>
-#include <asm/leds.h>
#include <asm/mach/arch.h>
#include <asm/mach/pci.h>
#include <mach/orion5x.h>
--
1.7.5
^ permalink raw reply related [flat|nested] 49+ messages in thread
* [PATCH 07/18] mach-orion5x: convert custom LED code to gpio_led and LED CPU trigger
@ 2011-08-26 9:03 ` Bryan Wu
0 siblings, 0 replies; 49+ messages in thread
From: Bryan Wu @ 2011-08-26 9:03 UTC (permalink / raw)
To: linux-arm-kernel
Signed-off-by: Bryan Wu <bryan.wu@canonical.com>
Acked-by: Nicolas Pitre <nico@fluxnic.net>
---
arch/arm/mach-orion5x/rd88f5181l-fxo-setup.c | 1 -
arch/arm/mach-orion5x/rd88f5181l-ge-setup.c | 1 -
arch/arm/mach-orion5x/rd88f5182-setup.c | 74 ++++++++------------------
arch/arm/mach-orion5x/rd88f6183ap-ge-setup.c | 1 -
4 files changed, 23 insertions(+), 54 deletions(-)
diff --git a/arch/arm/mach-orion5x/rd88f5181l-fxo-setup.c b/arch/arm/mach-orion5x/rd88f5181l-fxo-setup.c
index 291d22b..fb9c635 100644
--- a/arch/arm/mach-orion5x/rd88f5181l-fxo-setup.c
+++ b/arch/arm/mach-orion5x/rd88f5181l-fxo-setup.c
@@ -19,7 +19,6 @@
#include <net/dsa.h>
#include <asm/mach-types.h>
#include <asm/gpio.h>
-#include <asm/leds.h>
#include <asm/mach/arch.h>
#include <asm/mach/pci.h>
#include <mach/orion5x.h>
diff --git a/arch/arm/mach-orion5x/rd88f5181l-ge-setup.c b/arch/arm/mach-orion5x/rd88f5181l-ge-setup.c
index 3f02362..f4d64e6 100644
--- a/arch/arm/mach-orion5x/rd88f5181l-ge-setup.c
+++ b/arch/arm/mach-orion5x/rd88f5181l-ge-setup.c
@@ -20,7 +20,6 @@
#include <net/dsa.h>
#include <asm/mach-types.h>
#include <asm/gpio.h>
-#include <asm/leds.h>
#include <asm/mach/arch.h>
#include <asm/mach/pci.h>
#include <mach/orion5x.h>
diff --git a/arch/arm/mach-orion5x/rd88f5182-setup.c b/arch/arm/mach-orion5x/rd88f5182-setup.c
index 27fd38e..6c6cd48 100644
--- a/arch/arm/mach-orion5x/rd88f5182-setup.c
+++ b/arch/arm/mach-orion5x/rd88f5182-setup.c
@@ -19,9 +19,9 @@
#include <linux/mv643xx_eth.h>
#include <linux/ata_platform.h>
#include <linux/i2c.h>
+#include <linux/gpio.h>
+#include <linux/leds.h>
#include <asm/mach-types.h>
-#include <asm/gpio.h>
-#include <asm/leds.h>
#include <asm/mach/arch.h>
#include <asm/mach/pci.h>
#include <mach/orion5x.h>
@@ -54,12 +54,6 @@
#define RD88F5182_PCI_SLOT0_IRQ_A_PIN 7
#define RD88F5182_PCI_SLOT0_IRQ_B_PIN 6
-/*
- * GPIO Debug LED
- */
-
-#define RD88F5182_GPIO_DBG_LED 0
-
/*****************************************************************************
* 16M NOR Flash on Device bus CS1
****************************************************************************/
@@ -84,55 +78,32 @@ static struct platform_device rd88f5182_nor_flash = {
.resource = &rd88f5182_nor_flash_resource,
};
-#ifdef CONFIG_LEDS
-
/*****************************************************************************
- * Use GPIO debug led as CPU active indication
+ * Use GPIO LED as CPU active indication
****************************************************************************/
-static void rd88f5182_dbgled_event(led_event_t evt)
-{
- int val;
-
- if (evt == led_idle_end)
- val = 1;
- else if (evt == led_idle_start)
- val = 0;
- else
- return;
-
- gpio_set_value(RD88F5182_GPIO_DBG_LED, val);
-}
-
-static int __init rd88f5182_dbgled_init(void)
-{
- int pin;
-
- if (machine_is_rd88f5182()) {
- pin = RD88F5182_GPIO_DBG_LED;
+#define RD88F5182_GPIO_LED 0
- if (gpio_request(pin, "DBGLED") == 0) {
- if (gpio_direction_output(pin, 0) != 0) {
- printk(KERN_ERR "rd88f5182_dbgled_init failed "
- "to set output pin %d\n", pin);
- gpio_free(pin);
- return 0;
- }
- } else {
- printk(KERN_ERR "rd88f5182_dbgled_init failed "
- "to request gpio %d\n", pin);
- return 0;
- }
-
- leds_event = rd88f5182_dbgled_event;
- }
-
- return 0;
-}
+static struct gpio_led rd88f5182_gpio_led_pins[] = {
+ {
+ .name = "rd88f5182:cpu",
+ .default_trigger = "cpu0",
+ .gpio = RD88F5182_GPIO_LED,
+ },
+};
-__initcall(rd88f5182_dbgled_init);
+static struct gpio_led_platform_data rd88f5182_gpio_led_data = {
+ .leds = rd88f5182_gpio_led_pins,
+ .num_leds = ARRAY_SIZE(rd88f5182_gpio_led_pins),
+};
-#endif
+static struct platform_device rd88f5182_gpio_leds = {
+ .name = "leds-gpio",
+ .id = -1,
+ .dev = {
+ .platform_data = &rd88f5182_gpio_led_data,
+ },
+};
/*****************************************************************************
* PCI
@@ -300,6 +271,7 @@ static void __init rd88f5182_init(void)
orion5x_setup_dev1_win(RD88F5182_NOR_BASE, RD88F5182_NOR_SIZE);
platform_device_register(&rd88f5182_nor_flash);
+ platform_device_register(&rd88f5182_gpio_leds);
i2c_register_board_info(0, &rd88f5182_i2c_rtc, 1);
}
diff --git a/arch/arm/mach-orion5x/rd88f6183ap-ge-setup.c b/arch/arm/mach-orion5x/rd88f6183ap-ge-setup.c
index ad2eba9..0c5d1d2 100644
--- a/arch/arm/mach-orion5x/rd88f6183ap-ge-setup.c
+++ b/arch/arm/mach-orion5x/rd88f6183ap-ge-setup.c
@@ -22,7 +22,6 @@
#include <net/dsa.h>
#include <asm/mach-types.h>
#include <asm/gpio.h>
-#include <asm/leds.h>
#include <asm/mach/arch.h>
#include <asm/mach/pci.h>
#include <mach/orion5x.h>
--
1.7.5
^ permalink raw reply related [flat|nested] 49+ messages in thread
* [PATCH 08/18] mach-integrator: move CM_CTRL to header file for accessing by other functions
2011-08-26 9:03 ` Bryan Wu
@ 2011-08-26 9:03 ` Bryan Wu
-1 siblings, 0 replies; 49+ messages in thread
From: Bryan Wu @ 2011-08-26 9:03 UTC (permalink / raw)
To: linux, linus.walleij, rpurdie, tony, jochen, linux,
nicolas.pitre, arnd, linux-arm-kernel, jamie, linux-kernel
Signed-off-by: Bryan Wu <bryan.wu@canonical.com>
---
arch/arm/mach-integrator/core.c | 2 --
arch/arm/mach-integrator/include/mach/cm.h | 2 ++
2 files changed, 2 insertions(+), 2 deletions(-)
diff --git a/arch/arm/mach-integrator/core.c b/arch/arm/mach-integrator/core.c
index 77315b9..3267cdd 100644
--- a/arch/arm/mach-integrator/core.c
+++ b/arch/arm/mach-integrator/core.c
@@ -203,8 +203,6 @@ static struct amba_pl010_data integrator_uart_data = {
.set_mctrl = integrator_uart_set_mctrl,
};
-#define CM_CTRL IO_ADDRESS(INTEGRATOR_HDR_CTRL)
-
static DEFINE_SPINLOCK(cm_lock);
/**
diff --git a/arch/arm/mach-integrator/include/mach/cm.h b/arch/arm/mach-integrator/include/mach/cm.h
index 445d57a..1a78692e 100644
--- a/arch/arm/mach-integrator/include/mach/cm.h
+++ b/arch/arm/mach-integrator/include/mach/cm.h
@@ -3,6 +3,8 @@
*/
void cm_control(u32, u32);
+#define CM_CTRL IO_ADDRESS(INTEGRATOR_HDR_CTRL)
+
#define CM_CTRL_LED (1 << 0)
#define CM_CTRL_nMBDET (1 << 1)
#define CM_CTRL_REMAP (1 << 2)
--
1.7.5
^ permalink raw reply related [flat|nested] 49+ messages in thread
* [PATCH 08/18] mach-integrator: move CM_CTRL to header file for accessing by other functions
@ 2011-08-26 9:03 ` Bryan Wu
0 siblings, 0 replies; 49+ messages in thread
From: Bryan Wu @ 2011-08-26 9:03 UTC (permalink / raw)
To: linux-arm-kernel
Signed-off-by: Bryan Wu <bryan.wu@canonical.com>
---
arch/arm/mach-integrator/core.c | 2 --
arch/arm/mach-integrator/include/mach/cm.h | 2 ++
2 files changed, 2 insertions(+), 2 deletions(-)
diff --git a/arch/arm/mach-integrator/core.c b/arch/arm/mach-integrator/core.c
index 77315b9..3267cdd 100644
--- a/arch/arm/mach-integrator/core.c
+++ b/arch/arm/mach-integrator/core.c
@@ -203,8 +203,6 @@ static struct amba_pl010_data integrator_uart_data = {
.set_mctrl = integrator_uart_set_mctrl,
};
-#define CM_CTRL IO_ADDRESS(INTEGRATOR_HDR_CTRL)
-
static DEFINE_SPINLOCK(cm_lock);
/**
diff --git a/arch/arm/mach-integrator/include/mach/cm.h b/arch/arm/mach-integrator/include/mach/cm.h
index 445d57a..1a78692e 100644
--- a/arch/arm/mach-integrator/include/mach/cm.h
+++ b/arch/arm/mach-integrator/include/mach/cm.h
@@ -3,6 +3,8 @@
*/
void cm_control(u32, u32);
+#define CM_CTRL IO_ADDRESS(INTEGRATOR_HDR_CTRL)
+
#define CM_CTRL_LED (1 << 0)
#define CM_CTRL_nMBDET (1 << 1)
#define CM_CTRL_REMAP (1 << 2)
--
1.7.5
^ permalink raw reply related [flat|nested] 49+ messages in thread
* [PATCH 09/18] mach-integrator: retire custom LED code
2011-08-26 9:03 ` Bryan Wu
@ 2011-08-26 9:03 ` Bryan Wu
-1 siblings, 0 replies; 49+ messages in thread
From: Bryan Wu @ 2011-08-26 9:03 UTC (permalink / raw)
To: linux, linus.walleij, rpurdie, tony, jochen, linux,
nicolas.pitre, arnd, linux-arm-kernel, jamie, linux-kernel
Use the LED in core module for CPU activity and also enable 4
debugging LEDs in baseboard.
The CPU activity LED is now handled by the trigger in the leds
subsystem, retire this old CONFIG_LEDS-based code.
Signed-off-by: Bryan Wu <bryan.wu@canonical.com>
---
arch/arm/mach-integrator/Makefile | 3 +-
arch/arm/mach-integrator/core.c | 1 -
arch/arm/mach-integrator/leds.c | 159 ++++++++++++++++++++++---------------
3 files changed, 96 insertions(+), 67 deletions(-)
diff --git a/arch/arm/mach-integrator/Makefile b/arch/arm/mach-integrator/Makefile
index ebeef96..5521d18 100644
--- a/arch/arm/mach-integrator/Makefile
+++ b/arch/arm/mach-integrator/Makefile
@@ -4,11 +4,10 @@
# Object file lists.
-obj-y := core.o lm.o
+obj-y := core.o lm.o leds.o
obj-$(CONFIG_ARCH_INTEGRATOR_AP) += integrator_ap.o
obj-$(CONFIG_ARCH_INTEGRATOR_CP) += integrator_cp.o
-obj-$(CONFIG_LEDS) += leds.o
obj-$(CONFIG_PCI) += pci_v3.o pci.o
obj-$(CONFIG_CPU_FREQ_INTEGRATOR) += cpu.o
obj-$(CONFIG_INTEGRATOR_IMPD1) += impd1.o
diff --git a/arch/arm/mach-integrator/core.c b/arch/arm/mach-integrator/core.c
index 3267cdd..f9c638d 100644
--- a/arch/arm/mach-integrator/core.c
+++ b/arch/arm/mach-integrator/core.c
@@ -28,7 +28,6 @@
#include <asm/irq.h>
#include <mach/cm.h>
#include <asm/system.h>
-#include <asm/leds.h>
#include <asm/mach/time.h>
#include <asm/pgtable.h>
diff --git a/arch/arm/mach-integrator/leds.c b/arch/arm/mach-integrator/leds.c
index 28be186..dab912b 100644
--- a/arch/arm/mach-integrator/leds.c
+++ b/arch/arm/mach-integrator/leds.c
@@ -1,91 +1,122 @@
/*
- * linux/arch/arm/mach-integrator/leds.c
+ * Driver for the 4 user LEDs found on the Integrator AP/CP baseboard
+ * Based on Versatile and RealView machine LED code
*
- * Integrator/AP and Integrator/CP LED control routines
- *
- * Copyright (C) 1999 ARM Limited
- * Copyright (C) 2000 Deep Blue Solutions Ltd
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ * License terms: GNU General Public License (GPL) version 2
+ * Author: Bryan Wu <bryan.wu@canonical.com>
*/
#include <linux/kernel.h>
#include <linux/init.h>
-#include <linux/smp.h>
-#include <linux/spinlock.h>
#include <linux/io.h>
+#include <linux/slab.h>
+#include <linux/leds.h>
+#include <mach/cm.h>
#include <mach/hardware.h>
#include <mach/platform.h>
-#include <asm/leds.h>
-#include <asm/system.h>
-#include <asm/mach-types.h>
-#include <mach/cm.h>
-static int saved_leds;
+#define ALPHA_REG __io_address(INTEGRATOR_DBG_BASE)
+#define LEDREG (__io_address(INTEGRATOR_DBG_BASE) + INTEGRATOR_DBG_LEDS_OFFSET)
+
+struct integrator_led {
+ struct led_classdev cdev;
+ u8 mask;
+};
+
+/*
+ * The triggers lines up below will only be used if the
+ * LED triggers are compiled in.
+ */
+static const struct {
+ const char *name;
+ const char *trigger;
+} integrator_leds[] = {
+ { "integrator:green0", "heartbeat", },
+ { "integrator:yellow", },
+ { "integrator:red", },
+ { "integrator:green1", },
+ { "integrator:core_module", "cpu0", },
+};
-static void integrator_leds_event(led_event_t ledevt)
+static void integrator_led_set(struct led_classdev *cdev,
+ enum led_brightness b)
{
- unsigned long flags;
- const unsigned int dbg_base = IO_ADDRESS(INTEGRATOR_DBG_BASE);
- unsigned int update_alpha_leds;
+ struct integrator_led *led = container_of(cdev,
+ struct integrator_led, cdev);
+ u32 reg = __raw_readl(LEDREG);
- // yup, change the LEDs
- local_irq_save(flags);
- update_alpha_leds = 0;
+ if (b != LED_OFF)
+ reg |= led->mask;
+ else
+ reg &= ~led->mask;
- switch(ledevt) {
- case led_idle_start:
- cm_control(CM_CTRL_LED, 0);
- break;
+ while (__raw_readl(ALPHA_REG) & 1)
+ cpu_relax();
- case led_idle_end:
- cm_control(CM_CTRL_LED, CM_CTRL_LED);
- break;
+ __raw_writel(reg, LEDREG);
+}
- case led_timer:
- saved_leds ^= GREEN_LED;
- update_alpha_leds = 1;
- break;
+static enum led_brightness integrator_led_get(struct led_classdev *cdev)
+{
+ struct integrator_led *led = container_of(cdev,
+ struct integrator_led, cdev);
+ u32 reg = __raw_readl(LEDREG);
- case led_red_on:
- saved_leds |= RED_LED;
- update_alpha_leds = 1;
- break;
+ return (reg & led->mask) ? LED_FULL : LED_OFF;
+}
- case led_red_off:
- saved_leds &= ~RED_LED;
- update_alpha_leds = 1;
- break;
+static void cm_led_set(struct led_classdev *cdev,
+ enum led_brightness b)
+{
+ if (b != LED_OFF)
+ cm_control(CM_CTRL_LED, CM_CTRL_LED);
+ else
+ cm_control(CM_CTRL_LED, 0);
+}
- default:
- break;
- }
+static enum led_brightness cm_led_get(struct led_classdev *cdev)
+{
+ u32 reg = readl(CM_CTRL);
- if (update_alpha_leds) {
- while (__raw_readl(dbg_base + INTEGRATOR_DBG_ALPHA_OFFSET) & 1);
- __raw_writel(saved_leds, dbg_base + INTEGRATOR_DBG_LEDS_OFFSET);
- }
- local_irq_restore(flags);
+ return (reg & CM_CTRL_LED) ? LED_FULL : LED_OFF;
}
-static int __init leds_init(void)
+static int __init integrator_leds_init(void)
{
- if (machine_is_integrator() || machine_is_cintegrator())
- leds_event = integrator_leds_event;
+ int i;
+
+ for (i = 0; i < ARRAY_SIZE(integrator_leds); i++) {
+ struct integrator_led *led;
+
+ led = kzalloc(sizeof(*led), GFP_KERNEL);
+ if (!led)
+ break;
+
+
+ led->cdev.name = integrator_leds[i].name;
+
+ if (i == 4) { /* Setting for LED in core module */
+ led->cdev.brightness_set = cm_led_set;
+ led->cdev.brightness_get = cm_led_get;
+ } else {
+ led->cdev.brightness_set = integrator_led_set;
+ led->cdev.brightness_get = integrator_led_get;
+ }
+
+ led->cdev.default_trigger = integrator_leds[i].trigger;
+ led->mask = BIT(i);
+
+ if (led_classdev_register(NULL, &led->cdev) < 0) {
+ kfree(led);
+ break;
+ }
+ }
return 0;
}
-core_initcall(leds_init);
+/*
+ * Since we may have triggers on any subsystem, defer registration
+ * until after subsystem_init.
+ */
+fs_initcall(integrator_leds_init);
--
1.7.5
^ permalink raw reply related [flat|nested] 49+ messages in thread
* [PATCH 09/18] mach-integrator: retire custom LED code
@ 2011-08-26 9:03 ` Bryan Wu
0 siblings, 0 replies; 49+ messages in thread
From: Bryan Wu @ 2011-08-26 9:03 UTC (permalink / raw)
To: linux-arm-kernel
Use the LED in core module for CPU activity and also enable 4
debugging LEDs in baseboard.
The CPU activity LED is now handled by the trigger in the leds
subsystem, retire this old CONFIG_LEDS-based code.
Signed-off-by: Bryan Wu <bryan.wu@canonical.com>
---
arch/arm/mach-integrator/Makefile | 3 +-
arch/arm/mach-integrator/core.c | 1 -
arch/arm/mach-integrator/leds.c | 159 ++++++++++++++++++++++---------------
3 files changed, 96 insertions(+), 67 deletions(-)
diff --git a/arch/arm/mach-integrator/Makefile b/arch/arm/mach-integrator/Makefile
index ebeef96..5521d18 100644
--- a/arch/arm/mach-integrator/Makefile
+++ b/arch/arm/mach-integrator/Makefile
@@ -4,11 +4,10 @@
# Object file lists.
-obj-y := core.o lm.o
+obj-y := core.o lm.o leds.o
obj-$(CONFIG_ARCH_INTEGRATOR_AP) += integrator_ap.o
obj-$(CONFIG_ARCH_INTEGRATOR_CP) += integrator_cp.o
-obj-$(CONFIG_LEDS) += leds.o
obj-$(CONFIG_PCI) += pci_v3.o pci.o
obj-$(CONFIG_CPU_FREQ_INTEGRATOR) += cpu.o
obj-$(CONFIG_INTEGRATOR_IMPD1) += impd1.o
diff --git a/arch/arm/mach-integrator/core.c b/arch/arm/mach-integrator/core.c
index 3267cdd..f9c638d 100644
--- a/arch/arm/mach-integrator/core.c
+++ b/arch/arm/mach-integrator/core.c
@@ -28,7 +28,6 @@
#include <asm/irq.h>
#include <mach/cm.h>
#include <asm/system.h>
-#include <asm/leds.h>
#include <asm/mach/time.h>
#include <asm/pgtable.h>
diff --git a/arch/arm/mach-integrator/leds.c b/arch/arm/mach-integrator/leds.c
index 28be186..dab912b 100644
--- a/arch/arm/mach-integrator/leds.c
+++ b/arch/arm/mach-integrator/leds.c
@@ -1,91 +1,122 @@
/*
- * linux/arch/arm/mach-integrator/leds.c
+ * Driver for the 4 user LEDs found on the Integrator AP/CP baseboard
+ * Based on Versatile and RealView machine LED code
*
- * Integrator/AP and Integrator/CP LED control routines
- *
- * Copyright (C) 1999 ARM Limited
- * Copyright (C) 2000 Deep Blue Solutions Ltd
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ * License terms: GNU General Public License (GPL) version 2
+ * Author: Bryan Wu <bryan.wu@canonical.com>
*/
#include <linux/kernel.h>
#include <linux/init.h>
-#include <linux/smp.h>
-#include <linux/spinlock.h>
#include <linux/io.h>
+#include <linux/slab.h>
+#include <linux/leds.h>
+#include <mach/cm.h>
#include <mach/hardware.h>
#include <mach/platform.h>
-#include <asm/leds.h>
-#include <asm/system.h>
-#include <asm/mach-types.h>
-#include <mach/cm.h>
-static int saved_leds;
+#define ALPHA_REG __io_address(INTEGRATOR_DBG_BASE)
+#define LEDREG (__io_address(INTEGRATOR_DBG_BASE) + INTEGRATOR_DBG_LEDS_OFFSET)
+
+struct integrator_led {
+ struct led_classdev cdev;
+ u8 mask;
+};
+
+/*
+ * The triggers lines up below will only be used if the
+ * LED triggers are compiled in.
+ */
+static const struct {
+ const char *name;
+ const char *trigger;
+} integrator_leds[] = {
+ { "integrator:green0", "heartbeat", },
+ { "integrator:yellow", },
+ { "integrator:red", },
+ { "integrator:green1", },
+ { "integrator:core_module", "cpu0", },
+};
-static void integrator_leds_event(led_event_t ledevt)
+static void integrator_led_set(struct led_classdev *cdev,
+ enum led_brightness b)
{
- unsigned long flags;
- const unsigned int dbg_base = IO_ADDRESS(INTEGRATOR_DBG_BASE);
- unsigned int update_alpha_leds;
+ struct integrator_led *led = container_of(cdev,
+ struct integrator_led, cdev);
+ u32 reg = __raw_readl(LEDREG);
- // yup, change the LEDs
- local_irq_save(flags);
- update_alpha_leds = 0;
+ if (b != LED_OFF)
+ reg |= led->mask;
+ else
+ reg &= ~led->mask;
- switch(ledevt) {
- case led_idle_start:
- cm_control(CM_CTRL_LED, 0);
- break;
+ while (__raw_readl(ALPHA_REG) & 1)
+ cpu_relax();
- case led_idle_end:
- cm_control(CM_CTRL_LED, CM_CTRL_LED);
- break;
+ __raw_writel(reg, LEDREG);
+}
- case led_timer:
- saved_leds ^= GREEN_LED;
- update_alpha_leds = 1;
- break;
+static enum led_brightness integrator_led_get(struct led_classdev *cdev)
+{
+ struct integrator_led *led = container_of(cdev,
+ struct integrator_led, cdev);
+ u32 reg = __raw_readl(LEDREG);
- case led_red_on:
- saved_leds |= RED_LED;
- update_alpha_leds = 1;
- break;
+ return (reg & led->mask) ? LED_FULL : LED_OFF;
+}
- case led_red_off:
- saved_leds &= ~RED_LED;
- update_alpha_leds = 1;
- break;
+static void cm_led_set(struct led_classdev *cdev,
+ enum led_brightness b)
+{
+ if (b != LED_OFF)
+ cm_control(CM_CTRL_LED, CM_CTRL_LED);
+ else
+ cm_control(CM_CTRL_LED, 0);
+}
- default:
- break;
- }
+static enum led_brightness cm_led_get(struct led_classdev *cdev)
+{
+ u32 reg = readl(CM_CTRL);
- if (update_alpha_leds) {
- while (__raw_readl(dbg_base + INTEGRATOR_DBG_ALPHA_OFFSET) & 1);
- __raw_writel(saved_leds, dbg_base + INTEGRATOR_DBG_LEDS_OFFSET);
- }
- local_irq_restore(flags);
+ return (reg & CM_CTRL_LED) ? LED_FULL : LED_OFF;
}
-static int __init leds_init(void)
+static int __init integrator_leds_init(void)
{
- if (machine_is_integrator() || machine_is_cintegrator())
- leds_event = integrator_leds_event;
+ int i;
+
+ for (i = 0; i < ARRAY_SIZE(integrator_leds); i++) {
+ struct integrator_led *led;
+
+ led = kzalloc(sizeof(*led), GFP_KERNEL);
+ if (!led)
+ break;
+
+
+ led->cdev.name = integrator_leds[i].name;
+
+ if (i == 4) { /* Setting for LED in core module */
+ led->cdev.brightness_set = cm_led_set;
+ led->cdev.brightness_get = cm_led_get;
+ } else {
+ led->cdev.brightness_set = integrator_led_set;
+ led->cdev.brightness_get = integrator_led_get;
+ }
+
+ led->cdev.default_trigger = integrator_leds[i].trigger;
+ led->mask = BIT(i);
+
+ if (led_classdev_register(NULL, &led->cdev) < 0) {
+ kfree(led);
+ break;
+ }
+ }
return 0;
}
-core_initcall(leds_init);
+/*
+ * Since we may have triggers on any subsystem, defer registration
+ * until after subsystem_init.
+ */
+fs_initcall(integrator_leds_init);
--
1.7.5
^ permalink raw reply related [flat|nested] 49+ messages in thread
* [PATCH 10/18] mach-clps711x: retire custom LED code of P720T machine
2011-08-26 9:03 ` Bryan Wu
@ 2011-08-26 9:03 ` Bryan Wu
-1 siblings, 0 replies; 49+ messages in thread
From: Bryan Wu @ 2011-08-26 9:03 UTC (permalink / raw)
To: linux, linus.walleij, rpurdie, tony, jochen, linux,
nicolas.pitre, arnd, linux-arm-kernel, jamie, linux-kernel
Add tigger based LED driver into board file of P720T.
Remove old LED driver file.
Signed-off-by: Bryan Wu <bryan.wu@canonical.com>
---
arch/arm/mach-clps711x/Makefile | 2 -
arch/arm/mach-clps711x/include/mach/time.h | 2 -
arch/arm/mach-clps711x/p720t-leds.c | 67 ----------------------------
arch/arm/mach-clps711x/p720t.c | 60 +++++++++++++++++++++++++
arch/arm/mach-clps711x/time.c | 1 -
5 files changed, 60 insertions(+), 72 deletions(-)
delete mode 100644 arch/arm/mach-clps711x/p720t-leds.c
diff --git a/arch/arm/mach-clps711x/Makefile b/arch/arm/mach-clps711x/Makefile
index 4a19731..af9dcce 100644
--- a/arch/arm/mach-clps711x/Makefile
+++ b/arch/arm/mach-clps711x/Makefile
@@ -16,5 +16,3 @@ obj-$(CONFIG_ARCH_CLEP7312) += clep7312.o
obj-$(CONFIG_ARCH_EDB7211) += edb7211-arch.o edb7211-mm.o
obj-$(CONFIG_ARCH_FORTUNET) += fortunet.o
obj-$(CONFIG_ARCH_P720T) += p720t.o
-leds-$(CONFIG_ARCH_P720T) += p720t-leds.o
-obj-$(CONFIG_LEDS) += $(leds-y)
diff --git a/arch/arm/mach-clps711x/include/mach/time.h b/arch/arm/mach-clps711x/include/mach/time.h
index 61fef91..bafc325 100644
--- a/arch/arm/mach-clps711x/include/mach/time.h
+++ b/arch/arm/mach-clps711x/include/mach/time.h
@@ -17,7 +17,6 @@
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
-#include <asm/leds.h>
#include <asm/hardware/clps7111.h>
extern void clps711x_setup_timer(void);
@@ -29,7 +28,6 @@ static irqreturn_t
p720t_timer_interrupt(int irq, void *dev_id)
{
struct pt_regs *regs = get_irq_regs();
- do_leds();
xtime_update(1);
#ifndef CONFIG_SMP
update_process_times(user_mode(regs));
diff --git a/arch/arm/mach-clps711x/p720t-leds.c b/arch/arm/mach-clps711x/p720t-leds.c
deleted file mode 100644
index 1512144..0000000
--- a/arch/arm/mach-clps711x/p720t-leds.c
+++ /dev/null
@@ -1,67 +0,0 @@
-/*
- * linux/arch/arm/mach-clps711x/leds.c
- *
- * Integrator LED control routines
- *
- * Copyright (C) 2000 Deep Blue Solutions Ltd
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- */
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/io.h>
-
-#include <mach/hardware.h>
-#include <asm/leds.h>
-#include <asm/system.h>
-#include <asm/mach-types.h>
-
-#include <asm/hardware/clps7111.h>
-#include <asm/hardware/ep7212.h>
-
-static void p720t_leds_event(led_event_t ledevt)
-{
- unsigned long flags;
- u32 pddr;
-
- local_irq_save(flags);
- switch(ledevt) {
- case led_idle_start:
- break;
-
- case led_idle_end:
- break;
-
- case led_timer:
- pddr = clps_readb(PDDR);
- clps_writeb(pddr ^ 1, PDDR);
- break;
-
- default:
- break;
- }
-
- local_irq_restore(flags);
-}
-
-static int __init leds_init(void)
-{
- if (machine_is_p720t())
- leds_event = p720t_leds_event;
-
- return 0;
-}
-
-arch_initcall(leds_init);
diff --git a/arch/arm/mach-clps711x/p720t.c b/arch/arm/mach-clps711x/p720t.c
index cefbce0..13fd262 100644
--- a/arch/arm/mach-clps711x/p720t.c
+++ b/arch/arm/mach-clps711x/p720t.c
@@ -23,6 +23,8 @@
#include <linux/string.h>
#include <linux/mm.h>
#include <linux/io.h>
+#include <linux/slab.h>
+#include <linux/leds.h>
#include <mach/hardware.h>
#include <asm/pgtable.h>
@@ -34,6 +36,8 @@
#include <asm/mach/map.h>
#include <mach/syspld.h>
+#include <asm/hardware/clps7111.h>
+
#include "common.h"
/*
@@ -121,3 +125,59 @@ static int p720t_hw_init(void)
__initcall(p720t_hw_init);
+/*
+ * LED controled by CPLD
+ */
+static void p720t_led_set(struct led_classdev *cdev,
+ enum led_brightness b)
+{
+ u8 reg = clps_readb(PDDR);
+
+ if (b != LED_OFF)
+ reg |= 0x1;
+ else
+ reg &= ~0x1;
+
+ clps_writeb(reg, PDDR);
+}
+
+static enum led_brightness p720t_led_get(struct led_classdev *cdev)
+{
+ u8 reg = clps_readb(PDDR);
+
+ return (reg & 0x1) ? LED_FULL : LED_OFF;
+}
+
+static int __init p720t_leds_init(void)
+{
+
+ struct led_classdev *cdev;
+ int ret;
+
+ if (!machine_is_p720t())
+ return -ENODEV;
+
+ cdev = kzalloc(sizeof(*cdev), GFP_KERNEL);
+ if (!cdev)
+ return -ENOMEM;
+
+ cdev->name = "p720t:0";
+ cdev->brightness_set = p720t_led_set;
+ cdev->brightness_get = p720t_led_get;
+ cdev->default_trigger = "heartbeat";
+
+ ret = led_classdev_register(NULL, cdev);
+ if (ret < 0) {
+ kfree(cdev);
+ return ret;
+ }
+
+ return 0;
+}
+
+/*
+ * Since we may have triggers on any subsystem, defer registration
+ * until after subsystem_init.
+ */
+fs_initcall(p720t_leds_init);
+
diff --git a/arch/arm/mach-clps711x/time.c b/arch/arm/mach-clps711x/time.c
index d581ef0..d79fe79 100644
--- a/arch/arm/mach-clps711x/time.c
+++ b/arch/arm/mach-clps711x/time.c
@@ -25,7 +25,6 @@
#include <mach/hardware.h>
#include <asm/irq.h>
-#include <asm/leds.h>
#include <asm/hardware/clps7111.h>
#include <asm/mach/time.h>
--
1.7.5
^ permalink raw reply related [flat|nested] 49+ messages in thread
* [PATCH 10/18] mach-clps711x: retire custom LED code of P720T machine
@ 2011-08-26 9:03 ` Bryan Wu
0 siblings, 0 replies; 49+ messages in thread
From: Bryan Wu @ 2011-08-26 9:03 UTC (permalink / raw)
To: linux-arm-kernel
Add tigger based LED driver into board file of P720T.
Remove old LED driver file.
Signed-off-by: Bryan Wu <bryan.wu@canonical.com>
---
arch/arm/mach-clps711x/Makefile | 2 -
arch/arm/mach-clps711x/include/mach/time.h | 2 -
arch/arm/mach-clps711x/p720t-leds.c | 67 ----------------------------
arch/arm/mach-clps711x/p720t.c | 60 +++++++++++++++++++++++++
arch/arm/mach-clps711x/time.c | 1 -
5 files changed, 60 insertions(+), 72 deletions(-)
delete mode 100644 arch/arm/mach-clps711x/p720t-leds.c
diff --git a/arch/arm/mach-clps711x/Makefile b/arch/arm/mach-clps711x/Makefile
index 4a19731..af9dcce 100644
--- a/arch/arm/mach-clps711x/Makefile
+++ b/arch/arm/mach-clps711x/Makefile
@@ -16,5 +16,3 @@ obj-$(CONFIG_ARCH_CLEP7312) += clep7312.o
obj-$(CONFIG_ARCH_EDB7211) += edb7211-arch.o edb7211-mm.o
obj-$(CONFIG_ARCH_FORTUNET) += fortunet.o
obj-$(CONFIG_ARCH_P720T) += p720t.o
-leds-$(CONFIG_ARCH_P720T) += p720t-leds.o
-obj-$(CONFIG_LEDS) += $(leds-y)
diff --git a/arch/arm/mach-clps711x/include/mach/time.h b/arch/arm/mach-clps711x/include/mach/time.h
index 61fef91..bafc325 100644
--- a/arch/arm/mach-clps711x/include/mach/time.h
+++ b/arch/arm/mach-clps711x/include/mach/time.h
@@ -17,7 +17,6 @@
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
-#include <asm/leds.h>
#include <asm/hardware/clps7111.h>
extern void clps711x_setup_timer(void);
@@ -29,7 +28,6 @@ static irqreturn_t
p720t_timer_interrupt(int irq, void *dev_id)
{
struct pt_regs *regs = get_irq_regs();
- do_leds();
xtime_update(1);
#ifndef CONFIG_SMP
update_process_times(user_mode(regs));
diff --git a/arch/arm/mach-clps711x/p720t-leds.c b/arch/arm/mach-clps711x/p720t-leds.c
deleted file mode 100644
index 1512144..0000000
--- a/arch/arm/mach-clps711x/p720t-leds.c
+++ /dev/null
@@ -1,67 +0,0 @@
-/*
- * linux/arch/arm/mach-clps711x/leds.c
- *
- * Integrator LED control routines
- *
- * Copyright (C) 2000 Deep Blue Solutions Ltd
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- */
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/io.h>
-
-#include <mach/hardware.h>
-#include <asm/leds.h>
-#include <asm/system.h>
-#include <asm/mach-types.h>
-
-#include <asm/hardware/clps7111.h>
-#include <asm/hardware/ep7212.h>
-
-static void p720t_leds_event(led_event_t ledevt)
-{
- unsigned long flags;
- u32 pddr;
-
- local_irq_save(flags);
- switch(ledevt) {
- case led_idle_start:
- break;
-
- case led_idle_end:
- break;
-
- case led_timer:
- pddr = clps_readb(PDDR);
- clps_writeb(pddr ^ 1, PDDR);
- break;
-
- default:
- break;
- }
-
- local_irq_restore(flags);
-}
-
-static int __init leds_init(void)
-{
- if (machine_is_p720t())
- leds_event = p720t_leds_event;
-
- return 0;
-}
-
-arch_initcall(leds_init);
diff --git a/arch/arm/mach-clps711x/p720t.c b/arch/arm/mach-clps711x/p720t.c
index cefbce0..13fd262 100644
--- a/arch/arm/mach-clps711x/p720t.c
+++ b/arch/arm/mach-clps711x/p720t.c
@@ -23,6 +23,8 @@
#include <linux/string.h>
#include <linux/mm.h>
#include <linux/io.h>
+#include <linux/slab.h>
+#include <linux/leds.h>
#include <mach/hardware.h>
#include <asm/pgtable.h>
@@ -34,6 +36,8 @@
#include <asm/mach/map.h>
#include <mach/syspld.h>
+#include <asm/hardware/clps7111.h>
+
#include "common.h"
/*
@@ -121,3 +125,59 @@ static int p720t_hw_init(void)
__initcall(p720t_hw_init);
+/*
+ * LED controled by CPLD
+ */
+static void p720t_led_set(struct led_classdev *cdev,
+ enum led_brightness b)
+{
+ u8 reg = clps_readb(PDDR);
+
+ if (b != LED_OFF)
+ reg |= 0x1;
+ else
+ reg &= ~0x1;
+
+ clps_writeb(reg, PDDR);
+}
+
+static enum led_brightness p720t_led_get(struct led_classdev *cdev)
+{
+ u8 reg = clps_readb(PDDR);
+
+ return (reg & 0x1) ? LED_FULL : LED_OFF;
+}
+
+static int __init p720t_leds_init(void)
+{
+
+ struct led_classdev *cdev;
+ int ret;
+
+ if (!machine_is_p720t())
+ return -ENODEV;
+
+ cdev = kzalloc(sizeof(*cdev), GFP_KERNEL);
+ if (!cdev)
+ return -ENOMEM;
+
+ cdev->name = "p720t:0";
+ cdev->brightness_set = p720t_led_set;
+ cdev->brightness_get = p720t_led_get;
+ cdev->default_trigger = "heartbeat";
+
+ ret = led_classdev_register(NULL, cdev);
+ if (ret < 0) {
+ kfree(cdev);
+ return ret;
+ }
+
+ return 0;
+}
+
+/*
+ * Since we may have triggers on any subsystem, defer registration
+ * until after subsystem_init.
+ */
+fs_initcall(p720t_leds_init);
+
diff --git a/arch/arm/mach-clps711x/time.c b/arch/arm/mach-clps711x/time.c
index d581ef0..d79fe79 100644
--- a/arch/arm/mach-clps711x/time.c
+++ b/arch/arm/mach-clps711x/time.c
@@ -25,7 +25,6 @@
#include <mach/hardware.h>
#include <asm/irq.h>
-#include <asm/leds.h>
#include <asm/hardware/clps7111.h>
#include <asm/mach/time.h>
--
1.7.5
^ permalink raw reply related [flat|nested] 49+ messages in thread
* [PATCH 11/18] mach-ebsa110: retire custom LED code
2011-08-26 9:03 ` Bryan Wu
@ 2011-08-26 9:03 ` Bryan Wu
-1 siblings, 0 replies; 49+ messages in thread
From: Bryan Wu @ 2011-08-26 9:03 UTC (permalink / raw)
To: linux, linus.walleij, rpurdie, tony, jochen, linux,
nicolas.pitre, arnd, linux-arm-kernel, jamie, linux-kernel
Signed-off-by: Bryan Wu <bryan.wu@canonical.com>
---
arch/arm/mach-ebsa110/Makefile | 4 +-
arch/arm/mach-ebsa110/leds.c | 80 ++++++++++++++++++++++++---------------
2 files changed, 50 insertions(+), 34 deletions(-)
diff --git a/arch/arm/mach-ebsa110/Makefile b/arch/arm/mach-ebsa110/Makefile
index 6520ac8..935e4af 100644
--- a/arch/arm/mach-ebsa110/Makefile
+++ b/arch/arm/mach-ebsa110/Makefile
@@ -4,9 +4,7 @@
# Object file lists.
-obj-y := core.o io.o
+obj-y := core.o io.o leds.o
obj-m :=
obj-n :=
obj- :=
-
-obj-$(CONFIG_LEDS) += leds.o
diff --git a/arch/arm/mach-ebsa110/leds.c b/arch/arm/mach-ebsa110/leds.c
index 6a6ea57..94b35fb 100644
--- a/arch/arm/mach-ebsa110/leds.c
+++ b/arch/arm/mach-ebsa110/leds.c
@@ -1,51 +1,69 @@
/*
- * linux/arch/arm/mach-ebsa110/leds.c
+ * Driver for the LED found on the EBSA110 machine
+ * Based on Versatile and RealView machine LED code
*
- * Copyright (C) 1998 Russell King
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * EBSA-110 LED control routines. We use the led as follows:
- *
- * - Red - toggles state every 50 timer interrupts
+ * License terms: GNU General Public License (GPL) version 2
+ * Author: Bryan Wu <bryan.wu@canonical.com>
*/
-#include <linux/module.h>
-#include <linux/spinlock.h>
+#include <linux/kernel.h>
#include <linux/init.h>
+#include <linux/io.h>
+#include <linux/slab.h>
+#include <linux/leds.h>
-#include <mach/hardware.h>
-#include <asm/leds.h>
-#include <asm/system.h>
#include <asm/mach-types.h>
-static spinlock_t leds_lock;
+#include <mach/hardware.h>
-static void ebsa110_leds_event(led_event_t ledevt)
+static void ebsa110_led_set(struct led_classdev *cdev,
+ enum led_brightness b)
{
- unsigned long flags;
+ u8 reg = __raw_readb(SOFT_BASE);
- spin_lock_irqsave(&leds_lock, flags);
+ if (b != LED_OFF)
+ reg |= 0x80;
+ else
+ reg &= ~0x80;
- switch(ledevt) {
- case led_timer:
- *(volatile unsigned char *)SOFT_BASE ^= 128;
- break;
+ __raw_writeb(reg, SOFT_BASE);
+}
- default:
- break;
- }
+static enum led_brightness ebsa110_led_get(struct led_classdev *cdev)
+{
+ u8 reg = __raw_readb(SOFT_BASE);
- spin_unlock_irqrestore(&leds_lock, flags);
+ return (reg & 0x80) ? LED_FULL : LED_OFF;
}
-static int __init leds_init(void)
+static int __init ebsa110_leds_init(void)
{
- if (machine_is_ebsa110())
- leds_event = ebsa110_leds_event;
+
+ struct led_classdev *cdev;
+ int ret;
+
+ if (!machine_is_ebsa110())
+ return -ENODEV;
+
+ cdev = kzalloc(sizeof(*cdev), GFP_KERNEL);
+ if (!cdev)
+ return -ENOMEM;
+
+ cdev->name = "ebsa110:0";
+ cdev->brightness_set = ebsa110_led_set;
+ cdev->brightness_get = ebsa110_led_get;
+ cdev->default_trigger = "heartbeat";
+
+ ret = led_classdev_register(NULL, cdev);
+ if (ret < 0) {
+ kfree(cdev);
+ return ret;
+ }
return 0;
}
-__initcall(leds_init);
+/*
+ * Since we may have triggers on any subsystem, defer registration
+ * until after subsystem_init.
+ */
+fs_initcall(ebsa110_leds_init);
--
1.7.5
^ permalink raw reply related [flat|nested] 49+ messages in thread
* [PATCH 11/18] mach-ebsa110: retire custom LED code
@ 2011-08-26 9:03 ` Bryan Wu
0 siblings, 0 replies; 49+ messages in thread
From: Bryan Wu @ 2011-08-26 9:03 UTC (permalink / raw)
To: linux-arm-kernel
Signed-off-by: Bryan Wu <bryan.wu@canonical.com>
---
arch/arm/mach-ebsa110/Makefile | 4 +-
arch/arm/mach-ebsa110/leds.c | 80 ++++++++++++++++++++++++---------------
2 files changed, 50 insertions(+), 34 deletions(-)
diff --git a/arch/arm/mach-ebsa110/Makefile b/arch/arm/mach-ebsa110/Makefile
index 6520ac8..935e4af 100644
--- a/arch/arm/mach-ebsa110/Makefile
+++ b/arch/arm/mach-ebsa110/Makefile
@@ -4,9 +4,7 @@
# Object file lists.
-obj-y := core.o io.o
+obj-y := core.o io.o leds.o
obj-m :=
obj-n :=
obj- :=
-
-obj-$(CONFIG_LEDS) += leds.o
diff --git a/arch/arm/mach-ebsa110/leds.c b/arch/arm/mach-ebsa110/leds.c
index 6a6ea57..94b35fb 100644
--- a/arch/arm/mach-ebsa110/leds.c
+++ b/arch/arm/mach-ebsa110/leds.c
@@ -1,51 +1,69 @@
/*
- * linux/arch/arm/mach-ebsa110/leds.c
+ * Driver for the LED found on the EBSA110 machine
+ * Based on Versatile and RealView machine LED code
*
- * Copyright (C) 1998 Russell King
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * EBSA-110 LED control routines. We use the led as follows:
- *
- * - Red - toggles state every 50 timer interrupts
+ * License terms: GNU General Public License (GPL) version 2
+ * Author: Bryan Wu <bryan.wu@canonical.com>
*/
-#include <linux/module.h>
-#include <linux/spinlock.h>
+#include <linux/kernel.h>
#include <linux/init.h>
+#include <linux/io.h>
+#include <linux/slab.h>
+#include <linux/leds.h>
-#include <mach/hardware.h>
-#include <asm/leds.h>
-#include <asm/system.h>
#include <asm/mach-types.h>
-static spinlock_t leds_lock;
+#include <mach/hardware.h>
-static void ebsa110_leds_event(led_event_t ledevt)
+static void ebsa110_led_set(struct led_classdev *cdev,
+ enum led_brightness b)
{
- unsigned long flags;
+ u8 reg = __raw_readb(SOFT_BASE);
- spin_lock_irqsave(&leds_lock, flags);
+ if (b != LED_OFF)
+ reg |= 0x80;
+ else
+ reg &= ~0x80;
- switch(ledevt) {
- case led_timer:
- *(volatile unsigned char *)SOFT_BASE ^= 128;
- break;
+ __raw_writeb(reg, SOFT_BASE);
+}
- default:
- break;
- }
+static enum led_brightness ebsa110_led_get(struct led_classdev *cdev)
+{
+ u8 reg = __raw_readb(SOFT_BASE);
- spin_unlock_irqrestore(&leds_lock, flags);
+ return (reg & 0x80) ? LED_FULL : LED_OFF;
}
-static int __init leds_init(void)
+static int __init ebsa110_leds_init(void)
{
- if (machine_is_ebsa110())
- leds_event = ebsa110_leds_event;
+
+ struct led_classdev *cdev;
+ int ret;
+
+ if (!machine_is_ebsa110())
+ return -ENODEV;
+
+ cdev = kzalloc(sizeof(*cdev), GFP_KERNEL);
+ if (!cdev)
+ return -ENOMEM;
+
+ cdev->name = "ebsa110:0";
+ cdev->brightness_set = ebsa110_led_set;
+ cdev->brightness_get = ebsa110_led_get;
+ cdev->default_trigger = "heartbeat";
+
+ ret = led_classdev_register(NULL, cdev);
+ if (ret < 0) {
+ kfree(cdev);
+ return ret;
+ }
return 0;
}
-__initcall(leds_init);
+/*
+ * Since we may have triggers on any subsystem, defer registration
+ * until after subsystem_init.
+ */
+fs_initcall(ebsa110_leds_init);
--
1.7.5
^ permalink raw reply related [flat|nested] 49+ messages in thread
* [PATCH 12/18] mach-footbridge: retire custom LED code
2011-08-26 9:03 ` Bryan Wu
@ 2011-08-26 9:03 ` Bryan Wu
-1 siblings, 0 replies; 49+ messages in thread
From: Bryan Wu @ 2011-08-26 9:03 UTC (permalink / raw)
To: linux, linus.walleij, rpurdie, tony, jochen, linux,
nicolas.pitre, arnd, linux-arm-kernel, jamie, linux-kernel
Signed-off-by: Bryan Wu <bryan.wu@canonical.com>
---
| 4 -
| 139 ------------------------
| 79 ++++++++++++++
| 1 -
| 110 ++++++++++++++++---
| 139 ------------------------
6 files changed, 175 insertions(+), 297 deletions(-)
delete mode 100644 arch/arm/mach-footbridge/ebsa285-leds.c
delete mode 100644 arch/arm/mach-footbridge/netwinder-leds.c
--git a/arch/arm/mach-footbridge/Makefile b/arch/arm/mach-footbridge/Makefile
index 3afb1b2..0b64dd4 100644
--- a/arch/arm/mach-footbridge/Makefile
+++ b/arch/arm/mach-footbridge/Makefile
@@ -14,15 +14,11 @@ pci-$(CONFIG_ARCH_EBSA285_HOST) += ebsa285-pci.o
pci-$(CONFIG_ARCH_NETWINDER) += netwinder-pci.o
pci-$(CONFIG_ARCH_PERSONAL_SERVER) += personal-pci.o
-leds-$(CONFIG_ARCH_EBSA285) += ebsa285-leds.o
-leds-$(CONFIG_ARCH_NETWINDER) += netwinder-leds.o
-
obj-$(CONFIG_ARCH_CATS) += cats-hw.o isa-timer.o
obj-$(CONFIG_ARCH_EBSA285) += ebsa285.o dc21285-timer.o
obj-$(CONFIG_ARCH_NETWINDER) += netwinder-hw.o isa-timer.o
obj-$(CONFIG_ARCH_PERSONAL_SERVER) += personal.o dc21285-timer.o
obj-$(CONFIG_PCI) +=$(pci-y)
-obj-$(CONFIG_LEDS) +=$(leds-y)
obj-$(CONFIG_ISA) += isa.o isa-rtc.o
diff --git a/arch/arm/mach-footbridge/ebsa285-leds.c b/arch/arm/mach-footbridge/ebsa285-leds.c
deleted file mode 100644
index 4e10090..0000000
--- a/arch/arm/mach-footbridge/ebsa285-leds.c
+++ /dev/null
@@ -1,139 +0,0 @@
-/*
- * linux/arch/arm/mach-footbridge/ebsa285-leds.c
- *
- * Copyright (C) 1998-1999 Russell King
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- * EBSA-285 control routines.
- *
- * The EBSA-285 uses the leds as follows:
- * - Green - toggles state every 50 timer interrupts
- * - Amber - On if system is not idle
- * - Red - currently unused
- *
- * Changelog:
- * 02-05-1999 RMK Various cleanups
- */
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/spinlock.h>
-
-#include <mach/hardware.h>
-#include <asm/leds.h>
-#include <asm/mach-types.h>
-#include <asm/system.h>
-
-#define LED_STATE_ENABLED 1
-#define LED_STATE_CLAIMED 2
-static char led_state;
-static char hw_led_state;
-
-static DEFINE_SPINLOCK(leds_lock);
-
-static void ebsa285_leds_event(led_event_t evt)
-{
- unsigned long flags;
-
- spin_lock_irqsave(&leds_lock, flags);
-
- switch (evt) {
- case led_start:
- hw_led_state = XBUS_LED_RED | XBUS_LED_GREEN;
-#ifndef CONFIG_LEDS_CPU
- hw_led_state |= XBUS_LED_AMBER;
-#endif
- led_state |= LED_STATE_ENABLED;
- break;
-
- case led_stop:
- led_state &= ~LED_STATE_ENABLED;
- break;
-
- case led_claim:
- led_state |= LED_STATE_CLAIMED;
- hw_led_state = XBUS_LED_RED | XBUS_LED_GREEN | XBUS_LED_AMBER;
- break;
-
- case led_release:
- led_state &= ~LED_STATE_CLAIMED;
- hw_led_state = XBUS_LED_RED | XBUS_LED_GREEN | XBUS_LED_AMBER;
- break;
-
-#ifdef CONFIG_LEDS_TIMER
- case led_timer:
- if (!(led_state & LED_STATE_CLAIMED))
- hw_led_state ^= XBUS_LED_GREEN;
- break;
-#endif
-
-#ifdef CONFIG_LEDS_CPU
- case led_idle_start:
- if (!(led_state & LED_STATE_CLAIMED))
- hw_led_state |= XBUS_LED_AMBER;
- break;
-
- case led_idle_end:
- if (!(led_state & LED_STATE_CLAIMED))
- hw_led_state &= ~XBUS_LED_AMBER;
- break;
-#endif
-
- case led_halted:
- if (!(led_state & LED_STATE_CLAIMED))
- hw_led_state &= ~XBUS_LED_RED;
- break;
-
- case led_green_on:
- if (led_state & LED_STATE_CLAIMED)
- hw_led_state &= ~XBUS_LED_GREEN;
- break;
-
- case led_green_off:
- if (led_state & LED_STATE_CLAIMED)
- hw_led_state |= XBUS_LED_GREEN;
- break;
-
- case led_amber_on:
- if (led_state & LED_STATE_CLAIMED)
- hw_led_state &= ~XBUS_LED_AMBER;
- break;
-
- case led_amber_off:
- if (led_state & LED_STATE_CLAIMED)
- hw_led_state |= XBUS_LED_AMBER;
- break;
-
- case led_red_on:
- if (led_state & LED_STATE_CLAIMED)
- hw_led_state &= ~XBUS_LED_RED;
- break;
-
- case led_red_off:
- if (led_state & LED_STATE_CLAIMED)
- hw_led_state |= XBUS_LED_RED;
- break;
-
- default:
- break;
- }
-
- if (led_state & LED_STATE_ENABLED)
- *XBUS_LEDS = hw_led_state;
-
- spin_unlock_irqrestore(&leds_lock, flags);
-}
-
-static int __init leds_init(void)
-{
- if (machine_is_ebsa285())
- leds_event = ebsa285_leds_event;
-
- leds_event(led_start);
-
- return 0;
-}
-
-__initcall(leds_init);
--git a/arch/arm/mach-footbridge/ebsa285.c b/arch/arm/mach-footbridge/ebsa285.c
index 2ef69ff..465a738 100644
--- a/arch/arm/mach-footbridge/ebsa285.c
+++ b/arch/arm/mach-footbridge/ebsa285.c
@@ -5,6 +5,8 @@
*/
#include <linux/init.h>
#include <linux/spinlock.h>
+#include <linux/slab.h>
+#include <linux/leds.h>
#include <asm/hardware/dec21285.h>
#include <asm/mach-types.h>
@@ -13,6 +15,83 @@
#include "common.h"
+/* LEDs */
+struct ebsa285_led {
+ struct led_classdev cdev;
+ u8 mask;
+};
+
+/*
+ * The triggers lines up below will only be used if the
+ * LED triggers are compiled in.
+ */
+static const struct {
+ const char *name;
+ const char *trigger;
+} ebsa285_leds[] = {
+ { "ebsa285:amber", "heartbeat", },
+ { "ebsa285:green", "cpu0", },
+ { "ebsa285:red",},
+};
+
+static void ebsa285_led_set(struct led_classdev *cdev,
+ enum led_brightness b)
+{
+ struct ebsa285_led *led = container_of(cdev,
+ struct ebsa285_led, cdev);
+
+ if (b != LED_OFF)
+ *XBUS_LEDS |= led->mask;
+ else
+ *XBUS_LEDS &= ~led->mask;
+}
+
+static enum led_brightness ebsa285_led_get(struct led_classdev *cdev)
+{
+ struct ebsa285_led *led = container_of(cdev,
+ struct ebsa285_led, cdev);
+
+ return (*XBUS_LEDS & led->mask) ? LED_FULL : LED_OFF;
+}
+
+static int __init ebsa285_leds_init(void)
+{
+ int i;
+
+ if (machine_is_ebsa285())
+ return -ENODEV;
+
+ /* 3 LEDS All ON */
+ *XBUS_LEDS |= XBUS_LED_AMBER | XBUS_LED_GREEN | XBUS_LED_RED;
+
+ for (i = 0; i < ARRAY_SIZE(ebsa285_leds); i++) {
+ struct ebsa285_led *led;
+
+ led = kzalloc(sizeof(*led), GFP_KERNEL);
+ if (!led)
+ break;
+
+ led->cdev.name = ebsa285_leds[i].name;
+ led->cdev.brightness_set = ebsa285_led_set;
+ led->cdev.brightness_get = ebsa285_led_get;
+ led->cdev.default_trigger = ebsa285_leds[i].trigger;
+ led->mask = BIT(i);
+
+ if (led_classdev_register(NULL, &led->cdev) < 0) {
+ kfree(led);
+ break;
+ }
+ }
+
+ return 0;
+}
+
+/*
+ * Since we may have triggers on any subsystem, defer registration
+ * until after subsystem_init.
+ */
+fs_initcall(ebsa285_leds_init);
+
MACHINE_START(EBSA285, "EBSA285")
/* Maintainer: Russell King */
.boot_params = 0x00000100,
--git a/arch/arm/mach-footbridge/include/mach/system.h b/arch/arm/mach-footbridge/include/mach/system.h
index 0b29315..c026efa 100644
--- a/arch/arm/mach-footbridge/include/mach/system.h
+++ b/arch/arm/mach-footbridge/include/mach/system.h
@@ -10,7 +10,6 @@
#include <linux/io.h>
#include <asm/hardware/dec21285.h>
#include <mach/hardware.h>
-#include <asm/leds.h>
#include <asm/mach-types.h>
static inline void arch_idle(void)
--git a/arch/arm/mach-footbridge/netwinder-hw.c b/arch/arm/mach-footbridge/netwinder-hw.c
index 06e514f..e5450fe 100644
--- a/arch/arm/mach-footbridge/netwinder-hw.c
+++ b/arch/arm/mach-footbridge/netwinder-hw.c
@@ -12,9 +12,10 @@
#include <linux/init.h>
#include <linux/io.h>
#include <linux/spinlock.h>
+#include <linux/slab.h>
+#include <linux/leds.h>
#include <asm/hardware/dec21285.h>
-#include <asm/leds.h>
#include <asm/mach-types.h>
#include <asm/setup.h>
@@ -26,13 +27,6 @@
#define GP1_IO_BASE 0x338
#define GP2_IO_BASE 0x33a
-
-#ifdef CONFIG_LEDS
-#define DEFAULT_LEDS 0
-#else
-#define DEFAULT_LEDS GPIO_GREEN_LED
-#endif
-
/*
* Winbond WB83977F accessibility stuff
*/
@@ -610,15 +604,9 @@ static void __init rwa010_init(void)
static int __init nw_hw_init(void)
{
if (machine_is_netwinder()) {
- unsigned long flags;
-
wb977_init();
cpld_init();
rwa010_init();
-
- spin_lock_irqsave(&nw_gpio_lock, flags);
- nw_gpio_modify_op(GPIO_RED_LED|GPIO_GREEN_LED, DEFAULT_LEDS);
- spin_unlock_irqrestore(&nw_gpio_lock, flags);
}
return 0;
}
@@ -646,6 +634,100 @@ fixup_netwinder(struct machine_desc *desc, struct tag *tags,
#endif
}
+/* LEDs */
+struct netwinder_led {
+ struct led_classdev cdev;
+ u8 mask;
+};
+
+/*
+ * The triggers lines up below will only be used if the
+ * LED triggers are compiled in.
+ */
+static const struct {
+ const char *name;
+ const char *trigger;
+} netwinder_leds[] = {
+ { "netwinder:green", "heartbeat", },
+ { "netwinder:red", "cpu0", },
+};
+
+/*
+ * The LED control in Netwinder is reversed:
+ * - setting bit means turn off LED
+ * - clearing bit means turn on LED
+ */
+static void netwinder_led_set(struct led_classdev *cdev,
+ enum led_brightness b)
+{
+ struct netwinder_led *led = container_of(cdev,
+ struct netwinder_led, cdev);
+ unsigned long flags;
+ u32 reg;
+
+ spin_lock_irqsave(&nw_gpio_lock, flags);
+ reg = nw_gpio_read();
+ if (b != LED_OFF)
+ reg &= ~led->mask;
+ else
+ reg |= led->mask;
+ nw_gpio_modify_op(led->mask, reg);
+ spin_unlock_irqrestore(&nw_gpio_lock, flags);
+}
+
+static enum led_brightness netwinder_led_get(struct led_classdev *cdev)
+{
+ struct netwinder_led *led = container_of(cdev,
+ struct netwinder_led, cdev);
+ unsigned long flags;
+ u32 reg;
+
+ spin_lock_irqsave(&nw_gpio_lock, flags);
+ reg = nw_gpio_read();
+ spin_unlock_irqrestore(&nw_gpio_lock, flags);
+
+ return (reg & led->mask) ? LED_OFF : LED_FULL;
+}
+
+static int __init netwinder_leds_init(void)
+{
+ int i;
+
+ if (!machine_is_netwinder())
+ return -ENODEV;
+
+ for (i = 0; i < ARRAY_SIZE(netwinder_leds); i++) {
+ struct netwinder_led *led;
+
+ led = kzalloc(sizeof(*led), GFP_KERNEL);
+ if (!led)
+ break;
+
+ led->cdev.name = netwinder_leds[i].name;
+ led->cdev.brightness_set = netwinder_led_set;
+ led->cdev.brightness_get = netwinder_led_get;
+ led->cdev.default_trigger = netwinder_leds[i].trigger;
+
+ if (i == 0)
+ led->mask = GPIO_GREEN_LED;
+ else
+ led->mask = GPIO_RED_LED;
+
+ if (led_classdev_register(NULL, &led->cdev) < 0) {
+ kfree(led);
+ break;
+ }
+ }
+
+ return 0;
+}
+
+/*
+ * Since we may have triggers on any subsystem, defer registration
+ * until after subsystem_init.
+ */
+fs_initcall(netwinder_leds_init);
+
MACHINE_START(NETWINDER, "Rebel-NetWinder")
/* Maintainer: Russell King/Rebel.com */
.boot_params = 0x00000100,
diff --git a/arch/arm/mach-footbridge/netwinder-leds.c b/arch/arm/mach-footbridge/netwinder-leds.c
deleted file mode 100644
index 00269fe..0000000
--- a/arch/arm/mach-footbridge/netwinder-leds.c
+++ /dev/null
@@ -1,139 +0,0 @@
-/*
- * linux/arch/arm/mach-footbridge/netwinder-leds.c
- *
- * Copyright (C) 1998-1999 Russell King
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * NetWinder LED control routines.
- *
- * The Netwinder uses the leds as follows:
- * - Green - toggles state every 50 timer interrupts
- * - Red - On if the system is not idle
- *
- * Changelog:
- * 02-05-1999 RMK Various cleanups
- */
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/spinlock.h>
-
-#include <mach/hardware.h>
-#include <asm/leds.h>
-#include <asm/mach-types.h>
-#include <asm/system.h>
-
-#define LED_STATE_ENABLED 1
-#define LED_STATE_CLAIMED 2
-static char led_state;
-static char hw_led_state;
-
-static DEFINE_SPINLOCK(leds_lock);
-
-static void netwinder_leds_event(led_event_t evt)
-{
- unsigned long flags;
-
- spin_lock_irqsave(&leds_lock, flags);
-
- switch (evt) {
- case led_start:
- led_state |= LED_STATE_ENABLED;
- hw_led_state = GPIO_GREEN_LED;
- break;
-
- case led_stop:
- led_state &= ~LED_STATE_ENABLED;
- break;
-
- case led_claim:
- led_state |= LED_STATE_CLAIMED;
- hw_led_state = 0;
- break;
-
- case led_release:
- led_state &= ~LED_STATE_CLAIMED;
- hw_led_state = 0;
- break;
-
-#ifdef CONFIG_LEDS_TIMER
- case led_timer:
- if (!(led_state & LED_STATE_CLAIMED))
- hw_led_state ^= GPIO_GREEN_LED;
- break;
-#endif
-
-#ifdef CONFIG_LEDS_CPU
- case led_idle_start:
- if (!(led_state & LED_STATE_CLAIMED))
- hw_led_state &= ~GPIO_RED_LED;
- break;
-
- case led_idle_end:
- if (!(led_state & LED_STATE_CLAIMED))
- hw_led_state |= GPIO_RED_LED;
- break;
-#endif
-
- case led_halted:
- if (!(led_state & LED_STATE_CLAIMED))
- hw_led_state |= GPIO_RED_LED;
- break;
-
- case led_green_on:
- if (led_state & LED_STATE_CLAIMED)
- hw_led_state |= GPIO_GREEN_LED;
- break;
-
- case led_green_off:
- if (led_state & LED_STATE_CLAIMED)
- hw_led_state &= ~GPIO_GREEN_LED;
- break;
-
- case led_amber_on:
- if (led_state & LED_STATE_CLAIMED)
- hw_led_state |= GPIO_GREEN_LED | GPIO_RED_LED;
- break;
-
- case led_amber_off:
- if (led_state & LED_STATE_CLAIMED)
- hw_led_state &= ~(GPIO_GREEN_LED | GPIO_RED_LED);
- break;
-
- case led_red_on:
- if (led_state & LED_STATE_CLAIMED)
- hw_led_state |= GPIO_RED_LED;
- break;
-
- case led_red_off:
- if (led_state & LED_STATE_CLAIMED)
- hw_led_state &= ~GPIO_RED_LED;
- break;
-
- default:
- break;
- }
-
- spin_unlock_irqrestore(&leds_lock, flags);
-
- if (led_state & LED_STATE_ENABLED) {
- spin_lock_irqsave(&nw_gpio_lock, flags);
- nw_gpio_modify_op(GPIO_RED_LED | GPIO_GREEN_LED, hw_led_state);
- spin_unlock_irqrestore(&nw_gpio_lock, flags);
- }
-}
-
-static int __init leds_init(void)
-{
- if (machine_is_netwinder())
- leds_event = netwinder_leds_event;
-
- leds_event(led_start);
-
- return 0;
-}
-
-__initcall(leds_init);
--
1.7.5
^ permalink raw reply related [flat|nested] 49+ messages in thread
* [PATCH 12/18] mach-footbridge: retire custom LED code
@ 2011-08-26 9:03 ` Bryan Wu
0 siblings, 0 replies; 49+ messages in thread
From: Bryan Wu @ 2011-08-26 9:03 UTC (permalink / raw)
To: linux-arm-kernel
Signed-off-by: Bryan Wu <bryan.wu@canonical.com>
---
| 4 -
| 139 ------------------------
| 79 ++++++++++++++
| 1 -
| 110 ++++++++++++++++---
| 139 ------------------------
6 files changed, 175 insertions(+), 297 deletions(-)
delete mode 100644 arch/arm/mach-footbridge/ebsa285-leds.c
delete mode 100644 arch/arm/mach-footbridge/netwinder-leds.c
--git a/arch/arm/mach-footbridge/Makefile b/arch/arm/mach-footbridge/Makefile
index 3afb1b2..0b64dd4 100644
--- a/arch/arm/mach-footbridge/Makefile
+++ b/arch/arm/mach-footbridge/Makefile
@@ -14,15 +14,11 @@ pci-$(CONFIG_ARCH_EBSA285_HOST) += ebsa285-pci.o
pci-$(CONFIG_ARCH_NETWINDER) += netwinder-pci.o
pci-$(CONFIG_ARCH_PERSONAL_SERVER) += personal-pci.o
-leds-$(CONFIG_ARCH_EBSA285) += ebsa285-leds.o
-leds-$(CONFIG_ARCH_NETWINDER) += netwinder-leds.o
-
obj-$(CONFIG_ARCH_CATS) += cats-hw.o isa-timer.o
obj-$(CONFIG_ARCH_EBSA285) += ebsa285.o dc21285-timer.o
obj-$(CONFIG_ARCH_NETWINDER) += netwinder-hw.o isa-timer.o
obj-$(CONFIG_ARCH_PERSONAL_SERVER) += personal.o dc21285-timer.o
obj-$(CONFIG_PCI) +=$(pci-y)
-obj-$(CONFIG_LEDS) +=$(leds-y)
obj-$(CONFIG_ISA) += isa.o isa-rtc.o
diff --git a/arch/arm/mach-footbridge/ebsa285-leds.c b/arch/arm/mach-footbridge/ebsa285-leds.c
deleted file mode 100644
index 4e10090..0000000
--- a/arch/arm/mach-footbridge/ebsa285-leds.c
+++ /dev/null
@@ -1,139 +0,0 @@
-/*
- * linux/arch/arm/mach-footbridge/ebsa285-leds.c
- *
- * Copyright (C) 1998-1999 Russell King
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- * EBSA-285 control routines.
- *
- * The EBSA-285 uses the leds as follows:
- * - Green - toggles state every 50 timer interrupts
- * - Amber - On if system is not idle
- * - Red - currently unused
- *
- * Changelog:
- * 02-05-1999 RMK Various cleanups
- */
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/spinlock.h>
-
-#include <mach/hardware.h>
-#include <asm/leds.h>
-#include <asm/mach-types.h>
-#include <asm/system.h>
-
-#define LED_STATE_ENABLED 1
-#define LED_STATE_CLAIMED 2
-static char led_state;
-static char hw_led_state;
-
-static DEFINE_SPINLOCK(leds_lock);
-
-static void ebsa285_leds_event(led_event_t evt)
-{
- unsigned long flags;
-
- spin_lock_irqsave(&leds_lock, flags);
-
- switch (evt) {
- case led_start:
- hw_led_state = XBUS_LED_RED | XBUS_LED_GREEN;
-#ifndef CONFIG_LEDS_CPU
- hw_led_state |= XBUS_LED_AMBER;
-#endif
- led_state |= LED_STATE_ENABLED;
- break;
-
- case led_stop:
- led_state &= ~LED_STATE_ENABLED;
- break;
-
- case led_claim:
- led_state |= LED_STATE_CLAIMED;
- hw_led_state = XBUS_LED_RED | XBUS_LED_GREEN | XBUS_LED_AMBER;
- break;
-
- case led_release:
- led_state &= ~LED_STATE_CLAIMED;
- hw_led_state = XBUS_LED_RED | XBUS_LED_GREEN | XBUS_LED_AMBER;
- break;
-
-#ifdef CONFIG_LEDS_TIMER
- case led_timer:
- if (!(led_state & LED_STATE_CLAIMED))
- hw_led_state ^= XBUS_LED_GREEN;
- break;
-#endif
-
-#ifdef CONFIG_LEDS_CPU
- case led_idle_start:
- if (!(led_state & LED_STATE_CLAIMED))
- hw_led_state |= XBUS_LED_AMBER;
- break;
-
- case led_idle_end:
- if (!(led_state & LED_STATE_CLAIMED))
- hw_led_state &= ~XBUS_LED_AMBER;
- break;
-#endif
-
- case led_halted:
- if (!(led_state & LED_STATE_CLAIMED))
- hw_led_state &= ~XBUS_LED_RED;
- break;
-
- case led_green_on:
- if (led_state & LED_STATE_CLAIMED)
- hw_led_state &= ~XBUS_LED_GREEN;
- break;
-
- case led_green_off:
- if (led_state & LED_STATE_CLAIMED)
- hw_led_state |= XBUS_LED_GREEN;
- break;
-
- case led_amber_on:
- if (led_state & LED_STATE_CLAIMED)
- hw_led_state &= ~XBUS_LED_AMBER;
- break;
-
- case led_amber_off:
- if (led_state & LED_STATE_CLAIMED)
- hw_led_state |= XBUS_LED_AMBER;
- break;
-
- case led_red_on:
- if (led_state & LED_STATE_CLAIMED)
- hw_led_state &= ~XBUS_LED_RED;
- break;
-
- case led_red_off:
- if (led_state & LED_STATE_CLAIMED)
- hw_led_state |= XBUS_LED_RED;
- break;
-
- default:
- break;
- }
-
- if (led_state & LED_STATE_ENABLED)
- *XBUS_LEDS = hw_led_state;
-
- spin_unlock_irqrestore(&leds_lock, flags);
-}
-
-static int __init leds_init(void)
-{
- if (machine_is_ebsa285())
- leds_event = ebsa285_leds_event;
-
- leds_event(led_start);
-
- return 0;
-}
-
-__initcall(leds_init);
--git a/arch/arm/mach-footbridge/ebsa285.c b/arch/arm/mach-footbridge/ebsa285.c
index 2ef69ff..465a738 100644
--- a/arch/arm/mach-footbridge/ebsa285.c
+++ b/arch/arm/mach-footbridge/ebsa285.c
@@ -5,6 +5,8 @@
*/
#include <linux/init.h>
#include <linux/spinlock.h>
+#include <linux/slab.h>
+#include <linux/leds.h>
#include <asm/hardware/dec21285.h>
#include <asm/mach-types.h>
@@ -13,6 +15,83 @@
#include "common.h"
+/* LEDs */
+struct ebsa285_led {
+ struct led_classdev cdev;
+ u8 mask;
+};
+
+/*
+ * The triggers lines up below will only be used if the
+ * LED triggers are compiled in.
+ */
+static const struct {
+ const char *name;
+ const char *trigger;
+} ebsa285_leds[] = {
+ { "ebsa285:amber", "heartbeat", },
+ { "ebsa285:green", "cpu0", },
+ { "ebsa285:red",},
+};
+
+static void ebsa285_led_set(struct led_classdev *cdev,
+ enum led_brightness b)
+{
+ struct ebsa285_led *led = container_of(cdev,
+ struct ebsa285_led, cdev);
+
+ if (b != LED_OFF)
+ *XBUS_LEDS |= led->mask;
+ else
+ *XBUS_LEDS &= ~led->mask;
+}
+
+static enum led_brightness ebsa285_led_get(struct led_classdev *cdev)
+{
+ struct ebsa285_led *led = container_of(cdev,
+ struct ebsa285_led, cdev);
+
+ return (*XBUS_LEDS & led->mask) ? LED_FULL : LED_OFF;
+}
+
+static int __init ebsa285_leds_init(void)
+{
+ int i;
+
+ if (machine_is_ebsa285())
+ return -ENODEV;
+
+ /* 3 LEDS All ON */
+ *XBUS_LEDS |= XBUS_LED_AMBER | XBUS_LED_GREEN | XBUS_LED_RED;
+
+ for (i = 0; i < ARRAY_SIZE(ebsa285_leds); i++) {
+ struct ebsa285_led *led;
+
+ led = kzalloc(sizeof(*led), GFP_KERNEL);
+ if (!led)
+ break;
+
+ led->cdev.name = ebsa285_leds[i].name;
+ led->cdev.brightness_set = ebsa285_led_set;
+ led->cdev.brightness_get = ebsa285_led_get;
+ led->cdev.default_trigger = ebsa285_leds[i].trigger;
+ led->mask = BIT(i);
+
+ if (led_classdev_register(NULL, &led->cdev) < 0) {
+ kfree(led);
+ break;
+ }
+ }
+
+ return 0;
+}
+
+/*
+ * Since we may have triggers on any subsystem, defer registration
+ * until after subsystem_init.
+ */
+fs_initcall(ebsa285_leds_init);
+
MACHINE_START(EBSA285, "EBSA285")
/* Maintainer: Russell King */
.boot_params = 0x00000100,
--git a/arch/arm/mach-footbridge/include/mach/system.h b/arch/arm/mach-footbridge/include/mach/system.h
index 0b29315..c026efa 100644
--- a/arch/arm/mach-footbridge/include/mach/system.h
+++ b/arch/arm/mach-footbridge/include/mach/system.h
@@ -10,7 +10,6 @@
#include <linux/io.h>
#include <asm/hardware/dec21285.h>
#include <mach/hardware.h>
-#include <asm/leds.h>
#include <asm/mach-types.h>
static inline void arch_idle(void)
--git a/arch/arm/mach-footbridge/netwinder-hw.c b/arch/arm/mach-footbridge/netwinder-hw.c
index 06e514f..e5450fe 100644
--- a/arch/arm/mach-footbridge/netwinder-hw.c
+++ b/arch/arm/mach-footbridge/netwinder-hw.c
@@ -12,9 +12,10 @@
#include <linux/init.h>
#include <linux/io.h>
#include <linux/spinlock.h>
+#include <linux/slab.h>
+#include <linux/leds.h>
#include <asm/hardware/dec21285.h>
-#include <asm/leds.h>
#include <asm/mach-types.h>
#include <asm/setup.h>
@@ -26,13 +27,6 @@
#define GP1_IO_BASE 0x338
#define GP2_IO_BASE 0x33a
-
-#ifdef CONFIG_LEDS
-#define DEFAULT_LEDS 0
-#else
-#define DEFAULT_LEDS GPIO_GREEN_LED
-#endif
-
/*
* Winbond WB83977F accessibility stuff
*/
@@ -610,15 +604,9 @@ static void __init rwa010_init(void)
static int __init nw_hw_init(void)
{
if (machine_is_netwinder()) {
- unsigned long flags;
-
wb977_init();
cpld_init();
rwa010_init();
-
- spin_lock_irqsave(&nw_gpio_lock, flags);
- nw_gpio_modify_op(GPIO_RED_LED|GPIO_GREEN_LED, DEFAULT_LEDS);
- spin_unlock_irqrestore(&nw_gpio_lock, flags);
}
return 0;
}
@@ -646,6 +634,100 @@ fixup_netwinder(struct machine_desc *desc, struct tag *tags,
#endif
}
+/* LEDs */
+struct netwinder_led {
+ struct led_classdev cdev;
+ u8 mask;
+};
+
+/*
+ * The triggers lines up below will only be used if the
+ * LED triggers are compiled in.
+ */
+static const struct {
+ const char *name;
+ const char *trigger;
+} netwinder_leds[] = {
+ { "netwinder:green", "heartbeat", },
+ { "netwinder:red", "cpu0", },
+};
+
+/*
+ * The LED control in Netwinder is reversed:
+ * - setting bit means turn off LED
+ * - clearing bit means turn on LED
+ */
+static void netwinder_led_set(struct led_classdev *cdev,
+ enum led_brightness b)
+{
+ struct netwinder_led *led = container_of(cdev,
+ struct netwinder_led, cdev);
+ unsigned long flags;
+ u32 reg;
+
+ spin_lock_irqsave(&nw_gpio_lock, flags);
+ reg = nw_gpio_read();
+ if (b != LED_OFF)
+ reg &= ~led->mask;
+ else
+ reg |= led->mask;
+ nw_gpio_modify_op(led->mask, reg);
+ spin_unlock_irqrestore(&nw_gpio_lock, flags);
+}
+
+static enum led_brightness netwinder_led_get(struct led_classdev *cdev)
+{
+ struct netwinder_led *led = container_of(cdev,
+ struct netwinder_led, cdev);
+ unsigned long flags;
+ u32 reg;
+
+ spin_lock_irqsave(&nw_gpio_lock, flags);
+ reg = nw_gpio_read();
+ spin_unlock_irqrestore(&nw_gpio_lock, flags);
+
+ return (reg & led->mask) ? LED_OFF : LED_FULL;
+}
+
+static int __init netwinder_leds_init(void)
+{
+ int i;
+
+ if (!machine_is_netwinder())
+ return -ENODEV;
+
+ for (i = 0; i < ARRAY_SIZE(netwinder_leds); i++) {
+ struct netwinder_led *led;
+
+ led = kzalloc(sizeof(*led), GFP_KERNEL);
+ if (!led)
+ break;
+
+ led->cdev.name = netwinder_leds[i].name;
+ led->cdev.brightness_set = netwinder_led_set;
+ led->cdev.brightness_get = netwinder_led_get;
+ led->cdev.default_trigger = netwinder_leds[i].trigger;
+
+ if (i == 0)
+ led->mask = GPIO_GREEN_LED;
+ else
+ led->mask = GPIO_RED_LED;
+
+ if (led_classdev_register(NULL, &led->cdev) < 0) {
+ kfree(led);
+ break;
+ }
+ }
+
+ return 0;
+}
+
+/*
+ * Since we may have triggers on any subsystem, defer registration
+ * until after subsystem_init.
+ */
+fs_initcall(netwinder_leds_init);
+
MACHINE_START(NETWINDER, "Rebel-NetWinder")
/* Maintainer: Russell King/Rebel.com */
.boot_params = 0x00000100,
diff --git a/arch/arm/mach-footbridge/netwinder-leds.c b/arch/arm/mach-footbridge/netwinder-leds.c
deleted file mode 100644
index 00269fe..0000000
--- a/arch/arm/mach-footbridge/netwinder-leds.c
+++ /dev/null
@@ -1,139 +0,0 @@
-/*
- * linux/arch/arm/mach-footbridge/netwinder-leds.c
- *
- * Copyright (C) 1998-1999 Russell King
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * NetWinder LED control routines.
- *
- * The Netwinder uses the leds as follows:
- * - Green - toggles state every 50 timer interrupts
- * - Red - On if the system is not idle
- *
- * Changelog:
- * 02-05-1999 RMK Various cleanups
- */
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/spinlock.h>
-
-#include <mach/hardware.h>
-#include <asm/leds.h>
-#include <asm/mach-types.h>
-#include <asm/system.h>
-
-#define LED_STATE_ENABLED 1
-#define LED_STATE_CLAIMED 2
-static char led_state;
-static char hw_led_state;
-
-static DEFINE_SPINLOCK(leds_lock);
-
-static void netwinder_leds_event(led_event_t evt)
-{
- unsigned long flags;
-
- spin_lock_irqsave(&leds_lock, flags);
-
- switch (evt) {
- case led_start:
- led_state |= LED_STATE_ENABLED;
- hw_led_state = GPIO_GREEN_LED;
- break;
-
- case led_stop:
- led_state &= ~LED_STATE_ENABLED;
- break;
-
- case led_claim:
- led_state |= LED_STATE_CLAIMED;
- hw_led_state = 0;
- break;
-
- case led_release:
- led_state &= ~LED_STATE_CLAIMED;
- hw_led_state = 0;
- break;
-
-#ifdef CONFIG_LEDS_TIMER
- case led_timer:
- if (!(led_state & LED_STATE_CLAIMED))
- hw_led_state ^= GPIO_GREEN_LED;
- break;
-#endif
-
-#ifdef CONFIG_LEDS_CPU
- case led_idle_start:
- if (!(led_state & LED_STATE_CLAIMED))
- hw_led_state &= ~GPIO_RED_LED;
- break;
-
- case led_idle_end:
- if (!(led_state & LED_STATE_CLAIMED))
- hw_led_state |= GPIO_RED_LED;
- break;
-#endif
-
- case led_halted:
- if (!(led_state & LED_STATE_CLAIMED))
- hw_led_state |= GPIO_RED_LED;
- break;
-
- case led_green_on:
- if (led_state & LED_STATE_CLAIMED)
- hw_led_state |= GPIO_GREEN_LED;
- break;
-
- case led_green_off:
- if (led_state & LED_STATE_CLAIMED)
- hw_led_state &= ~GPIO_GREEN_LED;
- break;
-
- case led_amber_on:
- if (led_state & LED_STATE_CLAIMED)
- hw_led_state |= GPIO_GREEN_LED | GPIO_RED_LED;
- break;
-
- case led_amber_off:
- if (led_state & LED_STATE_CLAIMED)
- hw_led_state &= ~(GPIO_GREEN_LED | GPIO_RED_LED);
- break;
-
- case led_red_on:
- if (led_state & LED_STATE_CLAIMED)
- hw_led_state |= GPIO_RED_LED;
- break;
-
- case led_red_off:
- if (led_state & LED_STATE_CLAIMED)
- hw_led_state &= ~GPIO_RED_LED;
- break;
-
- default:
- break;
- }
-
- spin_unlock_irqrestore(&leds_lock, flags);
-
- if (led_state & LED_STATE_ENABLED) {
- spin_lock_irqsave(&nw_gpio_lock, flags);
- nw_gpio_modify_op(GPIO_RED_LED | GPIO_GREEN_LED, hw_led_state);
- spin_unlock_irqrestore(&nw_gpio_lock, flags);
- }
-}
-
-static int __init leds_init(void)
-{
- if (machine_is_netwinder())
- leds_event = netwinder_leds_event;
-
- leds_event(led_start);
-
- return 0;
-}
-
-__initcall(leds_init);
--
1.7.5
^ permalink raw reply related [flat|nested] 49+ messages in thread
* [PATCH 13/18] mach-pxa: retire custom LED code
2011-08-26 9:03 ` Bryan Wu
@ 2011-08-26 9:03 ` Bryan Wu
-1 siblings, 0 replies; 49+ messages in thread
From: Bryan Wu @ 2011-08-26 9:03 UTC (permalink / raw)
To: linux, linus.walleij, rpurdie, tony, jochen, linux,
nicolas.pitre, arnd, linux-arm-kernel, jamie, linux-kernel
Signed-off-by: Bryan Wu <bryan.wu@canonical.com>
---
arch/arm/mach-pxa/Makefile | 8 --
arch/arm/mach-pxa/idp.c | 79 +++++++++++++++++++++++
arch/arm/mach-pxa/leds-idp.c | 116 ---------------------------------
arch/arm/mach-pxa/leds-lubbock.c | 125 ------------------------------------
arch/arm/mach-pxa/leds-mainstone.c | 120 ----------------------------------
arch/arm/mach-pxa/leds.c | 32 ---------
arch/arm/mach-pxa/leds.h | 13 ----
arch/arm/mach-pxa/lubbock.c | 93 ++++++++++++++++++++++++++
arch/arm/mach-pxa/mainstone.c | 92 ++++++++++++++++++++++++++
9 files changed, 264 insertions(+), 414 deletions(-)
delete mode 100644 arch/arm/mach-pxa/leds-idp.c
delete mode 100644 arch/arm/mach-pxa/leds-lubbock.c
delete mode 100644 arch/arm/mach-pxa/leds-mainstone.c
delete mode 100644 arch/arm/mach-pxa/leds.c
delete mode 100644 arch/arm/mach-pxa/leds.h
diff --git a/arch/arm/mach-pxa/Makefile b/arch/arm/mach-pxa/Makefile
index cc39d17..2d42d23 100644
--- a/arch/arm/mach-pxa/Makefile
+++ b/arch/arm/mach-pxa/Makefile
@@ -95,12 +95,4 @@ obj-$(CONFIG_MACH_RAUMFELD_CONNECTOR) += raumfeld.o
obj-$(CONFIG_MACH_RAUMFELD_SPEAKER) += raumfeld.o
obj-$(CONFIG_MACH_ZIPIT2) += z2.o
-# Support for blinky lights
-led-y := leds.o
-led-$(CONFIG_ARCH_LUBBOCK) += leds-lubbock.o
-led-$(CONFIG_MACH_MAINSTONE) += leds-mainstone.o
-led-$(CONFIG_ARCH_PXA_IDP) += leds-idp.o
-
-obj-$(CONFIG_LEDS) += $(led-y)
-
obj-$(CONFIG_TOSA_BT) += tosa-bt.o
diff --git a/arch/arm/mach-pxa/idp.c b/arch/arm/mach-pxa/idp.c
index ddf20e5..eec8e9b 100644
--- a/arch/arm/mach-pxa/idp.c
+++ b/arch/arm/mach-pxa/idp.c
@@ -191,6 +191,85 @@ static void __init idp_map_io(void)
iotable_init(idp_io_desc, ARRAY_SIZE(idp_io_desc));
}
+/* LEDs */
+struct idp_led {
+ struct led_classdev cdev;
+ u8 mask;
+};
+
+/*
+ * The triggers lines up below will only be used if the
+ * LED triggers are compiled in.
+ */
+static const struct {
+ const char *name;
+ const char *trigger;
+} idp_leds[] = {
+ { "idp:green", "heartbeat", },
+ { "idp:red", "cpu0", },
+};
+
+static void idp_led_set(struct led_classdev *cdev,
+ enum led_brightness b)
+{
+ struct idp_led *led = container_of(cdev,
+ struct idp_led, cdev);
+ u32 reg = IDP_CPLD_LED_CONTROL;
+
+ if (b != LED_OFF)
+ reg &= ~led->mask;
+ else
+ reg |= led->mask;
+
+ IDP_CPLD_LED_CONTROL = reg;
+}
+
+static enum led_brightness idp_led_get(struct led_classdev *cdev)
+{
+ struct idp_led *led = container_of(cdev,
+ struct idp_led, cdev);
+
+ return (IDP_CPLD_LED_CONTROL & led->mask) ? LED_OFF : LED_FULL;
+}
+
+static int __init idp_leds_init(void)
+{
+ int i;
+
+ if (!machine_is_pxa_idp())
+ return -ENODEV;
+
+ for (i = 0; i < ARRAY_SIZE(idp_leds); i++) {
+ struct idp_led *led;
+
+ led = kzalloc(sizeof(*led), GFP_KERNEL);
+ if (!led)
+ break;
+
+ led->cdev.name = idp_leds[i].name;
+ led->cdev.brightness_set = idp_led_set;
+ led->cdev.brightness_get = idp_led_get;
+ led->cdev.default_trigger = idp_leds[i].trigger;
+
+ if (i == 0)
+ led->mask = IDP_HB_LED;
+ else
+ led->mask = IDP_BUSY_LED;
+
+ if (led_classdev_register(NULL, &led->cdev) < 0) {
+ kfree(led);
+ break;
+ }
+ }
+
+ return 0;
+}
+
+/*
+ * Since we may have triggers on any subsystem, defer registration
+ * until after subsystem_init.
+ */
+fs_initcall(idp_leds_init);
MACHINE_START(PXA_IDP, "Vibren PXA255 IDP")
/* Maintainer: Vibren Technologies */
diff --git a/arch/arm/mach-pxa/leds-idp.c b/arch/arm/mach-pxa/leds-idp.c
deleted file mode 100644
index 8b9c171..0000000
--- a/arch/arm/mach-pxa/leds-idp.c
+++ /dev/null
@@ -1,116 +0,0 @@
-/*
- * linux/arch/arm/mach-pxa/leds-idp.c
- *
- * Copyright (C) 2000 John Dorsey <john+@cs.cmu.edu>
- *
- * Copyright (c) 2001 Jeff Sutherland <jeffs@accelent.com>
- *
- * Original (leds-footbridge.c) by Russell King
- *
- * Macros for actual LED manipulation should be in machine specific
- * files in this 'mach' directory.
- */
-
-
-#include <linux/init.h>
-
-#include <mach/hardware.h>
-#include <asm/leds.h>
-#include <asm/system.h>
-
-#include <mach/pxa25x.h>
-#include <mach/idp.h>
-
-#include "leds.h"
-
-#define LED_STATE_ENABLED 1
-#define LED_STATE_CLAIMED 2
-
-static unsigned int led_state;
-static unsigned int hw_led_state;
-
-void idp_leds_event(led_event_t evt)
-{
- unsigned long flags;
-
- local_irq_save(flags);
-
- switch (evt) {
- case led_start:
- hw_led_state = IDP_HB_LED | IDP_BUSY_LED;
- led_state = LED_STATE_ENABLED;
- break;
-
- case led_stop:
- led_state &= ~LED_STATE_ENABLED;
- break;
-
- case led_claim:
- led_state |= LED_STATE_CLAIMED;
- hw_led_state = IDP_HB_LED | IDP_BUSY_LED;
- break;
-
- case led_release:
- led_state &= ~LED_STATE_CLAIMED;
- hw_led_state = IDP_HB_LED | IDP_BUSY_LED;
- break;
-
-#ifdef CONFIG_LEDS_TIMER
- case led_timer:
- if (!(led_state & LED_STATE_CLAIMED))
- hw_led_state ^= IDP_HB_LED;
- break;
-#endif
-
-#ifdef CONFIG_LEDS_CPU
- case led_idle_start:
- if (!(led_state & LED_STATE_CLAIMED))
- hw_led_state &= ~IDP_BUSY_LED;
- break;
-
- case led_idle_end:
- if (!(led_state & LED_STATE_CLAIMED))
- hw_led_state |= IDP_BUSY_LED;
- break;
-#endif
-
- case led_halted:
- break;
-
- case led_green_on:
- if (led_state & LED_STATE_CLAIMED)
- hw_led_state |= IDP_HB_LED;
- break;
-
- case led_green_off:
- if (led_state & LED_STATE_CLAIMED)
- hw_led_state &= ~IDP_HB_LED;
- break;
-
- case led_amber_on:
- break;
-
- case led_amber_off:
- break;
-
- case led_red_on:
- if (led_state & LED_STATE_CLAIMED)
- hw_led_state |= IDP_BUSY_LED;
- break;
-
- case led_red_off:
- if (led_state & LED_STATE_CLAIMED)
- hw_led_state &= ~IDP_BUSY_LED;
- break;
-
- default:
- break;
- }
-
- if (led_state & LED_STATE_ENABLED)
- IDP_CPLD_LED_CONTROL = ( (IDP_CPLD_LED_CONTROL | IDP_LEDS_MASK) & ~hw_led_state);
- else
- IDP_CPLD_LED_CONTROL |= IDP_LEDS_MASK;
-
- local_irq_restore(flags);
-}
diff --git a/arch/arm/mach-pxa/leds-lubbock.c b/arch/arm/mach-pxa/leds-lubbock.c
deleted file mode 100644
index e26d5ef..0000000
--- a/arch/arm/mach-pxa/leds-lubbock.c
+++ /dev/null
@@ -1,125 +0,0 @@
-/*
- * linux/arch/arm/mach-pxa/leds-lubbock.c
- *
- * Copyright (C) 2000 John Dorsey <john+@cs.cmu.edu>
- *
- * Copyright (c) 2001 Jeff Sutherland <jeffs@accelent.com>
- *
- * Original (leds-footbridge.c) by Russell King
- *
- * Major surgery on April 2004 by Nicolas Pitre for less global
- * namespace collision. Mostly adapted the Mainstone version.
- */
-
-#include <linux/init.h>
-
-#include <mach/hardware.h>
-#include <asm/leds.h>
-#include <asm/system.h>
-#include <mach/pxa25x.h>
-#include <mach/lubbock.h>
-
-#include "leds.h"
-
-/*
- * 8 discrete leds available for general use:
- *
- * Note: bits [15-8] are used to enable/blank the 8 7 segment hex displays
- * so be sure to not monkey with them here.
- */
-
-#define D28 (1 << 0)
-#define D27 (1 << 1)
-#define D26 (1 << 2)
-#define D25 (1 << 3)
-#define D24 (1 << 4)
-#define D23 (1 << 5)
-#define D22 (1 << 6)
-#define D21 (1 << 7)
-
-#define LED_STATE_ENABLED 1
-#define LED_STATE_CLAIMED 2
-
-static unsigned int led_state;
-static unsigned int hw_led_state;
-
-void lubbock_leds_event(led_event_t evt)
-{
- unsigned long flags;
-
- local_irq_save(flags);
-
- switch (evt) {
- case led_start:
- hw_led_state = 0;
- led_state = LED_STATE_ENABLED;
- break;
-
- case led_stop:
- led_state &= ~LED_STATE_ENABLED;
- break;
-
- case led_claim:
- led_state |= LED_STATE_CLAIMED;
- hw_led_state = 0;
- break;
-
- case led_release:
- led_state &= ~LED_STATE_CLAIMED;
- hw_led_state = 0;
- break;
-
-#ifdef CONFIG_LEDS_TIMER
- case led_timer:
- hw_led_state ^= D26;
- break;
-#endif
-
-#ifdef CONFIG_LEDS_CPU
- case led_idle_start:
- hw_led_state &= ~D27;
- break;
-
- case led_idle_end:
- hw_led_state |= D27;
- break;
-#endif
-
- case led_halted:
- break;
-
- case led_green_on:
- hw_led_state |= D21;
- break;
-
- case led_green_off:
- hw_led_state &= ~D21;
- break;
-
- case led_amber_on:
- hw_led_state |= D22;
- break;
-
- case led_amber_off:
- hw_led_state &= ~D22;
- break;
-
- case led_red_on:
- hw_led_state |= D23;
- break;
-
- case led_red_off:
- hw_led_state &= ~D23;
- break;
-
- default:
- break;
- }
-
- if (led_state & LED_STATE_ENABLED)
- LUB_DISC_BLNK_LED = (LUB_DISC_BLNK_LED | 0xff) & ~hw_led_state;
- else
- LUB_DISC_BLNK_LED |= 0xff;
-
- local_irq_restore(flags);
-}
diff --git a/arch/arm/mach-pxa/leds-mainstone.c b/arch/arm/mach-pxa/leds-mainstone.c
deleted file mode 100644
index db4af5e..0000000
--- a/arch/arm/mach-pxa/leds-mainstone.c
+++ /dev/null
@@ -1,120 +0,0 @@
-/*
- * linux/arch/arm/mach-pxa/leds-mainstone.c
- *
- * Author: Nicolas Pitre
- * Created: Nov 05, 2002
- * Copyright: MontaVista Software Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <linux/init.h>
-
-#include <mach/hardware.h>
-#include <asm/leds.h>
-#include <asm/system.h>
-
-#include <mach/pxa27x.h>
-#include <mach/mainstone.h>
-
-#include "leds.h"
-
-
-/* 8 discrete leds available for general use: */
-#define D28 (1 << 0)
-#define D27 (1 << 1)
-#define D26 (1 << 2)
-#define D25 (1 << 3)
-#define D24 (1 << 4)
-#define D23 (1 << 5)
-#define D22 (1 << 6)
-#define D21 (1 << 7)
-
-#define LED_STATE_ENABLED 1
-#define LED_STATE_CLAIMED 2
-
-static unsigned int led_state;
-static unsigned int hw_led_state;
-
-void mainstone_leds_event(led_event_t evt)
-{
- unsigned long flags;
-
- local_irq_save(flags);
-
- switch (evt) {
- case led_start:
- hw_led_state = 0;
- led_state = LED_STATE_ENABLED;
- break;
-
- case led_stop:
- led_state &= ~LED_STATE_ENABLED;
- break;
-
- case led_claim:
- led_state |= LED_STATE_CLAIMED;
- hw_led_state = 0;
- break;
-
- case led_release:
- led_state &= ~LED_STATE_CLAIMED;
- hw_led_state = 0;
- break;
-
-#ifdef CONFIG_LEDS_TIMER
- case led_timer:
- hw_led_state ^= D26;
- break;
-#endif
-
-#ifdef CONFIG_LEDS_CPU
- case led_idle_start:
- hw_led_state &= ~D27;
- break;
-
- case led_idle_end:
- hw_led_state |= D27;
- break;
-#endif
-
- case led_halted:
- break;
-
- case led_green_on:
- hw_led_state |= D21;
- break;
-
- case led_green_off:
- hw_led_state &= ~D21;
- break;
-
- case led_amber_on:
- hw_led_state |= D22;
- break;
-
- case led_amber_off:
- hw_led_state &= ~D22;
- break;
-
- case led_red_on:
- hw_led_state |= D23;
- break;
-
- case led_red_off:
- hw_led_state &= ~D23;
- break;
-
- default:
- break;
- }
-
- if (led_state & LED_STATE_ENABLED)
- MST_LEDCTRL = (MST_LEDCTRL | 0xff) & ~hw_led_state;
- else
- MST_LEDCTRL |= 0xff;
-
- local_irq_restore(flags);
-}
diff --git a/arch/arm/mach-pxa/leds.c b/arch/arm/mach-pxa/leds.c
deleted file mode 100644
index bbe4d5f..0000000
--- a/arch/arm/mach-pxa/leds.c
+++ /dev/null
@@ -1,32 +0,0 @@
-/*
- * linux/arch/arm/mach-pxa/leds.c
- *
- * xscale LEDs dispatcher
- *
- * Copyright (C) 2001 Nicolas Pitre
- *
- * Copyright (c) 2001 Jeff Sutherland, Accelent Systems Inc.
- */
-#include <linux/compiler.h>
-#include <linux/init.h>
-
-#include <asm/leds.h>
-#include <asm/mach-types.h>
-
-#include "leds.h"
-
-static int __init
-pxa_leds_init(void)
-{
- if (machine_is_lubbock())
- leds_event = lubbock_leds_event;
- if (machine_is_mainstone())
- leds_event = mainstone_leds_event;
- if (machine_is_pxa_idp())
- leds_event = idp_leds_event;
-
- leds_event(led_start);
- return 0;
-}
-
-core_initcall(pxa_leds_init);
diff --git a/arch/arm/mach-pxa/leds.h b/arch/arm/mach-pxa/leds.h
deleted file mode 100644
index 7f0dfe0..0000000
--- a/arch/arm/mach-pxa/leds.h
+++ /dev/null
@@ -1,13 +0,0 @@
-/*
- * arch/arm/mach-pxa/leds.h
- *
- * Copyright (c) 2001 Jeff Sutherland, Accelent Systems Inc.
- *
- * blinky lights for various PXA-based systems:
- *
- */
-
-extern void idp_leds_event(led_event_t evt);
-extern void lubbock_leds_event(led_event_t evt);
-extern void mainstone_leds_event(led_event_t evt);
-extern void trizeps4_leds_event(led_event_t evt);
diff --git a/arch/arm/mach-pxa/lubbock.c b/arch/arm/mach-pxa/lubbock.c
index a8c696b..e92eb5c 100644
--- a/arch/arm/mach-pxa/lubbock.c
+++ b/arch/arm/mach-pxa/lubbock.c
@@ -14,6 +14,7 @@
#include <linux/module.h>
#include <linux/kernel.h>
#include <linux/init.h>
+#include <linux/io.h>
#include <linux/platform_device.h>
#include <linux/syscore_ops.h>
#include <linux/major.h>
@@ -22,6 +23,8 @@
#include <linux/mtd/mtd.h>
#include <linux/mtd/partitions.h>
#include <linux/smc91x.h>
+#include <linux/slab.h>
+#include <linux/leds.h>
#include <linux/spi/spi.h>
#include <linux/spi/ads7846.h>
@@ -548,6 +551,96 @@ static void __init lubbock_map_io(void)
PCFR |= PCFR_OPDE;
}
+/*
+ * Driver for the 8 discrete LEDs available for general use:
+ * Note: bits [15-8] are used to enable/blank the 8 7 segment hex displays
+ * so be sure to not monkey with them here.
+ */
+
+struct lubbock_led {
+ struct led_classdev cdev;
+ u8 mask;
+};
+
+/*
+ * The triggers lines up below will only be used if the
+ * LED triggers are compiled in.
+ */
+static const struct {
+ const char *name;
+ const char *trigger;
+} lubbock_leds[] = {
+ { "lubbock:D28", "default-on", },
+ { "lubbock:D27", "cpu0", },
+ { "lubbock:D26", "heartbeat" },
+ { "lubbock:D25", },
+ { "lubbock:D24", },
+ { "lubbock:D23", },
+ { "lubbock:D22", },
+ { "lubbock:D21", },
+};
+
+static void lubbock_led_set(struct led_classdev *cdev,
+ enum led_brightness b)
+{
+ struct lubbock_led *led = container_of(cdev,
+ struct lubbock_led, cdev);
+ u32 reg = LUB_DISC_BLNK_LED;
+
+ if (b != LED_OFF)
+ reg |= led->mask;
+ else
+ reg &= ~led->mask;
+
+ LUB_DISC_BLNK_LED = reg;
+}
+
+static enum led_brightness lubbock_led_get(struct led_classdev *cdev)
+{
+ struct lubbock_led *led = container_of(cdev,
+ struct lubbock_led, cdev);
+ u32 reg = LUB_DISC_BLNK_LED;
+
+ return (reg & led->mask) ? LED_FULL : LED_OFF;
+}
+
+static int __init lubbock_leds_init(void)
+{
+ int i;
+
+ if (!machine_is_lubbock())
+ return -ENODEV;
+
+ /* All ON */
+ LUB_DISC_BLNK_LED |= 0xff;
+ for (i = 0; i < ARRAY_SIZE(lubbock_leds); i++) {
+ struct lubbock_led *led;
+
+ led = kzalloc(sizeof(*led), GFP_KERNEL);
+ if (!led)
+ break;
+
+ led->cdev.name = lubbock_leds[i].name;
+ led->cdev.brightness_set = lubbock_led_set;
+ led->cdev.brightness_get = lubbock_led_get;
+ led->cdev.default_trigger = lubbock_leds[i].trigger;
+ led->mask = BIT(i);
+
+ if (led_classdev_register(NULL, &led->cdev) < 0) {
+ kfree(led);
+ break;
+ }
+ }
+
+ return 0;
+}
+
+/*
+ * Since we may have triggers on any subsystem, defer registration
+ * until after subsystem_init.
+ */
+fs_initcall(lubbock_leds_init);
+
MACHINE_START(LUBBOCK, "Intel DBPXA250 Development Platform (aka Lubbock)")
/* Maintainer: MontaVista Software Inc. */
.map_io = lubbock_map_io,
diff --git a/arch/arm/mach-pxa/mainstone.c b/arch/arm/mach-pxa/mainstone.c
index 4622eb7..d7e5902 100644
--- a/arch/arm/mach-pxa/mainstone.c
+++ b/arch/arm/mach-pxa/mainstone.c
@@ -28,6 +28,8 @@
#include <linux/pwm_backlight.h>
#include <linux/smc91x.h>
#include <linux/i2c/pxa-i2c.h>
+#include <linux/slab.h>
+#include <linux/leds.h>
#include <asm/types.h>
#include <asm/setup.h>
@@ -614,6 +616,96 @@ static void __init mainstone_map_io(void)
PCFR = 0x66;
}
+/*
+ * Driver for the 8 discrete LEDs available for general use:
+ * Note: bits [15-8] are used to enable/blank the 8 7 segment hex displays
+ * so be sure to not monkey with them here.
+ */
+
+struct mainstone_led {
+ struct led_classdev cdev;
+ u8 mask;
+};
+
+/*
+ * The triggers lines up below will only be used if the
+ * LED triggers are compiled in.
+ */
+static const struct {
+ const char *name;
+ const char *trigger;
+} mainstone_leds[] = {
+ { "mainstone:D28", "default-on", },
+ { "mainstone:D27", "cpu0", },
+ { "mainstone:D26", "heartbeat" },
+ { "mainstone:D25", },
+ { "mainstone:D24", },
+ { "mainstone:D23", },
+ { "mainstone:D22", },
+ { "mainstone:D21", },
+};
+
+static void mainstone_led_set(struct led_classdev *cdev,
+ enum led_brightness b)
+{
+ struct mainstone_led *led = container_of(cdev,
+ struct mainstone_led, cdev);
+ u32 reg = MST_LEDCTRL;
+
+ if (b != LED_OFF)
+ reg |= led->mask;
+ else
+ reg &= ~led->mask;
+
+ MST_LEDCTRL = reg;
+}
+
+static enum led_brightness mainstone_led_get(struct led_classdev *cdev)
+{
+ struct mainstone_led *led = container_of(cdev,
+ struct mainstone_led, cdev);
+ u32 reg = MST_LEDCTRL;
+
+ return (reg & led->mask) ? LED_FULL : LED_OFF;
+}
+
+static int __init mainstone_leds_init(void)
+{
+ int i;
+
+ if (!machine_is_mainstone())
+ return -ENODEV;
+
+ /* All ON */
+ MST_LEDCTRL |= 0xff;
+ for (i = 0; i < ARRAY_SIZE(mainstone_leds); i++) {
+ struct mainstone_led *led;
+
+ led = kzalloc(sizeof(*led), GFP_KERNEL);
+ if (!led)
+ break;
+
+ led->cdev.name = mainstone_leds[i].name;
+ led->cdev.brightness_set = mainstone_led_set;
+ led->cdev.brightness_get = mainstone_led_get;
+ led->cdev.default_trigger = mainstone_leds[i].trigger;
+ led->mask = BIT(i);
+
+ if (led_classdev_register(NULL, &led->cdev) < 0) {
+ kfree(led);
+ break;
+ }
+ }
+
+ return 0;
+}
+
+/*
+ * Since we may have triggers on any subsystem, defer registration
+ * until after subsystem_init.
+ */
+fs_initcall(mainstone_leds_init);
+
MACHINE_START(MAINSTONE, "Intel HCDDBBVA0 Development Platform (aka Mainstone)")
/* Maintainer: MontaVista Software Inc. */
.boot_params = 0xa0000100, /* BLOB boot parameter setting */
--
1.7.5
^ permalink raw reply related [flat|nested] 49+ messages in thread
* [PATCH 13/18] mach-pxa: retire custom LED code
@ 2011-08-26 9:03 ` Bryan Wu
0 siblings, 0 replies; 49+ messages in thread
From: Bryan Wu @ 2011-08-26 9:03 UTC (permalink / raw)
To: linux-arm-kernel
Signed-off-by: Bryan Wu <bryan.wu@canonical.com>
---
arch/arm/mach-pxa/Makefile | 8 --
arch/arm/mach-pxa/idp.c | 79 +++++++++++++++++++++++
arch/arm/mach-pxa/leds-idp.c | 116 ---------------------------------
arch/arm/mach-pxa/leds-lubbock.c | 125 ------------------------------------
arch/arm/mach-pxa/leds-mainstone.c | 120 ----------------------------------
arch/arm/mach-pxa/leds.c | 32 ---------
arch/arm/mach-pxa/leds.h | 13 ----
arch/arm/mach-pxa/lubbock.c | 93 ++++++++++++++++++++++++++
arch/arm/mach-pxa/mainstone.c | 92 ++++++++++++++++++++++++++
9 files changed, 264 insertions(+), 414 deletions(-)
delete mode 100644 arch/arm/mach-pxa/leds-idp.c
delete mode 100644 arch/arm/mach-pxa/leds-lubbock.c
delete mode 100644 arch/arm/mach-pxa/leds-mainstone.c
delete mode 100644 arch/arm/mach-pxa/leds.c
delete mode 100644 arch/arm/mach-pxa/leds.h
diff --git a/arch/arm/mach-pxa/Makefile b/arch/arm/mach-pxa/Makefile
index cc39d17..2d42d23 100644
--- a/arch/arm/mach-pxa/Makefile
+++ b/arch/arm/mach-pxa/Makefile
@@ -95,12 +95,4 @@ obj-$(CONFIG_MACH_RAUMFELD_CONNECTOR) += raumfeld.o
obj-$(CONFIG_MACH_RAUMFELD_SPEAKER) += raumfeld.o
obj-$(CONFIG_MACH_ZIPIT2) += z2.o
-# Support for blinky lights
-led-y := leds.o
-led-$(CONFIG_ARCH_LUBBOCK) += leds-lubbock.o
-led-$(CONFIG_MACH_MAINSTONE) += leds-mainstone.o
-led-$(CONFIG_ARCH_PXA_IDP) += leds-idp.o
-
-obj-$(CONFIG_LEDS) += $(led-y)
-
obj-$(CONFIG_TOSA_BT) += tosa-bt.o
diff --git a/arch/arm/mach-pxa/idp.c b/arch/arm/mach-pxa/idp.c
index ddf20e5..eec8e9b 100644
--- a/arch/arm/mach-pxa/idp.c
+++ b/arch/arm/mach-pxa/idp.c
@@ -191,6 +191,85 @@ static void __init idp_map_io(void)
iotable_init(idp_io_desc, ARRAY_SIZE(idp_io_desc));
}
+/* LEDs */
+struct idp_led {
+ struct led_classdev cdev;
+ u8 mask;
+};
+
+/*
+ * The triggers lines up below will only be used if the
+ * LED triggers are compiled in.
+ */
+static const struct {
+ const char *name;
+ const char *trigger;
+} idp_leds[] = {
+ { "idp:green", "heartbeat", },
+ { "idp:red", "cpu0", },
+};
+
+static void idp_led_set(struct led_classdev *cdev,
+ enum led_brightness b)
+{
+ struct idp_led *led = container_of(cdev,
+ struct idp_led, cdev);
+ u32 reg = IDP_CPLD_LED_CONTROL;
+
+ if (b != LED_OFF)
+ reg &= ~led->mask;
+ else
+ reg |= led->mask;
+
+ IDP_CPLD_LED_CONTROL = reg;
+}
+
+static enum led_brightness idp_led_get(struct led_classdev *cdev)
+{
+ struct idp_led *led = container_of(cdev,
+ struct idp_led, cdev);
+
+ return (IDP_CPLD_LED_CONTROL & led->mask) ? LED_OFF : LED_FULL;
+}
+
+static int __init idp_leds_init(void)
+{
+ int i;
+
+ if (!machine_is_pxa_idp())
+ return -ENODEV;
+
+ for (i = 0; i < ARRAY_SIZE(idp_leds); i++) {
+ struct idp_led *led;
+
+ led = kzalloc(sizeof(*led), GFP_KERNEL);
+ if (!led)
+ break;
+
+ led->cdev.name = idp_leds[i].name;
+ led->cdev.brightness_set = idp_led_set;
+ led->cdev.brightness_get = idp_led_get;
+ led->cdev.default_trigger = idp_leds[i].trigger;
+
+ if (i == 0)
+ led->mask = IDP_HB_LED;
+ else
+ led->mask = IDP_BUSY_LED;
+
+ if (led_classdev_register(NULL, &led->cdev) < 0) {
+ kfree(led);
+ break;
+ }
+ }
+
+ return 0;
+}
+
+/*
+ * Since we may have triggers on any subsystem, defer registration
+ * until after subsystem_init.
+ */
+fs_initcall(idp_leds_init);
MACHINE_START(PXA_IDP, "Vibren PXA255 IDP")
/* Maintainer: Vibren Technologies */
diff --git a/arch/arm/mach-pxa/leds-idp.c b/arch/arm/mach-pxa/leds-idp.c
deleted file mode 100644
index 8b9c171..0000000
--- a/arch/arm/mach-pxa/leds-idp.c
+++ /dev/null
@@ -1,116 +0,0 @@
-/*
- * linux/arch/arm/mach-pxa/leds-idp.c
- *
- * Copyright (C) 2000 John Dorsey <john+@cs.cmu.edu>
- *
- * Copyright (c) 2001 Jeff Sutherland <jeffs@accelent.com>
- *
- * Original (leds-footbridge.c) by Russell King
- *
- * Macros for actual LED manipulation should be in machine specific
- * files in this 'mach' directory.
- */
-
-
-#include <linux/init.h>
-
-#include <mach/hardware.h>
-#include <asm/leds.h>
-#include <asm/system.h>
-
-#include <mach/pxa25x.h>
-#include <mach/idp.h>
-
-#include "leds.h"
-
-#define LED_STATE_ENABLED 1
-#define LED_STATE_CLAIMED 2
-
-static unsigned int led_state;
-static unsigned int hw_led_state;
-
-void idp_leds_event(led_event_t evt)
-{
- unsigned long flags;
-
- local_irq_save(flags);
-
- switch (evt) {
- case led_start:
- hw_led_state = IDP_HB_LED | IDP_BUSY_LED;
- led_state = LED_STATE_ENABLED;
- break;
-
- case led_stop:
- led_state &= ~LED_STATE_ENABLED;
- break;
-
- case led_claim:
- led_state |= LED_STATE_CLAIMED;
- hw_led_state = IDP_HB_LED | IDP_BUSY_LED;
- break;
-
- case led_release:
- led_state &= ~LED_STATE_CLAIMED;
- hw_led_state = IDP_HB_LED | IDP_BUSY_LED;
- break;
-
-#ifdef CONFIG_LEDS_TIMER
- case led_timer:
- if (!(led_state & LED_STATE_CLAIMED))
- hw_led_state ^= IDP_HB_LED;
- break;
-#endif
-
-#ifdef CONFIG_LEDS_CPU
- case led_idle_start:
- if (!(led_state & LED_STATE_CLAIMED))
- hw_led_state &= ~IDP_BUSY_LED;
- break;
-
- case led_idle_end:
- if (!(led_state & LED_STATE_CLAIMED))
- hw_led_state |= IDP_BUSY_LED;
- break;
-#endif
-
- case led_halted:
- break;
-
- case led_green_on:
- if (led_state & LED_STATE_CLAIMED)
- hw_led_state |= IDP_HB_LED;
- break;
-
- case led_green_off:
- if (led_state & LED_STATE_CLAIMED)
- hw_led_state &= ~IDP_HB_LED;
- break;
-
- case led_amber_on:
- break;
-
- case led_amber_off:
- break;
-
- case led_red_on:
- if (led_state & LED_STATE_CLAIMED)
- hw_led_state |= IDP_BUSY_LED;
- break;
-
- case led_red_off:
- if (led_state & LED_STATE_CLAIMED)
- hw_led_state &= ~IDP_BUSY_LED;
- break;
-
- default:
- break;
- }
-
- if (led_state & LED_STATE_ENABLED)
- IDP_CPLD_LED_CONTROL = ( (IDP_CPLD_LED_CONTROL | IDP_LEDS_MASK) & ~hw_led_state);
- else
- IDP_CPLD_LED_CONTROL |= IDP_LEDS_MASK;
-
- local_irq_restore(flags);
-}
diff --git a/arch/arm/mach-pxa/leds-lubbock.c b/arch/arm/mach-pxa/leds-lubbock.c
deleted file mode 100644
index e26d5ef..0000000
--- a/arch/arm/mach-pxa/leds-lubbock.c
+++ /dev/null
@@ -1,125 +0,0 @@
-/*
- * linux/arch/arm/mach-pxa/leds-lubbock.c
- *
- * Copyright (C) 2000 John Dorsey <john+@cs.cmu.edu>
- *
- * Copyright (c) 2001 Jeff Sutherland <jeffs@accelent.com>
- *
- * Original (leds-footbridge.c) by Russell King
- *
- * Major surgery on April 2004 by Nicolas Pitre for less global
- * namespace collision. Mostly adapted the Mainstone version.
- */
-
-#include <linux/init.h>
-
-#include <mach/hardware.h>
-#include <asm/leds.h>
-#include <asm/system.h>
-#include <mach/pxa25x.h>
-#include <mach/lubbock.h>
-
-#include "leds.h"
-
-/*
- * 8 discrete leds available for general use:
- *
- * Note: bits [15-8] are used to enable/blank the 8 7 segment hex displays
- * so be sure to not monkey with them here.
- */
-
-#define D28 (1 << 0)
-#define D27 (1 << 1)
-#define D26 (1 << 2)
-#define D25 (1 << 3)
-#define D24 (1 << 4)
-#define D23 (1 << 5)
-#define D22 (1 << 6)
-#define D21 (1 << 7)
-
-#define LED_STATE_ENABLED 1
-#define LED_STATE_CLAIMED 2
-
-static unsigned int led_state;
-static unsigned int hw_led_state;
-
-void lubbock_leds_event(led_event_t evt)
-{
- unsigned long flags;
-
- local_irq_save(flags);
-
- switch (evt) {
- case led_start:
- hw_led_state = 0;
- led_state = LED_STATE_ENABLED;
- break;
-
- case led_stop:
- led_state &= ~LED_STATE_ENABLED;
- break;
-
- case led_claim:
- led_state |= LED_STATE_CLAIMED;
- hw_led_state = 0;
- break;
-
- case led_release:
- led_state &= ~LED_STATE_CLAIMED;
- hw_led_state = 0;
- break;
-
-#ifdef CONFIG_LEDS_TIMER
- case led_timer:
- hw_led_state ^= D26;
- break;
-#endif
-
-#ifdef CONFIG_LEDS_CPU
- case led_idle_start:
- hw_led_state &= ~D27;
- break;
-
- case led_idle_end:
- hw_led_state |= D27;
- break;
-#endif
-
- case led_halted:
- break;
-
- case led_green_on:
- hw_led_state |= D21;
- break;
-
- case led_green_off:
- hw_led_state &= ~D21;
- break;
-
- case led_amber_on:
- hw_led_state |= D22;
- break;
-
- case led_amber_off:
- hw_led_state &= ~D22;
- break;
-
- case led_red_on:
- hw_led_state |= D23;
- break;
-
- case led_red_off:
- hw_led_state &= ~D23;
- break;
-
- default:
- break;
- }
-
- if (led_state & LED_STATE_ENABLED)
- LUB_DISC_BLNK_LED = (LUB_DISC_BLNK_LED | 0xff) & ~hw_led_state;
- else
- LUB_DISC_BLNK_LED |= 0xff;
-
- local_irq_restore(flags);
-}
diff --git a/arch/arm/mach-pxa/leds-mainstone.c b/arch/arm/mach-pxa/leds-mainstone.c
deleted file mode 100644
index db4af5e..0000000
--- a/arch/arm/mach-pxa/leds-mainstone.c
+++ /dev/null
@@ -1,120 +0,0 @@
-/*
- * linux/arch/arm/mach-pxa/leds-mainstone.c
- *
- * Author: Nicolas Pitre
- * Created: Nov 05, 2002
- * Copyright: MontaVista Software Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <linux/init.h>
-
-#include <mach/hardware.h>
-#include <asm/leds.h>
-#include <asm/system.h>
-
-#include <mach/pxa27x.h>
-#include <mach/mainstone.h>
-
-#include "leds.h"
-
-
-/* 8 discrete leds available for general use: */
-#define D28 (1 << 0)
-#define D27 (1 << 1)
-#define D26 (1 << 2)
-#define D25 (1 << 3)
-#define D24 (1 << 4)
-#define D23 (1 << 5)
-#define D22 (1 << 6)
-#define D21 (1 << 7)
-
-#define LED_STATE_ENABLED 1
-#define LED_STATE_CLAIMED 2
-
-static unsigned int led_state;
-static unsigned int hw_led_state;
-
-void mainstone_leds_event(led_event_t evt)
-{
- unsigned long flags;
-
- local_irq_save(flags);
-
- switch (evt) {
- case led_start:
- hw_led_state = 0;
- led_state = LED_STATE_ENABLED;
- break;
-
- case led_stop:
- led_state &= ~LED_STATE_ENABLED;
- break;
-
- case led_claim:
- led_state |= LED_STATE_CLAIMED;
- hw_led_state = 0;
- break;
-
- case led_release:
- led_state &= ~LED_STATE_CLAIMED;
- hw_led_state = 0;
- break;
-
-#ifdef CONFIG_LEDS_TIMER
- case led_timer:
- hw_led_state ^= D26;
- break;
-#endif
-
-#ifdef CONFIG_LEDS_CPU
- case led_idle_start:
- hw_led_state &= ~D27;
- break;
-
- case led_idle_end:
- hw_led_state |= D27;
- break;
-#endif
-
- case led_halted:
- break;
-
- case led_green_on:
- hw_led_state |= D21;
- break;
-
- case led_green_off:
- hw_led_state &= ~D21;
- break;
-
- case led_amber_on:
- hw_led_state |= D22;
- break;
-
- case led_amber_off:
- hw_led_state &= ~D22;
- break;
-
- case led_red_on:
- hw_led_state |= D23;
- break;
-
- case led_red_off:
- hw_led_state &= ~D23;
- break;
-
- default:
- break;
- }
-
- if (led_state & LED_STATE_ENABLED)
- MST_LEDCTRL = (MST_LEDCTRL | 0xff) & ~hw_led_state;
- else
- MST_LEDCTRL |= 0xff;
-
- local_irq_restore(flags);
-}
diff --git a/arch/arm/mach-pxa/leds.c b/arch/arm/mach-pxa/leds.c
deleted file mode 100644
index bbe4d5f..0000000
--- a/arch/arm/mach-pxa/leds.c
+++ /dev/null
@@ -1,32 +0,0 @@
-/*
- * linux/arch/arm/mach-pxa/leds.c
- *
- * xscale LEDs dispatcher
- *
- * Copyright (C) 2001 Nicolas Pitre
- *
- * Copyright (c) 2001 Jeff Sutherland, Accelent Systems Inc.
- */
-#include <linux/compiler.h>
-#include <linux/init.h>
-
-#include <asm/leds.h>
-#include <asm/mach-types.h>
-
-#include "leds.h"
-
-static int __init
-pxa_leds_init(void)
-{
- if (machine_is_lubbock())
- leds_event = lubbock_leds_event;
- if (machine_is_mainstone())
- leds_event = mainstone_leds_event;
- if (machine_is_pxa_idp())
- leds_event = idp_leds_event;
-
- leds_event(led_start);
- return 0;
-}
-
-core_initcall(pxa_leds_init);
diff --git a/arch/arm/mach-pxa/leds.h b/arch/arm/mach-pxa/leds.h
deleted file mode 100644
index 7f0dfe0..0000000
--- a/arch/arm/mach-pxa/leds.h
+++ /dev/null
@@ -1,13 +0,0 @@
-/*
- * arch/arm/mach-pxa/leds.h
- *
- * Copyright (c) 2001 Jeff Sutherland, Accelent Systems Inc.
- *
- * blinky lights for various PXA-based systems:
- *
- */
-
-extern void idp_leds_event(led_event_t evt);
-extern void lubbock_leds_event(led_event_t evt);
-extern void mainstone_leds_event(led_event_t evt);
-extern void trizeps4_leds_event(led_event_t evt);
diff --git a/arch/arm/mach-pxa/lubbock.c b/arch/arm/mach-pxa/lubbock.c
index a8c696b..e92eb5c 100644
--- a/arch/arm/mach-pxa/lubbock.c
+++ b/arch/arm/mach-pxa/lubbock.c
@@ -14,6 +14,7 @@
#include <linux/module.h>
#include <linux/kernel.h>
#include <linux/init.h>
+#include <linux/io.h>
#include <linux/platform_device.h>
#include <linux/syscore_ops.h>
#include <linux/major.h>
@@ -22,6 +23,8 @@
#include <linux/mtd/mtd.h>
#include <linux/mtd/partitions.h>
#include <linux/smc91x.h>
+#include <linux/slab.h>
+#include <linux/leds.h>
#include <linux/spi/spi.h>
#include <linux/spi/ads7846.h>
@@ -548,6 +551,96 @@ static void __init lubbock_map_io(void)
PCFR |= PCFR_OPDE;
}
+/*
+ * Driver for the 8 discrete LEDs available for general use:
+ * Note: bits [15-8] are used to enable/blank the 8 7 segment hex displays
+ * so be sure to not monkey with them here.
+ */
+
+struct lubbock_led {
+ struct led_classdev cdev;
+ u8 mask;
+};
+
+/*
+ * The triggers lines up below will only be used if the
+ * LED triggers are compiled in.
+ */
+static const struct {
+ const char *name;
+ const char *trigger;
+} lubbock_leds[] = {
+ { "lubbock:D28", "default-on", },
+ { "lubbock:D27", "cpu0", },
+ { "lubbock:D26", "heartbeat" },
+ { "lubbock:D25", },
+ { "lubbock:D24", },
+ { "lubbock:D23", },
+ { "lubbock:D22", },
+ { "lubbock:D21", },
+};
+
+static void lubbock_led_set(struct led_classdev *cdev,
+ enum led_brightness b)
+{
+ struct lubbock_led *led = container_of(cdev,
+ struct lubbock_led, cdev);
+ u32 reg = LUB_DISC_BLNK_LED;
+
+ if (b != LED_OFF)
+ reg |= led->mask;
+ else
+ reg &= ~led->mask;
+
+ LUB_DISC_BLNK_LED = reg;
+}
+
+static enum led_brightness lubbock_led_get(struct led_classdev *cdev)
+{
+ struct lubbock_led *led = container_of(cdev,
+ struct lubbock_led, cdev);
+ u32 reg = LUB_DISC_BLNK_LED;
+
+ return (reg & led->mask) ? LED_FULL : LED_OFF;
+}
+
+static int __init lubbock_leds_init(void)
+{
+ int i;
+
+ if (!machine_is_lubbock())
+ return -ENODEV;
+
+ /* All ON */
+ LUB_DISC_BLNK_LED |= 0xff;
+ for (i = 0; i < ARRAY_SIZE(lubbock_leds); i++) {
+ struct lubbock_led *led;
+
+ led = kzalloc(sizeof(*led), GFP_KERNEL);
+ if (!led)
+ break;
+
+ led->cdev.name = lubbock_leds[i].name;
+ led->cdev.brightness_set = lubbock_led_set;
+ led->cdev.brightness_get = lubbock_led_get;
+ led->cdev.default_trigger = lubbock_leds[i].trigger;
+ led->mask = BIT(i);
+
+ if (led_classdev_register(NULL, &led->cdev) < 0) {
+ kfree(led);
+ break;
+ }
+ }
+
+ return 0;
+}
+
+/*
+ * Since we may have triggers on any subsystem, defer registration
+ * until after subsystem_init.
+ */
+fs_initcall(lubbock_leds_init);
+
MACHINE_START(LUBBOCK, "Intel DBPXA250 Development Platform (aka Lubbock)")
/* Maintainer: MontaVista Software Inc. */
.map_io = lubbock_map_io,
diff --git a/arch/arm/mach-pxa/mainstone.c b/arch/arm/mach-pxa/mainstone.c
index 4622eb7..d7e5902 100644
--- a/arch/arm/mach-pxa/mainstone.c
+++ b/arch/arm/mach-pxa/mainstone.c
@@ -28,6 +28,8 @@
#include <linux/pwm_backlight.h>
#include <linux/smc91x.h>
#include <linux/i2c/pxa-i2c.h>
+#include <linux/slab.h>
+#include <linux/leds.h>
#include <asm/types.h>
#include <asm/setup.h>
@@ -614,6 +616,96 @@ static void __init mainstone_map_io(void)
PCFR = 0x66;
}
+/*
+ * Driver for the 8 discrete LEDs available for general use:
+ * Note: bits [15-8] are used to enable/blank the 8 7 segment hex displays
+ * so be sure to not monkey with them here.
+ */
+
+struct mainstone_led {
+ struct led_classdev cdev;
+ u8 mask;
+};
+
+/*
+ * The triggers lines up below will only be used if the
+ * LED triggers are compiled in.
+ */
+static const struct {
+ const char *name;
+ const char *trigger;
+} mainstone_leds[] = {
+ { "mainstone:D28", "default-on", },
+ { "mainstone:D27", "cpu0", },
+ { "mainstone:D26", "heartbeat" },
+ { "mainstone:D25", },
+ { "mainstone:D24", },
+ { "mainstone:D23", },
+ { "mainstone:D22", },
+ { "mainstone:D21", },
+};
+
+static void mainstone_led_set(struct led_classdev *cdev,
+ enum led_brightness b)
+{
+ struct mainstone_led *led = container_of(cdev,
+ struct mainstone_led, cdev);
+ u32 reg = MST_LEDCTRL;
+
+ if (b != LED_OFF)
+ reg |= led->mask;
+ else
+ reg &= ~led->mask;
+
+ MST_LEDCTRL = reg;
+}
+
+static enum led_brightness mainstone_led_get(struct led_classdev *cdev)
+{
+ struct mainstone_led *led = container_of(cdev,
+ struct mainstone_led, cdev);
+ u32 reg = MST_LEDCTRL;
+
+ return (reg & led->mask) ? LED_FULL : LED_OFF;
+}
+
+static int __init mainstone_leds_init(void)
+{
+ int i;
+
+ if (!machine_is_mainstone())
+ return -ENODEV;
+
+ /* All ON */
+ MST_LEDCTRL |= 0xff;
+ for (i = 0; i < ARRAY_SIZE(mainstone_leds); i++) {
+ struct mainstone_led *led;
+
+ led = kzalloc(sizeof(*led), GFP_KERNEL);
+ if (!led)
+ break;
+
+ led->cdev.name = mainstone_leds[i].name;
+ led->cdev.brightness_set = mainstone_led_set;
+ led->cdev.brightness_get = mainstone_led_get;
+ led->cdev.default_trigger = mainstone_leds[i].trigger;
+ led->mask = BIT(i);
+
+ if (led_classdev_register(NULL, &led->cdev) < 0) {
+ kfree(led);
+ break;
+ }
+ }
+
+ return 0;
+}
+
+/*
+ * Since we may have triggers on any subsystem, defer registration
+ * until after subsystem_init.
+ */
+fs_initcall(mainstone_leds_init);
+
MACHINE_START(MAINSTONE, "Intel HCDDBBVA0 Development Platform (aka Mainstone)")
/* Maintainer: MontaVista Software Inc. */
.boot_params = 0xa0000100, /* BLOB boot parameter setting */
--
1.7.5
^ permalink raw reply related [flat|nested] 49+ messages in thread
* [PATCH 14/18] plat-samsung: remove including old leds event API header file
2011-08-26 9:03 ` Bryan Wu
@ 2011-08-26 9:03 ` Bryan Wu
-1 siblings, 0 replies; 49+ messages in thread
From: Bryan Wu @ 2011-08-26 9:03 UTC (permalink / raw)
To: linux, linus.walleij, rpurdie, tony, jochen, linux,
nicolas.pitre, arnd, linux-arm-kernel, jamie, linux-kernel
Signed-off-by: Bryan Wu <bryan.wu@canonical.com>
---
arch/arm/plat-samsung/time.c | 1 -
1 files changed, 0 insertions(+), 1 deletions(-)
diff --git a/arch/arm/plat-samsung/time.c b/arch/arm/plat-samsung/time.c
index e3bb806..a65ef40 100644
--- a/arch/arm/plat-samsung/time.c
+++ b/arch/arm/plat-samsung/time.c
@@ -29,7 +29,6 @@
#include <linux/platform_device.h>
#include <asm/system.h>
-#include <asm/leds.h>
#include <asm/mach-types.h>
#include <asm/irq.h>
--
1.7.5
^ permalink raw reply related [flat|nested] 49+ messages in thread
* [PATCH 14/18] plat-samsung: remove including old leds event API header file
@ 2011-08-26 9:03 ` Bryan Wu
0 siblings, 0 replies; 49+ messages in thread
From: Bryan Wu @ 2011-08-26 9:03 UTC (permalink / raw)
To: linux-arm-kernel
Signed-off-by: Bryan Wu <bryan.wu@canonical.com>
---
arch/arm/plat-samsung/time.c | 1 -
1 files changed, 0 insertions(+), 1 deletions(-)
diff --git a/arch/arm/plat-samsung/time.c b/arch/arm/plat-samsung/time.c
index e3bb806..a65ef40 100644
--- a/arch/arm/plat-samsung/time.c
+++ b/arch/arm/plat-samsung/time.c
@@ -29,7 +29,6 @@
#include <linux/platform_device.h>
#include <asm/system.h>
-#include <asm/leds.h>
#include <asm/mach-types.h>
#include <asm/irq.h>
--
1.7.5
^ permalink raw reply related [flat|nested] 49+ messages in thread
* [PATCH 15/18] mach-pnx4008: remove including old leds event API header file
2011-08-26 9:03 ` Bryan Wu
@ 2011-08-26 9:03 ` Bryan Wu
-1 siblings, 0 replies; 49+ messages in thread
From: Bryan Wu @ 2011-08-26 9:03 UTC (permalink / raw)
To: linux, linus.walleij, rpurdie, tony, jochen, linux,
nicolas.pitre, arnd, linux-arm-kernel, jamie, linux-kernel
Signed-off-by: Bryan Wu <bryan.wu@canonical.com>
---
arch/arm/mach-pnx4008/time.c | 1 -
1 files changed, 0 insertions(+), 1 deletions(-)
diff --git a/arch/arm/mach-pnx4008/time.c b/arch/arm/mach-pnx4008/time.c
index 0c8aad4..4385793 100644
--- a/arch/arm/mach-pnx4008/time.c
+++ b/arch/arm/mach-pnx4008/time.c
@@ -26,7 +26,6 @@
#include <asm/system.h>
#include <mach/hardware.h>
-#include <asm/leds.h>
#include <asm/mach/time.h>
#include <asm/errno.h>
--
1.7.5
^ permalink raw reply related [flat|nested] 49+ messages in thread
* [PATCH 15/18] mach-pnx4008: remove including old leds event API header file
@ 2011-08-26 9:03 ` Bryan Wu
0 siblings, 0 replies; 49+ messages in thread
From: Bryan Wu @ 2011-08-26 9:03 UTC (permalink / raw)
To: linux-arm-kernel
Signed-off-by: Bryan Wu <bryan.wu@canonical.com>
---
arch/arm/mach-pnx4008/time.c | 1 -
1 files changed, 0 insertions(+), 1 deletions(-)
diff --git a/arch/arm/mach-pnx4008/time.c b/arch/arm/mach-pnx4008/time.c
index 0c8aad4..4385793 100644
--- a/arch/arm/mach-pnx4008/time.c
+++ b/arch/arm/mach-pnx4008/time.c
@@ -26,7 +26,6 @@
#include <asm/system.h>
#include <mach/hardware.h>
-#include <asm/leds.h>
#include <asm/mach/time.h>
#include <asm/errno.h>
--
1.7.5
^ permalink raw reply related [flat|nested] 49+ messages in thread
* [PATCH 16/18] mach-omap1: retire custom LED code
2011-08-26 9:03 ` Bryan Wu
@ 2011-08-26 9:03 ` Bryan Wu
-1 siblings, 0 replies; 49+ messages in thread
From: Bryan Wu @ 2011-08-26 9:03 UTC (permalink / raw)
To: linux, linus.walleij, rpurdie, tony, jochen, linux,
nicolas.pitre, arnd, linux-arm-kernel, jamie, linux-kernel
Signed-off-by: Bryan Wu <bryan.wu@canonical.com>
Acked-by: Tony Lindgren <tony@atomide.com>
---
arch/arm/mach-omap1/Makefile | 8 -
arch/arm/mach-omap1/board-h2.c | 34 ++++-
arch/arm/mach-omap1/board-h3.c | 34 ++++-
arch/arm/mach-omap1/board-osk.c | 33 ++++
arch/arm/mach-omap1/leds-h2p2-debug.c | 167 -------------------
arch/arm/mach-omap1/leds-innovator.c | 99 -----------
arch/arm/mach-omap1/leds-osk.c | 115 -------------
arch/arm/mach-omap1/leds.c | 69 --------
arch/arm/mach-omap1/leds.h | 3 -
arch/arm/mach-omap1/time.c | 1 -
arch/arm/mach-omap1/timer32k.c | 1 -
arch/arm/plat-omap/Kconfig | 3 +-
arch/arm/plat-omap/debug-leds.c | 292 ++++++++-------------------------
13 files changed, 166 insertions(+), 693 deletions(-)
delete mode 100644 arch/arm/mach-omap1/leds-h2p2-debug.c
delete mode 100644 arch/arm/mach-omap1/leds-innovator.c
delete mode 100644 arch/arm/mach-omap1/leds-osk.c
delete mode 100644 arch/arm/mach-omap1/leds.c
delete mode 100644 arch/arm/mach-omap1/leds.h
diff --git a/arch/arm/mach-omap1/Makefile b/arch/arm/mach-omap1/Makefile
index 5b114d1..4d2a140 100644
--- a/arch/arm/mach-omap1/Makefile
+++ b/arch/arm/mach-omap1/Makefile
@@ -54,14 +54,6 @@ obj-$(CONFIG_ARCH_OMAP850) += gpio7xx.o
obj-$(CONFIG_ARCH_OMAP15XX) += gpio15xx.o
obj-$(CONFIG_ARCH_OMAP16XX) += gpio16xx.o
-# LEDs support
-led-$(CONFIG_MACH_OMAP_H2) += leds-h2p2-debug.o
-led-$(CONFIG_MACH_OMAP_H3) += leds-h2p2-debug.o
-led-$(CONFIG_MACH_OMAP_INNOVATOR) += leds-innovator.o
-led-$(CONFIG_MACH_OMAP_PERSEUS2) += leds-h2p2-debug.o
-led-$(CONFIG_MACH_OMAP_OSK) += leds-osk.o
-obj-$(CONFIG_LEDS) += $(led-y)
-
ifneq ($(CONFIG_FB_OMAP),)
obj-y += lcd_dma.o
endif
diff --git a/arch/arm/mach-omap1/board-h2.c b/arch/arm/mach-omap1/board-h2.c
index cb7fb1a..a9f32fc 100644
--- a/arch/arm/mach-omap1/board-h2.c
+++ b/arch/arm/mach-omap1/board-h2.c
@@ -30,9 +30,10 @@
#include <linux/input.h>
#include <linux/i2c/tps65010.h>
#include <linux/smc91x.h>
+#include <linux/leds.h>
+#include <linux/gpio.h>
#include <mach/hardware.h>
-#include <asm/gpio.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
@@ -331,6 +332,32 @@ static struct platform_device h2_lcd_device = {
.id = -1,
};
+static struct gpio_led h2_gpio_led_pins[] = {
+ {
+ .name = "h2:red",
+ .default_trigger = "heartbeat",
+ .gpio = 3,
+ },
+ {
+ .name = "h2:green",
+ .default_trigger = "cpu0",
+ .gpio = OMAP_MPUIO(4),
+ },
+};
+
+static struct gpio_led_platform_data h2_gpio_led_data = {
+ .leds = h2_gpio_led_pins,
+ .num_leds = ARRAY_SIZE(h2_gpio_led_pins),
+};
+
+static struct platform_device h2_gpio_leds = {
+ .name = "leds-gpio",
+ .id = -1,
+ .dev = {
+ .platform_data = &h2_gpio_led_data,
+ },
+};
+
static struct platform_device *h2_devices[] __initdata = {
&h2_nor_device,
&h2_nand_device,
@@ -338,6 +365,7 @@ static struct platform_device *h2_devices[] __initdata = {
&h2_irda_device,
&h2_kp_device,
&h2_lcd_device,
+ &h2_gpio_leds,
};
static void __init h2_init_smc91x(void)
@@ -444,6 +472,10 @@ static void __init h2_init(void)
omap_cfg_reg(E19_1610_KBR4);
omap_cfg_reg(N19_1610_KBR5);
+ /* GPIO based LEDs */
+ omap_cfg_reg(P18_1610_GPIO3);
+ omap_cfg_reg(MPUIO4);
+
platform_add_devices(h2_devices, ARRAY_SIZE(h2_devices));
omap_board_config = h2_config;
omap_board_config_size = ARRAY_SIZE(h2_config);
diff --git a/arch/arm/mach-omap1/board-h3.c b/arch/arm/mach-omap1/board-h3.c
index 31f3487..8845734 100644
--- a/arch/arm/mach-omap1/board-h3.c
+++ b/arch/arm/mach-omap1/board-h3.c
@@ -30,11 +30,12 @@
#include <linux/spi/spi.h>
#include <linux/i2c/tps65010.h>
#include <linux/smc91x.h>
+#include <linux/gpio.h>
+#include <linux/leds.h>
#include <asm/setup.h>
#include <asm/page.h>
#include <mach/hardware.h>
-#include <asm/gpio.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
@@ -344,6 +345,32 @@ static struct spi_board_info h3_spi_board_info[] __initdata = {
},
};
+static struct gpio_led h3_gpio_led_pins[] = {
+ {
+ .name = "h3:red",
+ .default_trigger = "heartbeat",
+ .gpio = 3,
+ },
+ {
+ .name = "h3:green",
+ .default_trigger = "cpu0",
+ .gpio = OMAP_MPUIO(4),
+ },
+};
+
+static struct gpio_led_platform_data h3_gpio_led_data = {
+ .leds = h3_gpio_led_pins,
+ .num_leds = ARRAY_SIZE(h3_gpio_led_pins),
+};
+
+static struct platform_device h3_gpio_leds = {
+ .name = "leds-gpio",
+ .id = -1,
+ .dev = {
+ .platform_data = &h3_gpio_led_data,
+ },
+};
+
static struct platform_device *devices[] __initdata = {
&nor_device,
&nand_device,
@@ -351,6 +378,7 @@ static struct platform_device *devices[] __initdata = {
&intlat_device,
&h3_kp_device,
&h3_lcd_device,
+ &h3_gpio_leds,
};
static struct omap_usb_config h3_usb_config __initdata = {
@@ -424,6 +452,10 @@ static void __init h3_init(void)
omap_cfg_reg(E19_1610_KBR4);
omap_cfg_reg(N19_1610_KBR5);
+ /* GPIO based LEDs */
+ omap_cfg_reg(P18_1610_GPIO3);
+ omap_cfg_reg(MPUIO4);
+
platform_add_devices(devices, ARRAY_SIZE(devices));
spi_register_board_info(h3_spi_board_info,
ARRAY_SIZE(h3_spi_board_info));
diff --git a/arch/arm/mach-omap1/board-osk.c b/arch/arm/mach-omap1/board-osk.c
index b08a213..4ebf135 100644
--- a/arch/arm/mach-omap1/board-osk.c
+++ b/arch/arm/mach-omap1/board-osk.c
@@ -398,10 +398,37 @@ static struct platform_device osk5912_lcd_device = {
.id = -1,
};
+static struct gpio_led mistral_gpio_led_pins[] = {
+ {
+ .name = "mistral:red",
+ .default_trigger = "heartbeat",
+ .gpio = 3,
+ },
+ {
+ .name = "mistral:green",
+ .default_trigger = "cpu0",
+ .gpio = OMAP_MPUIO(4),
+ },
+};
+
+static struct gpio_led_platform_data mistral_gpio_led_data = {
+ .leds = mistral_gpio_led_pins,
+ .num_leds = ARRAY_SIZE(mistral_gpio_led_pins),
+};
+
+static struct platform_device mistral_gpio_leds = {
+ .name = "leds-gpio",
+ .id = -1,
+ .dev = {
+ .platform_data = &mistral_gpio_led_data,
+ },
+};
+
static struct platform_device *mistral_devices[] __initdata = {
&osk5912_kp_device,
&mistral_bl_device,
&osk5912_lcd_device,
+ &mistral_gpio_leds,
};
static int mistral_get_pendown_state(void)
@@ -526,6 +553,12 @@ static void __init osk_mistral_init(void)
if (gpio_request(2, "lcd_pwr") == 0)
gpio_direction_output(2, 1);
+ /*
+ * GPIO based LEDs
+ */
+ omap_cfg_reg(P18_1610_GPIO3);
+ omap_cfg_reg(MPUIO4);
+
i2c_register_board_info(1, mistral_i2c_board_info,
ARRAY_SIZE(mistral_i2c_board_info));
diff --git a/arch/arm/mach-omap1/leds-h2p2-debug.c b/arch/arm/mach-omap1/leds-h2p2-debug.c
deleted file mode 100644
index b4f9be5..0000000
--- a/arch/arm/mach-omap1/leds-h2p2-debug.c
+++ /dev/null
@@ -1,167 +0,0 @@
-/*
- * linux/arch/arm/mach-omap1/leds-h2p2-debug.c
- *
- * Copyright 2003 by Texas Instruments Incorporated
- *
- * There are 16 LEDs on the debug board (all green); four may be used
- * for logical 'green', 'amber', 'red', and 'blue' (after "claiming").
- *
- * The "surfer" expansion board and H2 sample board also have two-color
- * green+red LEDs (in parallel), used here for timer and idle indicators.
- */
-#include <linux/init.h>
-#include <linux/kernel_stat.h>
-#include <linux/sched.h>
-#include <linux/io.h>
-
-#include <mach/hardware.h>
-#include <asm/leds.h>
-#include <asm/system.h>
-#include <asm/mach-types.h>
-
-#include <plat/fpga.h>
-#include <mach/gpio.h>
-
-#include "leds.h"
-
-
-#define GPIO_LED_RED 3
-#define GPIO_LED_GREEN OMAP_MPUIO(4)
-
-
-#define LED_STATE_ENABLED 0x01
-#define LED_STATE_CLAIMED 0x02
-#define LED_TIMER_ON 0x04
-
-#define GPIO_IDLE GPIO_LED_GREEN
-#define GPIO_TIMER GPIO_LED_RED
-
-
-void h2p2_dbg_leds_event(led_event_t evt)
-{
- unsigned long flags;
-
- static struct h2p2_dbg_fpga __iomem *fpga;
- static u16 led_state, hw_led_state;
-
- local_irq_save(flags);
-
- if (!(led_state & LED_STATE_ENABLED) && evt != led_start)
- goto done;
-
- switch (evt) {
- case led_start:
- if (!fpga)
- fpga = ioremap(H2P2_DBG_FPGA_START,
- H2P2_DBG_FPGA_SIZE);
- if (fpga) {
- led_state |= LED_STATE_ENABLED;
- __raw_writew(~0, &fpga->leds);
- }
- break;
-
- case led_stop:
- case led_halted:
- /* all leds off during suspend or shutdown */
-
- if (! machine_is_omap_perseus2()) {
- gpio_set_value(GPIO_TIMER, 0);
- gpio_set_value(GPIO_IDLE, 0);
- }
-
- __raw_writew(~0, &fpga->leds);
- led_state &= ~LED_STATE_ENABLED;
- if (evt == led_halted) {
- iounmap(fpga);
- fpga = NULL;
- }
-
- goto done;
-
- case led_claim:
- led_state |= LED_STATE_CLAIMED;
- hw_led_state = 0;
- break;
-
- case led_release:
- led_state &= ~LED_STATE_CLAIMED;
- break;
-
-#ifdef CONFIG_LEDS_TIMER
- case led_timer:
- led_state ^= LED_TIMER_ON;
-
- if (machine_is_omap_perseus2())
- hw_led_state ^= H2P2_DBG_FPGA_P2_LED_TIMER;
- else {
- gpio_set_value(GPIO_TIMER, led_state & LED_TIMER_ON);
- goto done;
- }
-
- break;
-#endif
-
-#ifdef CONFIG_LEDS_CPU
- case led_idle_start:
- if (machine_is_omap_perseus2())
- hw_led_state |= H2P2_DBG_FPGA_P2_LED_IDLE;
- else {
- gpio_set_value(GPIO_IDLE, 1);
- goto done;
- }
-
- break;
-
- case led_idle_end:
- if (machine_is_omap_perseus2())
- hw_led_state &= ~H2P2_DBG_FPGA_P2_LED_IDLE;
- else {
- gpio_set_value(GPIO_IDLE, 0);
- goto done;
- }
-
- break;
-#endif
-
- case led_green_on:
- hw_led_state |= H2P2_DBG_FPGA_LED_GREEN;
- break;
- case led_green_off:
- hw_led_state &= ~H2P2_DBG_FPGA_LED_GREEN;
- break;
-
- case led_amber_on:
- hw_led_state |= H2P2_DBG_FPGA_LED_AMBER;
- break;
- case led_amber_off:
- hw_led_state &= ~H2P2_DBG_FPGA_LED_AMBER;
- break;
-
- case led_red_on:
- hw_led_state |= H2P2_DBG_FPGA_LED_RED;
- break;
- case led_red_off:
- hw_led_state &= ~H2P2_DBG_FPGA_LED_RED;
- break;
-
- case led_blue_on:
- hw_led_state |= H2P2_DBG_FPGA_LED_BLUE;
- break;
- case led_blue_off:
- hw_led_state &= ~H2P2_DBG_FPGA_LED_BLUE;
- break;
-
- default:
- break;
- }
-
-
- /*
- * Actually burn the LEDs
- */
- if (led_state & LED_STATE_ENABLED)
- __raw_writew(~hw_led_state, &fpga->leds);
-
-done:
- local_irq_restore(flags);
-}
diff --git a/arch/arm/mach-omap1/leds-innovator.c b/arch/arm/mach-omap1/leds-innovator.c
deleted file mode 100644
index 9b99c28..0000000
--- a/arch/arm/mach-omap1/leds-innovator.c
+++ /dev/null
@@ -1,99 +0,0 @@
-/*
- * linux/arch/arm/mach-omap1/leds-innovator.c
- */
-#include <linux/init.h>
-
-#include <mach/hardware.h>
-#include <asm/leds.h>
-#include <asm/system.h>
-
-#include "leds.h"
-
-
-#define LED_STATE_ENABLED 1
-#define LED_STATE_CLAIMED 2
-
-static unsigned int led_state;
-static unsigned int hw_led_state;
-
-void innovator_leds_event(led_event_t evt)
-{
- unsigned long flags;
-
- local_irq_save(flags);
-
- switch (evt) {
- case led_start:
- hw_led_state = 0;
- led_state = LED_STATE_ENABLED;
- break;
-
- case led_stop:
- led_state &= ~LED_STATE_ENABLED;
- hw_led_state = 0;
- break;
-
- case led_claim:
- led_state |= LED_STATE_CLAIMED;
- hw_led_state = 0;
- break;
-
- case led_release:
- led_state &= ~LED_STATE_CLAIMED;
- hw_led_state = 0;
- break;
-
-#ifdef CONFIG_LEDS_TIMER
- case led_timer:
- if (!(led_state & LED_STATE_CLAIMED))
- hw_led_state ^= 0;
- break;
-#endif
-
-#ifdef CONFIG_LEDS_CPU
- case led_idle_start:
- if (!(led_state & LED_STATE_CLAIMED))
- hw_led_state |= 0;
- break;
-
- case led_idle_end:
- if (!(led_state & LED_STATE_CLAIMED))
- hw_led_state &= ~0;
- break;
-#endif
-
- case led_halted:
- break;
-
- case led_green_on:
- if (led_state & LED_STATE_CLAIMED)
- hw_led_state &= ~0;
- break;
-
- case led_green_off:
- if (led_state & LED_STATE_CLAIMED)
- hw_led_state |= 0;
- break;
-
- case led_amber_on:
- break;
-
- case led_amber_off:
- break;
-
- case led_red_on:
- if (led_state & LED_STATE_CLAIMED)
- hw_led_state &= ~0;
- break;
-
- case led_red_off:
- if (led_state & LED_STATE_CLAIMED)
- hw_led_state |= 0;
- break;
-
- default:
- break;
- }
-
- local_irq_restore(flags);
-}
diff --git a/arch/arm/mach-omap1/leds-osk.c b/arch/arm/mach-omap1/leds-osk.c
deleted file mode 100644
index 499d7ad..0000000
--- a/arch/arm/mach-omap1/leds-osk.c
+++ /dev/null
@@ -1,115 +0,0 @@
-/*
- * linux/arch/arm/mach-omap1/leds-osk.c
- *
- * LED driver for OSK with optional Mistral QVGA board
- */
-#include <linux/init.h>
-
-#include <mach/hardware.h>
-#include <asm/leds.h>
-#include <asm/system.h>
-
-#include <mach/gpio.h>
-
-#include "leds.h"
-
-
-#define LED_STATE_ENABLED (1 << 0)
-#define LED_STATE_CLAIMED (1 << 1)
-static u8 led_state;
-
-#define TIMER_LED (1 << 3) /* Mistral board */
-#define IDLE_LED (1 << 4) /* Mistral board */
-static u8 hw_led_state;
-
-
-#ifdef CONFIG_OMAP_OSK_MISTRAL
-
-/* For now, all system indicators require the Mistral board, since that
- * LED can be manipulated without a task context. This LED is either red,
- * or green, but not both; it can't give the full "disco led" effect.
- */
-
-#define GPIO_LED_RED 3
-#define GPIO_LED_GREEN OMAP_MPUIO(4)
-
-static void mistral_setled(void)
-{
- int red = 0;
- int green = 0;
-
- if (hw_led_state & TIMER_LED)
- red = 1;
- else if (hw_led_state & IDLE_LED)
- green = 1;
- /* else both sides are disabled */
-
- gpio_set_value(GPIO_LED_GREEN, green);
- gpio_set_value(GPIO_LED_RED, red);
-}
-
-#endif
-
-void osk_leds_event(led_event_t evt)
-{
- unsigned long flags;
- u16 leds;
-
- local_irq_save(flags);
-
- if (!(led_state & LED_STATE_ENABLED) && evt != led_start)
- goto done;
-
- leds = hw_led_state;
- switch (evt) {
- case led_start:
- led_state |= LED_STATE_ENABLED;
- hw_led_state = 0;
- leds = ~0;
- break;
-
- case led_halted:
- case led_stop:
- led_state &= ~LED_STATE_ENABLED;
- hw_led_state = 0;
- break;
-
- case led_claim:
- led_state |= LED_STATE_CLAIMED;
- hw_led_state = 0;
- leds = ~0;
- break;
-
- case led_release:
- led_state &= ~LED_STATE_CLAIMED;
- hw_led_state = 0;
- break;
-
-#ifdef CONFIG_OMAP_OSK_MISTRAL
-
- case led_timer:
- hw_led_state ^= TIMER_LED;
- mistral_setled();
- break;
-
- case led_idle_start: /* idle == off */
- hw_led_state &= ~IDLE_LED;
- mistral_setled();
- break;
-
- case led_idle_end:
- hw_led_state |= IDLE_LED;
- mistral_setled();
- break;
-
-#endif /* CONFIG_OMAP_OSK_MISTRAL */
-
- default:
- break;
- }
-
- leds ^= hw_led_state;
-
-done:
- local_irq_restore(flags);
-}
diff --git a/arch/arm/mach-omap1/leds.c b/arch/arm/mach-omap1/leds.c
deleted file mode 100644
index 22eb11d..0000000
--- a/arch/arm/mach-omap1/leds.c
+++ /dev/null
@@ -1,69 +0,0 @@
-/*
- * linux/arch/arm/mach-omap1/leds.c
- *
- * OMAP LEDs dispatcher
- */
-#include <linux/kernel.h>
-#include <linux/init.h>
-
-#include <asm/leds.h>
-#include <asm/mach-types.h>
-
-#include <mach/gpio.h>
-#include <plat/mux.h>
-
-#include "leds.h"
-
-static int __init
-omap_leds_init(void)
-{
- if (!cpu_class_is_omap1())
- return -ENODEV;
-
- if (machine_is_omap_innovator())
- leds_event = innovator_leds_event;
-
- else if (machine_is_omap_h2()
- || machine_is_omap_h3()
- || machine_is_omap_perseus2())
- leds_event = h2p2_dbg_leds_event;
-
- else if (machine_is_omap_osk())
- leds_event = osk_leds_event;
-
- else
- return -1;
-
- if (machine_is_omap_h2()
- || machine_is_omap_h3()
-#ifdef CONFIG_OMAP_OSK_MISTRAL
- || machine_is_omap_osk()
-#endif
- ) {
-
- /* LED1/LED2 pins can be used as GPIO (as done here), or by
- * the LPG (works even in deep sleep!), to drive a bicolor
- * LED on the H2 sample board, and another on the H2/P2
- * "surfer" expansion board.
- *
- * The same pins drive a LED on the OSK Mistral board, but
- * that's a different kind of LED (just one color at a time).
- */
- omap_cfg_reg(P18_1610_GPIO3);
- if (gpio_request(3, "LED red") == 0)
- gpio_direction_output(3, 1);
- else
- printk(KERN_WARNING "LED: can't get GPIO3/red?\n");
-
- omap_cfg_reg(MPUIO4);
- if (gpio_request(OMAP_MPUIO(4), "LED green") == 0)
- gpio_direction_output(OMAP_MPUIO(4), 1);
- else
- printk(KERN_WARNING "LED: can't get MPUIO4/green?\n");
- }
-
- leds_event(led_start);
- return 0;
-}
-
-__initcall(omap_leds_init);
diff --git a/arch/arm/mach-omap1/leds.h b/arch/arm/mach-omap1/leds.h
deleted file mode 100644
index a1e9fed..0000000
--- a/arch/arm/mach-omap1/leds.h
+++ /dev/null
@@ -1,3 +0,0 @@
-extern void innovator_leds_event(led_event_t evt);
-extern void h2p2_dbg_leds_event(led_event_t evt);
-extern void osk_leds_event(led_event_t evt);
diff --git a/arch/arm/mach-omap1/time.c b/arch/arm/mach-omap1/time.c
index a183777..8abb067 100644
--- a/arch/arm/mach-omap1/time.c
+++ b/arch/arm/mach-omap1/time.c
@@ -47,7 +47,6 @@
#include <asm/system.h>
#include <mach/hardware.h>
-#include <asm/leds.h>
#include <asm/irq.h>
#include <asm/sched_clock.h>
diff --git a/arch/arm/mach-omap1/timer32k.c b/arch/arm/mach-omap1/timer32k.c
index 96604a5..85870a8 100644
--- a/arch/arm/mach-omap1/timer32k.c
+++ b/arch/arm/mach-omap1/timer32k.c
@@ -48,7 +48,6 @@
#include <asm/system.h>
#include <mach/hardware.h>
-#include <asm/leds.h>
#include <asm/irq.h>
#include <asm/mach/irq.h>
#include <asm/mach/time.h>
diff --git a/arch/arm/plat-omap/Kconfig b/arch/arm/plat-omap/Kconfig
index bb8f4a6..e2f9dfe 100644
--- a/arch/arm/plat-omap/Kconfig
+++ b/arch/arm/plat-omap/Kconfig
@@ -35,9 +35,8 @@ config OMAP_DEBUG_DEVICES
For debug cards on TI reference boards.
config OMAP_DEBUG_LEDS
- bool
+ def_bool y if NEW_LEDS
depends on OMAP_DEBUG_DEVICES
- default y if LEDS_CLASS
config OMAP_SMARTREFLEX
bool "SmartReflex support"
diff --git a/arch/arm/plat-omap/debug-leds.c b/arch/arm/plat-omap/debug-leds.c
index fc05b10..6afb048 100644
--- a/arch/arm/plat-omap/debug-leds.c
+++ b/arch/arm/plat-omap/debug-leds.c
@@ -1,6 +1,7 @@
/*
* linux/arch/arm/plat-omap/debug-leds.c
*
+ * Copyright 2011 by Bryan Wu <bryan.wu@canonical.com>
* Copyright 2003 by Texas Instruments Incorporated
*
* This program is free software; you can redistribute it and/or modify
@@ -8,274 +9,111 @@
* published by the Free Software Foundation.
*/
+#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/platform_device.h>
#include <linux/leds.h>
#include <linux/io.h>
+#include <linux/slab.h>
#include <mach/hardware.h>
-#include <asm/leds.h>
#include <asm/system.h>
#include <asm/mach-types.h>
#include <plat/fpga.h>
-#include <mach/gpio.h>
-
/* Many OMAP development platforms reuse the same "debug board"; these
* platforms include H2, H3, H4, and Perseus2. There are 16 LEDs on the
* debug board (all green), accessed through FPGA registers.
- *
- * The "surfer" expansion board and H2 sample board also have two-color
- * green+red LEDs (in parallel), used here for timer and idle indicators
- * in preference to the ones on the debug board, for a "Disco LED" effect.
- *
- * This driver exports either the original ARM LED API, the new generic
- * one, or both.
- */
-
-static spinlock_t lock;
-static struct h2p2_dbg_fpga __iomem *fpga;
-static u16 led_state, hw_led_state;
-
-
-#ifdef CONFIG_OMAP_DEBUG_LEDS
-#define new_led_api() 1
-#else
-#define new_led_api() 0
-#endif
-
-
-/*-------------------------------------------------------------------------*/
-
-/* original ARM debug LED API:
- * - timer and idle leds (some boards use non-FPGA leds here);
- * - up to 4 generic leds, easily accessed in-kernel (any context)
*/
-#define GPIO_LED_RED 3
-#define GPIO_LED_GREEN OMAP_MPUIO(4)
-
-#define LED_STATE_ENABLED 0x01
-#define LED_STATE_CLAIMED 0x02
-#define LED_TIMER_ON 0x04
-
-#define GPIO_IDLE GPIO_LED_GREEN
-#define GPIO_TIMER GPIO_LED_RED
-
-static void h2p2_dbg_leds_event(led_event_t evt)
-{
- unsigned long flags;
-
- spin_lock_irqsave(&lock, flags);
-
- if (!(led_state & LED_STATE_ENABLED) && evt != led_start)
- goto done;
+static struct h2p2_dbg_fpga __iomem *fpga;
- switch (evt) {
- case led_start:
- if (fpga)
- led_state |= LED_STATE_ENABLED;
- break;
-
- case led_stop:
- case led_halted:
- /* all leds off during suspend or shutdown */
-
- if (!(machine_is_omap_perseus2() || machine_is_omap_h4())) {
- gpio_set_value(GPIO_TIMER, 0);
- gpio_set_value(GPIO_IDLE, 0);
- }
-
- __raw_writew(~0, &fpga->leds);
- led_state &= ~LED_STATE_ENABLED;
- goto done;
-
- case led_claim:
- led_state |= LED_STATE_CLAIMED;
- hw_led_state = 0;
- break;
-
- case led_release:
- led_state &= ~LED_STATE_CLAIMED;
- break;
-
-#ifdef CONFIG_LEDS_TIMER
- case led_timer:
- led_state ^= LED_TIMER_ON;
-
- if (machine_is_omap_perseus2() || machine_is_omap_h4())
- hw_led_state ^= H2P2_DBG_FPGA_P2_LED_TIMER;
- else {
- gpio_set_value(GPIO_TIMER,
- led_state & LED_TIMER_ON);
- goto done;
- }
-
- break;
-#endif
-
-#ifdef CONFIG_LEDS_CPU
- /* LED lit iff busy */
- case led_idle_start:
- if (machine_is_omap_perseus2() || machine_is_omap_h4())
- hw_led_state &= ~H2P2_DBG_FPGA_P2_LED_IDLE;
- else {
- gpio_set_value(GPIO_IDLE, 1);
- goto done;
- }
-
- break;
-
- case led_idle_end:
- if (machine_is_omap_perseus2() || machine_is_omap_h4())
- hw_led_state |= H2P2_DBG_FPGA_P2_LED_IDLE;
- else {
- gpio_set_value(GPIO_IDLE, 0);
- goto done;
- }
-
- break;
-#endif
-
- case led_green_on:
- hw_led_state |= H2P2_DBG_FPGA_LED_GREEN;
- break;
- case led_green_off:
- hw_led_state &= ~H2P2_DBG_FPGA_LED_GREEN;
- break;
-
- case led_amber_on:
- hw_led_state |= H2P2_DBG_FPGA_LED_AMBER;
- break;
- case led_amber_off:
- hw_led_state &= ~H2P2_DBG_FPGA_LED_AMBER;
- break;
-
- case led_red_on:
- hw_led_state |= H2P2_DBG_FPGA_LED_RED;
- break;
- case led_red_off:
- hw_led_state &= ~H2P2_DBG_FPGA_LED_RED;
- break;
-
- case led_blue_on:
- hw_led_state |= H2P2_DBG_FPGA_LED_BLUE;
- break;
- case led_blue_off:
- hw_led_state &= ~H2P2_DBG_FPGA_LED_BLUE;
- break;
-
- default:
- break;
- }
-
-
- /*
- * Actually burn the LEDs
- */
- if (led_state & LED_STATE_ENABLED)
- __raw_writew(~hw_led_state, &fpga->leds);
-
-done:
- spin_unlock_irqrestore(&lock, flags);
-}
-
-/*-------------------------------------------------------------------------*/
-
-/* "new" LED API
- * - with syfs access and generic triggering
- * - not readily accessible to in-kernel drivers
- */
+static u16 fpga_led_state;
struct dbg_led {
struct led_classdev cdev;
u16 mask;
};
-static struct dbg_led dbg_leds[] = {
- /* REVISIT at least H2 uses different timer & cpu leds... */
-#ifndef CONFIG_LEDS_TIMER
- { .mask = 1 << 0, .cdev.name = "d4:green",
- .cdev.default_trigger = "heartbeat", },
-#endif
-#ifndef CONFIG_LEDS_CPU
- { .mask = 1 << 1, .cdev.name = "d5:green", }, /* !idle */
-#endif
- { .mask = 1 << 2, .cdev.name = "d6:green", },
- { .mask = 1 << 3, .cdev.name = "d7:green", },
-
- { .mask = 1 << 4, .cdev.name = "d8:green", },
- { .mask = 1 << 5, .cdev.name = "d9:green", },
- { .mask = 1 << 6, .cdev.name = "d10:green", },
- { .mask = 1 << 7, .cdev.name = "d11:green", },
-
- { .mask = 1 << 8, .cdev.name = "d12:green", },
- { .mask = 1 << 9, .cdev.name = "d13:green", },
- { .mask = 1 << 10, .cdev.name = "d14:green", },
- { .mask = 1 << 11, .cdev.name = "d15:green", },
-
-#ifndef CONFIG_LEDS
- { .mask = 1 << 12, .cdev.name = "d16:green", },
- { .mask = 1 << 13, .cdev.name = "d17:green", },
- { .mask = 1 << 14, .cdev.name = "d18:green", },
- { .mask = 1 << 15, .cdev.name = "d19:green", },
-#endif
+static const struct {
+ const char *name;
+ const char *trigger;
+} dbg_leds[] = {
+ { "dbg:d4", "heartbeat", },
+ { "dbg:d5", "cpu0", },
+ { "dbg:d6", "default-on", },
+ { "dbg:d7", },
+ { "dbg:d8", },
+ { "dbg:d9", },
+ { "dbg:d10", },
+ { "dbg:d11", },
+ { "dbg:d12", },
+ { "dbg:d13", },
+ { "dbg:d14", },
+ { "dbg:d15", },
+ { "dbg:d16", },
+ { "dbg:d17", },
+ { "dbg:d18", },
+ { "dbg:d19", },
};
-static void
-fpga_led_set(struct led_classdev *cdev, enum led_brightness value)
+/*
+ * The triggers lines up below will only be used if the
+ * LED triggers are compiled in.
+ */
+static void dbg_led_set(struct led_classdev *cdev,
+ enum led_brightness b)
{
- struct dbg_led *led = container_of(cdev, struct dbg_led, cdev);
- unsigned long flags;
+ struct dbg_led *led = container_of(cdev, struct dbg_led, cdev);
+ u16 reg;
- spin_lock_irqsave(&lock, flags);
- if (value == LED_OFF)
- hw_led_state &= ~led->mask;
+ reg = __raw_readw(&fpga->leds);
+ if (b != LED_OFF)
+ reg |= led->mask;
else
- hw_led_state |= led->mask;
- __raw_writew(~hw_led_state, &fpga->leds);
- spin_unlock_irqrestore(&lock, flags);
+ reg &= ~led->mask;
+ __raw_writew(reg, &fpga->leds);
}
-static void __init newled_init(struct device *dev)
+static enum led_brightness dbg_led_get(struct led_classdev *cdev)
{
- unsigned i;
- struct dbg_led *led;
- int status;
+ struct dbg_led *led = container_of(cdev, struct dbg_led, cdev);
+ u16 reg;
- for (i = 0, led = dbg_leds; i < ARRAY_SIZE(dbg_leds); i++, led++) {
- led->cdev.brightness_set = fpga_led_set;
- status = led_classdev_register(dev, &led->cdev);
- if (status < 0)
- break;
- }
- return;
+ reg = __raw_readw(&fpga->leds);
+ return (reg & led->mask) ? LED_FULL : LED_OFF;
}
-
-/*-------------------------------------------------------------------------*/
-
-static int /* __init */ fpga_probe(struct platform_device *pdev)
+static int fpga_probe(struct platform_device *pdev)
{
struct resource *iomem;
-
- spin_lock_init(&lock);
+ int i;
iomem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
if (!iomem)
return -ENODEV;
fpga = ioremap(iomem->start, H2P2_DBG_FPGA_SIZE);
- __raw_writew(~0, &fpga->leds);
+ __raw_writew(0xff, &fpga->leds);
+
+ for (i = 0; i < ARRAY_SIZE(dbg_leds); i++) {
+ struct dbg_led *led;
+
+ led = kzalloc(sizeof(*led), GFP_KERNEL);
+ if (!led)
+ break;
-#ifdef CONFIG_LEDS
- leds_event = h2p2_dbg_leds_event;
- leds_event(led_start);
-#endif
+ led->cdev.name = dbg_leds[i].name;
+ led->cdev.brightness_set = dbg_led_set;
+ led->cdev.brightness_get = dbg_led_get;
+ led->cdev.default_trigger = dbg_leds[i].trigger;
+ led->mask = BIT(i);
- if (new_led_api()) {
- newled_init(&pdev->dev);
+ if (led_classdev_register(NULL, &led->cdev) < 0) {
+ kfree(led);
+ break;
+ }
}
return 0;
@@ -283,13 +121,15 @@ static int /* __init */ fpga_probe(struct platform_device *pdev)
static int fpga_suspend_noirq(struct device *dev)
{
- __raw_writew(~0, &fpga->leds);
+ fpga_led_state = __raw_readw(&fpga->leds);
+ __raw_writew(0xff, &fpga->leds);
+
return 0;
}
static int fpga_resume_noirq(struct device *dev)
{
- __raw_writew(~hw_led_state, &fpga->leds);
+ __raw_writew(~fpga_led_state, &fpga->leds);
return 0;
}
--
1.7.5
^ permalink raw reply related [flat|nested] 49+ messages in thread
* [PATCH 16/18] mach-omap1: retire custom LED code
@ 2011-08-26 9:03 ` Bryan Wu
0 siblings, 0 replies; 49+ messages in thread
From: Bryan Wu @ 2011-08-26 9:03 UTC (permalink / raw)
To: linux-arm-kernel
Signed-off-by: Bryan Wu <bryan.wu@canonical.com>
Acked-by: Tony Lindgren <tony@atomide.com>
---
arch/arm/mach-omap1/Makefile | 8 -
arch/arm/mach-omap1/board-h2.c | 34 ++++-
arch/arm/mach-omap1/board-h3.c | 34 ++++-
arch/arm/mach-omap1/board-osk.c | 33 ++++
arch/arm/mach-omap1/leds-h2p2-debug.c | 167 -------------------
arch/arm/mach-omap1/leds-innovator.c | 99 -----------
arch/arm/mach-omap1/leds-osk.c | 115 -------------
arch/arm/mach-omap1/leds.c | 69 --------
arch/arm/mach-omap1/leds.h | 3 -
arch/arm/mach-omap1/time.c | 1 -
arch/arm/mach-omap1/timer32k.c | 1 -
arch/arm/plat-omap/Kconfig | 3 +-
arch/arm/plat-omap/debug-leds.c | 292 ++++++++-------------------------
13 files changed, 166 insertions(+), 693 deletions(-)
delete mode 100644 arch/arm/mach-omap1/leds-h2p2-debug.c
delete mode 100644 arch/arm/mach-omap1/leds-innovator.c
delete mode 100644 arch/arm/mach-omap1/leds-osk.c
delete mode 100644 arch/arm/mach-omap1/leds.c
delete mode 100644 arch/arm/mach-omap1/leds.h
diff --git a/arch/arm/mach-omap1/Makefile b/arch/arm/mach-omap1/Makefile
index 5b114d1..4d2a140 100644
--- a/arch/arm/mach-omap1/Makefile
+++ b/arch/arm/mach-omap1/Makefile
@@ -54,14 +54,6 @@ obj-$(CONFIG_ARCH_OMAP850) += gpio7xx.o
obj-$(CONFIG_ARCH_OMAP15XX) += gpio15xx.o
obj-$(CONFIG_ARCH_OMAP16XX) += gpio16xx.o
-# LEDs support
-led-$(CONFIG_MACH_OMAP_H2) += leds-h2p2-debug.o
-led-$(CONFIG_MACH_OMAP_H3) += leds-h2p2-debug.o
-led-$(CONFIG_MACH_OMAP_INNOVATOR) += leds-innovator.o
-led-$(CONFIG_MACH_OMAP_PERSEUS2) += leds-h2p2-debug.o
-led-$(CONFIG_MACH_OMAP_OSK) += leds-osk.o
-obj-$(CONFIG_LEDS) += $(led-y)
-
ifneq ($(CONFIG_FB_OMAP),)
obj-y += lcd_dma.o
endif
diff --git a/arch/arm/mach-omap1/board-h2.c b/arch/arm/mach-omap1/board-h2.c
index cb7fb1a..a9f32fc 100644
--- a/arch/arm/mach-omap1/board-h2.c
+++ b/arch/arm/mach-omap1/board-h2.c
@@ -30,9 +30,10 @@
#include <linux/input.h>
#include <linux/i2c/tps65010.h>
#include <linux/smc91x.h>
+#include <linux/leds.h>
+#include <linux/gpio.h>
#include <mach/hardware.h>
-#include <asm/gpio.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
@@ -331,6 +332,32 @@ static struct platform_device h2_lcd_device = {
.id = -1,
};
+static struct gpio_led h2_gpio_led_pins[] = {
+ {
+ .name = "h2:red",
+ .default_trigger = "heartbeat",
+ .gpio = 3,
+ },
+ {
+ .name = "h2:green",
+ .default_trigger = "cpu0",
+ .gpio = OMAP_MPUIO(4),
+ },
+};
+
+static struct gpio_led_platform_data h2_gpio_led_data = {
+ .leds = h2_gpio_led_pins,
+ .num_leds = ARRAY_SIZE(h2_gpio_led_pins),
+};
+
+static struct platform_device h2_gpio_leds = {
+ .name = "leds-gpio",
+ .id = -1,
+ .dev = {
+ .platform_data = &h2_gpio_led_data,
+ },
+};
+
static struct platform_device *h2_devices[] __initdata = {
&h2_nor_device,
&h2_nand_device,
@@ -338,6 +365,7 @@ static struct platform_device *h2_devices[] __initdata = {
&h2_irda_device,
&h2_kp_device,
&h2_lcd_device,
+ &h2_gpio_leds,
};
static void __init h2_init_smc91x(void)
@@ -444,6 +472,10 @@ static void __init h2_init(void)
omap_cfg_reg(E19_1610_KBR4);
omap_cfg_reg(N19_1610_KBR5);
+ /* GPIO based LEDs */
+ omap_cfg_reg(P18_1610_GPIO3);
+ omap_cfg_reg(MPUIO4);
+
platform_add_devices(h2_devices, ARRAY_SIZE(h2_devices));
omap_board_config = h2_config;
omap_board_config_size = ARRAY_SIZE(h2_config);
diff --git a/arch/arm/mach-omap1/board-h3.c b/arch/arm/mach-omap1/board-h3.c
index 31f3487..8845734 100644
--- a/arch/arm/mach-omap1/board-h3.c
+++ b/arch/arm/mach-omap1/board-h3.c
@@ -30,11 +30,12 @@
#include <linux/spi/spi.h>
#include <linux/i2c/tps65010.h>
#include <linux/smc91x.h>
+#include <linux/gpio.h>
+#include <linux/leds.h>
#include <asm/setup.h>
#include <asm/page.h>
#include <mach/hardware.h>
-#include <asm/gpio.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
@@ -344,6 +345,32 @@ static struct spi_board_info h3_spi_board_info[] __initdata = {
},
};
+static struct gpio_led h3_gpio_led_pins[] = {
+ {
+ .name = "h3:red",
+ .default_trigger = "heartbeat",
+ .gpio = 3,
+ },
+ {
+ .name = "h3:green",
+ .default_trigger = "cpu0",
+ .gpio = OMAP_MPUIO(4),
+ },
+};
+
+static struct gpio_led_platform_data h3_gpio_led_data = {
+ .leds = h3_gpio_led_pins,
+ .num_leds = ARRAY_SIZE(h3_gpio_led_pins),
+};
+
+static struct platform_device h3_gpio_leds = {
+ .name = "leds-gpio",
+ .id = -1,
+ .dev = {
+ .platform_data = &h3_gpio_led_data,
+ },
+};
+
static struct platform_device *devices[] __initdata = {
&nor_device,
&nand_device,
@@ -351,6 +378,7 @@ static struct platform_device *devices[] __initdata = {
&intlat_device,
&h3_kp_device,
&h3_lcd_device,
+ &h3_gpio_leds,
};
static struct omap_usb_config h3_usb_config __initdata = {
@@ -424,6 +452,10 @@ static void __init h3_init(void)
omap_cfg_reg(E19_1610_KBR4);
omap_cfg_reg(N19_1610_KBR5);
+ /* GPIO based LEDs */
+ omap_cfg_reg(P18_1610_GPIO3);
+ omap_cfg_reg(MPUIO4);
+
platform_add_devices(devices, ARRAY_SIZE(devices));
spi_register_board_info(h3_spi_board_info,
ARRAY_SIZE(h3_spi_board_info));
diff --git a/arch/arm/mach-omap1/board-osk.c b/arch/arm/mach-omap1/board-osk.c
index b08a213..4ebf135 100644
--- a/arch/arm/mach-omap1/board-osk.c
+++ b/arch/arm/mach-omap1/board-osk.c
@@ -398,10 +398,37 @@ static struct platform_device osk5912_lcd_device = {
.id = -1,
};
+static struct gpio_led mistral_gpio_led_pins[] = {
+ {
+ .name = "mistral:red",
+ .default_trigger = "heartbeat",
+ .gpio = 3,
+ },
+ {
+ .name = "mistral:green",
+ .default_trigger = "cpu0",
+ .gpio = OMAP_MPUIO(4),
+ },
+};
+
+static struct gpio_led_platform_data mistral_gpio_led_data = {
+ .leds = mistral_gpio_led_pins,
+ .num_leds = ARRAY_SIZE(mistral_gpio_led_pins),
+};
+
+static struct platform_device mistral_gpio_leds = {
+ .name = "leds-gpio",
+ .id = -1,
+ .dev = {
+ .platform_data = &mistral_gpio_led_data,
+ },
+};
+
static struct platform_device *mistral_devices[] __initdata = {
&osk5912_kp_device,
&mistral_bl_device,
&osk5912_lcd_device,
+ &mistral_gpio_leds,
};
static int mistral_get_pendown_state(void)
@@ -526,6 +553,12 @@ static void __init osk_mistral_init(void)
if (gpio_request(2, "lcd_pwr") == 0)
gpio_direction_output(2, 1);
+ /*
+ * GPIO based LEDs
+ */
+ omap_cfg_reg(P18_1610_GPIO3);
+ omap_cfg_reg(MPUIO4);
+
i2c_register_board_info(1, mistral_i2c_board_info,
ARRAY_SIZE(mistral_i2c_board_info));
diff --git a/arch/arm/mach-omap1/leds-h2p2-debug.c b/arch/arm/mach-omap1/leds-h2p2-debug.c
deleted file mode 100644
index b4f9be5..0000000
--- a/arch/arm/mach-omap1/leds-h2p2-debug.c
+++ /dev/null
@@ -1,167 +0,0 @@
-/*
- * linux/arch/arm/mach-omap1/leds-h2p2-debug.c
- *
- * Copyright 2003 by Texas Instruments Incorporated
- *
- * There are 16 LEDs on the debug board (all green); four may be used
- * for logical 'green', 'amber', 'red', and 'blue' (after "claiming").
- *
- * The "surfer" expansion board and H2 sample board also have two-color
- * green+red LEDs (in parallel), used here for timer and idle indicators.
- */
-#include <linux/init.h>
-#include <linux/kernel_stat.h>
-#include <linux/sched.h>
-#include <linux/io.h>
-
-#include <mach/hardware.h>
-#include <asm/leds.h>
-#include <asm/system.h>
-#include <asm/mach-types.h>
-
-#include <plat/fpga.h>
-#include <mach/gpio.h>
-
-#include "leds.h"
-
-
-#define GPIO_LED_RED 3
-#define GPIO_LED_GREEN OMAP_MPUIO(4)
-
-
-#define LED_STATE_ENABLED 0x01
-#define LED_STATE_CLAIMED 0x02
-#define LED_TIMER_ON 0x04
-
-#define GPIO_IDLE GPIO_LED_GREEN
-#define GPIO_TIMER GPIO_LED_RED
-
-
-void h2p2_dbg_leds_event(led_event_t evt)
-{
- unsigned long flags;
-
- static struct h2p2_dbg_fpga __iomem *fpga;
- static u16 led_state, hw_led_state;
-
- local_irq_save(flags);
-
- if (!(led_state & LED_STATE_ENABLED) && evt != led_start)
- goto done;
-
- switch (evt) {
- case led_start:
- if (!fpga)
- fpga = ioremap(H2P2_DBG_FPGA_START,
- H2P2_DBG_FPGA_SIZE);
- if (fpga) {
- led_state |= LED_STATE_ENABLED;
- __raw_writew(~0, &fpga->leds);
- }
- break;
-
- case led_stop:
- case led_halted:
- /* all leds off during suspend or shutdown */
-
- if (! machine_is_omap_perseus2()) {
- gpio_set_value(GPIO_TIMER, 0);
- gpio_set_value(GPIO_IDLE, 0);
- }
-
- __raw_writew(~0, &fpga->leds);
- led_state &= ~LED_STATE_ENABLED;
- if (evt == led_halted) {
- iounmap(fpga);
- fpga = NULL;
- }
-
- goto done;
-
- case led_claim:
- led_state |= LED_STATE_CLAIMED;
- hw_led_state = 0;
- break;
-
- case led_release:
- led_state &= ~LED_STATE_CLAIMED;
- break;
-
-#ifdef CONFIG_LEDS_TIMER
- case led_timer:
- led_state ^= LED_TIMER_ON;
-
- if (machine_is_omap_perseus2())
- hw_led_state ^= H2P2_DBG_FPGA_P2_LED_TIMER;
- else {
- gpio_set_value(GPIO_TIMER, led_state & LED_TIMER_ON);
- goto done;
- }
-
- break;
-#endif
-
-#ifdef CONFIG_LEDS_CPU
- case led_idle_start:
- if (machine_is_omap_perseus2())
- hw_led_state |= H2P2_DBG_FPGA_P2_LED_IDLE;
- else {
- gpio_set_value(GPIO_IDLE, 1);
- goto done;
- }
-
- break;
-
- case led_idle_end:
- if (machine_is_omap_perseus2())
- hw_led_state &= ~H2P2_DBG_FPGA_P2_LED_IDLE;
- else {
- gpio_set_value(GPIO_IDLE, 0);
- goto done;
- }
-
- break;
-#endif
-
- case led_green_on:
- hw_led_state |= H2P2_DBG_FPGA_LED_GREEN;
- break;
- case led_green_off:
- hw_led_state &= ~H2P2_DBG_FPGA_LED_GREEN;
- break;
-
- case led_amber_on:
- hw_led_state |= H2P2_DBG_FPGA_LED_AMBER;
- break;
- case led_amber_off:
- hw_led_state &= ~H2P2_DBG_FPGA_LED_AMBER;
- break;
-
- case led_red_on:
- hw_led_state |= H2P2_DBG_FPGA_LED_RED;
- break;
- case led_red_off:
- hw_led_state &= ~H2P2_DBG_FPGA_LED_RED;
- break;
-
- case led_blue_on:
- hw_led_state |= H2P2_DBG_FPGA_LED_BLUE;
- break;
- case led_blue_off:
- hw_led_state &= ~H2P2_DBG_FPGA_LED_BLUE;
- break;
-
- default:
- break;
- }
-
-
- /*
- * Actually burn the LEDs
- */
- if (led_state & LED_STATE_ENABLED)
- __raw_writew(~hw_led_state, &fpga->leds);
-
-done:
- local_irq_restore(flags);
-}
diff --git a/arch/arm/mach-omap1/leds-innovator.c b/arch/arm/mach-omap1/leds-innovator.c
deleted file mode 100644
index 9b99c28..0000000
--- a/arch/arm/mach-omap1/leds-innovator.c
+++ /dev/null
@@ -1,99 +0,0 @@
-/*
- * linux/arch/arm/mach-omap1/leds-innovator.c
- */
-#include <linux/init.h>
-
-#include <mach/hardware.h>
-#include <asm/leds.h>
-#include <asm/system.h>
-
-#include "leds.h"
-
-
-#define LED_STATE_ENABLED 1
-#define LED_STATE_CLAIMED 2
-
-static unsigned int led_state;
-static unsigned int hw_led_state;
-
-void innovator_leds_event(led_event_t evt)
-{
- unsigned long flags;
-
- local_irq_save(flags);
-
- switch (evt) {
- case led_start:
- hw_led_state = 0;
- led_state = LED_STATE_ENABLED;
- break;
-
- case led_stop:
- led_state &= ~LED_STATE_ENABLED;
- hw_led_state = 0;
- break;
-
- case led_claim:
- led_state |= LED_STATE_CLAIMED;
- hw_led_state = 0;
- break;
-
- case led_release:
- led_state &= ~LED_STATE_CLAIMED;
- hw_led_state = 0;
- break;
-
-#ifdef CONFIG_LEDS_TIMER
- case led_timer:
- if (!(led_state & LED_STATE_CLAIMED))
- hw_led_state ^= 0;
- break;
-#endif
-
-#ifdef CONFIG_LEDS_CPU
- case led_idle_start:
- if (!(led_state & LED_STATE_CLAIMED))
- hw_led_state |= 0;
- break;
-
- case led_idle_end:
- if (!(led_state & LED_STATE_CLAIMED))
- hw_led_state &= ~0;
- break;
-#endif
-
- case led_halted:
- break;
-
- case led_green_on:
- if (led_state & LED_STATE_CLAIMED)
- hw_led_state &= ~0;
- break;
-
- case led_green_off:
- if (led_state & LED_STATE_CLAIMED)
- hw_led_state |= 0;
- break;
-
- case led_amber_on:
- break;
-
- case led_amber_off:
- break;
-
- case led_red_on:
- if (led_state & LED_STATE_CLAIMED)
- hw_led_state &= ~0;
- break;
-
- case led_red_off:
- if (led_state & LED_STATE_CLAIMED)
- hw_led_state |= 0;
- break;
-
- default:
- break;
- }
-
- local_irq_restore(flags);
-}
diff --git a/arch/arm/mach-omap1/leds-osk.c b/arch/arm/mach-omap1/leds-osk.c
deleted file mode 100644
index 499d7ad..0000000
--- a/arch/arm/mach-omap1/leds-osk.c
+++ /dev/null
@@ -1,115 +0,0 @@
-/*
- * linux/arch/arm/mach-omap1/leds-osk.c
- *
- * LED driver for OSK with optional Mistral QVGA board
- */
-#include <linux/init.h>
-
-#include <mach/hardware.h>
-#include <asm/leds.h>
-#include <asm/system.h>
-
-#include <mach/gpio.h>
-
-#include "leds.h"
-
-
-#define LED_STATE_ENABLED (1 << 0)
-#define LED_STATE_CLAIMED (1 << 1)
-static u8 led_state;
-
-#define TIMER_LED (1 << 3) /* Mistral board */
-#define IDLE_LED (1 << 4) /* Mistral board */
-static u8 hw_led_state;
-
-
-#ifdef CONFIG_OMAP_OSK_MISTRAL
-
-/* For now, all system indicators require the Mistral board, since that
- * LED can be manipulated without a task context. This LED is either red,
- * or green, but not both; it can't give the full "disco led" effect.
- */
-
-#define GPIO_LED_RED 3
-#define GPIO_LED_GREEN OMAP_MPUIO(4)
-
-static void mistral_setled(void)
-{
- int red = 0;
- int green = 0;
-
- if (hw_led_state & TIMER_LED)
- red = 1;
- else if (hw_led_state & IDLE_LED)
- green = 1;
- /* else both sides are disabled */
-
- gpio_set_value(GPIO_LED_GREEN, green);
- gpio_set_value(GPIO_LED_RED, red);
-}
-
-#endif
-
-void osk_leds_event(led_event_t evt)
-{
- unsigned long flags;
- u16 leds;
-
- local_irq_save(flags);
-
- if (!(led_state & LED_STATE_ENABLED) && evt != led_start)
- goto done;
-
- leds = hw_led_state;
- switch (evt) {
- case led_start:
- led_state |= LED_STATE_ENABLED;
- hw_led_state = 0;
- leds = ~0;
- break;
-
- case led_halted:
- case led_stop:
- led_state &= ~LED_STATE_ENABLED;
- hw_led_state = 0;
- break;
-
- case led_claim:
- led_state |= LED_STATE_CLAIMED;
- hw_led_state = 0;
- leds = ~0;
- break;
-
- case led_release:
- led_state &= ~LED_STATE_CLAIMED;
- hw_led_state = 0;
- break;
-
-#ifdef CONFIG_OMAP_OSK_MISTRAL
-
- case led_timer:
- hw_led_state ^= TIMER_LED;
- mistral_setled();
- break;
-
- case led_idle_start: /* idle == off */
- hw_led_state &= ~IDLE_LED;
- mistral_setled();
- break;
-
- case led_idle_end:
- hw_led_state |= IDLE_LED;
- mistral_setled();
- break;
-
-#endif /* CONFIG_OMAP_OSK_MISTRAL */
-
- default:
- break;
- }
-
- leds ^= hw_led_state;
-
-done:
- local_irq_restore(flags);
-}
diff --git a/arch/arm/mach-omap1/leds.c b/arch/arm/mach-omap1/leds.c
deleted file mode 100644
index 22eb11d..0000000
--- a/arch/arm/mach-omap1/leds.c
+++ /dev/null
@@ -1,69 +0,0 @@
-/*
- * linux/arch/arm/mach-omap1/leds.c
- *
- * OMAP LEDs dispatcher
- */
-#include <linux/kernel.h>
-#include <linux/init.h>
-
-#include <asm/leds.h>
-#include <asm/mach-types.h>
-
-#include <mach/gpio.h>
-#include <plat/mux.h>
-
-#include "leds.h"
-
-static int __init
-omap_leds_init(void)
-{
- if (!cpu_class_is_omap1())
- return -ENODEV;
-
- if (machine_is_omap_innovator())
- leds_event = innovator_leds_event;
-
- else if (machine_is_omap_h2()
- || machine_is_omap_h3()
- || machine_is_omap_perseus2())
- leds_event = h2p2_dbg_leds_event;
-
- else if (machine_is_omap_osk())
- leds_event = osk_leds_event;
-
- else
- return -1;
-
- if (machine_is_omap_h2()
- || machine_is_omap_h3()
-#ifdef CONFIG_OMAP_OSK_MISTRAL
- || machine_is_omap_osk()
-#endif
- ) {
-
- /* LED1/LED2 pins can be used as GPIO (as done here), or by
- * the LPG (works even in deep sleep!), to drive a bicolor
- * LED on the H2 sample board, and another on the H2/P2
- * "surfer" expansion board.
- *
- * The same pins drive a LED on the OSK Mistral board, but
- * that's a different kind of LED (just one color at a time).
- */
- omap_cfg_reg(P18_1610_GPIO3);
- if (gpio_request(3, "LED red") == 0)
- gpio_direction_output(3, 1);
- else
- printk(KERN_WARNING "LED: can't get GPIO3/red?\n");
-
- omap_cfg_reg(MPUIO4);
- if (gpio_request(OMAP_MPUIO(4), "LED green") == 0)
- gpio_direction_output(OMAP_MPUIO(4), 1);
- else
- printk(KERN_WARNING "LED: can't get MPUIO4/green?\n");
- }
-
- leds_event(led_start);
- return 0;
-}
-
-__initcall(omap_leds_init);
diff --git a/arch/arm/mach-omap1/leds.h b/arch/arm/mach-omap1/leds.h
deleted file mode 100644
index a1e9fed..0000000
--- a/arch/arm/mach-omap1/leds.h
+++ /dev/null
@@ -1,3 +0,0 @@
-extern void innovator_leds_event(led_event_t evt);
-extern void h2p2_dbg_leds_event(led_event_t evt);
-extern void osk_leds_event(led_event_t evt);
diff --git a/arch/arm/mach-omap1/time.c b/arch/arm/mach-omap1/time.c
index a183777..8abb067 100644
--- a/arch/arm/mach-omap1/time.c
+++ b/arch/arm/mach-omap1/time.c
@@ -47,7 +47,6 @@
#include <asm/system.h>
#include <mach/hardware.h>
-#include <asm/leds.h>
#include <asm/irq.h>
#include <asm/sched_clock.h>
diff --git a/arch/arm/mach-omap1/timer32k.c b/arch/arm/mach-omap1/timer32k.c
index 96604a5..85870a8 100644
--- a/arch/arm/mach-omap1/timer32k.c
+++ b/arch/arm/mach-omap1/timer32k.c
@@ -48,7 +48,6 @@
#include <asm/system.h>
#include <mach/hardware.h>
-#include <asm/leds.h>
#include <asm/irq.h>
#include <asm/mach/irq.h>
#include <asm/mach/time.h>
diff --git a/arch/arm/plat-omap/Kconfig b/arch/arm/plat-omap/Kconfig
index bb8f4a6..e2f9dfe 100644
--- a/arch/arm/plat-omap/Kconfig
+++ b/arch/arm/plat-omap/Kconfig
@@ -35,9 +35,8 @@ config OMAP_DEBUG_DEVICES
For debug cards on TI reference boards.
config OMAP_DEBUG_LEDS
- bool
+ def_bool y if NEW_LEDS
depends on OMAP_DEBUG_DEVICES
- default y if LEDS_CLASS
config OMAP_SMARTREFLEX
bool "SmartReflex support"
diff --git a/arch/arm/plat-omap/debug-leds.c b/arch/arm/plat-omap/debug-leds.c
index fc05b10..6afb048 100644
--- a/arch/arm/plat-omap/debug-leds.c
+++ b/arch/arm/plat-omap/debug-leds.c
@@ -1,6 +1,7 @@
/*
* linux/arch/arm/plat-omap/debug-leds.c
*
+ * Copyright 2011 by Bryan Wu <bryan.wu@canonical.com>
* Copyright 2003 by Texas Instruments Incorporated
*
* This program is free software; you can redistribute it and/or modify
@@ -8,274 +9,111 @@
* published by the Free Software Foundation.
*/
+#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/platform_device.h>
#include <linux/leds.h>
#include <linux/io.h>
+#include <linux/slab.h>
#include <mach/hardware.h>
-#include <asm/leds.h>
#include <asm/system.h>
#include <asm/mach-types.h>
#include <plat/fpga.h>
-#include <mach/gpio.h>
-
/* Many OMAP development platforms reuse the same "debug board"; these
* platforms include H2, H3, H4, and Perseus2. There are 16 LEDs on the
* debug board (all green), accessed through FPGA registers.
- *
- * The "surfer" expansion board and H2 sample board also have two-color
- * green+red LEDs (in parallel), used here for timer and idle indicators
- * in preference to the ones on the debug board, for a "Disco LED" effect.
- *
- * This driver exports either the original ARM LED API, the new generic
- * one, or both.
- */
-
-static spinlock_t lock;
-static struct h2p2_dbg_fpga __iomem *fpga;
-static u16 led_state, hw_led_state;
-
-
-#ifdef CONFIG_OMAP_DEBUG_LEDS
-#define new_led_api() 1
-#else
-#define new_led_api() 0
-#endif
-
-
-/*-------------------------------------------------------------------------*/
-
-/* original ARM debug LED API:
- * - timer and idle leds (some boards use non-FPGA leds here);
- * - up to 4 generic leds, easily accessed in-kernel (any context)
*/
-#define GPIO_LED_RED 3
-#define GPIO_LED_GREEN OMAP_MPUIO(4)
-
-#define LED_STATE_ENABLED 0x01
-#define LED_STATE_CLAIMED 0x02
-#define LED_TIMER_ON 0x04
-
-#define GPIO_IDLE GPIO_LED_GREEN
-#define GPIO_TIMER GPIO_LED_RED
-
-static void h2p2_dbg_leds_event(led_event_t evt)
-{
- unsigned long flags;
-
- spin_lock_irqsave(&lock, flags);
-
- if (!(led_state & LED_STATE_ENABLED) && evt != led_start)
- goto done;
+static struct h2p2_dbg_fpga __iomem *fpga;
- switch (evt) {
- case led_start:
- if (fpga)
- led_state |= LED_STATE_ENABLED;
- break;
-
- case led_stop:
- case led_halted:
- /* all leds off during suspend or shutdown */
-
- if (!(machine_is_omap_perseus2() || machine_is_omap_h4())) {
- gpio_set_value(GPIO_TIMER, 0);
- gpio_set_value(GPIO_IDLE, 0);
- }
-
- __raw_writew(~0, &fpga->leds);
- led_state &= ~LED_STATE_ENABLED;
- goto done;
-
- case led_claim:
- led_state |= LED_STATE_CLAIMED;
- hw_led_state = 0;
- break;
-
- case led_release:
- led_state &= ~LED_STATE_CLAIMED;
- break;
-
-#ifdef CONFIG_LEDS_TIMER
- case led_timer:
- led_state ^= LED_TIMER_ON;
-
- if (machine_is_omap_perseus2() || machine_is_omap_h4())
- hw_led_state ^= H2P2_DBG_FPGA_P2_LED_TIMER;
- else {
- gpio_set_value(GPIO_TIMER,
- led_state & LED_TIMER_ON);
- goto done;
- }
-
- break;
-#endif
-
-#ifdef CONFIG_LEDS_CPU
- /* LED lit iff busy */
- case led_idle_start:
- if (machine_is_omap_perseus2() || machine_is_omap_h4())
- hw_led_state &= ~H2P2_DBG_FPGA_P2_LED_IDLE;
- else {
- gpio_set_value(GPIO_IDLE, 1);
- goto done;
- }
-
- break;
-
- case led_idle_end:
- if (machine_is_omap_perseus2() || machine_is_omap_h4())
- hw_led_state |= H2P2_DBG_FPGA_P2_LED_IDLE;
- else {
- gpio_set_value(GPIO_IDLE, 0);
- goto done;
- }
-
- break;
-#endif
-
- case led_green_on:
- hw_led_state |= H2P2_DBG_FPGA_LED_GREEN;
- break;
- case led_green_off:
- hw_led_state &= ~H2P2_DBG_FPGA_LED_GREEN;
- break;
-
- case led_amber_on:
- hw_led_state |= H2P2_DBG_FPGA_LED_AMBER;
- break;
- case led_amber_off:
- hw_led_state &= ~H2P2_DBG_FPGA_LED_AMBER;
- break;
-
- case led_red_on:
- hw_led_state |= H2P2_DBG_FPGA_LED_RED;
- break;
- case led_red_off:
- hw_led_state &= ~H2P2_DBG_FPGA_LED_RED;
- break;
-
- case led_blue_on:
- hw_led_state |= H2P2_DBG_FPGA_LED_BLUE;
- break;
- case led_blue_off:
- hw_led_state &= ~H2P2_DBG_FPGA_LED_BLUE;
- break;
-
- default:
- break;
- }
-
-
- /*
- * Actually burn the LEDs
- */
- if (led_state & LED_STATE_ENABLED)
- __raw_writew(~hw_led_state, &fpga->leds);
-
-done:
- spin_unlock_irqrestore(&lock, flags);
-}
-
-/*-------------------------------------------------------------------------*/
-
-/* "new" LED API
- * - with syfs access and generic triggering
- * - not readily accessible to in-kernel drivers
- */
+static u16 fpga_led_state;
struct dbg_led {
struct led_classdev cdev;
u16 mask;
};
-static struct dbg_led dbg_leds[] = {
- /* REVISIT at least H2 uses different timer & cpu leds... */
-#ifndef CONFIG_LEDS_TIMER
- { .mask = 1 << 0, .cdev.name = "d4:green",
- .cdev.default_trigger = "heartbeat", },
-#endif
-#ifndef CONFIG_LEDS_CPU
- { .mask = 1 << 1, .cdev.name = "d5:green", }, /* !idle */
-#endif
- { .mask = 1 << 2, .cdev.name = "d6:green", },
- { .mask = 1 << 3, .cdev.name = "d7:green", },
-
- { .mask = 1 << 4, .cdev.name = "d8:green", },
- { .mask = 1 << 5, .cdev.name = "d9:green", },
- { .mask = 1 << 6, .cdev.name = "d10:green", },
- { .mask = 1 << 7, .cdev.name = "d11:green", },
-
- { .mask = 1 << 8, .cdev.name = "d12:green", },
- { .mask = 1 << 9, .cdev.name = "d13:green", },
- { .mask = 1 << 10, .cdev.name = "d14:green", },
- { .mask = 1 << 11, .cdev.name = "d15:green", },
-
-#ifndef CONFIG_LEDS
- { .mask = 1 << 12, .cdev.name = "d16:green", },
- { .mask = 1 << 13, .cdev.name = "d17:green", },
- { .mask = 1 << 14, .cdev.name = "d18:green", },
- { .mask = 1 << 15, .cdev.name = "d19:green", },
-#endif
+static const struct {
+ const char *name;
+ const char *trigger;
+} dbg_leds[] = {
+ { "dbg:d4", "heartbeat", },
+ { "dbg:d5", "cpu0", },
+ { "dbg:d6", "default-on", },
+ { "dbg:d7", },
+ { "dbg:d8", },
+ { "dbg:d9", },
+ { "dbg:d10", },
+ { "dbg:d11", },
+ { "dbg:d12", },
+ { "dbg:d13", },
+ { "dbg:d14", },
+ { "dbg:d15", },
+ { "dbg:d16", },
+ { "dbg:d17", },
+ { "dbg:d18", },
+ { "dbg:d19", },
};
-static void
-fpga_led_set(struct led_classdev *cdev, enum led_brightness value)
+/*
+ * The triggers lines up below will only be used if the
+ * LED triggers are compiled in.
+ */
+static void dbg_led_set(struct led_classdev *cdev,
+ enum led_brightness b)
{
- struct dbg_led *led = container_of(cdev, struct dbg_led, cdev);
- unsigned long flags;
+ struct dbg_led *led = container_of(cdev, struct dbg_led, cdev);
+ u16 reg;
- spin_lock_irqsave(&lock, flags);
- if (value == LED_OFF)
- hw_led_state &= ~led->mask;
+ reg = __raw_readw(&fpga->leds);
+ if (b != LED_OFF)
+ reg |= led->mask;
else
- hw_led_state |= led->mask;
- __raw_writew(~hw_led_state, &fpga->leds);
- spin_unlock_irqrestore(&lock, flags);
+ reg &= ~led->mask;
+ __raw_writew(reg, &fpga->leds);
}
-static void __init newled_init(struct device *dev)
+static enum led_brightness dbg_led_get(struct led_classdev *cdev)
{
- unsigned i;
- struct dbg_led *led;
- int status;
+ struct dbg_led *led = container_of(cdev, struct dbg_led, cdev);
+ u16 reg;
- for (i = 0, led = dbg_leds; i < ARRAY_SIZE(dbg_leds); i++, led++) {
- led->cdev.brightness_set = fpga_led_set;
- status = led_classdev_register(dev, &led->cdev);
- if (status < 0)
- break;
- }
- return;
+ reg = __raw_readw(&fpga->leds);
+ return (reg & led->mask) ? LED_FULL : LED_OFF;
}
-
-/*-------------------------------------------------------------------------*/
-
-static int /* __init */ fpga_probe(struct platform_device *pdev)
+static int fpga_probe(struct platform_device *pdev)
{
struct resource *iomem;
-
- spin_lock_init(&lock);
+ int i;
iomem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
if (!iomem)
return -ENODEV;
fpga = ioremap(iomem->start, H2P2_DBG_FPGA_SIZE);
- __raw_writew(~0, &fpga->leds);
+ __raw_writew(0xff, &fpga->leds);
+
+ for (i = 0; i < ARRAY_SIZE(dbg_leds); i++) {
+ struct dbg_led *led;
+
+ led = kzalloc(sizeof(*led), GFP_KERNEL);
+ if (!led)
+ break;
-#ifdef CONFIG_LEDS
- leds_event = h2p2_dbg_leds_event;
- leds_event(led_start);
-#endif
+ led->cdev.name = dbg_leds[i].name;
+ led->cdev.brightness_set = dbg_led_set;
+ led->cdev.brightness_get = dbg_led_get;
+ led->cdev.default_trigger = dbg_leds[i].trigger;
+ led->mask = BIT(i);
- if (new_led_api()) {
- newled_init(&pdev->dev);
+ if (led_classdev_register(NULL, &led->cdev) < 0) {
+ kfree(led);
+ break;
+ }
}
return 0;
@@ -283,13 +121,15 @@ static int /* __init */ fpga_probe(struct platform_device *pdev)
static int fpga_suspend_noirq(struct device *dev)
{
- __raw_writew(~0, &fpga->leds);
+ fpga_led_state = __raw_readw(&fpga->leds);
+ __raw_writew(0xff, &fpga->leds);
+
return 0;
}
static int fpga_resume_noirq(struct device *dev)
{
- __raw_writew(~hw_led_state, &fpga->leds);
+ __raw_writew(~fpga_led_state, &fpga->leds);
return 0;
}
--
1.7.5
^ permalink raw reply related [flat|nested] 49+ messages in thread
* [PATCH 17/18] mach-sa1100: retire custom LED code
2011-08-26 9:03 ` Bryan Wu
@ 2011-08-26 9:03 ` Bryan Wu
-1 siblings, 0 replies; 49+ messages in thread
From: Bryan Wu @ 2011-08-26 9:03 UTC (permalink / raw)
To: linux, linus.walleij, rpurdie, tony, jochen, linux,
nicolas.pitre, arnd, linux-arm-kernel, jamie, linux-kernel
Signed-off-by: Bryan Wu <bryan.wu@canonical.com>
---
arch/arm/mach-sa1100/Makefile | 9 ---
arch/arm/mach-sa1100/assabet.c | 83 +++++++++++++++++++++++++
arch/arm/mach-sa1100/badge4.c | 30 +++++++++
arch/arm/mach-sa1100/cerf.c | 42 +++++++++++++
arch/arm/mach-sa1100/hackkit.c | 32 ++++++++++
arch/arm/mach-sa1100/lart.c | 26 ++++++++
arch/arm/mach-sa1100/leds-assabet.c | 114 -----------------------------------
arch/arm/mach-sa1100/leds-badge4.c | 111 ----------------------------------
arch/arm/mach-sa1100/leds-cerf.c | 110 ---------------------------------
arch/arm/mach-sa1100/leds-hackkit.c | 112 ----------------------------------
arch/arm/mach-sa1100/leds-lart.c | 101 -------------------------------
arch/arm/mach-sa1100/leds.c | 50 ---------------
arch/arm/mach-sa1100/leds.h | 13 ----
13 files changed, 213 insertions(+), 620 deletions(-)
delete mode 100644 arch/arm/mach-sa1100/leds-assabet.c
delete mode 100644 arch/arm/mach-sa1100/leds-badge4.c
delete mode 100644 arch/arm/mach-sa1100/leds-cerf.c
delete mode 100644 arch/arm/mach-sa1100/leds-hackkit.c
delete mode 100644 arch/arm/mach-sa1100/leds-lart.c
delete mode 100644 arch/arm/mach-sa1100/leds.c
delete mode 100644 arch/arm/mach-sa1100/leds.h
diff --git a/arch/arm/mach-sa1100/Makefile b/arch/arm/mach-sa1100/Makefile
index 0063178..5f5f491 100644
--- a/arch/arm/mach-sa1100/Makefile
+++ b/arch/arm/mach-sa1100/Makefile
@@ -7,21 +7,17 @@ obj-y := clock.o generic.o gpio.o irq.o dma.o time.o #nmi-oopser.o
obj-m :=
obj-n :=
obj- :=
-led-y := leds.o
obj-$(CONFIG_CPU_FREQ_SA1100) += cpu-sa1100.o
obj-$(CONFIG_CPU_FREQ_SA1110) += cpu-sa1110.o
# Specific board support
obj-$(CONFIG_SA1100_ASSABET) += assabet.o
-led-$(CONFIG_SA1100_ASSABET) += leds-assabet.o
obj-$(CONFIG_ASSABET_NEPONSET) += neponset.o
obj-$(CONFIG_SA1100_BADGE4) += badge4.o
-led-$(CONFIG_SA1100_BADGE4) += leds-badge4.o
obj-$(CONFIG_SA1100_CERF) += cerf.o
-led-$(CONFIG_SA1100_CERF) += leds-cerf.o
obj-$(CONFIG_SA1100_COLLIE) += collie.o
@@ -29,13 +25,11 @@ obj-$(CONFIG_SA1100_H3100) += h3100.o h3xxx.o
obj-$(CONFIG_SA1100_H3600) += h3600.o h3xxx.o
obj-$(CONFIG_SA1100_HACKKIT) += hackkit.o
-led-$(CONFIG_SA1100_HACKKIT) += leds-hackkit.o
obj-$(CONFIG_SA1100_JORNADA720) += jornada720.o
obj-$(CONFIG_SA1100_JORNADA720_SSP) += jornada720_ssp.o
obj-$(CONFIG_SA1100_LART) += lart.o
-led-$(CONFIG_SA1100_LART) += leds-lart.o
obj-$(CONFIG_SA1100_NANOENGINE) += nanoengine.o
obj-$(CONFIG_PCI_NANOENGINE) += pci-nanoengine.o
@@ -46,9 +40,6 @@ obj-$(CONFIG_SA1100_SHANNON) += shannon.o
obj-$(CONFIG_SA1100_SIMPAD) += simpad.o
-# LEDs support
-obj-$(CONFIG_LEDS) += $(led-y)
-
# Miscellaneous functions
obj-$(CONFIG_PM) += pm.o sleep.o
obj-$(CONFIG_SA1100_SSP) += ssp.o
diff --git a/arch/arm/mach-sa1100/assabet.c b/arch/arm/mach-sa1100/assabet.c
index 26257df..6bf851a 100644
--- a/arch/arm/mach-sa1100/assabet.c
+++ b/arch/arm/mach-sa1100/assabet.c
@@ -19,6 +19,8 @@
#include <linux/mtd/partitions.h>
#include <linux/delay.h>
#include <linux/mm.h>
+#include <linux/leds.h>
+#include <linux/slab.h>
#include <mach/hardware.h>
#include <asm/mach-types.h>
@@ -445,6 +447,87 @@ static void __init assabet_map_io(void)
sa1100_register_uart(2, 3);
}
+/* LEDs */
+struct assabet_led {
+ struct led_classdev cdev;
+ u32 mask;
+};
+
+/*
+ * The triggers lines up below will only be used if the
+ * LED triggers are compiled in.
+ */
+static const struct {
+ const char *name;
+ const char *trigger;
+} assabet_leds[] = {
+ { "assabet:red", "cpu0",},
+ { "assabet:green", "heartbeat", },
+};
+
+/*
+ * The LED control in Assabet is reversed:
+ * - setting bit means turn off LED
+ * - clearing bit means turn on LED
+ */
+static void assabet_led_set(struct led_classdev *cdev,
+ enum led_brightness b)
+{
+ struct assabet_led *led = container_of(cdev,
+ struct assabet_led, cdev);
+
+ if (b != LED_OFF)
+ ASSABET_BCR_clear(led->mask);
+ else
+ ASSABET_BCR_set(led->mask);
+}
+
+static enum led_brightness assabet_led_get(struct led_classdev *cdev)
+{
+ struct assabet_led *led = container_of(cdev,
+ struct assabet_led, cdev);
+
+ return (ASSABET_BCR & led->mask) ? LED_OFF : LED_FULL;
+}
+
+static int __init assabet_leds_init(void)
+{
+ int i;
+
+ if (!machine_is_assabet())
+ return -ENODEV;
+
+ for (i = 0; i < ARRAY_SIZE(assabet_leds); i++) {
+ struct assabet_led *led;
+
+ led = kzalloc(sizeof(*led), GFP_KERNEL);
+ if (!led)
+ break;
+
+ led->cdev.name = assabet_leds[i].name;
+ led->cdev.brightness_set = assabet_led_set;
+ led->cdev.brightness_get = assabet_led_get;
+ led->cdev.default_trigger = assabet_leds[i].trigger;
+
+ if (!i)
+ led->mask = ASSABET_BCR_LED_RED;
+ else
+ led->mask = ASSABET_BCR_LED_GREEN;
+
+ if (led_classdev_register(NULL, &led->cdev) < 0) {
+ kfree(led);
+ break;
+ }
+ }
+
+ return 0;
+}
+
+/*
+ * Since we may have triggers on any subsystem, defer registration
+ * until after subsystem_init.
+ */
+fs_initcall(assabet_leds_init);
MACHINE_START(ASSABET, "Intel-Assabet")
.boot_params = 0xc0000100,
diff --git a/arch/arm/mach-sa1100/badge4.c b/arch/arm/mach-sa1100/badge4.c
index b4311b0..1f80a76 100644
--- a/arch/arm/mach-sa1100/badge4.c
+++ b/arch/arm/mach-sa1100/badge4.c
@@ -22,6 +22,8 @@
#include <linux/mtd/mtd.h>
#include <linux/mtd/partitions.h>
#include <linux/errno.h>
+#include <linux/gpio.h>
+#include <linux/leds.h>
#include <mach/hardware.h>
#include <asm/mach-types.h>
@@ -69,8 +71,36 @@ static struct platform_device sa1111_device = {
.resource = sa1111_resources,
};
+/* LEDs */
+struct gpio_led badge4_gpio_leds[] = {
+ {
+ .name = "badge4:red",
+ .default_trigger = "heartbeat",
+ .gpio = 7,
+ },
+ {
+ .name = "badge4:green",
+ .default_trigger = "cpu0",
+ .gpio = 9,
+ },
+};
+
+static struct gpio_led_platform_data badge4_gpio_led_info = {
+ .leds = badge4_gpio_leds,
+ .num_leds = ARRAY_SIZE(badge4_gpio_leds),
+};
+
+static struct platform_device badge4_leds = {
+ .name = "leds-gpio",
+ .id = -1,
+ .dev = {
+ .platform_data = &badge4_gpio_led_info,
+ }
+};
+
static struct platform_device *devices[] __initdata = {
&sa1111_device,
+ &badge4_leds,
};
static int __init badge4_sa1111_init(void)
diff --git a/arch/arm/mach-sa1100/cerf.c b/arch/arm/mach-sa1100/cerf.c
index 7f3da4b..5d8e8f0 100644
--- a/arch/arm/mach-sa1100/cerf.c
+++ b/arch/arm/mach-sa1100/cerf.c
@@ -17,6 +17,8 @@
#include <linux/irq.h>
#include <linux/mtd/mtd.h>
#include <linux/mtd/partitions.h>
+#include <linux/gpio.h>
+#include <linux/leds.h>
#include <asm/irq.h>
#include <mach/hardware.h>
@@ -47,8 +49,48 @@ static struct platform_device cerfuart2_device = {
.resource = cerfuart2_resources,
};
+/* LEDs */
+struct gpio_led cerf_gpio_leds[] = {
+ {
+ .name = "cerf:d0",
+ .default_trigger = "heartbeat",
+ .gpio = 0,
+ },
+ {
+ .name = "cerf:d1",
+ .default_trigger = "cpu0",
+ .gpio = 1,
+ },
+ {
+ .name = "cerf:d2",
+ .default_trigger = "default-on",
+ .gpio = 2,
+ },
+ {
+ .name = "cerf:d3",
+ .default_trigger = "default-on",
+ .gpio = 3,
+ },
+
+};
+
+static struct gpio_led_platform_data cerf_gpio_led_info = {
+ .leds = cerf_gpio_leds,
+ .num_leds = ARRAY_SIZE(cerf_gpio_leds),
+};
+
+static struct platform_device cerf_leds = {
+ .name = "leds-gpio",
+ .id = -1,
+ .dev = {
+ .platform_data = &cerf_gpio_led_info,
+ }
+};
+
+
static struct platform_device *cerf_devices[] __initdata = {
&cerfuart2_device,
+ &cerf_leds,
};
#ifdef CONFIG_SA1100_CERF_FLASH_32MB
diff --git a/arch/arm/mach-sa1100/hackkit.c b/arch/arm/mach-sa1100/hackkit.c
index db5e434..7c72323 100644
--- a/arch/arm/mach-sa1100/hackkit.c
+++ b/arch/arm/mach-sa1100/hackkit.c
@@ -21,6 +21,10 @@
#include <linux/serial_core.h>
#include <linux/mtd/mtd.h>
#include <linux/mtd/partitions.h>
+#include <linux/tty.h>
+#include <linux/gpio.h>
+#include <linux/leds.h>
+#include <linux/platform_device.h>
#include <mach/hardware.h>
#include <asm/mach-types.h>
@@ -185,9 +189,37 @@ static struct resource hackkit_flash_resource = {
.flags = IORESOURCE_MEM,
};
+/* LEDs */
+struct gpio_led hackkit_gpio_leds[] = {
+ {
+ .name = "hackkit:red",
+ .default_trigger = "cpu0",
+ .gpio = 22,
+ },
+ {
+ .name = "hackkit:green",
+ .default_trigger = "heartbeat",
+ .gpio = 23,
+ },
+};
+
+static struct gpio_led_platform_data hackkit_gpio_led_info = {
+ .leds = hackkit_gpio_leds,
+ .num_leds = ARRAY_SIZE(hackkit_gpio_leds),
+};
+
+static struct platform_device hackkit_leds = {
+ .name = "leds-gpio",
+ .id = -1,
+ .dev = {
+ .platform_data = &hackkit_gpio_led_info,
+ }
+};
+
static void __init hackkit_init(void)
{
sa11x0_register_mtd(&hackkit_flash_data, &hackkit_flash_resource, 1);
+ platform_device_register(&hackkit_leds);
}
/**********************************************************************
diff --git a/arch/arm/mach-sa1100/lart.c b/arch/arm/mach-sa1100/lart.c
index 7b9556b..69f21e7 100644
--- a/arch/arm/mach-sa1100/lart.c
+++ b/arch/arm/mach-sa1100/lart.c
@@ -5,6 +5,9 @@
#include <linux/init.h>
#include <linux/kernel.h>
#include <linux/tty.h>
+#include <linux/gpio.h>
+#include <linux/leds.h>
+#include <linux/platform_device.h>
#include <mach/hardware.h>
#include <asm/setup.h>
@@ -45,6 +48,27 @@ static struct map_desc lart_io_desc[] __initdata = {
}
};
+/* LEDs */
+struct gpio_led lart_gpio_leds[] = {
+ {
+ .name = "lart:red",
+ .default_trigger = "cpu0",
+ .gpio = 23,
+ },
+};
+
+static struct gpio_led_platform_data lart_gpio_led_info = {
+ .leds = lart_gpio_leds,
+ .num_leds = ARRAY_SIZE(lart_gpio_leds),
+};
+
+static struct platform_device lart_leds = {
+ .name = "leds-gpio",
+ .id = -1,
+ .dev = {
+ .platform_data = &lart_gpio_led_info,
+ }
+};
static void __init lart_map_io(void)
{
sa1100_map_io();
@@ -58,6 +82,8 @@ static void __init lart_map_io(void)
GPDR |= GPIO_UART_TXD;
GPDR &= ~GPIO_UART_RXD;
PPAR |= PPAR_UPR;
+
+ platform_device_register(&lart_leds);
}
MACHINE_START(LART, "LART")
diff --git a/arch/arm/mach-sa1100/leds-assabet.c b/arch/arm/mach-sa1100/leds-assabet.c
deleted file mode 100644
index 64e9b4b..0000000
--- a/arch/arm/mach-sa1100/leds-assabet.c
+++ /dev/null
@@ -1,114 +0,0 @@
-/*
- * linux/arch/arm/mach-sa1100/leds-assabet.c
- *
- * Copyright (C) 2000 John Dorsey <john+@cs.cmu.edu>
- *
- * Original (leds-footbridge.c) by Russell King
- *
- * Assabet uses the LEDs as follows:
- * - Green - toggles state every 50 timer interrupts
- * - Red - on if system is not idle
- */
-#include <linux/init.h>
-
-#include <mach/hardware.h>
-#include <asm/leds.h>
-#include <asm/system.h>
-#include <mach/assabet.h>
-
-#include "leds.h"
-
-
-#define LED_STATE_ENABLED 1
-#define LED_STATE_CLAIMED 2
-
-static unsigned int led_state;
-static unsigned int hw_led_state;
-
-#define ASSABET_BCR_LED_MASK (ASSABET_BCR_LED_GREEN | ASSABET_BCR_LED_RED)
-
-void assabet_leds_event(led_event_t evt)
-{
- unsigned long flags;
-
- local_irq_save(flags);
-
- switch (evt) {
- case led_start:
- hw_led_state = ASSABET_BCR_LED_RED | ASSABET_BCR_LED_GREEN;
- led_state = LED_STATE_ENABLED;
- break;
-
- case led_stop:
- led_state &= ~LED_STATE_ENABLED;
- hw_led_state = ASSABET_BCR_LED_RED | ASSABET_BCR_LED_GREEN;
- ASSABET_BCR_frob(ASSABET_BCR_LED_MASK, hw_led_state);
- break;
-
- case led_claim:
- led_state |= LED_STATE_CLAIMED;
- hw_led_state = ASSABET_BCR_LED_RED | ASSABET_BCR_LED_GREEN;
- break;
-
- case led_release:
- led_state &= ~LED_STATE_CLAIMED;
- hw_led_state = ASSABET_BCR_LED_RED | ASSABET_BCR_LED_GREEN;
- break;
-
-#ifdef CONFIG_LEDS_TIMER
- case led_timer:
- if (!(led_state & LED_STATE_CLAIMED))
- hw_led_state ^= ASSABET_BCR_LED_GREEN;
- break;
-#endif
-
-#ifdef CONFIG_LEDS_CPU
- case led_idle_start:
- if (!(led_state & LED_STATE_CLAIMED))
- hw_led_state |= ASSABET_BCR_LED_RED;
- break;
-
- case led_idle_end:
- if (!(led_state & LED_STATE_CLAIMED))
- hw_led_state &= ~ASSABET_BCR_LED_RED;
- break;
-#endif
-
- case led_halted:
- break;
-
- case led_green_on:
- if (led_state & LED_STATE_CLAIMED)
- hw_led_state &= ~ASSABET_BCR_LED_GREEN;
- break;
-
- case led_green_off:
- if (led_state & LED_STATE_CLAIMED)
- hw_led_state |= ASSABET_BCR_LED_GREEN;
- break;
-
- case led_amber_on:
- break;
-
- case led_amber_off:
- break;
-
- case led_red_on:
- if (led_state & LED_STATE_CLAIMED)
- hw_led_state &= ~ASSABET_BCR_LED_RED;
- break;
-
- case led_red_off:
- if (led_state & LED_STATE_CLAIMED)
- hw_led_state |= ASSABET_BCR_LED_RED;
- break;
-
- default:
- break;
- }
-
- if (led_state & LED_STATE_ENABLED)
- ASSABET_BCR_frob(ASSABET_BCR_LED_MASK, hw_led_state);
-
- local_irq_restore(flags);
-}
diff --git a/arch/arm/mach-sa1100/leds-badge4.c b/arch/arm/mach-sa1100/leds-badge4.c
deleted file mode 100644
index cf1e384..0000000
--- a/arch/arm/mach-sa1100/leds-badge4.c
+++ /dev/null
@@ -1,111 +0,0 @@
-/*
- * linux/arch/arm/mach-sa1100/leds-badge4.c
- *
- * Author: Christopher Hoover <ch@hpl.hp.com>
- * Copyright (C) 2002 Hewlett-Packard Company
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- */
-
-#include <linux/init.h>
-
-#include <mach/hardware.h>
-#include <asm/leds.h>
-#include <asm/system.h>
-
-#include "leds.h"
-
-#define LED_STATE_ENABLED 1
-#define LED_STATE_CLAIMED 2
-
-static unsigned int led_state;
-static unsigned int hw_led_state;
-
-#define LED_RED GPIO_GPIO(7)
-#define LED_GREEN GPIO_GPIO(9)
-#define LED_MASK (LED_RED|LED_GREEN)
-
-#define LED_IDLE LED_GREEN
-#define LED_TIMER LED_RED
-
-void badge4_leds_event(led_event_t evt)
-{
- unsigned long flags;
-
- local_irq_save(flags);
-
- switch (evt) {
- case led_start:
- GPDR |= LED_MASK;
- hw_led_state = LED_MASK;
- led_state = LED_STATE_ENABLED;
- break;
-
- case led_stop:
- led_state &= ~LED_STATE_ENABLED;
- break;
-
- case led_claim:
- led_state |= LED_STATE_CLAIMED;
- hw_led_state = LED_MASK;
- break;
-
- case led_release:
- led_state &= ~LED_STATE_CLAIMED;
- hw_led_state = LED_MASK;
- break;
-
-#ifdef CONFIG_LEDS_TIMER
- case led_timer:
- if (!(led_state & LED_STATE_CLAIMED))
- hw_led_state ^= LED_TIMER;
- break;
-#endif
-
-#ifdef CONFIG_LEDS_CPU
- case led_idle_start:
- /* LED off when system is idle */
- if (!(led_state & LED_STATE_CLAIMED))
- hw_led_state &= ~LED_IDLE;
- break;
-
- case led_idle_end:
- if (!(led_state & LED_STATE_CLAIMED))
- hw_led_state |= LED_IDLE;
- break;
-#endif
-
- case led_red_on:
- if (!(led_state & LED_STATE_CLAIMED))
- hw_led_state &= ~LED_RED;
- break;
-
- case led_red_off:
- if (!(led_state & LED_STATE_CLAIMED))
- hw_led_state |= LED_RED;
- break;
-
- case led_green_on:
- if (!(led_state & LED_STATE_CLAIMED))
- hw_led_state &= ~LED_GREEN;
- break;
-
- case led_green_off:
- if (!(led_state & LED_STATE_CLAIMED))
- hw_led_state |= LED_GREEN;
- break;
-
- default:
- break;
- }
-
- if (led_state & LED_STATE_ENABLED) {
- GPSR = hw_led_state;
- GPCR = hw_led_state ^ LED_MASK;
- }
-
- local_irq_restore(flags);
-}
diff --git a/arch/arm/mach-sa1100/leds-cerf.c b/arch/arm/mach-sa1100/leds-cerf.c
deleted file mode 100644
index 259b48e..0000000
--- a/arch/arm/mach-sa1100/leds-cerf.c
+++ /dev/null
@@ -1,110 +0,0 @@
-/*
- * linux/arch/arm/mach-sa1100/leds-cerf.c
- *
- * Author: ???
- */
-#include <linux/init.h>
-
-#include <mach/hardware.h>
-#include <asm/leds.h>
-#include <asm/system.h>
-
-#include "leds.h"
-
-
-#define LED_STATE_ENABLED 1
-#define LED_STATE_CLAIMED 2
-
-static unsigned int led_state;
-static unsigned int hw_led_state;
-
-#define LED_D0 GPIO_GPIO(0)
-#define LED_D1 GPIO_GPIO(1)
-#define LED_D2 GPIO_GPIO(2)
-#define LED_D3 GPIO_GPIO(3)
-#define LED_MASK (LED_D0|LED_D1|LED_D2|LED_D3)
-
-void cerf_leds_event(led_event_t evt)
-{
- unsigned long flags;
-
- local_irq_save(flags);
-
- switch (evt) {
- case led_start:
- hw_led_state = LED_MASK;
- led_state = LED_STATE_ENABLED;
- break;
-
- case led_stop:
- led_state &= ~LED_STATE_ENABLED;
- break;
-
- case led_claim:
- led_state |= LED_STATE_CLAIMED;
- hw_led_state = LED_MASK;
- break;
- case led_release:
- led_state &= ~LED_STATE_CLAIMED;
- hw_led_state = LED_MASK;
- break;
-
-#ifdef CONFIG_LEDS_TIMER
- case led_timer:
- if (!(led_state & LED_STATE_CLAIMED))
- hw_led_state ^= LED_D0;
- break;
-#endif
-
-#ifdef CONFIG_LEDS_CPU
- case led_idle_start:
- if (!(led_state & LED_STATE_CLAIMED))
- hw_led_state &= ~LED_D1;
- break;
-
- case led_idle_end:
- if (!(led_state & LED_STATE_CLAIMED))
- hw_led_state |= LED_D1;
- break;
-#endif
- case led_green_on:
- if (!(led_state & LED_STATE_CLAIMED))
- hw_led_state &= ~LED_D2;
- break;
-
- case led_green_off:
- if (!(led_state & LED_STATE_CLAIMED))
- hw_led_state |= LED_D2;
- break;
-
- case led_amber_on:
- if (!(led_state & LED_STATE_CLAIMED))
- hw_led_state &= ~LED_D3;
- break;
-
- case led_amber_off:
- if (!(led_state & LED_STATE_CLAIMED))
- hw_led_state |= LED_D3;
- break;
-
- case led_red_on:
- if (!(led_state & LED_STATE_CLAIMED))
- hw_led_state &= ~LED_D1;
- break;
-
- case led_red_off:
- if (!(led_state & LED_STATE_CLAIMED))
- hw_led_state |= LED_D1;
- break;
-
- default:
- break;
- }
-
- if (led_state & LED_STATE_ENABLED) {
- GPSR = hw_led_state;
- GPCR = hw_led_state ^ LED_MASK;
- }
-
- local_irq_restore(flags);
-}
diff --git a/arch/arm/mach-sa1100/leds-hackkit.c b/arch/arm/mach-sa1100/leds-hackkit.c
deleted file mode 100644
index 2bce137..0000000
--- a/arch/arm/mach-sa1100/leds-hackkit.c
+++ /dev/null
@@ -1,112 +0,0 @@
-/*
- * linux/arch/arm/mach-sa1100/leds-hackkit.c
- *
- * based on leds-lart.c
- *
- * (C) Erik Mouw (J.A.K.Mouw@its.tudelft.nl), April 21, 2000
- * (C) Stefan Eletzhofer <stefan.eletzhofer@eletztrick.de>, 2002
- *
- * The HackKit has two leds (GPIO 22/23). The red led (gpio 22) is used
- * as cpu led, the green one is used as timer led.
- */
-#include <linux/init.h>
-
-#include <mach/hardware.h>
-#include <asm/leds.h>
-#include <asm/system.h>
-
-#include "leds.h"
-
-
-#define LED_STATE_ENABLED 1
-#define LED_STATE_CLAIMED 2
-
-static unsigned int led_state;
-static unsigned int hw_led_state;
-
-#define LED_GREEN GPIO_GPIO23
-#define LED_RED GPIO_GPIO22
-#define LED_MASK (LED_RED | LED_GREEN)
-
-void hackkit_leds_event(led_event_t evt)
-{
- unsigned long flags;
-
- local_irq_save(flags);
-
- switch(evt) {
- case led_start:
- /* pin 22/23 are outputs */
- GPDR |= LED_MASK;
- hw_led_state = LED_MASK;
- led_state = LED_STATE_ENABLED;
- break;
-
- case led_stop:
- led_state &= ~LED_STATE_ENABLED;
- break;
-
- case led_claim:
- led_state |= LED_STATE_CLAIMED;
- hw_led_state = LED_MASK;
- break;
-
- case led_release:
- led_state &= ~LED_STATE_CLAIMED;
- hw_led_state = LED_MASK;
- break;
-
-#ifdef CONFIG_LEDS_TIMER
- case led_timer:
- if (!(led_state & LED_STATE_CLAIMED))
- hw_led_state ^= LED_GREEN;
- break;
-#endif
-
-#ifdef CONFIG_LEDS_CPU
- case led_idle_start:
- /* The LART people like the LED to be off when the
- system is idle... */
- if (!(led_state & LED_STATE_CLAIMED))
- hw_led_state &= ~LED_RED;
- break;
-
- case led_idle_end:
- /* ... and on if the system is not idle */
- if (!(led_state & LED_STATE_CLAIMED))
- hw_led_state |= LED_RED;
- break;
-#endif
-
- case led_red_on:
- if (led_state & LED_STATE_CLAIMED)
- hw_led_state &= ~LED_RED;
- break;
-
- case led_red_off:
- if (led_state & LED_STATE_CLAIMED)
- hw_led_state |= LED_RED;
- break;
-
- case led_green_on:
- if (led_state & LED_STATE_CLAIMED)
- hw_led_state &= ~LED_GREEN;
- break;
-
- case led_green_off:
- if (led_state & LED_STATE_CLAIMED)
- hw_led_state |= LED_GREEN;
- break;
-
- default:
- break;
- }
-
- /* Now set the GPIO state, or nothing will happen at all */
- if (led_state & LED_STATE_ENABLED) {
- GPSR = hw_led_state;
- GPCR = hw_led_state ^ LED_MASK;
- }
-
- local_irq_restore(flags);
-}
diff --git a/arch/arm/mach-sa1100/leds-lart.c b/arch/arm/mach-sa1100/leds-lart.c
deleted file mode 100644
index 0505a1f..0000000
--- a/arch/arm/mach-sa1100/leds-lart.c
+++ /dev/null
@@ -1,101 +0,0 @@
-/*
- * linux/arch/arm/mach-sa1100/leds-lart.c
- *
- * (C) Erik Mouw (J.A.K.Mouw@its.tudelft.nl), April 21, 2000
- *
- * LART uses the LED as follows:
- * - GPIO23 is the LED, on if system is not idle
- * You can use both CONFIG_LEDS_CPU and CONFIG_LEDS_TIMER at the same
- * time, but in that case the timer events will still dictate the
- * pace of the LED.
- */
-#include <linux/init.h>
-
-#include <mach/hardware.h>
-#include <asm/leds.h>
-#include <asm/system.h>
-
-#include "leds.h"
-
-
-#define LED_STATE_ENABLED 1
-#define LED_STATE_CLAIMED 2
-
-static unsigned int led_state;
-static unsigned int hw_led_state;
-
-#define LED_23 GPIO_GPIO23
-#define LED_MASK (LED_23)
-
-void lart_leds_event(led_event_t evt)
-{
- unsigned long flags;
-
- local_irq_save(flags);
-
- switch(evt) {
- case led_start:
- /* pin 23 is output pin */
- GPDR |= LED_23;
- hw_led_state = LED_MASK;
- led_state = LED_STATE_ENABLED;
- break;
-
- case led_stop:
- led_state &= ~LED_STATE_ENABLED;
- break;
-
- case led_claim:
- led_state |= LED_STATE_CLAIMED;
- hw_led_state = LED_MASK;
- break;
-
- case led_release:
- led_state &= ~LED_STATE_CLAIMED;
- hw_led_state = LED_MASK;
- break;
-
-#ifdef CONFIG_LEDS_TIMER
- case led_timer:
- if (!(led_state & LED_STATE_CLAIMED))
- hw_led_state ^= LED_23;
- break;
-#endif
-
-#ifdef CONFIG_LEDS_CPU
- case led_idle_start:
- /* The LART people like the LED to be off when the
- system is idle... */
- if (!(led_state & LED_STATE_CLAIMED))
- hw_led_state &= ~LED_23;
- break;
-
- case led_idle_end:
- /* ... and on if the system is not idle */
- if (!(led_state & LED_STATE_CLAIMED))
- hw_led_state |= LED_23;
- break;
-#endif
-
- case led_red_on:
- if (led_state & LED_STATE_CLAIMED)
- hw_led_state &= ~LED_23;
- break;
-
- case led_red_off:
- if (led_state & LED_STATE_CLAIMED)
- hw_led_state |= LED_23;
- break;
-
- default:
- break;
- }
-
- /* Now set the GPIO state, or nothing will happen at all */
- if (led_state & LED_STATE_ENABLED) {
- GPSR = hw_led_state;
- GPCR = hw_led_state ^ LED_MASK;
- }
-
- local_irq_restore(flags);
-}
diff --git a/arch/arm/mach-sa1100/leds.c b/arch/arm/mach-sa1100/leds.c
deleted file mode 100644
index 5fe71a0..0000000
--- a/arch/arm/mach-sa1100/leds.c
+++ /dev/null
@@ -1,50 +0,0 @@
-/*
- * linux/arch/arm/mach-sa1100/leds.c
- *
- * SA1100 LEDs dispatcher
- *
- * Copyright (C) 2001 Nicolas Pitre
- */
-#include <linux/compiler.h>
-#include <linux/init.h>
-
-#include <asm/leds.h>
-#include <asm/mach-types.h>
-
-#include "leds.h"
-
-static int __init
-sa1100_leds_init(void)
-{
- if (machine_is_assabet())
- leds_event = assabet_leds_event;
- if (machine_is_consus())
- leds_event = consus_leds_event;
- if (machine_is_badge4())
- leds_event = badge4_leds_event;
- if (machine_is_brutus())
- leds_event = brutus_leds_event;
- if (machine_is_cerf())
- leds_event = cerf_leds_event;
- if (machine_is_flexanet())
- leds_event = flexanet_leds_event;
- if (machine_is_graphicsclient())
- leds_event = graphicsclient_leds_event;
- if (machine_is_hackkit())
- leds_event = hackkit_leds_event;
- if (machine_is_lart())
- leds_event = lart_leds_event;
- if (machine_is_pfs168())
- leds_event = pfs168_leds_event;
- if (machine_is_graphicsmaster())
- leds_event = graphicsmaster_leds_event;
- if (machine_is_adsbitsy())
- leds_event = adsbitsy_leds_event;
- if (machine_is_pt_system3())
- leds_event = system3_leds_event;
-
- leds_event(led_start);
- return 0;
-}
-
-core_initcall(sa1100_leds_init);
diff --git a/arch/arm/mach-sa1100/leds.h b/arch/arm/mach-sa1100/leds.h
deleted file mode 100644
index 776b602..0000000
--- a/arch/arm/mach-sa1100/leds.h
+++ /dev/null
@@ -1,13 +0,0 @@
-extern void assabet_leds_event(led_event_t evt);
-extern void badge4_leds_event(led_event_t evt);
-extern void consus_leds_event(led_event_t evt);
-extern void brutus_leds_event(led_event_t evt);
-extern void cerf_leds_event(led_event_t evt);
-extern void flexanet_leds_event(led_event_t evt);
-extern void graphicsclient_leds_event(led_event_t evt);
-extern void hackkit_leds_event(led_event_t evt);
-extern void lart_leds_event(led_event_t evt);
-extern void pfs168_leds_event(led_event_t evt);
-extern void graphicsmaster_leds_event(led_event_t evt);
-extern void adsbitsy_leds_event(led_event_t evt);
-extern void system3_leds_event(led_event_t evt);
--
1.7.5
^ permalink raw reply related [flat|nested] 49+ messages in thread
* [PATCH 17/18] mach-sa1100: retire custom LED code
@ 2011-08-26 9:03 ` Bryan Wu
0 siblings, 0 replies; 49+ messages in thread
From: Bryan Wu @ 2011-08-26 9:03 UTC (permalink / raw)
To: linux-arm-kernel
Signed-off-by: Bryan Wu <bryan.wu@canonical.com>
---
arch/arm/mach-sa1100/Makefile | 9 ---
arch/arm/mach-sa1100/assabet.c | 83 +++++++++++++++++++++++++
arch/arm/mach-sa1100/badge4.c | 30 +++++++++
arch/arm/mach-sa1100/cerf.c | 42 +++++++++++++
arch/arm/mach-sa1100/hackkit.c | 32 ++++++++++
arch/arm/mach-sa1100/lart.c | 26 ++++++++
arch/arm/mach-sa1100/leds-assabet.c | 114 -----------------------------------
arch/arm/mach-sa1100/leds-badge4.c | 111 ----------------------------------
arch/arm/mach-sa1100/leds-cerf.c | 110 ---------------------------------
arch/arm/mach-sa1100/leds-hackkit.c | 112 ----------------------------------
arch/arm/mach-sa1100/leds-lart.c | 101 -------------------------------
arch/arm/mach-sa1100/leds.c | 50 ---------------
arch/arm/mach-sa1100/leds.h | 13 ----
13 files changed, 213 insertions(+), 620 deletions(-)
delete mode 100644 arch/arm/mach-sa1100/leds-assabet.c
delete mode 100644 arch/arm/mach-sa1100/leds-badge4.c
delete mode 100644 arch/arm/mach-sa1100/leds-cerf.c
delete mode 100644 arch/arm/mach-sa1100/leds-hackkit.c
delete mode 100644 arch/arm/mach-sa1100/leds-lart.c
delete mode 100644 arch/arm/mach-sa1100/leds.c
delete mode 100644 arch/arm/mach-sa1100/leds.h
diff --git a/arch/arm/mach-sa1100/Makefile b/arch/arm/mach-sa1100/Makefile
index 0063178..5f5f491 100644
--- a/arch/arm/mach-sa1100/Makefile
+++ b/arch/arm/mach-sa1100/Makefile
@@ -7,21 +7,17 @@ obj-y := clock.o generic.o gpio.o irq.o dma.o time.o #nmi-oopser.o
obj-m :=
obj-n :=
obj- :=
-led-y := leds.o
obj-$(CONFIG_CPU_FREQ_SA1100) += cpu-sa1100.o
obj-$(CONFIG_CPU_FREQ_SA1110) += cpu-sa1110.o
# Specific board support
obj-$(CONFIG_SA1100_ASSABET) += assabet.o
-led-$(CONFIG_SA1100_ASSABET) += leds-assabet.o
obj-$(CONFIG_ASSABET_NEPONSET) += neponset.o
obj-$(CONFIG_SA1100_BADGE4) += badge4.o
-led-$(CONFIG_SA1100_BADGE4) += leds-badge4.o
obj-$(CONFIG_SA1100_CERF) += cerf.o
-led-$(CONFIG_SA1100_CERF) += leds-cerf.o
obj-$(CONFIG_SA1100_COLLIE) += collie.o
@@ -29,13 +25,11 @@ obj-$(CONFIG_SA1100_H3100) += h3100.o h3xxx.o
obj-$(CONFIG_SA1100_H3600) += h3600.o h3xxx.o
obj-$(CONFIG_SA1100_HACKKIT) += hackkit.o
-led-$(CONFIG_SA1100_HACKKIT) += leds-hackkit.o
obj-$(CONFIG_SA1100_JORNADA720) += jornada720.o
obj-$(CONFIG_SA1100_JORNADA720_SSP) += jornada720_ssp.o
obj-$(CONFIG_SA1100_LART) += lart.o
-led-$(CONFIG_SA1100_LART) += leds-lart.o
obj-$(CONFIG_SA1100_NANOENGINE) += nanoengine.o
obj-$(CONFIG_PCI_NANOENGINE) += pci-nanoengine.o
@@ -46,9 +40,6 @@ obj-$(CONFIG_SA1100_SHANNON) += shannon.o
obj-$(CONFIG_SA1100_SIMPAD) += simpad.o
-# LEDs support
-obj-$(CONFIG_LEDS) += $(led-y)
-
# Miscellaneous functions
obj-$(CONFIG_PM) += pm.o sleep.o
obj-$(CONFIG_SA1100_SSP) += ssp.o
diff --git a/arch/arm/mach-sa1100/assabet.c b/arch/arm/mach-sa1100/assabet.c
index 26257df..6bf851a 100644
--- a/arch/arm/mach-sa1100/assabet.c
+++ b/arch/arm/mach-sa1100/assabet.c
@@ -19,6 +19,8 @@
#include <linux/mtd/partitions.h>
#include <linux/delay.h>
#include <linux/mm.h>
+#include <linux/leds.h>
+#include <linux/slab.h>
#include <mach/hardware.h>
#include <asm/mach-types.h>
@@ -445,6 +447,87 @@ static void __init assabet_map_io(void)
sa1100_register_uart(2, 3);
}
+/* LEDs */
+struct assabet_led {
+ struct led_classdev cdev;
+ u32 mask;
+};
+
+/*
+ * The triggers lines up below will only be used if the
+ * LED triggers are compiled in.
+ */
+static const struct {
+ const char *name;
+ const char *trigger;
+} assabet_leds[] = {
+ { "assabet:red", "cpu0",},
+ { "assabet:green", "heartbeat", },
+};
+
+/*
+ * The LED control in Assabet is reversed:
+ * - setting bit means turn off LED
+ * - clearing bit means turn on LED
+ */
+static void assabet_led_set(struct led_classdev *cdev,
+ enum led_brightness b)
+{
+ struct assabet_led *led = container_of(cdev,
+ struct assabet_led, cdev);
+
+ if (b != LED_OFF)
+ ASSABET_BCR_clear(led->mask);
+ else
+ ASSABET_BCR_set(led->mask);
+}
+
+static enum led_brightness assabet_led_get(struct led_classdev *cdev)
+{
+ struct assabet_led *led = container_of(cdev,
+ struct assabet_led, cdev);
+
+ return (ASSABET_BCR & led->mask) ? LED_OFF : LED_FULL;
+}
+
+static int __init assabet_leds_init(void)
+{
+ int i;
+
+ if (!machine_is_assabet())
+ return -ENODEV;
+
+ for (i = 0; i < ARRAY_SIZE(assabet_leds); i++) {
+ struct assabet_led *led;
+
+ led = kzalloc(sizeof(*led), GFP_KERNEL);
+ if (!led)
+ break;
+
+ led->cdev.name = assabet_leds[i].name;
+ led->cdev.brightness_set = assabet_led_set;
+ led->cdev.brightness_get = assabet_led_get;
+ led->cdev.default_trigger = assabet_leds[i].trigger;
+
+ if (!i)
+ led->mask = ASSABET_BCR_LED_RED;
+ else
+ led->mask = ASSABET_BCR_LED_GREEN;
+
+ if (led_classdev_register(NULL, &led->cdev) < 0) {
+ kfree(led);
+ break;
+ }
+ }
+
+ return 0;
+}
+
+/*
+ * Since we may have triggers on any subsystem, defer registration
+ * until after subsystem_init.
+ */
+fs_initcall(assabet_leds_init);
MACHINE_START(ASSABET, "Intel-Assabet")
.boot_params = 0xc0000100,
diff --git a/arch/arm/mach-sa1100/badge4.c b/arch/arm/mach-sa1100/badge4.c
index b4311b0..1f80a76 100644
--- a/arch/arm/mach-sa1100/badge4.c
+++ b/arch/arm/mach-sa1100/badge4.c
@@ -22,6 +22,8 @@
#include <linux/mtd/mtd.h>
#include <linux/mtd/partitions.h>
#include <linux/errno.h>
+#include <linux/gpio.h>
+#include <linux/leds.h>
#include <mach/hardware.h>
#include <asm/mach-types.h>
@@ -69,8 +71,36 @@ static struct platform_device sa1111_device = {
.resource = sa1111_resources,
};
+/* LEDs */
+struct gpio_led badge4_gpio_leds[] = {
+ {
+ .name = "badge4:red",
+ .default_trigger = "heartbeat",
+ .gpio = 7,
+ },
+ {
+ .name = "badge4:green",
+ .default_trigger = "cpu0",
+ .gpio = 9,
+ },
+};
+
+static struct gpio_led_platform_data badge4_gpio_led_info = {
+ .leds = badge4_gpio_leds,
+ .num_leds = ARRAY_SIZE(badge4_gpio_leds),
+};
+
+static struct platform_device badge4_leds = {
+ .name = "leds-gpio",
+ .id = -1,
+ .dev = {
+ .platform_data = &badge4_gpio_led_info,
+ }
+};
+
static struct platform_device *devices[] __initdata = {
&sa1111_device,
+ &badge4_leds,
};
static int __init badge4_sa1111_init(void)
diff --git a/arch/arm/mach-sa1100/cerf.c b/arch/arm/mach-sa1100/cerf.c
index 7f3da4b..5d8e8f0 100644
--- a/arch/arm/mach-sa1100/cerf.c
+++ b/arch/arm/mach-sa1100/cerf.c
@@ -17,6 +17,8 @@
#include <linux/irq.h>
#include <linux/mtd/mtd.h>
#include <linux/mtd/partitions.h>
+#include <linux/gpio.h>
+#include <linux/leds.h>
#include <asm/irq.h>
#include <mach/hardware.h>
@@ -47,8 +49,48 @@ static struct platform_device cerfuart2_device = {
.resource = cerfuart2_resources,
};
+/* LEDs */
+struct gpio_led cerf_gpio_leds[] = {
+ {
+ .name = "cerf:d0",
+ .default_trigger = "heartbeat",
+ .gpio = 0,
+ },
+ {
+ .name = "cerf:d1",
+ .default_trigger = "cpu0",
+ .gpio = 1,
+ },
+ {
+ .name = "cerf:d2",
+ .default_trigger = "default-on",
+ .gpio = 2,
+ },
+ {
+ .name = "cerf:d3",
+ .default_trigger = "default-on",
+ .gpio = 3,
+ },
+
+};
+
+static struct gpio_led_platform_data cerf_gpio_led_info = {
+ .leds = cerf_gpio_leds,
+ .num_leds = ARRAY_SIZE(cerf_gpio_leds),
+};
+
+static struct platform_device cerf_leds = {
+ .name = "leds-gpio",
+ .id = -1,
+ .dev = {
+ .platform_data = &cerf_gpio_led_info,
+ }
+};
+
+
static struct platform_device *cerf_devices[] __initdata = {
&cerfuart2_device,
+ &cerf_leds,
};
#ifdef CONFIG_SA1100_CERF_FLASH_32MB
diff --git a/arch/arm/mach-sa1100/hackkit.c b/arch/arm/mach-sa1100/hackkit.c
index db5e434..7c72323 100644
--- a/arch/arm/mach-sa1100/hackkit.c
+++ b/arch/arm/mach-sa1100/hackkit.c
@@ -21,6 +21,10 @@
#include <linux/serial_core.h>
#include <linux/mtd/mtd.h>
#include <linux/mtd/partitions.h>
+#include <linux/tty.h>
+#include <linux/gpio.h>
+#include <linux/leds.h>
+#include <linux/platform_device.h>
#include <mach/hardware.h>
#include <asm/mach-types.h>
@@ -185,9 +189,37 @@ static struct resource hackkit_flash_resource = {
.flags = IORESOURCE_MEM,
};
+/* LEDs */
+struct gpio_led hackkit_gpio_leds[] = {
+ {
+ .name = "hackkit:red",
+ .default_trigger = "cpu0",
+ .gpio = 22,
+ },
+ {
+ .name = "hackkit:green",
+ .default_trigger = "heartbeat",
+ .gpio = 23,
+ },
+};
+
+static struct gpio_led_platform_data hackkit_gpio_led_info = {
+ .leds = hackkit_gpio_leds,
+ .num_leds = ARRAY_SIZE(hackkit_gpio_leds),
+};
+
+static struct platform_device hackkit_leds = {
+ .name = "leds-gpio",
+ .id = -1,
+ .dev = {
+ .platform_data = &hackkit_gpio_led_info,
+ }
+};
+
static void __init hackkit_init(void)
{
sa11x0_register_mtd(&hackkit_flash_data, &hackkit_flash_resource, 1);
+ platform_device_register(&hackkit_leds);
}
/**********************************************************************
diff --git a/arch/arm/mach-sa1100/lart.c b/arch/arm/mach-sa1100/lart.c
index 7b9556b..69f21e7 100644
--- a/arch/arm/mach-sa1100/lart.c
+++ b/arch/arm/mach-sa1100/lart.c
@@ -5,6 +5,9 @@
#include <linux/init.h>
#include <linux/kernel.h>
#include <linux/tty.h>
+#include <linux/gpio.h>
+#include <linux/leds.h>
+#include <linux/platform_device.h>
#include <mach/hardware.h>
#include <asm/setup.h>
@@ -45,6 +48,27 @@ static struct map_desc lart_io_desc[] __initdata = {
}
};
+/* LEDs */
+struct gpio_led lart_gpio_leds[] = {
+ {
+ .name = "lart:red",
+ .default_trigger = "cpu0",
+ .gpio = 23,
+ },
+};
+
+static struct gpio_led_platform_data lart_gpio_led_info = {
+ .leds = lart_gpio_leds,
+ .num_leds = ARRAY_SIZE(lart_gpio_leds),
+};
+
+static struct platform_device lart_leds = {
+ .name = "leds-gpio",
+ .id = -1,
+ .dev = {
+ .platform_data = &lart_gpio_led_info,
+ }
+};
static void __init lart_map_io(void)
{
sa1100_map_io();
@@ -58,6 +82,8 @@ static void __init lart_map_io(void)
GPDR |= GPIO_UART_TXD;
GPDR &= ~GPIO_UART_RXD;
PPAR |= PPAR_UPR;
+
+ platform_device_register(&lart_leds);
}
MACHINE_START(LART, "LART")
diff --git a/arch/arm/mach-sa1100/leds-assabet.c b/arch/arm/mach-sa1100/leds-assabet.c
deleted file mode 100644
index 64e9b4b..0000000
--- a/arch/arm/mach-sa1100/leds-assabet.c
+++ /dev/null
@@ -1,114 +0,0 @@
-/*
- * linux/arch/arm/mach-sa1100/leds-assabet.c
- *
- * Copyright (C) 2000 John Dorsey <john+@cs.cmu.edu>
- *
- * Original (leds-footbridge.c) by Russell King
- *
- * Assabet uses the LEDs as follows:
- * - Green - toggles state every 50 timer interrupts
- * - Red - on if system is not idle
- */
-#include <linux/init.h>
-
-#include <mach/hardware.h>
-#include <asm/leds.h>
-#include <asm/system.h>
-#include <mach/assabet.h>
-
-#include "leds.h"
-
-
-#define LED_STATE_ENABLED 1
-#define LED_STATE_CLAIMED 2
-
-static unsigned int led_state;
-static unsigned int hw_led_state;
-
-#define ASSABET_BCR_LED_MASK (ASSABET_BCR_LED_GREEN | ASSABET_BCR_LED_RED)
-
-void assabet_leds_event(led_event_t evt)
-{
- unsigned long flags;
-
- local_irq_save(flags);
-
- switch (evt) {
- case led_start:
- hw_led_state = ASSABET_BCR_LED_RED | ASSABET_BCR_LED_GREEN;
- led_state = LED_STATE_ENABLED;
- break;
-
- case led_stop:
- led_state &= ~LED_STATE_ENABLED;
- hw_led_state = ASSABET_BCR_LED_RED | ASSABET_BCR_LED_GREEN;
- ASSABET_BCR_frob(ASSABET_BCR_LED_MASK, hw_led_state);
- break;
-
- case led_claim:
- led_state |= LED_STATE_CLAIMED;
- hw_led_state = ASSABET_BCR_LED_RED | ASSABET_BCR_LED_GREEN;
- break;
-
- case led_release:
- led_state &= ~LED_STATE_CLAIMED;
- hw_led_state = ASSABET_BCR_LED_RED | ASSABET_BCR_LED_GREEN;
- break;
-
-#ifdef CONFIG_LEDS_TIMER
- case led_timer:
- if (!(led_state & LED_STATE_CLAIMED))
- hw_led_state ^= ASSABET_BCR_LED_GREEN;
- break;
-#endif
-
-#ifdef CONFIG_LEDS_CPU
- case led_idle_start:
- if (!(led_state & LED_STATE_CLAIMED))
- hw_led_state |= ASSABET_BCR_LED_RED;
- break;
-
- case led_idle_end:
- if (!(led_state & LED_STATE_CLAIMED))
- hw_led_state &= ~ASSABET_BCR_LED_RED;
- break;
-#endif
-
- case led_halted:
- break;
-
- case led_green_on:
- if (led_state & LED_STATE_CLAIMED)
- hw_led_state &= ~ASSABET_BCR_LED_GREEN;
- break;
-
- case led_green_off:
- if (led_state & LED_STATE_CLAIMED)
- hw_led_state |= ASSABET_BCR_LED_GREEN;
- break;
-
- case led_amber_on:
- break;
-
- case led_amber_off:
- break;
-
- case led_red_on:
- if (led_state & LED_STATE_CLAIMED)
- hw_led_state &= ~ASSABET_BCR_LED_RED;
- break;
-
- case led_red_off:
- if (led_state & LED_STATE_CLAIMED)
- hw_led_state |= ASSABET_BCR_LED_RED;
- break;
-
- default:
- break;
- }
-
- if (led_state & LED_STATE_ENABLED)
- ASSABET_BCR_frob(ASSABET_BCR_LED_MASK, hw_led_state);
-
- local_irq_restore(flags);
-}
diff --git a/arch/arm/mach-sa1100/leds-badge4.c b/arch/arm/mach-sa1100/leds-badge4.c
deleted file mode 100644
index cf1e384..0000000
--- a/arch/arm/mach-sa1100/leds-badge4.c
+++ /dev/null
@@ -1,111 +0,0 @@
-/*
- * linux/arch/arm/mach-sa1100/leds-badge4.c
- *
- * Author: Christopher Hoover <ch@hpl.hp.com>
- * Copyright (C) 2002 Hewlett-Packard Company
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- */
-
-#include <linux/init.h>
-
-#include <mach/hardware.h>
-#include <asm/leds.h>
-#include <asm/system.h>
-
-#include "leds.h"
-
-#define LED_STATE_ENABLED 1
-#define LED_STATE_CLAIMED 2
-
-static unsigned int led_state;
-static unsigned int hw_led_state;
-
-#define LED_RED GPIO_GPIO(7)
-#define LED_GREEN GPIO_GPIO(9)
-#define LED_MASK (LED_RED|LED_GREEN)
-
-#define LED_IDLE LED_GREEN
-#define LED_TIMER LED_RED
-
-void badge4_leds_event(led_event_t evt)
-{
- unsigned long flags;
-
- local_irq_save(flags);
-
- switch (evt) {
- case led_start:
- GPDR |= LED_MASK;
- hw_led_state = LED_MASK;
- led_state = LED_STATE_ENABLED;
- break;
-
- case led_stop:
- led_state &= ~LED_STATE_ENABLED;
- break;
-
- case led_claim:
- led_state |= LED_STATE_CLAIMED;
- hw_led_state = LED_MASK;
- break;
-
- case led_release:
- led_state &= ~LED_STATE_CLAIMED;
- hw_led_state = LED_MASK;
- break;
-
-#ifdef CONFIG_LEDS_TIMER
- case led_timer:
- if (!(led_state & LED_STATE_CLAIMED))
- hw_led_state ^= LED_TIMER;
- break;
-#endif
-
-#ifdef CONFIG_LEDS_CPU
- case led_idle_start:
- /* LED off when system is idle */
- if (!(led_state & LED_STATE_CLAIMED))
- hw_led_state &= ~LED_IDLE;
- break;
-
- case led_idle_end:
- if (!(led_state & LED_STATE_CLAIMED))
- hw_led_state |= LED_IDLE;
- break;
-#endif
-
- case led_red_on:
- if (!(led_state & LED_STATE_CLAIMED))
- hw_led_state &= ~LED_RED;
- break;
-
- case led_red_off:
- if (!(led_state & LED_STATE_CLAIMED))
- hw_led_state |= LED_RED;
- break;
-
- case led_green_on:
- if (!(led_state & LED_STATE_CLAIMED))
- hw_led_state &= ~LED_GREEN;
- break;
-
- case led_green_off:
- if (!(led_state & LED_STATE_CLAIMED))
- hw_led_state |= LED_GREEN;
- break;
-
- default:
- break;
- }
-
- if (led_state & LED_STATE_ENABLED) {
- GPSR = hw_led_state;
- GPCR = hw_led_state ^ LED_MASK;
- }
-
- local_irq_restore(flags);
-}
diff --git a/arch/arm/mach-sa1100/leds-cerf.c b/arch/arm/mach-sa1100/leds-cerf.c
deleted file mode 100644
index 259b48e..0000000
--- a/arch/arm/mach-sa1100/leds-cerf.c
+++ /dev/null
@@ -1,110 +0,0 @@
-/*
- * linux/arch/arm/mach-sa1100/leds-cerf.c
- *
- * Author: ???
- */
-#include <linux/init.h>
-
-#include <mach/hardware.h>
-#include <asm/leds.h>
-#include <asm/system.h>
-
-#include "leds.h"
-
-
-#define LED_STATE_ENABLED 1
-#define LED_STATE_CLAIMED 2
-
-static unsigned int led_state;
-static unsigned int hw_led_state;
-
-#define LED_D0 GPIO_GPIO(0)
-#define LED_D1 GPIO_GPIO(1)
-#define LED_D2 GPIO_GPIO(2)
-#define LED_D3 GPIO_GPIO(3)
-#define LED_MASK (LED_D0|LED_D1|LED_D2|LED_D3)
-
-void cerf_leds_event(led_event_t evt)
-{
- unsigned long flags;
-
- local_irq_save(flags);
-
- switch (evt) {
- case led_start:
- hw_led_state = LED_MASK;
- led_state = LED_STATE_ENABLED;
- break;
-
- case led_stop:
- led_state &= ~LED_STATE_ENABLED;
- break;
-
- case led_claim:
- led_state |= LED_STATE_CLAIMED;
- hw_led_state = LED_MASK;
- break;
- case led_release:
- led_state &= ~LED_STATE_CLAIMED;
- hw_led_state = LED_MASK;
- break;
-
-#ifdef CONFIG_LEDS_TIMER
- case led_timer:
- if (!(led_state & LED_STATE_CLAIMED))
- hw_led_state ^= LED_D0;
- break;
-#endif
-
-#ifdef CONFIG_LEDS_CPU
- case led_idle_start:
- if (!(led_state & LED_STATE_CLAIMED))
- hw_led_state &= ~LED_D1;
- break;
-
- case led_idle_end:
- if (!(led_state & LED_STATE_CLAIMED))
- hw_led_state |= LED_D1;
- break;
-#endif
- case led_green_on:
- if (!(led_state & LED_STATE_CLAIMED))
- hw_led_state &= ~LED_D2;
- break;
-
- case led_green_off:
- if (!(led_state & LED_STATE_CLAIMED))
- hw_led_state |= LED_D2;
- break;
-
- case led_amber_on:
- if (!(led_state & LED_STATE_CLAIMED))
- hw_led_state &= ~LED_D3;
- break;
-
- case led_amber_off:
- if (!(led_state & LED_STATE_CLAIMED))
- hw_led_state |= LED_D3;
- break;
-
- case led_red_on:
- if (!(led_state & LED_STATE_CLAIMED))
- hw_led_state &= ~LED_D1;
- break;
-
- case led_red_off:
- if (!(led_state & LED_STATE_CLAIMED))
- hw_led_state |= LED_D1;
- break;
-
- default:
- break;
- }
-
- if (led_state & LED_STATE_ENABLED) {
- GPSR = hw_led_state;
- GPCR = hw_led_state ^ LED_MASK;
- }
-
- local_irq_restore(flags);
-}
diff --git a/arch/arm/mach-sa1100/leds-hackkit.c b/arch/arm/mach-sa1100/leds-hackkit.c
deleted file mode 100644
index 2bce137..0000000
--- a/arch/arm/mach-sa1100/leds-hackkit.c
+++ /dev/null
@@ -1,112 +0,0 @@
-/*
- * linux/arch/arm/mach-sa1100/leds-hackkit.c
- *
- * based on leds-lart.c
- *
- * (C) Erik Mouw (J.A.K.Mouw at its.tudelft.nl), April 21, 2000
- * (C) Stefan Eletzhofer <stefan.eletzhofer@eletztrick.de>, 2002
- *
- * The HackKit has two leds (GPIO 22/23). The red led (gpio 22) is used
- * as cpu led, the green one is used as timer led.
- */
-#include <linux/init.h>
-
-#include <mach/hardware.h>
-#include <asm/leds.h>
-#include <asm/system.h>
-
-#include "leds.h"
-
-
-#define LED_STATE_ENABLED 1
-#define LED_STATE_CLAIMED 2
-
-static unsigned int led_state;
-static unsigned int hw_led_state;
-
-#define LED_GREEN GPIO_GPIO23
-#define LED_RED GPIO_GPIO22
-#define LED_MASK (LED_RED | LED_GREEN)
-
-void hackkit_leds_event(led_event_t evt)
-{
- unsigned long flags;
-
- local_irq_save(flags);
-
- switch(evt) {
- case led_start:
- /* pin 22/23 are outputs */
- GPDR |= LED_MASK;
- hw_led_state = LED_MASK;
- led_state = LED_STATE_ENABLED;
- break;
-
- case led_stop:
- led_state &= ~LED_STATE_ENABLED;
- break;
-
- case led_claim:
- led_state |= LED_STATE_CLAIMED;
- hw_led_state = LED_MASK;
- break;
-
- case led_release:
- led_state &= ~LED_STATE_CLAIMED;
- hw_led_state = LED_MASK;
- break;
-
-#ifdef CONFIG_LEDS_TIMER
- case led_timer:
- if (!(led_state & LED_STATE_CLAIMED))
- hw_led_state ^= LED_GREEN;
- break;
-#endif
-
-#ifdef CONFIG_LEDS_CPU
- case led_idle_start:
- /* The LART people like the LED to be off when the
- system is idle... */
- if (!(led_state & LED_STATE_CLAIMED))
- hw_led_state &= ~LED_RED;
- break;
-
- case led_idle_end:
- /* ... and on if the system is not idle */
- if (!(led_state & LED_STATE_CLAIMED))
- hw_led_state |= LED_RED;
- break;
-#endif
-
- case led_red_on:
- if (led_state & LED_STATE_CLAIMED)
- hw_led_state &= ~LED_RED;
- break;
-
- case led_red_off:
- if (led_state & LED_STATE_CLAIMED)
- hw_led_state |= LED_RED;
- break;
-
- case led_green_on:
- if (led_state & LED_STATE_CLAIMED)
- hw_led_state &= ~LED_GREEN;
- break;
-
- case led_green_off:
- if (led_state & LED_STATE_CLAIMED)
- hw_led_state |= LED_GREEN;
- break;
-
- default:
- break;
- }
-
- /* Now set the GPIO state, or nothing will happen at all */
- if (led_state & LED_STATE_ENABLED) {
- GPSR = hw_led_state;
- GPCR = hw_led_state ^ LED_MASK;
- }
-
- local_irq_restore(flags);
-}
diff --git a/arch/arm/mach-sa1100/leds-lart.c b/arch/arm/mach-sa1100/leds-lart.c
deleted file mode 100644
index 0505a1f..0000000
--- a/arch/arm/mach-sa1100/leds-lart.c
+++ /dev/null
@@ -1,101 +0,0 @@
-/*
- * linux/arch/arm/mach-sa1100/leds-lart.c
- *
- * (C) Erik Mouw (J.A.K.Mouw at its.tudelft.nl), April 21, 2000
- *
- * LART uses the LED as follows:
- * - GPIO23 is the LED, on if system is not idle
- * You can use both CONFIG_LEDS_CPU and CONFIG_LEDS_TIMER at the same
- * time, but in that case the timer events will still dictate the
- * pace of the LED.
- */
-#include <linux/init.h>
-
-#include <mach/hardware.h>
-#include <asm/leds.h>
-#include <asm/system.h>
-
-#include "leds.h"
-
-
-#define LED_STATE_ENABLED 1
-#define LED_STATE_CLAIMED 2
-
-static unsigned int led_state;
-static unsigned int hw_led_state;
-
-#define LED_23 GPIO_GPIO23
-#define LED_MASK (LED_23)
-
-void lart_leds_event(led_event_t evt)
-{
- unsigned long flags;
-
- local_irq_save(flags);
-
- switch(evt) {
- case led_start:
- /* pin 23 is output pin */
- GPDR |= LED_23;
- hw_led_state = LED_MASK;
- led_state = LED_STATE_ENABLED;
- break;
-
- case led_stop:
- led_state &= ~LED_STATE_ENABLED;
- break;
-
- case led_claim:
- led_state |= LED_STATE_CLAIMED;
- hw_led_state = LED_MASK;
- break;
-
- case led_release:
- led_state &= ~LED_STATE_CLAIMED;
- hw_led_state = LED_MASK;
- break;
-
-#ifdef CONFIG_LEDS_TIMER
- case led_timer:
- if (!(led_state & LED_STATE_CLAIMED))
- hw_led_state ^= LED_23;
- break;
-#endif
-
-#ifdef CONFIG_LEDS_CPU
- case led_idle_start:
- /* The LART people like the LED to be off when the
- system is idle... */
- if (!(led_state & LED_STATE_CLAIMED))
- hw_led_state &= ~LED_23;
- break;
-
- case led_idle_end:
- /* ... and on if the system is not idle */
- if (!(led_state & LED_STATE_CLAIMED))
- hw_led_state |= LED_23;
- break;
-#endif
-
- case led_red_on:
- if (led_state & LED_STATE_CLAIMED)
- hw_led_state &= ~LED_23;
- break;
-
- case led_red_off:
- if (led_state & LED_STATE_CLAIMED)
- hw_led_state |= LED_23;
- break;
-
- default:
- break;
- }
-
- /* Now set the GPIO state, or nothing will happen at all */
- if (led_state & LED_STATE_ENABLED) {
- GPSR = hw_led_state;
- GPCR = hw_led_state ^ LED_MASK;
- }
-
- local_irq_restore(flags);
-}
diff --git a/arch/arm/mach-sa1100/leds.c b/arch/arm/mach-sa1100/leds.c
deleted file mode 100644
index 5fe71a0..0000000
--- a/arch/arm/mach-sa1100/leds.c
+++ /dev/null
@@ -1,50 +0,0 @@
-/*
- * linux/arch/arm/mach-sa1100/leds.c
- *
- * SA1100 LEDs dispatcher
- *
- * Copyright (C) 2001 Nicolas Pitre
- */
-#include <linux/compiler.h>
-#include <linux/init.h>
-
-#include <asm/leds.h>
-#include <asm/mach-types.h>
-
-#include "leds.h"
-
-static int __init
-sa1100_leds_init(void)
-{
- if (machine_is_assabet())
- leds_event = assabet_leds_event;
- if (machine_is_consus())
- leds_event = consus_leds_event;
- if (machine_is_badge4())
- leds_event = badge4_leds_event;
- if (machine_is_brutus())
- leds_event = brutus_leds_event;
- if (machine_is_cerf())
- leds_event = cerf_leds_event;
- if (machine_is_flexanet())
- leds_event = flexanet_leds_event;
- if (machine_is_graphicsclient())
- leds_event = graphicsclient_leds_event;
- if (machine_is_hackkit())
- leds_event = hackkit_leds_event;
- if (machine_is_lart())
- leds_event = lart_leds_event;
- if (machine_is_pfs168())
- leds_event = pfs168_leds_event;
- if (machine_is_graphicsmaster())
- leds_event = graphicsmaster_leds_event;
- if (machine_is_adsbitsy())
- leds_event = adsbitsy_leds_event;
- if (machine_is_pt_system3())
- leds_event = system3_leds_event;
-
- leds_event(led_start);
- return 0;
-}
-
-core_initcall(sa1100_leds_init);
diff --git a/arch/arm/mach-sa1100/leds.h b/arch/arm/mach-sa1100/leds.h
deleted file mode 100644
index 776b602..0000000
--- a/arch/arm/mach-sa1100/leds.h
+++ /dev/null
@@ -1,13 +0,0 @@
-extern void assabet_leds_event(led_event_t evt);
-extern void badge4_leds_event(led_event_t evt);
-extern void consus_leds_event(led_event_t evt);
-extern void brutus_leds_event(led_event_t evt);
-extern void cerf_leds_event(led_event_t evt);
-extern void flexanet_leds_event(led_event_t evt);
-extern void graphicsclient_leds_event(led_event_t evt);
-extern void hackkit_leds_event(led_event_t evt);
-extern void lart_leds_event(led_event_t evt);
-extern void pfs168_leds_event(led_event_t evt);
-extern void graphicsmaster_leds_event(led_event_t evt);
-extern void adsbitsy_leds_event(led_event_t evt);
-extern void system3_leds_event(led_event_t evt);
--
1.7.5
^ permalink raw reply related [flat|nested] 49+ messages in thread
* [PATCH 18/18] ARM: use new LEDS CPU trigger stub to replace old one
2011-08-26 9:03 ` Bryan Wu
@ 2011-08-26 9:03 ` Bryan Wu
-1 siblings, 0 replies; 49+ messages in thread
From: Bryan Wu @ 2011-08-26 9:03 UTC (permalink / raw)
To: linux, linus.walleij, rpurdie, tony, jochen, linux,
nicolas.pitre, arnd, linux-arm-kernel, jamie, linux-kernel
Cc: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Bryan Wu <bryan.wu@canonical.com>
---
arch/arm/Kconfig | 53 -------------------
arch/arm/include/asm/leds.h | 50 ------------------
arch/arm/kernel/Makefile | 1 -
arch/arm/kernel/leds.c | 119 -------------------------------------------
arch/arm/kernel/process.c | 6 +-
arch/arm/kernel/time.c | 17 ------
6 files changed, 3 insertions(+), 243 deletions(-)
delete mode 100644 arch/arm/include/asm/leds.h
delete mode 100644 arch/arm/kernel/leds.c
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index 5ebc5d9..a7235e8 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -1591,59 +1591,6 @@ config FORCE_MAX_ZONEORDER
This config option is actually maximum order plus one. For example,
a value of 11 means that the largest free memory block is 2^10 pages.
-config LEDS
- bool "Timer and CPU usage LEDs"
- depends on ARCH_CDB89712 || ARCH_EBSA110 || \
- ARCH_EBSA285 || ARCH_INTEGRATOR || \
- ARCH_LUBBOCK || MACH_MAINSTONE || ARCH_NETWINDER || \
- ARCH_OMAP || ARCH_P720T || ARCH_PXA_IDP || \
- ARCH_SA1100 || ARCH_SHARK || ARCH_VERSATILE || \
- ARCH_AT91 || ARCH_DAVINCI || \
- ARCH_KS8695 || MACH_RD88F5182 || ARCH_REALVIEW
- help
- If you say Y here, the LEDs on your machine will be used
- to provide useful information about your current system status.
-
- If you are compiling a kernel for a NetWinder or EBSA-285, you will
- be able to select which LEDs are active using the options below. If
- you are compiling a kernel for the EBSA-110 or the LART however, the
- red LED will simply flash regularly to indicate that the system is
- still functional. It is safe to say Y here if you have a CATS
- system, but the driver will do nothing.
-
-config LEDS_TIMER
- bool "Timer LED" if (!ARCH_CDB89712 && !ARCH_OMAP) || \
- OMAP_OSK_MISTRAL || MACH_OMAP_H2 \
- || MACH_OMAP_PERSEUS2
- depends on LEDS
- depends on !GENERIC_CLOCKEVENTS
- default y if ARCH_EBSA110
- help
- If you say Y here, one of the system LEDs (the green one on the
- NetWinder, the amber one on the EBSA285, or the red one on the LART)
- will flash regularly to indicate that the system is still
- operational. This is mainly useful to kernel hackers who are
- debugging unstable kernels.
-
- The LART uses the same LED for both Timer LED and CPU usage LED
- functions. You may choose to use both, but the Timer LED function
- will overrule the CPU usage LED.
-
-config LEDS_CPU
- bool "CPU usage LED" if (!ARCH_CDB89712 && !ARCH_EBSA110 && \
- !ARCH_OMAP) \
- || OMAP_OSK_MISTRAL || MACH_OMAP_H2 \
- || MACH_OMAP_PERSEUS2
- depends on LEDS
- help
- If you say Y here, the red LED will be used to give a good real
- time indication of CPU usage, by lighting whenever the idle task
- is not currently executing.
-
- The LART uses the same LED for both Timer LED and CPU usage LED
- functions. You may choose to use both, but the Timer LED function
- will overrule the CPU usage LED.
-
config ALIGNMENT_TRAP
bool
depends on CPU_CP15_MMU
diff --git a/arch/arm/include/asm/leds.h b/arch/arm/include/asm/leds.h
deleted file mode 100644
index c545739..0000000
--- a/arch/arm/include/asm/leds.h
+++ /dev/null
@@ -1,50 +0,0 @@
-/*
- * arch/arm/include/asm/leds.h
- *
- * Copyright (C) 1998 Russell King
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * Event-driven interface for LEDs on machines
- * Added led_start and led_stop- Alex Holden, 28th Dec 1998.
- */
-#ifndef ASM_ARM_LEDS_H
-#define ASM_ARM_LEDS_H
-
-
-typedef enum {
- led_idle_start,
- led_idle_end,
- led_timer,
- led_start,
- led_stop,
- led_claim, /* override idle & timer leds */
- led_release, /* restore idle & timer leds */
- led_start_timer_mode,
- led_stop_timer_mode,
- led_green_on,
- led_green_off,
- led_amber_on,
- led_amber_off,
- led_red_on,
- led_red_off,
- led_blue_on,
- led_blue_off,
- /*
- * I want this between led_timer and led_start, but
- * someone has decided to export this to user space
- */
- led_halted
-} led_event_t;
-
-/* Use this routine to handle LEDs */
-
-#ifdef CONFIG_LEDS
-extern void (*leds_event)(led_event_t);
-#else
-#define leds_event(e)
-#endif
-
-#endif
diff --git a/arch/arm/kernel/Makefile b/arch/arm/kernel/Makefile
index f7887dc..5c6c1b7 100644
--- a/arch/arm/kernel/Makefile
+++ b/arch/arm/kernel/Makefile
@@ -19,7 +19,6 @@ obj-y := elf.o entry-armv.o entry-common.o irq.o \
obj-$(CONFIG_DEPRECATED_PARAM_STRUCT) += compat.o
-obj-$(CONFIG_LEDS) += leds.o
obj-$(CONFIG_OC_ETM) += etm.o
obj-$(CONFIG_ISA_DMA_API) += dma.o
diff --git a/arch/arm/kernel/leds.c b/arch/arm/kernel/leds.c
deleted file mode 100644
index 0f107dc..0000000
--- a/arch/arm/kernel/leds.c
+++ /dev/null
@@ -1,119 +0,0 @@
-/*
- * LED support code, ripped out of arch/arm/kernel/time.c
- *
- * Copyright (C) 1994-2001 Russell King
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-#include <linux/module.h>
-#include <linux/init.h>
-#include <linux/sysdev.h>
-#include <linux/syscore_ops.h>
-
-#include <asm/leds.h>
-
-static void dummy_leds_event(led_event_t evt)
-{
-}
-
-void (*leds_event)(led_event_t) = dummy_leds_event;
-
-struct leds_evt_name {
- const char name[8];
- int on;
- int off;
-};
-
-static const struct leds_evt_name evt_names[] = {
- { "amber", led_amber_on, led_amber_off },
- { "blue", led_blue_on, led_blue_off },
- { "green", led_green_on, led_green_off },
- { "red", led_red_on, led_red_off },
-};
-
-static ssize_t leds_store(struct sys_device *dev,
- struct sysdev_attribute *attr,
- const char *buf, size_t size)
-{
- int ret = -EINVAL, len = strcspn(buf, " ");
-
- if (len > 0 && buf[len] == '\0')
- len--;
-
- if (strncmp(buf, "claim", len) == 0) {
- leds_event(led_claim);
- ret = size;
- } else if (strncmp(buf, "release", len) == 0) {
- leds_event(led_release);
- ret = size;
- } else {
- int i;
-
- for (i = 0; i < ARRAY_SIZE(evt_names); i++) {
- if (strlen(evt_names[i].name) != len ||
- strncmp(buf, evt_names[i].name, len) != 0)
- continue;
- if (strncmp(buf+len, " on", 3) == 0) {
- leds_event(evt_names[i].on);
- ret = size;
- } else if (strncmp(buf+len, " off", 4) == 0) {
- leds_event(evt_names[i].off);
- ret = size;
- }
- break;
- }
- }
- return ret;
-}
-
-static SYSDEV_ATTR(event, 0200, NULL, leds_store);
-
-static struct sysdev_class leds_sysclass = {
- .name = "leds",
-};
-
-static struct sys_device leds_device = {
- .id = 0,
- .cls = &leds_sysclass,
-};
-
-static int leds_suspend(void)
-{
- leds_event(led_stop);
- return 0;
-}
-
-static void leds_resume(void)
-{
- leds_event(led_start);
-}
-
-static void leds_shutdown(void)
-{
- leds_event(led_halted);
-}
-
-static struct syscore_ops leds_syscore_ops = {
- .shutdown = leds_shutdown,
- .suspend = leds_suspend,
- .resume = leds_resume,
-};
-
-static int __init leds_init(void)
-{
- int ret;
- ret = sysdev_class_register(&leds_sysclass);
- if (ret == 0)
- ret = sysdev_register(&leds_device);
- if (ret == 0)
- ret = sysdev_create_file(&leds_device, &attr_event);
- if (ret == 0)
- register_syscore_ops(&leds_syscore_ops);
- return ret;
-}
-
-device_initcall(leds_init);
-
-EXPORT_SYMBOL(leds_event);
diff --git a/arch/arm/kernel/process.c b/arch/arm/kernel/process.c
index 1a347f4..4b24f18 100644
--- a/arch/arm/kernel/process.c
+++ b/arch/arm/kernel/process.c
@@ -31,9 +31,9 @@
#include <linux/random.h>
#include <linux/hw_breakpoint.h>
#include <linux/cpuidle.h>
+#include <linux/leds.h>
#include <asm/cacheflush.h>
-#include <asm/leds.h>
#include <asm/processor.h>
#include <asm/system.h>
#include <asm/thread_notify.h>
@@ -184,7 +184,7 @@ void cpu_idle(void)
/* endless idle loop with no priority at all */
while (1) {
tick_nohz_stop_sched_tick(1);
- leds_event(led_idle_start);
+ ledtrig_cpu(CPU_LED_IDLE_START);
while (!need_resched()) {
#ifdef CONFIG_HOTPLUG_CPU
if (cpu_is_offline(smp_processor_id()))
@@ -209,7 +209,7 @@ void cpu_idle(void)
local_irq_enable();
}
}
- leds_event(led_idle_end);
+ ledtrig_cpu(CPU_LED_IDLE_END);
tick_nohz_restart_sched_tick();
preempt_enable_no_resched();
schedule();
diff --git a/arch/arm/kernel/time.c b/arch/arm/kernel/time.c
index cb634c3..a2a0c88 100644
--- a/arch/arm/kernel/time.c
+++ b/arch/arm/kernel/time.c
@@ -27,7 +27,6 @@
#include <linux/mc146818rtc.h>
-#include <asm/leds.h>
#include <asm/thread_info.h>
#include <asm/sched_clock.h>
#include <asm/stacktrace.h>
@@ -84,21 +83,6 @@ u32 arch_gettimeoffset(void)
}
#endif /* CONFIG_ARCH_USES_GETTIMEOFFSET */
-#ifdef CONFIG_LEDS_TIMER
-static inline void do_leds(void)
-{
- static unsigned int count = HZ/2;
-
- if (--count == 0) {
- count = HZ/2;
- leds_event(led_timer);
- }
-}
-#else
-#define do_leds()
-#endif
-
-
#ifndef CONFIG_GENERIC_CLOCKEVENTS
/*
* Kernel system timer support.
@@ -106,7 +90,6 @@ static inline void do_leds(void)
void timer_tick(void)
{
profile_tick(CPU_PROFILING);
- do_leds();
xtime_update(1);
#ifndef CONFIG_SMP
update_process_times(user_mode(get_irq_regs()));
--
1.7.5
^ permalink raw reply related [flat|nested] 49+ messages in thread
* [PATCH 18/18] ARM: use new LEDS CPU trigger stub to replace old one
@ 2011-08-26 9:03 ` Bryan Wu
0 siblings, 0 replies; 49+ messages in thread
From: Bryan Wu @ 2011-08-26 9:03 UTC (permalink / raw)
To: linux-arm-kernel
Cc: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Bryan Wu <bryan.wu@canonical.com>
---
arch/arm/Kconfig | 53 -------------------
arch/arm/include/asm/leds.h | 50 ------------------
arch/arm/kernel/Makefile | 1 -
arch/arm/kernel/leds.c | 119 -------------------------------------------
arch/arm/kernel/process.c | 6 +-
arch/arm/kernel/time.c | 17 ------
6 files changed, 3 insertions(+), 243 deletions(-)
delete mode 100644 arch/arm/include/asm/leds.h
delete mode 100644 arch/arm/kernel/leds.c
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index 5ebc5d9..a7235e8 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -1591,59 +1591,6 @@ config FORCE_MAX_ZONEORDER
This config option is actually maximum order plus one. For example,
a value of 11 means that the largest free memory block is 2^10 pages.
-config LEDS
- bool "Timer and CPU usage LEDs"
- depends on ARCH_CDB89712 || ARCH_EBSA110 || \
- ARCH_EBSA285 || ARCH_INTEGRATOR || \
- ARCH_LUBBOCK || MACH_MAINSTONE || ARCH_NETWINDER || \
- ARCH_OMAP || ARCH_P720T || ARCH_PXA_IDP || \
- ARCH_SA1100 || ARCH_SHARK || ARCH_VERSATILE || \
- ARCH_AT91 || ARCH_DAVINCI || \
- ARCH_KS8695 || MACH_RD88F5182 || ARCH_REALVIEW
- help
- If you say Y here, the LEDs on your machine will be used
- to provide useful information about your current system status.
-
- If you are compiling a kernel for a NetWinder or EBSA-285, you will
- be able to select which LEDs are active using the options below. If
- you are compiling a kernel for the EBSA-110 or the LART however, the
- red LED will simply flash regularly to indicate that the system is
- still functional. It is safe to say Y here if you have a CATS
- system, but the driver will do nothing.
-
-config LEDS_TIMER
- bool "Timer LED" if (!ARCH_CDB89712 && !ARCH_OMAP) || \
- OMAP_OSK_MISTRAL || MACH_OMAP_H2 \
- || MACH_OMAP_PERSEUS2
- depends on LEDS
- depends on !GENERIC_CLOCKEVENTS
- default y if ARCH_EBSA110
- help
- If you say Y here, one of the system LEDs (the green one on the
- NetWinder, the amber one on the EBSA285, or the red one on the LART)
- will flash regularly to indicate that the system is still
- operational. This is mainly useful to kernel hackers who are
- debugging unstable kernels.
-
- The LART uses the same LED for both Timer LED and CPU usage LED
- functions. You may choose to use both, but the Timer LED function
- will overrule the CPU usage LED.
-
-config LEDS_CPU
- bool "CPU usage LED" if (!ARCH_CDB89712 && !ARCH_EBSA110 && \
- !ARCH_OMAP) \
- || OMAP_OSK_MISTRAL || MACH_OMAP_H2 \
- || MACH_OMAP_PERSEUS2
- depends on LEDS
- help
- If you say Y here, the red LED will be used to give a good real
- time indication of CPU usage, by lighting whenever the idle task
- is not currently executing.
-
- The LART uses the same LED for both Timer LED and CPU usage LED
- functions. You may choose to use both, but the Timer LED function
- will overrule the CPU usage LED.
-
config ALIGNMENT_TRAP
bool
depends on CPU_CP15_MMU
diff --git a/arch/arm/include/asm/leds.h b/arch/arm/include/asm/leds.h
deleted file mode 100644
index c545739..0000000
--- a/arch/arm/include/asm/leds.h
+++ /dev/null
@@ -1,50 +0,0 @@
-/*
- * arch/arm/include/asm/leds.h
- *
- * Copyright (C) 1998 Russell King
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * Event-driven interface for LEDs on machines
- * Added led_start and led_stop- Alex Holden, 28th Dec 1998.
- */
-#ifndef ASM_ARM_LEDS_H
-#define ASM_ARM_LEDS_H
-
-
-typedef enum {
- led_idle_start,
- led_idle_end,
- led_timer,
- led_start,
- led_stop,
- led_claim, /* override idle & timer leds */
- led_release, /* restore idle & timer leds */
- led_start_timer_mode,
- led_stop_timer_mode,
- led_green_on,
- led_green_off,
- led_amber_on,
- led_amber_off,
- led_red_on,
- led_red_off,
- led_blue_on,
- led_blue_off,
- /*
- * I want this between led_timer and led_start, but
- * someone has decided to export this to user space
- */
- led_halted
-} led_event_t;
-
-/* Use this routine to handle LEDs */
-
-#ifdef CONFIG_LEDS
-extern void (*leds_event)(led_event_t);
-#else
-#define leds_event(e)
-#endif
-
-#endif
diff --git a/arch/arm/kernel/Makefile b/arch/arm/kernel/Makefile
index f7887dc..5c6c1b7 100644
--- a/arch/arm/kernel/Makefile
+++ b/arch/arm/kernel/Makefile
@@ -19,7 +19,6 @@ obj-y := elf.o entry-armv.o entry-common.o irq.o \
obj-$(CONFIG_DEPRECATED_PARAM_STRUCT) += compat.o
-obj-$(CONFIG_LEDS) += leds.o
obj-$(CONFIG_OC_ETM) += etm.o
obj-$(CONFIG_ISA_DMA_API) += dma.o
diff --git a/arch/arm/kernel/leds.c b/arch/arm/kernel/leds.c
deleted file mode 100644
index 0f107dc..0000000
--- a/arch/arm/kernel/leds.c
+++ /dev/null
@@ -1,119 +0,0 @@
-/*
- * LED support code, ripped out of arch/arm/kernel/time.c
- *
- * Copyright (C) 1994-2001 Russell King
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-#include <linux/module.h>
-#include <linux/init.h>
-#include <linux/sysdev.h>
-#include <linux/syscore_ops.h>
-
-#include <asm/leds.h>
-
-static void dummy_leds_event(led_event_t evt)
-{
-}
-
-void (*leds_event)(led_event_t) = dummy_leds_event;
-
-struct leds_evt_name {
- const char name[8];
- int on;
- int off;
-};
-
-static const struct leds_evt_name evt_names[] = {
- { "amber", led_amber_on, led_amber_off },
- { "blue", led_blue_on, led_blue_off },
- { "green", led_green_on, led_green_off },
- { "red", led_red_on, led_red_off },
-};
-
-static ssize_t leds_store(struct sys_device *dev,
- struct sysdev_attribute *attr,
- const char *buf, size_t size)
-{
- int ret = -EINVAL, len = strcspn(buf, " ");
-
- if (len > 0 && buf[len] == '\0')
- len--;
-
- if (strncmp(buf, "claim", len) == 0) {
- leds_event(led_claim);
- ret = size;
- } else if (strncmp(buf, "release", len) == 0) {
- leds_event(led_release);
- ret = size;
- } else {
- int i;
-
- for (i = 0; i < ARRAY_SIZE(evt_names); i++) {
- if (strlen(evt_names[i].name) != len ||
- strncmp(buf, evt_names[i].name, len) != 0)
- continue;
- if (strncmp(buf+len, " on", 3) == 0) {
- leds_event(evt_names[i].on);
- ret = size;
- } else if (strncmp(buf+len, " off", 4) == 0) {
- leds_event(evt_names[i].off);
- ret = size;
- }
- break;
- }
- }
- return ret;
-}
-
-static SYSDEV_ATTR(event, 0200, NULL, leds_store);
-
-static struct sysdev_class leds_sysclass = {
- .name = "leds",
-};
-
-static struct sys_device leds_device = {
- .id = 0,
- .cls = &leds_sysclass,
-};
-
-static int leds_suspend(void)
-{
- leds_event(led_stop);
- return 0;
-}
-
-static void leds_resume(void)
-{
- leds_event(led_start);
-}
-
-static void leds_shutdown(void)
-{
- leds_event(led_halted);
-}
-
-static struct syscore_ops leds_syscore_ops = {
- .shutdown = leds_shutdown,
- .suspend = leds_suspend,
- .resume = leds_resume,
-};
-
-static int __init leds_init(void)
-{
- int ret;
- ret = sysdev_class_register(&leds_sysclass);
- if (ret == 0)
- ret = sysdev_register(&leds_device);
- if (ret == 0)
- ret = sysdev_create_file(&leds_device, &attr_event);
- if (ret == 0)
- register_syscore_ops(&leds_syscore_ops);
- return ret;
-}
-
-device_initcall(leds_init);
-
-EXPORT_SYMBOL(leds_event);
diff --git a/arch/arm/kernel/process.c b/arch/arm/kernel/process.c
index 1a347f4..4b24f18 100644
--- a/arch/arm/kernel/process.c
+++ b/arch/arm/kernel/process.c
@@ -31,9 +31,9 @@
#include <linux/random.h>
#include <linux/hw_breakpoint.h>
#include <linux/cpuidle.h>
+#include <linux/leds.h>
#include <asm/cacheflush.h>
-#include <asm/leds.h>
#include <asm/processor.h>
#include <asm/system.h>
#include <asm/thread_notify.h>
@@ -184,7 +184,7 @@ void cpu_idle(void)
/* endless idle loop with no priority at all */
while (1) {
tick_nohz_stop_sched_tick(1);
- leds_event(led_idle_start);
+ ledtrig_cpu(CPU_LED_IDLE_START);
while (!need_resched()) {
#ifdef CONFIG_HOTPLUG_CPU
if (cpu_is_offline(smp_processor_id()))
@@ -209,7 +209,7 @@ void cpu_idle(void)
local_irq_enable();
}
}
- leds_event(led_idle_end);
+ ledtrig_cpu(CPU_LED_IDLE_END);
tick_nohz_restart_sched_tick();
preempt_enable_no_resched();
schedule();
diff --git a/arch/arm/kernel/time.c b/arch/arm/kernel/time.c
index cb634c3..a2a0c88 100644
--- a/arch/arm/kernel/time.c
+++ b/arch/arm/kernel/time.c
@@ -27,7 +27,6 @@
#include <linux/mc146818rtc.h>
-#include <asm/leds.h>
#include <asm/thread_info.h>
#include <asm/sched_clock.h>
#include <asm/stacktrace.h>
@@ -84,21 +83,6 @@ u32 arch_gettimeoffset(void)
}
#endif /* CONFIG_ARCH_USES_GETTIMEOFFSET */
-#ifdef CONFIG_LEDS_TIMER
-static inline void do_leds(void)
-{
- static unsigned int count = HZ/2;
-
- if (--count == 0) {
- count = HZ/2;
- leds_event(led_timer);
- }
-}
-#else
-#define do_leds()
-#endif
-
-
#ifndef CONFIG_GENERIC_CLOCKEVENTS
/*
* Kernel system timer support.
@@ -106,7 +90,6 @@ static inline void do_leds(void)
void timer_tick(void)
{
profile_tick(CPU_PROFILING);
- do_leds();
xtime_update(1);
#ifndef CONFIG_SMP
update_process_times(user_mode(get_irq_regs()));
--
1.7.5
^ permalink raw reply related [flat|nested] 49+ messages in thread
* Re: [PATCH v4 00/18] Introduce a led trigger for CPU activity and consolidate LED driver in ARM
2011-08-26 9:03 ` Bryan Wu
@ 2011-08-29 11:00 ` Linus Walleij
-1 siblings, 0 replies; 49+ messages in thread
From: Linus Walleij @ 2011-08-29 11:00 UTC (permalink / raw)
To: Bryan Wu, Richard Purdie
Cc: linux, tony, jochen, linux, nicolas.pitre, arnd,
linux-arm-kernel, jamie, linux-kernel
On Fri, Aug 26, 2011 at 11:03 AM, Bryan Wu <bryan.wu@canonical.com> wrote:
> Based on Linus Walleij's ARM LED consolidation work, this patchset introduce a
> new generic led trigger for CPU not only for ARM but also for others.
I think Russell was pretty clear that he saw problems inside the "new LEDs"
subsystem (drivers/leds) that need be fixed before we migrate this support
to use the LED class devices.
Can you see if you can address his comment on the earlier realview patch,
i.e. this:
http://marc.info/?l=linux-arm-kernel&m=131237280009775&w=2
rpurdie: your comments on the state of the LEDs class?
If I get time I will attempt to fix it, no clue when that will be though.
Thanks,
Linus Walleij
^ permalink raw reply [flat|nested] 49+ messages in thread
* [PATCH v4 00/18] Introduce a led trigger for CPU activity and consolidate LED driver in ARM
@ 2011-08-29 11:00 ` Linus Walleij
0 siblings, 0 replies; 49+ messages in thread
From: Linus Walleij @ 2011-08-29 11:00 UTC (permalink / raw)
To: linux-arm-kernel
On Fri, Aug 26, 2011 at 11:03 AM, Bryan Wu <bryan.wu@canonical.com> wrote:
> Based on Linus Walleij's ARM LED consolidation work, this patchset introduce a
> new generic led trigger for CPU not only for ARM but also for others.
I think Russell was pretty clear that he saw problems inside the "new LEDs"
subsystem (drivers/leds) that need be fixed before we migrate this support
to use the LED class devices.
Can you see if you can address his comment on the earlier realview patch,
i.e. this:
http://marc.info/?l=linux-arm-kernel&m=131237280009775&w=2
rpurdie: your comments on the state of the LEDs class?
If I get time I will attempt to fix it, no clue when that will be though.
Thanks,
Linus Walleij
^ permalink raw reply [flat|nested] 49+ messages in thread
* Re: [PATCH v4 00/18] Introduce a led trigger for CPU activity and consolidate LED driver in ARM
2011-08-29 11:00 ` Linus Walleij
@ 2011-08-29 13:18 ` Bryan Wu
-1 siblings, 0 replies; 49+ messages in thread
From: Bryan Wu @ 2011-08-29 13:18 UTC (permalink / raw)
To: Linus Walleij
Cc: Richard Purdie, nicolas.pitre, linux, arnd, tony, jochen,
linux-kernel, jamie, linux, linux-arm-kernel
On Mon, Aug 29, 2011 at 7:00 PM, Linus Walleij <linus.walleij@linaro.org> wrote:
> On Fri, Aug 26, 2011 at 11:03 AM, Bryan Wu <bryan.wu@canonical.com> wrote:
>
>> Based on Linus Walleij's ARM LED consolidation work, this patchset introduce a
>> new generic led trigger for CPU not only for ARM but also for others.
>
> I think Russell was pretty clear that he saw problems inside the "new LEDs"
> subsystem (drivers/leds) that need be fixed before we migrate this support
> to use the LED class devices.
>
> Can you see if you can address his comment on the earlier realview patch,
> i.e. this:
> http://marc.info/?l=linux-arm-kernel&m=131237280009775&w=2
>
Yeah, I replied that email with a patch to select LEDS_CLASS when
CONFIG_NEW_LEDS=y.
But you know, there is no comments about that.
> rpurdie: your comments on the state of the LEDs class?
>
> If I get time I will attempt to fix it, no clue when that will be though.
>
Thanks a lot, I think our ledtrig-cpu patches are quite good for
merging, although Russell has some concern about leds subsystem.
Regards,
--
Bryan Wu <bryan.wu@canonical.com>
Kernel Developer +86.138-1617-6545 Mobile
Ubuntu Kernel Team
Canonical Ltd. www.canonical.com
Ubuntu - Linux for human beings | www.ubuntu.com
^ permalink raw reply [flat|nested] 49+ messages in thread
* [PATCH v4 00/18] Introduce a led trigger for CPU activity and consolidate LED driver in ARM
@ 2011-08-29 13:18 ` Bryan Wu
0 siblings, 0 replies; 49+ messages in thread
From: Bryan Wu @ 2011-08-29 13:18 UTC (permalink / raw)
To: linux-arm-kernel
On Mon, Aug 29, 2011 at 7:00 PM, Linus Walleij <linus.walleij@linaro.org> wrote:
> On Fri, Aug 26, 2011 at 11:03 AM, Bryan Wu <bryan.wu@canonical.com> wrote:
>
>> Based on Linus Walleij's ARM LED consolidation work, this patchset introduce a
>> new generic led trigger for CPU not only for ARM but also for others.
>
> I think Russell was pretty clear that he saw problems inside the "new LEDs"
> subsystem (drivers/leds) that need be fixed before we migrate this support
> to use the LED class devices.
>
> Can you see if you can address his comment on the earlier realview patch,
> i.e. this:
> http://marc.info/?l=linux-arm-kernel&m=131237280009775&w=2
>
Yeah, I replied that email with a patch to select LEDS_CLASS when
CONFIG_NEW_LEDS=y.
But you know, there is no comments about that.
> rpurdie: your comments on the state of the LEDs class?
>
> If I get time I will attempt to fix it, no clue when that will be though.
>
Thanks a lot, I think our ledtrig-cpu patches are quite good for
merging, although Russell has some concern about leds subsystem.
Regards,
--
Bryan Wu <bryan.wu@canonical.com>
Kernel Developer ? ?+86.138-1617-6545 Mobile
Ubuntu Kernel Team
Canonical Ltd. ? ? ?www.canonical.com
Ubuntu - Linux for human beings | www.ubuntu.com
^ permalink raw reply [flat|nested] 49+ messages in thread
* Re: [PATCH v4 00/18] Introduce a led trigger for CPU activity and consolidate LED driver in ARM
2011-08-29 13:18 ` Bryan Wu
@ 2011-08-29 15:13 ` Russell King - ARM Linux
-1 siblings, 0 replies; 49+ messages in thread
From: Russell King - ARM Linux @ 2011-08-29 15:13 UTC (permalink / raw)
To: Bryan Wu
Cc: Linus Walleij, Richard Purdie, nicolas.pitre, arnd, tony, jochen,
linux-kernel, jamie, linux, linux-arm-kernel
On Mon, Aug 29, 2011 at 09:18:29PM +0800, Bryan Wu wrote:
> On Mon, Aug 29, 2011 at 7:00 PM, Linus Walleij <linus.walleij@linaro.org> wrote:
> > On Fri, Aug 26, 2011 at 11:03 AM, Bryan Wu <bryan.wu@canonical.com> wrote:
> >
> >> Based on Linus Walleij's ARM LED consolidation work, this patchset introduce a
> >> new generic led trigger for CPU not only for ARM but also for others.
> >
> > I think Russell was pretty clear that he saw problems inside the "new LEDs"
> > subsystem (drivers/leds) that need be fixed before we migrate this support
> > to use the LED class devices.
> >
> > Can you see if you can address his comment on the earlier realview patch,
> > i.e. this:
> > http://marc.info/?l=linux-arm-kernel&m=131237280009775&w=2
> >
>
> Yeah, I replied that email with a patch to select LEDS_CLASS when
> CONFIG_NEW_LEDS=y.
I don't see any point to that:
menuconfig NEW_LEDS
bool "LED Support"
select LEDS_CLASS
if NEW_LEDS
config LEDS_CLASS
bool "LED Class Support"
help
This option enables the led sysfs class in /sys/class/leds. You'll
need this to do anything useful with LEDs. If unsure, say N.
So, with that select there, you either have NEW_LEDS=y LEDS_CLASS=y
or NEW_LEDS=n LEDS_CLASS=n. To put it another way, you can't select
LEDS_CLASS when NEW_LEDS=n, and you can't deselect LEDS_CLASS when
NEW_LEDS=y.
So, either the LEDS_CLASS option is completely pointless, which means
it should be killed off, or LEDS_CLASS needs to be fixed so that it
actually does what it says in its help text and controls whether we
have a LEDS sysfs class _without_ affecting the ability to have
triggers setup by platform code.
What it can't do is stay as-is, because it's clearly broken and the
options help texts don't match reality.
^ permalink raw reply [flat|nested] 49+ messages in thread
* [PATCH v4 00/18] Introduce a led trigger for CPU activity and consolidate LED driver in ARM
@ 2011-08-29 15:13 ` Russell King - ARM Linux
0 siblings, 0 replies; 49+ messages in thread
From: Russell King - ARM Linux @ 2011-08-29 15:13 UTC (permalink / raw)
To: linux-arm-kernel
On Mon, Aug 29, 2011 at 09:18:29PM +0800, Bryan Wu wrote:
> On Mon, Aug 29, 2011 at 7:00 PM, Linus Walleij <linus.walleij@linaro.org> wrote:
> > On Fri, Aug 26, 2011 at 11:03 AM, Bryan Wu <bryan.wu@canonical.com> wrote:
> >
> >> Based on Linus Walleij's ARM LED consolidation work, this patchset introduce a
> >> new generic led trigger for CPU not only for ARM but also for others.
> >
> > I think Russell was pretty clear that he saw problems inside the "new LEDs"
> > subsystem (drivers/leds) that need be fixed before we migrate this support
> > to use the LED class devices.
> >
> > Can you see if you can address his comment on the earlier realview patch,
> > i.e. this:
> > http://marc.info/?l=linux-arm-kernel&m=131237280009775&w=2
> >
>
> Yeah, I replied that email with a patch to select LEDS_CLASS when
> CONFIG_NEW_LEDS=y.
I don't see any point to that:
menuconfig NEW_LEDS
bool "LED Support"
select LEDS_CLASS
if NEW_LEDS
config LEDS_CLASS
bool "LED Class Support"
help
This option enables the led sysfs class in /sys/class/leds. You'll
need this to do anything useful with LEDs. If unsure, say N.
So, with that select there, you either have NEW_LEDS=y LEDS_CLASS=y
or NEW_LEDS=n LEDS_CLASS=n. To put it another way, you can't select
LEDS_CLASS when NEW_LEDS=n, and you can't deselect LEDS_CLASS when
NEW_LEDS=y.
So, either the LEDS_CLASS option is completely pointless, which means
it should be killed off, or LEDS_CLASS needs to be fixed so that it
actually does what it says in its help text and controls whether we
have a LEDS sysfs class _without_ affecting the ability to have
triggers setup by platform code.
What it can't do is stay as-is, because it's clearly broken and the
options help texts don't match reality.
^ permalink raw reply [flat|nested] 49+ messages in thread
* Re: [PATCH v4 00/18] Introduce a led trigger for CPU activity and consolidate LED driver in ARM
2011-08-29 15:13 ` Russell King - ARM Linux
@ 2011-08-29 18:10 ` Bryan Wu
-1 siblings, 0 replies; 49+ messages in thread
From: Bryan Wu @ 2011-08-29 18:10 UTC (permalink / raw)
To: Russell King - ARM Linux
Cc: Linus Walleij, Richard Purdie, nicolas.pitre, arnd, tony, jochen,
linux-kernel, jamie, linux, linux-arm-kernel
On Mon, Aug 29, 2011 at 11:13 PM, Russell King - ARM Linux
<linux@arm.linux.org.uk> wrote:
> On Mon, Aug 29, 2011 at 09:18:29PM +0800, Bryan Wu wrote:
>> On Mon, Aug 29, 2011 at 7:00 PM, Linus Walleij <linus.walleij@linaro.org> wrote:
>> > On Fri, Aug 26, 2011 at 11:03 AM, Bryan Wu <bryan.wu@canonical.com> wrote:
>> >
>> >> Based on Linus Walleij's ARM LED consolidation work, this patchset introduce a
>> >> new generic led trigger for CPU not only for ARM but also for others.
>> >
>> > I think Russell was pretty clear that he saw problems inside the "new LEDs"
>> > subsystem (drivers/leds) that need be fixed before we migrate this support
>> > to use the LED class devices.
>> >
>> > Can you see if you can address his comment on the earlier realview patch,
>> > i.e. this:
>> > http://marc.info/?l=linux-arm-kernel&m=131237280009775&w=2
>> >
>>
>> Yeah, I replied that email with a patch to select LEDS_CLASS when
>> CONFIG_NEW_LEDS=y.
>
> I don't see any point to that:
>
Actually, what I really want to propose is to kill this option and
build in leds-class.c when CONFIG_NEW_LEDS=y, since most of functions
of leds-class.c are widely used by others.
And you know, to select it as default is a simple workaround.
Thanks,
-Bryan
^ permalink raw reply [flat|nested] 49+ messages in thread
* [PATCH v4 00/18] Introduce a led trigger for CPU activity and consolidate LED driver in ARM
@ 2011-08-29 18:10 ` Bryan Wu
0 siblings, 0 replies; 49+ messages in thread
From: Bryan Wu @ 2011-08-29 18:10 UTC (permalink / raw)
To: linux-arm-kernel
On Mon, Aug 29, 2011 at 11:13 PM, Russell King - ARM Linux
<linux@arm.linux.org.uk> wrote:
> On Mon, Aug 29, 2011 at 09:18:29PM +0800, Bryan Wu wrote:
>> On Mon, Aug 29, 2011 at 7:00 PM, Linus Walleij <linus.walleij@linaro.org> wrote:
>> > On Fri, Aug 26, 2011 at 11:03 AM, Bryan Wu <bryan.wu@canonical.com> wrote:
>> >
>> >> Based on Linus Walleij's ARM LED consolidation work, this patchset introduce a
>> >> new generic led trigger for CPU not only for ARM but also for others.
>> >
>> > I think Russell was pretty clear that he saw problems inside the "new LEDs"
>> > subsystem (drivers/leds) that need be fixed before we migrate this support
>> > to use the LED class devices.
>> >
>> > Can you see if you can address his comment on the earlier realview patch,
>> > i.e. this:
>> > http://marc.info/?l=linux-arm-kernel&m=131237280009775&w=2
>> >
>>
>> Yeah, I replied that email with a patch to select LEDS_CLASS when
>> CONFIG_NEW_LEDS=y.
>
> I don't see any point to that:
>
Actually, what I really want to propose is to kill this option and
build in leds-class.c when CONFIG_NEW_LEDS=y, since most of functions
of leds-class.c are widely used by others.
And you know, to select it as default is a simple workaround.
Thanks,
-Bryan
^ permalink raw reply [flat|nested] 49+ messages in thread
* Re: [PATCH v4 00/18] Introduce a led trigger for CPU activity and consolidate LED driver in ARM
2011-08-29 18:10 ` Bryan Wu
@ 2011-08-29 18:26 ` Nicolas Pitre
-1 siblings, 0 replies; 49+ messages in thread
From: Nicolas Pitre @ 2011-08-29 18:26 UTC (permalink / raw)
To: Bryan Wu
Cc: Russell King - ARM Linux, Linus Walleij, Richard Purdie, arnd,
tony, jochen, linux-kernel, jamie, linux, linux-arm-kernel
On Tue, 30 Aug 2011, Bryan Wu wrote:
> On Mon, Aug 29, 2011 at 11:13 PM, Russell King - ARM Linux
> <linux@arm.linux.org.uk> wrote:
> > On Mon, Aug 29, 2011 at 09:18:29PM +0800, Bryan Wu wrote:
> >> Yeah, I replied that email with a patch to select LEDS_CLASS when
> >> CONFIG_NEW_LEDS=y.
> >
> > I don't see any point to that:
> >
>
> Actually, what I really want to propose is to kill this option and
> build in leds-class.c when CONFIG_NEW_LEDS=y, since most of functions
> of leds-class.c are widely used by others.
>
> And you know, to select it as default is a simple workaround.
Please go ahead with complete solutions when they exist. We don't want
the mainline source tree filled with simple workarounds.
Nicolas
^ permalink raw reply [flat|nested] 49+ messages in thread
* [PATCH v4 00/18] Introduce a led trigger for CPU activity and consolidate LED driver in ARM
@ 2011-08-29 18:26 ` Nicolas Pitre
0 siblings, 0 replies; 49+ messages in thread
From: Nicolas Pitre @ 2011-08-29 18:26 UTC (permalink / raw)
To: linux-arm-kernel
On Tue, 30 Aug 2011, Bryan Wu wrote:
> On Mon, Aug 29, 2011 at 11:13 PM, Russell King - ARM Linux
> <linux@arm.linux.org.uk> wrote:
> > On Mon, Aug 29, 2011 at 09:18:29PM +0800, Bryan Wu wrote:
> >> Yeah, I replied that email with a patch to select LEDS_CLASS when
> >> CONFIG_NEW_LEDS=y.
> >
> > I don't see any point to that:
> >
>
> Actually, what I really want to propose is to kill this option and
> build in leds-class.c when CONFIG_NEW_LEDS=y, since most of functions
> of leds-class.c are widely used by others.
>
> And you know, to select it as default is a simple workaround.
Please go ahead with complete solutions when they exist. We don't want
the mainline source tree filled with simple workarounds.
Nicolas
^ permalink raw reply [flat|nested] 49+ messages in thread
* [PATCH 12/18] mach-footbridge: retire custom LED code
2011-08-10 12:05 [PATCH v3 " Bryan Wu
@ 2011-08-10 12:05 ` Bryan Wu
0 siblings, 0 replies; 49+ messages in thread
From: Bryan Wu @ 2011-08-10 12:05 UTC (permalink / raw)
To: linux-arm-kernel
Signed-off-by: Bryan Wu <bryan.wu@canonical.com>
---
| 4 -
| 139 ------------------------
| 79 ++++++++++++++
| 1 -
| 110 ++++++++++++++++---
| 139 ------------------------
6 files changed, 175 insertions(+), 297 deletions(-)
delete mode 100644 arch/arm/mach-footbridge/ebsa285-leds.c
delete mode 100644 arch/arm/mach-footbridge/netwinder-leds.c
--git a/arch/arm/mach-footbridge/Makefile b/arch/arm/mach-footbridge/Makefile
index 3afb1b2..0b64dd4 100644
--- a/arch/arm/mach-footbridge/Makefile
+++ b/arch/arm/mach-footbridge/Makefile
@@ -14,15 +14,11 @@ pci-$(CONFIG_ARCH_EBSA285_HOST) += ebsa285-pci.o
pci-$(CONFIG_ARCH_NETWINDER) += netwinder-pci.o
pci-$(CONFIG_ARCH_PERSONAL_SERVER) += personal-pci.o
-leds-$(CONFIG_ARCH_EBSA285) += ebsa285-leds.o
-leds-$(CONFIG_ARCH_NETWINDER) += netwinder-leds.o
-
obj-$(CONFIG_ARCH_CATS) += cats-hw.o isa-timer.o
obj-$(CONFIG_ARCH_EBSA285) += ebsa285.o dc21285-timer.o
obj-$(CONFIG_ARCH_NETWINDER) += netwinder-hw.o isa-timer.o
obj-$(CONFIG_ARCH_PERSONAL_SERVER) += personal.o dc21285-timer.o
obj-$(CONFIG_PCI) +=$(pci-y)
-obj-$(CONFIG_LEDS) +=$(leds-y)
obj-$(CONFIG_ISA) += isa.o isa-rtc.o
diff --git a/arch/arm/mach-footbridge/ebsa285-leds.c b/arch/arm/mach-footbridge/ebsa285-leds.c
deleted file mode 100644
index 4e10090..0000000
--- a/arch/arm/mach-footbridge/ebsa285-leds.c
+++ /dev/null
@@ -1,139 +0,0 @@
-/*
- * linux/arch/arm/mach-footbridge/ebsa285-leds.c
- *
- * Copyright (C) 1998-1999 Russell King
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- * EBSA-285 control routines.
- *
- * The EBSA-285 uses the leds as follows:
- * - Green - toggles state every 50 timer interrupts
- * - Amber - On if system is not idle
- * - Red - currently unused
- *
- * Changelog:
- * 02-05-1999 RMK Various cleanups
- */
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/spinlock.h>
-
-#include <mach/hardware.h>
-#include <asm/leds.h>
-#include <asm/mach-types.h>
-#include <asm/system.h>
-
-#define LED_STATE_ENABLED 1
-#define LED_STATE_CLAIMED 2
-static char led_state;
-static char hw_led_state;
-
-static DEFINE_SPINLOCK(leds_lock);
-
-static void ebsa285_leds_event(led_event_t evt)
-{
- unsigned long flags;
-
- spin_lock_irqsave(&leds_lock, flags);
-
- switch (evt) {
- case led_start:
- hw_led_state = XBUS_LED_RED | XBUS_LED_GREEN;
-#ifndef CONFIG_LEDS_CPU
- hw_led_state |= XBUS_LED_AMBER;
-#endif
- led_state |= LED_STATE_ENABLED;
- break;
-
- case led_stop:
- led_state &= ~LED_STATE_ENABLED;
- break;
-
- case led_claim:
- led_state |= LED_STATE_CLAIMED;
- hw_led_state = XBUS_LED_RED | XBUS_LED_GREEN | XBUS_LED_AMBER;
- break;
-
- case led_release:
- led_state &= ~LED_STATE_CLAIMED;
- hw_led_state = XBUS_LED_RED | XBUS_LED_GREEN | XBUS_LED_AMBER;
- break;
-
-#ifdef CONFIG_LEDS_TIMER
- case led_timer:
- if (!(led_state & LED_STATE_CLAIMED))
- hw_led_state ^= XBUS_LED_GREEN;
- break;
-#endif
-
-#ifdef CONFIG_LEDS_CPU
- case led_idle_start:
- if (!(led_state & LED_STATE_CLAIMED))
- hw_led_state |= XBUS_LED_AMBER;
- break;
-
- case led_idle_end:
- if (!(led_state & LED_STATE_CLAIMED))
- hw_led_state &= ~XBUS_LED_AMBER;
- break;
-#endif
-
- case led_halted:
- if (!(led_state & LED_STATE_CLAIMED))
- hw_led_state &= ~XBUS_LED_RED;
- break;
-
- case led_green_on:
- if (led_state & LED_STATE_CLAIMED)
- hw_led_state &= ~XBUS_LED_GREEN;
- break;
-
- case led_green_off:
- if (led_state & LED_STATE_CLAIMED)
- hw_led_state |= XBUS_LED_GREEN;
- break;
-
- case led_amber_on:
- if (led_state & LED_STATE_CLAIMED)
- hw_led_state &= ~XBUS_LED_AMBER;
- break;
-
- case led_amber_off:
- if (led_state & LED_STATE_CLAIMED)
- hw_led_state |= XBUS_LED_AMBER;
- break;
-
- case led_red_on:
- if (led_state & LED_STATE_CLAIMED)
- hw_led_state &= ~XBUS_LED_RED;
- break;
-
- case led_red_off:
- if (led_state & LED_STATE_CLAIMED)
- hw_led_state |= XBUS_LED_RED;
- break;
-
- default:
- break;
- }
-
- if (led_state & LED_STATE_ENABLED)
- *XBUS_LEDS = hw_led_state;
-
- spin_unlock_irqrestore(&leds_lock, flags);
-}
-
-static int __init leds_init(void)
-{
- if (machine_is_ebsa285())
- leds_event = ebsa285_leds_event;
-
- leds_event(led_start);
-
- return 0;
-}
-
-__initcall(leds_init);
--git a/arch/arm/mach-footbridge/ebsa285.c b/arch/arm/mach-footbridge/ebsa285.c
index 2ef69ff..465a738 100644
--- a/arch/arm/mach-footbridge/ebsa285.c
+++ b/arch/arm/mach-footbridge/ebsa285.c
@@ -5,6 +5,8 @@
*/
#include <linux/init.h>
#include <linux/spinlock.h>
+#include <linux/slab.h>
+#include <linux/leds.h>
#include <asm/hardware/dec21285.h>
#include <asm/mach-types.h>
@@ -13,6 +15,83 @@
#include "common.h"
+/* LEDs */
+struct ebsa285_led {
+ struct led_classdev cdev;
+ u8 mask;
+};
+
+/*
+ * The triggers lines up below will only be used if the
+ * LED triggers are compiled in.
+ */
+static const struct {
+ const char *name;
+ const char *trigger;
+} ebsa285_leds[] = {
+ { "ebsa285:amber", "heartbeat", },
+ { "ebsa285:green", "cpu0", },
+ { "ebsa285:red",},
+};
+
+static void ebsa285_led_set(struct led_classdev *cdev,
+ enum led_brightness b)
+{
+ struct ebsa285_led *led = container_of(cdev,
+ struct ebsa285_led, cdev);
+
+ if (b != LED_OFF)
+ *XBUS_LEDS |= led->mask;
+ else
+ *XBUS_LEDS &= ~led->mask;
+}
+
+static enum led_brightness ebsa285_led_get(struct led_classdev *cdev)
+{
+ struct ebsa285_led *led = container_of(cdev,
+ struct ebsa285_led, cdev);
+
+ return (*XBUS_LEDS & led->mask) ? LED_FULL : LED_OFF;
+}
+
+static int __init ebsa285_leds_init(void)
+{
+ int i;
+
+ if (machine_is_ebsa285())
+ return -ENODEV;
+
+ /* 3 LEDS All ON */
+ *XBUS_LEDS |= XBUS_LED_AMBER | XBUS_LED_GREEN | XBUS_LED_RED;
+
+ for (i = 0; i < ARRAY_SIZE(ebsa285_leds); i++) {
+ struct ebsa285_led *led;
+
+ led = kzalloc(sizeof(*led), GFP_KERNEL);
+ if (!led)
+ break;
+
+ led->cdev.name = ebsa285_leds[i].name;
+ led->cdev.brightness_set = ebsa285_led_set;
+ led->cdev.brightness_get = ebsa285_led_get;
+ led->cdev.default_trigger = ebsa285_leds[i].trigger;
+ led->mask = BIT(i);
+
+ if (led_classdev_register(NULL, &led->cdev) < 0) {
+ kfree(led);
+ break;
+ }
+ }
+
+ return 0;
+}
+
+/*
+ * Since we may have triggers on any subsystem, defer registration
+ * until after subsystem_init.
+ */
+fs_initcall(ebsa285_leds_init);
+
MACHINE_START(EBSA285, "EBSA285")
/* Maintainer: Russell King */
.boot_params = 0x00000100,
--git a/arch/arm/mach-footbridge/include/mach/system.h b/arch/arm/mach-footbridge/include/mach/system.h
index 0b29315..c026efa 100644
--- a/arch/arm/mach-footbridge/include/mach/system.h
+++ b/arch/arm/mach-footbridge/include/mach/system.h
@@ -10,7 +10,6 @@
#include <linux/io.h>
#include <asm/hardware/dec21285.h>
#include <mach/hardware.h>
-#include <asm/leds.h>
#include <asm/mach-types.h>
static inline void arch_idle(void)
--git a/arch/arm/mach-footbridge/netwinder-hw.c b/arch/arm/mach-footbridge/netwinder-hw.c
index 06e514f..e5450fe 100644
--- a/arch/arm/mach-footbridge/netwinder-hw.c
+++ b/arch/arm/mach-footbridge/netwinder-hw.c
@@ -12,9 +12,10 @@
#include <linux/init.h>
#include <linux/io.h>
#include <linux/spinlock.h>
+#include <linux/slab.h>
+#include <linux/leds.h>
#include <asm/hardware/dec21285.h>
-#include <asm/leds.h>
#include <asm/mach-types.h>
#include <asm/setup.h>
@@ -26,13 +27,6 @@
#define GP1_IO_BASE 0x338
#define GP2_IO_BASE 0x33a
-
-#ifdef CONFIG_LEDS
-#define DEFAULT_LEDS 0
-#else
-#define DEFAULT_LEDS GPIO_GREEN_LED
-#endif
-
/*
* Winbond WB83977F accessibility stuff
*/
@@ -610,15 +604,9 @@ static void __init rwa010_init(void)
static int __init nw_hw_init(void)
{
if (machine_is_netwinder()) {
- unsigned long flags;
-
wb977_init();
cpld_init();
rwa010_init();
-
- spin_lock_irqsave(&nw_gpio_lock, flags);
- nw_gpio_modify_op(GPIO_RED_LED|GPIO_GREEN_LED, DEFAULT_LEDS);
- spin_unlock_irqrestore(&nw_gpio_lock, flags);
}
return 0;
}
@@ -646,6 +634,100 @@ fixup_netwinder(struct machine_desc *desc, struct tag *tags,
#endif
}
+/* LEDs */
+struct netwinder_led {
+ struct led_classdev cdev;
+ u8 mask;
+};
+
+/*
+ * The triggers lines up below will only be used if the
+ * LED triggers are compiled in.
+ */
+static const struct {
+ const char *name;
+ const char *trigger;
+} netwinder_leds[] = {
+ { "netwinder:green", "heartbeat", },
+ { "netwinder:red", "cpu0", },
+};
+
+/*
+ * The LED control in Netwinder is reversed:
+ * - setting bit means turn off LED
+ * - clearing bit means turn on LED
+ */
+static void netwinder_led_set(struct led_classdev *cdev,
+ enum led_brightness b)
+{
+ struct netwinder_led *led = container_of(cdev,
+ struct netwinder_led, cdev);
+ unsigned long flags;
+ u32 reg;
+
+ spin_lock_irqsave(&nw_gpio_lock, flags);
+ reg = nw_gpio_read();
+ if (b != LED_OFF)
+ reg &= ~led->mask;
+ else
+ reg |= led->mask;
+ nw_gpio_modify_op(led->mask, reg);
+ spin_unlock_irqrestore(&nw_gpio_lock, flags);
+}
+
+static enum led_brightness netwinder_led_get(struct led_classdev *cdev)
+{
+ struct netwinder_led *led = container_of(cdev,
+ struct netwinder_led, cdev);
+ unsigned long flags;
+ u32 reg;
+
+ spin_lock_irqsave(&nw_gpio_lock, flags);
+ reg = nw_gpio_read();
+ spin_unlock_irqrestore(&nw_gpio_lock, flags);
+
+ return (reg & led->mask) ? LED_OFF : LED_FULL;
+}
+
+static int __init netwinder_leds_init(void)
+{
+ int i;
+
+ if (!machine_is_netwinder())
+ return -ENODEV;
+
+ for (i = 0; i < ARRAY_SIZE(netwinder_leds); i++) {
+ struct netwinder_led *led;
+
+ led = kzalloc(sizeof(*led), GFP_KERNEL);
+ if (!led)
+ break;
+
+ led->cdev.name = netwinder_leds[i].name;
+ led->cdev.brightness_set = netwinder_led_set;
+ led->cdev.brightness_get = netwinder_led_get;
+ led->cdev.default_trigger = netwinder_leds[i].trigger;
+
+ if (i == 0)
+ led->mask = GPIO_GREEN_LED;
+ else
+ led->mask = GPIO_RED_LED;
+
+ if (led_classdev_register(NULL, &led->cdev) < 0) {
+ kfree(led);
+ break;
+ }
+ }
+
+ return 0;
+}
+
+/*
+ * Since we may have triggers on any subsystem, defer registration
+ * until after subsystem_init.
+ */
+fs_initcall(netwinder_leds_init);
+
MACHINE_START(NETWINDER, "Rebel-NetWinder")
/* Maintainer: Russell King/Rebel.com */
.boot_params = 0x00000100,
diff --git a/arch/arm/mach-footbridge/netwinder-leds.c b/arch/arm/mach-footbridge/netwinder-leds.c
deleted file mode 100644
index 00269fe..0000000
--- a/arch/arm/mach-footbridge/netwinder-leds.c
+++ /dev/null
@@ -1,139 +0,0 @@
-/*
- * linux/arch/arm/mach-footbridge/netwinder-leds.c
- *
- * Copyright (C) 1998-1999 Russell King
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * NetWinder LED control routines.
- *
- * The Netwinder uses the leds as follows:
- * - Green - toggles state every 50 timer interrupts
- * - Red - On if the system is not idle
- *
- * Changelog:
- * 02-05-1999 RMK Various cleanups
- */
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/spinlock.h>
-
-#include <mach/hardware.h>
-#include <asm/leds.h>
-#include <asm/mach-types.h>
-#include <asm/system.h>
-
-#define LED_STATE_ENABLED 1
-#define LED_STATE_CLAIMED 2
-static char led_state;
-static char hw_led_state;
-
-static DEFINE_SPINLOCK(leds_lock);
-
-static void netwinder_leds_event(led_event_t evt)
-{
- unsigned long flags;
-
- spin_lock_irqsave(&leds_lock, flags);
-
- switch (evt) {
- case led_start:
- led_state |= LED_STATE_ENABLED;
- hw_led_state = GPIO_GREEN_LED;
- break;
-
- case led_stop:
- led_state &= ~LED_STATE_ENABLED;
- break;
-
- case led_claim:
- led_state |= LED_STATE_CLAIMED;
- hw_led_state = 0;
- break;
-
- case led_release:
- led_state &= ~LED_STATE_CLAIMED;
- hw_led_state = 0;
- break;
-
-#ifdef CONFIG_LEDS_TIMER
- case led_timer:
- if (!(led_state & LED_STATE_CLAIMED))
- hw_led_state ^= GPIO_GREEN_LED;
- break;
-#endif
-
-#ifdef CONFIG_LEDS_CPU
- case led_idle_start:
- if (!(led_state & LED_STATE_CLAIMED))
- hw_led_state &= ~GPIO_RED_LED;
- break;
-
- case led_idle_end:
- if (!(led_state & LED_STATE_CLAIMED))
- hw_led_state |= GPIO_RED_LED;
- break;
-#endif
-
- case led_halted:
- if (!(led_state & LED_STATE_CLAIMED))
- hw_led_state |= GPIO_RED_LED;
- break;
-
- case led_green_on:
- if (led_state & LED_STATE_CLAIMED)
- hw_led_state |= GPIO_GREEN_LED;
- break;
-
- case led_green_off:
- if (led_state & LED_STATE_CLAIMED)
- hw_led_state &= ~GPIO_GREEN_LED;
- break;
-
- case led_amber_on:
- if (led_state & LED_STATE_CLAIMED)
- hw_led_state |= GPIO_GREEN_LED | GPIO_RED_LED;
- break;
-
- case led_amber_off:
- if (led_state & LED_STATE_CLAIMED)
- hw_led_state &= ~(GPIO_GREEN_LED | GPIO_RED_LED);
- break;
-
- case led_red_on:
- if (led_state & LED_STATE_CLAIMED)
- hw_led_state |= GPIO_RED_LED;
- break;
-
- case led_red_off:
- if (led_state & LED_STATE_CLAIMED)
- hw_led_state &= ~GPIO_RED_LED;
- break;
-
- default:
- break;
- }
-
- spin_unlock_irqrestore(&leds_lock, flags);
-
- if (led_state & LED_STATE_ENABLED) {
- spin_lock_irqsave(&nw_gpio_lock, flags);
- nw_gpio_modify_op(GPIO_RED_LED | GPIO_GREEN_LED, hw_led_state);
- spin_unlock_irqrestore(&nw_gpio_lock, flags);
- }
-}
-
-static int __init leds_init(void)
-{
- if (machine_is_netwinder())
- leds_event = netwinder_leds_event;
-
- leds_event(led_start);
-
- return 0;
-}
-
-__initcall(leds_init);
--
1.7.5
^ permalink raw reply related [flat|nested] 49+ messages in thread
end of thread, other threads:[~2011-08-29 18:27 UTC | newest]
Thread overview: 49+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2011-08-26 9:03 [PATCH v4 00/18] Introduce a led trigger for CPU activity and consolidate LED driver in ARM Bryan Wu
2011-08-26 9:03 ` Bryan Wu
2011-08-26 9:03 ` [PATCH 01/18] led-triggers: use atomic kzalloc during led trigger registering Bryan Wu
2011-08-26 9:03 ` Bryan Wu
2011-08-26 9:03 ` [PATCH 02/18] led-triggers: create a trigger for CPU activity Bryan Wu
2011-08-26 9:03 ` Bryan Wu
2011-08-26 9:03 ` [PATCH 03/18] arm: at91: convert old leds drivers to gpio_led and led_trigger drivers Bryan Wu
2011-08-26 9:03 ` Bryan Wu
2011-08-26 9:03 ` [PATCH 04/18] mach-realview and mach-versatile: retire custom LED code Bryan Wu
2011-08-26 9:03 ` Bryan Wu
2011-08-26 9:03 ` [PATCH 05/18] mach-ks8695: remove leds driver, since nobody use it Bryan Wu
2011-08-26 9:03 ` Bryan Wu
2011-08-26 9:03 ` [PATCH 06/18] mach-shark: retire custom LED code Bryan Wu
2011-08-26 9:03 ` Bryan Wu
2011-08-26 9:03 ` [PATCH 07/18] mach-orion5x: convert custom LED code to gpio_led and LED CPU trigger Bryan Wu
2011-08-26 9:03 ` Bryan Wu
2011-08-26 9:03 ` [PATCH 08/18] mach-integrator: move CM_CTRL to header file for accessing by other functions Bryan Wu
2011-08-26 9:03 ` Bryan Wu
2011-08-26 9:03 ` [PATCH 09/18] mach-integrator: retire custom LED code Bryan Wu
2011-08-26 9:03 ` Bryan Wu
2011-08-26 9:03 ` [PATCH 10/18] mach-clps711x: retire custom LED code of P720T machine Bryan Wu
2011-08-26 9:03 ` Bryan Wu
2011-08-26 9:03 ` [PATCH 11/18] mach-ebsa110: retire custom LED code Bryan Wu
2011-08-26 9:03 ` Bryan Wu
2011-08-26 9:03 ` [PATCH 12/18] mach-footbridge: " Bryan Wu
2011-08-26 9:03 ` Bryan Wu
2011-08-26 9:03 ` [PATCH 13/18] mach-pxa: " Bryan Wu
2011-08-26 9:03 ` Bryan Wu
2011-08-26 9:03 ` [PATCH 14/18] plat-samsung: remove including old leds event API header file Bryan Wu
2011-08-26 9:03 ` Bryan Wu
2011-08-26 9:03 ` [PATCH 15/18] mach-pnx4008: " Bryan Wu
2011-08-26 9:03 ` Bryan Wu
2011-08-26 9:03 ` [PATCH 16/18] mach-omap1: retire custom LED code Bryan Wu
2011-08-26 9:03 ` Bryan Wu
2011-08-26 9:03 ` [PATCH 17/18] mach-sa1100: " Bryan Wu
2011-08-26 9:03 ` Bryan Wu
2011-08-26 9:03 ` [PATCH 18/18] ARM: use new LEDS CPU trigger stub to replace old one Bryan Wu
2011-08-26 9:03 ` Bryan Wu
2011-08-29 11:00 ` [PATCH v4 00/18] Introduce a led trigger for CPU activity and consolidate LED driver in ARM Linus Walleij
2011-08-29 11:00 ` Linus Walleij
2011-08-29 13:18 ` Bryan Wu
2011-08-29 13:18 ` Bryan Wu
2011-08-29 15:13 ` Russell King - ARM Linux
2011-08-29 15:13 ` Russell King - ARM Linux
2011-08-29 18:10 ` Bryan Wu
2011-08-29 18:10 ` Bryan Wu
2011-08-29 18:26 ` Nicolas Pitre
2011-08-29 18:26 ` Nicolas Pitre
-- strict thread matches above, loose matches on Subject: below --
2011-08-10 12:05 [PATCH v3 " Bryan Wu
2011-08-10 12:05 ` [PATCH 12/18] mach-footbridge: retire custom LED code Bryan Wu
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.