From mboxrd@z Thu Jan 1 00:00:00 1970 From: Mark Brown Subject: [PATCH 2/4] ASoC: Remove I2C ifdefs from wm8961 driver Date: Sat, 17 Dec 2011 09:39:14 +0000 Message-ID: <1324114756-24254-2-git-send-email-broonie@opensource.wolfsonmicro.com> References: <1324114756-24254-1-git-send-email-broonie@opensource.wolfsonmicro.com> Mime-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit Return-path: Received: from opensource.wolfsonmicro.com (opensource.wolfsonmicro.com [80.75.67.52]) by alsa0.perex.cz (Postfix) with ESMTP id 97089244B8 for ; Sat, 17 Dec 2011 10:39:19 +0100 (CET) In-Reply-To: <1324114756-24254-1-git-send-email-broonie@opensource.wolfsonmicro.com> List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Sender: alsa-devel-bounces@alsa-project.org Errors-To: alsa-devel-bounces@alsa-project.org To: Liam Girdwood Cc: alsa-devel@alsa-project.org, patches@opensource.wolfsonmicro.com, Mark Brown List-Id: alsa-devel@alsa-project.org The driver only supports I2C so no need to conditionalise its use. Signed-off-by: Mark Brown --- sound/soc/codecs/wm8961.c | 6 ------ 1 files changed, 0 insertions(+), 6 deletions(-) diff --git a/sound/soc/codecs/wm8961.c b/sound/soc/codecs/wm8961.c index 58fbf0a..13a0850 100644 --- a/sound/soc/codecs/wm8961.c +++ b/sound/soc/codecs/wm8961.c @@ -1081,7 +1081,6 @@ static struct snd_soc_codec_driver soc_codec_dev_wm8961 = { .volatile_register = wm8961_volatile_register, }; -#if defined(CONFIG_I2C) || defined(CONFIG_I2C_MODULE) static __devinit int wm8961_i2c_probe(struct i2c_client *i2c, const struct i2c_device_id *id) { @@ -1123,27 +1122,22 @@ static struct i2c_driver wm8961_i2c_driver = { .remove = __devexit_p(wm8961_i2c_remove), .id_table = wm8961_i2c_id, }; -#endif static int __init wm8961_modinit(void) { int ret = 0; -#if defined(CONFIG_I2C) || defined(CONFIG_I2C_MODULE) ret = i2c_add_driver(&wm8961_i2c_driver); if (ret != 0) { printk(KERN_ERR "Failed to register wm8961 I2C driver: %d\n", ret); } -#endif return ret; } module_init(wm8961_modinit); static void __exit wm8961_exit(void) { -#if defined(CONFIG_I2C) || defined(CONFIG_I2C_MODULE) i2c_del_driver(&wm8961_i2c_driver); -#endif } module_exit(wm8961_exit); -- 1.7.7.3