From mboxrd@z Thu Jan 1 00:00:00 1970 Return-path: Received: from mms2.broadcom.com ([216.31.210.18]:1181 "EHLO mms2.broadcom.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1751066Ab1IAJRg (ORCPT ); Thu, 1 Sep 2011 05:17:36 -0400 From: "Roland Vossen" To: gregkh@suse.de cc: devel@linuxdriverproject.org, linux-wireless@vger.kernel.org Subject: [PATCH 26/30] staging: brcm80211: macro cleanup in softmac aiutils.h Date: Thu, 1 Sep 2011 11:17:16 +0200 Message-ID: <1314868640-9425-27-git-send-email-rvossen@broadcom.com> (sfid-20110901_111756_322502_72D5400D) In-Reply-To: <1314868640-9425-1-git-send-email-rvossen@broadcom.com> References: <1314868640-9425-1-git-send-email-rvossen@broadcom.com> MIME-Version: 1.0 Content-Type: text/plain Sender: linux-wireless-owner@vger.kernel.org List-ID: Moved, deleted or substituted macro's. Reported-by: Johannes Berg Reviewed-by: Arend van Spriel Reviewed-by: Pieter-Paul Giesberts Signed-off-by: Roland Vossen --- drivers/staging/brcm80211/brcmsmac/aiutils.c | 160 ++++++++++++-------- drivers/staging/brcm80211/brcmsmac/aiutils.h | 207 +++++--------------------- drivers/staging/brcm80211/brcmsmac/main.c | 45 +++---- drivers/staging/brcm80211/brcmsmac/pmu.c | 4 +- 4 files changed, 151 insertions(+), 265 deletions(-) diff --git a/drivers/staging/brcm80211/brcmsmac/aiutils.c b/drivers/staging/brcm80211/brcmsmac/aiutils.c index 48489ce..9510d83 100644 --- a/drivers/staging/brcm80211/brcmsmac/aiutils.c +++ b/drivers/staging/brcm80211/brcmsmac/aiutils.c @@ -285,6 +285,80 @@ /* resetctrl */ #define AIRC_RESET 1 +#define NOREV -1 /* Invalid rev */ + +/* GPIO Based LED powersave defines */ +#define DEFAULT_GPIO_ONTIME 10 /* Default: 10% on */ +#define DEFAULT_GPIO_OFFTIME 90 /* Default: 10% on */ + +/* When Srom support present, fields in sromcontrol */ +#define SRC_START 0x80000000 +#define SRC_BUSY 0x80000000 +#define SRC_OPCODE 0x60000000 +#define SRC_OP_READ 0x00000000 +#define SRC_OP_WRITE 0x20000000 +#define SRC_OP_WRDIS 0x40000000 +#define SRC_OP_WREN 0x60000000 +#define SRC_OTPSEL 0x00000010 +#define SRC_LOCK 0x00000008 +#define SRC_SIZE_MASK 0x00000006 +#define SRC_SIZE_1K 0x00000000 +#define SRC_SIZE_4K 0x00000002 +#define SRC_SIZE_16K 0x00000004 +#define SRC_SIZE_SHIFT 1 +#define SRC_PRESENT 0x00000001 + +/* External PA enable mask */ +#define GPIO_CTRL_EPA_EN_MASK 0x40 + +#define DEFAULT_GPIOTIMERVAL \ + ((DEFAULT_GPIO_ONTIME << GPIO_ONTIME_SHIFT) | DEFAULT_GPIO_OFFTIME) + +#define BADIDX (SI_MAXCORES + 1) + +/* Newer chips can access PCI/PCIE and CC core without requiring to change + * PCI BAR0 WIN + */ +#define SI_FAST(si) (((si)->pub.buscoretype == PCIE_CORE_ID) || \ + (((si)->pub.buscoretype == PCI_CORE_ID) && \ + (si)->pub.buscorerev >= 13)) + +#define CCREGS_FAST(si) (((char *)((si)->curmap) + PCI_16KB0_CCREGS_OFFSET)) + +#define IS_SIM(chippkg) \ + ((chippkg == HDLSIM_PKG_ID) || (chippkg == HWSIM_PKG_ID)) + +/* + * Macros to disable/restore function core(D11, ENET, ILINE20, etc) interrupts + * before after core switching to avoid invalid register accesss inside ISR. + */ +#define INTR_OFF(si, intr_val) \ + if ((si)->intrsoff_fn && \ + (si)->coreid[(si)->curidx] == (si)->dev_coreid) \ + intr_val = (*(si)->intrsoff_fn)((si)->intr_arg) + +#define INTR_RESTORE(si, intr_val) \ + if ((si)->intrsrestore_fn && \ + (si)->coreid[(si)->curidx] == (si)->dev_coreid) \ + (*(si)->intrsrestore_fn)((si)->intr_arg, intr_val) + +#define PCI(si) ((si)->pub.buscoretype == PCI_CORE_ID) +#define PCIE(si) ((si)->pub.buscoretype == PCIE_CORE_ID) + +#define PCI_FORCEHT(si) (PCIE(si) && (si->pub.chip == BCM4716_CHIP_ID)) + +#ifdef BCMDBG +#define SI_MSG(args) printk args +#else +#define SI_MSG(args) +#endif /* BCMDBG */ + +#define GOODCOREADDR(x, b) \ + (((x) >= (b)) && ((x) < ((b) + SI_MAXCORES * SI_CORE_SIZE)) && \ + IS_ALIGNED((x), SI_CORE_SIZE)) + +#define PCIEREGS(si) (((char *)((si)->curmap) + PCI_16KB0_PCIREGS_OFFSET)) + struct aidmp { u32 oobselina30; /* 0x000 */ u32 oobselina74; /* 0x004 */ @@ -435,11 +509,6 @@ get_erom_ent(struct si_pub *sih, u32 **eromptr, u32 mask, u32 match) nom++; } - SI_VMSG(("%s: Returning ent 0x%08x\n", __func__, ent)); - if (inv + nom) - SI_VMSG((" after %d invalid and %d non-matching entries\n", - inv, nom)); - return ent; } @@ -472,9 +541,6 @@ get_asd(struct si_pub *sih, u32 **eromptr, uint sp, uint ad, uint st, } else *sizel = AD_SZ_BASE << (sz >> AD_SZ_SHIFT); - SI_VMSG((" SP %d, ad %d: st = %d, 0x%08x_0x%08x @ 0x%08x_0x%08x\n", - sp, ad, st, *sizeh, *sizel, *addrh, *addrl)); - return asd; } @@ -500,8 +566,6 @@ static void ai_scan(struct si_pub *sih, struct chipcregs *cc) eromptr = regs; eromlim = eromptr + (ER_REMAPCONTROL / sizeof(u32)); - SI_VMSG(("ai_scan: regs = 0x%p, erombase = 0x%08x, eromptr = 0x%p, " - "eromlim = 0x%p\n", regs, erombase, eromptr, eromlim)); while (eromptr < eromlim) { u32 cia, cib, cid, mfg, crev, nmw, nsw, nmp, nsp; u32 mpd, asd, addrl, addrh, sizel, sizeh; @@ -514,8 +578,7 @@ static void ai_scan(struct si_pub *sih, struct chipcregs *cc) /* Grok a component */ cia = get_erom_ent(sih, &eromptr, ER_TAG, ER_CI); if (cia == (ER_END | ER_VALID)) { - SI_VMSG(("Found END of erom after %d cores\n", - sii->numcores)); + /* Found END of erom */ ai_hwfixup(sii); return; } @@ -523,7 +586,7 @@ static void ai_scan(struct si_pub *sih, struct chipcregs *cc) cib = get_erom_ent(sih, &eromptr, 0, 0); if ((cib & ER_TAG) != ER_CI) { - SI_ERROR(("CIA not followed by CIB\n")); + /* CIA not followed by CIB */ goto error; } @@ -535,10 +598,6 @@ static void ai_scan(struct si_pub *sih, struct chipcregs *cc) nmp = (cib & CIB_NMP_MASK) >> CIB_NMP_SHIFT; nsp = (cib & CIB_NSP_MASK) >> CIB_NSP_SHIFT; - SI_VMSG(("Found component 0x%04x/0x%04x rev %d at erom addr " - "0x%p, with nmw = %d, nsw = %d, nmp = %d & nsp = %d\n", - mfg, cid, crev, base, nmw, nsw, nmp, nsp)); - if (((mfg == MFGID_ARM) && (cid == DEF_AI_COMP)) || (nsp == 0)) continue; if ((nmw + nsw == 0)) { @@ -561,13 +620,9 @@ static void ai_scan(struct si_pub *sih, struct chipcregs *cc) for (i = 0; i < nmp; i++) { mpd = get_erom_ent(sih, &eromptr, ER_VALID, ER_VALID); if ((mpd & ER_TAG) != ER_MP) { - SI_ERROR(("Not enough MP entries for " - "component 0x%x\n", cid)); + /* Not enough MP entries for component */ goto error; } - SI_VMSG((" Master port %d, mp: %d id: %d\n", i, - (mpd & MPD_MP_MASK) >> MPD_MP_SHIFT, - (mpd & MPD_MUI_MASK) >> MPD_MUI_SHIFT)); } /* First Slave Address Descriptor should be port 0: @@ -585,8 +640,7 @@ static void ai_scan(struct si_pub *sih, struct chipcregs *cc) br = true; else if ((addrh != 0) || (sizeh != 0) || (sizel != SI_CORE_SIZE)) { - SI_ERROR(("First Slave ASD for core 0x%04x " - "malformed (0x%08x)\n", cid, asd)); + /* First Slave ASD for core malformed */ goto error; } } @@ -614,8 +668,7 @@ static void ai_scan(struct si_pub *sih, struct chipcregs *cc) &addrl, &addrh, &sizel, &sizeh); } while (asd != 0); if (j == 0) { - SI_ERROR((" SP %d has no address descriptors\n", - i)); + /* SP has no address descriptors */ goto error; } } @@ -626,11 +679,11 @@ static void ai_scan(struct si_pub *sih, struct chipcregs *cc) get_asd(sih, &eromptr, i, 0, AD_ST_MWRAP, &addrl, &addrh, &sizel, &sizeh); if (asd == 0) { - SI_ERROR(("Missing descriptor for MW %d\n", i)); + /* Missing descriptor for MW */ goto error; } if ((sizeh != 0) || (sizel != SI_CORE_SIZE)) { - SI_ERROR(("Master wrapper %d is not 4KB\n", i)); + /* Master wrapper %d is not 4KB */ goto error; } if (i == 0) @@ -644,11 +697,11 @@ static void ai_scan(struct si_pub *sih, struct chipcregs *cc) get_asd(sih, &eromptr, fwp + i, 0, AD_ST_SWRAP, &addrl, &addrh, &sizel, &sizeh); if (asd == 0) { - SI_ERROR(("Missing descriptor for SW %d\n", i)); + /* Missing descriptor for SW */ goto error; } if ((sizeh != 0) || (sizel != SI_CORE_SIZE)) { - SI_ERROR(("Slave wrapper %d is not 4KB\n", i)); + /* Slave wrapper is not 4KB */ goto error; } if ((nmw == 0) && (i == 0)) @@ -663,9 +716,8 @@ static void ai_scan(struct si_pub *sih, struct chipcregs *cc) sii->numcores++; } - SI_ERROR(("Reached end of erom without finding END")); - error: + /* Reached end of erom without finding END */ sii->numcores = 0; return; } @@ -715,8 +767,7 @@ u32 ai_addrspace(struct si_pub *sih, uint asidx) else if (asidx == 1) return sii->coresba2[cidx]; else { - SI_ERROR(("%s: Need to parse the erom again to find addr " - "space %d\n", __func__, asidx)); + /* Need to parse the erom again to find addr space */ return 0; } } @@ -735,8 +786,7 @@ u32 ai_addrspacesize(struct si_pub *sih, uint asidx) else if (asidx == 1) return sii->coresba2_size[cidx]; else { - SI_ERROR(("%s: Need to parse the erom again to find addr " - "space %d\n", __func__, asidx)); + /* Need to parse the erom again to find addr */ return 0; } } @@ -907,10 +957,6 @@ ai_buscore_setup(struct si_info *sii, u32 savewin, uint *origidx) cid = ai_coreid(&sii->pub); crev = ai_corerev(&sii->pub); - /* Display cores found */ - SI_VMSG(("CORE[%d]: id 0x%x rev %d base 0x%x regs 0x%p\n", - i, cid, crev, sii->coresba[i], sii->regs[i])); - if (cid == PCI_CORE_ID) { pciidx = i; pcirev = crev; @@ -943,9 +989,6 @@ ai_buscore_setup(struct si_info *sii, u32 savewin, uint *origidx) sii->pub.buscoreidx = pcieidx; } - SI_VMSG(("Buscore id/type/rev %d/0x%x/%d\n", sii->pub.buscoreidx, - sii->pub.buscoretype, sii->pub.buscorerev)); - /* fixup necessary chip/core configurations */ if (SI_FAST(sii)) { if (!sii->pch) { @@ -956,7 +999,7 @@ ai_buscore_setup(struct si_info *sii, u32 savewin, uint *origidx) } } if (ai_pci_fixcfg(&sii->pub)) { - SI_ERROR(("si_doattach: si_pci_fixcfg failed\n")); + /* si_doattach: si_pci_fixcfg failed */ return false; } @@ -980,20 +1023,11 @@ static __used void ai_nvram_process(struct si_info *sii, char *pvars) "boardvendor"); if (sii->pub.boardvendor == 0) sii->pub.boardvendor = w & 0xffff; - else - SI_ERROR(("Overriding boardvendor: 0x%x instead of " - "0x%x\n", sii->pub.boardvendor, w & 0xffff)); sii->pub.boardtype = (u16)ai_getdevpathintvar(&sii->pub, "boardtype"); if (sii->pub.boardtype == 0) sii->pub.boardtype = (w >> 16) & 0xffff; - else - SI_ERROR(("Overriding boardtype: 0x%x instead of 0x%x\n" - , sii->pub.boardtype, (w >> 16) & 0xffff)); - - if (sii->pub.boardtype == 0) - SI_ERROR(("si_doattach: unknown board type\n")); sii->pub.boardflags = getintvar(pvars, "boardflags"); } @@ -1029,7 +1063,6 @@ static struct si_info *ai_doattach(struct si_info *sii, /* bus/core/clk setup for register access */ if (!ai_buscore_prep(sii)) { - SI_ERROR(("si_doattach: si_core_clk_prep failed\n")); return NULL; } @@ -1055,24 +1088,21 @@ static struct si_info *ai_doattach(struct si_info *sii, /* pass chipc address instead of original core base */ ai_scan(&sii->pub, cc); } else { - SI_ERROR(("Found chip of unknown type (0x%08x)\n", w)); + /* Found chip of unknown type */ return NULL; } /* no cores found, bail out */ if (sii->numcores == 0) { - SI_ERROR(("si_doattach: could not find any cores\n")); return NULL; } /* bus/core/clk setup */ origidx = SI_CC_IDX; if (!ai_buscore_setup(sii, savewin, &origidx)) { - SI_ERROR(("si_doattach: si_buscore_setup failed\n")); goto exit; } /* Init nvram from sprom/otp if they exist */ if (srom_var_init(&sii->pub, cc, vars, varsz)) { - SI_ERROR(("si_doattach: srom_var_init failed: bad srom\n")); goto exit; } pvars = vars ? *vars : NULL; @@ -1085,7 +1115,7 @@ static struct si_info *ai_doattach(struct si_info *sii, ai_setcoreidx(sih, origidx); /* PMU specific initializations */ - if (PMUCTL_ENAB(sih)) { + if (sih->cccaps & CC_CAP_PMU) { u32 xtalfreq; si_pmu_init(sih); si_pmu_chip_init(sih); @@ -1278,7 +1308,7 @@ void *ai_setcore(struct si_pub *sih, uint coreid, uint coreunit) uint idx; idx = ai_findcoreidx(sih, coreid, coreunit); - if (!GOODIDX(idx)) + if (idx >= SI_MAXCORES) return NULL; return ai_setcoreidx(sih, idx); @@ -1562,7 +1592,7 @@ void ai_clkctl_init(struct si_pub *sih) struct chipcregs *cc; bool fast; - if (!CCCTL_ENAB(sih)) + if (!(sih->cccaps & CC_CAP_PWR_CTL)) return; sii = (struct si_info *)sih; @@ -1604,14 +1634,14 @@ u16 ai_clkctl_fast_pwrup_delay(struct si_pub *sih) bool fast; sii = (struct si_info *)sih; - if (PMUCTL_ENAB(sih)) { + if (sih->cccaps & CC_CAP_PMU) { INTR_OFF(sii, intr_val); fpdelay = si_pmu_fast_pwrup_delay(sih); INTR_RESTORE(sii, intr_val); return fpdelay; } - if (!CCCTL_ENAB(sih)) + if (!(sih->cccaps & CC_CAP_PWR_CTL)) return 0; fast = SI_FAST(sii); @@ -1726,7 +1756,7 @@ static bool _ai_clkctl_cc(struct si_info *sii, uint mode) goto done; } - if (!CCCTL_ENAB(&sii->pub) && (sii->pub.ccrev < 20)) + if (!(sii->pub.cccaps & CC_CAP_PWR_CTL) && (sii->pub.ccrev < 20)) goto done; switch (mode) { @@ -1746,7 +1776,7 @@ static bool _ai_clkctl_cc(struct si_info *sii, uint mode) } /* wait for the PLL */ - if (PMUCTL_ENAB(&sii->pub)) { + if (sii->pub.cccaps & CC_CAP_PMU) { u32 htavail = CCS_HTAVAIL; SPINWAIT(((R_REG(&cc->clk_ctl_st) & htavail) == 0), PMU_MAX_TRANSITION_DLY); diff --git a/drivers/staging/brcm80211/brcmsmac/aiutils.h b/drivers/staging/brcm80211/brcmsmac/aiutils.h index fcf38b8..0d4fa85 100644 --- a/drivers/staging/brcm80211/brcmsmac/aiutils.h +++ b/drivers/staging/brcm80211/brcmsmac/aiutils.h @@ -23,18 +23,6 @@ * SOC Interconnect Address Map. * All regions may not exist on all chips. */ -/* Physical SDRAM */ -#define SI_SDRAM_BASE 0x00000000 -/* Host Mode sb2pcitranslation0 (64 MB) */ -#define SI_PCI_MEM 0x08000000 -#define SI_PCI_MEM_SZ (64 * 1024 * 1024) -/* Host Mode sb2pcitranslation1 (64 MB) */ -#define SI_PCI_CFG 0x0c000000 -/* Region 2 for sdram (512 MB) */ -#define SI_SDRAM_R2 0x80000000 - -/* Wrapper space base */ -#define SI_WRAP_BASE 0x18100000 /* each core gets 4Kbytes for registers */ #define SI_CORE_SIZE 0x1000 /* @@ -44,39 +32,9 @@ */ #define SI_MAXCORES 16 -/* On-chip RAM on chips that also have DDR */ -#define SI_FASTRAM 0x19000000 -#define SI_FASTRAM_SWAPPED 0x19800000 - -/* Flash Region 2 (region 1 shadowed here) */ -#define SI_FLASH2 0x1c000000 -/* Size of Flash Region 2 */ -#define SI_FLASH2_SZ 0x02000000 -/* ARM Cortex-M3 ROM */ -#define SI_ARMCM3_ROM 0x1e000000 -/* MIPS Flash Region 1 */ -#define SI_FLASH1 0x1fc00000 -/* MIPS Size of Flash Region 1 */ -#define SI_FLASH1_SZ 0x00400000 -/* ARM7TDMI-S ROM */ -#define SI_ARM7S_ROM 0x20000000 -/* ARM Cortex-M3 SRAM Region 2 */ -#define SI_ARMCM3_SRAM2 0x60000000 -/* ARM7TDMI-S SRAM Region 2 */ -#define SI_ARM7S_SRAM2 0x80000000 -/* ARM Flash Region 1 */ -#define SI_ARM_FLASH1 0xffff0000 -/* ARM Size of Flash Region 1 */ -#define SI_ARM_FLASH1_SZ 0x00010000 - -/* Client Mode sb2pcitranslation2 (1 GB) */ -#define SI_PCI_DMA 0x40000000 -/* Client Mode sb2pcitranslation2 (1 GB) */ -#define SI_PCI_DMA2 0x80000000 /* Client Mode sb2pcitranslation2 size in bytes */ #define SI_PCI_DMA_SZ 0x40000000 -/* PCIE Client Mode sb2pcitranslation2 (2 ZettaBytes), low 32 bits */ -#define SI_PCIE_DMA_L32 0x00000000 + /* PCIE Client Mode sb2pcitranslation2 (2 ZettaBytes), high 32 bits */ #define SI_PCIE_DMA_H32 0x80000000 @@ -195,18 +153,6 @@ /* Minumum amount of flash we support */ #define FLASH_MIN 0x00020000 /* Minimum flash size */ -/* A boot/binary may have an embedded block that describes its size */ -#define BISZ_OFFSET 0x3e0 /* At this offset into the binary */ -#define BISZ_MAGIC 0x4249535a /* Marked with value: 'BISZ' */ -#define BISZ_MAGIC_IDX 0 /* Word 0: magic */ -#define BISZ_TXTST_IDX 1 /* 1: text start */ -#define BISZ_TXTEND_IDX 2 /* 2: text end */ -#define BISZ_DATAST_IDX 3 /* 3: data start */ -#define BISZ_DATAEND_IDX 4 /* 4: data end */ -#define BISZ_BSSST_IDX 5 /* 5: bss start */ -#define BISZ_BSSEND_IDX 6 /* 6: bss end */ -#define BISZ_SIZE 7 /* descriptor size in 32-bit integers */ - #define CC_SROM_OTP 0x800 /* SROM/OTP address space */ /* gpiotimerval */ @@ -216,23 +162,6 @@ #define CLKD_OTP 0x000f0000 #define CLKD_OTP_SHIFT 16 -/* When Srom support present, fields in sromcontrol */ -#define SRC_START 0x80000000 -#define SRC_BUSY 0x80000000 -#define SRC_OPCODE 0x60000000 -#define SRC_OP_READ 0x00000000 -#define SRC_OP_WRITE 0x20000000 -#define SRC_OP_WRDIS 0x40000000 -#define SRC_OP_WREN 0x60000000 -#define SRC_OTPSEL 0x00000010 -#define SRC_LOCK 0x00000008 -#define SRC_SIZE_MASK 0x00000006 -#define SRC_SIZE_1K 0x00000000 -#define SRC_SIZE_4K 0x00000002 -#define SRC_SIZE_16K 0x00000004 -#define SRC_SIZE_SHIFT 1 -#define SRC_PRESENT 0x00000001 - /* Package IDs */ #define BCM4717_PKG_ID 9 /* 4717 package id */ #define BCM4718_PKG_ID 10 /* 4718 package id */ @@ -243,38 +172,6 @@ #define BCM47162_CHIP_ID 47162 /* 47162 chipcommon chipid */ #define BCM4748_CHIP_ID 0x4748 /* 4716 chipcommon chipid (OTP, RBBU) */ -#define GOODCOREADDR(x, b) \ - (((x) >= (b)) && ((x) < ((b) + SI_MAXCORES * SI_CORE_SIZE)) && \ - IS_ALIGNED((x), SI_CORE_SIZE)) -#define GOODREGS(regs) \ - ((regs) != NULL && IS_ALIGNED((unsigned long)(regs), SI_CORE_SIZE)) -#define BADCOREADDR 0 -#define GOODIDX(idx) (((uint)idx) < SI_MAXCORES) -#define NOREV -1 /* Invalid rev */ - -/* Newer chips can access PCI/PCIE and CC core without requiring to change - * PCI BAR0 WIN - */ -#define SI_FAST(si) (((si)->pub.buscoretype == PCIE_CORE_ID) || \ - (((si)->pub.buscoretype == PCI_CORE_ID) && \ - (si)->pub.buscorerev >= 13)) - -#define PCIEREGS(si) (((char *)((si)->curmap) + PCI_16KB0_PCIREGS_OFFSET)) -#define CCREGS_FAST(si) (((char *)((si)->curmap) + PCI_16KB0_CCREGS_OFFSET)) - -/* - * Macros to disable/restore function core(D11, ENET, ILINE20, etc) interrupts - * before after core switching to avoid invalid register accesss inside ISR. - */ -#define INTR_OFF(si, intr_val) \ - if ((si)->intrsoff_fn && \ - (si)->coreid[(si)->curidx] == (si)->dev_coreid) \ - intr_val = (*(si)->intrsoff_fn)((si)->intr_arg) -#define INTR_RESTORE(si, intr_val) \ - if ((si)->intrsrestore_fn && \ - (si)->coreid[(si)->curidx] == (si)->dev_coreid) \ - (*(si)->intrsrestore_fn)((si)->intr_arg, intr_val) - /* dynamic clock control defines */ #define LPOMINFREQ 25000 /* low power oscillator min */ #define LPOMAXFREQ 43000 /* low power oscillator max */ @@ -286,55 +183,6 @@ #define ILP_DIV_5MHZ 0 /* ILP = 5 MHz */ #define ILP_DIV_1MHZ 4 /* ILP = 1 MHz */ -#define PCI(si) ((si)->pub.buscoretype == PCI_CORE_ID) -#define PCIE(si) ((si)->pub.buscoretype == PCIE_CORE_ID) -#define PCI_FORCEHT(si) \ - (PCIE(si) && (si->pub.chip == BCM4716_CHIP_ID)) - -/* GPIO Based LED powersave defines */ -#define DEFAULT_GPIO_ONTIME 10 /* Default: 10% on */ -#define DEFAULT_GPIO_OFFTIME 90 /* Default: 10% on */ - -#define DEFAULT_GPIOTIMERVAL \ - ((DEFAULT_GPIO_ONTIME << GPIO_ONTIME_SHIFT) | DEFAULT_GPIO_OFFTIME) - -/* - * Data structure to export all chip specific common variables - * public (read-only) portion of aiutils handle returned by si_attach() - */ -struct si_pub { - uint buscoretype; /* PCI_CORE_ID, PCIE_CORE_ID, PCMCIA_CORE_ID */ - uint buscorerev; /* buscore rev */ - uint buscoreidx; /* buscore index */ - int ccrev; /* chip common core rev */ - u32 cccaps; /* chip common capabilities */ - u32 cccaps_ext; /* chip common capabilities extension */ - int pmurev; /* pmu core rev */ - u32 pmucaps; /* pmu capabilities */ - uint boardtype; /* board type */ - uint boardvendor; /* board vendor */ - uint boardflags; /* board flags */ - uint boardflags2; /* board flags2 */ - uint chip; /* chip number */ - uint chiprev; /* chip revision */ - uint chippkg; /* chip package option */ - u32 chipst; /* chip status */ - bool issim; /* chip is in simulation or emulation */ - uint socirev; /* SOC interconnect rev */ - bool pci_pr32414; - -}; - -/* - * Many of the routines below take an 'sih' handle as their first arg. - * Allocate this by calling si_attach(). Free it by calling si_detach(). - * At any one time, the sih is logically focused on one particular si core - * (the "current core"). - * Use si_setcore() or si_setcoreidx() to change the association to another core - */ - -#define BADIDX (SI_MAXCORES + 1) - /* clkctl xtal what flags */ #define XTAL 0x1 /* primary crystal oscillator (2050) */ #define PLL 0x2 /* main chip pll */ @@ -367,26 +215,32 @@ struct si_pub { #define SI_PCIDOWN 2 #define SI_PCIUP 3 -/* PMU clock/power control */ -#define PMUCTL_ENAB(sih) ((sih)->cccaps & CC_CAP_PMU) - -/* chipcommon clock/power control (exclusive with PMU's) */ -#define CCCTL_ENAB(sih) ((sih)->cccaps & CC_CAP_PWR_CTL) -#define CCPLL_ENAB(sih) ((sih)->cccaps & CC_CAP_PLL_MASK) - -/* External PA enable mask */ -#define GPIO_CTRL_EPA_EN_MASK 0x40 - -#define SI_ERROR(args) - -#ifdef BCMDBG -#define SI_MSG(args) printk args -#else -#define SI_MSG(args) -#endif /* BCMDBG */ +/* + * Data structure to export all chip specific common variables + * public (read-only) portion of aiutils handle returned by si_attach() + */ +struct si_pub { + uint buscoretype; /* PCI_CORE_ID, PCIE_CORE_ID, PCMCIA_CORE_ID */ + uint buscorerev; /* buscore rev */ + uint buscoreidx; /* buscore index */ + int ccrev; /* chip common core rev */ + u32 cccaps; /* chip common capabilities */ + u32 cccaps_ext; /* chip common capabilities extension */ + int pmurev; /* pmu core rev */ + u32 pmucaps; /* pmu capabilities */ + uint boardtype; /* board type */ + uint boardvendor; /* board vendor */ + uint boardflags; /* board flags */ + uint boardflags2; /* board flags2 */ + uint chip; /* chip number */ + uint chiprev; /* chip revision */ + uint chippkg; /* chip package option */ + u32 chipst; /* chip status */ + bool issim; /* chip is in simulation or emulation */ + uint socirev; /* SOC interconnect rev */ + bool pci_pr32414; -/* Define SI_VMSG to printf for verbose debugging, but don't check it in */ -#define SI_VMSG(args) +}; struct pci_dev; @@ -436,6 +290,15 @@ struct si_info { u32 oob_router; /* oob router registers for axi */ }; +/* + * Many of the routines below take an 'sih' handle as their first arg. + * Allocate this by calling si_attach(). Free it by calling si_detach(). + * At any one time, the sih is logically focused on one particular si core + * (the "current core"). + * Use si_setcore() or si_setcoreidx() to change the association to another core + */ + + /* AMBA Interconnect exported externs */ extern uint ai_flag(struct si_pub *sih); extern void ai_setint(struct si_pub *sih, int siflag); diff --git a/drivers/staging/brcm80211/brcmsmac/main.c b/drivers/staging/brcm80211/brcmsmac/main.c index 6ded4fb..03985ca 100644 --- a/drivers/staging/brcm80211/brcmsmac/main.c +++ b/drivers/staging/brcm80211/brcmsmac/main.c @@ -168,6 +168,8 @@ #define AC_VI 2 #define AC_VO 3 +#define BCN_TMPL_LEN 512 /* length of the BCN template area */ + /* * driver maintains internal 'tick'(wlc->pub->now) which increments in 1s * OS timer(soft watchdog) it is not a wall clock and won't increment when @@ -927,7 +929,7 @@ static int brcms_b_bandtype(struct brcms_hardware *wlc_hw) /* control chip clock to save power, enable dynamic clock or force fast clock */ static void brcms_b_clkctl_clk(struct brcms_hardware *wlc_hw, uint mode) { - if (PMUCTL_ENAB(wlc_hw->sih)) { + if (wlc_hw->sih->cccaps & CC_CAP_PMU) { /* new chips with PMU, CCS_FORCEHT will distribute the HT clock * on backplane, but mac core will still run on ALP(not HT) when * it enters powersave mode, which means the FCA bit may not be @@ -1642,7 +1644,7 @@ static char *brcms_c_get_macaddr(struct brcms_hardware *wlc_hw) if (macaddr != NULL) return macaddr; - if (NBANDS_HW(wlc_hw) > 1) + if (wlc_hw->_nbands > 1) varname = "et1macaddr"; else varname = "il0macaddr"; @@ -1806,7 +1808,7 @@ void brcms_b_corereset(struct brcms_hardware *wlc_hw, u32 flags) brcms_c_mctrl_reset(wlc_hw); - if (PMUCTL_ENAB(wlc_hw->sih)) + if (wlc_hw->sih->cccaps & CC_CAP_PMU) brcms_b_clkctl_clk(wlc_hw, CLK_FAST); brcms_b_phy_reset(wlc_hw); @@ -3204,7 +3206,7 @@ static void brcms_c_bandinit_ordered(struct brcms_c_info *wlc, * We might have been bandlocked during down and the chip * power-cycled (hibernate). Figure out the right band to park on */ - if (wlc->bandlocked || NBANDS(wlc) == 1) { + if (wlc->bandlocked || wlc->pub->_nbands == 1) { /* updated in brcms_c_bandlock() */ parkband = wlc->band->bandunit; band_order[0] = band_order[1] = parkband; @@ -3218,7 +3220,7 @@ static void brcms_c_bandinit_ordered(struct brcms_c_info *wlc, } /* make each band operational, software state init */ - for (i = 0; i < NBANDS(wlc); i++) { + for (i = 0; i < wlc->pub->_nbands; i++) { uint j = band_order[i]; wlc->band = wlc->bandstate[j]; @@ -3659,7 +3661,7 @@ brcms_b_set_chanspec(struct brcms_hardware *wlc_hw, u16 chanspec, wlc_hw->chanspec = chanspec; /* Switch bands if necessary */ - if (NBANDS_HW(wlc_hw) > 1) { + if (wlc_hw->_nbands > 1) { bandunit = CHSPEC_BANDUNIT(chanspec); if (wlc_hw->band->bandunit != bandunit) { /* brcms_b_setband disables other bandunit, @@ -3729,7 +3731,7 @@ void brcms_c_set_chanspec(struct brcms_c_info *wlc, u16 chanspec) } /* Switch bands if necessary */ - if (NBANDS(wlc) > 1) { + if (wlc->pub->_nbands > 1) { bandunit = CHSPEC_BANDUNIT(chanspec); if (wlc->band->bandunit != bandunit || wlc->bandinit_pending) { switchband = true; @@ -4594,16 +4596,12 @@ static int brcms_b_attach(struct brcms_c_info *wlc, u16 vendor, u16 device, } /* initialize software state for each core and band */ - for (j = 0; j < NBANDS_HW(wlc_hw); j++) { + for (j = 0; j < wlc_hw->_nbands; j++) { /* * band0 is always 2.4Ghz * band1, if present, is 5Ghz */ - /* So if this is a single band 11a card, use band 1 */ - if (IS_SINGLEBAND_5G(wlc_hw->deviceid)) - j = BAND_5G_INDEX; - brcms_c_setxband(wlc_hw, j); wlc_hw->band->bandunit = j; @@ -4836,7 +4834,8 @@ static void brcms_c_bss_default_init(struct brcms_c_info *wlc) /* find the band of our default channel */ band = wlc->band; - if (NBANDS(wlc) > 1 && band->bandunit != CHSPEC_BANDUNIT(chanspec)) + if (wlc->pub->_nbands > 1 && + band->bandunit != CHSPEC_BANDUNIT(chanspec)) band = wlc->bandstate[OTHERBANDUNIT(wlc)]; /* init bss rates to the band specific default rate set */ @@ -4905,9 +4904,7 @@ static void brcms_c_update_mimo_band_bwcap(struct brcms_c_info *wlc, u8 bwcap) uint i; struct brcms_band *band; - for (i = 0; i < NBANDS(wlc); i++) { - if (IS_SINGLEBAND_5G(wlc->deviceid)) - i = BAND_5G_INDEX; + for (i = 0; i < wlc->pub->_nbands; i++) { band = wlc->bandstate[i]; if (band->bandtype == BRCM_BAND_5G) { if ((bwcap == BRCMS_N_BW_40ALL) @@ -5016,11 +5013,7 @@ brcms_c_attach(struct brcms_info *wl, u16 vendor, u16 device, uint unit, memcpy(&pub->cur_etheraddr, &wlc->perm_etheraddr, ETH_ALEN); - for (j = 0; j < NBANDS(wlc); j++) { - /* Use band 1 for single band 11a */ - if (IS_SINGLEBAND_5G(wlc->deviceid)) - j = BAND_5G_INDEX; - + for (j = 0; j < wlc->pub->_nbands; j++) { wlc->band = wlc->bandstate[j]; if (!brcms_c_attach_stf_ant_init(wlc)) { @@ -5233,7 +5226,7 @@ static int brcms_b_detach(struct brcms_c_info *wlc) brcms_b_detach_dmapio(wlc_hw); band = wlc_hw->band; - for (i = 0; i < NBANDS_HW(wlc_hw); i++) { + for (i = 0; i < wlc_hw->_nbands; i++) { if (band->pi) { /* Detach this band's phy */ wlc_phy_detach(band->pi); @@ -5780,7 +5773,7 @@ int brcms_c_set_gmode(struct brcms_c_info *wlc, u8 gmode, bool config) /* verify that we are dealing with 2G band and grab the band pointer */ if (wlc->band->bandtype == BRCM_BAND_2G) band = wlc->band; - else if ((NBANDS(wlc) > 1) && + else if ((wlc->pub->_nbands > 1) && (wlc->bandstate[OTHERBANDUNIT(wlc)]->bandtype == BRCM_BAND_2G)) band = wlc->bandstate[OTHERBANDUNIT(wlc)]; else @@ -5942,7 +5935,7 @@ int brcms_c_set_nmode(struct brcms_c_info *wlc, s32 nmode) wlc->default_bss->flags &= ~BRCMS_BSS_HT; /* delete the mcs rates from the default and hw ratesets */ brcms_c_rateset_mcs_clear(&wlc->default_bss->rateset); - for (i = 0; i < NBANDS(wlc); i++) { + for (i = 0; i < wlc->pub->_nbands; i++) { memset(wlc->bandstate[i]->hw_rateset.mcs, 0, MCSSET_LEN); if (IS_MCS(wlc->band->rspec_override)) { @@ -5971,7 +5964,7 @@ int brcms_c_set_nmode(struct brcms_c_info *wlc, s32 nmode) /* add the mcs rates to the default and hw ratesets */ brcms_c_rateset_mcs_build(&wlc->default_bss->rateset, wlc->stf->txstreams); - for (i = 0; i < NBANDS(wlc); i++) + for (i = 0; i < wlc->pub->_nbands; i++) memcpy(wlc->bandstate[i]->hw_rateset.mcs, wlc->default_bss->rateset.mcs, MCSSET_LEN); break; @@ -8886,7 +8879,7 @@ bool brcms_c_valid_rate(struct brcms_c_info *wlc, u32 rspec, int band, if ((band == BRCM_BAND_AUTO) || (band == wlc->band->bandtype)) hw_rateset = &wlc->band->hw_rateset; - else if (NBANDS(wlc) > 1) + else if (wlc->pub->_nbands > 1) hw_rateset = &wlc->bandstate[OTHERBANDUNIT(wlc)]->hw_rateset; else /* other band specified and we are a single band device */ diff --git a/drivers/staging/brcm80211/brcmsmac/pmu.c b/drivers/staging/brcm80211/brcmsmac/pmu.c index cdeaa4e..61ba373 100644 --- a/drivers/staging/brcm80211/brcmsmac/pmu.c +++ b/drivers/staging/brcm80211/brcmsmac/pmu.c @@ -206,7 +206,7 @@ u32 si_pmu_ilp_clock(struct si_pub *sih) { static u32 ilpcycles_per_sec; - if (!PMUCTL_ENAB(sih)) + if (!(sih->cccaps & CC_CAP_PMU)) return ILP_CLOCK; if (ilpcycles_per_sec == 0) { @@ -297,7 +297,7 @@ u32 si_pmu_alp_clock(struct si_pub *sih) u32 clock = ALP_CLOCK; /* bail out with default */ - if (!PMUCTL_ENAB(sih)) + if (!(sih->cccaps & CC_CAP_PMU)) return clock; switch (sih->chip) { -- 1.7.4.1