From: Graeme Russ <graeme.russ@gmail.com>
To: u-boot@lists.denx.de
Subject: [U-Boot] [PATCH v2 12/17] CHECKPATCH: arch/x86/lib/*
Date: Thu, 5 Jan 2012 06:59:50 +1100 [thread overview]
Message-ID: <1325707195-3218-12-git-send-email-graeme.russ@gmail.com> (raw)
In-Reply-To: <1325707195-3218-1-git-send-email-graeme.russ@gmail.com>
Signed-off-by: Graeme Russ <graeme.russ@gmail.com>
---
Changes for v2:
- None
arch/x86/lib/bios.S | 134 +++++++++++++++++++++++++--------------
arch/x86/lib/realmode_switch.S | 61 +++++++++++--------
2 files changed, 122 insertions(+), 73 deletions(-)
diff --git a/arch/x86/lib/bios.S b/arch/x86/lib/bios.S
index ce8deb5..239aaa9 100644
--- a/arch/x86/lib/bios.S
+++ b/arch/x86/lib/bios.S
@@ -246,11 +246,9 @@ rm_int1f:
rm_def_int:
iret
-
/*
- * All interrupt jumptable entries jump to here
- * after pushing the interrupt vector number onto the
- * stack.
+ * All interrupt jumptable entries jump to here after pushing the
+ * interrupt vector number onto the stack.
*/
any_interrupt16:
MAKE_BIOS_STACK
@@ -272,7 +270,8 @@ gs movw OFFS_VECTOR(%bp), %ax
je Lint_1ah
movw $0xffff, %ax
jmp Lout
-Lint_10h: /* VGA BIOS services */
+Lint_10h:
+ /* VGA BIOS services */
call bios_10h
jmp Lout
Lint_11h:
@@ -281,35 +280,42 @@ Lint_11h:
Lint_12h:
call bios_12h
jmp Lout
-Lint_13h: /* BIOS disk services */
+Lint_13h:
+ /* BIOS disk services */
call bios_13h
jmp Lout
-Lint_15h: /* Misc. BIOS services */
+Lint_15h:
+ /* Misc. BIOS services */
call bios_15h
jmp Lout
-Lint_16h: /* keyboard services */
+Lint_16h:
+ /* keyboard services */
call bios_16h
jmp Lout
-Lint_1ah: /* PCI bios */
+Lint_1ah:
+ /* PCI bios */
call bios_1ah
jmp Lout
Lout:
cmpw $0, %ax
je Lhandeled
- /* Insert code for unhandeled INTs here.
+ /*
+ * Insert code for unhandeled INTs here.
*
- * ROLO prints a message to the console
- * (we could do that but then we're in 16bit mode
- * so we'll have to get back into 32bit mode
- * to use the console I/O routines (if we do this
- * we shuls make int 0x10 and int 0x16 work as well))
+ * ROLO prints a message to the console we could do that but then
+ * we're in 16bit mode so we'll have to get back into 32bit mode
+ * to use the console I/O routines (if we do this we should make
+ * int 0x10 and int 0x16 work as well)
*/
Lhandeled:
RESTORE_CALLERS_STACK
- addw $2,%sp /* dump vector number */
- iret /* return from interrupt */
+ /* dump vector number */
+ addw $2,%sp
+
+ /* return from interrupt */
+ iret
/*
************************************************************
@@ -327,22 +333,24 @@ gs movw OFFS_AX(%bp), %ax
je Lvid_cfg
movw $0xffff, %ax
ret
-Lcur_pos: /* Read Cursor Position and Size */
+Lcur_pos:
+ /* Read Cursor Position and Size */
gs movw $0, OFFS_CX(%bp)
gs movw $0, OFFS_DX(%bp)
xorw %ax, %ax
ret
-Lvid_state: /* Get Video State */
-gs movw $(80 << 8|0x03), OFFS_AX(%bp) /* 80 columns, 80x25, 16 colors */
+Lvid_state:
+ /* Get Video State - 80 columns, 80x25, 16 colors */
+gs movw $(80 << 8|0x03), OFFS_AX(%bp)
gs movw $0, OFFS_BX(%bp)
xorw %ax, %ax
ret
-Lvid_cfg: /* Video Subsystem Configuration (EGA/VGA) */
-gs movw $0x10, OFFS_BX(%bp) /* indicate CGA/MDA/HGA */
+Lvid_cfg:
+ /* Video Subsystem Configuration (EGA/VGA) - indicate CGA/MDA/HGA */
+gs movw $0x10, OFFS_BX(%bp)
xorw %ax, %ax
ret
-
/*
************************************************************
* BIOS interrupt 11h -- Equipment determination
@@ -355,7 +363,6 @@ gs movw %ax, OFFS_AX(%bp)
xorw %ax, %ax
ret
-
/*
************************************************************
* BIOS interrupt 12h -- Get Memory Size
@@ -370,16 +377,18 @@ cs movw ram_in_64kb_chunks, %ax
b12_more_than_640k:
movw $0x280, %ax
b12_return:
-gs movw %ax, OFFS_AX(%bp) /* return number of kilobytes in ax */
+ /* return number of kilobytes in ax */
+gs movw %ax, OFFS_AX(%bp)
gs movw OFFS_FLAGS(%bp), %ax
- andw $0xfffe, %ax /* clear carry -- function succeeded */
+
+ /* clear carry -- function succeeded */
+ andw $0xfffe, %ax
gs movw %ax, OFFS_FLAGS(%bp)
xorw %ax, %ax
ret
-
/*
************************************************************
* BIOS interrupt 13h -- Disk services
@@ -394,12 +403,13 @@ gs movw OFFS_AX(%bp), %ax
ret
Lfunc_15h:
gs movw OFFS_AX(%bp), %ax
- andw $0xff, %ax /* return AH=0->drive not present */
+
+ /* return AH=0->drive not present */
+ andw $0x00ff, %ax
gs movw %ax, OFFS_AX(%bp)
xorw %ax, %ax
ret
-
/*
***********************************************************
* BIOS interrupt 15h -- Miscellaneous services
@@ -417,9 +427,12 @@ gs movw OFFS_AX(%bp), %ax
movw $0xffff, %ax
ret
-Lfunc_c0h: /* Return System Configuration Parameters (PS2 only) */
+Lfunc_c0h:
+ /* Return System Configuration Parameters (PS2 only) */
gs movw OFFS_FLAGS(%bp), %ax
- orw $1, %ax /* return carry -- function not supported */
+
+ /* return carry -- function not supported */
+ orw $1, %ax
gs movw %ax, OFFS_FLAGS(%bp)
xorw %ax, %ax
ret
@@ -430,38 +443,56 @@ gs movw OFFS_AX(%bp), %ax
cmpw $1, %ax
je Lfunc_e801h
gs movw OFFS_FLAGS(%bp), %ax
- orw $1, %ax /* return carry -- function not supported */
+
+ /* return carry -- function not supported */
+ orw $1, %ax
gs movw %ax, OFFS_FLAGS(%bp)
xorw %ax, %ax
ret
-Lfunc_e801h: /* Get memory size for >64M Configurations */
+Lfunc_e801h:
+ /* Get memory size for >64M Configurations */
cs movw ram_in_64kb_chunks, %ax
cmpw $0x100, %ax
ja e801_more_than_16mb
- shlw $6, %ax /* multiply by 64 */
- subw $0x400, %ax /* 1st meg does not count */
-gs movw %ax, OFFS_AX(%bp) /* return memory size between 1M and 16M in 1kb chunks in AX and CX */
+ /* multiply by 64 */
+ shlw $6, %ax
+
+ /* 1st meg does not count */
+ subw $0x400, %ax
+
+ /* return memory size between 1M and 16M in 1kb chunks in AX and CX */
+gs movw %ax, OFFS_AX(%bp)
gs movw %ax, OFFS_CX(%bp)
-gs movw $0, OFFS_BX(%bp) /* set BX and DX to 0*/
+
+ /* set BX and DX to 0*/
+gs movw $0, OFFS_BX(%bp)
gs movw $0, OFFS_DX(%bp)
gs movw OFFS_FLAGS(%bp), %ax
- andw $0xfffe, %ax /* clear carry -- function succeeded */
+
+ /* clear carry -- function succeeded */
+ andw $0xfffe, %ax
gs movw %ax, OFFS_FLAGS(%bp)
xorw %ax, %ax
ret
e801_more_than_16mb:
- subw $0x100, %ax /* subtract 16MB */
+ /* subtract 16MB */
+ subw $0x100, %ax
-gs movw $0x3c00, OFFS_AX(%bp) /* return 0x3c00 (16MB-1MB) in AX and CX */
+ /* return 0x3c00 (16MB-1MB) in AX and CX */
+gs movw $0x3c00, OFFS_AX(%bp)
gs movw $0x3c00, OFFS_CX(%bp)
-gs movw %ax, OFFS_BX(%bp) /* set BX and DX to number of 64kb chunks above 16MB */
+
+ /* set BX and DX to number of 64kb chunks above 16MB */
+gs movw %ax, OFFS_BX(%bp)
gs movw %ax, OFFS_DX(%bp)
gs movw OFFS_FLAGS(%bp), %ax
- andw $0xfffe, %ax /* clear carry -- function succeeded */
+
+ /* clear carry -- function succeeded */
+ andw $0xfffe, %ax
gs movw %ax, OFFS_FLAGS(%bp)
xorw %ax, %ax
ret
@@ -473,18 +504,22 @@ cs movw ram_in_64kb_chunks, %ax
movw $0x100, %ax
b88_not_more_than16:
shlw $6, %ax
- subw $0x400, %ax /* 1st meg does not count */
-gs movw %ax, OFFS_AX(%bp) /* return number of kilobytes between 16MB and 16MB in ax */
+ /* 1st meg does not count */
+ subw $0x400, %ax
+
+ /* return number of kilobytes between 16MB and 16MB in ax */
+gs movw %ax, OFFS_AX(%bp)
gs movw OFFS_FLAGS(%bp), %ax
- andw $0xfffe, %ax /* clear carry -- function succeeded */
+
+ /* clear carry -- function succeeded */
+ andw $0xfffe, %ax
gs movw %ax, OFFS_FLAGS(%bp)
xorw %ax, %ax
ret
-
/*
************************************************************
* BIOS interrupt 16h -- keyboard services
@@ -498,7 +533,8 @@ gs movw OFFS_AX(%bp), %ax
movw $0xffff, %ax
ret
Lfunc_03h:
- xorw %ax, %ax /* do nothing -- function not supported */
+ /* do nothing -- function not supported */
+ xorw %ax, %ax
ret
/*
@@ -514,7 +550,9 @@ gs movw OFFS_AX(%bp), %ax
ret
Lfunc_b1h:
call realmode_pci_bios
- xorw %ax, %ax /* do nothing -- function not supported */
+
+ /* do nothing -- function not supported */
+ xorw %ax, %ax
ret
diff --git a/arch/x86/lib/realmode_switch.S b/arch/x86/lib/realmode_switch.S
index 7ee709a..c4c4c43 100644
--- a/arch/x86/lib/realmode_switch.S
+++ b/arch/x86/lib/realmode_switch.S
@@ -44,12 +44,13 @@
* e40 ss;
*/
-#define a32 .byte 0x67; /* address size prefix 32 */
-#define o32 .byte 0x66; /* operand size prefix 32 */
+#define a32 .byte 0x67; /* address size prefix 32 */
+#define o32 .byte 0x66; /* operand size prefix 32 */
.section .realmode, "ax"
.code16
- /* 16bit protected mode code here */
+
+ /* 16bit protected mode code here */
.globl realmode_enter
realmode_enter:
o32 pusha
@@ -69,20 +70,23 @@ o32 pushf
movw %ax, %gs
lidt realmode_idt_ptr
- movl %cr0, %eax /* Go back into real mode by */
- andl $0x7ffffffe, %eax /* clearing PE to 0 */
+ /* Go back into real mode by clearing PE to 0 */
+ movl %cr0, %eax
+ andl $0x7ffffffe, %eax
movl %eax, %cr0
- ljmp $0x0,$do_realmode /* switch to real mode */
-do_realmode: /* realmode code from here */
+ /* switch to real mode */
+ ljmp $0x0,$do_realmode
+
+do_realmode:
+ /* realmode code from here */
movw %cs,%ax
movw %ax,%ds
movw %ax,%es
movw %ax,%fs
movw %ax,%gs
- /* create a temporary stack */
-
+ /* create a temporary stack */
movw $0xc0, %ax
movw %ax, %ss
movw $0x200, %ax
@@ -114,26 +118,29 @@ o32 popf
popw %ss
movl %eax, %esp
cs movl temp_eax, %eax
- wbinvd /* self-modifying code,
- * better flush the cache */
+
+ /* self-modifying code, better flush the cache */
+ wbinvd
.byte 0x9a /* lcall */
temp_ip:
.word 0 /* new ip */
temp_cs:
.word 0 /* new cs */
+
realmode_ret:
- /* save eax, esp and ss */
+ /* save eax, esp and ss */
cs movl %eax, saved_eax
movl %esp, %eax
cs movl %eax, saved_esp
movw %ss, %ax
cs movw %ax, saved_ss
- /* restore the stack, note that we set sp to 0x244;
+ /*
+ * restore the stack, note that we set sp to 0x244;
* pt_regs is 0x44 bytes long and we push the structure
- * backwards on to the stack, bottom first */
-
+ * backwards on to the stack, bottom first
+ */
movw $0xc0, %ax
movw %ax, %ss
movw $0x244, %ax
@@ -169,12 +176,15 @@ cs movw temp_ip, %ax
pushl %ebx
o32 cs lidt saved_idt
-o32 cs lgdt saved_gdt /* Set GDTR */
+o32 cs lgdt saved_gdt
- movl %cr0, %eax /* Go back into protected mode */
- orl $1,%eax /* reset PE to 1 */
+ /* Go back into protected mode reset PE to 1 */
+ movl %cr0, %eax
+ orl $1,%eax
movl %eax, %cr0
- jmp next_line /* flush prefetch queue */
+
+ /* flush prefetch queue */
+ jmp next_line
next_line:
movw $return_ptr, %ax
movw %ax,%bp
@@ -182,12 +192,13 @@ o32 cs ljmp *(%bp)
.code32
protected_mode:
- movl $0x18,%eax /* reload GDT[3] */
- movw %ax,%fs /* reset FS */
- movw %ax,%ds /* reset DS */
- movw %ax,%gs /* reset GS */
- movw %ax,%es /* reset ES */
- movw %ax,%ss /* reset SS */
+ /* Reload segment registers */
+ movl $0x18, %eax
+ movw %ax, %fs
+ movw %ax, %ds
+ movw %ax, %gs
+ movw %ax, %es
+ movw %ax, %ss
movl saved_protected_mode_esp, %eax
movl %eax, %esp
popf
--
1.7.5.2.317.g391b14
next prev parent reply other threads:[~2012-01-04 19:59 UTC|newest]
Thread overview: 87+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-01-02 4:09 [U-Boot] [PATCH 00/17] x86: Rework of board init code (plus support patches) Graeme Russ
2012-01-02 4:09 ` [U-Boot] [PATCH 01/17] x86: Import glibc memcpy implementation Graeme Russ
2012-01-04 5:18 ` Simon Glass
2012-01-04 19:59 ` [U-Boot] [PATCH v2 " Graeme Russ
2012-01-04 19:59 ` [U-Boot] [PATCH v2 02/17] x86: Speed up copy-to-RAM and clear BSS operations Graeme Russ
2012-01-04 20:04 ` Graeme Russ
2012-01-12 4:45 ` Simon Glass
2012-01-04 19:59 ` [U-Boot] [PATCH v2 03/17] x86: Remove GDR related magic numbers Graeme Russ
2012-01-07 22:05 ` Simon Glass
2012-01-12 4:46 ` Simon Glass
2012-01-04 19:59 ` [U-Boot] [PATCH v2 04/17] x86: Rework Global Descriptor Table loading Graeme Russ
2012-01-12 4:47 ` Simon Glass
2012-01-04 19:59 ` [U-Boot] [PATCH v2 05/17] x86: Simplify Flash-to-RAM code execution transition Graeme Russ
2012-01-12 4:48 ` Simon Glass
2012-01-04 19:59 ` [U-Boot] [PATCH v2 06/17] x86: Rework relocation calculations Graeme Russ
2012-01-12 4:49 ` Simon Glass
2012-01-04 19:59 ` [U-Boot] [PATCH v2 07/17] x86: Use fs for global data Graeme Russ
2012-01-12 4:51 ` Simon Glass
2012-01-04 19:59 ` [U-Boot] [PATCH v2 08/17] x86: Set GD_FLG_RELOC after entering in-RAM copy of U-Boot Graeme Russ
2012-01-12 4:51 ` Simon Glass
2012-01-04 19:59 ` [U-Boot] [PATCH v2 09/17] x86: Create weak init_cache() and default enable_caches() functions Graeme Russ
2012-01-12 4:55 ` Simon Glass
2012-01-04 19:59 ` [U-Boot] [PATCH v2 10/17] x86: Allow cache before copy to RAM Graeme Russ
2012-01-12 4:56 ` Simon Glass
2012-01-04 19:59 ` [U-Boot] [PATCH v2 11/17] x86: Tweak IDT and GDT for alignment and readability Graeme Russ
2012-01-12 5:00 ` Simon Glass
2012-01-04 19:59 ` Graeme Russ [this message]
2012-01-12 5:01 ` [U-Boot] [PATCH v2 12/17] CHECKPATCH: arch/x86/lib/* Simon Glass
2012-01-04 19:59 ` [U-Boot] [PATCH v2 13/17] x86: Move do_go_exec() out of board.c Graeme Russ
2012-01-12 5:01 ` Simon Glass
2012-01-04 19:59 ` [U-Boot] [PATCH v2 14/17] x86: Move setup_pcat_compatibility() " Graeme Russ
2012-01-12 5:02 ` Simon Glass
2012-01-04 19:59 ` [U-Boot] [PATCH v2 15/17] x86: Move relocation code " Graeme Russ
2012-01-07 22:15 ` Simon Glass
2012-01-08 9:04 ` Graeme Russ
2012-01-08 17:59 ` Simon Glass
2012-01-12 5:03 ` Simon Glass
2012-01-04 19:59 ` [U-Boot] [PATCH v2 16/17] x86: Split init functions " Graeme Russ
2012-01-12 5:03 ` Simon Glass
2012-01-04 19:59 ` [U-Boot] [PATCH v2 17/17] x86: Convert board_init_f_r to a processing loop Graeme Russ
2012-01-07 22:21 ` Simon Glass
2012-01-08 9:10 ` Graeme Russ
2012-01-08 18:01 ` Simon Glass
2012-01-12 5:04 ` Simon Glass
2012-01-12 4:44 ` [U-Boot] [PATCH v2 01/17] x86: Import glibc memcpy implementation Simon Glass
2012-01-02 4:09 ` [U-Boot] [PATCH 02/17] x86: Speed up copy-to-RAM and clear BSS operations Graeme Russ
2012-01-04 5:21 ` Simon Glass
2012-01-04 10:04 ` Graeme Russ
2012-01-02 4:09 ` [U-Boot] [PATCH 03/17] x86: Remove GDR related magic numbers Graeme Russ
2012-01-04 5:23 ` Simon Glass
2012-01-04 10:20 ` Graeme Russ
2012-01-02 4:09 ` [U-Boot] [PATCH 04/17] x86: Rework Global Descriptor Table loading Graeme Russ
2012-01-04 5:24 ` Simon Glass
2012-01-04 10:30 ` Graeme Russ
2012-01-02 4:09 ` [U-Boot] [PATCH 05/17] x86: Simplify Flash-to-RAM code execution transition Graeme Russ
2012-01-04 5:28 ` Simon Glass
2012-01-04 10:59 ` Graeme Russ
2012-01-02 4:09 ` [U-Boot] [PATCH 06/17] x86: Rework relocation calcuations Graeme Russ
2012-01-04 5:30 ` Simon Glass
2012-01-02 4:09 ` [U-Boot] [PATCH 07/17] x86: Use fs for global data Graeme Russ
2012-01-04 5:36 ` Simon Glass
2012-01-04 11:14 ` Graeme Russ
2012-01-02 4:09 ` [U-Boot] [PATCH 08/17] x86: Set GD_FLG_RELOC after entering in-RAM copy of U-Boot Graeme Russ
2012-01-04 5:37 ` Simon Glass
2012-01-02 4:09 ` [U-Boot] [PATCH 09/17] x86: Create weak init_cache() function Graeme Russ
2012-01-04 5:38 ` Simon Glass
2012-01-04 11:25 ` Graeme Russ
2012-01-02 4:09 ` [U-Boot] [PATCH 10/17] x86: Allow cache before copy to RAM Graeme Russ
2012-01-04 5:40 ` Simon Glass
2012-01-04 11:29 ` Graeme Russ
2012-01-02 4:09 ` [U-Boot] [PATCH 11/17] CHECKPATCH: arch/x86/cpu/* Graeme Russ
2012-01-04 5:42 ` Simon Glass
2012-01-04 11:35 ` Graeme Russ
2012-01-02 4:09 ` [U-Boot] [PATCH 12/17] CHECKPATCH: arch/x86/lib/* Graeme Russ
2012-01-04 5:47 ` Simon Glass
2012-01-02 4:09 ` [U-Boot] [PATCH 13/17] x86: Move do_go_exec() out of board.c Graeme Russ
2012-01-04 5:48 ` Simon Glass
2012-01-02 4:09 ` [U-Boot] [PATCH 14/17] x86: Move setup_pcat_compatibility() " Graeme Russ
2012-01-04 5:48 ` Simon Glass
2012-01-04 11:38 ` Graeme Russ
2012-01-02 4:09 ` [U-Boot] [PATCH 15/17] x86: Move relocation code " Graeme Russ
2012-01-02 4:09 ` [U-Boot] [PATCH 16/17] x86: Simplify board.c Graeme Russ
2012-01-04 5:51 ` Simon Glass
2012-01-04 11:50 ` Graeme Russ
2012-01-02 4:09 ` [U-Boot] [PATCH 17/17] x86: Tweak initialisation procedure Graeme Russ
2012-01-04 5:52 ` Simon Glass
2012-01-04 12:02 ` Graeme Russ
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1325707195-3218-12-git-send-email-graeme.russ@gmail.com \
--to=graeme.russ@gmail.com \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.