From: Seungwon Jeon <tgih.jun@samsung.com>
To: linux-mmc@vger.kernel.org
Cc: Chris Ball <cjb@laptop.org>,
linux-samsung-soc@vger.kernel.org, kgene.kim@samsung.com,
dh.han@samsung.com, Seungwon Jeon <tgih.jun@samsung.com>
Subject: [PATCH v4] mmc: core: Add default timeout value for CMD6.
Date: Thu, 22 Sep 2011 11:12:21 +0900 [thread overview]
Message-ID: <1316657541-9221-1-git-send-email-tgih.jun@samsung.com> (raw)
EXT_CSD[248] includes the default maximum timeout for CMD6.
This field is added at eMMC4.5 Spec. And it can be used for default
timeout except for some operations which don't define the timeout(i.e.
background operation, sanitize, flush cache) in eMMC4.5 Spec.
Signed-off-by: Seungwon Jeon <tgih.jun@samsung.com>
---
drivers/mmc/core/mmc.c | 16 ++++++++++++----
include/linux/mmc/card.h | 1 +
include/linux/mmc/mmc.h | 1 +
3 files changed, 14 insertions(+), 4 deletions(-)
diff --git a/drivers/mmc/core/mmc.c b/drivers/mmc/core/mmc.c
index 5700b1c..b2ee14a 100644
--- a/drivers/mmc/core/mmc.c
+++ b/drivers/mmc/core/mmc.c
@@ -410,6 +410,12 @@ static int mmc_read_ext_csd(struct mmc_card *card, u8 *ext_csd)
else
card->erased_byte = 0x0;
+ if (card->ext_csd.rev >= 6)
+ card->ext_csd.generic_cmd6_time = 10 *
+ ext_csd[EXT_CSD_GENERIC_CMD6_TIME];
+ else
+ card->ext_csd.generic_cmd6_time = 0;
+
out:
return err;
}
@@ -668,7 +674,8 @@ static int mmc_init_card(struct mmc_host *host, u32 ocr,
*/
if (card->ext_csd.enhanced_area_en) {
err = mmc_switch(card, EXT_CSD_CMD_SET_NORMAL,
- EXT_CSD_ERASE_GROUP_DEF, 1, 0);
+ EXT_CSD_ERASE_GROUP_DEF, 1,
+ card->ext_csd.generic_cmd6_time);
if (err && err != -EBADMSG)
goto free_card;
@@ -711,7 +718,8 @@ static int mmc_init_card(struct mmc_host *host, u32 ocr,
if ((card->ext_csd.hs_max_dtr != 0) &&
(host->caps & MMC_CAP_MMC_HIGHSPEED)) {
err = mmc_switch(card, EXT_CSD_CMD_SET_NORMAL,
- EXT_CSD_HS_TIMING, 1, 0);
+ EXT_CSD_HS_TIMING, 1,
+ card->ext_csd.generic_cmd6_time);
if (err && err != -EBADMSG)
goto free_card;
@@ -783,7 +791,7 @@ static int mmc_init_card(struct mmc_host *host, u32 ocr,
err = mmc_switch(card, EXT_CSD_CMD_SET_NORMAL,
EXT_CSD_BUS_WIDTH,
ext_csd_bits[idx][0],
- 0);
+ card->ext_csd.generic_cmd6_time);
if (!err) {
mmc_set_bus_width(card->host, bus_width);
@@ -806,7 +814,7 @@ static int mmc_init_card(struct mmc_host *host, u32 ocr,
err = mmc_switch(card, EXT_CSD_CMD_SET_NORMAL,
EXT_CSD_BUS_WIDTH,
ext_csd_bits[idx][1],
- 0);
+ card->ext_csd.generic_cmd6_time);
}
if (err) {
printk(KERN_WARNING "%s: switch to bus width %d ddr %d "
diff --git a/include/linux/mmc/card.h b/include/linux/mmc/card.h
index b460fc2..b713abf 100644
--- a/include/linux/mmc/card.h
+++ b/include/linux/mmc/card.h
@@ -52,6 +52,7 @@ struct mmc_ext_csd {
u8 part_config;
unsigned int part_time; /* Units: ms */
unsigned int sa_timeout; /* Units: 100ns */
+ unsigned int generic_cmd6_time; /* Units: 10ms */
unsigned int hs_max_dtr;
unsigned int sectors;
unsigned int card_type;
diff --git a/include/linux/mmc/mmc.h b/include/linux/mmc/mmc.h
index 5a794cb..e869f00 100644
--- a/include/linux/mmc/mmc.h
+++ b/include/linux/mmc/mmc.h
@@ -293,6 +293,7 @@ struct _mmc_csd {
#define EXT_CSD_SEC_ERASE_MULT 230 /* RO */
#define EXT_CSD_SEC_FEATURE_SUPPORT 231 /* RO */
#define EXT_CSD_TRIM_MULT 232 /* RO */
+#define EXT_CSD_GENERIC_CMD6_TIME 248 /* RO */
/*
* EXT_CSD field definitions
--
1.7.0.4
next reply other threads:[~2011-09-22 2:12 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2011-09-22 2:12 Seungwon Jeon [this message]
2011-09-22 22:11 ` [PATCH v4] mmc: core: Add default timeout value for CMD6 J Freyensee
2011-09-23 0:58 ` Seungwon Jeon
2011-10-04 13:11 ` Adrian Hunter
2011-10-05 9:25 ` Seungwon Jeon
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1316657541-9221-1-git-send-email-tgih.jun@samsung.com \
--to=tgih.jun@samsung.com \
--cc=cjb@laptop.org \
--cc=dh.han@samsung.com \
--cc=kgene.kim@samsung.com \
--cc=linux-mmc@vger.kernel.org \
--cc=linux-samsung-soc@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.