From mboxrd@z Thu Jan  1 00:00:00 1970
From: Stephan Linz <linz@li-pro.net>
Date: Sun, 15 Jan 2012 16:41:59 +0100
Subject: [U-Boot] LL TEMAC V8 refactored
Message-ID: <1326642119.18981.190.camel@keto>
List-Id: <u-boot.lists.denx.de>
MIME-Version: 1.0
Content-Type: text/plain; charset="us-ascii"
Content-Transfer-Encoding: 7bit
To: u-boot@lists.denx.de

Back to the discussion from the last three months I have refactored the
LL TEMAC driver again. The version V8 is ready to next review and
testing. I myself have tested it successfully on an ML605 (TEMAC hard
core) and on a SP3ADSP1800 (TEMAC soft core). Thanks to Marek, Wolfgang,
Andy and Michal to review V4..7. Special thanks to Ricardo. He has
tested the driver on a Xilinx Virtex5 FX (PPC440) platform.

To use the driver on Microblaze, you will need all additional platform
patches by Michal Simek and me. All related patches are bundled on
patchwork:
  - http://patchwork.ozlabs.org/bundle/rexut/net-ll_temac/

@Michal: Please merge the patches into the custodian git tree for final
testing.

@Ricardo: Please test the new V8 patch on your PPC440 platform again and
post the patches for xilinx/ppc440-generic if you want.


-- 
Best regards,
Stephan Linz
______________________________________________________________________________
MB-Ref: http://www.li-pro.de/xilinx_mb:mbref:start
OpenDCC: http://www.li-pro.net/opendcc.phtml
PC/M: http://www.li-pro.net/pcm.phtml
Sourceforge: http://sourceforge.net/users/slz
Gitorious: https://gitorious.org/~slz