All of lore.kernel.org
 help / color / mirror / Atom feed
From: Kevin Wolf <kwolf@redhat.com>
To: anthony@codemonkey.ws
Cc: kwolf@redhat.com, qemu-devel@nongnu.org
Subject: [Qemu-devel] [PATCH 22/35] block: Clean up remaining users of "removable"
Date: Mon, 12 Sep 2011 16:19:21 +0200	[thread overview]
Message-ID: <1315837174-15327-23-git-send-email-kwolf@redhat.com> (raw)
In-Reply-To: <1315837174-15327-1-git-send-email-kwolf@redhat.com>

From: Markus Armbruster <armbru@redhat.com>

BlockDriverState member removable is a confused mess.  It is true when
an ide-cd, scsi-cd or floppy qdev is attached, or when the
BlockDriverState was created with -drive if={floppy,sd} or -drive
if={ide,scsi,xen,none},media=cdrom ("created removable"), except when
an ide-hd, scsi-hd, scsi-generic or virtio-blk qdev is attached.

Three users remain:

1. eject_device(), via bdrv_is_removable() uses it to determine
   whether a block device can eject media.

2. bdrv_info() is monitor command "info block".  QMP documentation
   says "true if the device is removable, false otherwise".  From the
   monitor user's point of view, the only sensible interpretation of
   "is removable" is "can eject media with monitor commands eject and
   change".

A block device can eject media unless a device is attached that
doesn't support it.  Switch the two users over to new
bdrv_dev_has_removable_media() that returns exactly that.

3. bdrv_getlength() uses to suppress its length cache when media can
   change (see commit 46a4e4e6).  Media change is either monitor
   command change (updates the length cache), monitor command eject
   (doesn't update the length cache, easily fixable), or physical
   media change (invalidates length cache, not so easily fixable).

I'm refraining from improving anything here, because this series is
long enough already.  Instead, I simply switch it over to
bdrv_dev_has_removable_media() as well.

This changes the behavior of the length cache and of monitor commands
eject and change in two cases:

a. drive not created removable, no device attached

   The commit makes the drive removable, and defeats the length cache.

   Example: -drive if=none

b. drive created removable, but the attached drive is non-removable,
   and doesn't call bdrv_set_removable(..., 0) (most devices don't)

   The commit makes the drive non-removable, and enables the length
   cache.

   Example: -drive if=xen,media=cdrom -M xenpv

   The other non-removable devices that don't call
   bdrv_set_removable() can't currently use a drive created removable,
   either because they aren't qdevified, or because they lack a drive
   property.  Won't stay that way.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
---
 block.c        |   18 +++++++++++-------
 block.h        |    3 ++-
 blockdev.c     |    2 +-
 hw/scsi-disk.c |    5 +++++
 4 files changed, 19 insertions(+), 9 deletions(-)

diff --git a/block.c b/block.c
index 7225b15..fee45bf 100644
--- a/block.c
+++ b/block.c
@@ -802,6 +802,9 @@ void bdrv_set_dev_ops(BlockDriverState *bs, const BlockDevOps *ops,
 {
     bs->dev_ops = ops;
     bs->dev_opaque = opaque;
+    if (bdrv_dev_has_removable_media(bs) && bs == bs_snapshots) {
+        bs_snapshots = NULL;
+    }
 }
 
 static void bdrv_dev_change_media_cb(BlockDriverState *bs)
@@ -811,6 +814,11 @@ static void bdrv_dev_change_media_cb(BlockDriverState *bs)
     }
 }
 
+bool bdrv_dev_has_removable_media(BlockDriverState *bs)
+{
+    return !bs->dev || (bs->dev_ops && bs->dev_ops->change_media_cb);
+}
+
 static void bdrv_dev_resize_cb(BlockDriverState *bs)
 {
     if (bs->dev_ops && bs->dev_ops->resize_cb) {
@@ -1329,7 +1337,7 @@ int64_t bdrv_getlength(BlockDriverState *bs)
     if (!drv)
         return -ENOMEDIUM;
 
-    if (bs->growable || bs->removable) {
+    if (bs->growable || bdrv_dev_has_removable_media(bs)) {
         if (drv->bdrv_getlength) {
             return drv->bdrv_getlength(bs);
         }
@@ -1614,11 +1622,6 @@ void bdrv_set_removable(BlockDriverState *bs, int removable)
     }
 }
 
-int bdrv_is_removable(BlockDriverState *bs)
-{
-    return bs->removable;
-}
-
 int bdrv_is_read_only(BlockDriverState *bs)
 {
     return bs->read_only;
@@ -1897,7 +1900,8 @@ void bdrv_info(Monitor *mon, QObject **ret_data)
 
         bs_obj = qobject_from_jsonf("{ 'device': %s, 'type': 'unknown', "
                                     "'removable': %i, 'locked': %i }",
-                                    bs->device_name, bs->removable,
+                                    bs->device_name,
+                                    bdrv_dev_has_removable_media(bs),
                                     bdrv_dev_is_medium_locked(bs));
 
         if (bs->drv) {
diff --git a/block.h b/block.h
index 4691090..860e30d 100644
--- a/block.h
+++ b/block.h
@@ -34,6 +34,7 @@ typedef struct BlockDevOps {
      * Runs when virtual media changed (monitor commands eject, change)
      * Beware: doesn't run when a host device's physical media
      * changes.  Sure would be useful if it did.
+     * Device models with removable media must implement this callback.
      */
     void (*change_media_cb)(void *opaque);
     /*
@@ -99,6 +100,7 @@ void bdrv_detach_dev(BlockDriverState *bs, void *dev);
 void *bdrv_get_attached_dev(BlockDriverState *bs);
 void bdrv_set_dev_ops(BlockDriverState *bs, const BlockDevOps *ops,
                       void *opaque);
+bool bdrv_dev_has_removable_media(BlockDriverState *bs);
 bool bdrv_dev_is_medium_locked(BlockDriverState *bs);
 int bdrv_read(BlockDriverState *bs, int64_t sector_num,
               uint8_t *buf, int nb_sectors);
@@ -206,7 +208,6 @@ void bdrv_set_on_error(BlockDriverState *bs, BlockErrorAction on_read_error,
                        BlockErrorAction on_write_error);
 BlockErrorAction bdrv_get_on_error(BlockDriverState *bs, int is_read);
 void bdrv_set_removable(BlockDriverState *bs, int removable);
-int bdrv_is_removable(BlockDriverState *bs);
 int bdrv_is_read_only(BlockDriverState *bs);
 int bdrv_is_sg(BlockDriverState *bs);
 int bdrv_enable_write_cache(BlockDriverState *bs);
diff --git a/blockdev.c b/blockdev.c
index 3f00b2e..ddf1f8f 100644
--- a/blockdev.c
+++ b/blockdev.c
@@ -636,7 +636,7 @@ out:
 
 static int eject_device(Monitor *mon, BlockDriverState *bs, int force)
 {
-    if (!bdrv_is_removable(bs)) {
+    if (!bdrv_dev_has_removable_media(bs)) {
         qerror_report(QERR_DEVICE_NOT_REMOVABLE, bdrv_get_device_name(bs));
         return -1;
     }
diff --git a/hw/scsi-disk.c b/hw/scsi-disk.c
index 1a49217..d6e838c 100644
--- a/hw/scsi-disk.c
+++ b/hw/scsi-disk.c
@@ -1172,12 +1172,17 @@ static void scsi_destroy(SCSIDevice *dev)
     blockdev_mark_auto_del(s->qdev.conf.bs);
 }
 
+static void scsi_cd_change_media_cb(void *opaque)
+{
+}
+
 static bool scsi_cd_is_medium_locked(void *opaque)
 {
     return ((SCSIDiskState *)opaque)->tray_locked;
 }
 
 static const BlockDevOps scsi_cd_block_ops = {
+    .change_media_cb = scsi_cd_change_media_cb,
     .is_medium_locked = scsi_cd_is_medium_locked,
 };
 
-- 
1.7.6

  parent reply	other threads:[~2011-09-12 14:17 UTC|newest]

Thread overview: 37+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2011-09-12 14:18 [Qemu-devel] [PULL 00/35] Block patches Kevin Wolf
2011-09-12 14:19 ` [Qemu-devel] [PATCH 01/35] qcow2: removed unused depends_on field Kevin Wolf
2011-09-12 14:19 ` [Qemu-devel] [PATCH 02/35] ide: Fix ATA command READ to set ATAPI signature for CD-ROM Kevin Wolf
2011-09-12 14:19 ` [Qemu-devel] [PATCH 03/35] ide: Use a table to declare which drive kinds accept each command Kevin Wolf
2011-09-12 14:19 ` [Qemu-devel] [PATCH 04/35] ide: Reject ATA commands specific to drive kinds Kevin Wolf
2011-09-12 14:19 ` [Qemu-devel] [PATCH 05/35] ide/atapi: Clean up misleading name in cmd_start_stop_unit() Kevin Wolf
2011-09-12 14:19 ` [Qemu-devel] [PATCH 06/35] ide/atapi: Track tray open/close state Kevin Wolf
2011-09-12 14:19 ` [Qemu-devel] [PATCH 07/35] scsi-disk: Factor out scsi_disk_emulate_start_stop() Kevin Wolf
2011-09-12 14:19 ` [Qemu-devel] [PATCH 08/35] scsi-disk: Track tray open/close state Kevin Wolf
2011-09-12 14:19 ` [Qemu-devel] [PATCH 09/35] block: Revert entanglement of bdrv_is_inserted() with tray status Kevin Wolf
2011-09-12 14:19 ` [Qemu-devel] [PATCH 10/35] block: Drop tray status tracking, no longer used Kevin Wolf
2011-09-12 14:19 ` [Qemu-devel] [PATCH 11/35] ide/atapi: Track tray locked state Kevin Wolf
2011-09-12 14:19 ` [Qemu-devel] [PATCH 12/35] scsi-disk: " Kevin Wolf
2011-09-12 14:19 ` [Qemu-devel] [PATCH 13/35] block: Leave enforcing tray lock to device models Kevin Wolf
2011-09-12 14:19 ` [Qemu-devel] [PATCH 14/35] block: Drop medium lock tracking, ask device models instead Kevin Wolf
2011-09-12 14:19 ` [Qemu-devel] [PATCH 15/35] block: Rename bdrv_set_locked() to bdrv_lock_medium() Kevin Wolf
2011-09-12 14:19 ` [Qemu-devel] [PATCH 16/35] rbd: allow client id to be specified in config string Kevin Wolf
2011-09-12 14:19 ` [Qemu-devel] [PATCH 17/35] rbd: clean up, fix style Kevin Wolf
2011-09-12 14:19 ` [Qemu-devel] [PATCH 18/35] rbd: fix leak in qemu_rbd_open failure paths Kevin Wolf
2011-09-12 14:19 ` [Qemu-devel] [PATCH 19/35] ide/atapi: Don't fail eject when tray is already open Kevin Wolf
2011-09-12 14:19 ` [Qemu-devel] [PATCH 20/35] scsi-disk: Fix START_STOP to fail when it can't eject Kevin Wolf
2011-09-12 14:19 ` [Qemu-devel] [PATCH 21/35] ide/atapi: Preserve tray state on migration Kevin Wolf
2011-09-12 14:19 ` Kevin Wolf [this message]
2011-09-12 14:19 ` [Qemu-devel] [PATCH 23/35] block: Drop BlockDriverState member removable Kevin Wolf
2011-09-12 14:19 ` [Qemu-devel] [PATCH 24/35] block: Show whether the virtual tray is open in info block Kevin Wolf
2011-09-12 14:19 ` [Qemu-devel] [PATCH 25/35] block: Move BlockConf & friends from block_int.h to block.h Kevin Wolf
2011-09-12 14:19 ` [Qemu-devel] [PATCH 26/35] hw: Trim superfluous #include "block_int.h" Kevin Wolf
2011-09-12 14:19 ` [Qemu-devel] [PATCH 27/35] block: New bdrv_set_buffer_alignment() Kevin Wolf
2011-09-12 14:19 ` [Qemu-devel] [PATCH 28/35] block: Reset buffer alignment on detach Kevin Wolf
2011-09-12 14:19 ` [Qemu-devel] [PATCH 29/35] nbd: Clean up use of block_int.h Kevin Wolf
2011-09-12 14:19 ` [Qemu-devel] [PATCH 30/35] block: New change_media_cb() parameter load Kevin Wolf
2011-09-12 14:19 ` [Qemu-devel] [PATCH 31/35] ide/atapi scsi-disk: Make monitor eject -f, then change work Kevin Wolf
2011-09-12 14:19 ` [Qemu-devel] [PATCH 32/35] qcow2: initialize metadata before inserting in cluster_allocs Kevin Wolf
2011-09-12 14:19 ` [Qemu-devel] [PATCH 33/35] ahci: Remove unused struct member Kevin Wolf
2011-09-12 14:19 ` [Qemu-devel] [PATCH 34/35] qcow2: align cluster_data to block to improve performance using O_DIRECT Kevin Wolf
2011-09-12 14:19 ` [Qemu-devel] [PATCH 35/35] qcow2: fix range check Kevin Wolf
2011-09-15 19:09 ` [Qemu-devel] [PULL 00/35] Block patches Anthony Liguori

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1315837174-15327-23-git-send-email-kwolf@redhat.com \
    --to=kwolf@redhat.com \
    --cc=anthony@codemonkey.ws \
    --cc=qemu-devel@nongnu.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.