From mboxrd@z Thu Jan 1 00:00:00 1970 From: Wolfgang Denk Date: Fri, 26 Aug 2011 14:25:47 +0200 Subject: [U-Boot] [PATCH v2 15/16] ARM: remove broken "m501sk" board In-Reply-To: <1314361548-18566-1-git-send-email-wd@denx.de> References: <4E564825.8080608@aribaud.net> <1314361548-18566-1-git-send-email-wd@denx.de> Message-ID: <1314361548-18566-16-git-send-email-wd@denx.de> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de Signed-off-by: Wolfgang Denk --- board/m501sk/Makefile | 50 ---------- board/m501sk/config.mk | 1 - board/m501sk/eeprom.c | 102 --------------------- board/m501sk/m501sk.c | 203 ----------------------------------------- board/m501sk/m501sk.h | 167 --------------------------------- boards.cfg | 1 - doc/README.scrapyard | 1 + include/configs/m501sk.h | 228 ---------------------------------------------- 8 files changed, 1 insertions(+), 752 deletions(-) delete mode 100644 board/m501sk/Makefile delete mode 100644 board/m501sk/config.mk delete mode 100644 board/m501sk/eeprom.c delete mode 100644 board/m501sk/m501sk.c delete mode 100644 board/m501sk/m501sk.h delete mode 100644 include/configs/m501sk.h diff --git a/board/m501sk/Makefile b/board/m501sk/Makefile deleted file mode 100644 index 439e99f..0000000 --- a/board/m501sk/Makefile +++ /dev/null @@ -1,50 +0,0 @@ -# -# (C) Copyright 2003 -# Wolfgang Denk, DENX Software Engineering, wd at denx.de. -# -# See file CREDITS for list of people who contributed to this -# project. -# -# This program is free software; you can redistribute it and/or -# modify it under the terms of the GNU General Public License as -# published by the Free Software Foundation; either version 2 of -# the License, or (at your option) any later version. -# -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -# GNU General Public License for more details. -# -# You should have received a copy of the GNU General Public License -# along with this program; if not, write to the Free Software -# Foundation, Inc., 59 Temple Place, Suite 330, Boston, -# MA 02111-1307 USA -# - -include $(TOPDIR)/config.mk - -LIB = $(obj)lib$(BOARD).o - -COBJS := m501sk.o eeprom.o - -SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) -OBJS := $(addprefix $(obj),$(COBJS)) -SOBJS := $(addprefix $(obj),$(SOBJS)) - -$(LIB): $(OBJS) $(SOBJS) - $(call cmd_link_o_target, $(OBJS) $(SOBJS)) - -clean: - rm -f $(SOBJS) $(OBJS) - -distclean: clean - rm -f $(LIB) core *.bak $(obj).depend - -######################################################################### - -# defines $(obj).depend target -include $(SRCTREE)/rules.mk - -sinclude $(obj).depend - -######################################################################### diff --git a/board/m501sk/config.mk b/board/m501sk/config.mk deleted file mode 100644 index 2077692..0000000 --- a/board/m501sk/config.mk +++ /dev/null @@ -1 +0,0 @@ -CONFIG_SYS_TEXT_BASE = 0x21f00000 diff --git a/board/m501sk/eeprom.c b/board/m501sk/eeprom.c deleted file mode 100644 index d1a46f3..0000000 --- a/board/m501sk/eeprom.c +++ /dev/null @@ -1,102 +0,0 @@ -/* - * Add by Alan Lu, 07-29-2005 - * For ATMEL AT24C16 EEPROM - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -#include -#include -#ifdef CONFIG_SYS_EEPROM_AT24C16 -#undef DEBUG - -void eeprom_init(void) -{ -#if defined(CONFIG_HARD_I2C) || defined(CONFIG_SOFT_I2C) - i2c_init(CONFIG_SYS_I2C_SPEED, CONFIG_SYS_I2C_SLAVE); -#endif -} - -int eeprom_read(unsigned dev_addr, unsigned offset, uchar *buffer, - unsigned cnt) -{ - int page, count = 0, i = 0; - page = offset / 0x100; - i = offset % 0x100; - - while (count < cnt) { - if (i2c_read(dev_addr|page, i++, 1, buffer+count++, 1) != 0) - return 1; - if (i > 0xff) { - page++; - i = 0; - } - } - - return 0; -} - -/* - * for CONFIG_SYS_I2C_EEPROM_ADDR_LEN == 2 (16-bit EEPROM address) offset is - * 0x000nxxxx for EEPROM address selectors at n, offset xxxx in EEPROM. - * - * for CONFIG_SYS_I2C_EEPROM_ADDR_LEN == 1 (8-bit EEPROM page address) offset is - * 0x00000nxx for EEPROM address selectors and page number at n. - */ -int eeprom_write(unsigned dev_addr, unsigned offset, uchar *buffer, - unsigned cnt) -{ - int page, i = 0, count = 0; - - page = offset / 0x100; - i = offset % 0x100; - - while (count < cnt) { - if (i2c_write(dev_addr|page, i++, 1, buffer+count++, 1) != 0) - return 1; - if (i > 0xff) { - page++; - i = 0; - } - } - -#if defined(CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS) - udelay(CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS * 1000); -#endif - - return 0; -} - -#ifndef CONFIG_SPI -int eeprom_probe(unsigned dev_addr, unsigned offset) -{ - unsigned char chip; - - /* Probe the chip address */ -#if CONFIG_SYS_I2C_EEPROM_ADDR_LEN == 1 && !defined(CONFIG_SPI_X) - chip = offset >> 8; /* block number */ -#else - chip = offset >> 16; /* block number */ -#endif /* CONFIG_SYS_I2C_EEPROM_ADDR_LEN, CONFIG_SPI_X */ - - chip |= dev_addr; /* insert device address */ - return (i2c_probe(chip)); -} -#endif -#endif diff --git a/board/m501sk/m501sk.c b/board/m501sk/m501sk.c deleted file mode 100644 index c995768..0000000 --- a/board/m501sk/m501sk.c +++ /dev/null @@ -1,203 +0,0 @@ -/* - * (C) Copyright 2008 - * Based on modifications by Alan Lu / Artila - * Author : Timo Tuunainen / Sysart - Kimmo Leppala / Sysart - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -#include -#include -#include -#if defined(CONFIG_DRIVER_ETHER) -#include -#include -#endif - -#include "m501sk.h" -#include "net.h" - -#ifdef CONFIG_M501SK - -void m501sk_gpio_init(void) -{ - AT91C_BASE_PIOD->PIO_PER = 1 << (M501SK_DEBUG_LED1 - 96) | - 1 << (M501SK_DEBUG_LED2 - 96) | 1 << (M501SK_DEBUG_LED3 - 96) | - 1 << (M501SK_DEBUG_LED4 - 96) | 1 << (M501SK_READY_LED - 96); - - AT91C_BASE_PIOD->PIO_OER = 1 << (M501SK_DEBUG_LED1 - 96) | - 1 << (M501SK_DEBUG_LED2 - 96) | 1 << (M501SK_DEBUG_LED3 - 96) | - 1 << (M501SK_DEBUG_LED4 - 96) | 1 << (M501SK_READY_LED - 96); - - AT91C_BASE_PIOD->PIO_SODR = 1 << (M501SK_READY_LED - 96); - AT91C_BASE_PIOD->PIO_CODR = 1 << (M501SK_DEBUG_LED3 - 96); - AT91C_BASE_PIOB->PIO_PER = 1 << (M501SK_BUZZER - 32); - AT91C_BASE_PIOB->PIO_OER = 1 << (M501SK_BUZZER - 32); - AT91C_BASE_PIOC->PIO_PDR = (1 << 7) | (1 << 8); - - /* Power OFF all USART's LEDs */ - AT91C_BASE_PIOA->PIO_PER = AT91C_PA5_TXD3 | AT91C_PA6_RXD3 | - AT91C_PA17_TXD0 | AT91C_PA18_RXD0 | AT91C_PA22_RXD2 | \ - AT91C_PA23_TXD2; - - AT91C_BASE_PIOA->PIO_OER = AT91C_PA5_TXD3 | AT91C_PA6_RXD3 | - AT91C_PA17_TXD0 | AT91C_PA18_RXD0 | AT91C_PA22_RXD2 | \ - AT91C_PA23_TXD2; - - AT91C_BASE_PIOA->PIO_SODR = AT91C_PA5_TXD3 | AT91C_PA6_RXD3 | - AT91C_PA17_TXD0 | AT91C_PA18_RXD0 | AT91C_PA22_RXD2 | \ - AT91C_PA23_TXD2; - - AT91C_BASE_PIOB->PIO_PER = AT91C_PB20_RXD1 | AT91C_PB21_TXD1; - AT91C_BASE_PIOB->PIO_OER = AT91C_PB20_RXD1 | AT91C_PB21_TXD1; - AT91C_BASE_PIOB->PIO_SODR = AT91C_PB20_RXD1 | AT91C_PB21_TXD1; -} - -uchar m501sk_gpio_set(M501SK_PIO io) -{ - uchar status = 0xff; - switch (io) { - case M501SK_DEBUG_LED1: - case M501SK_DEBUG_LED2: - case M501SK_DEBUG_LED3: - case M501SK_DEBUG_LED4: - case M501SK_READY_LED: - AT91C_BASE_PIOD->PIO_SODR = 1 << (io - 96); - status = AT91C_BASE_PIOD->PIO_ODSR & (1 << (io - 96)); - break; - case M501SK_BUZZER: - AT91C_BASE_PIOB->PIO_SODR = 1 << (io - 32); - status = AT91C_BASE_PIOB->PIO_ODSR & (1 << (io - 32)); - break; - } - return status; -} - -uchar m501sk_gpio_clear(M501SK_PIO io) -{ - uchar status = 0xff; - switch (io) { - case M501SK_DEBUG_LED1: - case M501SK_DEBUG_LED2: - case M501SK_DEBUG_LED3: - case M501SK_DEBUG_LED4: - case M501SK_READY_LED: - AT91C_BASE_PIOD->PIO_CODR = 1 << (io - 96); - status = AT91C_BASE_PIOD->PIO_ODSR & (1 << (io - 96)); - break; - case M501SK_BUZZER: - AT91C_BASE_PIOB->PIO_CODR = 1 << (io - 32); - status = AT91C_BASE_PIOB->PIO_ODSR & (1 << (io - 32)); - break; - } - return status; -} - -/* - * Miscelaneous platform dependent initialisations - */ -DECLARE_GLOBAL_DATA_PTR; - -int board_init(void) -{ - /* Enable Ctrlc */ - console_init_f(); - - /* Correct IRDA resistor problem */ - /* Set PA23_TXD in Output */ - ((AT91PS_PIO)AT91C_BASE_PIOA)->PIO_OER = AT91C_PA23_TXD2; - - /* memory and cpu-speed are setup before relocation */ - /* so we do _nothing_ here */ - gd->bd->bi_arch_number = MACH_TYPE_M501; - /* adress of boot parameters */ - gd->bd->bi_boot_params = PHYS_SDRAM + 0x100; - m501sk_gpio_init(); - - /* Do interrupt init here, because flash needs timers */ - timer_init(); - flash_init(); - - return 0; -} - -int dram_init(void) -{ - int i = 0; - gd->bd->bi_dram[0].start = PHYS_SDRAM; - gd->bd->bi_dram[0].size = PHYS_SDRAM_SIZE; - - for (i = 0; i < 500; i++) { - m501sk_gpio_clear(M501SK_DEBUG_LED3); - m501sk_gpio_clear(M501SK_BUZZER); - udelay(250); - m501sk_gpio_set(M501SK_DEBUG_LED3); - m501sk_gpio_set(M501SK_BUZZER); - udelay(80); - } - m501sk_gpio_clear(M501SK_BUZZER); - m501sk_gpio_clear(M501SK_DEBUG_LED3); - - return 0; -} - -int board_late_init(void) -{ -#if defined(CONFIG_CMD_NET) - eth_init(gd->bd); - eth_halt(); -#endif - - /* Protect U-Boot, kernel & ramdisk memory addresses */ - run_command("protect on 10000000 1041ffff", 0); - return 0; -} - -#ifdef CONFIG_DRIVER_ETHER -#if defined(CONFIG_CMD_NET) -/* - * Name: - * at91rm9200_GetPhyInterface - * Description: - * Initialise the interface functions to the PHY - * Arguments: - * None - * Return value: - * None - */ -void at91rm9200_GetPhyInterface(AT91PS_PhyOps p_phyops) -{ - p_phyops->Init = dm9161_InitPhy; - p_phyops->IsPhyConnected = dm9161_IsPhyConnected; - p_phyops->GetLinkSpeed = dm9161_GetLinkSpeed; - p_phyops->AutoNegotiate = dm9161_AutoNegotiate; -} -#endif /* CONFIG_CMD_NET */ -#endif /* CONFIG_DRIVER_ETHER */ - -#ifdef CONFIG_DRIVER_AT91EMAC -int board_eth_init(bd_t *bis) -{ - int rc = 0; - rc = at91emac_register(bis, 0); - return rc; -} -#endif -#endif /* CONFIG_M501SK */ diff --git a/board/m501sk/m501sk.h b/board/m501sk/m501sk.h deleted file mode 100644 index 51d10f5..0000000 --- a/board/m501sk/m501sk.h +++ /dev/null @@ -1,167 +0,0 @@ -/* - * linux/include/asm/arch-at91/hardware.h - * - * Copyright (C) 2003 SAN People - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ -#ifndef __M501SK_H -#define __M501SK_H - -#ifndef __ASSEMBLY__ -#include -#else -#include -#endif - -#define AT91C_PIO_PA22 ((unsigned int) 1 << 22) /* Pin Controlled by PA22 */ -#define AT91C_PA22_RXD2 ((unsigned int) AT91C_PIO_PA22) /* USART 2 RxD */ -#define AT91C_PA5_TXD3 ((unsigned int) 1 << 5) /* USART 3 TxD */ -#define AT91C_PA6_RXD3 ((unsigned int) 1 << 6) /* USART 3 RxD */ - -/* ========== Register definition for PIOD peripheral ========== */ -#define AT91C_PIOD_PDSR ((AT91_REG *) 0xFFFFFA3C) /* Pin Data stat Reg */ -#define AT91C_PIOD_CODR ((AT91_REG *) 0xFFFFFA34) /* Clear Output Data Reg */ -#define AT91C_PIOD_OWER ((AT91_REG *) 0xFFFFFAA0) /* Output Write Enable Reg */ -#define AT91C_PIOD_MDER ((AT91_REG *) 0xFFFFFA50) /* Multi-driver Enable Reg */ -#define AT91C_PIOD_IMR ((AT91_REG *) 0xFFFFFA48) /* Interrupt Mask Reg */ -#define AT91C_PIOD_IER ((AT91_REG *) 0xFFFFFA40) /* Interrupt Enable Reg */ -#define AT91C_PIOD_ODSR ((AT91_REG *) 0xFFFFFA38) /* Output Data stat Reg */ -#define AT91C_PIOD_SODR ((AT91_REG *) 0xFFFFFA30) /* Set Output Data Reg */ -#define AT91C_PIOD_PER ((AT91_REG *) 0xFFFFFA00) /* PIO Enable Reg */ -#define AT91C_PIOD_OWDR ((AT91_REG *) 0xFFFFFAA4) /* Output Write Disable Reg */ -#define AT91C_PIOD_PPUER ((AT91_REG *) 0xFFFFFA64) /* Pull-up Enable Reg */ -#define AT91C_PIOD_MDDR ((AT91_REG *) 0xFFFFFA54) /* Multi-driver Disable Reg */ -#define AT91C_PIOD_ISR ((AT91_REG *) 0xFFFFFA4C) /* Interrupt stat Reg */ -#define AT91C_PIOD_IDR ((AT91_REG *) 0xFFFFFA44) /* Interrupt Disable Reg */ -#define AT91C_PIOD_PDR ((AT91_REG *) 0xFFFFFA04) /* PIO Disable Reg */ -#define AT91C_PIOD_ODR ((AT91_REG *) 0xFFFFFA14) /* Output Disable Regr */ -#define AT91C_PIOD_OWSR ((AT91_REG *) 0xFFFFFAA8) /* Output Write stat Reg */ -#define AT91C_PIOD_ABSR ((AT91_REG *) 0xFFFFFA78) /* AB Select stat Reg */ -#define AT91C_PIOD_ASR ((AT91_REG *) 0xFFFFFA70) /* Select A Reg */ -#define AT91C_PIOD_PPUSR ((AT91_REG *) 0xFFFFFA68) /* Pad Pull-up stat Reg */ -#define AT91C_PIOD_PPUDR ((AT91_REG *) 0xFFFFFA60) /* Pull-up Disable Reg */ -#define AT91C_PIOD_MDSR ((AT91_REG *) 0xFFFFFA58) /* Multi-driver stat Reg */ -#define AT91C_PIOD_PSR ((AT91_REG *) 0xFFFFFA08) /* PIO stat Reg */ -#define AT91C_PIOD_OER ((AT91_REG *) 0xFFFFFA10) /* Output Enable Reg */ -#define AT91C_PIOD_OSR ((AT91_REG *) 0xFFFFFA18) /* Output stat Reg */ -#define AT91C_PIOD_IFER ((AT91_REG *) 0xFFFFFA20) /* Input Filter Enable Reg */ -#define AT91C_PIOD_BSR ((AT91_REG *) 0xFFFFFA74) /* Select B Reg */ -#define AT91C_PIOD_IFDR ((AT91_REG *) 0xFFFFFA24) /* Input Filter Disable Reg */ -#define AT91C_PIOD_IFSR ((AT91_REG *) 0xFFFFFA28) /* Input Filter stat Reg */ - -#define AT91C_PIO_PD0 ((unsigned int) 1 << 0) /* Pin Controlled by PD0 */ -#define AT91C_PD0_ETX0 ((unsigned int) AT91C_PIO_PD0) /* Enet MAC Tx Data 0*/ -#define AT91C_PIO_PD1 ((unsigned int) 1 << 1) /* Pin Controlled by PD1 */ -#define AT91C_PD1_ETX1 ((unsigned int) AT91C_PIO_PD1) /* Enet MAC Tx Data 1*/ -#define AT91C_PIO_PD10 ((unsigned int) 1 << 10) /* Pin Controlled by PD10 */ -#define AT91C_PD10_PCK3 ((unsigned int) AT91C_PIO_PD10) /* PMC Prog Clk Oput 3*/ -#define AT91C_PD10_TPS1 ((unsigned int) AT91C_PIO_PD10) /* ETMARM9 pl stat1 */ -#define AT91C_PIO_PD11 ((unsigned int) 1 << 11) /* Pin Controlled by PD11 */ -#define AT91C_PD11_ ((unsigned int) AT91C_PIO_PD11) /* */ -#define AT91C_PD11_TPS2 ((unsigned int) AT91C_PIO_PD11) /* ETMARM9 pl stat2 */ -#define AT91C_PIO_PD12 ((unsigned int) 1 << 12) /* Pin Controlled by PD12 */ -#define AT91C_PD12_ ((unsigned int) AT91C_PIO_PD12) /* */ -#define AT91C_PD12_TPK0 ((unsigned int) AT91C_PIO_PD12) /* ETM Trace Pkt 0 */ -#define AT91C_PIO_PD13 ((unsigned int) 1 << 13) /* Pin Controlled by PD13 */ -#define AT91C_PD13_ ((unsigned int) AT91C_PIO_PD13) /* */ -#define AT91C_PD13_TPK1 ((unsigned int) AT91C_PIO_PD13) /* ETM Trace Pkt 1 */ -#define AT91C_PIO_PD14 ((unsigned int) 1 << 14) /* Pin Controlled by PD14 */ -#define AT91C_PD14_ ((unsigned int) AT91C_PIO_PD14) /* */ -#define AT91C_PD14_TPK2 ((unsigned int) AT91C_PIO_PD14) /* ETM Trace Pkt 2 */ -#define AT91C_PIO_PD15 ((unsigned int) 1 << 15) /* Pin Controlled by PD15 */ -#define AT91C_PD15_TD0 ((unsigned int) AT91C_PIO_PD15) /* SSC TxD */ -#define AT91C_PD15_TPK3 ((unsigned int) AT91C_PIO_PD15) /* ETM Trace Pkt 3 */ -#define AT91C_PIO_PD16 ((unsigned int) 1 << 16) /* Pin Controlled by PD16 */ -#define AT91C_PD16_TD1 ((unsigned int) AT91C_PIO_PD16) /* SSC TxD 1 */ -#define AT91C_PD16_TPK4 ((unsigned int) AT91C_PIO_PD16) /* ETM Trace Pkt 4 */ -#define AT91C_PIO_PD17 ((unsigned int) 1 << 17) /* Pin Controlled by PD17 */ -#define AT91C_PD17_TD2 ((unsigned int) AT91C_PIO_PD17) /* SSC TxD 2 */ -#define AT91C_PD17_TPK5 ((unsigned int) AT91C_PIO_PD17) /* ETM Trace Pkt 5 */ -#define AT91C_PIO_PD18 ((unsigned int) 1 << 18) /* Pin Controlled by PD18 */ -#define AT91C_PD18_NPCS1 ((unsigned int) AT91C_PIO_PD18) /* SPI Perip CS 1 */ -#define AT91C_PD18_TPK6 ((unsigned int) AT91C_PIO_PD18) /* ETM Trace Pkt 6 */ -#define AT91C_PIO_PD19 ((unsigned int) 1 << 19) /* Pin Controlled by PD19 */ -#define AT91C_PD19_NPCS2 ((unsigned int) AT91C_PIO_PD19) /* SPI Perip CS 2 */ -#define AT91C_PD19_TPK7 ((unsigned int) AT91C_PIO_PD19) /* ETM Trace Pkt 7 */ -#define AT91C_PIO_PD2 ((unsigned int) 1 << 2) /* Pin Controlled by PD2 */ -#define AT91C_PD2_ETX2 ((unsigned int) AT91C_PIO_PD2) /* Ethernet MAC TxD 2 */ -#define AT91C_PIO_PD20 ((unsigned int) 1 << 20) /* Pin Controlled by PD20 */ -#define AT91C_PD20_NPCS3 ((unsigned int) AT91C_PIO_PD20) /* SPI Perip CS 3 */ -#define AT91C_PD20_TPK8 ((unsigned int) AT91C_PIO_PD20) /* ETM Trace Pkt 8 */ -#define AT91C_PIO_PD21 ((unsigned int) 1 << 21) /* Pin Controlled by PD21 */ -#define AT91C_PD21_RTS0 ((unsigned int) AT91C_PIO_PD21) /* Usart 0 RTS */ -#define AT91C_PD21_TPK9 ((unsigned int) AT91C_PIO_PD21) /* ETM Trace Pkt 9 */ -#define AT91C_PIO_PD22 ((unsigned int) 1 << 22) /* Pin Controlled by PD22 */ -#define AT91C_PD22_RTS1 ((unsigned int) AT91C_PIO_PD22) /* Usart 0 RTS */ -#define AT91C_PD22_TPK10 ((unsigned int) AT91C_PIO_PD22) /* ETM Trace Pkt 10 */ -#define AT91C_PIO_PD23 ((unsigned int) 1 << 23) /* Pin Controlled by PD23 */ -#define AT91C_PD23_RTS2 ((unsigned int) AT91C_PIO_PD23) /* USART 2 RTS */ -#define AT91C_PD23_TPK11 ((unsigned int) AT91C_PIO_PD23) /* ETM Trace Pkt 11 */ -#define AT91C_PIO_PD24 ((unsigned int) 1 << 24) /* Pin Controlled by PD24 */ -#define AT91C_PD24_RTS3 ((unsigned int) AT91C_PIO_PD24) /* USART 3 RTS */ -#define AT91C_PD24_TPK12 ((unsigned int) AT91C_PIO_PD24) /* ETM Trace Pkt 12 */ -#define AT91C_PIO_PD25 ((unsigned int) 1 << 25) /* Pin Controlled by PD25 */ -#define AT91C_PD25_DTR1 ((unsigned int) AT91C_PIO_PD25) /* USART 1 DTR */ -#define AT91C_PD25_TPK13 ((unsigned int) AT91C_PIO_PD25) /* ETM Trace Pkt 13 */ -#define AT91C_PIO_PD26 ((unsigned int) 1 << 26) /* Pin Controlled by PD26 */ -#define AT91C_PD26_TPK14 ((unsigned int) AT91C_PIO_PD26) /* ETM Trace Pkt 14 */ -#define AT91C_PIO_PD27 ((unsigned int) 1 << 27) /* Pin Controlled by PD27 */ -#define AT91C_PD27_TPK15 ((unsigned int) AT91C_PIO_PD27) /* ETM Trace Pkt 15 */ -#define AT91C_PIO_PD3 ((unsigned int) 1 << 3) /* Pin Controlled by PD3 */ -#define AT91C_PD3_ETX3 ((unsigned int) AT91C_PIO_PD3) /* Enet MAC TxD 3 */ -#define AT91C_PIO_PD4 ((unsigned int) 1 << 4) /* Pin Controlled by PD4 */ -#define AT91C_PD4_ETXEN ((unsigned int) AT91C_PIO_PD4) /* Enet MAC TxEn */ -#define AT91C_PIO_PD5 ((unsigned int) 1 << 5) /* Pin Controlled by PD5 */ -#define AT91C_PD5_ETXER ((unsigned int) AT91C_PIO_PD5) /* Enet MAC TxCE */ -#define AT91C_PIO_PD6 ((unsigned int) 1 << 6) /* Pin Controlled by PD6 */ -#define AT91C_PD6_DTXD ((unsigned int) AT91C_PIO_PD6) /* DBGU Debug TxD */ -#define AT91C_PIO_PD7 ((unsigned int) 1 << 7) /* Pin Controlled by PD7 */ -#define AT91C_PD7_PCK0 ((unsigned int) AT91C_PIO_PD7) /* PMC Prog Clk Oput 0*/ -#define AT91C_PD7_TSYNC ((unsigned int) AT91C_PIO_PD7) /* ETM Sync signal */ -#define AT91C_PIO_PD8 ((unsigned int) 1 << 8) /* Pin Controlled by PD8 */ -#define AT91C_PD8_PCK1 ((unsigned int) AT91C_PIO_PD8) /* PMC Prog Clk Oput 1*/ -#define AT91C_PD8_TCLK ((unsigned int) AT91C_PIO_PD8) /* ETM Trace Clk sig */ -#define AT91C_PIO_PD9 ((unsigned int) 1 << 9) /* Pin Controlled by PD9 */ -#define AT91C_PD9_PCK2 ((unsigned int) AT91C_PIO_PD9) /* PMC Prog Clk 2 */ -#define AT91C_PD9_TPS0 ((unsigned int) AT91C_PIO_PD9) /* ETM ARM9 pl stat0 */ -#define AT91C_PIO_PB6 ((unsigned int) 1 << 6) /* Pin Controlled by PB6 */ -#define AT91C_PIO_PC5 ((unsigned int) 1 << 5) -#define AT91C_PIO_PC14 ((unsigned int) 1 << 14) /* Pin Controlled by PC1 */ -#define AT91C_PIO_PC15 ((unsigned int) 1 << 15) /* Pin Controlled by PC1 */ -#define AT91C_PIO_PA19 ((unsigned int) 1 << 19) /* Pin Controlled by PC1 */ -#define AT91C_PIO_PB2 ((unsigned int) 1 << 2) /* Pin Controlled by PC1 */ -#define AT91C_PIO_PB8 ((unsigned int) 1 << 8) -#define AT91C_PIO_PB9 ((unsigned int) 1 << 9) -#define AT91C_PIO_PB10 ((unsigned int) 1 << 10) -#define AT91C_PIO_PB11 ((unsigned int) 1 << 11) -#define AT91C_PIO_PB17 ((unsigned int) 1 << 17) -#define AT91C_PIO_PB28 ((unsigned int) 1 << 28) -#define AT91C_PIO_PB29 ((unsigned int) 1 << 29) - -typedef enum { - M501SK_BUZZER = 38, - M501SK_DEBUG_LED1 = 96, - M501SK_DEBUG_LED2, - M501SK_DEBUG_LED3, - M501SK_DEBUG_LED4, - M501SK_READY_LED = 102, -} M501SK_PIO; - -void m501sk_gpio_init(void); -uchar m501sk_gpio_set(M501SK_PIO io); -uchar m501sk_gpio_clear(M501SK_PIO io); - -#endif diff --git a/boards.cfg b/boards.cfg index ae3c093..e684d73 100644 --- a/boards.cfg +++ b/boards.cfg @@ -57,7 +57,6 @@ at91rm9200ek_ram arm arm920t at91rm9200ek atmel eb_cpux9k2 arm arm920t - BuS at91 cpuat91 arm arm920t cpuat91 eukrea at91 cpuat91 cpuat91_ram arm arm920t cpuat91 eukrea at91 cpuat91:RAMBOOT -m501sk arm arm920t - - at91rm9200 at91rm9200dk arm arm920t - atmel at91rm9200 mx1ads arm arm920t - - imx scb9328 arm arm920t - - imx diff --git a/doc/README.scrapyard b/doc/README.scrapyard index 24233a0..104430d 100644 --- a/doc/README.scrapyard +++ b/doc/README.scrapyard @@ -11,6 +11,7 @@ easily if here is something they might want to dig for... Board Arch CPU removed Commit last known maintainer/contact ============================================================================= +m501sk arm arm920t - 2011-07-17 kb9202 arm arm920t - 2011-07-17 csb637 arm arm920t - 2011-07-17 cmc_pu2 arm arm920t - 2011-07-17 diff --git a/include/configs/m501sk.h b/include/configs/m501sk.h deleted file mode 100644 index 68f0415..0000000 --- a/include/configs/m501sk.h +++ /dev/null @@ -1,228 +0,0 @@ -/* - * Based on Modifications by Alan Lu / Artila and - * Rick Bronson - * - * Configuration settings for the Artila M-501 starter kit, - * with V02 processor card. - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -#ifndef __CONFIG_H -#define __CONFIG_H - -#define CONFIG_AT91_LEGACY - -/* ARM asynchronous clock */ -/* from 18.432 MHz crystal (18432000 / 4 * 39) */ -#define AT91C_MAIN_CLOCK 179712000 -/* Perip clock (AT91C_MASTER_CLOCK / 3) */ -#define AT91C_MASTER_CLOCK 59904000 -#define AT91_SLOW_CLOCK 32768 /* slow clock */ - -#define CONFIG_AT91RM9200 1 /* It's an Atmel AT91RM9200 SoC */ -#define CONFIG_AT91RM9200DK 1 /* on an AT91RM9200DK Board */ -#undef CONFIG_USE_IRQ /* we don't need IRQ/FIQ stuff */ -#define CONFIG_CMDLINE_TAG 1 /* enable passing of ATAGs */ -#define CONFIG_SETUP_MEMORY_TAGS 1 -#define CONFIG_INITRD_TAG 1 - -#define CONFIG_MENUPROMPT "." -/* - * LowLevel Init - */ -#define CONFIG_SYS_USE_MAIN_OSCILLATOR 1 -/* flash */ -#define CONFIG_SYS_EBI_CFGR_VAL 0x00000000 -#define CONFIG_SYS_SMC_CSR0_VAL 0x00003284 /* 16bit, 2 TDF, 4 WS */ - -/* clocks */ -#define CONFIG_SYS_PLLAR_VAL 0x20263E04 /* 179.712000 MHz for PCK */ -#define CONFIG_SYS_PLLBR_VAL 0x10483E0E /* 48.054857 MHz (divider by 2 for USB) */ -/* PCK/3 = MCK Master Clock = 59.904000MHz from PLLA */ -#define CONFIG_SYS_MCKR_VAL 0x00000202 - -/* sdram */ -#define CONFIG_SYS_PIOC_ASR_VAL 0xFFFF0000 /* Configure PIOC as peripheral (D16/D31) */ -#define CONFIG_SYS_PIOC_BSR_VAL 0x00000000 -#define CONFIG_SYS_PIOC_PDR_VAL 0xFFFF0000 -#define CONFIG_SYS_EBI_CSA_VAL 0x00000002 /* CS1=CONFIG_SYS_SDRAM */ -#define CONFIG_SYS_SDRC_CR_VAL 0x2188c155 /* set up the CONFIG_SYS_SDRAM */ -#define CONFIG_SYS_SDRAM 0x20000000 /* address of the CONFIG_SYS_SDRAM */ -#define CONFIG_SYS_SDRAM1 0x20000080 /* address of the CONFIG_SYS_SDRAM */ -#define CONFIG_SYS_SDRAM_VAL 0x00000000 /* value written to CONFIG_SYS_SDRAM */ -#define CONFIG_SYS_SDRC_MR_VAL 0x00000002 /* Precharge All */ -#define CONFIG_SYS_SDRC_MR_VAL1 0x00000004 /* refresh */ -#define CONFIG_SYS_SDRC_MR_VAL2 0x00000003 /* Load Mode Register */ -#define CONFIG_SYS_SDRC_MR_VAL3 0x00000000 /* Normal Mode */ -#define CONFIG_SYS_SDRC_TR_VAL 0x000002E0 /* Write refresh rate */ - -/* - * Size of malloc() pool - */ -#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 128*1024) - -#define CONFIG_BAUDRATE 115200 - -/* Hardcode so no __divsi3 : AT91C_MASTER_CLOCK / baudrate / 16 */ -#define CONFIG_SYS_AT91C_BRGR_DIVISOR 33 - -/* - * Hardware drivers - */ -#define CONFIG_SYS_FLASH_CFI 1 -#define CONFIG_FLASH_CFI_DRIVER 1 -#define CONFIG_ENV_SECT_SIZE 0x20000 -#define CONFIG_SYS_FLASH_USE_BUFFER_WRITE -#define CONFIG_SYS_FLASH_PROTECTION /*for Intel P30 Flash*/ -#define CONFIG_HARD_I2C -#define CONFIG_SYS_I2C_SPEED 100 -#define CONFIG_SYS_I2C_SLAVE 0 -#define CONFIG_SYS_CONSOLE_INFO_QUIET -#undef CONFIG_ENV_IS_IN_EEPROM -#define CONFIG_SYS_I2C_EEPROM_ADDR 0x50 -#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1 -#define CONFIG_SYS_EEPROM_AT24C16 -#define CONFIG_SYS_I2C_RTC_ADDR 0x32 -#undef CONFIG_RTC_DS1338 -#define CONFIG_RTC_RS5C372A -#undef CONFIG_POST -#define CONFIG_M501SK -#define CONFIG_CMC_PU2 - -/* define one of these to choose the DBGU, USART0 or USART1 as console */ -#define CONFIG_AT91RM9200_USART -#define CONFIG_DBGU -#undef CONFIG_USART0 -#undef CONFIG_USART1 - -#undef CONFIG_HWFLOW /* don't include RTS/CTS flow control support */ -#undef CONFIG_MODEM_SUPPORT /* disable modem initialization stuff */ - -#define CONFIG_BOOTARGS "mem=32M console=ttyS0,115200 " \ - "initrd=0x20800000,8192000 ramdisk_size=15360 " \ - "root=/dev/ram0 rw mtdparts=phys_mapped_flash:" \ - "128k(loader)ro,128k(reserved)ro,1408k(linux)" \ - "ro,2560k(ramdisk)ro,-(userdisk)" -#define CONFIG_BOOTCOMMAND "bootm 10040000 101a0000" -#define CONFIG_BOOTDELAY 1 -#define CONFIG_BAUDRATE 115200 -#define CONFIG_IPADDR 192.168.1.100 -#define CONFIG_SERVERIP 192.168.1.1 -#define CONFIG_GATEWAYIP 192.168.1.254 -#define CONFIG_NETMASK 255.255.255.0 -#define CONFIG_BOOTFILE uImage -#define CONFIG_ETHADDR 00:13:48:aa:bb:cc -#define CONFIG_ENV_OVERWRITE 1 -#define BOARD_LATE_INIT - -#define CONFIG_EXTRA_ENV_SETTINGS \ - "unlock=yes\0" - -#define CONFIG_CMD_JFFS2 -#undef CONFIG_CMD_EEPROM -#define CONFIG_CMD_NET -#define CONFIG_CMD_RUN -#define CONFIG_CMD_DHCP -#define CONFIG_CMD_MEMORY -#define CONFIG_CMD_PING -#define CONFIG_CMD_SDRAM -#define CONFIG_CMD_DIAG -#define CONFIG_CMD_I2C -#define CONFIG_CMD_DATE -#define CONFIG_CMD_POST -#define CONFIG_CMD_MISC -#define CONFIG_CMD_LOADS -#define CONFIG_CMD_IMI -#define CONFIG_CMD_NFS -#define CONFIG_CMD_FLASH -#define CONFIG_CMD_SAVEENV - -#define CONFIG_SYS_HUSH_PARSER -#define CONFIG_AUTO_COMPLETE -#define CONFIG_SYS_PROMPT_HUSH_PS2 ">>" - -#define CONFIG_SYS_MAX_NAND_DEVICE 0 /* Max number of NAND devices */ - -#define CONFIG_NR_DRAM_BANKS 1 -#define PHYS_SDRAM 0x20000000 -#define PHYS_SDRAM_SIZE 0x2000000 /* 32 megs */ - -#define CONFIG_SYS_MEMTEST_START 0x21000000 /* PHYS_SDRAM */ -/* CONFIG_SYS_MEMTEST_START + PHYS_SDRAM_SIZE - 262144 */ -#define CONFIG_SYS_MEMTEST_END 0x00100000 - -#define CONFIG_NET_MULTI 1 -#ifdef CONFIG_NET_MULTI -#define CONFIG_DRIVER_AT91EMAC 1 -#define CONFIG_SYS_RX_ETH_BUFFER 8 -#else -#define CONFIG_DRIVER_ETHER 1 -#endif -#define CONFIG_NET_RETRY_COUNT 20 -#define CONFIG_AT91C_USE_RMII - -#define PHYS_FLASH_1 0x10000000 -#define PHYS_FLASH_SIZE 0x800000 /* 8 megs main flash */ -#define CONFIG_SYS_FLASH_BASE PHYS_FLASH_1 -#define CONFIG_SYS_MAX_FLASH_BANKS 1 -#define CONFIG_SYS_MAX_FLASH_SECT 256 -#define CONFIG_SYS_FLASH_ERASE_TOUT (2*CONFIG_SYS_HZ) /* Timeout for Flash Erase */ -#define CONFIG_SYS_FLASH_WRITE_TOUT (2*CONFIG_SYS_HZ) /* Timeout for Flash Write */ - -#ifdef CONFIG_ENV_IS_IN_DATAFLASH -#define CONFIG_ENV_OFFSET 0x20000 -#define CONFIG_ENV_ADDR (CONFIG_SYS_DATAFLASH_LOGIC_ADDR_CS0 + CONFIG_ENV_OFFSET) -#define CONFIG_ENV_SIZE 0x2000 -#else -#define CONFIG_ENV_IS_IN_FLASH -#define CONFIG_ENV_ADDR (PHYS_FLASH_1 + 0x00020000) -#define CONFIG_ENV_SIZE 2048 -#endif - -#ifdef CONFIG_ENV_IS_IN_EEPROM -#define CONFIG_ENV_OFFSET 1024 -#define CONFIG_ENV_SIZE 1024 -#endif - -#define CONFIG_SYS_LOAD_ADDR 0x21000000 /* default load address */ - -/* use for protect flash sectors */ -#define CONFIG_SYS_BOOT_SIZE 0x6000 /* 24 KBytes */ -#define CONFIG_SYS_U_BOOT_BASE (PHYS_FLASH_1 + 0x10000) -#define CONFIG_SYS_U_BOOT_SIZE 0x10000 /* 64 KBytes */ - -#define CONFIG_SYS_BAUDRATE_TABLE { 115200 , 19200, 38400, 57600, 9600 } - -#define CONFIG_SYS_PROMPT "U-Boot> " /* Monitor Command Prompt */ -#define CONFIG_SYS_CBSIZE 512 /* Console I/O Buffer Size */ -#define CONFIG_SYS_MAXARGS 16 /* max number of command args */ -/* Print Buffer Size */ -#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) - -#define CONFIG_SYS_HZ 1000 -#define CONFIG_SYS_HZ_CLOCK AT91C_MASTER_CLOCK/2 - -#define CONFIG_STACKSIZE (32*1024) /* regular stack */ - -#ifdef CONFIG_USE_IRQ -#error CONFIG_USE_IRQ not supported -#endif - -#endif -- 1.7.6