All of lore.kernel.org
 help / color / mirror / Atom feed
From: Daniel Mack <zonque@gmail.com>
To: alsa-devel@alsa-project.org
Cc: gdiffey@gmail.com, tiwai@suse.de, clemens@ladisch.de,
	linuxaudio@showlabor.de, Daniel Mack <zonque@gmail.com>,
	blablack@gmail.com
Subject: [PATCH 4/5] ALSA: snd-usb: remove old streaming logic
Date: Wed, 21 Dec 2011 00:34:47 +0100	[thread overview]
Message-ID: <1324424088-5705-5-git-send-email-zonque@gmail.com> (raw)
In-Reply-To: <1324424088-5705-1-git-send-email-zonque@gmail.com>

Signed-off-by: Daniel Mack <zonque@gmail.com>
---
 sound/usb/endpoint.c |  851 +-------------------------------------------------
 sound/usb/endpoint.h |   15 -
 2 files changed, 8 insertions(+), 858 deletions(-)

diff --git a/sound/usb/endpoint.c b/sound/usb/endpoint.c
index d093b38..147e57f 100644
--- a/sound/usb/endpoint.c
+++ b/sound/usb/endpoint.c
@@ -53,727 +53,19 @@ static inline unsigned get_usb_high_speed_rate(unsigned int rate)
 }
 
 /*
- * unlink active urbs.
- */
-static int deactivate_urbs_old(struct snd_usb_substream *subs, int force, int can_sleep)
-{
-	struct snd_usb_audio *chip = subs->stream->chip;
-	unsigned int i;
-	int async;
-
-	subs->running = 0;
-
-	if (!force && subs->stream->chip->shutdown) /* to be sure... */
-		return -EBADFD;
-
-	async = !can_sleep && chip->async_unlink;
-
-	if (!async && in_interrupt())
-		return 0;
-
-	for (i = 0; i < subs->nurbs; i++) {
-		if (test_bit(i, &subs->active_mask)) {
-			if (!test_and_set_bit(i, &subs->unlink_mask)) {
-				struct urb *u = subs->dataurb[i].urb;
-				if (async)
-					usb_unlink_urb(u);
-				else
-					usb_kill_urb(u);
-			}
-		}
-	}
-	if (subs->syncpipe) {
-		for (i = 0; i < SYNC_URBS; i++) {
-			if (test_bit(i+16, &subs->active_mask)) {
-				if (!test_and_set_bit(i+16, &subs->unlink_mask)) {
-					struct urb *u = subs->syncurb[i].urb;
-					if (async)
-						usb_unlink_urb(u);
-					else
-						usb_kill_urb(u);
-				}
-			}
-		}
-	}
-	return 0;
-}
-
-
-/*
  * release a urb data
  */
 static void release_urb_ctx(struct snd_urb_ctx *u)
 {
-	if (u->urb) {
-		if (u->buffer_size)
-			usb_free_coherent(u->subs->dev, u->buffer_size,
-					u->urb->transfer_buffer,
-					u->urb->transfer_dma);
-		usb_free_urb(u->urb);
-		u->urb = NULL;
-	}
-}
-
-/*
- *  wait until all urbs are processed.
- */
-static int wait_clear_urbs_old(struct snd_usb_substream *subs)
-{
-	unsigned long end_time = jiffies + msecs_to_jiffies(1000);
-	unsigned int i;
-	int alive;
-
-	do {
-		alive = 0;
-		for (i = 0; i < subs->nurbs; i++) {
-			if (test_bit(i, &subs->active_mask))
-				alive++;
-		}
-		if (subs->syncpipe) {
-			for (i = 0; i < SYNC_URBS; i++) {
-				if (test_bit(i + 16, &subs->active_mask))
-					alive++;
-			}
-		}
-		if (! alive)
-			break;
-		schedule_timeout_uninterruptible(1);
-	} while (time_before(jiffies, end_time));
-	if (alive)
-		snd_printk(KERN_ERR "timeout: still %d active urbs..\n", alive);
-	return 0;
-}
-
-/*
- * release a substream
- */
-void snd_usb_release_substream_urbs(struct snd_usb_substream *subs, int force)
-{
-	int i;
-
-	/* stop urbs (to be sure) */
-	deactivate_urbs_old(subs, force, 1);
-	wait_clear_urbs_old(subs);
-
-	for (i = 0; i < MAX_URBS; i++)
-		release_urb_ctx(&subs->dataurb[i]);
-	for (i = 0; i < SYNC_URBS; i++)
-		release_urb_ctx(&subs->syncurb[i]);
-	usb_free_coherent(subs->dev, SYNC_URBS * 4,
-			subs->syncbuf, subs->sync_dma);
-	subs->syncbuf = NULL;
-	subs->nurbs = 0;
-}
-
-/*
- * complete callback from data urb
- */
-static void snd_complete_urb_old(struct urb *urb)
-{
-	struct snd_urb_ctx *ctx = urb->context;
-	struct snd_usb_substream *subs = ctx->subs;
-	struct snd_pcm_substream *substream = ctx->subs->pcm_substream;
-	int err = 0;
-
-	if ((subs->running && subs->ops.retire(subs, substream->runtime, urb)) ||
-	    !subs->running || /* can be stopped during retire callback */
-	    (err = subs->ops.prepare(subs, substream->runtime, urb)) < 0 ||
-	    (err = usb_submit_urb(urb, GFP_ATOMIC)) < 0) {
-		clear_bit(ctx->index, &subs->active_mask);
-		if (err < 0) {
-			snd_printd(KERN_ERR "cannot submit urb (err = %d)\n", err);
-			snd_pcm_stop(substream, SNDRV_PCM_STATE_XRUN);
-		}
-	}
-}
-
-
-/*
- * complete callback from sync urb
- */
-static void snd_complete_sync_urb(struct urb *urb)
-{
-	struct snd_urb_ctx *ctx = urb->context;
-	struct snd_usb_substream *subs = ctx->subs;
-	struct snd_pcm_substream *substream = ctx->subs->pcm_substream;
-	int err = 0;
-
-	if ((subs->running && subs->ops.retire_sync(subs, substream->runtime, urb)) ||
-	    !subs->running || /* can be stopped during retire callback */
-	    (err = subs->ops.prepare_sync(subs, substream->runtime, urb)) < 0 ||
-	    (err = usb_submit_urb(urb, GFP_ATOMIC)) < 0) {
-		clear_bit(ctx->index + 16, &subs->active_mask);
-		if (err < 0) {
-			snd_printd(KERN_ERR "cannot submit sync urb (err = %d)\n", err);
-			snd_pcm_stop(substream, SNDRV_PCM_STATE_XRUN);
-		}
-	}
-}
-
-
-/*
- * initialize a substream for plaback/capture
- */
-int snd_usb_init_substream_urbs(struct snd_usb_substream *subs,
-				unsigned int period_bytes,
-				unsigned int rate,
-				unsigned int frame_bits)
-{
-	unsigned int maxsize, i;
-	int is_playback = subs->direction == SNDRV_PCM_STREAM_PLAYBACK;
-	unsigned int urb_packs, total_packs, packs_per_ms;
-	struct snd_usb_audio *chip = subs->stream->chip;
-
-	/* calculate the frequency in 16.16 format */
-	if (snd_usb_get_speed(subs->dev) == USB_SPEED_FULL)
-		subs->freqn = get_usb_full_speed_rate(rate);
-	else
-		subs->freqn = get_usb_high_speed_rate(rate);
-	subs->freqm = subs->freqn;
-	subs->freqshift = INT_MIN;
-	/* calculate max. frequency */
-	if (subs->maxpacksize) {
-		/* whatever fits into a max. size packet */
-		maxsize = subs->maxpacksize;
-		subs->freqmax = (maxsize / (frame_bits >> 3))
-				<< (16 - subs->datainterval);
-	} else {
-		/* no max. packet size: just take 25% higher than nominal */
-		subs->freqmax = subs->freqn + (subs->freqn >> 2);
-		maxsize = ((subs->freqmax + 0xffff) * (frame_bits >> 3))
-				>> (16 - subs->datainterval);
-	}
-	subs->phase = 0;
-
-	if (subs->fill_max)
-		subs->curpacksize = subs->maxpacksize;
-	else
-		subs->curpacksize = maxsize;
-
-	if (snd_usb_get_speed(subs->dev) != USB_SPEED_FULL)
-		packs_per_ms = 8 >> subs->datainterval;
-	else
-		packs_per_ms = 1;
-
-	if (is_playback) {
-		urb_packs = max(chip->nrpacks, 1);
-		urb_packs = min(urb_packs, (unsigned int)MAX_PACKS);
-	} else
-		urb_packs = 1;
-	urb_packs *= packs_per_ms;
-	if (subs->syncpipe)
-		urb_packs = min(urb_packs, 1U << subs->syncinterval);
-
-	/* decide how many packets to be used */
-	if (is_playback) {
-		unsigned int minsize, maxpacks;
-		/* determine how small a packet can be */
-		minsize = (subs->freqn >> (16 - subs->datainterval))
-			  * (frame_bits >> 3);
-		/* with sync from device, assume it can be 12% lower */
-		if (subs->syncpipe)
-			minsize -= minsize >> 3;
-		minsize = max(minsize, 1u);
-		total_packs = (period_bytes + minsize - 1) / minsize;
-		/* we need at least two URBs for queueing */
-		if (total_packs < 2) {
-			total_packs = 2;
-		} else {
-			/* and we don't want too long a queue either */
-			maxpacks = max(MAX_QUEUE * packs_per_ms, urb_packs * 2);
-			total_packs = min(total_packs, maxpacks);
-		}
-	} else {
-		while (urb_packs > 1 && urb_packs * maxsize >= period_bytes)
-			urb_packs >>= 1;
-		total_packs = MAX_URBS * urb_packs;
-	}
-	subs->nurbs = (total_packs + urb_packs - 1) / urb_packs;
-	if (subs->nurbs > MAX_URBS) {
-		/* too much... */
-		subs->nurbs = MAX_URBS;
-		total_packs = MAX_URBS * urb_packs;
-	} else if (subs->nurbs < 2) {
-		/* too little - we need at least two packets
-		 * to ensure contiguous playback/capture
-		 */
-		subs->nurbs = 2;
-	}
-
-	/* allocate and initialize data urbs */
-	for (i = 0; i < subs->nurbs; i++) {
-		struct snd_urb_ctx *u = &subs->dataurb[i];
-		u->index = i;
-		u->subs = subs;
-		u->packets = (i + 1) * total_packs / subs->nurbs
-			- i * total_packs / subs->nurbs;
-		u->buffer_size = maxsize * u->packets;
-		if (subs->fmt_type == UAC_FORMAT_TYPE_II)
-			u->packets++; /* for transfer delimiter */
-		u->urb = usb_alloc_urb(u->packets, GFP_KERNEL);
-		if (!u->urb)
-			goto out_of_memory;
-		u->urb->transfer_buffer =
-			usb_alloc_coherent(subs->dev, u->buffer_size,
-					   GFP_KERNEL, &u->urb->transfer_dma);
-		if (!u->urb->transfer_buffer)
-			goto out_of_memory;
-		u->urb->pipe = subs->datapipe;
-		u->urb->transfer_flags = URB_ISO_ASAP | URB_NO_TRANSFER_DMA_MAP;
-		u->urb->interval = 1 << subs->datainterval;
-		u->urb->context = u;
-		u->urb->complete = snd_complete_urb_old;
-	}
-
-	if (subs->syncpipe) {
-		/* allocate and initialize sync urbs */
-		subs->syncbuf = usb_alloc_coherent(subs->dev, SYNC_URBS * 4,
-						 GFP_KERNEL, &subs->sync_dma);
-		if (!subs->syncbuf)
-			goto out_of_memory;
-		for (i = 0; i < SYNC_URBS; i++) {
-			struct snd_urb_ctx *u = &subs->syncurb[i];
-			u->index = i;
-			u->subs = subs;
-			u->packets = 1;
-			u->urb = usb_alloc_urb(1, GFP_KERNEL);
-			if (!u->urb)
-				goto out_of_memory;
-			u->urb->transfer_buffer = subs->syncbuf + i * 4;
-			u->urb->transfer_dma = subs->sync_dma + i * 4;
-			u->urb->transfer_buffer_length = 4;
-			u->urb->pipe = subs->syncpipe;
-			u->urb->transfer_flags = URB_ISO_ASAP |
-						 URB_NO_TRANSFER_DMA_MAP;
-			u->urb->number_of_packets = 1;
-			u->urb->interval = 1 << subs->syncinterval;
-			u->urb->context = u;
-			u->urb->complete = snd_complete_sync_urb;
-		}
-	}
-	return 0;
-
-out_of_memory:
-	snd_usb_release_substream_urbs(subs, 0);
-	return -ENOMEM;
-}
-
-/*
- * prepare urb for full speed capture sync pipe
- *
- * fill the length and offset of each urb descriptor.
- * the fixed 10.14 frequency is passed through the pipe.
- */
-static int prepare_capture_sync_urb(struct snd_usb_substream *subs,
-				    struct snd_pcm_runtime *runtime,
-				    struct urb *urb)
-{
-	unsigned char *cp = urb->transfer_buffer;
-	struct snd_urb_ctx *ctx = urb->context;
-
-	urb->dev = ctx->subs->dev; /* we need to set this at each time */
-	urb->iso_frame_desc[0].length = 3;
-	urb->iso_frame_desc[0].offset = 0;
-	cp[0] = subs->freqn >> 2;
-	cp[1] = subs->freqn >> 10;
-	cp[2] = subs->freqn >> 18;
-	return 0;
-}
-
-/*
- * prepare urb for high speed capture sync pipe
- *
- * fill the length and offset of each urb descriptor.
- * the fixed 12.13 frequency is passed as 16.16 through the pipe.
- */
-static int prepare_capture_sync_urb_hs(struct snd_usb_substream *subs,
-				       struct snd_pcm_runtime *runtime,
-				       struct urb *urb)
-{
-	unsigned char *cp = urb->transfer_buffer;
-	struct snd_urb_ctx *ctx = urb->context;
-
-	urb->dev = ctx->subs->dev; /* we need to set this at each time */
-	urb->iso_frame_desc[0].length = 4;
-	urb->iso_frame_desc[0].offset = 0;
-	cp[0] = subs->freqn;
-	cp[1] = subs->freqn >> 8;
-	cp[2] = subs->freqn >> 16;
-	cp[3] = subs->freqn >> 24;
-	return 0;
-}
-
-/*
- * process after capture sync complete
- * - nothing to do
- */
-static int retire_capture_sync_urb(struct snd_usb_substream *subs,
-				   struct snd_pcm_runtime *runtime,
-				   struct urb *urb)
-{
-	return 0;
-}
-
-/*
- * prepare urb for capture data pipe
- *
- * fill the offset and length of each descriptor.
- *
- * we use a temporary buffer to write the captured data.
- * since the length of written data is determined by host, we cannot
- * write onto the pcm buffer directly...  the data is thus copied
- * later at complete callback to the global buffer.
- */
-static int prepare_capture_urb(struct snd_usb_substream *subs,
-			       struct snd_pcm_runtime *runtime,
-			       struct urb *urb)
-{
-	int i, offs;
-	struct snd_urb_ctx *ctx = urb->context;
-
-	offs = 0;
-	urb->dev = ctx->subs->dev; /* we need to set this at each time */
-	for (i = 0; i < ctx->packets; i++) {
-		urb->iso_frame_desc[i].offset = offs;
-		urb->iso_frame_desc[i].length = subs->curpacksize;
-		offs += subs->curpacksize;
-	}
-	urb->transfer_buffer_length = offs;
-	urb->number_of_packets = ctx->packets;
-	return 0;
-}
-
-/*
- * process after capture complete
- *
- * copy the data from each desctiptor to the pcm buffer, and
- * update the current position.
- */
-static int retire_capture_urb(struct snd_usb_substream *subs,
-			      struct snd_pcm_runtime *runtime,
-			      struct urb *urb)
-{
-	unsigned long flags;
-	unsigned char *cp;
-	int i;
-	unsigned int stride, frames, bytes, oldptr;
-	int period_elapsed = 0;
-
-	stride = runtime->frame_bits >> 3;
-
-	for (i = 0; i < urb->number_of_packets; i++) {
-		cp = (unsigned char *)urb->transfer_buffer + urb->iso_frame_desc[i].offset;
-		if (urb->iso_frame_desc[i].status) {
-			snd_printd(KERN_ERR "frame %d active: %d\n", i, urb->iso_frame_desc[i].status);
-			// continue;
-		}
-		bytes = urb->iso_frame_desc[i].actual_length;
-		frames = bytes / stride;
-		if (!subs->txfr_quirk)
-			bytes = frames * stride;
-		if (bytes % (runtime->sample_bits >> 3) != 0) {
-#ifdef CONFIG_SND_DEBUG_VERBOSE
-			int oldbytes = bytes;
-#endif
-			bytes = frames * stride;
-			snd_printdd(KERN_ERR "Corrected urb data len. %d->%d\n",
-							oldbytes, bytes);
-		}
-		/* update the current pointer */
-		spin_lock_irqsave(&subs->lock, flags);
-		oldptr = subs->hwptr_done;
-		subs->hwptr_done += bytes;
-		if (subs->hwptr_done >= runtime->buffer_size * stride)
-			subs->hwptr_done -= runtime->buffer_size * stride;
-		frames = (bytes + (oldptr % stride)) / stride;
-		subs->transfer_done += frames;
-		if (subs->transfer_done >= runtime->period_size) {
-			subs->transfer_done -= runtime->period_size;
-			period_elapsed = 1;
-		}
-		spin_unlock_irqrestore(&subs->lock, flags);
-		/* copy a data chunk */
-		if (oldptr + bytes > runtime->buffer_size * stride) {
-			unsigned int bytes1 =
-					runtime->buffer_size * stride - oldptr;
-			memcpy(runtime->dma_area + oldptr, cp, bytes1);
-			memcpy(runtime->dma_area, cp + bytes1, bytes - bytes1);
-		} else {
-			memcpy(runtime->dma_area + oldptr, cp, bytes);
-		}
-	}
-	if (period_elapsed)
-		snd_pcm_period_elapsed(subs->pcm_substream);
-	return 0;
-}
-
-/*
- * Process after capture complete when paused.  Nothing to do.
- */
-static int retire_paused_capture_urb(struct snd_usb_substream *subs,
-				     struct snd_pcm_runtime *runtime,
-				     struct urb *urb)
-{
-	return 0;
-}
-
-
-/*
- * prepare urb for playback sync pipe
- *
- * set up the offset and length to receive the current frequency.
- */
-static int prepare_playback_sync_urb(struct snd_usb_substream *subs,
-				     struct snd_pcm_runtime *runtime,
-				     struct urb *urb)
-{
-	struct snd_urb_ctx *ctx = urb->context;
-
-	urb->dev = ctx->subs->dev; /* we need to set this at each time */
-	urb->iso_frame_desc[0].length = min(4u, ctx->subs->syncmaxsize);
-	urb->iso_frame_desc[0].offset = 0;
-	return 0;
-}
-
-/*
- * process after playback sync complete
- *
- * Full speed devices report feedback values in 10.14 format as samples per
- * frame, high speed devices in 16.16 format as samples per microframe.
- * Because the Audio Class 1 spec was written before USB 2.0, many high speed
- * devices use a wrong interpretation, some others use an entirely different
- * format.  Therefore, we cannot predict what format any particular device uses
- * and must detect it automatically.
- */
-static int retire_playback_sync_urb(struct snd_usb_substream *subs,
-				    struct snd_pcm_runtime *runtime,
-				    struct urb *urb)
-{
-	unsigned int f;
-	int shift;
-	unsigned long flags;
-
-	if (urb->iso_frame_desc[0].status != 0 ||
-	    urb->iso_frame_desc[0].actual_length < 3)
-		return 0;
-
-	f = le32_to_cpup(urb->transfer_buffer);
-	if (urb->iso_frame_desc[0].actual_length == 3)
-		f &= 0x00ffffff;
-	else
-		f &= 0x0fffffff;
-	if (f == 0)
-		return 0;
-
-	if (unlikely(subs->freqshift == INT_MIN)) {
-		/*
-		 * The first time we see a feedback value, determine its format
-		 * by shifting it left or right until it matches the nominal
-		 * frequency value.  This assumes that the feedback does not
-		 * differ from the nominal value more than +50% or -25%.
-		 */
-		shift = 0;
-		while (f < subs->freqn - subs->freqn / 4) {
-			f <<= 1;
-			shift++;
-		}
-		while (f > subs->freqn + subs->freqn / 2) {
-			f >>= 1;
-			shift--;
-		}
-		subs->freqshift = shift;
-	}
-	else if (subs->freqshift >= 0)
-		f <<= subs->freqshift;
-	else
-		f >>= -subs->freqshift;
-
-	if (likely(f >= subs->freqn - subs->freqn / 8 && f <= subs->freqmax)) {
-		/*
-		 * If the frequency looks valid, set it.
-		 * This value is referred to in prepare_playback_urb().
-		 */
-		spin_lock_irqsave(&subs->lock, flags);
-		subs->freqm = f;
-		spin_unlock_irqrestore(&subs->lock, flags);
-	} else {
-		/*
-		 * Out of range; maybe the shift value is wrong.
-		 * Reset it so that we autodetect again the next time.
-		 */
-		subs->freqshift = INT_MIN;
-	}
-
-	return 0;
-}
-
-/* determine the number of frames in the next packet */
-static int snd_usb_audio_next_packet_size(struct snd_usb_substream *subs)
-{
-	if (subs->fill_max)
-		return subs->maxframesize;
-	else {
-		subs->phase = (subs->phase & 0xffff)
-			+ (subs->freqm << subs->datainterval);
-		return min(subs->phase >> 16, subs->maxframesize);
-	}
-}
-
-/*
- * Prepare urb for streaming before playback starts or when paused.
- *
- * We don't have any data, so we send silence.
- */
-static int prepare_nodata_playback_urb(struct snd_usb_substream *subs,
-				       struct snd_pcm_runtime *runtime,
-				       struct urb *urb)
-{
-	unsigned int i, offs, counts;
-	struct snd_urb_ctx *ctx = urb->context;
-	int stride = runtime->frame_bits >> 3;
-
-	offs = 0;
-	urb->dev = ctx->subs->dev;
-	for (i = 0; i < ctx->packets; ++i) {
-		counts = snd_usb_audio_next_packet_size(subs);
-		urb->iso_frame_desc[i].offset = offs * stride;
-		urb->iso_frame_desc[i].length = counts * stride;
-		offs += counts;
-	}
-	urb->number_of_packets = ctx->packets;
-	urb->transfer_buffer_length = offs * stride;
-	memset(urb->transfer_buffer,
-	       runtime->format == SNDRV_PCM_FORMAT_U8 ? 0x80 : 0,
-	       offs * stride);
-	return 0;
-}
-
-/*
- * prepare urb for playback data pipe
- *
- * Since a URB can handle only a single linear buffer, we must use double
- * buffering when the data to be transferred overflows the buffer boundary.
- * To avoid inconsistencies when updating hwptr_done, we use double buffering
- * for all URBs.
- */
-static int prepare_playback_urb(struct snd_usb_substream *subs,
-				struct snd_pcm_runtime *runtime,
-				struct urb *urb)
-{
-	int i, stride;
-	unsigned int counts, frames, bytes;
-	unsigned long flags;
-	int period_elapsed = 0;
-	struct snd_urb_ctx *ctx = urb->context;
+	if (!u->urb)
+		return;
 
-	stride = runtime->frame_bits >> 3;
-
-	frames = 0;
-	urb->dev = ctx->subs->dev; /* we need to set this at each time */
-	urb->number_of_packets = 0;
-	spin_lock_irqsave(&subs->lock, flags);
-	for (i = 0; i < ctx->packets; i++) {
-		counts = snd_usb_audio_next_packet_size(subs);
-		/* set up descriptor */
-		urb->iso_frame_desc[i].offset = frames * stride;
-		urb->iso_frame_desc[i].length = counts * stride;
-		frames += counts;
-		urb->number_of_packets++;
-		subs->transfer_done += counts;
-		if (subs->transfer_done >= runtime->period_size) {
-			subs->transfer_done -= runtime->period_size;
-			period_elapsed = 1;
-			if (subs->fmt_type == UAC_FORMAT_TYPE_II) {
-				if (subs->transfer_done > 0) {
-					/* FIXME: fill-max mode is not
-					 * supported yet */
-					frames -= subs->transfer_done;
-					counts -= subs->transfer_done;
-					urb->iso_frame_desc[i].length =
-						counts * stride;
-					subs->transfer_done = 0;
-				}
-				i++;
-				if (i < ctx->packets) {
-					/* add a transfer delimiter */
-					urb->iso_frame_desc[i].offset =
-						frames * stride;
-					urb->iso_frame_desc[i].length = 0;
-					urb->number_of_packets++;
-				}
-				break;
-			}
-		}
-		if (period_elapsed) /* finish at the period boundary */
-			break;
-	}
-	bytes = frames * stride;
-	if (subs->hwptr_done + bytes > runtime->buffer_size * stride) {
-		/* err, the transferred area goes over buffer boundary. */
-		unsigned int bytes1 =
-			runtime->buffer_size * stride - subs->hwptr_done;
-		memcpy(urb->transfer_buffer,
-		       runtime->dma_area + subs->hwptr_done, bytes1);
-		memcpy(urb->transfer_buffer + bytes1,
-		       runtime->dma_area, bytes - bytes1);
-	} else {
-		memcpy(urb->transfer_buffer,
-		       runtime->dma_area + subs->hwptr_done, bytes);
-	}
-	subs->hwptr_done += bytes;
-	if (subs->hwptr_done >= runtime->buffer_size * stride)
-		subs->hwptr_done -= runtime->buffer_size * stride;
-
-	/* update delay with exact number of samples queued */
-	runtime->delay = subs->last_delay;
-	runtime->delay += frames;
-	subs->last_delay = runtime->delay;
-
-	/* realign last_frame_number */
-	subs->last_frame_number = usb_get_current_frame_number(subs->dev);
-	subs->last_frame_number &= 0xFF; /* keep 8 LSBs */
-
-	spin_unlock_irqrestore(&subs->lock, flags);
-	urb->transfer_buffer_length = bytes;
-	if (period_elapsed)
-		snd_pcm_period_elapsed(subs->pcm_substream);
-	return 0;
-}
-
-/*
- * process after playback data complete
- * - decrease the delay count again
- */
-static int retire_playback_urb(struct snd_usb_substream *subs,
-			       struct snd_pcm_runtime *runtime,
-			       struct urb *urb)
-{
-	unsigned long flags;
-	int stride = runtime->frame_bits >> 3;
-	int processed = urb->transfer_buffer_length / stride;
-	int est_delay;
-
-	spin_lock_irqsave(&subs->lock, flags);
-
-	est_delay = snd_usb_pcm_delay(subs, runtime->rate);
-	/* update delay with exact number of samples played */
-	if (processed > subs->last_delay)
-		subs->last_delay = 0;
-	else
-		subs->last_delay -= processed;
-	runtime->delay = subs->last_delay;
-
-	/*
-	 * Report when delay estimate is off by more than 2ms.
-	 * The error should be lower than 2ms since the estimate relies
-	 * on two reads of a counter updated every ms.
-	 */
-	if (abs(est_delay - subs->last_delay) * 1000 > runtime->rate * 2)
-		snd_printk(KERN_DEBUG "delay: estimated %d, actual %d\n",
-			est_delay, subs->last_delay);
-
-	spin_unlock_irqrestore(&subs->lock, flags);
-	return 0;
+	if (u->buffer_size)
+		usb_free_coherent(u->ep->chip->dev, u->buffer_size,
+				  u->urb->transfer_buffer,
+				  u->urb->transfer_dma);
+	usb_free_urb(u->urb);
+	u->urb = NULL;
 }
 
 static const char *usb_error_string(int err)
@@ -801,133 +93,6 @@ static const char *usb_error_string(int err)
 	}
 }
 
-/*
- * set up and start data/sync urbs
- */
-static int start_urbs(struct snd_usb_substream *subs, struct snd_pcm_runtime *runtime)
-{
-	unsigned int i;
-	int err;
-
-	if (subs->stream->chip->shutdown)
-		return -EBADFD;
-
-	for (i = 0; i < subs->nurbs; i++) {
-		if (snd_BUG_ON(!subs->dataurb[i].urb))
-			return -EINVAL;
-		if (subs->ops.prepare(subs, runtime, subs->dataurb[i].urb) < 0) {
-			snd_printk(KERN_ERR "cannot prepare datapipe for urb %d\n", i);
-			goto __error;
-		}
-	}
-	if (subs->syncpipe) {
-		for (i = 0; i < SYNC_URBS; i++) {
-			if (snd_BUG_ON(!subs->syncurb[i].urb))
-				return -EINVAL;
-			if (subs->ops.prepare_sync(subs, runtime, subs->syncurb[i].urb) < 0) {
-				snd_printk(KERN_ERR "cannot prepare syncpipe for urb %d\n", i);
-				goto __error;
-			}
-		}
-	}
-
-	subs->active_mask = 0;
-	subs->unlink_mask = 0;
-	subs->running = 1;
-	for (i = 0; i < subs->nurbs; i++) {
-		err = usb_submit_urb(subs->dataurb[i].urb, GFP_ATOMIC);
-		if (err < 0) {
-			snd_printk(KERN_ERR "cannot submit datapipe "
-				   "for urb %d, error %d: %s\n",
-				   i, err, usb_error_string(err));
-			goto __error;
-		}
-		set_bit(i, &subs->active_mask);
-	}
-	if (subs->syncpipe) {
-		for (i = 0; i < SYNC_URBS; i++) {
-			err = usb_submit_urb(subs->syncurb[i].urb, GFP_ATOMIC);
-			if (err < 0) {
-				snd_printk(KERN_ERR "cannot submit syncpipe "
-					   "for urb %d, error %d: %s\n",
-					   i, err, usb_error_string(err));
-				goto __error;
-			}
-			set_bit(i + 16, &subs->active_mask);
-		}
-	}
-	return 0;
-
- __error:
-	// snd_pcm_stop(subs->pcm_substream, SNDRV_PCM_STATE_XRUN);
-	deactivate_urbs_old(subs, 0, 0);
-	return -EPIPE;
-}
-
-
-/*
- */
-static struct snd_urb_ops audio_urb_ops[2] = {
-	{
-		.prepare =	prepare_nodata_playback_urb,
-		.retire =	retire_playback_urb,
-		.prepare_sync =	prepare_playback_sync_urb,
-		.retire_sync =	retire_playback_sync_urb,
-	},
-	{
-		.prepare =	prepare_capture_urb,
-		.retire =	retire_capture_urb,
-		.prepare_sync =	prepare_capture_sync_urb,
-		.retire_sync =	retire_capture_sync_urb,
-	},
-};
-
-/*
- * initialize the substream instance.
- */
-
-void snd_usb_init_substream(struct snd_usb_stream *as,
-			    int stream, struct audioformat *fp)
-{
-	struct snd_usb_substream *subs = &as->substream[stream];
-
-	INIT_LIST_HEAD(&subs->fmt_list);
-	spin_lock_init(&subs->lock);
-
-	subs->stream = as;
-	subs->direction = stream;
-	subs->dev = as->chip->dev;
-	subs->txfr_quirk = as->chip->txfr_quirk;
-	subs->ops = audio_urb_ops[stream];
-	if (snd_usb_get_speed(subs->dev) >= USB_SPEED_HIGH)
-		subs->ops.prepare_sync = prepare_capture_sync_urb_hs;
-
-	snd_usb_set_pcm_ops(as->pcm, stream);
-
-	list_add_tail(&fp->list, &subs->fmt_list);
-	subs->formats |= fp->formats;
-	subs->endpoint = fp->endpoint;
-	subs->num_formats++;
-	subs->fmt_type = fp->fmt_type;
-}
-
-int snd_usb_substream_prepare(struct snd_usb_substream *subs,
-			      struct snd_pcm_runtime *runtime)
-{
-	/* clear urbs (to be sure) */
-	deactivate_urbs_old(subs, 0, 1);
-	wait_clear_urbs_old(subs);
-
-	/* for playback, submit the URBs now; otherwise, the first hwptr_done
-	 * updates for all URBs would happen at the same time when starting */
-	if (subs->direction == SNDRV_PCM_STREAM_PLAYBACK) {
-		subs->ops.prepare = prepare_nodata_playback_urb;
-		return start_urbs(subs, runtime);
-	}
-
-	return 0;
-}
-
 int snd_usb_endpoint_implict_feedback_sink(struct snd_usb_endpoint *ep)
 {
 	return  ep->sync_master &&
diff --git a/sound/usb/endpoint.h b/sound/usb/endpoint.h
index e540768..ee2723f 100644
--- a/sound/usb/endpoint.h
+++ b/sound/usb/endpoint.h
@@ -1,21 +1,6 @@
 #ifndef __USBAUDIO_ENDPOINT_H
 #define __USBAUDIO_ENDPOINT_H
 
-void snd_usb_init_substream(struct snd_usb_stream *as,
-			    int stream,
-			    struct audioformat *fp);
-
-int snd_usb_init_substream_urbs(struct snd_usb_substream *subs,
-				unsigned int period_bytes,
-				unsigned int rate,
-				unsigned int frame_bits);
-
-void snd_usb_release_substream_urbs(struct snd_usb_substream *subs, int force);
-
-int snd_usb_substream_prepare(struct snd_usb_substream *subs,
-			      struct snd_pcm_runtime *runtime);
-
-
 #define SND_USB_ENDPOINT_TYPE_DATA     0
 #define SND_USB_ENDPOINT_TYPE_SYNC     1
 
-- 
1.7.5.4

  parent reply	other threads:[~2011-12-20 23:35 UTC|newest]

Thread overview: 15+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2011-12-20 23:34 [PATCH 0/5] snd-usb endpoint rework, take 5 Daniel Mack
2011-12-20 23:34 ` [PATCH 1/5] ALSA: snd-usb: add snd_usb_audio-wide mutex Daniel Mack
2011-12-20 23:34 ` [PATCH 2/5] ALSA: snd-usb: implement new endpoint streaming model Daniel Mack
2011-12-21 16:16   ` Aurélien Leblond
2011-12-21 16:34     ` Daniel Mack
2011-12-21 17:11       ` Aurélien Leblond
2011-12-21 17:18         ` Daniel Mack
2011-12-22 17:55           ` Aurélien Leblond
2011-12-22 19:04             ` Daniel Mack
2011-12-20 23:34 ` [PATCH 3/5] ALSA: snd-usb: switch over to new endpoint streaming logic Daniel Mack
2011-12-20 23:34 ` Daniel Mack [this message]
2011-12-20 23:34 ` [PATCH 5/5] ALSA: snd-usb: add support for implicit feedback Daniel Mack
  -- strict thread matches above, loose matches on Subject: below --
2011-12-20  9:48 [PATCH 0/5] snd-usb endpoint rework, take 4 Daniel Mack
2011-12-20  9:48 ` [PATCH 4/5] ALSA: snd-usb: remove old streaming logic Daniel Mack
2011-12-18 23:02 [PATCH 0/5] snd-usb endpoint logic rework, version 3 Daniel Mack
2011-12-18 23:02 ` [PATCH 4/5] ALSA: snd-usb: remove old streaming logic Daniel Mack
2011-11-18 20:05 [PATCH 0/5] RFC v2 for snd-usb endpoint logic rework Daniel Mack
2011-11-18 20:05 ` [PATCH 4/5] ALSA: snd-usb: remove old streaming logic Daniel Mack

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1324424088-5705-5-git-send-email-zonque@gmail.com \
    --to=zonque@gmail.com \
    --cc=alsa-devel@alsa-project.org \
    --cc=blablack@gmail.com \
    --cc=clemens@ladisch.de \
    --cc=gdiffey@gmail.com \
    --cc=linuxaudio@showlabor.de \
    --cc=tiwai@suse.de \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.