From mboxrd@z Thu Jan 1 00:00:00 1970 From: yegorslists at googlemail.com Date: Tue, 7 Feb 2012 17:16:19 +0100 Subject: [Buildroot] [PATCH 1/2] udev: bump to 181 and other fixes Message-ID: <1328631380-12272-1-git-send-email-yegorslists@googlemail.com> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: buildroot@busybox.net From: "Arnout Vandecappelle (Essensium/Mind)" Changes: - Linux kernel requirement: 2.6.34 and above (devtmpfs is mandatory) (this also applies to the chosen toolchain, because of Kernel headers) - optional dependency on libusb and usbutils removed - added dependency on kmod - added dependency on util-linux for libblkid - install in /lib/udev instead of /usr/libexec/udev - udevd moved to /lib/udev - fixed path to pci.ids and usb.ids - persistent rules generator is disabled by default, so option is introduced to enable this option if desired Signed-off-by: Yegor Yefremov Signed-off-by: Arnout Vandecappelle (Essensium/Mind) --- package/udev/Config.in | 26 +++++++++++++++++--------- package/udev/S10udev | 4 ++-- package/udev/udev.mk | 20 ++++++++++++-------- target/generic/Config.in | 2 ++ 4 files changed, 33 insertions(+), 19 deletions(-) diff --git a/package/udev/Config.in b/package/udev/Config.in index 391c718..dfb4f0d 100644 --- a/package/udev/Config.in +++ b/package/udev/Config.in @@ -1,31 +1,39 @@ config BR2_PACKAGE_UDEV bool "udev" depends on BR2_ROOTFS_DEVICE_CREATION_DYNAMIC_UDEV + depends on BR2_LARGEFILE # util-linux + depends on BR2_USE_WCHAR # util-linux + select BR2_PACKAGE_UTIL_LINUX + select BR2_PACKAGE_UTIL_LINUX_LIBBLKID + select BR2_PACKAGE_KMOD help Userspace device daemon. + udev requires a Linux kernel >= 2.6.34: it relies on devtmpfs. + ftp://ftp.kernel.org/pub/linux/utils/kernel/hotplug/ if BR2_PACKAGE_UDEV +config BR2_PACKAGE_UDEV_RULES_GEN + bool "enable rules generator" + help + Enable persistant rules generator + config BR2_PACKAGE_UDEV_ALL_EXTRAS bool "enable all extras" - depends on BR2_LARGEFILE # acl - depends on BR2_USE_WCHAR # libglib2 select BR2_PACKAGE_ACL - select BR2_PACKAGE_LIBUSB - select BR2_PACKAGE_LIBUSB_COMPAT - select BR2_PACKAGE_USBUTILS select BR2_PACKAGE_HWDATA select BR2_PACKAGE_LIBGLIB2 help Enable all extras with external dependencies like - libacl, libusb, libusb-compat, usbutils, hwdata - -comment "udev extras requires a toolchain with LARGEFILE + WCHAR support" - depends on !(BR2_LARGEFILE && BR2_USE_WCHAR) + libacl, hwdata and libglib2 endif comment "udev requires /dev mgmnt set to udev under System configuration" depends on !BR2_ROOTFS_DEVICE_CREATION_DYNAMIC_UDEV + +comment "udev requires a toolchain with LARGEFILE + WCHAR support" + depends on !(BR2_LARGEFILE && BR2_USE_WCHAR) + diff --git a/package/udev/S10udev b/package/udev/S10udev index 29eb107..70a7c34 100755 --- a/package/udev/S10udev +++ b/package/udev/S10udev @@ -2,7 +2,7 @@ # # udev This is a minimal non-LSB version of a UDEV startup script. It # was derived by stripping down the udev-058 LSB version for use -# with buildroot on embedded hardware using Linux 2.6.12+ kernels. +# with buildroot on embedded hardware using Linux 2.6.34+ kernels. # # You may need to customize this for your system's resource limits # (including startup time!) and administration. For example, if @@ -17,7 +17,7 @@ # # Check for missing binaries -UDEV_BIN=/sbin/udevd +UDEV_BIN=/lib/udev/udevd test -x $UDEV_BIN || exit 5 # Check for config file and read it diff --git a/package/udev/udev.mk b/package/udev/udev.mk index 1825396..88df268 100644 --- a/package/udev/udev.mk +++ b/package/udev/udev.mk @@ -3,7 +3,7 @@ # udev # ############################################################# -UDEV_VERSION = 173 +UDEV_VERSION = 181 UDEV_SOURCE = udev-$(UDEV_VERSION).tar.bz2 UDEV_SITE = $(BR2_KERNEL_MIRROR)/linux/utils/kernel/hotplug/ UDEV_INSTALL_STAGING = YES @@ -11,20 +11,24 @@ UDEV_INSTALL_STAGING = YES UDEV_CONF_OPT = \ --sbindir=/sbin \ --with-rootlibdir=/lib \ - --libexecdir=/lib/udev \ + --libexecdir=/lib \ + --with-usb-ids-path=/usr/share/hwdata/usb.ids \ + --with-pci-ids-path=/usr/share/hwdata/pci.ids \ + --with-firmware-path=/lib/firmware \ --disable-introspection -UDEV_DEPENDENCIES = host-gperf host-pkg-config +UDEV_DEPENDENCIES = host-gperf host-pkg-config util-linux kmod + +ifeq ($(BR2_PACKAGE_UDEV_RULES_GEN),y) +UDEV_CONF_OPT += --enable-rule_generator +endif ifeq ($(BR2_PACKAGE_UDEV_ALL_EXTRAS),y) -UDEV_DEPENDENCIES += libusb libusb-compat acl usbutils hwdata libglib2 -UDEV_CONF_OPT += \ - --with-pci-ids-path=$(TARGET_DIR)/usr/share/hwdata/pci.ids \ - --with-usb-ids-path=$(TARGET_DIR)/usr/share/hwdata/usb.ids \ +UDEV_DEPENDENCIES += acl usbutils hwdata libglib2 +UDEV_CONF_OPT += \ --enable-udev_acl else UDEV_CONF_OPT += \ - --disable-hwdb \ --disable-gudev endif diff --git a/target/generic/Config.in b/target/generic/Config.in index a91de32..5334a4b 100644 --- a/target/generic/Config.in +++ b/target/generic/Config.in @@ -28,6 +28,8 @@ config BR2_ROOTFS_DEVICE_CREATION_DYNAMIC_MDEV config BR2_ROOTFS_DEVICE_CREATION_DYNAMIC_UDEV bool "Dynamic using udev" + depends on BR2_LARGEFILE # udev + depends on BR2_USE_WCHAR # udev select BR2_PACKAGE_UDEV endchoice -- 1.7.5.4